diff options
Diffstat (limited to 'drivers/iio')
91 files changed, 9569 insertions, 749 deletions
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index edc29b173f6c..b0d3ecf3318b 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -143,7 +143,7 @@ config MMA8452 select IIO_TRIGGERED_BUFFER help Say yes here to build support for the following Freescale 3-axis - accelerometers: MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC. + accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC. To compile this driver as a module, choose M here: the module will be called mma8452. @@ -213,6 +213,7 @@ config STK8312 config STK8BA50 tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver" depends on I2C + depends on IIO_TRIGGER help Say yes here to get support for the Sensortek STK8BA50 3-axis accelerometer. diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c index ccc632a7cf01..7f4994f32a90 100644 --- a/drivers/iio/accel/mma8452.c +++ b/drivers/iio/accel/mma8452.c @@ -1,6 +1,7 @@ /* * mma8452.c - Support for following Freescale 3-axis accelerometers: * + * MMA8451Q (14 bit) * MMA8452Q (12 bit) * MMA8453Q (10 bit) * MMA8652FC (12 bit) @@ -15,7 +16,7 @@ * * 7-bit I2C slave address 0x1c/0x1d (pin selectable) * - * TODO: orientation / freefall events, autosleep + * TODO: orientation events, autosleep */ #include <linux/module.h> @@ -85,8 +86,9 @@ #define MMA8452_INT_FF_MT BIT(2) #define MMA8452_INT_TRANS BIT(5) -#define MMA8452_DEVICE_ID 0x2a -#define MMA8453_DEVICE_ID 0x3a +#define MMA8451_DEVICE_ID 0x1a +#define MMA8452_DEVICE_ID 0x2a +#define MMA8453_DEVICE_ID 0x3a #define MMA8652_DEVICE_ID 0x4a #define MMA8653_DEVICE_ID 0x5a @@ -416,6 +418,51 @@ fail: return ret; } +/* returns >0 if in freefall mode, 0 if not or <0 if an error occured */ +static int mma8452_freefall_mode_enabled(struct mma8452_data *data) +{ + int val; + const struct mma_chip_info *chip = data->chip_info; + + val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg); + if (val < 0) + return val; + + return !(val & MMA8452_FF_MT_CFG_OAE); +} + +static int mma8452_set_freefall_mode(struct mma8452_data *data, bool state) +{ + int val; + const struct mma_chip_info *chip = data->chip_info; + + if ((state && mma8452_freefall_mode_enabled(data)) || + (!state && !(mma8452_freefall_mode_enabled(data)))) + return 0; + + val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg); + if (val < 0) + return val; + + if (state) { + val |= BIT(idx_x + chip->ev_cfg_chan_shift); + val |= BIT(idx_y + chip->ev_cfg_chan_shift); + val |= BIT(idx_z + chip->ev_cfg_chan_shift); + val &= ~MMA8452_FF_MT_CFG_OAE; + } else { + val &= ~BIT(idx_x + chip->ev_cfg_chan_shift); + val &= ~BIT(idx_y + chip->ev_cfg_chan_shift); + val &= ~BIT(idx_z + chip->ev_cfg_chan_shift); + val |= MMA8452_FF_MT_CFG_OAE; + } + + val = mma8452_change_config(data, chip->ev_cfg, val); + if (val) + return val; + + return 0; +} + static int mma8452_set_hp_filter_frequency(struct mma8452_data *data, int val, int val2) { @@ -609,12 +656,22 @@ static int mma8452_read_event_config(struct iio_dev *indio_dev, const struct mma_chip_info *chip = data->chip_info; int ret; - ret = i2c_smbus_read_byte_data(data->client, - data->chip_info->ev_cfg); - if (ret < 0) - return ret; + switch (dir) { + case IIO_EV_DIR_FALLING: + return mma8452_freefall_mode_enabled(data); + case IIO_EV_DIR_RISING: + if (mma8452_freefall_mode_enabled(data)) + return 0; + + ret = i2c_smbus_read_byte_data(data->client, + data->chip_info->ev_cfg); + if (ret < 0) + return ret; - return !!(ret & BIT(chan->scan_index + chip->ev_cfg_chan_shift)); + return !!(ret & BIT(chan->scan_index + chip->ev_cfg_chan_shift)); + default: + return -EINVAL; + } } static int mma8452_write_event_config(struct iio_dev *indio_dev, @@ -627,19 +684,35 @@ static int mma8452_write_event_config(struct iio_dev *indio_dev, const struct mma_chip_info *chip = data->chip_info; int val; - val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg); - if (val < 0) - return val; + switch (dir) { + case IIO_EV_DIR_FALLING: + return mma8452_set_freefall_mode(data, state); + case IIO_EV_DIR_RISING: + val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg); + if (val < 0) + return val; + + if (state) { + if (mma8452_freefall_mode_enabled(data)) { + val &= ~BIT(idx_x + chip->ev_cfg_chan_shift); + val &= ~BIT(idx_y + chip->ev_cfg_chan_shift); + val &= ~BIT(idx_z + chip->ev_cfg_chan_shift); + val |= MMA8452_FF_MT_CFG_OAE; + } + val |= BIT(chan->scan_index + chip->ev_cfg_chan_shift); + } else { + if (mma8452_freefall_mode_enabled(data)) + return 0; - if (state) - val |= BIT(chan->scan_index + chip->ev_cfg_chan_shift); - else - val &= ~BIT(chan->scan_index + chip->ev_cfg_chan_shift); + val &= ~BIT(chan->scan_index + chip->ev_cfg_chan_shift); + } - val |= chip->ev_cfg_ele; - val |= MMA8452_FF_MT_CFG_OAE; + val |= chip->ev_cfg_ele; - return mma8452_change_config(data, chip->ev_cfg, val); + return mma8452_change_config(data, chip->ev_cfg, val); + default: + return -EINVAL; + } } static void mma8452_transient_interrupt(struct iio_dev *indio_dev) @@ -652,6 +725,16 @@ static void mma8452_transient_interrupt(struct iio_dev *indio_dev) if (src < 0) return; + if (mma8452_freefall_mode_enabled(data)) { + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, + IIO_MOD_X_AND_Y_AND_Z, + IIO_EV_TYPE_MAG, + IIO_EV_DIR_FALLING), + ts); + return; + } + if (src & data->chip_info->ev_src_xe) iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X, @@ -745,6 +828,27 @@ static int mma8452_reg_access_dbg(struct iio_dev *indio_dev, return 0; } +static const struct iio_event_spec mma8452_freefall_event[] = { + { + .type = IIO_EV_TYPE_MAG, + .dir = IIO_EV_DIR_FALLING, + .mask_separate = BIT(IIO_EV_INFO_ENABLE), + .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_PERIOD) | + BIT(IIO_EV_INFO_HIGH_PASS_FILTER_3DB) + }, +}; + +static const struct iio_event_spec mma8652_freefall_event[] = { + { + .type = IIO_EV_TYPE_MAG, + .dir = IIO_EV_DIR_FALLING, + .mask_separate = BIT(IIO_EV_INFO_ENABLE), + .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_PERIOD) + }, +}; + static const struct iio_event_spec mma8452_transient_event[] = { { .type = IIO_EV_TYPE_MAG, @@ -781,6 +885,24 @@ static struct attribute_group mma8452_event_attribute_group = { .attrs = mma8452_event_attributes, }; +#define MMA8452_FREEFALL_CHANNEL(modifier) { \ + .type = IIO_ACCEL, \ + .modified = 1, \ + .channel2 = modifier, \ + .scan_index = -1, \ + .event_spec = mma8452_freefall_event, \ + .num_event_specs = ARRAY_SIZE(mma8452_freefall_event), \ +} + +#define MMA8652_FREEFALL_CHANNEL(modifier) { \ + .type = IIO_ACCEL, \ + .modified = 1, \ + .channel2 = modifier, \ + .scan_index = -1, \ + .event_spec = mma8652_freefall_event, \ + .num_event_specs = ARRAY_SIZE(mma8652_freefall_event), \ +} + #define MMA8452_CHANNEL(axis, idx, bits) { \ .type = IIO_ACCEL, \ .modified = 1, \ @@ -822,11 +944,20 @@ static struct attribute_group mma8452_event_attribute_group = { .num_event_specs = ARRAY_SIZE(mma8452_motion_event), \ } +static const struct iio_chan_spec mma8451_channels[] = { + MMA8452_CHANNEL(X, idx_x, 14), + MMA8452_CHANNEL(Y, idx_y, 14), + MMA8452_CHANNEL(Z, idx_z, 14), + IIO_CHAN_SOFT_TIMESTAMP(idx_ts), + MMA8452_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z), +}; + static const struct iio_chan_spec mma8452_channels[] = { MMA8452_CHANNEL(X, idx_x, 12), MMA8452_CHANNEL(Y, idx_y, 12), MMA8452_CHANNEL(Z, idx_z, 12), IIO_CHAN_SOFT_TIMESTAMP(idx_ts), + MMA8452_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z), }; static const struct iio_chan_spec mma8453_channels[] = { @@ -834,6 +965,7 @@ static const struct iio_chan_spec mma8453_channels[] = { MMA8452_CHANNEL(Y, idx_y, 10), MMA8452_CHANNEL(Z, idx_z, 10), IIO_CHAN_SOFT_TIMESTAMP(idx_ts), + MMA8452_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z), }; static const struct iio_chan_spec mma8652_channels[] = { @@ -841,6 +973,7 @@ static const struct iio_chan_spec mma8652_channels[] = { MMA8652_CHANNEL(Y, idx_y, 12), MMA8652_CHANNEL(Z, idx_z, 12), IIO_CHAN_SOFT_TIMESTAMP(idx_ts), + MMA8652_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z), }; static const struct iio_chan_spec mma8653_channels[] = { @@ -848,9 +981,11 @@ static const struct iio_chan_spec mma8653_channels[] = { MMA8652_CHANNEL(Y, idx_y, 10), MMA8652_CHANNEL(Z, idx_z, 10), IIO_CHAN_SOFT_TIMESTAMP(idx_ts), + MMA8652_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z), }; enum { + mma8451, mma8452, mma8453, mma8652, @@ -858,17 +993,34 @@ enum { }; static const struct mma_chip_info mma_chip_info_table[] = { - [mma8452] = { - .chip_id = MMA8452_DEVICE_ID, - .channels = mma8452_channels, - .num_channels = ARRAY_SIZE(mma8452_channels), + [mma8451] = { + .chip_id = MMA8451_DEVICE_ID, + .channels = mma8451_channels, + .num_channels = ARRAY_SIZE(mma8451_channels), /* * Hardware has fullscale of -2G, -4G, -8G corresponding to - * raw value -2048 for 12 bit or -512 for 10 bit. + * raw value -8192 for 14 bit, -2048 for 12 bit or -512 for 10 + * bit. * The userspace interface uses m/s^2 and we declare micro units * So scale factor for 12 bit here is given by: - * g * N * 1000000 / 2048 for N = 2, 4, 8 and g=9.80665 + * g * N * 1000000 / 2048 for N = 2, 4, 8 and g=9.80665 */ + .mma_scales = { {0, 2394}, {0, 4788}, {0, 9577} }, + .ev_cfg = MMA8452_TRANSIENT_CFG, + .ev_cfg_ele = MMA8452_TRANSIENT_CFG_ELE, + .ev_cfg_chan_shift = 1, + .ev_src = MMA8452_TRANSIENT_SRC, + .ev_src_xe = MMA8452_TRANSIENT_SRC_XTRANSE, + .ev_src_ye = MMA8452_TRANSIENT_SRC_YTRANSE, + .ev_src_ze = MMA8452_TRANSIENT_SRC_ZTRANSE, + .ev_ths = MMA8452_TRANSIENT_THS, + .ev_ths_mask = MMA8452_TRANSIENT_THS_MASK, + .ev_count = MMA8452_TRANSIENT_COUNT, + }, + [mma8452] = { + .chip_id = MMA8452_DEVICE_ID, + .channels = mma8452_channels, + .num_channels = ARRAY_SIZE(mma8452_channels), .mma_scales = { {0, 9577}, {0, 19154}, {0, 38307} }, .ev_cfg = MMA8452_TRANSIENT_CFG, .ev_cfg_ele = MMA8452_TRANSIENT_CFG_ELE, @@ -1049,6 +1201,7 @@ static int mma8452_reset(struct i2c_client *client) } static const struct of_device_id mma8452_dt_ids[] = { + { .compatible = "fsl,mma8451", .data = &mma_chip_info_table[mma8451] }, { .compatible = "fsl,mma8452", .data = &mma_chip_info_table[mma8452] }, { .compatible = "fsl,mma8453", .data = &mma_chip_info_table[mma8453] }, { .compatible = "fsl,mma8652", .data = &mma_chip_info_table[mma8652] }, @@ -1085,6 +1238,7 @@ static int mma8452_probe(struct i2c_client *client, return ret; switch (ret) { + case MMA8451_DEVICE_ID: case MMA8452_DEVICE_ID: case MMA8453_DEVICE_ID: case MMA8652_DEVICE_ID: @@ -1190,6 +1344,10 @@ static int mma8452_probe(struct i2c_client *client, if (ret < 0) goto buffer_cleanup; + ret = mma8452_set_freefall_mode(data, false); + if (ret) + return ret; + return 0; buffer_cleanup: diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index 70f042797f15..a03a1417dd63 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -67,6 +67,8 @@ #define ST_ACCEL_1_DRDY_IRQ_ADDR 0x22 #define ST_ACCEL_1_DRDY_IRQ_INT1_MASK 0x10 #define ST_ACCEL_1_DRDY_IRQ_INT2_MASK 0x08 +#define ST_ACCEL_1_IHL_IRQ_ADDR 0x25 +#define ST_ACCEL_1_IHL_IRQ_MASK 0x02 #define ST_ACCEL_1_MULTIREAD_BIT true /* CUSTOM VALUES FOR SENSOR 2 */ @@ -92,6 +94,8 @@ #define ST_ACCEL_2_DRDY_IRQ_ADDR 0x22 #define ST_ACCEL_2_DRDY_IRQ_INT1_MASK 0x02 #define ST_ACCEL_2_DRDY_IRQ_INT2_MASK 0x10 +#define ST_ACCEL_2_IHL_IRQ_ADDR 0x22 +#define ST_ACCEL_2_IHL_IRQ_MASK 0x80 #define ST_ACCEL_2_MULTIREAD_BIT true /* CUSTOM VALUES FOR SENSOR 3 */ @@ -125,6 +129,8 @@ #define ST_ACCEL_3_DRDY_IRQ_ADDR 0x23 #define ST_ACCEL_3_DRDY_IRQ_INT1_MASK 0x80 #define ST_ACCEL_3_DRDY_IRQ_INT2_MASK 0x00 +#define ST_ACCEL_3_IHL_IRQ_ADDR 0x23 +#define ST_ACCEL_3_IHL_IRQ_MASK 0x40 #define ST_ACCEL_3_IG1_EN_ADDR 0x23 #define ST_ACCEL_3_IG1_EN_MASK 0x08 #define ST_ACCEL_3_MULTIREAD_BIT false @@ -169,6 +175,8 @@ #define ST_ACCEL_5_DRDY_IRQ_ADDR 0x22 #define ST_ACCEL_5_DRDY_IRQ_INT1_MASK 0x04 #define ST_ACCEL_5_DRDY_IRQ_INT2_MASK 0x20 +#define ST_ACCEL_5_IHL_IRQ_ADDR 0x22 +#define ST_ACCEL_5_IHL_IRQ_MASK 0x80 #define ST_ACCEL_5_IG1_EN_ADDR 0x21 #define ST_ACCEL_5_IG1_EN_MASK 0x08 #define ST_ACCEL_5_MULTIREAD_BIT false @@ -292,6 +300,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .addr = ST_ACCEL_1_DRDY_IRQ_ADDR, .mask_int1 = ST_ACCEL_1_DRDY_IRQ_INT1_MASK, .mask_int2 = ST_ACCEL_1_DRDY_IRQ_INT2_MASK, + .addr_ihl = ST_ACCEL_1_IHL_IRQ_ADDR, + .mask_ihl = ST_ACCEL_1_IHL_IRQ_MASK, }, .multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT, .bootime = 2, @@ -355,6 +365,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .addr = ST_ACCEL_2_DRDY_IRQ_ADDR, .mask_int1 = ST_ACCEL_2_DRDY_IRQ_INT1_MASK, .mask_int2 = ST_ACCEL_2_DRDY_IRQ_INT2_MASK, + .addr_ihl = ST_ACCEL_2_IHL_IRQ_ADDR, + .mask_ihl = ST_ACCEL_2_IHL_IRQ_MASK, }, .multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT, .bootime = 2, @@ -430,6 +442,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .addr = ST_ACCEL_3_DRDY_IRQ_ADDR, .mask_int1 = ST_ACCEL_3_DRDY_IRQ_INT1_MASK, .mask_int2 = ST_ACCEL_3_DRDY_IRQ_INT2_MASK, + .addr_ihl = ST_ACCEL_3_IHL_IRQ_ADDR, + .mask_ihl = ST_ACCEL_3_IHL_IRQ_MASK, .ig1 = { .en_addr = ST_ACCEL_3_IG1_EN_ADDR, .en_mask = ST_ACCEL_3_IG1_EN_MASK, @@ -537,6 +551,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .addr = ST_ACCEL_5_DRDY_IRQ_ADDR, .mask_int1 = ST_ACCEL_5_DRDY_IRQ_INT1_MASK, .mask_int2 = ST_ACCEL_5_DRDY_IRQ_INT2_MASK, + .addr_ihl = ST_ACCEL_5_IHL_IRQ_ADDR, + .mask_ihl = ST_ACCEL_5_IHL_IRQ_MASK, }, .multi_read_bit = ST_ACCEL_5_MULTIREAD_BIT, .bootime = 2, /* guess */ diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index a7ec74bffa5b..af4aea7b20f9 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -131,6 +131,16 @@ config AT91_ADC To compile this driver as a module, choose M here: the module will be called at91_adc. +config AT91_SAMA5D2_ADC + tristate "Atmel AT91 SAMA5D2 ADC" + depends on ARCH_AT91 || COMPILE_TEST + help + Say yes here to build support for Atmel SAMA5D2 ADC which is + available on SAMA5D2 SoC family. + + To compile this driver as a module, choose M here: the module will be + called at91-sama5d2_adc. + config AXP288_ADC tristate "X-Powers AXP288 ADC driver" depends on MFD_AXP20X @@ -175,6 +185,7 @@ config DA9150_GPADC config EXYNOS_ADC tristate "Exynos ADC driver support" depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || (OF && COMPILE_TEST) + depends on HAS_IOMEM help Core support for the ADC block found in the Samsung EXYNOS series of SoCs for drivers such as the touchscreen and hwmon to use to share @@ -214,6 +225,7 @@ config INA2XX_ADC config IMX7D_ADC tristate "IMX7D ADC driver" depends on ARCH_MXC || COMPILE_TEST + depends on HAS_IOMEM help Say yes here to build support for IMX7D ADC. @@ -272,11 +284,11 @@ config MCP320X called mcp320x. config MCP3422 - tristate "Microchip Technology MCP3422/3/4/6/7/8 driver" + tristate "Microchip Technology MCP3421/2/3/4/5/6/7/8 driver" depends on I2C help - Say yes here to build support for Microchip Technology's - MCP3422, MCP3423, MCP3424, MCP3426, MCP3427 or MCP3428 + Say yes here to build support for Microchip Technology's MCP3421 + MCP3422, MCP3423, MCP3424, MCP3425, MCP3426, MCP3427 or MCP3428 analog to digital converters. This driver can also be built as a module. If so, the module will be @@ -292,6 +304,20 @@ config MEN_Z188_ADC This driver can also be built as a module. If so, the module will be called men_z188_adc. +config MXS_LRADC + tristate "Freescale i.MX23/i.MX28 LRADC" + depends on (ARCH_MXS || COMPILE_TEST) && HAS_IOMEM + depends on INPUT + select STMP_DEVICE + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for i.MX23/i.MX28 LRADC convertor + built into these chips. + + To compile this driver as a module, choose M here: the + module will be called mxs-lradc. + config NAU7802 tristate "Nuvoton NAU7802 ADC driver" depends on I2C @@ -357,6 +383,16 @@ config TI_ADC081C This driver can also be built as a module. If so, the module will be called ti-adc081c. +config TI_ADC0832 + tristate "Texas Instruments ADC0831/ADC0832/ADC0834/ADC0838" + depends on SPI + help + If you say yes here you get support for Texas Instruments ADC0831, + ADC0832, ADC0834, ADC0838 ADC chips. + + This driver can also be built as a module. If so, the module will be + called ti-adc0832. + config TI_ADC128S052 tristate "Texas Instruments ADC128S052/ADC122S021/ADC124S021" depends on SPI @@ -367,6 +403,19 @@ config TI_ADC128S052 This driver can also be built as a module. If so, the module will be called ti-adc128s052. +config TI_ADS1015 + tristate "Texas Instruments ADS1015 ADC" + depends on I2C && !SENSORS_ADS1015 + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + If you say yes here you get support for Texas Instruments ADS1015 + ADC chip. + + This driver can also be built as a module. If so, the module will be + called ti-ads1015. + config TI_ADS8688 tristate "Texas Instruments ADS8688" depends on SPI && OF @@ -416,6 +465,7 @@ config TWL6030_GPADC config VF610_ADC tristate "Freescale vf610 ADC driver" depends on OF + depends on HAS_IOMEM select IIO_BUFFER select IIO_TRIGGERED_BUFFER help diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 151088f03258..0cb79210a4b0 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_AD7793) += ad7793.o obj-$(CONFIG_AD7887) += ad7887.o obj-$(CONFIG_AD799X) += ad799x.o obj-$(CONFIG_AT91_ADC) += at91_adc.o +obj-$(CONFIG_AT91_SAMA5D2_ADC) += at91-sama5d2_adc.o obj-$(CONFIG_AXP288_ADC) += axp288_adc.o obj-$(CONFIG_BERLIN2_ADC) += berlin2-adc.o obj-$(CONFIG_CC10001_ADC) += cc10001_adc.o @@ -29,13 +30,16 @@ obj-$(CONFIG_MAX1363) += max1363.o obj-$(CONFIG_MCP320X) += mcp320x.o obj-$(CONFIG_MCP3422) += mcp3422.o obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o +obj-$(CONFIG_MXS_LRADC) += mxs-lradc.o obj-$(CONFIG_NAU7802) += nau7802.o obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o +obj-$(CONFIG_TI_ADC0832) += ti-adc0832.o obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o +obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o obj-$(CONFIG_TI_ADS8688) += ti-ads8688.o obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c new file mode 100644 index 000000000000..dbee13ad33a3 --- /dev/null +++ b/drivers/iio/adc/at91-sama5d2_adc.c @@ -0,0 +1,508 @@ +/* + * Atmel ADC driver for SAMA5D2 devices and compatible. + * + * Copyright (C) 2015 Atmel, + * 2015 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/wait.