diff options
Diffstat (limited to 'drivers/infiniband/hw/hfi1/eprom.c')
| -rw-r--r-- | drivers/infiniband/hw/hfi1/eprom.c | 185 |
1 files changed, 185 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/hfi1/eprom.c b/drivers/infiniband/hw/hfi1/eprom.c index 36b77943cbfd..e70c223801b4 100644 --- a/drivers/infiniband/hw/hfi1/eprom.c +++ b/drivers/infiniband/hw/hfi1/eprom.c @@ -49,7 +49,26 @@ #include "common.h" #include "eprom.h" +/* + * The EPROM is logically divided into three partitions: + * partition 0: the first 128K, visible from PCI ROM BAR + * partition 1: 4K config file (sector size) + * partition 2: the rest + */ +#define P0_SIZE (128 * 1024) +#define P1_SIZE (4 * 1024) +#define P1_START P0_SIZE +#define P2_START (P0_SIZE + P1_SIZE) + +/* controller page size, in bytes */ +#define EP_PAGE_SIZE 256 +#define EP_PAGE_MASK (EP_PAGE_SIZE - 1) +#define EP_PAGE_DWORDS (EP_PAGE_SIZE / sizeof(u32)) + +/* controller commands */ #define CMD_SHIFT 24 +#define CMD_NOP (0) +#define CMD_READ_DATA(addr) ((0x03 << CMD_SHIFT) | addr) #define CMD_RELEASE_POWERDOWN_NOID ((0xab << CMD_SHIFT)) /* controller interface speeds */ @@ -61,6 +80,90 @@ * Double it for safety. */ #define EPROM_TIMEOUT 80000 /* ms */ + +/* + * Read a 256 byte (64 dword) EPROM page. + * All callers have verified the offset is at a page boundary. + */ +static void read_page(struct hfi1_devdata *dd, u32 offset, u32 *result) +{ + int i; + + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_READ_DATA(offset)); + for (i = 0; i < EP_PAGE_DWORDS; i++) + result[i] = (u32)read_csr(dd, ASIC_EEP_DATA); + write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_NOP); /* close open page */ +} + +/* + * Read length bytes starting at offset from the start of the EPROM. + */ +static int read_length(struct hfi1_devdata *dd, u32 start, u32 len, void *dest) +{ + u32 buffer[EP_PAGE_DWORDS]; + u32 end; + u32 start_offset; + u32 read_start; + u32 bytes; + + if (len == 0) + return 0; + + end = start + len; + + /* + * Make sure the read range is not outside of the controller read + * command address range. Note that '>' is correct below - the end + * of the range is OK if it stops at the limit, but no higher. + */ + if (end > (1 << CMD_SHIFT)) + return -EINVAL; + + /* read the first partial page */ + start_offset = start & EP_PAGE_MASK; + if (start_offset) { + /* partial starting page */ + + /* align and read the page that contains the start */ + read_start = start & ~EP_PAGE_MASK; + read_page(dd, read_start, buffer); + + /* the rest of the page is available data */ + bytes = EP_PAGE_SIZE - start_offset; + + if (len <= bytes) { + /* end is within this page */ + memcpy(dest, (u8 *)buffer + start_offset, len); + return 0; + } + + memcpy(dest, (u8 *)buffer + start_offset, bytes); + + start += bytes; + len -= bytes; + dest += bytes; + } + /* start is now page aligned */ + + /* read whole pages */ + while (len >= EP_PAGE_SIZE) { + read_page(dd, start, buffer); + memcpy(dest, buffer, EP_PAGE_SIZE); + + start += EP_PAGE_SIZE; + len -= EP_PAGE_SIZE; + dest += EP_PAGE_SIZE; + } + + /* read the last partial page */ + if (len) { + read_page(dd, start, buffer); + memcpy(dest, buffer, len); + } + + return 0; +} + /* * Initialize the EPROM handler. */ @@ -100,3 +203,85 @@ int eprom_init(struct hfi1_devdata *dd) done_asic: return ret; } + +/* magic character sequence that trails an image */ +#define IMAGE_TRAIL_MAGIC "egamiAPO" + +/* + * Read all of partition 1. The actual file is at the front. Adjust + * the returned size if a trailing image magic is found. + */ +static int read_partition_platform_config(struct hfi1_devdata *dd, void **data, + u32 *size) +{ + void *buffer; + void *p; + u32 length; + int ret; + + buffer = kmalloc(P1_SIZE, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + ret = read_length(dd, P1_START, P1_SIZE, buffer); + if (ret) { + kfree(buffer); + return ret; + } + + /* scan for image magic that may trail the actual data */ + p = strnstr(buffer, IMAGE_TRAIL_MAGIC, P1_SIZE); + if (p) + length = p - buffer; + else + length = P1_SIZE; + + *data = buffer; + *size = length; + return 0; +} + +/* + * Read the platform configuration file from the EPROM. + * + * On success, an allocated buffer containing the data and its size are + * returned. It is up to the caller to free this buffer. + * + * Return value: + * 0 - success + * -ENXIO - no EPROM is available + * -EBUSY - not able to acquire access to the EPROM + * -ENOENT - no recognizable file written + * -ENOMEM - buffer could not be allocated + */ +int eprom_read_platform_config(struct hfi1_devdata *dd, void **data, u32 *size) +{ + u32 directory[EP_PAGE_DWORDS]; /* aligned buffer */ + int ret; + + if (!dd->eprom_available) + return -ENXIO; + + ret = acquire_chip_resource(dd, CR_EPROM, EPROM_TIMEOUT); + if (ret) + return -EBUSY; + + /* read the last page of P0 for the EPROM format magic */ + ret = read_length(dd, P1_START - EP_PAGE_SIZE, EP_PAGE_SIZE, directory); + if (ret) + goto done; + + /* last dword of P0 contains a magic indicator */ + if (directory[EP_PAGE_DWORDS - 1] == 0) { + /* partition format */ + ret = read_partition_platform_config(dd, data, size); + goto done; + } + + /* nothing recognized */ + ret = -ENOENT; + +done: + release_chip_resource(dd, CR_EPROM); + return ret; +} |