diff options
Diffstat (limited to 'drivers/input')
26 files changed, 1741 insertions, 668 deletions
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index bef317ff7352..b9f01bd1b7ef 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -96,7 +96,7 @@ struct gpio_keys_drvdata { * Return value of this function can be used to allocate bitmap * large enough to hold all bits for given type. */ -static inline int get_n_events_by_type(int type) +static int get_n_events_by_type(int type) { BUG_ON(type != EV_SW && type != EV_KEY); @@ -104,6 +104,22 @@ static inline int get_n_events_by_type(int type) } /** + * get_bm_events_by_type() - returns bitmap of supported events per @type + * @input: input device from which bitmap is retrieved + * @type: type of button (%EV_KEY, %EV_SW) + * + * Return value of this function can be used to allocate bitmap + * large enough to hold all bits for given type. + */ +static const unsigned long *get_bm_events_by_type(struct input_dev *dev, + int type) +{ + BUG_ON(type != EV_SW && type != EV_KEY); + + return (type == EV_KEY) ? dev->keybit : dev->swbit; +} + +/** * gpio_keys_disable_button() - disables given GPIO button * @bdata: button data for button to be disabled * @@ -213,6 +229,7 @@ static ssize_t gpio_keys_attr_store_helper(struct gpio_keys_drvdata *ddata, const char *buf, unsigned int type) { int n_events = get_n_events_by_type(type); + const unsigned long *bitmap = get_bm_events_by_type(ddata->input, type); unsigned long *bits; ssize_t error; int i; @@ -226,6 +243,11 @@ static ssize_t gpio_keys_attr_store_helper(struct gpio_keys_drvdata *ddata, goto out; /* First validate */ + if (!bitmap_subset(bits, bitmap, n_events)) { + error = -EINVAL; + goto out; + } + for (i = 0; i < ddata->pdata->nbuttons; i++) { struct gpio_button_data *bdata = &ddata->data[i]; @@ -239,11 +261,6 @@ static ssize_t gpio_keys_attr_store_helper(struct gpio_keys_drvdata *ddata, } } - if (i == ddata->pdata->nbuttons) { - error = -EINVAL; - goto out; - } - mutex_lock(&ddata->disable_lock); for (i = 0; i < ddata->pdata->nbuttons; i++) { diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c index 7502e46165fa..e0d72c8c01e4 100644 --- a/drivers/input/keyboard/omap-keypad.c +++ b/drivers/input/keyboard/omap-keypad.c @@ -155,14 +155,6 @@ static void omap_kp_tasklet(unsigned long data) "pressed" : "released"); #else key = keycodes[MATRIX_SCAN_CODE(row, col, row_shift)]; - if (key < 0) { - printk(KERN_WARNING - "omap-keypad: Spurious key event %d-%d\n", - col, row); - /* We scan again after a couple of seconds */ - spurious = 1; - continue; - } if (!(kp_cur_group == (key & GROUP_MASK) || kp_cur_group == -1)) @@ -292,8 +284,8 @@ static int omap_kp_probe(struct platform_device *pdev) setup_timer(&omap_kp->timer, omap_kp_timer, (unsigned long)omap_kp); /* get the irq and init timer*/ - tasklet_enable(&kp_tasklet); kp_tasklet.data = (unsigned long) omap_kp; + tasklet_enable(&kp_tasklet); ret = device_create_file(&pdev->dev, &dev_attr_enable); if (ret < 0) diff --git a/drivers/input/misc/bma150.c b/drivers/input/misc/bma150.c index 1d0e61d7c131..b0d445390ee4 100644 --- a/drivers/input/misc/bma150.c +++ b/drivers/input/misc/bma150.c @@ -147,7 +147,7 @@ struct bma150_data { * are stated and verified by Bosch Sensortec where they are configured * to provide a generic sensitivity performance. */ -static struct bma150_cfg default_cfg = { +static const struct bma150_cfg default_cfg = { .any_motion_int = 1, .hg_int = 1, .lg_int = 1, diff --git a/drivers/input/misc/da9063_onkey.c b/drivers/input/misc/da9063_onkey.c index 8eb697db82d0..bb863e062b03 100644 --- a/drivers/input/misc/da9063_onkey.c +++ b/drivers/input/misc/da9063_onkey.c @@ -179,13 +179,13 @@ static irqreturn_t da9063_onkey_irq_handler(int irq, void *data) input_report_key(onkey->input, KEY_POWER, 1); input_sync(onkey->input); schedule_delayed_work(&onkey->work, 0); - dev_dbg(onkey->dev, "KEY_POWER pressed.\n"); + dev_dbg(onkey->dev, "KEY_POWER long press.\n"); } else { - input_report_key(onkey->input, KEY_SLEEP, 1); + input_report_key(onkey->input, KEY_POWER, 1); input_sync(onkey->input); - input_report_key(onkey->input, KEY_SLEEP, 0); + input_report_key(onkey->input, KEY_POWER, 0); input_sync(onkey->input); - dev_dbg(onkey->dev, "KEY_SLEEP pressed.\n"); + dev_dbg(onkey->dev, "KEY_POWER short press.\n"); } return IRQ_HANDLED; diff --git a/drivers/input/misc/sparcspkr.c b/drivers/input/misc/sparcspkr.c index 6f997aa49183..4a5afc7fe96e 100644 --- a/drivers/input/misc/sparcspkr.c +++ b/drivers/input/misc/sparcspkr.c @@ -345,23 +345,19 @@ static struct platform_driver grover_beep_driver = { .shutdown = sparcspkr_shutdown, }; +static struct platform_driver * const drivers[] = { + &bbc_beep_driver, + &grover_beep_driver, +}; + static int __init sparcspkr_init(void) { - int err = platform_driver_register(&bbc_beep_driver); - - if (!err) { - err = platform_driver_register(&grover_beep_driver); - if (err) - platform_driver_unregister(&bbc_beep_driver); - } - - return err; + return platform_register_drivers(drivers, ARRAY_SIZE(drivers)); } static void __exit sparcspkr_exit(void) { - platform_driver_unregister(&bbc_beep_driver); - platform_driver_unregister(&grover_beep_driver); + platform_unregister_drivers(drivers, ARRAY_SIZE(drivers)); } module_init(sparcspkr_init); diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c index 5adbcedcb81c..4eb9e4d94f46 100644 --- a/drivers/input/misc/uinput.c +++ b/drivers/input/misc/uinput.c @@ -256,13 +256,29 @@ static void uinput_destroy_device(struct uinput_device *udev) static int uinput_create_device(struct uinput_device *udev) { struct input_dev *dev = udev->dev; - int error; + int error, nslot; if (udev->state != UIST_SETUP_COMPLETE) { printk(KERN_DEBUG "%s: write device info first\n", UINPUT_NAME); return -EINVAL; } + if (test_bit(ABS_MT_SLOT, dev->absbit)) { + nslot = input_abs_get_max(dev, ABS_MT_SLOT) + 1; + error = input_mt_init_slots(dev, nslot, 0); + if (error) + goto fail1; + } else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) { + input_set_events_per_packet(dev, 60); + } + + if (test_bit(EV_FF, dev->evbit) && !udev->ff_effects_max) { + printk(KERN_DEBUG "%s: ff_effects_max should be non-zero when FF_BIT is set\n", + UINPUT_NAME); + error = -EINVAL; + goto fail1; + } + if (udev->ff_effects_max) { error = input_ff_create(dev, udev->ff_effects_max); if (error) @@ -308,10 +324,35 @@ static int uinput_open(struct inode *inode, struct file *file) return 0; } +static int uinput_validate_absinfo(struct input_dev *dev, unsigned int code, + const struct input_absinfo *abs) +{ + int min, max; + + min = abs->minimum; + max = abs->maximum; + + if ((min != 0 || max != 0) && max <= min) { + printk(KERN_DEBUG + "%s: invalid abs[%02x] min:%d max:%d\n", + UINPUT_NAME, code, min, max); + return -EINVAL; + } + + if (abs->flat > max - min) { + printk(KERN_DEBUG + "%s: abs_flat #%02x out of range: %d (min:%d/max:%d)\n", + UINPUT_NAME, code, abs->flat, min, max); + return -EINVAL; + } + + return 0; +} + static int uinput_validate_absbits(struct input_dev *dev) { unsigned int cnt; - int nslot; + int error; if (!test_bit(EV_ABS, dev->evbit)) return 0; @@ -321,38 +362,12 @@ static int uinput_validate_absbits(struct input_dev *dev) */ for_each_set_bit(cnt, dev->absbit, ABS_CNT) { - int min, max; - - min = input_abs_get_min(dev, cnt); - max = input_abs_get_max(dev, cnt); - - if ((min != 0 || max != 0) && max <= min) { - printk(KERN_DEBUG - "%s: invalid abs[%02x] min:%d max:%d\n", - UINPUT_NAME, cnt, - input_abs_get_min(dev, cnt), - input_abs_get_max(dev, cnt)); + if (!dev->absinfo) return -EINVAL; - } - if (input_abs_get_flat(dev, cnt) > - input_abs_get_max(dev, cnt) - input_abs_get_min(dev, cnt)) { - printk(KERN_DEBUG - "%s: abs_flat #%02x out of range: %d " - "(min:%d/max:%d)\n", - UINPUT_NAME, cnt, - input_abs_get_flat(dev, cnt), - input_abs_get_min(dev, cnt), - input_abs_get_max(dev, cnt)); - return -EINVAL; - } - } - - if (test_bit(ABS_MT_SLOT, dev->absbit)) { - nslot = input_abs_get_max(dev, ABS_MT_SLOT) + 1; - input_mt_init_slots(dev, nslot, 0); - } else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) { - input_set_events_per_packet(dev, 60); + error = uinput_validate_absinfo(dev, cnt, &dev->absinfo[cnt]); + if (error) + return error; } return 0; @@ -370,8 +385,71 @@ static int uinput_allocate_device(struct uinput_device *udev) return 0; } -static int uinput_setup_device(struct uinput_device *udev, - const char __user *buffer, size_t count) +static int uinput_dev_setup(struct uinput_device *udev, + struct uinput_setup __user *arg) +{ + struct uinput_setup setup; + struct input_dev *dev; + + if (udev->state == UIST_CREATED) + return -EINVAL; + + if (copy_from_user(&setup, arg, sizeof(setup))) + return -EFAULT; + + if (!setup.name[0]) + return -EINVAL; + + dev = udev->dev; + dev->id = setup.id; + udev->ff_effects_max = setup.ff_effects_max; + + kfree(dev->name); + dev->name = kstrndup(setup.name, UINPUT_MAX_NAME_SIZE, GFP_KERNEL); + if (!dev->name) + return -ENOMEM; + + udev->state = UIST_SETUP_COMPLETE; + return 0; +} + +static int uinput_abs_setup(struct uinput_device *udev, + struct uinput_setup __user *arg, size_t size) +{ + struct uinput_abs_setup setup = {}; + struct input_dev *dev; + int error; + + if (size > sizeof(setup)) + return -E2BIG; + + if (udev->state == UIST_CREATED) + return -EINVAL; + + if (copy_from_user(&setup, arg, size)) + return -EFAULT; + + if (setup.code > ABS_MAX) + return -ERANGE; + + dev = udev->dev; + + error = uinput_validate_absinfo(dev, setup.code, &setup.absinfo); + if (error) + return error; + + input_alloc_absinfo(dev); + if (!dev->absinfo) + return -ENOMEM; + + set_bit(setup.code, dev->absbit); + dev->absinfo[setup.code] = setup.absinfo; + return 0; +} + +/* legacy setup via write() */ +static int uinput_setup_device_legacy(struct uinput_device *udev, + const char __user *buffer, size_t count) { struct uinput_user_dev *user_dev; struct input_dev *dev; @@ -474,7 +552,7 @@ static ssize_t uinput_write(struct file *file, const char __user *buffer, retval = udev->state == UIST_CREATED ? uinput_inject_events(udev, buffer, count) : - uinput_setup_device(udev, buffer, count); + uinput_setup_device_legacy(udev, buffer, count); mutex_unlock(&udev->mutex); @@ -735,6 +813,12 @@ static long uinput_ioctl_handler(struct file *file, unsigned int cmd, uinput_destroy_device(udev); goto out; + case UI_DEV_SETUP: + retval = uinput_dev_setup(udev, p); + goto out; + + /* UI_ABS_SETUP is handled in the variable size ioctls */ + case UI_SET_EVBIT: retval = uinput_set_bit(arg, evbit, EV_MAX); goto out; @@ -879,6 +963,10 @@ static long uinput_ioctl_handler(struct file *file, unsigned int cmd, name = dev_name(&udev->dev->dev); retval = uinput_str_to_user(p, name, size); goto out; + + case UI_ABS_SETUP & ~IOCSIZE_MASK: + retval = uinput_abs_setup(udev, p, size); + goto out; } retval = -EINVAL; diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 41e6cb501e6a..936f07a4e35f 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -31,6 +31,7 @@ #define ALPS_CMD_NIBBLE_10 0x01f2 #define ALPS_REG_BASE_RUSHMORE 0xc2c0 +#define ALPS_REG_BASE_V7 0xc2c0 #define ALPS_REG_BASE_PINNACLE 0x0000 static const struct alps_nibble_commands alps_v3_nibble_commands[] = { @@ -2047,7 +2048,7 @@ static int alps_absolute_mode_v3(struct psmouse *psmouse) return 0; } -static int alps_probe_trackstick_v3(struct psmouse *psmouse, int reg_base) +static int alps_probe_trackstick_v3_v7(struct psmouse *psmouse, int reg_base) { int ret = -EIO, reg_val; @@ -2128,15 +2129,12 @@ error: static int alps_hw_init_v3(struct psmouse *psmouse) { + struct alps_data *priv = psmouse->private; struct ps2dev *ps2dev = &psmouse->ps2dev; int reg_val; unsigned char param[4]; - reg_val = alps_probe_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE); - if (reg_val == -EIO) - goto error; - - if (reg_val == 0 && + if ((priv->flags & ALPS_DUALPOINT) && alps_setup_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE) == -EIO) goto error; @@ -2613,6 +2611,11 @@ static int alps_set_protocol(struct psmouse *psmouse, priv->decode_fields = alps_decode_pinnacle; priv->nibble_commands = alps_v3_nibble_commands; priv->addr_command = PSMOUSE_CMD_RESET_WRAP; + + if (alps_probe_trackstick_v3_v7(psmouse, + ALPS_REG_BASE_PINNACLE) < 0) + priv->flags &= ~ALPS_DUALPOINT; + break; case ALPS_PROTO_V3_RUSHMORE: @@ -2625,8 +2628,8 @@ static int alps_set_protocol(struct psmouse *psmouse, priv->x_bits = 16; priv->y_bits = 12; - if (alps_probe_trackstick_v3(psmouse, - ALPS_REG_BASE_RUSHMORE) < 0) + if (alps_probe_trackstick_v3_v7(psmouse, + ALPS_REG_BASE_RUSHMORE) < 0) priv->flags &= ~ALPS_DUALPOINT; break; @@ -2676,6 +2679,9 @@ static int alps_set_protocol(struct psmouse *psmouse, if (priv->fw_ver[1] != 0xba) priv->flags |= ALPS_BUTTONPAD; + if (alps_probe_trackstick_v3_v7(psmouse, ALPS_REG_BASE_V7) < 0) + priv->flags &= ~ALPS_DUALPOINT; + break; case ALPS_PROTO_V8: diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 537ebb0e193a..78f93cf68840 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1222,7 +1222,7 @@ static int elantech_set_input_params(struct psmouse *psmouse) input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2, ETP_WMAX_V2, 0, 0); } - input_mt_init_slots(dev, 2, 0); + input_mt_init_slots(dev, 2, INPUT_MT_SEMI_MT); input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0); input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0); break; diff --git a/drivers/input/mouse/focaltech.c b/drivers/input/mouse/focaltech.c index 4d5576de81be..c8c6a8cc329d 100644 --- a/drivers/input/mouse/focaltech.c +++ b/drivers/input/mouse/focaltech.c @@ -49,12 +49,6 @@ int focaltech_detect(struct psmouse *psmouse, bool set_properties) return 0; } -static void focaltech_reset(struct psmouse *psmouse) -{ - ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); - psmouse_reset(psmouse); -} - #ifdef CONFIG_MOUSE_PS2_FOCALTECH /* @@ -300,6 +294,12 @@ static int focaltech_switch_protocol(struct psmouse *psmouse) return 0; } +static void focaltech_reset(struct psmouse *psmouse) +{ + ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); + psmouse_reset(psmouse); +} + static void focaltech_disconnect(struct psmouse *psmouse) { focaltech_reset(psmouse); @@ -456,14 +456,4 @@ fail: kfree(priv); return error; } - -#else /* CONFIG_MOUSE_PS2_FOCALTECH */ - -int focaltech_init(struct psmouse *psmouse) -{ - focaltech_reset(psmouse); - - return 0; -} - #endif /* CONFIG_MOUSE_PS2_FOCALTECH */ diff --git a/drivers/input/mouse/focaltech.h b/drivers/input/mouse/focaltech.h index ca61ebff373e..783b28e8e10b 100644 --- a/drivers/input/mouse/focaltech.h +++ b/drivers/input/mouse/focaltech.h @@ -18,6 +18,14 @@ #define _FOCALTECH_H int focaltech_detect(struct psmouse *psmouse, bool set_properties); + +#ifdef CONFIG_MOUSE_PS2_FOCALTECH int focaltech_init(struct psmouse *psmouse); +#else +static inline int focaltech_init(struct psmouse *psmouse) +{ + return -ENOSYS; +} +#endif #endif diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c index 136e222e2a16..422da1cd9e76 100644 --- a/drivers/input/mouse/logips2pp.c +++ b/drivers/input/mouse/logips2pp.c @@ -325,7 +325,7 @@ static void ps2pp_set_model_properties(struct psmouse *psmouse, * that support it. */ -int ps2pp_init(struct psmouse *psmouse, bool set_properties) +int ps2pp_detect(struct psmouse *psmouse, bool set_properties) { struct ps2dev *ps2dev = &psmouse->ps2dev; unsigned char param[4]; diff --git a/drivers/input/mouse/logips2pp.h b/drivers/input/mouse/logips2pp.h index 0c186f0282d9..bf629453e095 100644 --- a/drivers/input/mouse/logips2pp.h +++ b/drivers/input/mouse/logips2pp.h @@ -12,9 +12,9 @@ #define _LOGIPS2PP_H #ifdef CONFIG_MOUSE_PS2_LOGIPS2PP -int ps2pp_init(struct psmouse *psmouse, bool set_properties); +int ps2pp_detect(struct psmouse *psmouse, bool set_properties); #else -inline int ps2pp_init(struct psmouse *psmouse, bool set_properties) +static inline int ps2pp_detect(struct psmouse *psmouse, bool set_properties) { return -ENOSYS; } diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index ad18dab0ac47..b9e4ee34c132 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -119,6 +119,7 @@ struct psmouse_protocol { enum psmouse_type type; bool maxproto; bool ignore_parity; /* Protocol should ignore parity errors from KBC */ + bool try_passthru; /* Try protocol also on passthrough ports */ const char *name; const char *alias; int (*detect)(struct psmouse *, bool); @@ -129,7 +130,6 @@ struct psmouse_protocol { * psmouse_process_byte() analyzes the PS/2 data stream and reports * relevant events to the input module once full packet has arrived. */ - psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse) { struct input_dev *dev = psmouse->dev; @@ -138,22 +138,16 @@ psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse) if (psmouse->pktcnt < psmouse->pktsize) return PSMOUSE_GOOD_DATA; -/* - * Full packet accumulated, process it - */ + /* Full packet accumulated, process it */ -/* - * Scroll wheel on IntelliMice, scroll buttons on NetMice - */ - - if (psmouse->type == PSMOUSE_IMPS || psmouse->type == PSMOUSE_GENPS) + switch (psmouse->type) { + case PSMOUSE_IMPS: + /* IntelliMouse has scroll wheel */ input_report_rel(dev, REL_WHEEL, -(signed char) packet[3]); + break; -/* - * Scroll wheel and buttons on IntelliMouse Explorer - */ - - if (psmouse->type == PSMOUSE_IMEX) { + case PSMOUSE_IMEX: + /* Scroll wheel and buttons on IntelliMouse Explorer */ switch (packet[3] & 0xC0) { case 0x80: /* vertical scroll on IntelliMouse Explorer 4.0 */ input_report_rel(dev, REL_WHEEL, (int) (packet[3] & 32) - (int) (packet[3] & 31)); @@ -168,39 +162,42 @@ psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse) input_report_key(dev, BTN_EXTRA, (packet[3] >> 5) & 1); break; } - } + break; -/* - * Extra buttons on Genius NewNet 3D - */ + case PSMOUSE_GENPS: + /* Report scroll buttons on NetMice */ + input_report_rel(dev, REL_WHEEL, -(signed char) packet[3]); - if (psmouse->type == PSMOUSE_GENPS) { + /* Extra buttons on Genius NewNet 3D */ input_report_key(dev, BTN_SIDE, (packet[0] >> 6) & 1); input_report_key(dev, BTN_EXTRA, (packet[0] >> 7) & 1); - } + break; -/* - * Extra button on ThinkingMouse - */ - if (psmouse->type == PSMOUSE_THINKPS) { + case PSMOUSE_THINKPS: + /* Extra button on ThinkingMouse */ input_report_key(dev, BTN_EXTRA, (packet[0] >> 3) & 1); - /* Without this bit of weirdness moving up gives wildly high Y changes. */ + + /* + * Without this bit of weirdness moving up gives wildly + * high Y changes. + */ packet[1] |= (packet[0] & 0x40) << 1; - } + break; -/* - * Cortron PS2 Trackball reports SIDE button on the 4th bit of the first - * byte. - */ - if (psmouse->type == PSMOUSE_CORTRON) { + case PSMOUSE_CORTRON: + /* + * Cortron PS2 Trackball reports SIDE button in the + * 4th bit of the first byte. + */ input_report_key(dev, BTN_SIDE, (packet[0] >> 3) & 1); packet[0] |= 0x08; - } + break; -/* - * Generic PS/2 Mouse - */ + default: + break; + } + /* Generic PS/2 Mouse */ input_report_key(dev, BTN_LEFT, packet[0] & 1); input_report_key(dev, BTN_MIDDLE, (packet[0] >> 2) & 1); input_report_key(dev, BTN_RIGHT, (packet[0] >> 1) & 1); @@ -222,7 +219,6 @@ void psmouse_queue_work(struct psmouse *psmouse, struct delayed_work *work, /* * __psmouse_set_state() sets new psmouse state and resets all flags. */ - static inline void __psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state) { psmouse->state = new_state; @@ -231,13 +227,11 @@ static inline void __psmouse_set_state(struct psmouse *psmouse, enum psmouse_sta psmouse->last = jiffies; } - /* * psmouse_set_state() sets new psmouse state and resets all flags and * counters while holding serio lock so fighting with interrupt handler * is not a concern. */ - void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state) { serio_pause_rx(psmouse->ps2dev.serio); @@ -249,7 +243,6 @@ void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state) * psmouse_handle_byte() processes one byte of the input data stream * by calling corresponding protocol handler. */ - static int psmouse_handle_byte(struct psmouse *psmouse) { psmouse_ret_t rc = psmouse->protocol_handler(psmouse); @@ -292,7 +285,6 @@ static int psmouse_handle_byte(struct psmouse *psmouse) * psmouse_interrupt() handles incoming characters, either passing them * for normal processing or gathering them as command response. */ - static irqreturn_t psmouse_interrupt(struct serio *serio, unsigned char data, unsigned int flags) { @@ -335,9 +327,8 @@ static irqreturn_t psmouse_interrupt(struct serio *serio, } psmouse->packet[psmouse->pktcnt++] = data; -/* - * Check if this is a new device announcement (0xAA 0x00) - */ + + /* Check if this is a new device announcement (0xAA 0x00) */ if (unlikely(psmouse->packet[0] == PSMOUSE_RET_BAT && psmouse->pktcnt <= 2)) { if (psmouse->pktcnt == 1) { psmouse->last = jiffies; @@ -351,9 +342,8 @@ static irqreturn_t psmouse_interrupt(struct serio *serio, serio_reconnect(serio); goto out; } -/* - * Not a new device, try processing first byte normally - */ + + /* Not a new device, try processing first byte normally */ psmouse->pktcnt = 1; if (psmouse_handle_byte(psmouse)) goto out; @@ -361,9 +351,10 @@ static irqreturn_t psmouse_interrupt(struct serio *serio, psmouse->packet[psmouse->pktcnt++] = data; } -/* - * See if we need to force resync because mouse was idle for too long - */ + /* + * See if we need to force resync because mouse was idle for + * too long. + */ if (psmouse->state == PSMOUSE_ACTIVATED && psmouse->pktcnt == 1 && psmouse->resync_time && time_after(jiffies, psmouse->last + psmouse->resync_time * HZ)) { @@ -380,7 +371,6 @@ static irqreturn_t psmouse_interrupt(struct serio *serio, return IRQ_HANDLED; } - /* * psmouse_sliced_command() sends an extended PS/2 command to the mouse * using sliced syntax, understood by advanced devices, such as Logitech @@ -404,7 +394,6 @@ int psmouse_sliced_command(struct psmouse *psmouse, unsigned char command) return 0; } - /* * psmouse_reset() resets the mouse into power-on state. */ @@ -424,7 +413,6 @@ int psmouse_reset(struct psmouse *psmouse) /* * Here we set the mouse resolution. */ - void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution) { static const unsigned char params[] = { 0, 1, 2, 2, 3 }; @@ -441,7 +429,6 @@ void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution) /* * Here we set the mouse report rate. */ - static void psmouse_set_rate(struct psmouse *psmouse, unsigned int rate) { static const unsigned char rates[] = { 200, 100, 80, 60, 40, 20, 10, 0 }; @@ -457,7 +444,6 @@ static void psmouse_set_rate(struct psmouse *psmouse, unsigned int rate) /* * Here we set the mouse scaling. */ - static void psmouse_set_scale(struct psmouse *psmouse, enum psmouse_scale scale) { ps2_command(&psmouse->ps2dev, NULL, @@ -468,7 +454,6 @@ static void psmouse_set_scale(struct psmouse *psmouse, enum psmouse_scale scale) /* * psmouse_poll() - default poll handler. Everyone except for ALPS uses it. */ - static int psmouse_poll(struct psmouse *psmouse) { return ps2_command(&psmouse->ps2dev, psmouse->packet, @@ -602,7 +587,7 @@ static int im_explorer_detect(struct psmouse *psmouse, bool set_properties) if (param[0] != 4) return -1; -/* Magic to enable horizontal scrolling on IntelliMouse 4.0 */ + /* Magic to enable horizontal scrolling on IntelliMouse 4.0 */ param[0] = 200; ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); param[0] = 80; @@ -672,10 +657,10 @@ static int ps2bare_detect(struct psmouse *psmouse, bool set_properties) if (!psmouse->name) psmouse->name = "Mouse"; -/* - * We have no way of figuring true number of buttons so let's - * assume that the device has 3. - */ + /* + * We have no way of figuring true number of buttons so let's + * assume that the device has 3. + */ __set_bit(BTN_MIDDLE, psmouse->dev->keybit); } @@ -699,284 +684,6 @@ static int cortron_detect(struct psmouse *psmouse, bool set_properties) return 0; } -/* - * Apply default settings to the psmouse structure. Most of them will - * be overridden by individual protocol initialization routines. - */ - -static void psmouse_apply_defaults(struct psmouse *psmouse) -{ - struct input_dev *input_dev = psmouse->dev; - - memset(input_dev->evbit, 0, sizeof(input_dev->evbit)); - memset(input_dev->keybit, 