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/regulator/consumer.h> + +/* Control Register */ +#define AT91_SAMA5D2_CR 0x00 +/* Software Reset */ +#define AT91_SAMA5D2_CR_SWRST BIT(0) +/* Start Conversion */ +#define AT91_SAMA5D2_CR_START BIT(1) +/* Touchscreen Calibration */ +#define AT91_SAMA5D2_CR_TSCALIB BIT(2) +/* Comparison Restart */ +#define AT91_SAMA5D2_CR_CMPRST BIT(4) + +/* Mode Register */ +#define AT91_SAMA5D2_MR 0x04 +/* Trigger Selection */ +#define AT91_SAMA5D2_MR_TRGSEL(v) ((v) << 1) +/* ADTRG */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG0 0 +/* TIOA0 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG1 1 +/* TIOA1 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG2 2 +/* TIOA2 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG3 3 +/* PWM event line 0 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG4 4 +/* PWM event line 1 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG5 5 +/* TIOA3 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG6 6 +/* RTCOUT0 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG7 7 +/* Sleep Mode */ +#define AT91_SAMA5D2_MR_SLEEP BIT(5) +/* Fast Wake Up */ +#define AT91_SAMA5D2_MR_FWUP BIT(6) +/* Prescaler Rate Selection */ +#define AT91_SAMA5D2_MR_PRESCAL(v) ((v) << AT91_SAMA5D2_MR_PRESCAL_OFFSET) +#define AT91_SAMA5D2_MR_PRESCAL_OFFSET 8 +#define AT91_SAMA5D2_MR_PRESCAL_MAX 0xff +/* Startup Time */ +#define AT91_SAMA5D2_MR_STARTUP(v) ((v) << 16) +/* Analog Change */ +#define AT91_SAMA5D2_MR_ANACH BIT(23) +/* Tracking Time */ +#define AT91_SAMA5D2_MR_TRACKTIM(v) ((v) << 24) +#define AT91_SAMA5D2_MR_TRACKTIM_MAX 0xff +/* Transfer Time */ +#define AT91_SAMA5D2_MR_TRANSFER(v) ((v) << 28) +#define AT91_SAMA5D2_MR_TRANSFER_MAX 0x3 +/* Use Sequence Enable */ +#define AT91_SAMA5D2_MR_USEQ BIT(31) + +/* Channel Sequence Register 1 */ +#define AT91_SAMA5D2_SEQR1 0x08 +/* Channel Sequence Register 2 */ +#define AT91_SAMA5D2_SEQR2 0x0c +/* Channel Enable Register */ +#define AT91_SAMA5D2_CHER 0x10 +/* Channel Disable Register */ +#define AT91_SAMA5D2_CHDR 0x14 +/* Channel Status Register */ +#define AT91_SAMA5D2_CHSR 0x18 +/* Last Converted Data Register */ +#define AT91_SAMA5D2_LCDR 0x20 +/* Interrupt Enable Register */ +#define AT91_SAMA5D2_IER 0x24 +/* Interrupt Disable Register */ +#define AT91_SAMA5D2_IDR 0x28 +/* Interrupt Mask Register */ +#define AT91_SAMA5D2_IMR 0x2c +/* Interrupt Status Register */ +#define AT91_SAMA5D2_ISR 0x30 +/* Last Channel Trigger Mode Register */ +#define AT91_SAMA5D2_LCTMR 0x34 +/* Last Channel Compare Window Register */ +#define AT91_SAMA5D2_LCCWR 0x38 +/* Overrun Status Register */ +#define AT91_SAMA5D2_OVER 0x3c +/* Extended Mode Register */ +#define AT91_SAMA5D2_EMR 0x40 +/* Compare Window Register */ +#define AT91_SAMA5D2_CWR 0x44 +/* Channel Gain Register */ +#define AT91_SAMA5D2_CGR 0x48 +/* Channel Offset Register */ +#define AT91_SAMA5D2_COR 0x4c +/* Channel Data Register 0 */ +#define AT91_SAMA5D2_CDR0 0x50 +/* Analog Control Register */ +#define AT91_SAMA5D2_ACR 0x94 +/* Touchscreen Mode Register */ +#define AT91_SAMA5D2_TSMR 0xb0 +/* Touchscreen X Position Register */ +#define AT91_SAMA5D2_XPOSR 0xb4 +/* Touchscreen Y Position Register */ +#define AT91_SAMA5D2_YPOSR 0xb8 +/* Touchscreen Pressure Register */ +#define AT91_SAMA5D2_PRESSR 0xbc +/* Trigger Register */ +#define AT91_SAMA5D2_TRGR 0xc0 +/* Correction Select Register */ +#define AT91_SAMA5D2_COSR 0xd0 +/* Correction Value Register */ +#define AT91_SAMA5D2_CVR 0xd4 +/* Channel Error Correction Register */ +#define AT91_SAMA5D2_CECR 0xd8 +/* Write Protection Mode Register */ +#define AT91_SAMA5D2_WPMR 0xe4 +/* Write Protection Status Register */ +#define AT91_SAMA5D2_WPSR 0xe8 +/* Version Register */ +#define AT91_SAMA5D2_VERSION 0xfc + +#define AT91_AT91_SAMA5D2_CHAN(num, addr) \ + { \ + .type = IIO_VOLTAGE, \ + .channel = num, \ + .address = addr, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 12, \ + }, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\ + .datasheet_name = "CH"#num, \ + .indexed = 1, \ + } + +#define at91_adc_readl(st, reg) readl_relaxed(st->base + reg) +#define at91_adc_writel(st, reg, val) writel_relaxed(val, st->base + reg) + +struct at91_adc_soc_info { + unsigned startup_time; + unsigned min_sample_rate; + unsigned max_sample_rate; +}; + +struct at91_adc_state { + void __iomem *base; + int irq; + struct clk *per_clk; + struct regulator *reg; + struct regulator *vref; + int vref_uv; + const struct iio_chan_spec *chan; + bool conversion_done; + u32 conversion_value; + struct at91_adc_soc_info soc_info; + wait_queue_head_t wq_data_available; + /* + * lock to prevent concurrent 'single conversion' requests through + * sysfs. + */ + struct mutex lock; +}; + +static const struct iio_chan_spec at91_adc_channels[] = { + AT91_AT91_SAMA5D2_CHAN(0, 0x50), + AT91_AT91_SAMA5D2_CHAN(1, 0x54), + AT91_AT91_SAMA5D2_CHAN(2, 0x58), + AT91_AT91_SAMA5D2_CHAN(3, 0x5c), + AT91_AT91_SAMA5D2_CHAN(4, 0x60), + AT91_AT91_SAMA5D2_CHAN(5, 0x64), + AT91_AT91_SAMA5D2_CHAN(6, 0x68), + AT91_AT91_SAMA5D2_CHAN(7, 0x6c), + AT91_AT91_SAMA5D2_CHAN(8, 0x70), + AT91_AT91_SAMA5D2_CHAN(9, 0x74), + AT91_AT91_SAMA5D2_CHAN(10, 0x78), + AT91_AT91_SAMA5D2_CHAN(11, 0x7c), +}; + +static unsigned at91_adc_startup_time(unsigned startup_time_min, + unsigned adc_clk_khz) +{ + const unsigned startup_lookup[] = { + 0, 8, 16, 24, + 64, 80, 96, 112, + 512, 576, 640, 704, + 768, 832, 896, 960 + }; + unsigned ticks_min, i; + + /* + * Since the adc frequency is checked before, there is no reason + * to not meet the startup time constraint. + */ + + ticks_min = startup_time_min * adc_clk_khz / 1000; + for (i = 0; i < ARRAY_SIZE(startup_lookup); i++) + if (startup_lookup[i] > ticks_min) + break; + + return i; +} + +static void at91_adc_setup_samp_freq(struct at91_adc_state *st, unsigned freq) +{ + struct iio_dev *indio_dev = iio_priv_to_dev(st); + unsigned f_per, prescal, startup; + + f_per = clk_get_rate(st->per_clk); + prescal = (f_per / (2 * freq)) - 1; + + startup = at91_adc_startup_time(st->soc_info.startup_time, + freq / 1000); + + at91_adc_writel(st, AT91_SAMA5D2_MR, + AT91_SAMA5D2_MR_TRANSFER(2) + | AT91_SAMA5D2_MR_STARTUP(startup) + | AT91_SAMA5D2_MR_PRESCAL(prescal)); + + dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u\n", + freq, startup, prescal); +} + +static unsigned at91_adc_get_sample_freq(struct at91_adc_state *st) +{ + unsigned f_adc, f_per = clk_get_rate(st->per_clk); + unsigned mr, prescal; + + mr = at91_adc_readl(st, AT91_SAMA5D2_MR); + prescal = (mr >> AT91_SAMA5D2_MR_PRESCAL_OFFSET) + & AT91_SAMA5D2_MR_PRESCAL_MAX; + f_adc = f_per / (2 * (prescal + 1)); + + return f_adc; +} + +static irqreturn_t at91_adc_interrupt(int irq, void *private) +{ + struct iio_dev *indio = private; + struct at91_adc_state *st = iio_priv(indio); + u32 status = at91_adc_readl(st, AT91_SAMA5D2_ISR); + u32 imr = at91_adc_readl(st, AT91_SAMA5D2_IMR); + + if (status & imr) { + st->conversion_value = at91_adc_readl(st, st->chan->address); + st->conversion_done = true; + wake_up_interruptible(&st->wq_data_available); + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +static int at91_adc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct at91_adc_state *st = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&st->lock); + + st->chan = chan; + + at91_adc_writel(st, AT91_SAMA5D2_CHER, BIT(chan->channel)); + at91_adc_writel(st, AT91_SAMA5D2_IER, BIT(chan->channel)); + at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_START); + + ret = wait_event_interruptible_timeout(st->wq_data_available, + st->conversion_done, + msecs_to_jiffies(1000)); + if (ret == 0) + ret = -ETIMEDOUT; + + if (ret > 0) { + *val = st->conversion_value; + ret = IIO_VAL_INT; + st->conversion_done = false; + } + + at91_adc_writel(st, AT91_SAMA5D2_IDR, BIT(chan->channel)); + at91_adc_writel(st, AT91_SAMA5D2_CHDR, BIT(chan->channel)); + + mutex_unlock(&st->lock); + return ret; + + case IIO_CHAN_INFO_SCALE: + *val = st->vref_uv / 1000; + *val2 = chan->scan_type.realbits; + return IIO_VAL_FRACTIONAL_LOG2; + + case IIO_CHAN_INFO_SAMP_FREQ: + *val = at91_adc_get_sample_freq(st); + return IIO_VAL_INT; + + default: + return -EINVAL; + } +} + +static int at91_adc_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct at91_adc_state *st = iio_priv(indio_dev); + + if (mask != IIO_CHAN_INFO_SAMP_FREQ) + return -EINVAL; + + if (val < st->soc_info.min_sample_rate || + val > st->soc_info.max_sample_rate) + return -EINVAL; + + at91_adc_setup_samp_freq(st, val); + + return 0; +} + +static const struct iio_info at91_adc_info = { + .read_raw = &at91_adc_read_raw, + .write_raw = &at91_adc_write_raw, + .driver_module = THIS_MODULE, +}; + +static int at91_adc_probe(struct platform_device *pdev) +{ + struct iio_dev *indio_dev; + struct at91_adc_state *st; + struct resource *res; + int ret; + + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + indio_dev->dev.parent = &pdev->dev; + indio_dev->name = dev_name(&pdev->dev); + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &at91_adc_info; + indio_dev->channels = at91_adc_channels; + indio_dev->num_channels = ARRAY_SIZE(at91_adc_channels); + + st = iio_priv(indio_dev); + + ret = of_property_read_u32(pdev->dev.of_node, + "atmel,min-sample-rate-hz", + &st->soc_info.min_sample_rate); + if (ret) { + dev_err(&pdev->dev, + "invalid or missing value for atmel,min-sample-rate-hz\n"); + return ret; + } + + ret = of_property_read_u32(pdev->dev.of_node, + "atmel,max-sample-rate-hz", + &st->soc_info.max_sample_rate); + if (ret) { + dev_err(&pdev->dev, + "invalid or missing value for atmel,max-sample-rate-hz\n"); + return ret; + } + + ret = of_property_read_u32(pdev->dev.of_node, "atmel,startup-time-ms", + &st->soc_info.startup_time); + if (ret) { + dev_err(&pdev->dev, + "invalid or missing value for atmel,startup-time-ms\n"); + return ret; + } + + init_waitqueue_head(&st->wq_data_available); + mutex_init(&st->lock); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + + st->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(st->base)) + return PTR_ERR(st->base); + + st->irq = platform_get_irq(pdev, 0); + if (st->irq <= 0) { + if (!st->irq) + st->irq = -ENXIO; + + return st->irq; + } + + st->per_clk = devm_clk_get(&pdev->dev, "adc_clk"); + if (IS_ERR(st->per_clk)) + return PTR_ERR(st->per_clk); + + st->reg = devm_regulator_get(&pdev->dev, "vddana"); + if (IS_ERR(st->reg)) + return PTR_ERR(st->reg); + + st->vref = devm_regulator_get(&pdev->dev, "vref"); + if (IS_ERR(st->vref)) + return PTR_ERR(st->vref); + + ret = devm_request_irq(&pdev->dev, st->irq, at91_adc_interrupt, 0, + pdev->dev.driver->name, indio_dev); + if (ret) + return ret; + + ret = regulator_enable(st->reg); + if (ret) + return ret; + + ret = regulator_enable(st->vref); + if (ret) + goto reg_disable; + + st->vref_uv = regulator_get_voltage(st->vref); + if (st->vref_uv <= 0) { + ret = -EINVAL; + goto vref_disable; + } + + at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_SWRST); + at91_adc_writel(st, AT91_SAMA5D2_IDR, 0xffffffff); + + at91_adc_setup_samp_freq(st, st->soc_info.min_sample_rate); + + ret = clk_prepare_enable(st->per_clk); + if (ret) + goto vref_disable; + + ret = iio_device_register(indio_dev); + if (ret < 0) + goto per_clk_disable_unprepare; + + dev_info(&pdev->dev, "version: %x\n", + readl_relaxed(st->base + AT91_SAMA5D2_VERSION)); + + return 0; + +per_clk_disable_unprepare: + clk_disable_unprepare(st->per_clk); +vref_disable: + regulator_disable(st->vref); +reg_disable: + regulator_disable(st->reg); + return ret; +} + +static int at91_adc_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct at91_adc_state *st = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + + clk_disable_unprepare(st->per_clk); + + regulator_disable(st->vref); + regulator_disable(st->reg); + + return 0; +} + +static const struct of_device_id at91_adc_dt_match[] = { + { + .compatible = "atmel,sama5d2-adc", + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(of, at91_adc_dt_match); + +static struct platform_driver at91_adc_driver = { + .probe = at91_adc_probe, + .remove = at91_adc_remove, + .driver = { + .name = "at91-sama5d2_adc", + .of_match_table = at91_adc_dt_match, + }, +}; +module_platform_driver(at91_adc_driver) + +MODULE_AUTHOR("Ludovic Desroches <ludovic.desroches@atmel.com>"); +MODULE_DESCRIPTION("Atmel AT91 SAMA5D2 ADC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c index 0c904edd6c00..7fd24949c0c1 100644 --- a/drivers/iio/adc/axp288_adc.c +++ b/drivers/iio/adc/axp288_adc.c @@ -46,7 +46,7 @@ struct axp288_adc_info { struct regmap *regmap; }; -static const struct iio_chan_spec const axp288_adc_channels[] = { +static const struct iio_chan_spec axp288_adc_channels[] = { { .indexed = 1, .type = IIO_TEMP, diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c index d803e5018a42..65909d5858b1 100644 --- a/drivers/iio/adc/ina2xx-adc.c +++ b/drivers/iio/adc/ina2xx-adc.c @@ -19,17 +19,18 @@ * * Configurable 7-bit I2C slave address from 0x40 to 0x4F */ -#include <linux/module.h> -#include <linux/kthread.h> + #include <linux/delay.h> +#include <linux/i2c.h> #include <linux/iio/kfifo_buf.h> #include <linux/iio/sysfs.h> -#include <linux/i2c.h> +#include <linux/kthread.h> +#include <linux/module.h> #include <linux/regmap.h> -#include <linux/platform_data/ina2xx.h> - #include <linux/util_macros.h> +#include <linux/platform_data/ina2xx.h> + /* INA2XX registers definition */ #define INA2XX_CONFIG 0x00 #define INA2XX_SHUNT_VOLTAGE 0x01 /* readonly */ @@ -38,7 +39,7 @@ #define INA2XX_CURRENT 0x04 /* readonly */ #define INA2XX_CALIBRATION 0x05 -#define INA226_ALERT_MASK 0x06 +#define INA226_ALERT_MASK GENMASK(2, 1) #define INA266_CVRF BIT(3) #define INA2XX_MAX_REGISTERS 8 @@ -113,7 +114,7 @@ struct ina2xx_chip_info { struct mutex state_lock; unsigned int shunt_resistor; int avg; - s64 prev_ns; /* track buffer capture time, check for underruns*/ + s64 prev_ns; /* track buffer capture time, check for underruns */ int int_time_vbus; /* Bus voltage integration time uS */ int int_time_vshunt; /* Shunt voltage integration time uS */ bool allow_async_readout; @@ -121,21 +122,21 @@ struct ina2xx_chip_info { static const struct ina2xx_config ina2xx_config[] = { [ina219] = { - .config_default = INA219_CONFIG_DEFAULT, - .calibration_factor = 40960000, - .shunt_div = 100, - .bus_voltage_shift = 3, - .bus_voltage_lsb = 4000, - .power_lsb = 20000, - }, + .config_default = INA219_CONFIG_DEFAULT, + .calibration_factor = 40960000, + .shunt_div = 100, + .bus_voltage_shift = 3, + .bus_voltage_lsb = 4000, + .power_lsb = 20000, + }, [ina226] = { - .config_default = INA226_CONFIG_DEFAULT, - .calibration_factor = 5120000, - .shunt_div = 400, - .bus_voltage_shift = 0, - .bus_voltage_lsb = 1250, - .power_lsb = 25000, - }, + .config_default = INA226_CONFIG_DEFAULT, + .calibration_factor = 5120000, + .shunt_div = 400, + .bus_voltage_shift = 0, + .bus_voltage_lsb = 1250, + .power_lsb = 25000, + }, }; static int ina2xx_read_raw(struct iio_dev *indio_dev, @@ -149,7 +150,7 @@ static int ina2xx_read_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_RAW: ret = regmap_read(chip->regmap, chan->address, ®val); - if (ret < 0) + if (ret) return ret; if (is_signed_reg(chan->address)) @@ -251,7 +252,7 @@ static int ina226_set_int_time_vbus(struct ina2xx_chip_info *chip, return -EINVAL; bits = find_closest(val_us, ina226_conv_time_tab, - ARRAY_SIZE(ina226_conv_time_tab)); + ARRAY_SIZE(ina226_conv_time_tab)); chip->int_time_vbus = ina226_conv_time_tab[bits]; @@ -270,7 +271,7 @@ static int ina226_set_int_time_vshunt(struct ina2xx_chip_info *chip, return -EINVAL; bits = find_closest(val_us, ina226_conv_time_tab, - ARRAY_SIZE(ina226_conv_time_tab)); + ARRAY_SIZE(ina226_conv_time_tab)); chip->int_time_vshunt = ina226_conv_time_tab[bits]; @@ -285,8 +286,8 @@ static int ina2xx_write_raw(struct iio_dev *indio_dev, int val, int val2, long mask) { struct ina2xx_chip_info *chip = iio_priv(indio_dev); - int ret; unsigned int config, tmp; + int ret; if (iio_buffer_enabled(indio_dev)) return -EBUSY; @@ -294,8 +295,8 @@ static int ina2xx_write_raw(struct iio_dev *indio_dev, mutex_lock(&chip->state_lock); ret = regmap_read(chip->regmap, INA2XX_CONFIG, &config); - if (ret < 0) - goto _err; + if (ret) + goto err; tmp = config; @@ -310,19 +311,19 @@ static int ina2xx_write_raw(struct iio_dev *indio_dev, else ret = ina226_set_int_time_vbus(chip, val2, &tmp); break; + default: ret = -EINVAL; } if (!ret && (tmp != config)) ret = regmap_write(chip->regmap, INA2XX_CONFIG, tmp); -_err: +err: mutex_unlock(&chip->state_lock); return ret; } - static ssize_t ina2xx_allow_async_readout_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -355,6 +356,7 @@ static int set_shunt_resistor(struct ina2xx_chip_info *chip, unsigned int val) return -EINVAL; chip->shunt_resistor = val; + return 0; } @@ -438,7 +440,6 @@ static int ina2xx_work_buffer(struct iio_dev *indio_dev) struct ina2xx_chip_info *chip = iio_priv(indio_dev); unsigned short data[8]; int bit, ret, i = 0; - unsigned long buffer_us, elapsed_us; s64 time_a, time_b; unsigned int alert; @@ -462,8 +463,6 @@ static int ina2xx_work_buffer(struct iio_dev *indio_dev) return ret; alert &= INA266_CVRF; - trace_printk("Conversion ready: %d\n", !!alert); - } while (!alert); /* @@ -488,19 +487,14 @@ static int ina2xx_work_buffer(struct iio_dev *indio_dev) iio_push_to_buffers_with_timestamp(indio_dev, (unsigned int *)data, time_a); - buffer_us = (unsigned long)(time_b - time_a) / 1000; - elapsed_us = (unsigned long)(time_a - chip->prev_ns) / 1000; - - trace_printk("uS: elapsed: %lu, buf: %lu\n", elapsed_us, buffer_us); - chip->prev_ns = time_a; - return buffer_us; + return (unsigned long)(time_b - time_a) / 1000; }; static int ina2xx_capture_thread(void *data) { - struct iio_dev *indio_dev = (struct iio_dev *)data; + struct iio_dev *indio_dev = data; struct ina2xx_chip_info *chip = iio_priv(indio_dev); unsigned int sampling_us = SAMPLING_PERIOD(chip); int buffer_us; @@ -530,12 +524,13 @@ static int ina2xx_buffer_enable(struct iio_dev *indio_dev) struct ina2xx_chip_info *chip = iio_priv(indio_dev); unsigned int sampling_us = SAMPLING_PERIOD(chip); - trace_printk("Enabling buffer w/ scan_mask %02x, freq = %d, avg =%u\n", - (unsigned int)(*indio_dev->active_scan_mask), - 1000000/sampling_us, chip->avg); + dev_dbg(&indio_dev->dev, "Enabling buffer w/ scan_mask %02x, freq = %d, avg =%u\n", + (unsigned int)(*indio_dev->active_scan_mask), + 1000000 / sampling_us, chip->avg); - trace_printk("Expected work period: %u us\n", sampling_us); - trace_printk("Async readout mode: %d\n", chip->allow_async_readout); + dev_dbg(&indio_dev->dev, "Expected work period: %u us\n", sampling_us); + dev_dbg(&indio_dev->dev, "Async readout mode: %d\n", + chip->allow_async_readout); chip->prev_ns = iio_get_time_ns(); @@ -575,8 +570,7 @@ static int ina2xx_debug_reg(struct iio_dev *indio_dev, } /* Possible integration times for vshunt and vbus */ -static IIO_CONST_ATTR_INT_TIME_AVAIL \ - ("0.000140 0.000204 0.000332 0.000588 0.001100 0.002116 0.004156 0.008244"); +static IIO_CONST_ATTR_INT_TIME_AVAIL("0.000140 