diff options
Diffstat (limited to 'drivers/input')
-rw-r--r-- | drivers/input/joydev.c | 61 | ||||
-rw-r--r-- | drivers/input/mouse/Kconfig | 2 | ||||
-rw-r--r-- | drivers/input/mouse/alps.c | 23 | ||||
-rw-r--r-- | drivers/input/mouse/elantech.c | 32 | ||||
-rw-r--r-- | drivers/input/mouse/elantech.h | 1 | ||||
-rw-r--r-- | drivers/input/mouse/synaptics.c | 7 | ||||
-rw-r--r-- | drivers/input/touchscreen/pixcir_i2c_ts.c | 2 | ||||
-rw-r--r-- | drivers/input/touchscreen/sx8654.c | 2 |
8 files changed, 117 insertions, 13 deletions
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index f362883c94e3..1d247bcf2ae2 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -747,6 +747,63 @@ static void joydev_cleanup(struct joydev *joydev) input_close_device(handle); } +static bool joydev_dev_is_absolute_mouse(struct input_dev *dev) +{ + DECLARE_BITMAP(jd_scratch, KEY_CNT); + + BUILD_BUG_ON(ABS_CNT > KEY_CNT || EV_CNT > KEY_CNT); + + /* + * Virtualization (VMware, etc) and remote management (HP + * ILO2) solutions use absolute coordinates for their virtual + * pointing devices so that there is one-to-one relationship + * between pointer position on the host screen and virtual + * guest screen, and so their mice use ABS_X, ABS_Y and 3 + * primary button events. This clashes with what joydev + * considers to be joysticks (a device with at minimum ABS_X + * axis). + * + * Here we are trying to separate absolute mice from + * joysticks. A device is, for joystick detection purposes, + * considered to be an absolute mouse if the following is + * true: + * + * 1) Event types are exactly EV_ABS, EV_KEY and EV_SYN. + * 2) Absolute events are exactly ABS_X and ABS_Y. + * 3) Keys are exactly BTN_LEFT, BTN_RIGHT and BTN_MIDDLE. + * 4) Device is not on "Amiga" bus. + */ + + bitmap_zero(jd_scratch, EV_CNT); + __set_bit(EV_ABS, jd_scratch); + __set_bit(EV_KEY, jd_scratch); + __set_bit(EV_SYN, jd_scratch); + if (!bitmap_equal(jd_scratch, dev->evbit, EV_CNT)) + return false; + + bitmap_zero(jd_scratch, ABS_CNT); + __set_bit(ABS_X, jd_scratch); + __set_bit(ABS_Y, jd_scratch); + if (!bitmap_equal(dev->absbit, jd_scratch, ABS_CNT)) + return false; + + bitmap_zero(jd_scratch, KEY_CNT); + __set_bit(BTN_LEFT, jd_scratch); + __set_bit(BTN_RIGHT, jd_scratch); + __set_bit(BTN_MIDDLE, jd_scratch); + + if (!bitmap_equal(dev->keybit, jd_scratch, KEY_CNT)) + return false; + + /* + * Amiga joystick (amijoy) historically uses left/middle/right + * button events. + */ + if (dev->id.bustype == BUS_AMIGA) + return false; + + return true; +} static bool joydev_match(struct input_handler *handler, struct input_dev *dev) { @@ -758,6 +815,10 @@ static bool joydev_match(struct input_handler *handler, struct input_dev *dev) if (test_bit(EV_KEY, dev->evbit) && test_bit(BTN_DIGI, dev->keybit)) return false; + /* Avoid absolute mice */ + if (joydev_dev_is_absolute_mouse(dev)) + return false; + return true; } diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 7462d2fc8cfe..d7820d1152d2 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -156,7 +156,7 @@ config MOUSE_PS2_VMMOUSE Say Y here if you are running under control of VMware hypervisor (ESXi, Workstation or Fusion). Also make sure that when you enable this option, you remove the xf86-input-vmmouse user-space driver - or upgrade it to at least xf86-input-vmmouse 13.0.1, which doesn't + or upgrade it to at least xf86-input-vmmouse 13.1.0, which doesn't load in the presence of an in-kernel vmmouse