diff options
Diffstat (limited to 'drivers/input/touchscreen/ads7846.c')
-rw-r--r-- | drivers/input/touchscreen/ads7846.c | 200 |
1 files changed, 76 insertions, 124 deletions
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index f113a27aeb1e..a25a77dd9a32 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -101,10 +101,6 @@ struct ads7846 { struct spi_device *spi; struct regulator *reg; -#if IS_ENABLED(CONFIG_HWMON) - struct device *hwmon; -#endif - u16 model; u16 vref_mv; u16 vref_delay_usecs; @@ -142,13 +138,18 @@ struct ads7846 { int (*filter)(void *data, int data_idx, int *val); void *filter_data; - void (*filter_cleanup)(void *data); int (*get_pendown_state)(void); int gpio_pendown; void (*wait_for_sync)(void); }; +enum ads7846_filter { + ADS7846_FILTER_OK, + ADS7846_FILTER_REPEAT, + ADS7846_FILTER_IGNORE, +}; + /* leave chip selected when we're done, for quicker re-select? */ #if 0 #define CS_CHANGE(xfer) ((xfer).cs_change = 1) @@ -549,6 +550,8 @@ __ATTRIBUTE_GROUPS(ads7846_attr); static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts) { + struct device *hwmon; + /* hwmon sensors need a reference voltage */ switch (ts->model) { case 7846: @@ -569,17 +572,11 @@ static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts) break; } - ts->hwmon = hwmon_device_register_with_groups(&spi->dev, spi->modalias, - ts, ads7846_attr_groups); + hwmon = devm_hwmon_device_register_with_groups(&spi->dev, + spi->modalias, ts, + ads7846_attr_groups); - return PTR_ERR_OR_ZERO(ts->hwmon); -} - -static void ads784x_hwmon_unregister(struct spi_device *spi, - struct ads7846 *ts) -{ - if (ts->hwmon) - hwmon_device_unregister(ts->hwmon); + return PTR_ERR_OR_ZERO(hwmon); } #else @@ -588,11 +585,6 @@ static inline int ads784x_hwmon_register(struct spi_device *spi, { return 0; } - -static inline void ads784x_hwmon_unregister(struct spi_device *spi, - struct ads7846 *ts) -{ -} #endif static ssize_t ads7846_pen_down_show(struct device *dev, @@ -1014,8 +1006,8 @@ static int ads7846_setup_pendown(struct spi_device *spi, ts->get_pendown_state = pdata->get_pendown_state; } else if (gpio_is_valid(pdata->gpio_pendown)) { - err = gpio_request_one(pdata->gpio_pendown, GPIOF_IN, - "ads7846_pendown"); + err = devm_gpio_request_one(&spi->dev, pdata->gpio_pendown, + GPIOF_IN, "ads7846_pendown"); if (err) { dev_err(&spi->dev, "failed to request/setup pendown GPIO%d: %d\n", @@ -1212,24 +1204,30 @@ static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev) } #endif +static void ads7846_regulator_disable(void *regulator) +{ + regulator_disable(regulator); +} + static int ads7846_probe(struct spi_device *spi) { const struct ads7846_platform_data *pdata; struct ads7846 *ts; + struct device *dev = &spi->dev; struct ads7846_packet *packet; struct input_dev *input_dev; unsigned long irq_flags; int err; if (!spi->irq) { - dev_dbg(&spi->dev, "no IRQ?\n"); + dev_dbg(dev, "no IRQ?\n"); return -EINVAL; } /* don't exceed max specified sample rate */ if (spi->max_speed_hz > (125000 * SAMPLE_BITS)) { - dev_err(&spi->dev, "f(sample) %d KHz?\n", - (spi->max_speed_hz/SAMPLE_BITS)/1000); + dev_err(dev, "f(sample) %d KHz?