0.000204 0.000332 0.000588 0.001100 0.002116 0.004156 0.008244"); static IIO_DEVICE_ATTR(in_allow_async_readout, S_IRUGO | S_IWUSR, ina2xx_allow_async_readout_show, @@ -598,21 +592,23 @@ static const struct attribute_group ina2xx_attribute_group = { }; static const struct iio_info ina2xx_info = { - .debugfs_reg_access = &ina2xx_debug_reg, - .read_raw = &ina2xx_read_raw, - .write_raw = &ina2xx_write_raw, - .attrs = &ina2xx_attribute_group, .driver_module = THIS_MODULE, + .attrs = &ina2xx_attribute_group, + .read_raw = ina2xx_read_raw, + .write_raw = ina2xx_write_raw, + .debugfs_reg_access = ina2xx_debug_reg, }; /* Initialize the configuration and calibration registers. */ static int ina2xx_init(struct ina2xx_chip_info *chip, unsigned int config) { u16 regval; - int ret = regmap_write(chip->regmap, INA2XX_CONFIG, config); + int ret; - if (ret < 0) + ret = regmap_write(chip->regmap, INA2XX_CONFIG, config); + if (ret) return ret; + /* * Set current LSB to 1mA, shunt is in uOhms * (equation 13 in datasheet). We hardcode a Current_LSB @@ -621,7 +617,7 @@ static int ina2xx_init(struct ina2xx_chip_info *chip, unsigned int config) * to the user for now. */ regval = DIV_ROUND_CLOSEST(chip->config->calibration_factor, - chip->shunt_resistor); + chip->shunt_resistor); return regmap_write(chip->regmap, INA2XX_CALIBRATION, regval); } @@ -632,8 +628,8 @@ static int ina2xx_probe(struct i2c_client *client, struct ina2xx_chip_info *chip; struct iio_dev *indio_dev; struct iio_buffer *buffer; - int ret; unsigned int val; + int ret; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip)); if (!indio_dev) @@ -641,8 +637,19 @@ static int ina2xx_probe(struct i2c_client *client, chip = iio_priv(indio_dev); + /* This is only used for device removal purposes. */ + i2c_set_clientdata(client, indio_dev); + + chip->regmap = devm_regmap_init_i2c(client, &ina2xx_regmap_config); + if (IS_ERR(chip->regmap)) { + dev_err(&client->dev, "failed to allocate register map\n"); + return PTR_ERR(chip->regmap); + } + chip->config = &ina2xx_config[id->driver_data]; + mutex_init(&chip->state_lock); + if (of_property_read_u32(client->dev.of_node, "shunt-resistor", &val) < 0) { struct ina2xx_platform_data *pdata = @@ -658,25 +665,6 @@ static int ina2xx_probe(struct i2c_client *client, if (ret) return ret; - mutex_init(&chip->state_lock); - - /* This is only used for device removal purposes. */ - i2c_set_clientdata(client, indio_dev); - - indio_dev->name = id->name; - indio_dev->channels = ina2xx_channels; - indio_dev->num_channels = ARRAY_SIZE(ina2xx_channels); - - indio_dev->dev.parent = &client->dev; - indio_dev->info = &ina2xx_info; - indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE; - - chip->regmap = devm_regmap_init_i2c(client, &ina2xx_regmap_config); - if (IS_ERR(chip->regmap)) { - dev_err(&client->dev, "failed to allocate register map\n"); - return PTR_ERR(chip->regmap); - } - /* Patch the current config register with default. */ val = chip->config->config_default; @@ -687,24 +675,28 @@ static int ina2xx_probe(struct i2c_client *client, } ret = ina2xx_init(chip, val); - if (ret < 0) { - dev_err(&client->dev, "error configuring the device: %d\n", - ret); - return -ENODEV; + if (ret) { + dev_err(&client->dev, "error configuring the device\n"); + return ret; } + indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE; + indio_dev->dev.parent = &client->dev; + indio_dev->channels = ina2xx_channels; + indio_dev->num_channels = ARRAY_SIZE(ina2xx_channels); + indio_dev->name = id->name; + indio_dev->info = &ina2xx_info; + indio_dev->setup_ops = &ina2xx_setup_ops; + buffer = devm_iio_kfifo_allocate(&indio_dev->dev); if (!buffer) return -ENOMEM; - indio_dev->setup_ops = &ina2xx_setup_ops; - iio_device_attach_buffer(indio_dev, buffer); return iio_device_register(indio_dev); } - static int ina2xx_remove(struct i2c_client *client) { struct iio_dev *indio_dev = i2c_get_clientdata(client); @@ -717,7 +709,6 @@ static int ina2xx_remove(struct i2c_client *client) INA2XX_MODE_MASK, 0); } - static const struct i2c_device_id ina2xx_id[] = { {"ina219", ina219}, {"ina220", ina219}, @@ -726,7 +717,6 @@ static const struct i2c_device_id ina2xx_id[] = { {"ina231", ina226}, {} }; - MODULE_DEVICE_TABLE(i2c, ina2xx_id); static struct i2c_driver ina2xx_driver = { @@ -737,7 +727,6 @@ static struct i2c_driver ina2xx_driver = { .remove = ina2xx_remove, .id_table = ina2xx_id, }; - module_i2c_driver(ina2xx_driver); MODULE_AUTHOR("Marc Titinger <marc.titinger@baylibre.com>"); diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c index d1c05f6eed18..a850ca7d1eda 100644 --- a/drivers/iio/adc/mcp320x.c +++ b/drivers/iio/adc/mcp320x.c @@ -187,26 +187,27 @@ out: .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ } -#define MCP320X_VOLTAGE_CHANNEL_DIFF(num) \ +#define MCP320X_VOLTAGE_CHANNEL_DIFF(chan1, chan2) \ { \ .type = IIO_VOLTAGE, \ .indexed = 1, \ - .channel = (num * 2), \ - .channel2 = (num * 2 + 1), \ - .address = (num * 2), \ + .channel = (chan1), \ + .channel2 = (chan2), \ + .address = (chan1), \ .differential = 1, \ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ } static const struct iio_chan_spec mcp3201_channels[] = { - MCP320X_VOLTAGE_CHANNEL_DIFF(0), + MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1), }; static const struct iio_chan_spec mcp3202_channels[] = { MCP320X_VOLTAGE_CHANNEL(0), MCP320X_VOLTAGE_CHANNEL(1), - MCP320X_VOLTAGE_CHANNEL_DIFF(0), + MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1), + MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0), }; static const struct iio_chan_spec mcp3204_channels[] = { @@ -214,8 +215,10 @@ static const struct iio_chan_spec mcp3204_channels[] = { MCP320X_VOLTAGE_CHANNEL(1), MCP320X_VOLTAGE_CHANNEL(2), MCP320X_VOLTAGE_CHANNEL(3), - MCP320X_VOLTAGE_CHANNEL_DIFF(0), - MCP320X_VOLTAGE_CHANNEL_DIFF(1), + MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1), + MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0), + MCP320X_VOLTAGE_CHANNEL_DIFF(2, 3), + MCP320X_VOLTAGE_CHANNEL_DIFF(3, 2), }; static const struct iio_chan_spec mcp3208_channels[] = { @@ -227,10 +230,14 @@ static const struct iio_chan_spec mcp3208_channels[] = { MCP320X_VOLTAGE_CHANNEL(5), MCP320X_VOLTAGE_CHANNEL(6), MCP320X_VOLTAGE_CHANNEL(7), - MCP320X_VOLTAGE_CHANNEL_DIFF(0), - MCP320X_VOLTAGE_CHANNEL_DIFF(1), - MCP320X_VOLTAGE_CHANNEL_DIFF(2), - MCP320X_VOLTAGE_CHANNEL_DIFF(3), + MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1), + MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0), + MCP320X_VOLTAGE_CHANNEL_DIFF(2, 3), + MCP320X_VOLTAGE_CHANNEL_DIFF(3, 2), + MCP320X_VOLTAGE_CHANNEL_DIFF(4, 5), + MCP320X_VOLTAGE_CHANNEL_DIFF(5, 4), + MCP320X_VOLTAGE_CHANNEL_DIFF(6, 7), + MCP320X_VOLTAGE_CHANNEL_DIFF(7, 6), }; static const struct iio_info mcp320x_info = { diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c index 6eca7aea8a37..d7b36efd2f3c 100644 --- a/drivers/iio/adc/mcp3422.c +++ b/drivers/iio/adc/mcp3422.c @@ -1,11 +1,12 @@ /* - * mcp3422.c - driver for the Microchip mcp3422/3/4/6/7/8 chip family + * mcp3422.c - driver for the Microchip mcp3421/2/3/4/5/6/7/8 chip family * * Copyright (C) 2013, Angelo Compagnucci * Author: Angelo Compagnucci <angelo.compagnucci@gmail.com> * * Datasheet: http://ww1.microchip.com/downloads/en/devicedoc/22088b.pdf * http://ww1.microchip.com/downloads/en/DeviceDoc/22226a.pdf + * http://ww1.microchip.com/downloads/en/DeviceDoc/22072b.pdf * * This driver exports the value of analog input voltage to sysfs, the * voltage unit is nV. @@ -338,7 +339,7 @@ static int mcp3422_probe(struct i2c_client *client, u8 config; if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) - return -ENODEV; + return -EOPNOTSUPP; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*adc)); if (!indio_dev) @@ -357,6 +358,7 @@ static int mcp3422_probe(struct i2c_client *client, switch (adc->id) { case 1: + case 5: indio_dev->channels = mcp3421_channels; indio_dev->num_channels = ARRAY_SIZE(mcp3421_channels); break; @@ -395,6 +397,7 @@ static const struct i2c_device_id mcp3422_id[] = { { "mcp3422", 2 }, { "mcp3423", 3 }, { "mcp3424", 4 }, + { "mcp3425", 5 }, { "mcp3426", 6 }, { "mcp3427", 7 }, { "mcp3428", 8 }, @@ -421,5 +424,5 @@ static struct i2c_driver mcp3422_driver = { module_i2c_driver(mcp3422_driver); MODULE_AUTHOR("Angelo Compagnucci <angelo.compagnucci@gmail.com>"); -MODULE_DESCRIPTION("Microchip mcp3422/3/4/6/7/8 driver"); +MODULE_DESCRIPTION("Microchip mcp3421/2/3/4/5/6/7/8 driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/mxs-lradc.c b/drivers/iio/adc/mxs-lradc.c new file mode 100644 index 000000000000..33051b87aac2 --- /dev/null +++ b/drivers/iio/adc/mxs-lradc.c @@ -0,0 +1,1775 @@ +/* + * Freescale MXS LRADC driver + * + * Copyright (c) 2012 DENX Software Engineering, GmbH. + * Marek Vasut <marex@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/completion.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/stmp_device.h> +#include <linux/sysfs.h> + +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/sysfs.h> + +#define DRIVER_NAME "mxs-lradc" + +#define LRADC_MAX_DELAY_CHANS 4 +#define LRADC_MAX_MAPPED_CHANS 8 +#define LRADC_MAX_TOTAL_CHANS 16 + +#define LRADC_DELAY_TIMER_HZ 2000 + +/* + * Make this runtime configurable if necessary. Currently, if the buffered mode + * is enabled, the LRADC takes LRADC_DELAY_TIMER_LOOP samples of data before + * triggering IRQ. The sampling happens every (LRADC_DELAY_TIMER_PER / 2000) + * seconds. The result is that the samples arrive every 500mS. + */ +#define LRADC_DELAY_TIMER_PER 200 +#define LRADC_DELAY_TIMER_LOOP 5 + +/* + * Once the pen touches the touchscreen, the touchscreen switches from + * IRQ-driven mode to polling mode to prevent interrupt storm. The polling + * is realized by worker thread, which is called every 20 or so milliseconds. + * This gives the touchscreen enough fluency and does not strain the system + * too much. + */ +#define LRADC_TS_SAMPLE_DELAY_MS 5 + +/* + * The LRADC reads the following amount of samples from each touchscreen + * channel and the driver then computes average of these. + */ +#define LRADC_TS_SAMPLE_AMOUNT 4 + +enum mxs_lradc_id { + IMX23_LRADC, + IMX28_LRADC, +}; + +static const char * const mx23_lradc_irq_names[] = { + "mxs-lradc-touchscreen", + "mxs-lradc-channel0", + "mxs-lradc-channel1", + "mxs-lradc-channel2", + "mxs-lradc-channel3", + "mxs-lradc-channel4", + "mxs-lradc-channel5", + "mxs-lradc-channel6", + "mxs-lradc-channel7", +}; + +static const char * const mx28_lradc_irq_names[] = { + "mxs-lradc-touchscreen", + "mxs-lradc-thresh0", + "mxs-lradc-thresh1", + "mxs-lradc-channel0", + "mxs-lradc-channel1", + "mxs-lradc-channel2", + "mxs-lradc-channel3", + "mxs-lradc-channel4", + "mxs-lradc-channel5", + "mxs-lradc-channel6", + "mxs-lradc-channel7", + "mxs-lradc-button0", + "mxs-lradc-button1", +}; + +struct mxs_lradc_of_config { + const int irq_count; + const char * const *irq_name; + const u32 *vref_mv; +}; + +#define VREF_MV_BASE 1850 + +static const u32 mx23_vref_mv[LRADC_MAX_TOTAL_CHANS] = { + VREF_MV_BASE, /* CH0 */ + VREF_MV_BASE, /* CH1 */ + VREF_MV_BASE, /* CH2 */ + VREF_MV_BASE, /* CH3 */ + VREF_MV_BASE, /* CH4 */ + VREF_MV_BASE, /* CH5 */ + VREF_MV_BASE * 2, /* CH6 VDDIO */ + VREF_MV_BASE * 4, /* CH7 VBATT */ + VREF_MV_BASE, /* CH8 Temp sense 0 */ + VREF_MV_BASE, /* CH9 Temp sense 1 */ + VREF_MV_BASE, /* CH10 */ + VREF_MV_BASE, /* CH11 */ + VREF_MV_BASE, /* CH12 USB_DP */ + VREF_MV_BASE, /* CH13 USB_DN */ + VREF_MV_BASE, /* CH14 VBG */ + VREF_MV_BASE * 4, /* CH15 VDD5V */ +}; + +static const u32 mx28_vref_mv[LRADC_MAX_TOTAL_CHANS] = { + VREF_MV_BASE, /* CH0 */ + VREF_MV_BASE, /* CH1 */ + VREF_MV_BASE, /* CH2 */ + VREF_MV_BASE, /* CH3 */ + VREF_MV_BASE, /* CH4 */ + VREF_MV_BASE, /* CH5 */ + VREF_MV_BASE, /* CH6 */ + VREF_MV_BASE * 4, /* CH7 VBATT */ + VREF_MV_BASE, /* CH8 Temp sense 0 */ + VREF_MV_BASE, /* CH9 Temp sense 1 */ + VREF_MV_BASE * 2, /* CH10 VDDIO */ + VREF_MV_BASE, /* CH11 VTH */ + VREF_MV_BASE * 2, /* CH12 VDDA */ + VREF_MV_BASE, /* CH13 VDDD */ + VREF_MV_BASE, /* CH14 VBG */ + VREF_MV_BASE * 4, /* CH15 VDD5V */ +}; + +static const struct mxs_lradc_of_config mxs_lradc_of_config[] = { + [IMX23_LRADC] = { + .irq_count = ARRAY_SIZE(mx23_lradc_irq_names), + .irq_name = mx23_lradc_irq_names, + .vref_mv = mx23_vref_mv, + }, + [IMX28_LRADC] = { + .irq_count = ARRAY_SIZE(mx28_lradc_irq_names), + .irq_name = mx28_lradc_irq_names, + .vref_mv = mx28_vref_mv, + }, +}; + +enum mxs_lradc_ts { + MXS_LRADC_TOUCHSCREEN_NONE = 0, + MXS_LRADC_TOUCHSCREEN_4WIRE, + MXS_LRADC_TOUCHSCREEN_5WIRE, +}; + +/* + * Touchscreen handling + */ +enum lradc_ts_plate { + LRADC_TOUCH = 0, + LRADC_SAMPLE_X, + LRADC_SAMPLE_Y, + LRADC_SAMPLE_PRESSURE, + LRADC_SAMPLE_VALID, +}; + +enum mxs_lradc_divbytwo { + MXS_LRADC_DIV_DISABLED = 0, + MXS_LRADC_DIV_ENABLED, +}; + +struct mxs_lradc_scale { + unsigned int integer; + unsigned int nano; +}; + +struct mxs_lradc { + struct device *dev; + void __iomem *base; + int irq[13]; + + struct clk *clk; + + u32 *buffer; + struct iio_trigger *trig; + + struct mutex lock; + + struct completion completion; + + const u32 *vref_mv; + struct mxs_lradc_scale scale_avail[LRADC_MAX_TOTAL_CHANS][2]; + unsigned long is_divided; + + /* + * When the touchscreen is enabled, we give it two private virtual + * channels: #6 and #7. This means that only 6 virtual channels (instead + * of 8) will be available for buffered capture. + */ +#define TOUCHSCREEN_VCHANNEL1 7 +#define TOUCHSCREEN_VCHANNEL2 6 +#define BUFFER_VCHANS_LIMITED 0x3f +#define BUFFER_VCHANS_ALL 0xff + u8 buffer_vchans; + + /* + * Furthermore, certain LRADC channels are shared between touchscreen + * and/or touch-buttons and generic LRADC block. Therefore when using + * either of these, these channels are not available for the regular + * sampling. The shared channels are as follows: + * + * CH0 -- Touch button #0 + * CH1 -- Touch button #1 + * CH2 -- Touch screen XPUL + * CH3 -- Touch screen YPLL + * CH4 -- Touch screen XNUL + * CH5 -- Touch screen YNLR + * CH6 -- Touch screen WIPER (5-wire only) + * + * The bit fields below represents which parts of the LRADC block are + * switched into special mode of operation. These channels can not + * be sampled as regular LRADC channels. The driver will refuse any + * attempt to sample these channels. + */ +#define CHAN_MASK_TOUCHBUTTON (BIT(1) | BIT(0)) +#define CHAN_MASK_TOUCHSCREEN_4WIRE (0xf << 2) +#define CHAN_MASK_TOUCHSCREEN_5WIRE (0x1f << 2) + enum mxs_lradc_ts use_touchscreen; + bool use_touchbutton; + + struct input_dev *ts_input; + + enum mxs_lradc_id soc; + enum lradc_ts_plate cur_plate; /* state machine */ + bool ts_valid; + unsigned ts_x_pos; + unsigned ts_y_pos; + unsigned ts_pressure; + + /* handle touchscreen's physical behaviour */ + /* samples per coordinate */ + unsigned over_sample_cnt; + /* time clocks between samples */ + unsigned over_sample_delay; + /* time in clocks to wait after the plates where switched */ + unsigned settling_delay; +}; + +#define LRADC_CTRL0 0x00 +# define LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE BIT(23) +# define LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE BIT(22) +# define LRADC_CTRL0_MX28_YNNSW /* YM */ BIT(21) +# define LRADC_CTRL0_MX28_YPNSW /* YP */ BIT(20) +# define LRADC_CTRL0_MX28_YPPSW /* YP */ BIT(19) +# define LRADC_CTRL0_MX28_XNNSW /* XM */ BIT(18) +# define LRADC_CTRL0_MX28_XNPSW /* XM */ BIT(17) +# define LRADC_CTRL0_MX28_XPPSW /* XP */ BIT(16) + +# define LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE BIT(20) +# define LRADC_CTRL0_MX23_YM BIT(19) +# define LRADC_CTRL0_MX23_XM BIT(18) +# define LRADC_CTRL0_MX23_YP BIT(17) +# define LRADC_CTRL0_MX23_XP BIT(16) + +# define LRADC_CTRL0_MX28_PLATE_MASK \ + (LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE | \ + LRADC_CTRL0_MX28_YNNSW | LRADC_CTRL0_MX28_YPNSW | \ + LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW | \ + LRADC_CTRL0_MX28_XNPSW | LRADC_CTRL0_MX28_XPPSW) + +# define LRADC_CTRL0_MX23_PLATE_MASK \ + (LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE | \ + LRADC_CTRL0_MX23_YM | LRADC_CTRL0_MX23_XM | \ + LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XP) + +#define LRADC_CTRL1 0x10 +#define LRADC_CTRL1_TOUCH_DETECT_IRQ_EN BIT(24) +#define LRADC_CTRL1_LRADC_IRQ_EN(n) (1 << ((n) + 16)) +#define LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK (0x1fff << 16) +#define LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK (0x01ff << 16) +#define LRADC_CTRL1_LRADC_IRQ_EN_OFFSET 16 +#define LRADC_CTRL1_TOUCH_DETECT_IRQ BIT(8) +#define LRADC_CTRL1_LRADC_IRQ(n) (1 << (n)) +#define LRADC_CTRL1_MX28_LRADC_IRQ_MASK 0x1fff +#define LRADC_CTRL1_MX23_LRADC_IRQ_MASK 0x01ff +#define LRADC_CTRL1_LRADC_IRQ_OFFSET 0 + +#define LRADC_CTRL2 0x20 +#define LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET 24 +#define LRADC_CTRL2_TEMPSENSE_PWD BIT(15) + +#define LRADC_STATUS 0x40 +#define LRADC_STATUS_TOUCH_DETECT_RAW BIT(0) + +#define LRADC_CH(n) (0x50 + (0x10 * (n))) +#define LRADC_CH_ACCUMULATE BIT(29) +#define LRADC_CH_NUM_SAMPLES_MASK (0x1f << 24) +#define LRADC_CH_NUM_SAMPLES_OFFSET 24 +#define LRADC_CH_NUM_SAMPLES(x) \ + ((x) << LRADC_CH_NUM_SAMPLES_OFFSET) +#define LRADC_CH_VALUE_MASK 0x3ffff +#define LRADC_CH_VALUE_OFFSET 0 + +#define LRADC_DELAY(n) (0xd0 + (0x10 * (n))) +#define LRADC_DELAY_TRIGGER_LRADCS_MASK (0xffUL << 24) +#define LRADC_DELAY_TRIGGER_LRADCS_OFFSET 24 +#define LRADC_DELAY_TRIGGER(x) \ + (((x) << LRADC_DELAY_TRIGGER_LRADCS_OFFSET) & \ + LRADC_DELAY_TRIGGER_LRADCS_MASK) +#define LRADC_DELAY_KICK BIT(20) +#define LRADC_DELAY_TRIGGER_DELAYS_MASK (0xf << 16) +#define LRADC_DELAY_TRIGGER_DELAYS_OFFSET 16 +#define LRADC_DELAY_TRIGGER_DELAYS(x) \ + (((x) << LRADC_DELAY_TRIGGER_DELAYS_OFFSET) & \ + LRADC_DELAY_TRIGGER_DELAYS_MASK) +#define LRADC_DELAY_LOOP_COUNT_MASK (0x1f << 11) +#define LRADC_DELAY_LOOP_COUNT_OFFSET 11 +#define LRADC_DELAY_LOOP(x) \ + (((x) << LRADC_DELAY_LOOP_COUNT_OFFSET) & \ + LRADC_DELAY_LOOP_COUNT_MASK) +#define LRADC_DELAY_DELAY_MASK 0x7ff +#define LRADC_DELAY_DELAY_OFFSET 0 +#define LRADC_DELAY_DELAY(x) \ + (((x) << LRADC_DELAY_DELAY_OFFSET) & \ + LRADC_DELAY_DELAY_MASK) + +#define LRADC_CTRL4 0x140 +#define LRADC_CTRL4_LRADCSELECT_MASK(n) (0xf << ((n) * 4)) +#define LRADC_CTRL4_LRADCSELECT_OFFSET(n) ((n) * 4) +#define LRADC_CTRL4_LRADCSELECT(n, x) \ + (((x) << LRADC_CTRL4_LRADCSELECT_OFFSET(n)) & \ + LRADC_CTRL4_LRADCSELECT_MASK(n)) + +#define LRADC_RESOLUTION 12 +#define LRADC_SINGLE_SAMPLE_MASK ((1 << LRADC_RESOLUTION) - 1) + +static void mxs_lradc_reg_set(struct mxs_lradc *lradc, u32 val, u32 reg) +{ + writel(val, lradc->base + reg + STMP_OFFSET_REG_SET); +} + +static void mxs_lradc_reg_clear(struct mxs_lradc *lradc, u32 val, u32 reg) +{ + writel(val, lradc->base + reg + STMP_OFFSET_REG_CLR); +} + +static void mxs_lradc_reg_wrt(struct mxs_lradc *lradc, u32 val, u32 reg) +{ + writel(val, lradc->base + reg); +} + +static u32 mxs_lradc_plate_mask(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL0_MX23_PLATE_MASK; + return LRADC_CTRL0_MX28_PLATE_MASK; +} + +static u32 mxs_lradc_irq_en_mask(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK; + return LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK; +} + +static u32 mxs_lradc_irq_mask(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL1_MX23_LRADC_IRQ_MASK; + return LRADC_CTRL1_MX28_LRADC_IRQ_MASK; +} + +static u32 mxs_lradc_touch_detect_bit(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE; + return LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE; +} + +static u32 mxs_lradc_drive_x_plate(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL0_MX23_XP | LRADC_CTRL0_MX23_XM; + return LRADC_CTRL0_MX28_XPPSW | LRADC_CTRL0_MX28_XNNSW; +} + +static u32 mxs_lradc_drive_y_plate(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_YM; + return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_YNNSW; +} + +static u32 mxs_lradc_drive_pressure(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XM; + return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW; +} + +static bool mxs_lradc_check_touch_event(struct mxs_lradc *lradc) +{ + return !!