driver. If unsure, say N. diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 4e1af89c7749..113d6f1516a5 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -251,6 +251,14 @@ static void alps_process_packet_v1_v2(struct psmouse *psmouse) return; } + /* Non interleaved V2 dualpoint has separate stick button bits */ + if (priv->proto_version == ALPS_PROTO_V2 && + priv->flags == (ALPS_PASS | ALPS_DUALPOINT)) { + left |= packet[0] & 1; + right |= packet[0] & 2; + middle |= packet[0] & 4; + } + alps_report_buttons(dev, dev2, left, right, middle); /* Convert hardware tap to a reasonable Z value */ @@ -941,6 +949,11 @@ static void alps_get_finger_coordinate_v7(struct input_mt_pos *mt, case V7_PACKET_ID_TWO: mt[1].x &= ~0x000F; mt[1].y |= 0x000F; + /* Detect false-postive touches where x & y report max value */ + if (mt[1].y == 0x7ff && mt[1].x == 0xff0) { + mt[1].x = 0; + /* y gets set to 0 at the end of this function */ + } break; case V7_PACKET_ID_MULTI: @@ -1058,9 +1071,8 @@ static void alps_process_trackstick_packet_v7(struct psmouse *psmouse) right = (packet[1] & 0x02) >> 1; middle = (packet[1] & 0x04) >> 2; - /* Divide 2 since trackpoint's speed is too fast */ - input_report_rel(dev2, REL_X, (char)x / 2); - input_report_rel(dev2, REL_Y, -((char)y / 2)); + input_report_rel(dev2, REL_X, (char)x); + input_report_rel(dev2, REL_Y, -((char)y)); input_report_key(dev2, BTN_LEFT, left); input_report_key(dev2, BTN_RIGHT, right); @@ -1345,13 +1357,14 @@ static void alps_report_bare_ps2_packet(struct psmouse *psmouse, bool report_buttons) { struct alps_data *priv = psmouse->private; - struct input_dev *dev; + struct input_dev *dev, *dev2 = NULL; /* Figure out which device to use to report the bare packet */ if (priv->proto_version == ALPS_PROTO_V2 && (priv->flags & ALPS_DUALPOINT)) { /* On V2 devices the DualPoint Stick reports bare packets */ dev = priv->dev2; + dev2 = psmouse->dev; } else if (unlikely(IS_ERR_OR_NULL(priv->dev3))) { /* Register dev3 mouse if we received PS/2 packet first time */ if (!IS_ERR(priv->dev3)) @@ -1363,7 +1376,7 @@ static void alps_report_bare_ps2_packet(struct psmouse *psmouse, } if (report_buttons) - alps_report_buttons(dev, NULL, + alps_report_buttons(dev, dev2, packet[0] & 1, packet[0] & 2, packet[0] & 4); input_report_rel(dev, REL_X, diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 6e22682c8255..ce3d40004458 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -315,7 +315,7 @@ static void elantech_report_semi_mt_data(struct input_dev *dev, unsigned int x2, unsigned int y2) { elantech_set_slot(dev, 0, num_fingers != 0, x1, y1); - elantech_set_slot(dev, 1, num_fingers == 2, x2, y2); + elantech_set_slot(dev, 1, num_fingers >= 2, x2, y2); } /* @@ -893,6 +893,21 @@ static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse) } /* + * This writes the reg_07 value again to the hardware at the end of every + * set_rate call because the register loses its value. reg_07 allows setting + * absolute mode on v4 hardware + */ +static void elantech_set_rate_restore_reg_07(struct psmouse *psmouse, + unsigned int rate) +{ + struct elantech_data *etd = psmouse->private; + + etd->original_set_rate(psmouse, rate); + if (elantech_write_reg(psmouse, 0x07, etd->reg_07)) + psmouse_err(psmouse, "restoring reg_07 failed\n"); +} + +/* * Put the touchpad into absolute mode */ static int elantech_set_absolute_mode(struct psmouse *psmouse) @@ -1094,6 +1109,8 @@ static int elantech_get_resolution_v4(struct