0, sizeof(input_dev->keybit)); - memset(input_dev->relbit, 0, sizeof(input_dev->relbit)); - memset(input_dev->absbit, 0, sizeof(input_dev->absbit)); - memset(input_dev->mscbit, 0, sizeof(input_dev->mscbit)); - - __set_bit(EV_KEY, input_dev->evbit); - __set_bit(EV_REL, input_dev->evbit); - - __set_bit(BTN_LEFT, input_dev->keybit); - __set_bit(BTN_RIGHT, input_dev->keybit); - - __set_bit(REL_X, input_dev->relbit); - __set_bit(REL_Y, input_dev->relbit); - - __set_bit(INPUT_PROP_POINTER, input_dev->propbit); - - psmouse->set_rate = psmouse_set_rate; - psmouse->set_resolution = psmouse_set_resolution; - psmouse->set_scale = psmouse_set_scale; - psmouse->poll = psmouse_poll; - psmouse->protocol_handler = psmouse_process_byte; - psmouse->pktsize = 3; - psmouse->reconnect = NULL; - psmouse->disconnect = NULL; - psmouse->cleanup = NULL; - psmouse->pt_activate = NULL; - psmouse->pt_deactivate = NULL; -} - -/* - * Apply default settings to the psmouse structure and call specified - * protocol detection or initialization routine. - */ -static int psmouse_do_detect(int (*detect)(struct psmouse *psmouse, - bool set_properties), - struct psmouse *psmouse, bool set_properties) -{ - if (set_properties) - psmouse_apply_defaults(psmouse); - - return detect(psmouse, set_properties); -} - -/* - * psmouse_extensions() probes for any extensions to the basic PS/2 protocol - * the mouse may have. - */ - -static int psmouse_extensions(struct psmouse *psmouse, - unsigned int max_proto, bool set_properties) -{ - bool synaptics_hardware = false; - -/* Always check for focaltech, this is safe as it uses pnp-id matching */ - if (psmouse_do_detect(focaltech_detect, psmouse, set_properties) == 0) { - if (max_proto > PSMOUSE_IMEX) { - if (!set_properties || focaltech_init(psmouse) == 0) { - if (IS_ENABLED(CONFIG_MOUSE_PS2_FOCALTECH)) - return PSMOUSE_FOCALTECH; - /* - * Note that we need to also restrict - * psmouse_max_proto so that psmouse_initialize() - * does not try to reset rate and resolution, - * because even that upsets the device. - */ - psmouse_max_proto = PSMOUSE_PS2; - return PSMOUSE_PS2; - } - } - } - -/* - * We always check for lifebook because it does not disturb mouse - * (it only checks DMI information). - */ - if (psmouse_do_detect(lifebook_detect, psmouse, set_properties) == 0) { - if (max_proto > PSMOUSE_IMEX) { - if (!set_properties || lifebook_init(psmouse) == 0) - return PSMOUSE_LIFEBOOK; - } - } - - if (psmouse_do_detect(vmmouse_detect, psmouse, set_properties) == 0) { - if (max_proto > PSMOUSE_IMEX) { - if (!set_properties || vmmouse_init(psmouse) == 0) - return PSMOUSE_VMMOUSE; - } - } - -/* - * Try Kensington ThinkingMouse (we try first, because synaptics probe - * upsets the thinkingmouse). - */ - - if (max_proto > PSMOUSE_IMEX && - psmouse_do_detect(thinking_detect, psmouse, set_properties) == 0) { - return PSMOUSE_THINKPS; - } - -/* - * Try Synaptics TouchPad. Note that probing is done even if Synaptics protocol - * support is disabled in config - we need to know if it is synaptics so we - * can reset it properly after probing for intellimouse. - */ - if (max_proto > PSMOUSE_PS2 && - psmouse_do_detect(synaptics_detect, psmouse, set_properties) == 0) { - synaptics_hardware = true; - - if (max_proto > PSMOUSE_IMEX) { -/* - * Try activating protocol, but check if support is enabled first, since - * we try detecting Synaptics even when protocol is disabled. - */ - if (IS_ENABLED(CONFIG_MOUSE_PS2_SYNAPTICS) && - (!set_properties || synaptics_init(psmouse) == 0)) { - return PSMOUSE_SYNAPTICS; - } - -/* - * Some Synaptics touchpads can emulate extended protocols (like IMPS/2). - * Unfortunately Logitech/Genius probes confuse some firmware versions so - * we'll have to skip them. - */ - max_proto = PSMOUSE_IMEX; - } -/* - * Make sure that touchpad is in relative mode, gestures (taps) are enabled - */ - synaptics_reset(psmouse); - } - -/* - * Try Cypress Trackpad. - * Must try it before Finger Sensing Pad because Finger Sensing Pad probe - * upsets some modules of Cypress Trackpads. - */ - if (max_proto > PSMOUSE_IMEX && - cypress_detect(psmouse, set_properties) == 0) { - if (IS_ENABLED(CONFIG_MOUSE_PS2_CYPRESS)) { - if (cypress_init(psmouse) == 0) - return PSMOUSE_CYPRESS; - - /* - * Finger Sensing Pad probe upsets some modules of - * Cypress Trackpad, must avoid Finger Sensing Pad - * probe if Cypress Trackpad device detected. - */ - return PSMOUSE_PS2; - } - - max_proto = PSMOUSE_IMEX; - } - -/* - * Try ALPS TouchPad - */ - if (max_proto > PSMOUSE_IMEX) { - ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); - if (psmouse_do_detect(alps_detect, - psmouse, set_properties) == 0) { - if (!set_properties || alps_init(psmouse) == 0) - return PSMOUSE_ALPS; -/* - * Init failed, try basic relative protocols - */ - max_proto = PSMOUSE_IMEX; - } - } - -/* - * Try OLPC HGPK touchpad. - */ - if (max_proto > PSMOUSE_IMEX && - psmouse_do_detect(hgpk_detect, psmouse, set_properties) == 0) { - if (!set_properties || hgpk_init(psmouse) == 0) - return PSMOUSE_HGPK; -/* - * Init failed, try basic relative protocols - */ - max_proto = PSMOUSE_IMEX; - } - -/* - * Try Elantech touchpad. - */ - if (max_proto > PSMOUSE_IMEX && - psmouse_do_detect(elantech_detect, psmouse, set_properties) == 0) { - if (!set_properties || elantech_init(psmouse) == 0) - return PSMOUSE_ELANTECH; -/* - * Init failed, try basic relative protocols - */ - max_proto = PSMOUSE_IMEX; - } - - if (max_proto > PSMOUSE_IMEX) { - if (psmouse_do_detect(genius_detect, - psmouse, set_properties) == 0) - return PSMOUSE_GENPS; - - if (psmouse_do_detect(ps2pp_init, - psmouse, set_properties) == 0) - return PSMOUSE_PS2PP; - - if (psmouse_do_detect(trackpoint_detect, - psmouse, set_properties) == 0) - return PSMOUSE_TRACKPOINT; - - if (psmouse_do_detect(touchkit_ps2_detect, - psmouse, set_properties) == 0) - return PSMOUSE_TOUCHKIT_PS2; - } - -/* - * Try Finger Sensing Pad. We do it here because its probe upsets - * Trackpoint devices (causing TP_READ_ID command to time out). - */ - if (max_proto > PSMOUSE_IMEX) { - if (psmouse_do_detect(fsp_detect, - psmouse, set_properties) == 0) { - if (!set_properties || fsp_init(psmouse) == 0) - return PSMOUSE_FSP; -/* - * Init failed, try basic relative protocols - */ - max_proto = PSMOUSE_IMEX; - } - } - -/* - * Reset to defaults in case the device got confused by extended - * protocol probes. Note that we follow up with full reset because - * some mice put themselves to sleep when they see PSMOUSE_RESET_DIS. - */ - ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); - psmouse_reset(psmouse); - - if (max_proto >= PSMOUSE_IMEX && - psmouse_do_detect(im_explorer_detect, - psmouse, set_properties) == 0) { - return PSMOUSE_IMEX; - } - - if (max_proto >= PSMOUSE_IMPS && - psmouse_do_detect(intellimouse_detect, - psmouse, set_properties) == 0) { - return PSMOUSE_IMPS; - } - -/* - * Okay, all failed, we have a standard mouse here. The number of the buttons - * is still a question, though. We assume 3. - */ - psmouse_do_detect(ps2bare_detect, psmouse, set_properties); - - if (synaptics_hardware) { -/* - * We detected Synaptics hardware but it did not respond to IMPS/2 probes. - * We need to reset the touchpad because if there is a track point on the - * pass through port it could get disabled while probing for protocol - * extensions. - */ - psmouse_reset(psmouse); - } - - return PSMOUSE_PS2; -} - static const struct psmouse_protocol psmouse_protocols[] = { { .type = PSMOUSE_PS2, @@ -985,13 +692,14 @@ static const struct psmouse_protocol psmouse_protocols[] = { .maxproto = true, .ignore_parity = true, .detect = ps2bare_detect, + .try_passthru = true, }, #ifdef CONFIG_MOUSE_PS2_LOGIPS2PP { .type = PSMOUSE_PS2PP, .name = "PS2++", .alias = "logitech", - .detect = ps2pp_init, + .detect = ps2pp_detect, }, #endif { @@ -1022,6 +730,7 @@ static const struct psmouse_protocol psmouse_protocols[] = { .maxproto = true, .ignore_parity = true, .detect = intellimouse_detect, + .try_passthru = true, }, { .type = PSMOUSE_IMEX, @@ -1030,6 +739,7 @@ static const struct psmouse_protocol psmouse_protocols[] = { .maxproto = true, .ignore_parity = true, .detect = im_explorer_detect, + .try_passthru = true, }, #ifdef CONFIG_MOUSE_PS2_SYNAPTICS { @@ -1061,6 +771,7 @@ static const struct psmouse_protocol psmouse_protocols[] = { .type = PSMOUSE_LIFEBOOK, .name = "LBPS/2", .alias = "lifebook", + .detect = lifebook_detect, .init = lifebook_init, }, #endif @@ -1070,6 +781,7 @@ static const struct psmouse_protocol psmouse_protocols[] = { .name = "TPPS/2", .alias = "trackpoint", .detect = trackpoint_detect, + .try_passthru = true, }, #endif #ifdef CONFIG_MOUSE_PS2_TOUCHKIT @@ -1138,7 +850,7 @@ static const struct psmouse_protocol psmouse_protocols[] = { }, }; -static const struct psmouse_protocol *psmouse_protocol_by_type(enum psmouse_type type) +static const struct psmouse_protocol *__psmouse_protocol_by_type(enum psmouse_type type) { int i; @@ -1146,6 +858,17 @@ static const struct psmouse_protocol *psmouse_protocol_by_type(enum psmouse_type if (psmouse_protocols[i].type == type) return &psmouse_protocols[i]; + return NULL; +} + +static const struct psmouse_protocol *psmouse_protocol_by_type(enum psmouse_type type) +{ + const struct psmouse_protocol *proto; + + proto = __psmouse_protocol_by_type(type); + if (proto) + return proto; + WARN_ON(1); return &psmouse_protocols[0]; } @@ -1166,23 +889,288 @@ static const struct psmouse_protocol *psmouse_protocol_by_name(const char *name, return NULL; } +/* + * Apply default settings to the psmouse structure. Most of them will + * be overridden by individual protocol initialization routines. + */ +static void psmouse_apply_defaults(struct psmouse *psmouse) +{ + struct input_dev *input_dev = psmouse->dev; + + memset(input_dev->evbit, 0, sizeof(input_dev->evbit)); + memset(input_dev->keybit, 0, sizeof(input_dev->keybit)); + memset(input_dev->relbit, 0, sizeof(input_dev->relbit)); + memset(input_dev->absbit, 0, sizeof(input_dev->absbit)); + memset(input_dev->mscbit, 0, sizeof(input_dev->mscbit)); + + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(EV_REL, input_dev->evbit); + + __set_bit(BTN_LEFT, input_dev->keybit); + __set_bit(BTN_RIGHT, input_dev->keybit); + + __set_bit(REL_X, input_dev->relbit); + __set_bit(REL_Y, input_dev->relbit); + + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + + psmouse->set_rate = psmouse_set_rate; + psmouse->set_resolution = psmouse_set_resolution; + psmouse->set_scale = psmouse_set_scale; + psmouse->poll = psmouse_poll; + psmouse->protocol_handler = psmouse_process_byte; + psmouse->pktsize = 3; + psmouse->reconnect = NULL; + psmouse->disconnect = NULL; + psmouse->cleanup = NULL; + psmouse->pt_activate = NULL; + psmouse->pt_deactivate = NULL; +} + +static bool psmouse_try_protocol(struct psmouse *psmouse, + enum psmouse_type type, + unsigned int *max_proto, + bool set_properties, bool init_allowed) +{ + const struct psmouse_protocol *proto; + + proto = __psmouse_protocol_by_type(type); + if (!proto) + return false; + + if (psmouse->ps2dev.serio->id.type == SERIO_PS_PSTHRU && + !proto->try_passthru) { + return false; + } + + if (set_properties) + psmouse_apply_defaults(psmouse); + + if (proto->detect(psmouse, set_properties) != 0) + return false; + + if (set_properties && proto->init && init_allowed) { + if (proto->init(psmouse) != 0) { + /* + * We detected device, but init failed. Adjust + * max_proto so we only try standard protocols. + */ + if (*max_proto > PSMOUSE_IMEX) + *max_proto = PSMOUSE_IMEX; + + return false; + } + } + + return true; +} /* - * psmouse_probe() probes for a PS/2 mouse. + * psmouse_extensions() probes for any extensions to the basic PS/2 protocol + * the mouse may have. */ +static int psmouse_extensions(struct psmouse *psmouse, + unsigned int max_proto, bool set_properties) +{ + bool synaptics_hardware = false; + + /* + * Always check for focaltech, this is safe as it uses pnp-id + * matching. + */ + if (psmouse_try_protocol(psmouse, PSMOUSE_FOCALTECH, + &max_proto, set_properties, false)) { + if (max_proto > PSMOUSE_IMEX && + IS_ENABLED(CONFIG_MOUSE_PS2_FOCALTECH) && + (!set_properties || focaltech_init(psmouse) == 0)) { + return PSMOUSE_FOCALTECH; + } + /* + * Restrict psmouse_max_proto so that psmouse_initialize() + * does not try to reset rate and resolution, because even + * that upsets the device. + * This also causes us to basically fall through to basic + * protocol detection, where we fully reset the mouse, + * and set it up as bare PS/2 protocol device. + */ + psmouse_max_proto = max_proto = PSMOUSE_PS2; + } + + /* + * We always check for LifeBook because it does not disturb mouse + * (it only checks DMI information). + */ + if (psmouse_try_protocol(psmouse, PSMOUSE_LIFEBOOK, &max_proto, + set_properties, max_proto > PSMOUSE_IMEX)) + return PSMOUSE_LIFEBOOK; + if (psmouse_try_protocol(psmouse, PSMOUSE_VMMOUSE, &max_proto, + set_properties, max_proto > PSMOUSE_IMEX)) + return PSMOUSE_VMMOUSE; + + /* + * Try Kensington ThinkingMouse (we try first, because Synaptics + * probe upsets the ThinkingMouse). + */ + if (max_proto > PSMOUSE_IMEX && + psmouse_try_protocol(psmouse, PSMOUSE_THINKPS, &max_proto, + set_properties, true)) { + return PSMOUSE_THINKPS; + } + + /* + * Try Synaptics TouchPad. Note that probing is done even if + * Synaptics protocol support is disabled in config - we need to + * know if it is Synaptics so we can reset it properly after + * probing for IntelliMouse. + */ + if (max_proto > PSMOUSE_PS2 && + psmouse_try_protocol(psmouse, PSMOUSE_SYNAPTICS, &max_proto, + set_properties, false)) { + synaptics_hardware = true; + + if (max_proto > PSMOUSE_IMEX) { + /* + * Try activating protocol, but check if support is + * enabled first, since we try detecting Synaptics + * even when protocol is disabled. + */ + if (IS_ENABLED(CONFIG_MOUSE_PS2_SYNAPTICS) && + (!set_properties || synaptics_init(psmouse) == 0)) { + return PSMOUSE_SYNAPTICS; + } + + /* + * Some Synaptics touchpads can emulate extended + * protocols (like IMPS/2). Unfortunately + * Logitech/Genius probes confuse some firmware + * versions so we'll have to skip them. + */ + max_proto = PSMOUSE_IMEX; + } + + /* + * Make sure that touchpad is in relative mode, gestures + * (taps) are enabled. + */ + synaptics_reset(psmouse); + } + + /* + * Try Cypress Trackpad. We must try it before Finger Sensing Pad + * because Finger Sensing Pad probe upsets some modules of Cypress + * Trackpads. + */ + if (max_proto > PSMOUSE_IMEX && + psmouse_try_protocol(psmouse, PSMOUSE_CYPRESS, &max_proto, + set_properties, true)) { + return PSMOUSE_CYPRESS; + } + + /* Try ALPS TouchPad */ + if (max_proto > PSMOUSE_IMEX) { + ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); + if (psmouse_try_protocol(psmouse, PSMOUSE_ALPS, + &max_proto, set_properties, true)) + return PSMOUSE_ALPS; + } + + /* Try OLPC HGPK touchpad */ + if (max_proto > PSMOUSE_IMEX && + psmouse_try_protocol(psmouse, PSMOUSE_HGPK, &max_proto, + set_properties, true)) { + return PSMOUSE_HGPK; + } + + /* Try Elantech touchpad */ + if (max_proto > PSMOUSE_IMEX && + psmouse_try_protocol(psmouse, PSMOUSE_ELANTECH, + &max_proto, set_properties, true)) { + return PSMOUSE_ELANTECH; + } + + if (max_proto > PSMOUSE_IMEX) { + if (psmouse_try_protocol(psmouse, PSMOUSE_GENPS, + &max_proto, set_properties, true)) + return PSMOUSE_GENPS; + + if (psmouse_try_protocol(psmouse, PSMOUSE_PS2PP, + &max_proto, set_properties, true)) + return PSMOUSE_PS2PP; + + if (psmouse_try_protocol(psmouse, PSMOUSE_TRACKPOINT, + &max_proto, set_properties, true)) + return PSMOUSE_TRACKPOINT; + + if (psmouse_try_protocol(psmouse, PSMOUSE_TOUCHKIT_PS2, + &max_proto, set_properties, true)) + return PSMOUSE_TOUCHKIT_PS2; + } + + /* + * Try Finger Sensing Pad. We do it here because its probe upsets + * Trackpoint devices (causing TP_READ_ID command to time out). + */ + if (max_proto > PSMOUSE_IMEX && + psmouse_try_protocol(psmouse, PSMOUSE_FSP, + &max_proto, set_properties, true)) { + return PSMOUSE_FSP; + } + + /* + * Reset to defaults in case the device got confused by extended + * protocol probes. Note that we follow up with full reset because + * some mice put themselves to sleep when they see PSMOUSE_RESET_DIS. + */ + ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); + psmouse_reset(psmouse); + + if (max_proto >= PSMOUSE_IMEX && + psmouse_try_protocol(psmouse, PSMOUSE_IMEX, + &max_proto, set_properties, true)) { + return PSMOUSE_IMEX; + } + + if (max_proto >= PSMOUSE_IMPS && + psmouse_try_protocol(psmouse, PSMOUSE_IMPS, + &max_proto, set_properties, true)) { + return PSMOUSE_IMPS; + } + + /* + * Okay, all failed, we have a standard mouse here. The number of + * the buttons is still a question, though. We assume 3. + */ + psmouse_try_protocol(psmouse, PSMOUSE_PS2, + &max_proto, set_properties, true); + + if (synaptics_hardware) { + /* + * We detected Synaptics hardware but it did not respond to + * IMPS/2 probes. We need to reset the touchpad because if + * there is a track point on the pass through port it could + * get disabled while probing for protocol extensions. + */ + psmouse_reset(psmouse); + } + + return PSMOUSE_PS2; +} + +/* + * psmouse_probe() probes for a PS/2 mouse. + */ static int psmouse_probe(struct psmouse *psmouse) { struct ps2dev *ps2dev = &psmouse->ps2dev; unsigned char param[2]; -/* - * First, we check if it's a mouse. It should send 0x00 or 0x03 - * in case of an IntelliMouse in 4-byte mode or 0x04 for IM Explorer. - * Sunrex K8561 IR Keyboard/Mouse reports 0xff on second and subsequent - * ID queries, probably due to a firmware bug. - */ - + /* + * First, we check if it's a mouse. It should send 0x00 or 0x03 in + * case of an IntelliMouse in 4-byte mode or 0x04 for IM Explorer. + * Sunrex K8561 IR Keyboard/Mouse reports 0xff on second and + * subsequent ID queries, probably due to a firmware bug. + */ param[0] = 0xa5; if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETID)) return -1; @@ -1191,10 +1179,10 @@ static int psmouse_probe(struct psmouse *psmouse) param[0] != 0x04 && param[0] != 0xff) return -1; -/* - * Then we reset and disable the mouse so that it doesn't generate events. - */ - + /* + * Then we reset and disable the mouse so that it doesn't generate + * events. + */ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_DIS)) psmouse_warn(psmouse, "Failed to reset mouse on %s\n", ps2dev->serio->phys); @@ -1205,13 +1193,11 @@ static int psmouse_probe(struct psmouse *psmouse) /* * psmouse_initialize() initializes the mouse to a sane state. */ - static void psmouse_initialize(struct psmouse *psmouse) { -/* - * We set the mouse report rate, resolution and scaling. - */ - + /* + * We set the mouse report rate, resolution and scaling. + */ if (psmouse_max_proto != PSMOUSE_PS2) { psmouse->set_rate(psmouse, psmouse->rate); psmouse->set_resolution(psmouse, psmouse->resolution); @@ -1222,7 +1208,6 @@ static void psmouse_initialize(struct psmouse *psmouse) /* * psmouse_activate() enables the mouse so that we get motion reports from it. */ - int psmouse_activate(struct psmouse *psmouse) { if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE)) { @@ -1236,10 +1221,9 @@ int psmouse_activate(struct psmouse *psmouse) } /* - * psmouse_deactivate() puts the mouse into poll mode so that we don't get motion - * reports from it unless we explicitly request it. + * psmouse_deactivate() puts the mouse into poll mode so that we don't get + * motion reports from it unless we explicitly request it. */ - int psmouse_deactivate(struct psmouse *psmouse) { if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE)) { @@ -1252,11 +1236,9 @@ int psmouse_deactivate(struct psmouse *psmouse) return 0; } - /* * psmouse_resync() attempts to re-validate current protocol. */ - static void psmouse_resync(struct work_struct *work) { struct psmouse *parent = NULL, *psmouse = @@ -1276,16 +1258,16 @@ static void psmouse_resync(struct work_struct *work) psmouse_deactivate(parent); } -/* - * Some mice don't ACK commands sent while they are in the middle of - * transmitting motion packet. To avoid delay we use ps2_sendbyte() - * instead of ps2_command() which would wait for 200ms for an ACK - * that may never come. - * As an additional quirk ALPS touchpads may not only forget to ACK - * disable command but will stop reporting taps, so if we see that - * mouse at least once ACKs disable we will do full reconnect if ACK - * is missing. - */ + /* + * Some mice don't ACK commands sent while they are in the middle of + * transmitting motion packet. To avoid delay we use ps2_sendbyte() + * instead of ps2_command() which would wait for 200ms for an ACK + * that may never come. + * As an additional quirk ALPS touchpads may not only forget to ACK + * disable command but will stop reporting taps, so if we see that + * mouse at least once ACKs disable we will do full reconnect if ACK + * is missing. + */ psmouse->num_resyncs++; if (ps2_sendbyte(&psmouse->ps2dev, PSMOUSE_CMD_DISABLE, 20)) { @@ -1294,13 +1276,13 @@ static void psmouse_resync(struct work_struct *work) } else psmouse->acks_disable_command = true; -/* - * Poll the mouse. If it was reset the packet will be shorter than - * psmouse->pktsize and ps2_command will fail. We do not expect and - * do not handle scenario when mouse "upgrades" its protocol while - * disconnected since it would require additional delay. If we ever - * see a mouse that does it we'll adjust the code. - */ + /* + * Poll the mouse. If it was reset the packet will be shorter than + * psmouse->pktsize and ps2_command will fail. We do not expect and + * do not handle scenario when mouse "upgrades" its protocol while + * disconnected since it would require additional delay. If we ever + * see a mouse that does it we'll adjust the code. + */ if (!failed) { if (psmouse->poll(psmouse)) failed = true; @@ -1317,11 +1299,12 @@ static void psmouse_resync(struct work_struct *work) psmouse_set_state(psmouse, PSMOUSE_RESYNCING); } } -/* - * Now try to enable mouse. We try to do that even if poll failed and also - * repeat our attempts 5 times, otherwise we may be left out with disabled - * mouse. - */ + + /* + * Now try to enable mouse. We try to do that even if poll failed + * and also repeat our attempts 5 times, otherwise we may be left + * out with disabled mouse. + */ for (i = 0; i < 5; i++) { if (!ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE)) { enabled = true; @@ -1353,7 +1336,6 @@ static void psmouse_resync(struct work_struct *work) /* * psmouse_cleanup() resets the mouse into power-on state. */ - static void psmouse_cleanup(struct serio *serio) { struct psmouse *psmouse = serio_get_drvdata(serio); @@ -1378,15 +1360,15 @@ static void psmouse_cleanup(struct serio *serio) if (psmouse->cleanup) psmouse->cleanup(psmouse); -/* - * Reset the mouse to defaults (bare PS/2 protocol). - */ + /* + * Reset the mouse to defaults (bare PS/2 protocol). + */ ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); -/* - * Some boxes, such as HP nx7400, get terribly confused if mouse - * is not fully enabled before suspending/shutting down. - */ + /* + * Some boxes, such as HP nx7400, get terribly confused if mouse + * is not fully enabled before suspending/shutting down. + */ ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE); if (parent) { @@ -1402,7 +1384,6 @@ static void psmouse_cleanup(struct serio *serio) /* * psmouse_disconnect() closes and frees. */ - static void psmouse_disconnect(struct serio *serio) { struct psmouse *psmouse, *parent = NULL; @@ -1602,7 +1583,6 @@ static int psmouse_connect(struct serio *serio, struct serio_driver *drv) goto out; } - static int psmouse_reconnect(struct serio *serio) { struct psmouse *psmouse = serio_get_drvdata(serio); diff --git a/drivers/input/serio/hyperv-keyboard.c b/drivers/input/serio/hyperv-keyboard.c index e74e5d6e5f9f..c948866edf87 100644 --- a/drivers/input/serio/hyperv-keyboard.c +++ b/drivers/input/serio/hyperv-keyboard.c @@ -412,16 +412,6 @@ static int hv_kbd_remove(struct hv_device *hv_dev) return 0; } -/* - * Keyboard GUID - * {f912ad6d-2b17-48ea-bd65-f927a61c7684} - */ -#define HV_KBD_GUID \ - .guid = { \ - 0x6d, 0xad, 0x12, 0xf9, 0x17, 0x2b, 0xea, 0x48, \ - 0xbd, 0x65, 0xf9, 0x27, 0xa6, 0x1c, 0x76, 0x84 \ - } - static const struct hv_vmbus_device_id id_table[] = { /* Keyboard guid */ { HV_KBD_GUID, }, diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index c11556563ef0..68f5f4a0f1e7 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -258,6 +258,13 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = { }, }, { + /* Fujitsu Lifebook U745 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U745"), + }, + }, + { /* Fujitsu T70H */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index ae33da7ab51f..53a97b379c9f 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -295,6 +295,16 @@ config TOUCHSCREEN_EGALAX To compile this driver as a module, choose M here: the module will be called egalax_ts. +config TOUCHSCREEN_EGALAX_SERIAL + tristate "EETI eGalax serial touchscreen" + select SERIO + help + Say Y here to enable support for serial connected EETI + eGalax touch panels. + + To compile this driver as a module, choose M here: the + module will be called egalax_ts_serial. + config TOUCHSCREEN_FT6236 tristate "FT6236 I2C touchscreen" depends on I2C @@ -324,6 +334,7 @@ config TOUCHSCREEN_FUJITSU config TOUCHSCREEN_GOODIX tristate "Goodix I2C touchscreen" depends on I2C + depends on GPIOLIB help Say Y here if you have the Goodix touchscreen (such as one installed in Onda v975w tablets) connected to your @@ -927,6 +938,22 @@ config TOUCHSCREEN_TOUCHIT213 To compile this driver as a module, choose M here: the module will be called touchit213. +config TOUCHSCREEN_TS4800 + tristate "TS-4800 touchscreen" + depends on HAS_IOMEM && OF + select MFD_SYSCON + select INPUT_POLLDEV + help + Say Y here if you have a touchscreen on a TS-4800 board. + + On TS-4800, the touchscreen is not handled directly by Linux but by + a companion FPGA. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called ts4800_ts. + config TOUCHSCREEN_TSC_SERIO tristate "TSC-10/25/40 serial touchscreen support" select SERIO diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index cbaa6abb08da..968ff12e3132 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o obj-$(CONFIG_TOUCHSCREEN_ELAN) += elants_i2c.o obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o obj-$(CONFIG_TOUCHSCREEN_EGALAX) += egalax_ts.o +obj-$(CONFIG_TOUCHSCREEN_EGALAX_SERIAL) += egalax_ts_serial.o obj-$(CONFIG_TOUCHSCREEN_FT6236) += ft6236.o obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix.o @@ -68,6 +69,7 @@ obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC) += ti_am335x_tsc.o obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o +obj-$(CONFIG_TOUCHSCREEN_TS4800) += ts4800-ts.o obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO) += tsc40.o obj-$(CONFIG_TOUCHSCREEN_TSC200X_CORE) += tsc200x-core.o obj-$(CONFIG_TOUCHSCREEN_TSC2004) += tsc2004.o diff --git a/drivers/input/touchscreen/egalax_ts_serial.c b/drivers/input/touchscreen/egalax_ts_serial.c new file mode 100644 index 000000000000..657bbae608c8 --- /dev/null +++ b/drivers/input/touchscreen/egalax_ts_serial.c @@ -0,0 +1,194 @@ +/* + * EETI Egalax serial touchscreen driver + * + * Copyright (c) 2015 Zoltán Böszörményi <zboszor@pr.hu> + * + * based on the + * + * Hampshire serial touchscreen driver (Copyright (c) 2010 Adam Bennett) + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/serio.h> + +#define DRIVER_DESC "EETI Egalax serial touchscreen driver" + +/* + * Definitions & global arrays. + */ + +#define EGALAX_FORMAT_MAX_LENGTH 6 +#define EGALAX_FORMAT_START_BIT BIT(7) +#define EGALAX_FORMAT_PRESSURE_BIT BIT(6) +#define EGALAX_FORMAT_TOUCH_BIT BIT(0) +#define EGALAX_FORMAT_RESOLUTION_MASK 0x06 + +#define EGALAX_MIN_XC 0 +#define EGALAX_MAX_XC 0x4000 +#define EGALAX_MIN_YC 0 +#define EGALAX_MAX_YC 0x4000 + +/* + * Per-touchscreen data. + */ +struct egalax { + struct input_dev *input; + struct serio *serio; + int idx; + u8 data[EGALAX_FORMAT_MAX_LENGTH]; + char phys[32]; +}; + +static void egalax_process_data(struct egalax *egalax) +{ + struct input_dev *dev = egalax->input; + u8 *data = egalax->data; + u16 x, y; + u8 shift; + u8 mask; + + shift = 3 - ((data[0] & EGALAX_FORMAT_RESOLUTION_MASK) >> 1); + mask = 0xff >> (shift + 1); + + x = (((u16)(data[1] & mask) << 7) | (data[2] & 0x7f)) << shift; + y = (((u16)(data[3] & mask) << 7) | (data[4] & 0x7f)) << shift; + + input_report_key(dev, BTN_TOUCH, data[0] & EGALAX_FORMAT_TOUCH_BIT); + input_report_abs(dev, ABS_X, x); + input_report_abs(dev, ABS_Y, y); + input_sync(dev); +} + +static irqreturn_t egalax_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct egalax *egalax = serio_get_drvdata(serio); + int pkt_len; + + egalax->data[egalax->idx++] = data; + + if (likely(egalax->data[0] & EGALAX_FORMAT_START_BIT)) { + pkt_len = egalax->data[0] & EGALAX_FORMAT_PRESSURE_BIT ? 6 : 5; + if (pkt_len == egalax->idx) { + egalax_process_data(egalax); + egalax->idx = 0; + } + } else { + dev_dbg(&serio->dev, "unknown/unsynchronized data: %x\n", + egalax->data[0]); + egalax->idx = 0; + } + + return IRQ_HANDLED; +} + +/* + * egalax_connect() is the routine that is called when someone adds a + * new serio device that supports egalax protocol and registers it as + * an input device. This is usually accomplished using inputattach. + */ +static int egalax_connect(struct serio *serio, struct serio_driver *drv) +{ + struct egalax *egalax; + struct input_dev *input_dev; + int error; + + egalax = kzalloc(sizeof(struct egalax), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!egalax || !input_dev) { + error = -ENOMEM; + goto err_free_mem; + } + + egalax->serio = serio; + egalax->input = input_dev; + snprintf(egalax->phys, sizeof(egalax->phys), + "%s/input0", serio->phys); + + input_dev->name = "EETI eGalaxTouch Serial TouchScreen"; + input_dev->phys = egalax->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_EGALAX; + input_dev->id.product = 0; + input_dev->id.version = 0x0001; + input_dev->dev.parent = &serio->dev; + + input_set_capability(input_dev, EV_KEY, BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, + EGALAX_MIN_XC, EGALAX_MAX_XC, 0, 0); + input_set_abs_params(input_dev, ABS_Y, + EGALAX_MIN_YC, EGALAX_MAX_YC, 0, 0); + + serio_set_drvdata(serio, egalax); + + error = serio_open(serio, drv); + if (error) + goto err_reset_drvdata; + + error = input_register_device(input_dev); + if (error) + goto err_close_serio; + + return 0; + +err_close_serio: + serio_close(serio); +err_reset_drvdata: + serio_set_drvdata(serio, NULL); +err_free_mem: + input_free_device(input_dev); + kfree(egalax); + return error; +} + +static void egalax_disconnect(struct serio *serio) +{ + struct egalax *egalax = serio_get_drvdata(serio); + + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_unregister_device(egalax->input); + kfree(egalax); +} + +/* + * The serio driver structure. + */ + +static const struct serio_device_id egalax_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_EGALAX, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, egalax_serio_ids); + +static struct serio_driver egalax_drv = { + .driver = { + .name = "egalax", + }, + .description = DRIVER_DESC, + .id_table = egalax_serio_ids, + .interrupt = egalax_interrupt, + .connect = egalax_connect, + .disconnect = egalax_disconnect, +}; +module_serio_driver(egalax_drv); + +MODULE_AUTHOR("Zoltán Böszörményi <zboszor@pr.hu>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 4d113c9e4b77..240b16f3ee97 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -2,6 +2,7 @@ * Driver for Goodix Touchscreens * * Copyright (c) 2014 Red Hat Inc. + * Copyright (c) 2015 K. Merker <merker@debian.org> * * This code is based on gt9xx.c authored by andrew@goodix.com: * @@ -16,6 +17,8 @@ #include <linux/kernel.h> #include <linux/dmi.h> +#include <linux/firmware.h> +#include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/input.h> #include <linux/input/mt.h> @@ -33,11 +36,24 @@ struct goodix_ts_data { struct input_dev *input_dev; int abs_x_max; int abs_y_max; + bool swapped_x_y; + bool inverted_x; + bool inverted_y; unsigned int max_touch_num; unsigned int int_trigger_type; - bool rotated_screen; + int cfg_len; + struct gpio_desc *gpiod_int; + struct gpio_desc *gpiod_rst; + u16 id; + u16 version; + const char *cfg_name; + struct completion firmware_loading_complete; + unsigned long irq_flags; }; +#define GOODIX_GPIO_INT_NAME "irq" +#define GOODIX_GPIO_RST_NAME "reset" + #define GOODIX_MAX_HEIGHT 4096 #define GOODIX_MAX_WIDTH 4096 #define GOODIX_INT_TRIGGER 1 @@ -45,8 +61,13 @@ struct goodix_ts_data { #define GOODIX_MAX_CONTACTS 10 #define GOODIX_CONFIG_MAX_LENGTH 240 +#define GOODIX_CONFIG_911_LENGTH 186 +#define GOODIX_CONFIG_967_LENGTH 228 /* Register defines */ +#define GOODIX_REG_COMMAND 0x8040 +#define GOODIX_CMD_SCREEN_OFF 0x05 + #define GOODIX_READ_COOR_ADDR 0x814E #define GOODIX_REG_CONFIG_DATA 0x8047 #define GOODIX_REG_ID 0x8140 @@ -115,6 +136,63 @@ static int goodix_i2c_read(struct i2c_client *client, return ret < 0 ? ret : (ret != ARRAY_SIZE(msgs) ? -EIO : 0); } +/** + * goodix_i2c_write - write data to a register of the i2c slave device. + * + * @client: i2c device. + * @reg: the register to write to. + * @buf: raw data buffer to write. + * @len: length of the buffer to write + */ +static int goodix_i2c_write(struct i2c_client *client, u16 reg, const u8 *buf, + unsigned len) +{ + u8 *addr_buf; + struct i2c_msg msg; + int ret; + + addr_buf = kmalloc(len + 2, GFP_KERNEL); + if (!addr_buf) + return -ENOMEM; + + addr_buf[0] = reg >> 8; + addr_buf[1] = reg & 0xFF; + memcpy(&addr_buf[2], buf, len); + + msg.flags = 0; + msg.addr = client->addr; + msg.buf = addr_buf; + msg.len = len + 2; + + ret = i2c_transfer(client->adapter, &msg, 1); + kfree(addr_buf); + return ret < 0 ? ret : (ret != 1 ? -EIO : 0); +} + +static int goodix_i2c_write_u8(struct i2c_client *client, u16 reg, u8 value) +{ + return goodix_i2c_write(client, reg, &value, sizeof(value)); +} + +static int goodix_get_cfg_len(u16 id) +{ + switch (id) { + case 911: + case 9271: + case 9110: + case 927: + case 928: + return GOODIX_CONFIG_911_LENGTH; + + case 912: + case 967: + return GOODIX_CONFIG_967_LENGTH; + + default: + return GOODIX_CONFIG_MAX_LENGTH; + } +} + static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data) { int touch_num; @@ -155,10 +233,13 @@ static void goodix_ts_report_touch(struct goodix_ts_data *ts, u8 *coor_data) int input_y = get_unaligned_le16(&coor_data[3]); int input_w = get_unaligned_le16(&coor_data[5]); - if (ts->rotated_screen) { + /* Inversions have to happen before axis swapping */ + if (ts->inverted_x) input_x = ts->abs_x_max - input_x; + if (ts->inverted_y) input_y = ts->abs_y_max - input_y; - } + if (ts->swapped_x_y) + swap(input_x, input_y); input_mt_slot(ts->input_dev, id); input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true); @@ -202,21 +283,195 @@ static void goodix_process_events(struct goodix_ts_data *ts) */ static irqreturn_t goodix_ts_irq_handler(int irq, void *dev_id) { - static const u8 end_cmd[] = { - GOODIX_READ_COOR_ADDR >> 8, - GOODIX_READ_COOR_ADDR & 0xff, - 0 - }; struct goodix_ts_data *ts = dev_id; goodix_process_events(ts); - if (i2c_master_send(ts->client, end_cmd, sizeof(end_cmd)) < 0) + if (goodix_i2c_write_u8(ts->client, GOODIX_READ_COOR_ADDR, 0) < 0) dev_err(&ts->client->dev, "I2C write end_cmd error\n"); return IRQ_HANDLED; } +static void goodix_free_irq(struct goodix_ts_data *ts) +{ + devm_free_irq(&ts->client->dev, ts->client->irq, ts); +} + +static int goodix_request_irq(struct goodix_ts_data *ts) +{ + return devm_request_threaded_irq(&ts->client->dev, ts->client->irq, + NULL, goodix_ts_irq_handler, + ts->irq_flags, ts->client->name, ts); +} + +/** + * goodix_check_cfg - Checks if config fw is valid + * + * @ts: goodix_ts_data pointer + * @cfg: firmware config data + */ +static int goodix_check_cfg(struct goodix_ts_data *ts, + const struct firmware *cfg) +{ + int i, raw_cfg_len; + u8 check_sum = 0; + + if (cfg->size > GOODIX_CONFIG_MAX_LENGTH) { + dev_err(&ts->client->dev, + "The length of the config fw is not correct"); + return -EINVAL; + } + + raw_cfg_len = cfg->size - 2; + for (i = 0; i < raw_cfg_len; i++) + check_sum += cfg->data[i]; + check_sum = (~check_sum) + 1; + if (check_sum != cfg->data[raw_cfg_len]) { + dev_err(&ts->client->dev, + "The checksum of the config fw is not correct"); + return -EINVAL; + } + + if (cfg->data[raw_cfg_len + 1] != 1) { + dev_err(&ts->client->dev, + "Config fw must have Config_Fresh register set"); + return -EINVAL; + } + + return 0; +} + +/** + * goodix_send_cfg - Write fw config to device + * + * @ts: goodix_ts_data pointer + * @cfg: config firmware to write to device + */ +static int goodix_send_cfg(struct goodix_ts_data *ts, + const struct firmware *cfg) +{ + int error; + + error = goodix_check_cfg(ts, cfg); + if (error) + return error; + + error = goodix_i2c_write(ts->client, GOODIX_REG_CONFIG_DATA, cfg->data, + cfg->size); + if (error) { + dev_err(&ts->client->dev, "Failed to write config data: %d", + error); + return error; + } + dev_dbg(&ts->client->dev, "Config sent successfully."); + + /* Let the firmware reconfigure itself, so sleep for 10ms */ + usleep_range(10000, 11000); + + return 0; +} + +static int goodix_int_sync(struct goodix_ts_data *ts) +{ + int error; + + error = gpiod_direction_output(ts->gpiod_int, 0); + if (error) + return error; + + msleep(50); /* T5: 50ms */ + + error = gpiod_direction_input(ts->gpiod_int); + if (error) + return error; + + return 0; +} + +/** + * goodix_reset - Reset device during power on + * + * @ts: goodix_ts_data pointer + */ +static int goodix_reset(struct goodix_ts_data *ts) +{ + int error; + + /* begin select I2C slave addr */ + error = gpiod_direction_output(ts->gpiod_rst, 0); + if (error) + return error; + + msleep(20); /* T2: > 10ms */ + + /* HIGH: 0x28/0x29, LOW: 0xBA/0xBB */ + error = gpiod_direction_output(ts->gpiod_int, ts->client->addr == 0x14); + if (error) + return error; + + usleep_range(100, 2000); /* T3: > 100us */ + + error = gpiod_direction_output(ts->gpiod_rst, 1); + if (error) + return error; + + usleep_range(6000, 10000); /* T4: > 5ms */ + + /* end select I2C slave addr */ + error = gpiod_direction_input(ts->gpiod_rst); + if (error) + return error; + + error = goodix_int_sync(ts); + if (error) + return error; + + return 0; +} + +/** + * goodix_get_gpio_config - Get GPIO config from ACPI/DT + * + * @ts: goodix_ts_data pointer + */ +static int goodix_get_gpio_config(struct goodix_ts_data *ts) +{ + int error; + struct device *dev; + struct gpio_desc *gpiod; + + if (!ts->client) + return -EINVAL; + dev = &ts->client->dev; + + /* Get the interrupt GPIO pin number */ + gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_INT_NAME, GPIOD_IN); + if (IS_ERR(gpiod)) { + error = PTR_ERR(gpiod); + if (error != -EPROBE_DEFER) + dev_dbg(dev, "Failed to get %s GPIO: %d\n", + GOODIX_GPIO_INT_NAME, error); + return error; + } + + ts->gpiod_int = gpiod; + + /* Get the reset line GPIO pin number */ + gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_RST_NAME, GPIOD_IN); + if (IS_ERR(gpiod)) { + error = PTR_ERR(gpiod); + if (error != -EPROBE_DEFER) + dev_dbg(dev, "Failed to get %s GPIO: %d\n", + GOODIX_GPIO_RST_NAME, error); + return error; + } + + ts->gpiod_rst = gpiod; + + return 0; +} + /** * goodix_read_config - Read the embedded configuration of the panel * @@ -230,14 +485,15 @@ static void goodix_read_config(struct goodix_ts_data *ts) int error; error = goodix_i2c_read(ts->client, GOODIX_REG_CONFIG_DATA, - config, - GOODIX_CONFIG_MAX_LENGTH); + config, ts->cfg_len); if (error) { dev_warn(&ts->client->dev, "Error reading config (%d), using defaults\n", error); ts->abs_x_max = GOODIX_MAX_WIDTH; ts->abs_y_max = GOODIX_MAX_HEIGHT; + if (ts->swapped_x_y) + swap(ts->abs_x_max, ts->abs_y_max); ts->int_trigger_type = GOODIX_INT_TRIGGER; ts->max_touch_num = GOODIX_MAX_CONTACTS; return; @@ -245,6 +501,8 @@ static void goodix_read_config(struct goodix_ts_data *ts) ts->abs_x_max = get_unaligned_le16(&config[RESOLUTION_LOC]); ts->abs_y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]); + if (ts->swapped_x_y) + swap(ts->abs_x_max, ts->abs_y_max); ts->int_trigger_type = config[TRIGGER_LOC] & 0x03; ts->max_touch_num = config[MAX_CONTACTS_LOC] & 0x0f; if (!ts->abs_x_max || !ts->abs_y_max || !ts->max_touch_num) { @@ -252,42 +510,45 @@ static void goodix_read_config(struct goodix_ts_data *ts) "Invalid config, using defaults\n"); ts->abs_x_max = GOODIX_MAX_WIDTH; ts->abs_y_max = GOODIX_MAX_HEIGHT; + if (ts->swapped_x_y) + swap(ts->abs_x_max, ts->abs_y_max); ts->max_touch_num = GOODIX_MAX_CONTACTS; } - ts->rotated_screen = dmi_check_system(rotated_screen); - if (ts->rotated_screen) + if (dmi_check_system(rotated_screen)) { + ts->inverted_x = true; + ts->inverted_y = true; dev_dbg(&ts->client->dev, "Applying '180 degrees rotated screen' quirk\n"); + } } /** * goodix_read_version - Read goodix touchscreen version * - * @client: the i2c client - * @version: output buffer containing the version on success - * @id: output buffer containing the id on success + * @ts: our goodix_ts_data pointer */ -static int goodix_read_version(struct i2c_client *client, u16 *version, u16 *id) +static int goodix_read_version(struct goodix_ts_data *ts) { int error; u8 buf[6]; char id_str[5]; - error = goodix_i2c_read(client, GOODIX_REG_ID, buf, sizeof(buf)); + error = goodix_i2c_read(ts->client, GOODIX_REG_ID, buf, sizeof(buf)); if (error) { - dev_err(&client->dev, "read version failed: %d\n", error); + dev_err(&ts->client->dev, "read version failed: %d\n", error); return error; } memcpy(id_str, buf, 4); id_str[4] = 0; - if (kstrtou16(id_str, 10, id)) - *id = 0x1001; + if (kstrtou16(id_str, 10, &ts->id)) + ts->id = 0x1001; - *version = get_unaligned_le16(&buf[4]); + ts->version = get_unaligned_le16(&buf[4]); - dev_info(&client->dev, "ID %d, version: %04x\n", *id, *version); + dev_info(&ts->client->dev, "ID %d, version: %04x\n", ts->id, + ts->version); return 0; } @@ -321,13 +582,10 @@ static int goodix_i2c_test(struct i2c_client *client) * goodix_request_input_dev - Allocate, populate and register the input device * * @ts: our goodix_ts_data pointer - * @version: device firmware version - * @id: device ID * * Must be called during probe */ -static int goodix_request_input_dev(struct goodix_ts_data *ts, u16 version, - u16 id) +static int goodix_request_input_dev(struct goodix_ts_data *ts) { int error; @@ -351,8 +609,8 @@ static int goodix_request_input_dev(struct goodix_ts_data *ts, u16 version, ts->input_dev->phys = "input/ts"; ts->input_dev->id.bustype = BUS_I2C; ts->input_dev->id.vendor = 0x0416; - ts->input_dev->id.product = id; - ts->input_dev->id.version = version; + ts->input_dev->id.product = ts->id; + ts->input_dev->id.version = ts->version; error = input_register_device(ts->input_dev); if (error) { @@ -364,13 +622,75 @@ static int goodix_request_input_dev(struct goodix_ts_data *ts, u16 version, return 0; } +/** + * goodix_configure_dev - Finish device initialization + * + * @ts: our goodix_ts_data pointer + * + * Must be called from probe to finish initialization of the device. + * Contains the common initialization code for both devices that + * declare gpio pins and devices that do not. It is either called + * directly from probe or from request_firmware_wait callback. + */ +static int goodix_configure_dev(struct goodix_ts_data *ts) +{ + int error; + + ts->swapped_x_y = device_property_read_bool(&ts->client->dev, + "touchscreen-swapped-x-y"); + ts->inverted_x = device_property_read_bool(&ts->client->dev, + "touchscreen-inverted-x"); + ts->inverted_y = device_property_read_bool(&ts->client->dev, + "touchscreen-inverted-y"); + + goodix_read_config(ts); + + error = goodix_request_input_dev(ts); + if (error) + return error; + + ts->irq_flags = goodix_irq_flags[ts->int_trigger_type] | IRQF_ONESHOT; + error = goodix_request_irq(ts); + if (error) { + dev_err(&ts->client->dev, "request IRQ failed: %d\n", error); + return error; + } + + return 0; +} + +/** + * goodix_config_cb - Callback to finish device init + * + * @ts: our goodix_ts_data pointer + * + * request_firmware_wait callback that finishes + * initialization of the device. + */ +static void goodix_config_cb(const struct firmware *cfg, void *ctx) +{ + struct goodix_ts_data *ts = ctx; + int error; + + if (cfg) { + /* send device configuration to the firmware */ + error = goodix_send_cfg(ts, cfg); + if (error) + goto err_release_cfg; + } + + goodix_configure_dev(ts); + +err_release_cfg: + release_firmware(cfg); + complete_all(&ts->firmware_loading_complete); +} + static int goodix_ts_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct goodix_ts_data *ts; - unsigned long irq_flags; int error; - u16 version_info, id_info; dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr); @@ -385,6 +705,20 @@ static int goodix_ts_probe(struct i2c_client *client, ts->client = client; i2c_set_clientdata(client, ts); + init_completion(&ts->firmware_loading_complete); + + error = goodix_get_gpio_config(ts); + if (error) + return error; + + if (ts->gpiod_int && ts->gpiod_rst) { + /* reset the controller */ + error = goodix_reset(ts); + if (error) { + dev_err(&client->dev, "Controller reset failed.\n"); + return error; + } + } error = goodix_i2c_test(client); if (error) { @@ -392,30 +726,125 @@ static int goodix_ts_probe(struct i2c_client *client, return error; } - error = goodix_read_version(client, &version_info, &id_info); + error = goodix_read_version(ts); if (error) { dev_err(&client->dev, "Read version failed.\n"); return error; } - goodix_read_config(ts); + ts->cfg_len = goodix_get_cfg_len(ts->id); + + if (ts->gpiod_int && ts->gpiod_rst) { + /* update device config */ + ts->cfg_name = devm_kasprintf(&client->dev, GFP_KERNEL, + "goodix_%d_cfg.bin", ts->id); + if (!ts->cfg_name) + return -ENOMEM; + + error = request_firmware_nowait(THIS_MODULE, true, ts->cfg_name, + &client->dev, GFP_KERNEL, ts, + goodix_config_cb); + if (error) { + dev_err(&client->dev, + "Failed to invoke firmware loader: %d\n", + error); + return error; + } - error = goodix_request_input_dev(ts, version_info, id_info); - if (error) - return error; + return 0; + } else { + error = goodix_configure_dev(ts); + if (error) + return error; + } + + return 0; +} + +static int goodix_ts_remove(struct i2c_client *client) +{ + struct goodix_ts_data *ts = i2c_get_clientdata(client); + + if (ts->gpiod_int && ts->gpiod_rst) + wait_for_completion(&ts->firmware_loading_complete); + + return 0; +} + +static int __maybe_unused goodix_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct goodix_ts_data *ts = i2c_get_clientdata(client); + int error; - irq_flags = goodix_irq_flags[ts->int_trigger_type] | IRQF_ONESHOT; - error = devm_request_threaded_irq(&ts->client->dev, client->irq, - NULL, goodix_ts_irq_handler, - irq_flags, client->name, ts); + /* We need gpio pins to suspend/resume */ + if (!ts->gpiod_int || !ts->gpiod_rst) + return 0; + + wait_for_completion(&ts->firmware_loading_complete); + + /* Free IRQ as IRQ pin is used as output in the suspend sequence */ + goodix_free_irq(ts); + + /* Output LOW on the INT pin for 5 ms */ + error = gpiod_direction_output(ts->gpiod_int, 0); if (error) { - dev_err(&client->dev, "request IRQ failed: %d\n", error); + goodix_request_irq(ts); return error; } + usleep_range(5000, 6000); + + error = goodix_i2c_write_u8(ts->client, GOODIX_REG_COMMAND, + GOODIX_CMD_SCREEN_OFF); + if (error) { + dev_err(&ts->client->dev, "Screen off command failed\n"); + gpiod_direction_input(ts->gpiod_int); + goodix_request_irq(ts); + return -EAGAIN; + } + + /* + * The datasheet specifies that the interval between sending screen-off + * command and wake-up should be longer than 58 ms. To avoid waking up + * sooner, delay 58ms here. + */ + msleep(58); + return 0; +} + +static int __maybe_unused goodix_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct goodix_ts_data *ts = i2c_get_clientdata(client); + int error; + + if (!ts->gpiod_int || !ts->gpiod_rst) + return 0; + + /* + * Exit sleep mode by outputting HIGH level to INT pin + * for 2ms~5ms. + */ + error = gpiod_direction_output(ts->gpiod_int, 1); + if (error) + return error; + + usleep_range(2000, 5000); + + error = goodix_int_sync(ts); + if (error) + return error; + + error = goodix_request_irq(ts); + if (error) + return error; + return 0; } +static