(readl(lradc->base + LRADC_STATUS) & + LRADC_STATUS_TOUCH_DETECT_RAW); +} + +static void mxs_lradc_map_channel(struct mxs_lradc *lradc, unsigned vch, + unsigned ch) +{ + mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(vch), + LRADC_CTRL4); + mxs_lradc_reg_set(lradc, LRADC_CTRL4_LRADCSELECT(vch, ch), LRADC_CTRL4); +} + +static void mxs_lradc_setup_ts_channel(struct mxs_lradc *lradc, unsigned ch) +{ + /* + * prepare for oversampling conversion + * + * from the datasheet: + * "The ACCUMULATE bit in the appropriate channel register + * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0; + * otherwise, the IRQs will not fire." + */ + mxs_lradc_reg_wrt(lradc, LRADC_CH_ACCUMULATE | + LRADC_CH_NUM_SAMPLES(lradc->over_sample_cnt - 1), + LRADC_CH(ch)); + + /* + * from the datasheet: + * "Software must clear this register in preparation for a + * multi-cycle accumulation. + */ + mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch)); + + /* + * prepare the delay/loop unit according to the oversampling count + * + * from the datasheet: + * "The DELAY fields in HW_LRADC_DELAY0, HW_LRADC_DELAY1, + * HW_LRADC_DELAY2, and HW_LRADC_DELAY3 must be non-zero; otherwise, + * the LRADC will not trigger the delay group." + */ + mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(1 << ch) | + LRADC_DELAY_TRIGGER_DELAYS(0) | + LRADC_DELAY_LOOP(lradc->over_sample_cnt - 1) | + LRADC_DELAY_DELAY(lradc->over_sample_delay - 1), + LRADC_DELAY(3)); + + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch), LRADC_CTRL1); + + /* + * after changing the touchscreen plates setting + * the signals need some initial time to settle. Start the + * SoC's delay unit and start the conversion later + * and automatically. + */ + mxs_lradc_reg_wrt( + lradc, + LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */ + LRADC_DELAY_TRIGGER_DELAYS(BIT(3)) | /* trigger DELAY unit#3 */ + LRADC_DELAY_KICK | + LRADC_DELAY_DELAY(lradc->settling_delay), + LRADC_DELAY(2)); +} + +/* + * Pressure detection is special: + * We want to do both required measurements for the pressure detection in + * one turn. Use the hardware features to chain both conversions and let the + * hardware report one interrupt if both conversions are done + */ +static void mxs_lradc_setup_ts_pressure(struct mxs_lradc *lradc, unsigned ch1, + unsigned ch2) +{ + u32 reg; + + /* + * prepare for oversampling conversion + * + * from the datasheet: + * "The ACCUMULATE bit in the appropriate channel register + * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0; + * otherwise, the IRQs will not fire." + */ + reg = LRADC_CH_ACCUMULATE | + LRADC_CH_NUM_SAMPLES(lradc->over_sample_cnt - 1); + mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch1)); + mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch2)); + + /* + * from the datasheet: + * "Software must clear this register in preparation for a + * multi-cycle accumulation. + */ + mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch1)); + mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch2)); + + /* prepare the delay/loop unit according to the oversampling count */ + mxs_lradc_reg_wrt( + lradc, + LRADC_DELAY_TRIGGER(1 << ch1) | + LRADC_DELAY_TRIGGER(1 << ch2) | /* start both channels */ + LRADC_DELAY_TRIGGER_DELAYS(0) | + LRADC_DELAY_LOOP(lradc->over_sample_cnt - 1) | + LRADC_DELAY_DELAY(lradc->over_sample_delay - 1), + LRADC_DELAY(3)); + + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch2), LRADC_CTRL1); + + /* + * after changing the touchscreen plates setting + * the signals need some initial time to settle. Start the + * SoC's delay unit and start the conversion later + * and automatically. + */ + mxs_lradc_reg_wrt( + lradc, + LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */ + LRADC_DELAY_TRIGGER_DELAYS(BIT(3)) | /* trigger DELAY unit#3 */ + LRADC_DELAY_KICK | + LRADC_DELAY_DELAY(lradc->settling_delay), LRADC_DELAY(2)); +} + +static unsigned mxs_lradc_read_raw_channel(struct mxs_lradc *lradc, + unsigned channel) +{ + u32 reg; + unsigned num_samples, val; + + reg = readl(lradc->base + LRADC_CH(channel)); + if (reg & LRADC_CH_ACCUMULATE) + num_samples = lradc->over_sample_cnt; + else + num_samples = 1; + + val = (reg & LRADC_CH_VALUE_MASK) >> LRADC_CH_VALUE_OFFSET; + return val / num_samples; +} + +static unsigned mxs_lradc_read_ts_pressure(struct mxs_lradc *lradc, + unsigned ch1, unsigned ch2) +{ + u32 reg, mask; + unsigned pressure, m1, m2; + + mask = LRADC_CTRL1_LRADC_IRQ(ch1) | LRADC_CTRL1_LRADC_IRQ(ch2); + reg = readl(lradc->base + LRADC_CTRL1) & mask; + + while (reg != mask) { + reg = readl(lradc->base + LRADC_CTRL1) & mask; + dev_dbg(lradc->dev, "One channel is still busy: %X\n", reg); + } + + m1 = mxs_lradc_read_raw_channel(lradc, ch1); + m2 = mxs_lradc_read_raw_channel(lradc, ch2); + + if (m2 == 0) { + dev_warn(lradc->dev, "Cannot calculate pressure\n"); + return 1 << (LRADC_RESOLUTION - 1); + } + + /* simply scale the value from 0 ... max ADC resolution */ + pressure = m1; + pressure *= (1 << LRADC_RESOLUTION); + pressure /= m2; + + dev_dbg(lradc->dev, "Pressure = %u\n", pressure); + return pressure; +} + +#define TS_CH_XP 2 +#define TS_CH_YP 3 +#define TS_CH_XM 4 +#define TS_CH_YM 5 + +/* + * YP(open)--+-------------+ + * | |--+ + * | | | + * YM(-)--+-------------+ | + * +--------------+ + * | | + * XP(weak+) XM(open) + * + * "weak+" means 200k Ohm VDDIO + * (-) means GND + */ +static void mxs_lradc_setup_touch_detection(struct mxs_lradc *lradc) +{ + /* + * In order to detect a touch event the 'touch detect enable' bit + * enables: + * - a weak pullup to the X+ connector + * - a strong ground at the Y- connector + */ + mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); + mxs_lradc_reg_set(lradc, mxs_lradc_touch_detect_bit(lradc), + LRADC_CTRL0); +} + +/* + * YP(meas)--+-------------+ + * | |--+ + * | | | + * YM(open)--+-------------+ | + * +--------------+ + * | | + * XP(+) XM(-) + * + * (+) means here 1.85 V + * (-) means here GND + */ +static void mxs_lradc_prepare_x_pos(struct mxs_lradc *lradc) +{ + mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); + mxs_lradc_reg_set(lradc, mxs_lradc_drive_x_plate(lradc), LRADC_CTRL0); + + lradc->cur_plate = LRADC_SAMPLE_X; + mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YP); + mxs_lradc_setup_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1); +} + +/* + * YP(+)--+-------------+ + * | |--+ + * | | | + * YM(-)--+-------------+ | + * +--------------+ + * | | + * XP(open) XM(meas) + * + * (+) means here 1.85 V + * (-) means here GND + */ +static void mxs_lradc_prepare_y_pos(struct mxs_lradc *lradc) +{ + mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); + mxs_lradc_reg_set(lradc, mxs_lradc_drive_y_plate(lradc), LRADC_CTRL0); + + lradc->cur_plate = LRADC_SAMPLE_Y; + mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_XM); + mxs_lradc_setup_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1); +} + +/* + * YP(+)--+-------------+ + * | |--+ + * | | | + * YM(meas)--+-------------+ | + * +--------------+ + * | | + * XP(meas) XM(-) + * + * (+) means here 1.85 V + * (-) means here GND + */ +static void mxs_lradc_prepare_pressure(struct mxs_lradc *lradc) +{ + mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); + mxs_lradc_reg_set(lradc, mxs_lradc_drive_pressure(lradc), LRADC_CTRL0); + + lradc->cur_plate = LRADC_SAMPLE_PRESSURE; + mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YM); + mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL2, TS_CH_XP); + mxs_lradc_setup_ts_pressure(lradc, TOUCHSCREEN_VCHANNEL2, + TOUCHSCREEN_VCHANNEL1); +} + +static void mxs_lradc_enable_touch_detection(struct mxs_lradc *lradc) +{ + mxs_lradc_setup_touch_detection(lradc); + + lradc->cur_plate = LRADC_TOUCH; + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ | + LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); + mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); +} + +static void mxs_lradc_start_touch_event(struct mxs_lradc *lradc) +{ + mxs_lradc_reg_clear(lradc, + LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, + LRADC_CTRL1); + mxs_lradc_reg_set(lradc, + LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1), + LRADC_CTRL1); + /* + * start with the Y-pos, because it uses nearly the same plate + * settings like the touch detection + */ + mxs_lradc_prepare_y_pos(lradc); +} + +static void mxs_lradc_report_ts_event(struct mxs_lradc *lradc) +{ + input_report_abs(lradc->ts_input, ABS_X, lradc->ts_x_pos); + input_report_abs(lradc->ts_input, ABS_Y, lradc->ts_y_pos); + input_report_abs(lradc->ts_input, ABS_PRESSURE, lradc->ts_pressure); + input_report_key(lradc->ts_input, BTN_TOUCH, 1); + input_sync(lradc->ts_input); +} + +static void mxs_lradc_complete_touch_event(struct mxs_lradc *lradc) +{ + mxs_lradc_setup_touch_detection(lradc); + lradc->cur_plate = LRADC_SAMPLE_VALID; + /* + * start a dummy conversion to burn time to settle the signals + * note: we are not interested in the conversion's value + */ + mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(TOUCHSCREEN_VCHANNEL1)); + mxs_lradc_reg_clear(lradc, + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) | + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2), + LRADC_CTRL1); + mxs_lradc_reg_wrt( + lradc, + LRADC_DELAY_TRIGGER(1 << TOUCHSCREEN_VCHANNEL1) | + LRADC_DELAY_KICK | LRADC_DELAY_DELAY(10), /* waste 5 ms */ + LRADC_DELAY(2)); +} + +/* + * in order to avoid false measurements, report only samples where + * the surface is still touched after the position measurement + */ +static void mxs_lradc_finish_touch_event(struct mxs_lradc *lradc, bool valid) +{ + /* if it is still touched, report the sample */ + if (valid && mxs_lradc_check_touch_event(lradc)) { + lradc->ts_valid = true; + mxs_lradc_report_ts_event(lradc); + } + + /* if it is even still touched, continue with the next measurement */ + if (mxs_lradc_check_touch_event(lradc)) { + mxs_lradc_prepare_y_pos(lradc); + return; + } + + if (lradc->ts_valid) { + /* signal the release */ + lradc->ts_valid = false; + input_report_key(lradc->ts_input, BTN_TOUCH, 0); + input_sync(lradc->ts_input); + } + + /* if it is released, wait for the next touch via IRQ */ + lradc->cur_plate = LRADC_TOUCH; + mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2)); + mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3)); + mxs_lradc_reg_clear(lradc, + LRADC_CTRL1_TOUCH_DETECT_IRQ | + LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) | + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1), + LRADC_CTRL1); + mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); +} + +/* touchscreen's state machine */ +static void mxs_lradc_handle_touch(struct mxs_lradc *lradc) +{ + switch (lradc->cur_plate) { + case LRADC_TOUCH: + if (mxs_lradc_check_touch_event(lradc)) + mxs_lradc_start_touch_event(lradc); + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ, + LRADC_CTRL1); + return; + + case LRADC_SAMPLE_Y: + lradc->ts_y_pos = + mxs_lradc_read_raw_channel(lradc, + TOUCHSCREEN_VCHANNEL1); + mxs_lradc_prepare_x_pos(lradc); + return; + + case LRADC_SAMPLE_X: + lradc->ts_x_pos = + mxs_lradc_read_raw_channel(lradc, + TOUCHSCREEN_VCHANNEL1); + mxs_lradc_prepare_pressure(lradc); + return; + + case LRADC_SAMPLE_PRESSURE: + lradc->ts_pressure = + mxs_lradc_read_ts_pressure(lradc, + TOUCHSCREEN_VCHANNEL2, + TOUCHSCREEN_VCHANNEL1); + mxs_lradc_complete_touch_event(lradc); + return; + + case LRADC_SAMPLE_VALID: + mxs_lradc_finish_touch_event(lradc, 1); + break; + } +} + +/* + * Raw I/O operations + */ +static int mxs_lradc_read_single(struct iio_dev *iio_dev, int chan, int *val) +{ + struct mxs_lradc *lradc = iio_priv(iio_dev); + int ret; + + /* + * See if there is no buffered operation in progress. If there is, simply + * bail out. This can be improved to support both buffered and raw IO at + * the same time, yet the code becomes horribly complicated. Therefore I + * applied KISS principle here. + */ + ret = mutex_trylock(&lradc->lock); + if (!ret) + return -EBUSY; + + reinit_completion(&lradc->completion); + + /* + * No buffered operation in progress, map the channel and trigger it. + * Virtual channel 0 is always used here as the others are always not + * used if doing raw sampling. + */ + if (lradc->soc == IMX28_LRADC) + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), + LRADC_CTRL1); + mxs_lradc_reg_clear(lradc, 0x1, LRADC_CTRL0); + + /* Enable / disable the divider per requirement */ + if (test_bit(chan, &lradc->is_divided)) + mxs_lradc_reg_set(lradc, + 1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, + LRADC_CTRL2); + else + mxs_lradc_reg_clear(lradc, + 1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, + LRADC_CTRL2); + + /* Clean the slot's previous content, then set new one. */ + mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(0), + LRADC_CTRL4); + mxs_lradc_reg_set(lradc, chan, LRADC_CTRL4); + + mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(0)); + + /* Enable the IRQ and start sampling the channel. */ + mxs_lradc_reg_set(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), LRADC_CTRL1); + mxs_lradc_reg_set(lradc, BIT(0), LRADC_CTRL0); + + /* Wait for completion on the channel, 1 second max. */ + ret = wait_for_completion_killable_timeout(&lradc->completion, HZ); + if (!ret) + ret = -ETIMEDOUT; + if (ret < 0) + goto err; + + /* Read the data. */ + *val = readl(lradc->base + LRADC_CH(0)) & LRADC_CH_VALUE_MASK; + ret = IIO_VAL_INT; + +err: + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), LRADC_CTRL1); + + mutex_unlock(&lradc->lock); + + return ret; +} + +static int mxs_lradc_read_temp(struct iio_dev *iio_dev, int *val) +{ + int ret, min, max; + + ret = mxs_lradc_read_single(iio_dev, 8, &min); + if (ret != IIO_VAL_INT) + return ret; + + ret = mxs_lradc_read_single(iio_dev, 9, &max); + if (ret != IIO_VAL_INT) + return ret; + + *val = max - min; + + return IIO_VAL_INT; +} + +static int mxs_lradc_read_raw(struct iio_dev *iio_dev, + const struct iio_chan_spec *chan, + int *val, int *val2, long m) +{ + struct mxs_lradc *lradc = iio_priv(iio_dev); + + switch (m) { + case IIO_CHAN_INFO_RAW: + if (chan->type == IIO_TEMP) + return mxs_lradc_read_temp(iio_dev, val); + + return mxs_lradc_read_single(iio_dev, chan->channel, val); + + case IIO_CHAN_INFO_SCALE: + if (chan->type == IIO_TEMP) { + /* + * From the datasheet, we have to multiply by 1.012 and + * divide by 4 + */ + *val = 0; + *val2 = 253000; + return IIO_VAL_INT_PLUS_MICRO; + } + + *val = lradc->vref_mv[chan->channel]; + *val2 = chan->scan_type.realbits - + test_bit(chan->channel, &lradc->is_divided); + return IIO_VAL_FRACTIONAL_LOG2; + + case IIO_CHAN_INFO_OFFSET: + if (chan->type == IIO_TEMP) { + /* + * The calculated value from the ADC is in Kelvin, we + * want Celsius for hwmon so the offset is -273.15 + * The offset is applied before scaling so it is + * actually -213.15 * 4 / 1.012 = -1079.644268 + */ + *val = -1079; + *val2 = 644268; + + return IIO_VAL_INT_PLUS_MICRO; + } + + return -EINVAL; + + default: + break; + } + + return -EINVAL; +} + +static int mxs_lradc_write_raw(struct iio_dev *iio_dev, + const struct iio_chan_spec *chan, + int val, int val2, long m) +{ + struct mxs_lradc *lradc = iio_priv(iio_dev); + struct mxs_lradc_scale *scale_avail = + lradc->scale_avail[chan->channel]; + int ret; + + ret = mutex_trylock(&lradc->lock); + if (!ret) + return -EBUSY; + + switch (m) { + case IIO_CHAN_INFO_SCALE: + ret = -EINVAL; + if (val == scale_avail[MXS_LRADC_DIV_DISABLED].integer && + val2 == scale_avail[MXS_LRADC_DIV_DISABLED].nano) { + /* divider by two disabled */ + clear_bit(chan->channel, &lradc->is_divided); + ret = 0; + } else if (val == scale_avail[MXS_LRADC_DIV_ENABLED].integer && + val2 == scale_avail[MXS_LRADC_DIV_ENABLED].nano) { + /* divider by two enabled */ + set_bit(chan->channel, &lradc->is_divided); + ret = 0; + } + + break; + default: + ret = -EINVAL; + break; + } + + mutex_unlock(&lradc->lock); + + return ret; +} + +static int mxs_lradc_write_raw_get_fmt(struct iio_dev *iio_dev, + const struct iio_chan_spec *chan, + long m) +{ + return IIO_VAL_INT_PLUS_NANO; +} + +static ssize_t mxs_lradc_show_scale_available_ch(struct device *dev, + struct device_attribute *attr, + char *buf, + int ch) +{ + struct iio_dev *iio = dev_to_iio_dev(dev); + struct mxs_lradc *lradc = iio_priv(iio); + int i, len = 0; + + for (i = 0; i < ARRAY_SIZE(lradc->scale_avail[ch]); i++) + len += sprintf(buf + len, "%u.