\n", + (spi->max_speed_hz/SAMPLE_BITS)/1000); return -EINVAL; } @@ -1245,13 +1243,17 @@ static int ads7846_probe(struct spi_device *spi) if (err < 0) return err; - ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL); - packet = kzalloc(sizeof(struct ads7846_packet), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!ts || !packet || !input_dev) { - err = -ENOMEM; - goto err_free_mem; - } + ts = devm_kzalloc(dev, sizeof(struct ads7846), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + packet = devm_kzalloc(dev, sizeof(struct ads7846_packet), GFP_KERNEL); + if (!packet) + return -ENOMEM; + + input_dev = devm_input_allocate_device(dev); + if (!input_dev) + return -ENOMEM; spi_set_drvdata(spi, ts); @@ -1262,13 +1264,11 @@ static int ads7846_probe(struct spi_device *spi) mutex_init(&ts->lock); init_waitqueue_head(&ts->wait); - pdata = dev_get_platdata(&spi->dev); + pdata = dev_get_platdata(dev); if (!pdata) { - pdata = ads7846_probe_dt(&spi->dev); - if (IS_ERR(pdata)) { - err = PTR_ERR(pdata); - goto err_free_mem; - } + pdata = ads7846_probe_dt(dev); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); } ts->model = pdata->model ? : 7846; @@ -1276,15 +1276,7 @@ static int ads7846_probe(struct spi_device *spi) ts->x_plate_ohms = pdata->x_plate_ohms ? : 400; ts->vref_mv = pdata->vref_mv; - if (pdata->filter != NULL) { - if (pdata->filter_init != NULL) { - err = pdata->filter_init(pdata, &ts->filter_data); - if (err < 0) - goto err_free_mem; - } - ts->filter = pdata->filter; - ts->filter_cleanup = pdata->filter_cleanup; - } else if (pdata->debounce_max) { + if (pdata->debounce_max) { ts->debounce_max = pdata->debounce_max; if (ts->debounce_max < 2) ts->debounce_max = 2; @@ -1298,7 +1290,7 @@ static int ads7846_probe(struct spi_device *spi) err = ads7846_setup_pendown(spi, ts, pdata); if (err) - goto err_cleanup_filter; + return err; if (pdata->penirq_recheck_delay_usecs) ts->penirq_recheck_delay_usecs = @@ -1306,15 +1298,16 @@ static int ads7846_probe(struct spi_device *spi) ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync; - snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev)); + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev)); snprintf(ts->name, sizeof(ts->name), "ADS%d Touchscreen", ts->model); input_dev->name = ts->name; input_dev->phys = ts->phys; - input_dev->dev.parent = &spi->dev; - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_dev->id.bustype = BUS_SPI; + input_dev->id.product = pdata->model; + + input_set_capability(input_dev, EV_KEY, BTN_TOUCH); input_set_abs_params(input_dev, ABS_X, pdata->x_min ? : 0, pdata->x_max ? : MAX_12BIT, @@ -1345,125 +1338,84 @@ static int ads7846_probe(struct spi_device *spi) ads7846_setup_spi_msg(ts, pdata); - ts->reg = regulator_get(&spi->dev, "vcc"); + ts->reg = devm_regulator_get(dev, "vcc"); if (IS_ERR(ts->reg)) { err = PTR_ERR(ts->reg); - dev_err(&spi->dev, "unable to get regulator: %d\n", err); - goto err_free_gpio; + dev_err(dev, "unable to get regulator: %d\n", err); + return err; } err = regulator_enable(ts->reg); if (err) { - dev_err(&spi->dev, "unable to enable regulator: %d\n", err); - goto err_put_regulator; + dev_err(dev, "unable to enable regulator: %d\n", err); + return err; } + err = devm_add_action_or_reset(dev, ads7846_regulator_disable, ts->reg); + if (err) + return err; + irq_flags = pdata->irq_flags ? : IRQF_TRIGGER_FALLING; irq_flags |= IRQF_ONESHOT; - err = request_threaded_irq(spi->irq, ads7846_hard_irq, ads7846_irq, - irq_flags, spi->dev.driver->name, ts); - if (err && !pdata->irq_flags) { - dev_info(&spi->dev, + err = devm_request_threaded_irq(dev, spi->irq, + ads7846_hard_irq, ads7846_irq, + irq_flags, dev->driver->name, ts); + if (err && err != -EPROBE_DEFER && !pdata->irq_flags) { + dev_info(dev, "trying pin change workaround on irq %d\n", spi->irq); irq_flags |= IRQF_TRIGGER_RISING; - err = request_threaded_irq(spi->irq, - ads7846_hard_irq, ads7846_irq, - irq_flags, spi->dev.driver->name, ts); + err = devm_request_threaded_irq(dev, spi->irq, + ads7846_hard_irq, ads7846_irq, + irq_flags, dev->driver->name, + ts); } if (err) { - dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq); - goto err_disable_regulator; + dev_dbg(dev, "irq %d busy?\n", spi->irq); + return err; } err = ads784x_hwmon_register(spi, ts); if (err) - goto err_free_irq; + return err; - dev_info(&spi->dev, "touchscreen, irq %d\n", spi->irq); + dev_info(dev, "touchscreen, irq %d\n", spi->irq); /* * Take a first sample, leaving nPENIRQ active and vREF off; avoid * the touchscreen, in case it's not connected. */ if (ts->model == 7845) - ads7845_read12_ser(&spi->dev, PWRDOWN); + ads7845_read12_ser(dev, PWRDOWN); else - (void) ads7846_read12_ser(&spi->dev, READ_12BIT_SER(vaux)); + (void) ads7846_read12_ser(dev, READ_12BIT_SER(vaux)); - err = sysfs_create_group(&spi->dev.kobj, &ads784x_attr_group); + err = devm_device_add_group(dev, &ads784x_attr_group); if (err) - goto err_remove_hwmon; + return err; err = input_register_device(input_dev); if (err) - goto err_remove_attr_group; + return err; - device_init_wakeup(&spi->dev, pdata->wakeup); + device_init_wakeup(dev, pdata->wakeup); /* * If device does not carry platform data we must have allocated it * when parsing DT data. */ - if (!dev_get_platdata(&spi->dev)) - devm_kfree(&spi->dev, (void *)pdata); + if (!dev_get_platdata(dev)) + devm_kfree(dev, (void *)pdata); return 0; - - err_remove_attr_group: - sysfs_remove_group(&spi->dev.kobj, &ads784x_attr_group); - err_remove_hwmon: - ads784x_hwmon_unregister(spi, ts); - err_free_irq: - free_irq(spi->irq, ts); - err_disable_regulator: - regulator_disable(ts->reg); - err_put_regulator: - regulator_put(ts->reg); - err_free_gpio: - if (!ts->get_pendown_state) - gpio_free(ts->gpio_pendown); - err_cleanup_filter: - if (ts->filter_cleanup) - ts->filter_cleanup(ts->filter_data); - err_free_mem: - input_free_device(input_dev); - kfree(packet); - kfree(ts); - return err; } static int ads7846_remove(struct spi_device *spi) { struct ads7846 *ts = spi_get_drvdata(spi); - sysfs_remove_group(&spi->dev.kobj, &ads784x_attr_group); - - ads7846_disable(ts); - free_irq(ts->spi->irq, ts); - - input_unregister_device(ts->input); - - ads784x_hwmon_unregister(spi, ts); - - regulator_put(ts->reg); - - if (!ts->get_pendown_state) { - /* - * If we are not using specialized pendown method we must - * have been relying on gpio we set up ourselves. - */ - gpio_free(ts->gpio_pendown); - } - - if (ts->filter_cleanup) - ts->filter_cleanup(ts->filter_data); - - kfree(ts->packet); - kfree(ts); - - dev_dbg(&spi->dev, "unregistered touchscreen\n"); + ads7846_stop(ts); return 0; } |