psmouse *psmouse, * Asus K53SV 0x450f01 78, 15, 0c 2 hw buttons * Asus G46VW 0x460f02 00, 18, 0c 2 hw buttons * Asus G750JX 0x360f00 00, 16, 0c 2 hw buttons + * Asus TP500LN 0x381f17 10, 14, 0e clickpad + * Asus X750JN 0x381f17 10, 14, 0e clickpad * Asus UX31 0x361f00 20, 15, 0e clickpad * Asus UX32VD 0x361f02 00, 15, 0e clickpad * Avatar AVIU-145A2 0x361f00 ? clickpad @@ -1359,10 +1376,11 @@ static bool elantech_is_signature_valid(const unsigned char *param) return true; /* - * Some models have a revision higher then 20. Meaning param[2] may - * be 10 or 20, skip the rates check for these. + * Some hw_version >= 4 models have a revision higher then 20. Meaning + * that param[2] may be 10 or 20, skip the rates check for these. */ - if (param[0] == 0x46 && (param[1] & 0xef) == 0x0f && param[2] < 40) + if ((param[0] & 0x0f) >= 0x06 && (param[1] & 0xaf) == 0x0f && + param[2] < 40) return true; for (i = 0; i < ARRAY_SIZE(rates); i++) @@ -1538,6 +1556,7 @@ static int elantech_set_properties(struct elantech_data *etd) case 9: case 10: case 13: + case 14: etd->hw_version = 4; break; default: @@ -1635,6 +1654,11 @@ int elantech_init(struct psmouse *psmouse) goto init_fail; } + if (etd->fw_version == 0x381f17) { + etd->original_set_rate = psmouse->set_rate; + psmouse->set_rate = elantech_set_rate_restore_reg_07; + } + if (elantech_set_input_params(psmouse)) { psmouse_err(psmouse, "failed to query touchpad range.\n"); goto init_fail; diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h index 6f3afec02f03..f965d1569cc3 100644 --- a/drivers/input/mouse/elantech.h +++ b/drivers/input/mouse/elantech.h @@ -142,6 +142,7 @@ struct elantech_data { struct finger_pos mt[ETP_MAX_FINGERS]; unsigned char parity[256]; int (*send_cmd)(struct psmouse *psmouse, unsigned char c, unsigned char *param); + void (*original_set_rate)(struct psmouse *psmouse, unsigned int rate); }; #ifdef CONFIG_MOUSE_PS2_ELANTECH diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 630af73e98c4..35c8d0ceabee 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -151,6 +151,11 @@ static const struct min_max_quirk min_max_pnpid_table[] = { 1024, 5112, 2024, 4832 }, { + (const char * const []){"LEN2000", NULL}, + {ANY_BOARD_ID, ANY_BOARD_ID}, + 1024, 5113, 2021, 4832 + }, + { (const char * const []){"LEN2001", NULL}, {ANY_BOARD_ID, ANY_BOARD_ID}, 1024, 5022, 2508, 4832 @@ -191,7 +196,7 @@ static const char * const topbuttonpad_pnp_ids[] = { "LEN0045", "LEN0047", "LEN0049", - "LEN2000", + "LEN2000", /* S540 */ "LEN2001", /* Edge E431 */ "LEN2002", /* Edge E531 */ "LEN2003", diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c index 2c2107147319..8f3e243a62bf 100644 --- a/drivers/input/touchscreen/pixcir_i2c_ts.c +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c @@ -78,7 +78,7 @@ static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata, } ret = i2c_master_recv(tsdata->client, rdbuf, readsize); - if (ret != sizeof(rdbuf)) { + if (ret != readsize) { dev_err(&tsdata->client->dev, "%s: i2c_master_recv failed(), ret=%d\n", __func__, ret); diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c index aecb9ad2e701..642f4a53de50 100644 --- a/drivers/input/touchscreen/sx8654.c +++ b/drivers/input/touchscreen/sx8654.c @@ -187,7 +187,7 @@ static int sx8654_probe(struct i2c_client *client, return -ENOMEM; input = devm_input_allocate_device(&client->dev); - if (!sx8654) + if (!input) return -ENOMEM; input->name = "SX8654 I2C Touchscreen"; |