%09u ", + lradc->scale_avail[ch][i].integer, + lradc->scale_avail[ch][i].nano); + + len += sprintf(buf + len, "\n"); + + return len; +} + +static ssize_t mxs_lradc_show_scale_available(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev_attr *iio_attr = to_iio_dev_attr(attr); + + return mxs_lradc_show_scale_available_ch(dev, attr, buf, + iio_attr->address); +} + +#define SHOW_SCALE_AVAILABLE_ATTR(ch) \ +static IIO_DEVICE_ATTR(in_voltage##ch##_scale_available, S_IRUGO, \ + mxs_lradc_show_scale_available, NULL, ch) + +SHOW_SCALE_AVAILABLE_ATTR(0); +SHOW_SCALE_AVAILABLE_ATTR(1); +SHOW_SCALE_AVAILABLE_ATTR(2); +SHOW_SCALE_AVAILABLE_ATTR(3); +SHOW_SCALE_AVAILABLE_ATTR(4); +SHOW_SCALE_AVAILABLE_ATTR(5); +SHOW_SCALE_AVAILABLE_ATTR(6); +SHOW_SCALE_AVAILABLE_ATTR(7); +SHOW_SCALE_AVAILABLE_ATTR(10); +SHOW_SCALE_AVAILABLE_ATTR(11); +SHOW_SCALE_AVAILABLE_ATTR(12); +SHOW_SCALE_AVAILABLE_ATTR(13); +SHOW_SCALE_AVAILABLE_ATTR(14); +SHOW_SCALE_AVAILABLE_ATTR(15); + +static struct attribute *mxs_lradc_attributes[] = { + &iio_dev_attr_in_voltage0_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage1_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage2_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage3_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage4_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage5_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage6_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage7_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage10_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage11_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage12_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage13_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage14_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage15_scale_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group mxs_lradc_attribute_group = { + .attrs = mxs_lradc_attributes, +}; + +static const struct iio_info mxs_lradc_iio_info = { + .driver_module = THIS_MODULE, + .read_raw = mxs_lradc_read_raw, + .write_raw = mxs_lradc_write_raw, + .write_raw_get_fmt = mxs_lradc_write_raw_get_fmt, + .attrs = &mxs_lradc_attribute_group, +}; + +static int mxs_lradc_ts_open(struct input_dev *dev) +{ + struct mxs_lradc *lradc = input_get_drvdata(dev); + + /* Enable the touch-detect circuitry. */ + mxs_lradc_enable_touch_detection(lradc); + + return 0; +} + +static void mxs_lradc_disable_ts(struct mxs_lradc *lradc) +{ + /* stop all interrupts from firing */ + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN | + LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) | + LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL2), LRADC_CTRL1); + + /* Power-down touchscreen touch-detect circuitry. */ + mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); +} + +static void mxs_lradc_ts_close(struct input_dev *dev) +{ + struct mxs_lradc *lradc = input_get_drvdata(dev); + + mxs_lradc_disable_ts(lradc); +} + +static int mxs_lradc_ts_register(struct mxs_lradc *lradc) +{ + struct input_dev *input; + struct device *dev = lradc->dev; + int ret; + + if (!lradc->use_touchscreen) + return 0; + + input = input_allocate_device(); + if (!input) + return -ENOMEM; + + input->name = DRIVER_NAME; + input->id.bustype = BUS_HOST; + input->dev.parent = dev; + input->open = mxs_lradc_ts_open; + input->close = mxs_lradc_ts_close; + + __set_bit(EV_ABS, input->evbit); + __set_bit(EV_KEY, input->evbit); + __set_bit(BTN_TOUCH, input->keybit); + input_set_abs_params(input, ABS_X, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0); + input_set_abs_params(input, ABS_Y, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0); + input_set_abs_params(input, ABS_PRESSURE, 0, LRADC_SINGLE_SAMPLE_MASK, + 0, 0); + + lradc->ts_input = input; + input_set_drvdata(input, lradc); + ret = input_register_device(input); + if (ret) + input_free_device(lradc->ts_input); + + return ret; +} + +static void mxs_lradc_ts_unregister(struct mxs_lradc *lradc) +{ + if (!lradc->use_touchscreen) + return; + + mxs_lradc_disable_ts(lradc); + input_unregister_device(lradc->ts_input); +} + +/* + * IRQ Handling + */ +static irqreturn_t mxs_lradc_handle_irq(int irq, void *data) +{ + struct iio_dev *iio = data; + struct mxs_lradc *lradc = iio_priv(iio); + unsigned long reg = readl(lradc->base + LRADC_CTRL1); + u32 clr_irq = mxs_lradc_irq_mask(lradc); + const u32 ts_irq_mask = + LRADC_CTRL1_TOUCH_DETECT_IRQ | + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) | + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2); + + if (!(reg & mxs_lradc_irq_mask(lradc))) + return IRQ_NONE; + + if (lradc->use_touchscreen && (reg & ts_irq_mask)) { + mxs_lradc_handle_touch(lradc); + + /* Make sure we don't clear the next conversion's interrupt. */ + clr_irq &= ~(LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) | + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2)); + } + + if (iio_buffer_enabled(iio)) { + if (reg & lradc->buffer_vchans) + iio_trigger_poll(iio->trig); + } else if (reg & LRADC_CTRL1_LRADC_IRQ(0)) { + complete(&lradc->completion); + } + + mxs_lradc_reg_clear(lradc, reg & clr_irq, LRADC_CTRL1); + + return IRQ_HANDLED; +} + +/* + * Trigger handling + */ +static irqreturn_t mxs_lradc_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *iio = pf->indio_dev; + struct mxs_lradc *lradc = iio_priv(iio); + const u32 chan_value = LRADC_CH_ACCUMULATE | + ((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET); + unsigned int i, j = 0; + + for_each_set_bit(i, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) { + lradc->buffer[j] = readl(lradc->base + LRADC_CH(j)); + mxs_lradc_reg_wrt(lradc, chan_value, LRADC_CH(j)); + lradc->buffer[j] &= LRADC_CH_VALUE_MASK; + lradc->buffer[j] /= LRADC_DELAY_TIMER_LOOP; + j++; + } + + iio_push_to_buffers_with_timestamp(iio, lradc->buffer, pf->timestamp); + + iio_trigger_notify_done(iio->trig); + + return IRQ_HANDLED; +} + +static int mxs_lradc_configure_trigger(struct iio_trigger *trig, bool state) +{ + struct iio_dev *iio = iio_trigger_get_drvdata(trig); + struct mxs_lradc *lradc = iio_priv(iio); + const u32 st = state ? STMP_OFFSET_REG_SET : STMP_OFFSET_REG_CLR; + + mxs_lradc_reg_wrt(lradc, LRADC_DELAY_KICK, LRADC_DELAY(0) + st); + + return 0; +} + +static const struct iio_trigger_ops mxs_lradc_trigger_ops = { + .owner = THIS_MODULE, + .set_trigger_state = &mxs_lradc_configure_trigger, +}; + +static int mxs_lradc_trigger_init(struct iio_dev *iio) +{ + int ret; + struct iio_trigger *trig; + struct mxs_lradc *lradc = iio_priv(iio); + + trig = iio_trigger_alloc("%s-dev%i", iio->name, iio->id); + if (!trig) + return -ENOMEM; + + trig->dev.parent = lradc->dev; + iio_trigger_set_drvdata(trig, iio); + trig->ops = &mxs_lradc_trigger_ops; + + ret = iio_trigger_register(trig); + if (ret) { + iio_trigger_free(trig); + return ret; + } + + lradc->trig = trig; + + return 0; +} + +static void mxs_lradc_trigger_remove(struct iio_dev *iio) +{ + struct mxs_lradc *lradc = iio_priv(iio); + + iio_trigger_unregister(lradc->trig); + iio_trigger_free(lradc->trig); +} + +static int mxs_lradc_buffer_preenable(struct iio_dev *iio) +{ + struct mxs_lradc *lradc = iio_priv(iio); + int ret = 0, chan, ofs = 0; + unsigned long enable = 0; + u32 ctrl4_set = 0; + u32 ctrl4_clr = 0; + u32 ctrl1_irq = 0; + const u32 chan_value = LRADC_CH_ACCUMULATE | + ((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET); + const int len = bitmap_weight(iio->active_scan_mask, + LRADC_MAX_TOTAL_CHANS); + + if (!len) + return -EINVAL; + + /* + * Lock the driver so raw access can not be done during buffered + * operation. This simplifies the code a lot. + */ + ret = mutex_trylock(&lradc->lock); + if (!ret) + return -EBUSY; + + lradc->buffer = kmalloc_array(len, sizeof(*lradc->buffer), GFP_KERNEL); + if (!lradc->buffer) { + ret = -ENOMEM; + goto err_mem; + } + + if (lradc->soc == IMX28_LRADC) + mxs_lradc_reg_clear( + lradc, + lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET, + LRADC_CTRL1); + mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0); + + for_each_set_bit(chan, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) { + ctrl4_set |= chan << LRADC_CTRL4_LRADCSELECT_OFFSET(ofs); + ctrl4_clr |= LRADC_CTRL4_LRADCSELECT_MASK(ofs); + ctrl1_irq |= LRADC_CTRL1_LRADC_IRQ_EN(ofs); + mxs_lradc_reg_wrt(lradc, chan_value, LRADC_CH(ofs)); + bitmap_set(&enable, ofs, 1); + ofs++; + } + + mxs_lradc_reg_clear(lradc, LRADC_DELAY_TRIGGER_LRADCS_MASK | + LRADC_DELAY_KICK, LRADC_DELAY(0)); + mxs_lradc_reg_clear(lradc, ctrl4_clr, LRADC_CTRL4); + mxs_lradc_reg_set(lradc, ctrl4_set, LRADC_CTRL4); + mxs_lradc_reg_set(lradc, ctrl1_irq, LRADC_CTRL1); + mxs_lradc_reg_set(lradc, enable << LRADC_DELAY_TRIGGER_LRADCS_OFFSET, + LRADC_DELAY(0)); + + return 0; + +err_mem: + mutex_unlock(&lradc->lock); + return ret; +} + +static int mxs_lradc_buffer_postdisable(struct iio_dev *iio) +{ + struct mxs_lradc *lradc = iio_priv(iio); + + mxs_lradc_reg_clear(lradc, LRADC_DELAY_TRIGGER_LRADCS_MASK | + LRADC_DELAY_KICK, LRADC_DELAY(0)); + + mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0); + if (lradc->soc == IMX28_LRADC) + mxs_lradc_reg_clear( + lradc, + lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET, + LRADC_CTRL1); + + kfree(lradc->buffer); + mutex_unlock(&lradc->lock); + + return 0; +} + +static bool mxs_lradc_validate_scan_mask(struct iio_dev *iio, + const unsigned long *mask) +{ + struct mxs_lradc *lradc = iio_priv(iio); + const int map_chans = bitmap_weight(mask, LRADC_MAX_TOTAL_CHANS); + int rsvd_chans = 0; + unsigned long rsvd_mask = 0; + + if (lradc->use_touchbutton) + rsvd_mask |= CHAN_MASK_TOUCHBUTTON; + if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_4WIRE) + rsvd_mask |= CHAN_MASK_TOUCHSCREEN_4WIRE; + if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE) + rsvd_mask |= CHAN_MASK_TOUCHSCREEN_5WIRE; + + if (lradc->use_touchbutton) + rsvd_chans++; + if (lradc->use_touchscreen) + rsvd_chans += 2; + + /* Test for attempts to map channels with special mode of operation. */ + if (bitmap_intersects(mask, &rsvd_mask, LRADC_MAX_TOTAL_CHANS)) + return false; + + /* Test for attempts to map more channels then available slots. */ + if (map_chans + rsvd_chans > LRADC_MAX_MAPPED_CHANS) + return false; + + return true; +} + +static const struct iio_buffer_setup_ops mxs_lradc_buffer_ops = { + .preenable = &mxs_lradc_buffer_preenable, + .postenable = &iio_triggered_buffer_postenable, + .predisable = &iio_triggered_buffer_predisable, + .postdisable = &mxs_lradc_buffer_postdisable, + .validate_scan_mask = &mxs_lradc_validate_scan_mask, +}; + +/* + * Driver initialization + */ + +#define MXS_ADC_CHAN(idx, chan_type, name) { \ + .type = (chan_type), \ + .indexed = 1, \ + .scan_index = (idx), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .channel = (idx), \ + .address = (idx), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = LRADC_RESOLUTION, \ + .storagebits = 32, \ + }, \ + .datasheet_name = (name), \ +} + +static const struct iio_chan_spec mx23_lradc_chan_spec[] = { + MXS_ADC_CHAN(0, IIO_VOLTAGE, "LRADC0"), + MXS_ADC_CHAN(1, IIO_VOLTAGE, "LRADC1"), + MXS_ADC_CHAN(2, IIO_VOLTAGE, "LRADC2"), + MXS_ADC_CHAN(3, IIO_VOLTAGE, "LRADC3"), + MXS_ADC_CHAN(4, IIO_VOLTAGE, "LRADC4"), + MXS_ADC_CHAN(5, IIO_VOLTAGE, "LRADC5"), + MXS_ADC_CHAN(6, IIO_VOLTAGE, "VDDIO"), + MXS_ADC_CHAN(7, IIO_VOLTAGE, "VBATT"), + /* Combined Temperature sensors */ + { + .type = IIO_TEMP, + .indexed = 1, + .scan_index = 8, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE), + .channel = 8, + .scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,}, + .datasheet_name = "TEMP_DIE", + }, + /* Hidden channel to keep indexes */ + { + .type = IIO_TEMP, + .indexed = 1, + .scan_index = -1, + .channel = 9, + }, + MXS_ADC_CHAN(10, IIO_VOLTAGE, NULL), + MXS_ADC_CHAN(11, IIO_VOLTAGE, NULL), + MXS_ADC_CHAN(12, IIO_VOLTAGE, "USB_DP"), + MXS_ADC_CHAN(13, IIO_VOLTAGE, "USB_DN"), + MXS_ADC_CHAN(14, IIO_VOLTAGE, "VBG"), + MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"), +}; + +static const struct iio_chan_spec mx28_lradc_chan_spec[] = { + MXS_ADC_CHAN(0, IIO_VOLTAGE, "LRADC0"), + MXS_ADC_CHAN(1, IIO_VOLTAGE, "LRADC1"), + MXS_ADC_CHAN(2, IIO_VOLTAGE, "LRADC2"), + MXS_ADC_CHAN(3, IIO_VOLTAGE, "LRADC3"), + MXS_ADC_CHAN(4, IIO_VOLTAGE, "LRADC4"), + MXS_ADC_CHAN(5, IIO_VOLTAGE, "LRADC5"), + MXS_ADC_CHAN(6, IIO_VOLTAGE, "LRADC6"), + MXS_ADC_CHAN(7, IIO_VOLTAGE, "VBATT"), + /* Combined Temperature sensors */ + { + .type = IIO_TEMP, + .indexed = 1, + .scan_index = 8, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE), + .channel = 8, + .scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,}, + .datasheet_name = "TEMP_DIE", + }, + /* Hidden channel to keep indexes */ + { + .type = IIO_TEMP, + .indexed = 1, + .scan_index = -1, + .channel = 9, + }, + MXS_ADC_CHAN(10, IIO_VOLTAGE, "VDDIO"), + MXS_ADC_CHAN(11, IIO_VOLTAGE, "VTH"), + MXS_ADC_CHAN(12, IIO_VOLTAGE, "VDDA"), + MXS_ADC_CHAN(13, IIO_VOLTAGE, "VDDD"), + MXS_ADC_CHAN(14, IIO_VOLTAGE, "VBG"), + MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"), +}; + +static int mxs_lradc_hw_init(struct mxs_lradc *lradc) +{ + /* The ADC always uses DELAY CHANNEL 0. */ + const u32 adc_cfg = + (1 << (LRADC_DELAY_TRIGGER_DELAYS_OFFSET + 0)) | + (LRADC_DELAY_TIMER_PER << LRADC_DELAY_DELAY_OFFSET); + + int ret = stmp_reset_block(lradc->base); + + if (ret) + return ret; + + /* Configure DELAY CHANNEL 0 for generic ADC sampling. */ + mxs_lradc_reg_wrt(lradc, adc_cfg, LRADC_DELAY(0)); + + /* Disable remaining DELAY CHANNELs */ + mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(1)); + mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2)); + mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3)); + + /* Configure the touchscreen type */ + if (lradc->soc == IMX28_LRADC) { + mxs_lradc_reg_clear(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE, + LRADC_CTRL0); + + if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE) + mxs_lradc_reg_set(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE, + LRADC_CTRL0); + } + + /* Start internal temperature sensing. */ + mxs_lradc_reg_wrt(lradc, 0, LRADC_CTRL2); + + return 0; +} + +static void mxs_lradc_hw_stop(struct mxs_lradc *lradc) +{ + int i; + + mxs_lradc_reg_clear(lradc, mxs_lradc_irq_en_mask(lradc), LRADC_CTRL1); + + for (i = 0; i < LRADC_MAX_DELAY_CHANS; i++) + mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(i)); +} + +static const struct of_device_id mxs_lradc_dt_ids[] = { + { .compatible = "fsl,imx23-lradc", .data = (void *)IMX23_LRADC, }, + { .compatible = "fsl,imx28-lradc", .data = (void *)IMX28_LRADC, }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_lradc_dt_ids); + +static int mxs_lradc_probe_touchscreen(struct mxs_lradc *lradc, + struct device_node *lradc_node) +{ + int ret; + u32 ts_wires = 0, adapt; + + ret = of_property_read_u32(lradc_node, "fsl,lradc-touchscreen-wires", + &ts_wires); + if (ret) + return -ENODEV; /* touchscreen feature disabled */ + + switch (ts_wires) { + case 4: + lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_4WIRE; + break; + case 5: + if (lradc->soc == IMX28_LRADC) { + lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_5WIRE; + break; + } + /* fall through an error message for i.MX23 */ + default: + dev_err(lradc->dev, + "Unsupported number of touchscreen wires (%d)\n", + ts_wires); + return -EINVAL; + } + + if (of_property_read_u32(lradc_node, "fsl,ave-ctrl", &adapt)) { + lradc->over_sample_cnt = 4; + } else { + if (adapt < 1 || adapt > 32) { + dev_err(lradc->dev, "Invalid sample count (%u)\n", + adapt); + return -EINVAL; + } + lradc->over_sample_cnt = adapt; + } + + if (of_property_read_u32(lradc_node, "fsl,ave-delay", &adapt)) { + lradc->over_sample_delay = 2; + } else { + if (adapt < 2 || adapt > LRADC_DELAY_DELAY_MASK + 1) { + dev_err(lradc->dev, "Invalid sample delay (%u)\n", + adapt); + return -EINVAL; + } + lradc->over_sample_delay = adapt; + } + + if (of_property_read_u32(lradc_node, "fsl,settling", &adapt)) { + lradc->settling_delay = 10; + } else { + if (adapt < 1 || adapt > LRADC_DELAY_DELAY_MASK) { + dev_err(lradc->dev, "Invalid settling delay (%u)\n", + adapt); + return -EINVAL; + } + lradc->settling_delay = adapt; + } + + return 0; +} + +static int mxs_lradc_probe(struct platform_device *pdev) +{ + const struct of_device_id *of_id = + of_match_device(mxs_lradc_dt_ids, &pdev->dev); + const struct mxs_lradc_of_config *of_cfg = + &mxs_lradc_of_config[(enum mxs_lradc_id)of_id->data]; + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct mxs_lradc *lradc; + struct iio_dev *iio; + struct resource *iores; + int ret = 0, touch_ret; + int i, s; + u64 scale_uv; + + /* Allocate the IIO device. */ + iio = devm_iio_device_alloc(dev, sizeof(*lradc)); + if (!iio) { + dev_err(dev, "Failed to allocate IIO device\n"); + return -ENOMEM; + } + + lradc = iio_priv(iio); + lradc->soc = (enum mxs_lradc_id)of_id->data; + + /* Grab the memory area */ + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); + lradc->dev = &pdev->dev; + lradc->base = devm_ioremap_resource(dev, iores); + if (IS_ERR(lradc->base)) + return PTR_ERR(lradc->base); + + lradc->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(lradc->clk)) { + dev_err(dev, "Failed to get the delay unit clock\n"); + return PTR_ERR(lradc->clk); + } + ret = clk_prepare_enable(lradc->clk); + if (ret != 0) { + dev_err(dev, "Failed to enable the delay unit clock\n"); + return ret; + } + + touch_ret = mxs_lradc_probe_touchscreen(lradc, node); + + if (touch_ret == 0) + lradc->buffer_vchans = BUFFER_VCHANS_LIMITED; + else + lradc->buffer_vchans = BUFFER_VCHANS_ALL; + + /* Grab all IRQ sources */ + for (i = 0; i < of_cfg->irq_count; i++) { + lradc->irq[i] = platform_get_irq(pdev, i); + if (lradc->irq[i] < 0) { + ret = lradc->irq[i]; + goto err_clk; + } + + ret = devm_request_irq(dev, lradc->irq[i], + mxs_lradc_handle_irq, 0, + of_cfg->irq_name[i], iio); + if (ret) + goto err_clk; + } + + lradc->vref_mv = of_cfg->vref_mv; + + platform_set_drvdata(pdev, iio); + + init_completion(&lradc->completion); + mutex_init(&lradc->lock); + + iio->name = pdev->name; + iio->dev.parent = &pdev->dev; + iio->info = &mxs_lradc_iio_info; + iio->modes = INDIO_DIRECT_MODE; + iio->masklength = LRADC_MAX_TOTAL_CHANS; + + if (lradc->soc == IMX23_LRADC) { + iio->channels = mx23_lradc_chan_spec; + iio->num_channels = ARRAY_SIZE(mx23_lradc_chan_spec); + } else { + iio->channels = mx28_lradc_chan_spec; + iio->num_channels = ARRAY_SIZE(mx28_lradc_chan_spec); + } + + ret = iio_triggered_buffer_setup(iio, &iio_pollfunc_store_time, + &mxs_lradc_trigger_handler, + &mxs_lradc_buffer_ops); + if (ret) + goto err_clk; + + ret = mxs_lradc_trigger_init(iio); + if (ret) + goto err_trig; + + /* Populate available ADC input ranges */ + for (i = 0; i < LRADC_MAX_TOTAL_CHANS; i++) { + for (s = 0; s < ARRAY_SIZE(lradc->scale_avail[i]); s++) { + /* + * [s=0] = optional divider by two disabled (default) + * [s=1] = optional divider by two enabled + * + * The scale is calculated by doing: + * Vref >> (realbits - s) + * which multiplies by two on the second component + * of the array. + */ + scale_uv = ((u64)lradc->vref_mv[i] * 100000000) >> + (LRADC_RESOLUTION - s); + lradc->scale_avail[i][s].nano = + do_div(scale_uv, 100000000) * 10; + lradc->scale_avail[i][s].integer = scale_uv; + } + } + + /* Configure the hardware. */ + ret = mxs_lradc_hw_init(lradc); + if (ret) + goto err_dev; + + /* Register the touchscreen input device. */ + if (touch_ret == 0) { + ret = mxs_lradc_ts_register(lradc); + if (ret) + goto err_ts_register; + } + + /* Register IIO device. */ + ret = iio_device_register(iio); + if (ret) { + dev_err(dev, "Failed to register