SIMPLE_DEV_PM_OPS(goodix_pm_ops, goodix_suspend, goodix_resume); + static const struct i2c_device_id goodix_ts_id[] = { { "GDIX1001:00", 0 }, { } @@ -446,11 +875,13 @@ MODULE_DEVICE_TABLE(of, goodix_of_match); static struct i2c_driver goodix_ts_driver = { .probe = goodix_ts_probe, + .remove = goodix_ts_remove, .id_table = goodix_ts_id, .driver = { .name = "Goodix-TS", .acpi_match_table = ACPI_PTR(goodix_acpi_match), .of_match_table = of_match_ptr(goodix_of_match), + .pm = &goodix_pm_ops, }, }; module_i2c_driver(goodix_ts_driver); diff --git a/drivers/input/touchscreen/pcap_ts.c b/drivers/input/touchscreen/pcap_ts.c index 23a354a392ae..0e3fc419a3cf 100644 --- a/drivers/input/touchscreen/pcap_ts.c +++ b/drivers/input/touchscreen/pcap_ts.c @@ -87,7 +87,7 @@ static void pcap_ts_read_xy(void *data, u16 res[2]) static void pcap_ts_work(struct work_struct *work) { - struct delayed_work *dw = container_of(work, struct delayed_work, work); + struct delayed_work *dw = to_delayed_work(work); struct pcap_ts *pcap_ts = container_of(dw, struct pcap_ts, work); u8 ch[2]; diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c index 4b961ad9f0b5..09523a3d3f23 100644 --- a/drivers/input/touchscreen/pixcir_i2c_ts.c +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c @@ -38,6 +38,8 @@ struct pixcir_i2c_ts_data { struct input_dev *input; struct gpio_desc *gpio_attb; struct gpio_desc *gpio_reset; + struct gpio_desc *gpio_enable; + struct gpio_desc *gpio_wake; const struct pixcir_i2c_chip_data *chip; int max_fingers; /* Max fingers supported in this instance */ bool running; @@ -208,6 +210,11 @@ static int pixcir_set_power_mode(struct pixcir_i2c_ts_data *ts, struct device *dev = &ts->client->dev; int ret; + if (mode == PIXCIR_POWER_ACTIVE || mode == PIXCIR_POWER_IDLE) { + if (ts->gpio_wake) + gpiod_set_value_cansleep(ts->gpio_wake, 1); + } + ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_POWER_MODE); if (ret < 0) { dev_err(dev, "%s: can't read reg 0x%x : %d\n", @@ -228,6 +235,11 @@ static int pixcir_set_power_mode(struct pixcir_i2c_ts_data *ts, return ret; } + if (mode == PIXCIR_POWER_HALT) { + if (ts->gpio_wake) + gpiod_set_value_cansleep(ts->gpio_wake, 0); + } + return 0; } @@ -302,6 +314,11 @@ static int pixcir_start(struct pixcir_i2c_ts_data *ts) struct device *dev = &ts->client->dev; int error; + if (ts->gpio_enable) { + gpiod_set_value_cansleep(ts->gpio_enable, 1); + msleep(100); + } + /* LEVEL_TOUCH interrupt with active low polarity */ error = pixcir_set_int_mode(ts, PIXCIR_INT_LEVEL_TOUCH, 0); if (error) { @@ -343,6 +360,9 @@ static int pixcir_stop(struct pixcir_i2c_ts_data *ts) /* Wait till running ISR is complete */ synchronize_irq(ts->client->irq); + if (ts->gpio_enable) + gpiod_set_value_cansleep(ts->gpio_enable, 0); + return 0; } @@ -534,6 +554,27 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, return error; } + tsdata->gpio_wake = devm_gpiod_get_optional(dev, "wake", + GPIOD_OUT_HIGH); + if (IS_ERR(tsdata->gpio_wake)) { + error = PTR_ERR(tsdata->gpio_wake); + if (error != -EPROBE_DEFER) + dev_err(dev, "Failed to get wake gpio: %d\n", error); + return error; + } + + tsdata->gpio_enable = devm_gpiod_get_optional(dev, "enable", + GPIOD_OUT_HIGH); + if (IS_ERR(tsdata->gpio_enable)) { + error = PTR_ERR(tsdata->gpio_enable); + if (error != -EPROBE_DEFER) + dev_err(dev, "Failed to get enable gpio: %d\n", error); + return error; + } + + if (tsdata->gpio_enable) + msleep(100); + error = devm_request_threaded_irq(dev, client->irq, NULL, pixcir_ts_isr, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, client->name, tsdata); diff --git a/drivers/input/touchscreen/rohm_bu21023.c b/drivers/input/touchscreen/rohm_bu21023.c index ba6024f93469..611156a2ef80 100644 --- a/drivers/input/touchscreen/rohm_bu21023.c +++ b/drivers/input/touchscreen/rohm_bu21023.c @@ -725,7 +725,7 @@ static int rohm_ts_load_firmware(struct i2c_client *client, break; error = -EIO; - } while (++retry >= FIRMWARE_RETRY_MAX); + } while (++retry <= FIRMWARE_RETRY_MAX); out: error2 = i2c_smbus_write_byte_data(client, INT_MASK, INT_ALL); diff --git a/drivers/input/touchscreen/sur40.c b/drivers/input/touchscreen/sur40.c index d214f22ed305..b6c4d03de340 100644 --- a/drivers/input/touchscreen/sur40.c +++ b/drivers/input/touchscreen/sur40.c @@ -444,7 +444,7 @@ static void sur40_process_video(struct sur40_state *sur40) goto err_poll; /* mark as finished */ - v4l2_get_timestamp(&new_buf->vb.timestamp); + new_buf->vb.vb2_buf.timestamp = ktime_get_ns(); new_buf->vb.sequence = sur40->sequence++; new_buf->vb.field = V4L2_FIELD_NONE; vb2_buffer_done(&new_buf->vb.vb2_buf, VB2_BUF_STATE_DONE); @@ -644,22 +644,21 @@ static void sur40_disconnect(struct usb_interface *interface) * minimum number: many DMA engines need a minimum of 2 buffers in the * queue and you need to have another available for userspace processing. */ -static int sur40_queue_setup(struct vb2_queue *q, const void *parg, +static int sur40_queue_setup(struct vb2_queue *q, unsigned int *nbuffers, unsigned int *nplanes, unsigned int sizes[], void *alloc_ctxs[]) { - const struct v4l2_format *fmt = parg; struct sur40_state *sur40 = vb2_get_drv_priv(q); if (q->num_buffers + *nbuffers < 3) *nbuffers = 3 - q->num_buffers; + alloc_ctxs[0] = sur40->alloc_ctx; - if (fmt && fmt->fmt.pix.sizeimage < sur40_video_format.sizeimage) - return -EINVAL; + if (*nplanes) + return sizes[0] < sur40_video_format.sizeimage ? -EINVAL : 0; *nplanes = 1; - sizes[0] = fmt ? fmt->fmt.pix.sizeimage : sur40_video_format.sizeimage; - alloc_ctxs[0] = sur40->alloc_ctx; + sizes[0] = sur40_video_format.sizeimage; return 0; } diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c index 191a1b87895f..a21a07c3ab6d 100644 --- a/drivers/input/touchscreen/ti_am335x_tsc.c +++ b/drivers/input/touchscreen/ti_am335x_tsc.c @@ -273,8 +273,6 @@ static irqreturn_t titsc_irq(int irq, void *dev) status = titsc_readl(ts_dev, REG_RAWIRQSTATUS); if (status & IRQENB_HW_PEN) { ts_dev->pen_down = true; - titsc_writel(ts_dev, REG_IRQWAKEUP, 0x00); - titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN); irqclr |= IRQENB_HW_PEN; } diff --git a/drivers/input/touchscreen/ts4800-ts.c b/drivers/input/touchscreen/ts4800-ts.c new file mode 100644 index 000000000000..3c3dd78303be --- /dev/null +++ b/drivers/input/touchscreen/ts4800-ts.c @@ -0,0 +1,216 @@ +/* + * Touchscreen driver for the TS-4800 board + * + * Copyright (c) 2015 - Savoir-faire Linux + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/bitops.h> +#include <linux/input.h> +#include <linux/input-polldev.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +/* polling interval in ms */ +#define POLL_INTERVAL 3 + +#define DEBOUNCE_COUNT 1 + +/* sensor values are 12-bit wide */ +#define MAX_12BIT ((1 << 12) - 1) + +#define PENDOWN_MASK 0x1 + +#define X_OFFSET 0x0 +#define Y_OFFSET 0x2 + +struct ts4800_ts { + struct input_polled_dev *poll_dev; + struct device *dev; + char phys[32]; + + void __iomem *base; + struct regmap *regmap; + unsigned int reg; + unsigned int bit; + + bool pendown; + int debounce; +}; + +static void ts4800_ts_open(struct input_polled_dev *dev) +{ + struct ts4800_ts *ts = dev->private; + int ret; + + ts->pendown = false; + ts->debounce = DEBOUNCE_COUNT; + + ret = regmap_update_bits(ts->regmap, ts->reg, ts->bit, ts->bit); + if (ret) + dev_warn(ts->dev, "Failed to enable touchscreen\n"); +} + +static void ts4800_ts_close(struct input_polled_dev *dev) +{ + struct ts4800_ts *ts = dev->private; + int ret; + + ret = regmap_update_bits(ts->regmap, ts->reg, ts->bit, 0); + if (ret) + dev_warn(ts->dev, "Failed to disable touchscreen\n"); + +} + +static void ts4800_ts_poll(struct input_polled_dev *dev) +{ + struct input_dev *input_dev = dev->input; + struct ts4800_ts *ts = dev->private; + u16 last_x = readw(ts->base + X_OFFSET); + u16 last_y = readw(ts->base + Y_OFFSET); + bool pendown = last_x & PENDOWN_MASK; + + if (pendown) { + if (ts->debounce) { + ts->debounce--; + return; + } + + if (!ts->pendown) { + input_report_key(input_dev, BTN_TOUCH, 1); + ts->pendown = true; + } + + last_x = ((~last_x) >> 4) & MAX_12BIT; + last_y = ((~last_y) >> 4) & MAX_12BIT; + + input_report_abs(input_dev, ABS_X, last_x); + input_report_abs(input_dev, ABS_Y, last_y); + input_sync(input_dev); + } else if (ts->pendown) { + ts->pendown = false; + ts->debounce = DEBOUNCE_COUNT; + input_report_key(input_dev, BTN_TOUCH, 0); + input_sync(input_dev); + } +} + +static int ts4800_parse_dt(struct platform_device *pdev, + struct ts4800_ts *ts) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct device_node *syscon_np; + u32 reg, bit; + int error; + + syscon_np = of_parse_phandle(np, "syscon", 0); + if (!syscon_np) { + dev_err(dev, "no syscon property\n"); + return -ENODEV; + } + + error = of_property_read_u32_index(np, "syscon", 1, ®); + if (error < 0) { + dev_err(dev, "no offset in syscon\n"); + return error; + } + + ts->reg = reg; + + error = of_property_read_u32_index(np, "syscon", 2, &bit); + if (error < 0) { + dev_err(dev, "no bit in syscon\n"); + return error; + } + + ts->bit = BIT(bit); + + ts->regmap = syscon_node_to_regmap(syscon_np); + if (IS_ERR(ts->regmap)) { + dev_err(dev, "cannot get parent's regmap\n"); + return PTR_ERR(ts->regmap); + } + + return 0; +} + +static int ts4800_ts_probe(struct platform_device *pdev) +{ + struct input_polled_dev *poll_dev; + struct ts4800_ts *ts; + struct resource *res; + int error; + + ts = devm_kzalloc(&pdev->dev, sizeof(*ts), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + error = ts4800_parse_dt(pdev, ts); + if (error) + return error; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ts->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(ts->base)) + return PTR_ERR(ts->base); + + poll_dev = devm_input_allocate_polled_device(&pdev->dev); + if (!poll_dev) + return -ENOMEM; + + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&pdev->dev)); + ts->poll_dev = poll_dev; + ts->dev = &pdev->dev; + + poll_dev->private = ts; + poll_dev->poll_interval = POLL_INTERVAL; + poll_dev->open = ts4800_ts_open; + poll_dev->close = ts4800_ts_close; + poll_dev->poll = ts4800_ts_poll; + + poll_dev->input->name = "TS-4800 Touchscreen"; + poll_dev->input->phys = ts->phys; + + input_set_capability(poll_dev->input, EV_KEY, BTN_TOUCH); + input_set_abs_params(poll_dev->input, ABS_X, 0, MAX_12BIT, 0, 0); + input_set_abs_params(poll_dev->input, ABS_Y, 0, MAX_12BIT, 0, 0); + + error = input_register_polled_device(poll_dev); + if (error) { + dev_err(&pdev->dev, + "Unabled to register polled input device (%d)\n", + error); + return error; + } + + return 0; +} + +static const struct of_device_id ts4800_ts_of_match[] = { + { .compatible = "technologic,ts4800-ts", }, + { }, +}; +MODULE_DEVICE_TABLE(of, ts4800_ts_of_match); + +static struct platform_driver ts4800_ts_driver = { + .driver = { + .name = "ts4800-ts", + .of_match_table = ts4800_ts_of_match, + }, + .probe = ts4800_ts_probe, +}; +module_platform_driver(ts4800_ts_driver); + +MODULE_AUTHOR("Damien Riegel <damien.riegel@savoirfairelinux.com>"); +MODULE_DESCRIPTION("TS-4800 Touchscreen Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:ts4800_ts"); diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c index 2792ca397dd0..bab3c6acf6a2 100644 --- a/drivers/input/touchscreen/wacom_w8001.c +++ b/drivers/input/touchscreen/wacom_w8001.c @@ -80,7 +80,8 @@ struct w8001_touch_query { */ struct w8001 { - struct input_dev *dev; + struct input_dev *pen_dev; + struct input_dev *touch_dev; struct serio *serio; struct completion cmd_done; int id; @@ -95,7 +96,10 @@ struct w8001 { u16 max_touch_y; u16 max_pen_x; u16 max_pen_y; - char name[64]; + char pen_name[64]; + char touch_name[64]; + int open_count; + struct mutex mutex; }; static void parse_pen_data(u8 *data, struct w8001_coord *coord) @@ -141,7 +145,7 @@ static void scale_touch_coordinates(struct w8001 *w8001, static void parse_multi_touch(struct w8001 *w8001) { - struct input_dev *dev = w8001->dev; + struct input_dev *dev = w8001->touch_dev; unsigned char *data = w8001->data; unsigned int x, y; int i; @@ -151,7 +155,6 @@ static void parse_multi_touch(struct w8001 *w8001) bool