IIO device\n"); + goto err_ts; + } + + return 0; + +err_ts: + mxs_lradc_ts_unregister(lradc); +err_ts_register: + mxs_lradc_hw_stop(lradc); +err_dev: + mxs_lradc_trigger_remove(iio); +err_trig: + iio_triggered_buffer_cleanup(iio); +err_clk: + clk_disable_unprepare(lradc->clk); + return ret; +} + +static int mxs_lradc_remove(struct platform_device *pdev) +{ + struct iio_dev *iio = platform_get_drvdata(pdev); + struct mxs_lradc *lradc = iio_priv(iio); + + iio_device_unregister(iio); + mxs_lradc_ts_unregister(lradc); + mxs_lradc_hw_stop(lradc); + mxs_lradc_trigger_remove(iio); + iio_triggered_buffer_cleanup(iio); + + clk_disable_unprepare(lradc->clk); + + return 0; +} + +static struct platform_driver mxs_lradc_driver = { + .driver = { + .name = DRIVER_NAME, + .of_match_table = mxs_lradc_dt_ids, + }, + .probe = mxs_lradc_probe, + .remove = mxs_lradc_remove, +}; + +module_platform_driver(mxs_lradc_driver); + +MODULE_AUTHOR("Marek Vasut <marex@denx.de>"); +MODULE_DESCRIPTION("Freescale MXS LRADC driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/iio/adc/palmas_gpadc.c b/drivers/iio/adc/palmas_gpadc.c index f42eb8a7d21f..2bbf0c521beb 100644 --- a/drivers/iio/adc/palmas_gpadc.c +++ b/drivers/iio/adc/palmas_gpadc.c @@ -534,7 +534,7 @@ static int palmas_gpadc_probe(struct platform_device *pdev) } ret = request_threaded_irq(adc->irq, NULL, palmas_gpadc_irq, - IRQF_ONESHOT | IRQF_EARLY_RESUME, dev_name(adc->dev), + IRQF_ONESHOT, dev_name(adc->dev), adc); if (ret < 0) { dev_err(adc->dev, @@ -549,7 +549,7 @@ static int palmas_gpadc_probe(struct platform_device *pdev) adc->irq_auto_0 = platform_get_irq(pdev, 1); ret = request_threaded_irq(adc->irq_auto_0, NULL, palmas_gpadc_irq_auto, - IRQF_ONESHOT | IRQF_EARLY_RESUME, + IRQF_ONESHOT, "palmas-adc-auto-0", adc); if (ret < 0) { dev_err(adc->dev, "request auto0 irq %d failed: %d\n", @@ -565,7 +565,7 @@ static int palmas_gpadc_probe(struct platform_device *pdev) adc->irq_auto_1 = platform_get_irq(pdev, 2); ret = request_threaded_irq(adc->irq_auto_1, NULL, palmas_gpadc_irq_auto, - IRQF_ONESHOT | IRQF_EARLY_RESUME, + IRQF_ONESHOT, "palmas-adc-auto-1", adc); if (ret < 0) { dev_err(adc->dev, "request auto1 irq %d failed: %d\n", diff --git a/drivers/iio/adc/ti-adc081c.c b/drivers/iio/adc/ti-adc081c.c index 2c8374f86252..ecbc12138d58 100644 --- a/drivers/iio/adc/ti-adc081c.c +++ b/drivers/iio/adc/ti-adc081c.c @@ -73,7 +73,7 @@ static int adc081c_probe(struct i2c_client *client, int err; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) - return -ENODEV; + return -EOPNOTSUPP; iio = devm_iio_device_alloc(&client->dev, sizeof(*adc)); if (!iio) diff --git a/drivers/iio/adc/ti-adc0832.c b/drivers/iio/adc/ti-adc0832.c new file mode 100644 index 000000000000..0afeac0c9bad --- /dev/null +++ b/drivers/iio/adc/ti-adc0832.c @@ -0,0 +1,288 @@ +/* + * ADC0831/ADC0832/ADC0834/ADC0838 8-bit ADC driver + * + * Copyright (c) 2016 Akinobu Mita <akinobu.mita@gmail.com> + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * Datasheet: http://www.ti.com/lit/ds/symlink/adc0832-n.pdf + */ + +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/iio/iio.h> +#include <linux/regulator/consumer.h> + +enum { + adc0831, + adc0832, + adc0834, + adc0838, +}; + +struct adc0832 { + struct spi_device *spi; + struct regulator *reg; + struct mutex lock; + u8 mux_bits; + + u8 tx_buf[2] ____cacheline_aligned; + u8 rx_buf[2]; +}; + +#define ADC0832_VOLTAGE_CHANNEL(chan) \ + { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = chan, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ + } + +#define ADC0832_VOLTAGE_CHANNEL_DIFF(chan1, chan2) \ + { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = (chan1), \ + .channel2 = (chan2), \ + .differential = 1, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ + } + +static const struct iio_chan_spec adc0831_channels[] = { + ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1), +}; + +static const struct iio_chan_spec adc0832_channels[] = { + ADC0832_VOLTAGE_CHANNEL(0), + ADC0832_VOLTAGE_CHANNEL(1), + ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1), + ADC0832_VOLTAGE_CHANNEL_DIFF(1, 0), +}; + +static const struct iio_chan_spec adc0834_channels[] = { + ADC0832_VOLTAGE_CHANNEL(0), + ADC0832_VOLTAGE_CHANNEL(1), + ADC0832_VOLTAGE_CHANNEL(2), + ADC0832_VOLTAGE_CHANNEL(3), + ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1), + ADC0832_VOLTAGE_CHANNEL_DIFF(1, 0), + ADC0832_VOLTAGE_CHANNEL_DIFF(2, 3), + ADC0832_VOLTAGE_CHANNEL_DIFF(3, 2), +}; + +static const struct iio_chan_spec adc0838_channels[] = { + ADC0832_VOLTAGE_CHANNEL(0), + ADC0832_VOLTAGE_CHANNEL(1), + ADC0832_VOLTAGE_CHANNEL(2), + ADC0832_VOLTAGE_CHANNEL(3), + ADC0832_VOLTAGE_CHANNEL(4), + ADC0832_VOLTAGE_CHANNEL(5), + ADC0832_VOLTAGE_CHANNEL(6), + ADC0832_VOLTAGE_CHANNEL(7), + ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1), + ADC0832_VOLTAGE_CHANNEL_DIFF(1, 0), + ADC0832_VOLTAGE_CHANNEL_DIFF(2, 3), + ADC0832_VOLTAGE_CHANNEL_DIFF(3, 2), + ADC0832_VOLTAGE_CHANNEL_DIFF(4, 5), + ADC0832_VOLTAGE_CHANNEL_DIFF(5, 4), + ADC0832_VOLTAGE_CHANNEL_DIFF(6, 7), + ADC0832_VOLTAGE_CHANNEL_DIFF(7, 6), +}; + +static int adc0831_adc_conversion(struct adc0832 *adc) +{ + struct spi_device *spi = adc->spi; + int ret; + + ret = spi_read(spi, &adc->rx_buf, 2); + if (ret) + return ret; + + /* + * Skip TRI-STATE and a leading zero + */ + return (adc->rx_buf[0] << 2 & 0xff) | (adc->rx_buf[1] >> 6); +} + +static int adc0832_adc_conversion(struct adc0832 *adc, int channel, + bool differential) +{ + struct spi_device *spi = adc->spi; + struct spi_transfer xfer = { + .tx_buf = adc->tx_buf, + .rx_buf = adc->rx_buf, + .len = 2, + }; + int ret; + + if (!adc->mux_bits) + return adc0831_adc_conversion(adc); + + /* start bit */ + adc->tx_buf[0] = 1 << (adc->mux_bits + 1); + /* single-ended or differential */ + adc->tx_buf[0] |= differential ? 0 : (1 << adc->mux_bits); + /* odd / sign */ + adc->tx_buf[0] |= (channel % 2) << (adc->mux_bits - 1); + /* select */ + if (adc->mux_bits > 1) + adc->tx_buf[0] |= channel / 2; + + /* align Data output BIT7 (MSB) to 8-bit boundary */ + adc->tx_buf[0] <<= 1; + + ret = spi_sync_transfer(spi, &xfer, 1); + if (ret) + return ret; + + return adc->rx_buf[1]; +} + +static int adc0832_read_raw(struct iio_dev *iio, + struct iio_chan_spec const *channel, int *value, + int *shift, long mask) +{ + struct adc0832 *adc = iio_priv(iio); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&adc->lock); + *value = adc0832_adc_conversion(adc, channel->channel, + channel->differential); + mutex_unlock(&adc->lock); + if (*value < 0) + return *value; + + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *value = regulator_get_voltage(adc->reg); + if (*value < 0) + return *value; + + /* convert regulator output voltage to mV */ + *value /= 1000; + *shift = 8; + + return IIO_VAL_FRACTIONAL_LOG2; + } + + return -EINVAL; +} + +static const struct iio_info adc0832_info = { + .read_raw = adc0832_read_raw, + .driver_module = THIS_MODULE, +}; + +static int adc0832_probe(struct spi_device *spi) +{ + struct iio_dev *indio_dev; + struct adc0832 *adc; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc)); + if (!indio_dev) + return -ENOMEM; + + adc = iio_priv(indio_dev); + adc->spi = spi; + mutex_init(&adc->lock); + + indio_dev->name = spi_get_device_id(spi)->name; + indio_dev->dev.parent = &spi->dev; + indio_dev->info = &adc0832_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + switch (spi_get_device_id(spi)->driver_data) { + case adc0831: + adc->mux_bits = 0; + indio_dev->channels = adc0831_channels; + indio_dev->num_channels = ARRAY_SIZE(adc0831_channels); + break; + case adc0832: + adc->mux_bits = 1; + indio_dev->channels = adc0832_channels; + indio_dev->num_channels = ARRAY_SIZE(adc0832_channels); + break; + case adc0834: + adc->mux_bits = 2; + indio_dev->channels = adc0834_channels; + indio_dev->num_channels = ARRAY_SIZE(adc0834_channels); + break; + case adc0838: + adc->mux_bits = 3; + indio_dev->channels = adc0838_channels; + indio_dev->num_channels = ARRAY_SIZE(adc0838_channels); + break; + default: + return -EINVAL; + } + + adc->reg = devm_regulator_get(&spi->dev, "vref"); + if (IS_ERR(adc->reg)) + return PTR_ERR(adc->reg); + + ret = regulator_enable(adc->reg); + if (ret) + return ret; + + spi_set_drvdata(spi, indio_dev); + + ret = iio_device_register(indio_dev); + if (ret) + regulator_disable(adc->reg); + + return ret; +} + +static int adc0832_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = spi_get_drvdata(spi); + struct adc0832 *adc = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + regulator_disable(adc->reg); + + return 0; +} + +#ifdef CONFIG_OF + +static const struct of_device_id adc0832_dt_ids[] = { + { .compatible = "ti,adc0831", }, + { .compatible = "ti,adc0832", }, + { .compatible = "ti,adc0834", }, + { .compatible = "ti,adc0838", }, + {} +}; +MODULE_DEVICE_TABLE(of, adc0832_dt_ids); + +#endif + +static const struct spi_device_id adc0832_id[] = { + { "adc0831", adc0831 }, + { "adc0832", adc0832 }, + { "adc0834", adc0834 }, + { "adc0838", adc0838 }, + {} +}; +MODULE_DEVICE_TABLE(spi, adc0832_id); + +static struct spi_driver adc0832_driver = { + .driver = { + .name = "adc0832", + .of_match_table = of_match_ptr(adc0832_dt_ids), + }, + .probe = adc0832_probe, + .remove = adc0832_remove, + .id_table = adc0832_id, +}; +module_spi_driver(adc0832_driver); + +MODULE_AUTHOR("Akinobu Mita <akinobu.mita@gmail.com>"); +MODULE_DESCRIPTION("ADC0831/ADC0832/ADC0834/ADC0838 driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c new file mode 100644 index 000000000000..73cbf0b54e54 --- /dev/null +++ b/drivers/iio/adc/ti-ads1015.c @@ -0,0 +1,612 @@ +/* + * ADS1015 - Texas Instruments Analog-to-Digital Converter + * + * Copyright (c) 2016, Intel Corporation. + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * IIO driver for ADS1015 ADC 7-bit I2C slave address: + * * 0x48 - ADDR connected to Ground + * * 0x49 - ADDR connected to Vdd + * * 0x4A - ADDR connected to SDA + * * 0x4B - ADDR connected to SCL + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/pm_runtime.h> +#include <linux/mutex.h> +#include <linux/delay.h> + +#include <linux/i2c/ads1015.h> + +#include <linux/iio/iio.h> +#include <linux/iio/types.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/trigger_consumer.h> + +#define ADS1015_DRV_NAME "ads1015" + +#define ADS1015_CONV_REG 0x00 +#define ADS1015_CFG_REG 0x01 + +#define ADS1015_CFG_DR_SHIFT 5 +#define ADS1015_CFG_MOD_SHIFT 8 +#define ADS1015_CFG_PGA_SHIFT 9 +#define ADS1015_CFG_MUX_SHIFT 12 + +#define ADS1015_CFG_DR_MASK GENMASK(7, 5) +#define ADS1015_CFG_MOD_MASK BIT(8) +#define ADS1015_CFG_PGA_MASK GENMASK(11, 9) +#define ADS1015_CFG_MUX_MASK GENMASK(14, 12) + +/* device operating modes */ +#define ADS1015_CONTINUOUS 0 +#define ADS1015_SINGLESHOT 1 + +#define ADS1015_SLEEP_DELAY_MS 2000 +#define ADS1015_DEFAULT_PGA 2 +#define ADS1015_DEFAULT_DATA_RATE 4 +#define ADS1015_DEFAULT_CHAN 0 + +enum ads1015_channels { + ADS1015_AIN0_AIN1 = 0, + ADS1015_AIN0_AIN3, + ADS1015_AIN1_AIN3, + ADS1015_AIN2_AIN3, + ADS1015_AIN0, + ADS1015_AIN1, + ADS1015_AIN2, + ADS1015_AIN3, + ADS1015_TIMESTAMP, +}; + +static const unsigned int ads1015_data_rate[] = { + 128, 250, 490, 920, 1600, 2400, 3300, 3300 +}; + +static const struct { + int scale; + int uscale; +} ads1015_scale[] = { + {3, 0}, + {2, 0}, + {1, 0}, + {0, 500000}, + {0, 250000}, + {0, 125000}, + {0, 125000}, + {0, 125000}, +}; + +#define ADS1015_V_CHAN(_chan, _addr) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .address = _addr, \ + .channel = _chan, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = _addr, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 12, \ + .storagebits = 16, \ + .shift = 4, \ + .endianness = IIO_CPU, \ + }, \ +} + +#define ADS1015_V_DIFF_CHAN(_chan, _chan2, _addr) { \ + .type = IIO_VOLTAGE, \ + .differential = 1, \ + .indexed = 1, \ + .address = _addr, \ + .channel = _chan, \ + .channel2 = _chan2, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = _addr, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 12, \ + .storagebits = 16, \ + .shift = 4, \ + .endianness = IIO_CPU, \ + }, \ +} + +struct ads1015_data { + struct regmap *regmap; + /* + * Protects ADC ops, e.g: concurrent sysfs/buffered + * data reads, configuration updates + */ + struct mutex lock; + struct ads1015_channel_data channel_data[ADS1015_CHANNELS]; +}; + +static bool ads1015_is_writeable_reg(struct device *dev, unsigned int reg) +{ + return (reg == ADS1015_CFG_REG); +} + +static const struct regmap_config ads1015_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .max_register = ADS1015_CFG_REG, + .writeable_reg = ads1015_is_writeable_reg, +}; + +static const struct iio_chan_spec ads1015_channels[] = { + ADS1015_V_DIFF_CHAN(0, 1, ADS1015_AIN0_AIN1), + ADS1015_V_DIFF_CHAN(0, 3, ADS1015_AIN0_AIN3), + ADS1015_V_DIFF_CHAN(1, 3, ADS1015_AIN1_AIN3), + ADS1015_V_DIFF_CHAN(2, 3, ADS1015_AIN2_AIN3), + ADS1015_V_CHAN(0, ADS1015_AIN0), + ADS1015_V_CHAN(1, ADS1015_AIN1), + ADS1015_V_CHAN(2, ADS1015_AIN2), + ADS1015_V_CHAN(3, ADS1015_AIN3), + IIO_CHAN_SOFT_TIMESTAMP(ADS1015_TIMESTAMP), +}; + +static int ads1015_set_power_state(struct ads1015_data *data, bool on) +{ + int ret; + struct device *dev = regmap_get_device(data->regmap); + + if (on) { + ret = pm_runtime_get_sync(dev); + if (ret < 0) + pm_runtime_put_noidle(dev); + } else { + pm_runtime_mark_last_busy(dev); + ret = pm_runtime_put_autosuspend(dev); + } + + return ret; +} + +static +int ads1015_get_adc_result(struct ads1015_data *data, int chan, int *val) +{ + int ret, pga, dr, conv_time; + bool change; + + if (chan < 0 || chan >= ADS1015_CHANNELS) + return -EINVAL; + + pga = data->channel_data[chan].pga; + dr = data->channel_data[chan].data_rate; + + ret = regmap_update_bits_check(data->regmap, ADS1015_CFG_REG, + ADS1015_CFG_MUX_MASK | + ADS1015_CFG_PGA_MASK, + chan << ADS1015_CFG_MUX_SHIFT | + pga << ADS1015_CFG_PGA_SHIFT, + &change); + if (ret < 0) + return ret; + + if (change) { + conv_time = DIV_ROUND_UP(USEC_PER_SEC, ads1015_data_rate[dr]); + usleep_range(conv_time, conv_time + 1); + } + + return regmap_read(data->regmap, ADS1015_CONV_REG, val); +} + +static irqreturn_t ads1015_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct ads1015_data *data = iio_priv(indio_dev); + s16 buf[8]; /* 1x s16 ADC val + 3x s16 padding + 4x s16 timestamp */ + int chan, ret, res; + + memset(buf, 0, sizeof(buf)); + + mutex_lock(&data->lock); + chan = find_first_bit(indio_dev->active_scan_mask, + indio_dev->masklength); + ret = ads1015_get_adc_result(data, chan, &res); + if (ret < 0) { + mutex_unlock(&data->lock); + goto err; + } + + buf[0] = res; + mutex_unlock(&data->lock); + + iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns()); + +err: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int ads1015_set_scale(struct ads1015_data *data, int chan, + int scale, int uscale) +{ + int i, ret, rindex = -1; + + for (i = 0; i < ARRAY_SIZE(ads1015_scale); i++) + if (ads1015_scale[i].scale == scale && + ads1015_scale[i].uscale == uscale) { + rindex = i; + break; + } + if (rindex < 0) + return -EINVAL; + + ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG, + ADS1015_CFG_PGA_MASK, + rindex << ADS1015_CFG_PGA_SHIFT); + if (ret < 0) + return ret; + + data->channel_data[chan].pga = rindex; + + return 0; +} + +static int ads1015_set_data_rate(struct ads1015_data *data, int chan, int rate) +{ + int i, ret, rindex = -1; + + for (i = 0; i < ARRAY_SIZE(ads1015_data_rate); i++) + if (ads1015_data_rate[i] == rate) { + rindex = i; + break; + } + if (rindex < 0) + return -EINVAL; + + ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG, + ADS1015_CFG_DR_MASK, + rindex << ADS1015_CFG_DR_SHIFT); + if (ret < 0) + return ret; + + data->channel_data[chan].data_rate = rindex; + + return 0; +} + +static int ads1015_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + int ret, idx; + struct ads1015_data *data = iio_priv(indio_dev); + + mutex_lock(&indio_dev->mlock); + mutex_lock(&data->lock); + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (iio_buffer_enabled(indio_dev)) { + ret = -EBUSY; + break; + } + + ret = ads1015_set_power_state(data, true); + if (ret < 0) + break; + + ret = ads1015_get_adc_result(data, chan->address, val); + if (ret < 0) { + ads1015_set_power_state(data, false); + break; + } + + /* 12 bit res, D0 is bit 4 in conversion register */ + *val = sign_extend32(*val >> 4, 11); + + ret = ads1015_set_power_state(data, false); + if (ret < 0) + break; + + ret = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_SCALE: + idx = data->channel_data[chan->address].pga; + *val = ads1015_scale[idx].scale; + *val2 = ads1015_scale[idx].uscale; + ret = IIO_VAL_INT_PLUS_MICRO; + break; + case IIO_CHAN_INFO_SAMP_FREQ: + idx = data->channel_data[chan->address].data_rate; + *val = ads1015_data_rate[idx]; + ret = IIO_VAL_INT; + break; + default: + ret = -EINVAL; + break; + } + mutex_unlock(&data->lock); + mutex_unlock(&indio_dev->mlock); + + return ret; +} + +static int ads1015_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct ads1015_data *data = iio_priv(indio_dev); + int ret; + + mutex_lock(&data->lock); + switch (mask) { + case IIO_CHAN_INFO_SCALE: + ret = ads1015_set_scale(data, chan->address, val, val2); + break; + case IIO_CHAN_INFO_SAMP_FREQ: + ret = ads1015_set_data_rate(data, chan->address, val); + break; + default: + ret = -EINVAL; + break; + } + mutex_unlock(&data->lock); + + return ret; +} + +static int ads1015_buffer_preenable(struct iio_dev *indio_dev) +{ + return ads1015_set_power_state(iio_priv(indio_dev), true); +} + +static int ads1015_buffer_postdisable(struct iio_dev *indio_dev) +{ + return ads1015_set_power_state(iio_priv(indio_dev), false); +} + +static const struct iio_buffer_setup_ops ads1015_buffer_setup_ops = { + .preenable = ads1015_buffer_preenable, + .postenable = iio_triggered_buffer_postenable, + .predisable = iio_triggered_buffer_predisable, + .postdisable = ads1015_buffer_postdisable, + .validate_scan_mask = &iio_validate_scan_mask_onehot, +}; + +static IIO_CONST_ATTR(scale_available, "3 2 1 0.5 0.25 0.125"); +static IIO_CONST_ATTR(sampling_frequency_available, + "128 250 490 920 1600 2400 3300"); + +static struct attribute *ads1015_attributes[] = { + &iio_const_attr_scale_available.dev_attr.attr, + &iio_const_attr_sampling_frequency_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ads1015_attribute_group = { + .attrs = ads1015_attributes, +}; + +static const struct iio_info ads1015_info = { + .driver_module = THIS_MODULE, + .read_raw = ads1015_read_raw, + .write_raw = ads1015_write_raw, + .attrs = &ads1015_attribute_group, +}; + +#ifdef CONFIG_OF +static int ads1015_get_channels_config_of(struct i2c_client *client) +{ + struct ads1015_data *data = i2c_get_clientdata(client); + struct device_node *node; + + if (!client->dev.of_node || + !of_get_next_child(client->dev.of_node, NULL)) + return -EINVAL; + + for_each_child_of_node(client->dev.of_node, node) { + u32 pval; + unsigned int channel; + unsigned int pga = ADS1015_DEFAULT_PGA; + unsigned int data_rate = ADS1015_DEFAULT_DATA_RATE; + + if (of_property_read_u32(node, "reg", &pval)) { + dev_err(&client->dev, "invalid reg on %s\n", + node->full_name); + continue; + } + + channel = pval; + if (channel >= ADS1015_CHANNELS) { + dev_err(&client->dev, + "invalid channel index %d on %s\n", + channel, node->full_name); + continue; + } + + if (!of_property_read_u32(node, "ti,gain", &pval)) { + pga = pval; + if (pga > 6) { + dev_err(&client->dev, "invalid gain on %s\n", + node->full_name); + return -EINVAL; + } + } + + if (!of_property_read_u32(node, "ti,datarate", &pval)) { + data_rate = pval; + if (data_rate > 7) { + dev_err(&client->dev, + "invalid data_rate on %s\n", + node->full_name); + return -EINVAL; + } + } + + data->channel_data[channel].pga = pga; + data->channel_data[channel].data_rate = data_rate; + } + + return 0; +} +#endif + +static void ads1015_get_channels_config(struct i2c_client *client) +{ + unsigned int k; + + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct ads1015_data *data = iio_priv(indio_dev); + struct ads1015_platform_data *pdata = dev_get_platdata(&client->dev); + + /* prefer platform data */ + if (pdata) { + memcpy(data->channel_data, pdata->channel_data, + sizeof(data->channel_data)); + return; + } + +#ifdef CONFIG_OF + if (!ads1015_get_channels_config_of(client)) + return; +#endif + /* fallback on default configuration */ + for (k = 0; k < ADS1015_CHANNELS; ++k) { + data->channel_data[k].pga = ADS1015_DEFAULT_PGA; + data->channel_data[k].data_rate = ADS1015_DEFAULT_DATA_RATE; + } +} + +static int ads1015_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct iio_dev *indio_dev; + struct ads1015_data *data; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + + mutex_init(&data->lock); + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &ads1015_info; + indio_dev->name = ADS1015_DRV_NAME; + indio_dev->channels = ads1015_channels; + indio_dev->num_channels = ARRAY_SIZE(ads1015_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + /* we need to keep this ABI the same as used by hwmon ADS1015 driver */ + ads1015_get_channels_config(client); + + data->regmap = devm_regmap_init_i2c(client, &ads1015_regmap_config); + if (IS_ERR(data->regmap)) { + dev_err(&client->dev, "Failed to allocate register map\n"); + return PTR_ERR(data->regmap); + } + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + ads1015_trigger_handler, + &ads1015_buffer_setup_ops); + if (ret < 0) { + dev_err(&client->dev, "iio triggered buffer setup failed\n"); + return ret; + } + ret = pm_runtime_set_active(&client->dev); + if (ret) + goto err_buffer_cleanup; + pm_runtime_set_autosuspend_delay(&client->dev, ADS1015_SLEEP_DELAY_MS); + pm_runtime_use_autosuspend(&client->dev); + pm_runtime_enable(&client->dev); + + ret = iio_device_register(indio_dev); + if (ret < 0) { + dev_err(&client->dev, "Failed to register IIO device\n"); + goto err_buffer_cleanup; + } + + return 0; + +err_buffer_cleanup: + iio_triggered_buffer_cleanup(indio_dev); + + return ret; +} + +static int ads1015_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct ads1015_data *data = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + + pm_runtime_disable(&client->dev); + pm_runtime_set_suspended(&client->dev); + pm_runtime_put_noidle(&client->dev); + + iio_triggered_buffer_cleanup(indio_dev); + + /* power down single shot mode */ + return regmap_update_bits(data->regmap, ADS1015_CFG_REG, + ADS1015_CFG_MOD_MASK, + ADS1015_SINGLESHOT << ADS1015_CFG_MOD_SHIFT); +} + +#ifdef CONFIG_PM +static int ads1015_runtime_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct ads1015_data *data = iio_priv(indio_dev); + + return regmap_update_bits(data->regmap, ADS1015_CFG_REG, + ADS1015_CFG_MOD_MASK, + ADS1015_SINGLESHOT << ADS1015_CFG_MOD_SHIFT); +} + +static int ads1015_runtime_resume(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct ads1015_data *data = iio_priv(indio_dev); + + return regmap_update_bits(data->regmap, ADS1015_CFG_REG, + ADS1015_CFG_MOD_MASK, + ADS1015_CONTINUOUS << ADS1015_CFG_MOD_SHIFT); +} +#endif + +static const struct dev_pm_ops ads1015_pm_ops = { + SET_RUNTIME_PM_OPS(ads1015_runtime_suspend, + ads1015_runtime_resume, NULL) +}; + +static const struct i2c_device_id ads1015_id[] = { + {"ads1015", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, ads1015_id); + +static struct i2c_driver ads1015_driver = { + .driver = { + .name = ADS1015_DRV_NAME, + .pm = &ads1015_pm_ops, + }, + .probe = ads1015_probe, + .remove = ads1015_remove, + .id_table = ads1015_id, +}; + +module_i2c_driver(ads1015_driver); + +MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>"); +MODULE_DESCRIPTION("Texas Instruments ADS1015 ADC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c index 942320e32753..c1e05532d437 100644 --- a/drivers/iio/adc/ti_am335x_adc.c +++ b/drivers/iio/adc/ti_am335x_adc.c @@ -289,7 +289,7 @@ static int tiadc_iio_buffered_hardware_setup(struct iio_dev *indio_dev, goto error_kfifo_free; indio_dev->setup_ops = setup_ops; - indio_dev->modes |= INDIO_BUFFER_HARDWARE; + indio_dev->modes |= INDIO_BUFFER_SOFTWARE; return 0; diff --git a/drivers/iio/buffer/industrialio-buffer-dmaengine.c b/drivers/iio/buffer/industrialio-buffer-dmaengine.c index ebdb838d3a1c..9fabed47053d 100644 --- a/drivers/iio/buffer/industrialio-buffer-dmaengine.c +++ b/drivers/iio/buffer/industrialio-buffer-dmaengine.c @@ -93,12 +93,7 @@ static void iio_dmaengine_buffer_abort(struct iio_dma_buffer_queue *queue) struct dmaengine_buffer *dmaengine_buffer = iio_buffer_to_dmaengine_buffer(&queue->buffer); - dmaengine_terminate_all(dmaengine_buffer->chan); - /* FIXME: There is a slight chance of a race condition here. - * dmaengine_terminate_all() does not guarantee that all transfer - * callbacks have finished running. Need to introduce a - * dmaengine_terminate_all_sync(). - */ + dmaengine_terminate_sync(dmaengine_buffer->chan); iio_dma_buffer_block_list_abort(queue, &dmaengine_buffer->active); } diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig index f16de61be46d..f73290f84c90 100644 --- a/drivers/iio/chemical/Kconfig +++ b/drivers/iio/chemical/Kconfig @@ -4,6 +4,20 @@ menu "Chemical Sensors" +config ATLAS_PH_SENSOR + tristate "Atlas Scientific OEM pH-SM sensor" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select IRQ_WORK + help + Say Y here to build I2C interface support for the Atlas + Scientific OEM pH-SM sensor. + + To compile this driver as module, choose M here: the + module will be called atlas-ph-sensor. + config IAQCORE tristate "AMS iAQ-Core VOC sensors" depends on I2C diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile index 167861fadfab..b02202b41289 100644 --- a/drivers/iio/chemical/Makefile +++ b/drivers/iio/chemical/Makefile @@ -3,5 +3,6 @@ # # When adding new entries keep the list in alphabetical order +obj-$(CONFIG_ATLAS_PH_SENSOR) += atlas-ph-sensor.o obj-$(CONFIG_IAQCORE) += ams-iaq-core.o obj-$(CONFIG_VZ89X) += vz89x.o diff --git a/drivers/iio/chemical/atlas-ph-sensor.c b/drivers/iio/chemical/atlas-ph-sensor.c new file mode 100644 index 000000000000..62b37cd8fb56 --- /dev/null +++ b/drivers/iio/chemical/atlas-ph-sensor.c @@ -0,0 +1,509 @@ +/* + * atlas-ph-sensor.c - Support for Atlas Scientific OEM pH-SM sensor + * + * Copyright (C) 2015 Matt Ranostay <mranostay@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/mutex.h> +#include <linux/err.h> +#include <linux/irq.h> +#include <linux/irq_work.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/pm_runtime.h> + +#define ATLAS_REGMAP_NAME "atlas_ph_regmap" +#define ATLAS_DRV_NAME "atlas_ph" + +#define ATLAS_REG_DEV_TYPE 0x00 +#define ATLAS_REG_DEV_VERSION 0x01 + +#define ATLAS_REG_INT_CONTROL 0x04 +#define ATLAS_REG_INT_CONTROL_EN BIT(3) + +#define ATLAS_REG_PWR_CONTROL 0x06 + +#define ATLAS_REG_CALIB_STATUS 0x0d +#define ATLAS_REG_CALIB_STATUS_MASK 0x07 +#define ATLAS_REG_CALIB_STATUS_LOW BIT(0) +#define ATLAS_REG_CALIB_STATUS_MID BIT(1) +#define ATLAS_REG_CALIB_STATUS_HIGH BIT(2) + +#define ATLAS_REG_TEMP_DATA 0x0e +#define ATLAS_REG_PH_DATA 0x16 + +#define ATLAS_PH_INT_TIME_IN_US 450000 + +struct atlas_data { + struct i2c_client *client; + struct iio_trigger *trig; + struct regmap *regmap; + struct irq_work work; + + __be32 buffer[4]; /* 32-bit pH data + 32-bit pad + 64-bit timestamp */ +}; + +static const struct regmap_range atlas_volatile_ranges[] = { + regmap_reg_range(ATLAS_REG_INT_CONTROL, ATLAS_REG_INT_CONTROL), + regmap_reg_range(ATLAS_REG_PH_DATA, ATLAS_REG_PH_DATA + 4), +}; + +static const struct regmap_access_table atlas_volatile_table = { + .yes_ranges = atlas_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(atlas_volatile_ranges), +}; + +static const struct regmap_config atlas_regmap_config = { + .name = ATLAS_REGMAP_NAME, + + .reg_bits = 8, + .val_bits = 8, + + .volatile_table = &atlas_volatile_table, + .max_register = ATLAS_REG_PH_DATA + 4, + .cache_type = REGCACHE_RBTREE, +}; + +static const struct iio_chan_spec atlas_channels[] = { + { + .type = IIO_PH, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_BE, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(1), + { + .type = IIO_TEMP, + .address = ATLAS_REG_TEMP_DATA, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .output = 1, + .scan_index = -1 + }, +}; + +static int atlas_set_powermode(struct atlas_data *data, int on) +{ + return regmap_write(data->regmap, ATLAS_REG_PWR_CONTROL, on); +} + +static int atlas_set_interrupt(struct atlas_data *data, bool state) +{ + return regmap_update_bits(data->regmap, ATLAS_REG_INT_CONTROL, + ATLAS_REG_INT_CONTROL_EN, + state ? ATLAS_REG_INT_CONTROL_EN : 0); +} + +static int atlas_buffer_postenable(struct iio_dev *indio_dev) +{ + struct atlas_data *data = iio_priv(indio_dev); + int ret; + + ret = iio_triggered_buffer_postenable(indio_dev); + if (ret) + return ret; + + ret = pm_runtime_get_sync(&data->client->dev); + if (ret < 0) { + pm_runtime_put_noidle(&data->client->dev); + return ret; + } + + return atlas_set_interrupt(data, true); +} + +static int atlas_buffer_predisable(struct iio_dev *indio_dev) +{ + struct atlas_data *data = iio_priv(indio_dev); + int ret; + + ret = iio_triggered_buffer_predisable(indio_dev); + if (ret) + return ret; + + ret = atlas_set_interrupt(data, false); + if (ret) + return ret; + + pm_runtime_mark_last_busy(&data->client->dev); + return pm_runtime_put_autosuspend(&data->client->dev); +} + +static const struct iio_trigger_ops atlas_interrupt_trigger_ops = { + .owner = THIS_MODULE, +}; + +static const struct iio_buffer_setup_ops atlas_buffer_setup_ops = { + .postenable = atlas_buffer_postenable, + .predisable = atlas_buffer_predisable, +}; + +static void atlas_work_handler(struct irq_work *work) +{ + struct atlas_data *data = container_of(work, struct atlas_data, work); + + iio_trigger_poll(data->trig); +} + +static irqreturn_t atlas_trigger_handler(int irq, void *private) +{ + struct iio_poll_func *pf = private; + struct iio_dev *indio_dev = pf->indio_dev; + struct atlas_data *data = iio_priv(indio_dev); + int ret; + + ret = regmap_bulk_read(data->regmap, ATLAS_REG_PH_DATA, + (u8 *) &data->buffer, sizeof(data->buffer[0])); + + if (!ret) + iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, + iio_get_time_ns()); + + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static irqreturn_t atlas_interrupt_handler(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct atlas_data *data = iio_priv(indio_dev); + + irq_work_queue(&data->work); + + return IRQ_HANDLED; +} + +static int atlas_read_ph_measurement(struct atlas_data *data, __be32 *val) +{ + struct device *dev = &data->client->dev; + int suspended = pm_runtime_suspended(dev); + int ret; + + ret = pm_runtime_get_sync(dev); + if (ret < 0) { + pm_runtime_put_noidle(dev); + return ret; + } + + if (suspended) + usleep_range(ATLAS_PH_INT_TIME_IN_US, + ATLAS_PH_INT_TIME_IN_US + 100000); + + ret = regmap_bulk_read(data->regmap, ATLAS_REG_PH_DATA, + (u8 *) val, sizeof(*val)); + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + return ret; +} + +static int atlas_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct atlas_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: { + int ret; + __be32 reg; + + switch (chan->type) { + case IIO_TEMP: + ret = regmap_bulk_read(data->regmap, chan->address, + (u8 *) ®, sizeof(reg)); + break; + case IIO_PH: + mutex_lock(&indio_dev->mlock); + + if (iio_buffer_enabled(indio_dev)) + ret = -EBUSY; + else + ret = atlas_read_ph_measurement(data, ®); + + mutex_unlock(&indio_dev->mlock); + break; + default: + ret = -EINVAL; + } + + if (!ret) { + *val = be32_to_cpu(reg); + ret = IIO_VAL_INT; + } + return ret; + } + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_TEMP: + *val = 1; /* 0.01 */ + *val2 = 100; + break; + case IIO_PH: + *val = 1; /* 0.001 */ + *val2 = 1000; + break; + default: + return -EINVAL; + } + return IIO_VAL_FRACTIONAL; + } + + return -EINVAL; +} + +static int atlas_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct atlas_data *data = iio_priv(indio_dev); + __be32 reg = cpu_to_be32(val); + + if (val2 != 0 || val < 0 || val > 20000) + return -EINVAL; + + if (mask != IIO_CHAN_INFO_RAW || chan->type != IIO_TEMP) + return -EINVAL; + + return regmap_bulk_write(data->regmap, chan->address, + ®, sizeof(reg)); +} + +static const struct iio_info atlas_info = { + .driver_module = THIS_MODULE, + .read_raw = atlas_read_raw, + .write_raw = atlas_write_raw, +}; + +static int atlas_check_calibration(struct atlas_data *data) +{ + struct device *dev = &data->client->dev; + int ret; + unsigned int val; + + ret = regmap_read(data->regmap, ATLAS_REG_CALIB_STATUS, &val); + if (ret) + return ret; + + if (!(val & ATLAS_REG_CALIB_STATUS_MASK)) { + dev_warn(dev, "device has not been calibrated\n"); + return 0; + } + + if (!(val & ATLAS_REG_CALIB_STATUS_LOW)) + dev_warn(dev, "device missing low point calibration\n"); + + if (!(val & ATLAS_REG_CALIB_STATUS_MID)) + dev_warn(dev, "device missing mid point calibration\n"); + + if (!(val & ATLAS_REG_CALIB_STATUS_HIGH)) + dev_warn(dev, "device missing high point calibration\n"); + + return 0; +}; + +static int atlas_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct atlas_data *data; + struct iio_trigger *trig; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + indio_dev->info = &atlas_info; + indio_dev->name = ATLAS_DRV_NAME; + indio_dev->channels = atlas_channels; + indio_dev->num_channels = ARRAY_SIZE(atlas_channels); + indio_dev->modes = INDIO_BUFFER_SOFTWARE | INDIO_DIRECT_MODE; + indio_dev->dev.parent = &client->dev; + + trig = devm_iio_trigger_alloc(&client->dev, "%s-dev%d", + indio_dev->name, indio_dev->id); + + if (!trig) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->client = client; + data->trig = trig; + trig->dev.parent = indio_dev->dev.parent; + trig->ops = &atlas_interrupt_trigger_ops; + iio_trigger_set_drvdata(trig, indio_dev); + + i2c_set_clientdata(client, indio_dev); + + data->regmap = devm_regmap_init_i2c(client, &atlas_regmap_config); + if (IS_ERR(data->regmap)) { + dev_err(&client->dev, "regmap initialization failed\n"); + return PTR_ERR(data->regmap); + } + + ret = pm_runtime_set_active(&client->dev); + if (ret) + return ret; + + if (client->irq <= 0) { + dev_err(&client->dev, "no valid irq defined\n"); + return -EINVAL; + } + + ret = atlas_check_calibration(data); + if (ret) + return ret; + + ret = iio_trigger_register(trig); + if (ret) { + dev_err(&client->dev, "failed to register trigger\n"); + return ret; + } + + ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + &atlas_trigger_handler, &atlas_buffer_setup_ops); + if (ret) { + dev_err(&client->dev, "cannot setup iio trigger\n"); + goto unregister_trigger; + } + + init_irq_work(&data->work, atlas_work_handler); + + /* interrupt pin toggles on new conversion */ + ret = devm_request_threaded_irq(&client->dev, client->irq, + NULL, atlas_interrupt_handler, + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "atlas_irq", + indio_dev); + if (ret) { + dev_err(&client->dev, "request irq (%d) failed\n", client->irq); + goto unregister_buffer; + } + + ret = atlas_set_powermode(data, 1); + if (ret) { + dev_err(&client->dev, "cannot power device on"); + goto unregister_buffer; + } + + pm_runtime_enable(&client->dev); + pm_runtime_set_autosuspend_delay(&client->dev, 2500); + pm_runtime_use_autosuspend(&client->dev); + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(&client->dev, "unable to register device\n"); + goto unregister_pm; + } + + return 0; + +unregister_pm: + pm_runtime_disable(&client->dev); + atlas_set_powermode(data, 0); + +unregister_buffer: + iio_triggered_buffer_cleanup(indio_dev); + +unregister_trigger: + iio_trigger_unregister(data->trig); + + return ret; +} + +static int atlas_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct atlas_data *data = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + iio_trigger_unregister(data->trig); + + pm_runtime_disable(&client->dev); + pm_runtime_set_suspended(&client->dev); + pm_runtime_put_noidle(&client->dev); + + return atlas_set_powermode(data, 0); +} + +#ifdef CONFIG_PM +static int atlas_runtime_suspend(struct device *dev) +{ + struct atlas_data *data = + iio_priv(i2c_get_clientdata(to_i2c_client(dev))); + + return atlas_set_powermode(data, 0); +} + +static int atlas_runtime_resume(struct device *dev) +{ + struct atlas_data *data = + iio_priv(i2c_get_clientdata(to_i2c_client(dev))); + + return atlas_set_powermode(data, 1); +} +#endif + +static const struct dev_pm_ops atlas_pm_ops = { + SET_RUNTIME_PM_OPS(atlas_runtime_suspend, + atlas_runtime_resume, NULL) +}; + +static const struct i2c_device_id atlas_id[] = { + { "atlas-ph-sm", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, atlas_id); + +static const struct of_device_id atlas_dt_ids[] = { + { .compatible = "atlas,ph-sm" }, + { } +}; +MODULE_DEVICE_TABLE(of, atlas_dt_ids); + +static struct i2c_driver atlas_driver = { + .driver = { + .name = ATLAS_DRV_NAME, + .of_match_table = of_match_ptr(atlas_dt_ids), + .pm = &atlas_pm_ops, + }, + .probe = atlas_probe, + .remove = atlas_remove, + .id_table = atlas_id, +}; +module_i2c_driver(atlas_driver); + +MODULE_AUTHOR("Matt Ranostay <mranostay@gmail.com>"); +MODULE_DESCRIPTION("Atlas Scientific pH-SM sensor"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/chemical/vz89x.c b/drivers/iio/chemical/vz89x.c index b8b804923230..652649da500f 100644 --- a/drivers/iio/chemical/vz89x.c +++ b/drivers/iio/chemical/vz89x.c @@ -249,7 +249,7 @@ static int vz89x_probe(struct i2c_client *client, I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE)) data->xfer = vz89x_smbus_xfer; else - return -ENOTSUPP; + return -EOPNOTSUPP; i2c_set_clientdata(client, indio_dev); data->client = client; diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index 8447c31e27f2..f5a2d445d0c0 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -18,13 +18,15 @@ #include <asm/unaligned.h> #include <linux/iio/common/st_sensors.h> +#include "st_sensors_core.h" + static inline u32 st_sensors_get_unaligned_le24(const u8 *p) { return (s32)((p[0] | p[1] << 8 | p[2] << 16) << 8) >> 8; } -static int st_sensors_write_data_with_mask(struct iio_dev *indio_dev, - u8 reg_addr, u8 mask, u8 data) +int st_sensors_write_data_with_mask(struct iio_dev *indio_dev, + u8 reg_addr, u8 mask, u8 data) { int err; u8 new_data; diff --git a/drivers/iio/common/st_sensors/st_sensors_core.h b/drivers/iio/common/st_sensors/st_sensors_core.h new file mode 100644 index 000000000000..cd88098ff6f1 --- /dev/null +++ b/drivers/iio/common/st_sensors/st_sensors_core.h @@ -0,0 +1,8 @@ +/* + * Local functions in the ST Sensors core + */ +#ifndef __ST_SENSORS_CORE_H +#define __ST_SENSORS_CORE_H +int st_sensors_write_data_with_mask(struct iio_dev *indio_dev, + u8 reg_addr, u8 mask, u8 data); +#endif diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c index 3e907040c2c7..6a8c98327945 100644 --- a/drivers/iio/common/st_sensors/st_sensors_trigger.c +++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c @@ -14,32 +14,65 @@ #include <linux/iio/iio.h> #include <linux/iio/trigger.h> #include <linux/interrupt.h> - #include <linux/iio/common/st_sensors.h> - +#include "st_sensors_core.h" int st_sensors_allocate_trigger(struct iio_dev *indio_dev, const struct iio_trigger_ops *trigger_ops) { - int err; + int err, irq; struct st_sensor_data *sdata = iio_priv(indio_dev); + unsigned long irq_trig; sdata->trig = iio_trigger_alloc("%s-trigger", indio_dev->name); if (sdata->trig == NULL) { - err = -ENOMEM; dev_err(&indio_dev->dev, "failed to allocate iio trigger.