touch = data[0] & (1 << i); input_mt_slot(dev, i); - input_mt_report_slot_state(dev, MT_TOOL_FINGER, touch); if (touch) { x = (data[6 * i + 1] << 7) | data[6 * i + 2]; y = (data[6 * i + 3] << 7) | data[6 * i + 4]; @@ -207,7 +210,7 @@ static void parse_touchquery(u8 *data, struct w8001_touch_query *query) static void report_pen_events(struct w8001 *w8001, struct w8001_coord *coord) { - struct input_dev *dev = w8001->dev; + struct input_dev *dev = w8001->pen_dev; /* * We have 1 bit for proximity (rdy) and 3 bits for tip, side, @@ -233,11 +236,6 @@ static void report_pen_events(struct w8001 *w8001, struct w8001_coord *coord) break; case BTN_TOOL_FINGER: - input_report_key(dev, BTN_TOUCH, 0); - input_report_key(dev, BTN_TOOL_FINGER, 0); - input_sync(dev); - /* fall through */ - case KEY_RESERVED: w8001->type = coord->f2 ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; break; @@ -261,7 +259,7 @@ static void report_pen_events(struct w8001 *w8001, struct w8001_coord *coord) static void report_single_touch(struct w8001 *w8001, struct w8001_coord *coord) { - struct input_dev *dev = w8001->dev; + struct input_dev *dev = w8001->touch_dev; unsigned int x = coord->x; unsigned int y = coord->y; @@ -271,7 +269,6 @@ static void report_single_touch(struct w8001 *w8001, struct w8001_coord *coord) input_report_abs(dev, ABS_X, x); input_report_abs(dev, ABS_Y, y); input_report_key(dev, BTN_TOUCH, coord->tsw); - input_report_key(dev, BTN_TOOL_FINGER, coord->tsw); input_sync(dev); @@ -369,22 +366,36 @@ static int w8001_command(struct w8001 *w8001, unsigned char command, static int w8001_open(struct input_dev *dev) { struct w8001 *w8001 = input_get_drvdata(dev); + int err; - return w8001_command(w8001, W8001_CMD_START, false); + err = mutex_lock_interruptible(&w8001->mutex); + if (err) + return err; + + if (w8001->open_count++ == 0) { + err = w8001_command(w8001, W8001_CMD_START, false); + if (err) + w8001->open_count--; + } + + mutex_unlock(&w8001->mutex); + return err; } static void w8001_close(struct input_dev *dev) { struct w8001 *w8001 = input_get_drvdata(dev); - w8001_command(w8001, W8001_CMD_STOP, false); + mutex_lock(&w8001->mutex); + + if (--w8001->open_count == 0) + w8001_command(w8001, W8001_CMD_STOP, false); + + mutex_unlock(&w8001->mutex); } -static int w8001_setup(struct w8001 *w8001) +static int w8001_detect(struct w8001 *w8001) { - struct input_dev *dev = w8001->dev; - struct w8001_coord coord; - struct w8001_touch_query touch; int error; error = w8001_command(w8001, W8001_CMD_STOP, false); @@ -393,105 +404,145 @@ static int w8001_setup(struct w8001 *w8001) msleep(250); /* wait 250ms before querying the device */ - dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - strlcat(w8001->name, "Wacom Serial", sizeof(w8001->name)); + return 0; +} - __set_bit(INPUT_PROP_DIRECT, dev->propbit); +static int w8001_setup_pen(struct w8001 *w8001, char *basename, + size_t basename_sz) +{ + struct input_dev *dev = w8001->pen_dev; + struct w8001_coord coord; + int error; /* penabled? */ error = w8001_command(w8001, W8001_CMD_QUERY, true); - if (!error) { - __set_bit(BTN_TOUCH, dev->keybit); - __set_bit(BTN_TOOL_PEN, dev->keybit); - __set_bit(BTN_TOOL_RUBBER, dev->keybit); - __set_bit(BTN_STYLUS, dev->keybit); - __set_bit(BTN_STYLUS2, dev->keybit); - - parse_pen_data(w8001->response, &coord); - w8001->max_pen_x = coord.x; - w8001->max_pen_y = coord.y; - - input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0); - input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0); - input_abs_set_res(dev, ABS_X, W8001_PEN_RESOLUTION); - input_abs_set_res(dev, ABS_Y, W8001_PEN_RESOLUTION); - input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0); - if (coord.tilt_x && coord.tilt_y) { - input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0); - input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0); - } - w8001->id = 0x90; - strlcat(w8001->name, " Penabled", sizeof(w8001->name)); + if (error) + return error; + + __set_bit(EV_KEY, dev->evbit); + __set_bit(EV_ABS, dev->evbit); + __set_bit(BTN_TOUCH, dev->keybit); + __set_bit(BTN_TOOL_PEN, dev->keybit); + __set_bit(BTN_TOOL_RUBBER, dev->keybit); + __set_bit(BTN_STYLUS, dev->keybit); + __set_bit(BTN_STYLUS2, dev->keybit); + __set_bit(INPUT_PROP_DIRECT, dev->propbit); + + parse_pen_data(w8001->response, &coord); + w8001->max_pen_x = coord.x; + w8001->max_pen_y = coord.y; + + input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0); + input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0); + input_abs_set_res(dev, ABS_X, W8001_PEN_RESOLUTION); + input_abs_set_res(dev, ABS_Y, W8001_PEN_RESOLUTION); + input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0); + if (coord.tilt_x && coord.tilt_y) { + input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0); + input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0); } + w8001->id = 0x90; + strlcat(basename, " Penabled", basename_sz); + + return 0; +} + +static int w8001_setup_touch(struct w8001 *w8001, char *basename, + size_t basename_sz) +{ + struct input_dev *dev = w8001->touch_dev; + struct w8001_touch_query touch; + int error; + + /* Touch enabled? */ error = w8001_command(w8001, W8001_CMD_TOUCHQUERY, true); - + if (error) + return error; /* * Some non-touch devices may reply to the touch query. But their * second byte is empty, which indicates touch is not supported. */ - if (!error && w8001->response[1]) { - __set_bit(BTN_TOUCH, dev->keybit); - __set_bit(BTN_TOOL_FINGER, dev->keybit); - - parse_touchquery(w8001->response, &touch); - w8001->max_touch_x = touch.x; - w8001->max_touch_y = touch.y; - - if (w8001->max_pen_x && w8001->max_pen_y) { - /* if pen is supported scale to pen maximum */ - touch.x = w8001->max_pen_x; - touch.y = w8001->max_pen_y; - touch.panel_res = W8001_PEN_RESOLUTION; - } + if (!w8001->response[1]) + return -ENXIO; - input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0); - input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0); - input_abs_set_res(dev, ABS_X, touch.panel_res); - input_abs_set_res(dev, ABS_Y, touch.panel_res); - - switch (touch.sensor_id) { - case 0: - case 2: - w8001->pktlen = W8001_PKTLEN_TOUCH93; - w8001->id = 0x93; - strlcat(w8001->name, " 1FG", sizeof(w8001->name)); - break; + __set_bit(EV_KEY, dev->evbit); + __set_bit(EV_ABS, dev->evbit); + __set_bit(BTN_TOUCH, dev->keybit); + __set_bit(INPUT_PROP_DIRECT, dev->propbit); - case 1: - case 3: - case 4: - w8001->pktlen = W8001_PKTLEN_TOUCH9A; - strlcat(w8001->name, " 1FG", sizeof(w8001->name)); - w8001->id = 0x9a; - break; + parse_touchquery(w8001->response, &touch); + w8001->max_touch_x = touch.x; + w8001->max_touch_y = touch.y; - case 5: - w8001->pktlen = W8001_PKTLEN_TOUCH2FG; - - input_mt_init_slots(dev, 2, 0); - input_set_abs_params(dev, ABS_MT_POSITION_X, - 0, touch.x, 0, 0); - input_set_abs_params(dev, ABS_MT_POSITION_Y, - 0, touch.y, 0, 0); - input_set_abs_params(dev, ABS_MT_TOOL_TYPE, - 0, MT_TOOL_MAX, 0, 0); - - strlcat(w8001->name, " 2FG", sizeof(w8001->name)); - if (w8001->max_pen_x && w8001->max_pen_y) - w8001->id = 0xE3; - else - w8001->id = 0xE2; - break; - } + if (w8001->max_pen_x && w8001->max_pen_y) { + /* if pen is supported scale to pen maximum */ + touch.x = w8001->max_pen_x; + touch.y = w8001->max_pen_y; + touch.panel_res = W8001_PEN_RESOLUTION; + } + + input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0); + input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0); + input_abs_set_res(dev, ABS_X, touch.panel_res); + input_abs_set_res(dev, ABS_Y, touch.panel_res); + + switch (touch.sensor_id) { + case 0: + case 2: + w8001->pktlen = W8001_PKTLEN_TOUCH93; + w8001->id = 0x93; + strlcat(basename, " 1FG", basename_sz); + break; + + case 1: + case 3: + case 4: + w8001->pktlen = W8001_PKTLEN_TOUCH9A; + strlcat(basename, " 1FG", basename_sz); + w8001->id = 0x9a; + break; + + case 5: + w8001->pktlen = W8001_PKTLEN_TOUCH2FG; + + __set_bit(BTN_TOOL_DOUBLETAP, dev->keybit); + input_mt_init_slots(dev, 2, 0); + input_set_abs_params(dev, ABS_MT_POSITION_X, + 0, touch.x, 0, 0); + input_set_abs_params(dev, ABS_MT_POSITION_Y, + 0, touch.y, 0, 0); + + strlcat(basename, " 2FG", basename_sz); + if (w8001->max_pen_x && w8001->max_pen_y) + w8001->id = 0xE3; + else + w8001->id = 0xE2; + break; } - strlcat(w8001->name, " Touchscreen", sizeof(w8001->name)); + strlcat(basename, " Touchscreen", basename_sz); return 0; } +static void w8001_set_devdata(struct input_dev *dev, struct w8001 *w8001, + struct serio *serio) +{ + dev->phys = w8001->phys; + dev->id.bustype = BUS_RS232; + dev->id.product = w8001->id; + dev->id.vendor = 0x056a; + dev->id.version = 0x0100; + dev->open = w8001_open; + dev->close = w8001_close; + + dev->dev.parent = &serio->dev; + + input_set_drvdata(dev, w8001); +} + /* * w8001_disconnect() is the opposite of w8001_connect() */ @@ -502,7 +553,10 @@ static void w8001_disconnect(struct serio *serio) serio_close(serio); - input_unregister_device(w8001->dev); + if (w8001->pen_dev) + input_unregister_device(w8001->pen_dev); + if (w8001->touch_dev) + input_unregister_device(w8001->touch_dev); kfree(w8001); serio_set_drvdata(serio, NULL); @@ -517,18 +571,23 @@ static void w8001_disconnect(struct serio *serio) static int w8001_connect(struct serio *serio, struct serio_driver *drv) { struct w8001 *w8001; - struct input_dev *input_dev; - int err; + struct input_dev *input_dev_pen; + struct input_dev *input_dev_touch; + char basename[64]; + int err, err_pen, err_touch; w8001 = kzalloc(sizeof(struct w8001), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!w8001 || !input_dev) { + input_dev_pen = input_allocate_device(); + input_dev_touch = input_allocate_device(); + if (!w8001 || !input_dev_pen || !input_dev_touch) { err = -ENOMEM; goto fail1; } w8001->serio = serio; - w8001->dev = input_dev; + w8001->pen_dev = input_dev_pen; + w8001->touch_dev = input_dev_touch; + mutex_init(&w8001->mutex); init_completion(&w8001->cmd_done); snprintf(w8001->phys, sizeof(w8001->phys), "%s/input0", serio->phys); @@ -537,35 +596,67 @@ static int w8001_connect(struct serio *serio, struct serio_driver *drv) if (err) goto fail2; - err = w8001_setup(w8001); + err = w8001_detect(w8001); if (err) goto fail3; - input_dev->name = w8001->name; - input_dev->phys = w8001->phys; - input_dev->id.product = w8001->id; - input_dev->id.bustype = BUS_RS232; - input_dev->id.vendor = 0x056a; - input_dev->id.version = 0x0100; - input_dev->dev.parent = &serio->dev; + /* For backwards-compatibility we compose the basename based on + * capabilities and then just append the tool type + */ + strlcpy(basename, "Wacom Serial", sizeof(basename)); + + err_pen = w8001_setup_pen(w8001, basename, sizeof(basename)); + err_touch = w8001_setup_touch(w8001, basename, sizeof(basename)); + if (err_pen && err_touch) { + err = -ENXIO; + goto fail3; + } + + if (!err_pen) { + strlcpy(w8001->pen_name, basename, sizeof(w8001->pen_name)); + strlcat(w8001->pen_name, " Pen", sizeof(w8001->pen_name)); + input_dev_pen->name = w8001->pen_name; - input_dev->open = w8001_open; - input_dev->close = w8001_close; + w8001_set_devdata(input_dev_pen, w8001, serio); - input_set_drvdata(input_dev, w8001); + err = input_register_device(w8001->pen_dev); + if (err) + goto fail3; + } else { + input_free_device(input_dev_pen); + input_dev_pen = NULL; + w8001->pen_dev = NULL; + } - err = input_register_device(w8001->dev); - if (err) - goto fail3; + if (!err_touch) { + strlcpy(w8001->touch_name, basename, sizeof(w8001->touch_name)); + strlcat(w8001->touch_name, " Finger", + sizeof(w8001->touch_name)); + input_dev_touch->name = w8001->touch_name; + + w8001_set_devdata(input_dev_touch, w8001, serio); + + err = input_register_device(w8001->touch_dev); + if (err) + goto fail4; + } else { + input_free_device(input_dev_touch); + input_dev_touch = NULL; + w8001->touch_dev = NULL; + } return 0; +fail4: + if (w8001->pen_dev) + input_unregister_device(w8001->pen_dev); fail3: serio_close(serio); fail2: serio_set_drvdata(serio, NULL); fail1: - input_free_device(input_dev); + input_free_device(input_dev_pen); + input_free_device(input_dev_touch); kfree(w8001); return err; } |