\n"); - goto iio_trigger_alloc_error; + return -ENOMEM; } - err = request_threaded_irq(sdata->get_irq_data_ready(indio_dev), + irq = sdata->get_irq_data_ready(indio_dev); + irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq)); + /* + * If the IRQ is triggered on falling edge, we need to mark the + * interrupt as active low, if the hardware supports this. + */ + if (irq_trig == IRQF_TRIGGER_FALLING) { + if (!sdata->sensor_settings->drdy_irq.addr_ihl) { + dev_err(&indio_dev->dev, + "falling edge specified for IRQ but hardware " + "only support rising edge, will request " + "rising edge\n"); + irq_trig = IRQF_TRIGGER_RISING; + } else { + /* Set up INT active low i.e. falling edge */ + err = st_sensors_write_data_with_mask(indio_dev, + sdata->sensor_settings->drdy_irq.addr_ihl, + sdata->sensor_settings->drdy_irq.mask_ihl, 1); + if (err < 0) + goto iio_trigger_free; + dev_info(&indio_dev->dev, + "interrupts on the falling edge\n"); + } + } else if (irq_trig == IRQF_TRIGGER_RISING) { + dev_info(&indio_dev->dev, + "interrupts on the rising edge\n"); + + } else { + dev_err(&indio_dev->dev, + "unsupported IRQ trigger specified (%lx), only " + "rising and falling edges supported, enforce " + "rising edge\n", irq_trig); + irq_trig = IRQF_TRIGGER_RISING; + } + err = request_threaded_irq(irq, iio_trigger_generic_data_rdy_poll, NULL, - IRQF_TRIGGER_RISING, + irq_trig, sdata->trig->name, sdata->trig); if (err) { dev_err(&indio_dev->dev, "failed to request trigger IRQ.\n"); - goto request_irq_error; + goto iio_trigger_free; } iio_trigger_set_drvdata(sdata->trig, indio_dev); @@ -57,9 +90,8 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, iio_trigger_register_error: free_irq(sdata->get_irq_data_ready(indio_dev), sdata->trig); -request_irq_error: +iio_trigger_free: iio_trigger_free(sdata->trig); -iio_trigger_alloc_error: return err; } EXPORT_SYMBOL(st_sensors_allocate_trigger); diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index e701e28fb1cd..a995139f907c 100644 --- a/drivers/iio/dac/Kconfig +++ b/drivers/iio/dac/Kconfig @@ -10,8 +10,10 @@ config AD5064 depends on (SPI_MASTER && I2C!=m) || I2C help Say yes here to build support for Analog Devices AD5024, AD5025, AD5044, - AD5045, AD5064, AD5064-1, AD5065, AD5628, AD5629R, AD5648, AD5666, AD5668, - AD5669R Digital to Analog Converter. + AD5045, AD5064, AD5064-1, AD5065, AD5625, AD5625R, AD5627, AD5627R, + AD5628, AD5629R, AD5645R, AD5647R, AD5648, AD5665, AD5665R, AD5666, + AD5667, AD5667R, AD5668, AD5669R, LTC2606, LTC2607, LTC2609, LTC2616, + LTC2617, LTC2619, LTC2626, LTC2627, LTC2629 Digital to Analog Converter. To compile this driver as a module, choose M here: the module will be called ad5064. @@ -111,6 +113,16 @@ config AD5755 To compile this driver as a module, choose M here: the module will be called ad5755. +config AD5761 + tristate "Analog Devices AD5761/61R/21/21R DAC driver" + depends on SPI_MASTER + help + Say yes here to build support for Analog Devices AD5761, AD5761R, AD5721, + AD5721R Digital to Analog Converter. + + To compile this driver as a module, choose M here: the + module will be called ad5761. + config AD5764 tristate "Analog Devices AD5764/64R/44/44R DAC driver" depends on SPI_MASTER @@ -176,11 +188,11 @@ config MAX5821 10 bits DAC. config MCP4725 - tristate "MCP4725 DAC driver" + tristate "MCP4725/6 DAC driver" depends on I2C ---help--- Say Y here if you want to build a driver for the Microchip - MCP 4725 12-bit digital-to-analog converter (DAC) with I2C + MCP 4725/6 12-bit digital-to-analog converter (DAC) with I2C interface. To compile this driver as a module, choose M here: the module @@ -196,4 +208,23 @@ config MCP4922 To compile this driver as a module, choose M here: the module will be called mcp4922. +config STX104 + tristate "Apex Embedded Systems STX104 DAC driver" + depends on ISA + help + Say yes here to build support for the 2-channel DAC on the Apex + Embedded Systems STX104 integrated analog PC/104 card. The base port + addresses for the devices may be configured via the "base" module + parameter array. + +config VF610_DAC + tristate "Vybrid vf610 DAC driver" + depends on OF + depends on HAS_IOMEM + help + Say yes here to support Vybrid board digital-to-analog converter. + + This driver can also be built as a module. If so, the module will + be called vf610_dac. + endmenu diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile index 63ae05633e0c..67b48429686d 100644 --- a/drivers/iio/dac/Makefile +++ b/drivers/iio/dac/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_AD5504) += ad5504.o obj-$(CONFIG_AD5446) += ad5446.o obj-$(CONFIG_AD5449) += ad5449.o obj-$(CONFIG_AD5755) += ad5755.o +obj-$(CONFIG_AD5761) += ad5761.o obj-$(CONFIG_AD5764) += ad5764.o obj-$(CONFIG_AD5791) += ad5791.o obj-$(CONFIG_AD5686) += ad5686.o @@ -21,3 +22,5 @@ obj-$(CONFIG_MAX517) += max517.o obj-$(CONFIG_MAX5821) += max5821.o obj-$(CONFIG_MCP4725) += mcp4725.o obj-$(CONFIG_MCP4922) += mcp4922.o +obj-$(CONFIG_STX104) += stx104.o +obj-$(CONFIG_VF610_DAC) += vf610_dac.o diff --git a/drivers/iio/dac/ad5064.c b/drivers/iio/dac/ad5064.c index 81ca0081a019..6803e4a137cd 100644 --- a/drivers/iio/dac/ad5064.c +++ b/drivers/iio/dac/ad5064.c @@ -1,6 +1,9 @@ /* - * AD5024, AD5025, AD5044, AD5045, AD5064, AD5064-1, AD5065, AD5628, AD5629R, - * AD5648, AD5666, AD5668, AD5669R Digital to analog converters driver + * AD5024, AD5025, AD5044, AD5045, AD5064, AD5064-1, AD5065, AD5625, AD5625R, + * AD5627, AD5627R, AD5628, AD5629R, AD5645R, AD5647R, AD5648, AD5665, AD5665R, + * AD5666, AD5667, AD5667R, AD5668, AD5669R, LTC2606, LTC2607, LTC2609, LTC2616, + * LTC2617, LTC2619, LTC2626, LTC2627, LTC2629 Digital to analog converters + * driver * * Copyright 2011 Analog Devices Inc. * @@ -39,6 +42,9 @@ #define AD5064_CMD_RESET 0x7 #define AD5064_CMD_CONFIG 0x8 +#define AD5064_CMD_RESET_V2 0x5 +#define AD5064_CMD_CONFIG_V2 0x7 + #define AD5064_CONFIG_DAISY_CHAIN_ENABLE BIT(1) #define AD5064_CONFIG_INT_VREF_ENABLE BIT(0) @@ -48,12 +54,25 @@ #define AD5064_LDAC_PWRDN_3STATE 0x3 /** + * enum ad5064_regmap_type - Register layout variant + * @AD5064_REGMAP_ADI: Old Analog Devices register map layout + * @AD5064_REGMAP_ADI2: New Analog Devices register map layout + * @AD5064_REGMAP_LTC: LTC register map layout + */ +enum ad5064_regmap_type { + AD5064_REGMAP_ADI, + AD5064_REGMAP_ADI2, + AD5064_REGMAP_LTC, +}; + +/** * struct ad5064_chip_info - chip specific information * @shared_vref: whether the vref supply is shared between channels - * @internal_vref: internal reference voltage. 0 if the chip has no internal - * vref. + * @internal_vref: internal reference voltage. 0 if the chip has no + internal vref. * @channel: channel specification * @num_channels: number of channels + * @regmap_type: register map layout variant */ struct ad5064_chip_info { @@ -61,6 +80,7 @@ struct ad5064_chip_info { unsigned long internal_vref; const struct iio_chan_spec *channels; unsigned int num_channels; + enum ad5064_regmap_type regmap_type; }; struct ad5064_state; @@ -111,18 +131,43 @@ enum ad5064_type { ID_AD5064, ID_AD5064_1, ID_AD5065, + ID_AD5625, + ID_AD5625R_1V25, + ID_AD5625R_2V5, + ID_AD5627, + ID_AD5627R_1V25, + ID_AD5627R_2V5, ID_AD5628_1, ID_AD5628_2, ID_AD5629_1, ID_AD5629_2, + ID_AD5645R_1V25, + ID_AD5645R_2V5, + ID_AD5647R_1V25, + ID_AD5647R_2V5, ID_AD5648_1, ID_AD5648_2, + ID_AD5665, + ID_AD5665R_1V25, + ID_AD5665R_2V5, ID_AD5666_1, ID_AD5666_2, + ID_AD5667, + ID_AD5667R_1V25, + ID_AD5667R_2V5, ID_AD5668_1, ID_AD5668_2, ID_AD5669_1, ID_AD5669_2, + ID_LTC2606, + ID_LTC2607, + ID_LTC2609, + ID_LTC2616, + ID_LTC2617, + ID_LTC2619, + ID_LTC2626, + ID_LTC2627, + ID_LTC2629, }; static int ad5064_write(struct ad5064_state *st, unsigned int cmd, @@ -136,15 +181,27 @@ static int ad5064_write(struct ad5064_state *st, unsigned int cmd, static int ad5064_sync_powerdown_mode(struct ad5064_state *st, const struct iio_chan_spec *chan) { - unsigned int val; + unsigned int val, address; + unsigned int shift; int ret; - val = (0x1 << chan->address); + if (st->chip_info->regmap_type == AD5064_REGMAP_LTC) { + val = 0; + address = chan->address; + } else { + if (st->chip_info->regmap_type == AD5064_REGMAP_ADI2) + shift = 4; + else + shift = 8; + + val = (0x1 << chan->address); + address = 0; - if (st->pwr_down[chan->channel]) - val |= st->pwr_down_mode[chan->channel] << 8; + if (st->pwr_down[chan->channel]) + val |= st->pwr_down_mode[chan->channel] << shift; + } - ret = ad5064_write(st, AD5064_CMD_POWERDOWN_DAC, 0, val, 0); + ret = ad5064_write(st, AD5064_CMD_POWERDOWN_DAC, address, val, 0); return ret; } @@ -155,6 +212,10 @@ static const char * const ad5064_powerdown_modes[] = { "three_state", }; +static const char * const ltc2617_powerdown_modes[] = { + "90kohm_to_gnd", +}; + static int ad5064_get_powerdown_mode(struct iio_dev *indio_dev, const struct iio_chan_spec *chan) { @@ -185,6 +246,13 @@ static const struct iio_enum ad5064_powerdown_mode_enum = { .set = ad5064_set_powerdown_mode, }; +static const struct iio_enum ltc2617_powerdown_mode_enum = { + .items = ltc2617_powerdown_modes, + .num_items = ARRAY_SIZE(ltc2617_powerdown_modes), + .get = ad5064_get_powerdown_mode, + .set = ad5064_set_powerdown_mode, +}; + static ssize_t ad5064_read_dac_powerdown(struct iio_dev *indio_dev, uintptr_t private, const struct iio_chan_spec *chan, char *buf) { @@ -295,7 +363,19 @@ static const struct iio_chan_spec_ext_info ad5064_ext_info[] = { { }, }; -#define AD5064_CHANNEL(chan, addr, bits, _shift) { \ +static const struct iio_chan_spec_ext_info ltc2617_ext_info[] = { + { + .name = "powerdown", + .read = ad5064_read_dac_powerdown, + .write = ad5064_write_dac_powerdown, + .shared = IIO_SEPARATE, + }, + IIO_ENUM("powerdown_mode", IIO_SEPARATE, <c2617_powerdown_mode_enum), + IIO_ENUM_AVAILABLE("powerdown_mode", <c2617_powerdown_mode_enum), + { }, +}; + +#define AD5064_CHANNEL(chan, addr, bits, _shift, _ext_info) { \ .type = IIO_VOLTAGE, \ .indexed = 1, \ .output = 1, \ @@ -309,145 +389,340 @@ static const struct iio_chan_spec_ext_info ad5064_ext_info[] = { .storagebits = 16, \ .shift = (_shift), \ }, \ - .ext_info = ad5064_ext_info, \ + .ext_info = (_ext_info), \ } -#define DECLARE_AD5064_CHANNELS(name, bits, shift) \ +#define DECLARE_AD5064_CHANNELS(name, bits, shift, ext_info) \ const struct iio_chan_spec name[] = { \ - AD5064_CHANNEL(0, 0, bits, shift), \ - AD5064_CHANNEL(1, 1, bits, shift), \ - AD5064_CHANNEL(2, 2, bits, shift), \ - AD5064_CHANNEL(3, 3, bits, shift), \ - AD5064_CHANNEL(4, 4, bits, shift), \ - AD5064_CHANNEL(5, 5, bits, shift), \ - AD5064_CHANNEL(6, 6, bits, shift), \ - AD5064_CHANNEL(7, 7, bits, shift), \ + AD5064_CHANNEL(0, 0, bits, shift, ext_info), \ + AD5064_CHANNEL(1, 1, bits, shift, ext_info), \ + AD5064_CHANNEL(2, 2, bits, shift, ext_info), \ + AD5064_CHANNEL(3, 3, bits, shift, ext_info), \ + AD5064_CHANNEL(4, 4, bits, shift, ext_info), \ + AD5064_CHANNEL(5, 5, bits, shift, ext_info), \ + AD5064_CHANNEL(6, 6, bits, shift, ext_info), \ + AD5064_CHANNEL(7, 7, bits, shift, ext_info), \ } -#define DECLARE_AD5065_CHANNELS(name, bits, shift) \ +#define DECLARE_AD5065_CHANNELS(name, bits, shift, ext_info) \ const struct iio_chan_spec name[] = { \ - AD5064_CHANNEL(0, 0, bits, shift), \ - AD5064_CHANNEL(1, 3, bits, shift), \ + AD5064_CHANNEL(0, 0, bits, shift, ext_info), \ + AD5064_CHANNEL(1, 3, bits, shift, ext_info), \ } -static DECLARE_AD5064_CHANNELS(ad5024_channels, 12, 8); -static DECLARE_AD5064_CHANNELS(ad5044_channels, 14, 6); -static DECLARE_AD5064_CHANNELS(ad5064_channels, 16, 4); +static DECLARE_AD5064_CHANNELS(ad5024_channels, 12, 8, ad5064_ext_info); +static DECLARE_AD5064_CHANNELS(ad5044_channels, 14, 6, ad5064_ext_info); +static DECLARE_AD5064_CHANNELS(ad5064_channels, 16, 4, ad5064_ext_info); + +static DECLARE_AD5065_CHANNELS(ad5025_channels, 12, 8, ad5064_ext_info); +static DECLARE_AD5065_CHANNELS(ad5045_channels, 14, 6, ad5064_ext_info); +static DECLARE_AD5065_CHANNELS(ad5065_channels, 16, 4, ad5064_ext_info); -static DECLARE_AD5065_CHANNELS(ad5025_channels, 12, 8); -static DECLARE_AD5065_CHANNELS(ad5045_channels, 14, 6); -static DECLARE_AD5065_CHANNELS(ad5065_channels, 16, 4); +static DECLARE_AD5064_CHANNELS(ad5629_channels, 12, 4, ad5064_ext_info); +static DECLARE_AD5064_CHANNELS(ad5645_channels, 14, 2, ad5064_ext_info); +static DECLARE_AD5064_CHANNELS(ad5669_channels, 16, 0, ad5064_ext_info); -static DECLARE_AD5064_CHANNELS(ad5629_channels, 12, 4); -static DECLARE_AD5064_CHANNELS(ad5669_channels, 16, 0); +static DECLARE_AD5064_CHANNELS(ltc2607_channels, 16, 0, ltc2617_ext_info); +static DECLARE_AD5064_CHANNELS(ltc2617_channels, 14, 2, ltc2617_ext_info); +static DECLARE_AD5064_CHANNELS(ltc2627_channels, 12, 4, ltc2617_ext_info); static const struct ad5064_chip_info ad5064_chip_info_tbl[] = { [ID_AD5024] = { .shared_vref = false, .channels = ad5024_channels, .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5025] = { .shared_vref = false, .channels = ad5025_channels, .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5044] = { .shared_vref = false, .channels = ad5044_channels, .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5045] = { .shared_vref = false, .channels = ad5045_channels, .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5064] = { .shared_vref = false, .channels = ad5064_channels, .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5064_1] = { .shared_vref = true, .channels = ad5064_channels, .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5065] = { .shared_vref = false, .channels = ad5065_channels, .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI, + }, + [ID_AD5625] = { + .shared_vref = true, + .channels = ad5629_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5625R_1V25] = { + .shared_vref = true, + .internal_vref = 1250000, + .channels = ad5629_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5625R_2V5] = { + .shared_vref = true, + .internal_vref = 2500000, + .channels = ad5629_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5627] = { + .shared_vref = true, + .channels = ad5629_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5627R_1V25] = { + .shared_vref = true, + .internal_vref = 1250000, + .channels = ad5629_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5627R_2V5] = { + .shared_vref = true, + .internal_vref = 2500000, + .channels = ad5629_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI2 }, [ID_AD5628_1] = { .shared_vref = true, .internal_vref = 2500000, .channels = ad5024_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5628_2] = { .shared_vref = true, .internal_vref = 5000000, .channels = ad5024_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5629_1] = { .shared_vref = true, .internal_vref = 2500000, .channels = ad5629_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5629_2] = { .shared_vref = true, .internal_vref = 5000000, .channels = ad5629_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, + }, + [ID_AD5645R_1V25] = { + .shared_vref = true, + .internal_vref = 1250000, + .channels = ad5645_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5645R_2V5] = { + .shared_vref = true, + .internal_vref = 2500000, + .channels = ad5645_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5647R_1V25] = { + .shared_vref = true, + .internal_vref = 1250000, + .channels = ad5645_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5647R_2V5] = { + .shared_vref = true, + .internal_vref = 2500000, + .channels = ad5645_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI2 }, [ID_AD5648_1] = { .shared_vref = true, .internal_vref = 2500000, .channels = ad5044_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5648_2] = { .shared_vref = true, .internal_vref = 5000000, .channels = ad5044_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, + }, + [ID_AD5665] = { + .shared_vref = true, + .channels = ad5669_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5665R_1V25] = { + .shared_vref = true, + .internal_vref = 1250000, + .channels = ad5669_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5665R_2V5] = { + .shared_vref = true, + .internal_vref = 2500000, + .channels = ad5669_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI2 }, [ID_AD5666_1] = { .shared_vref = true, .internal_vref = 2500000, .channels = ad5064_channels, .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5666_2] = { .shared_vref = true, .internal_vref = 5000000, .channels = ad5064_channels, .num_channels = 4, + .regmap_type = AD5064_REGMAP_ADI, + }, + [ID_AD5667] = { + .shared_vref = true, + .channels = ad5669_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5667R_1V25] = { + .shared_vref = true, + .internal_vref = 1250000, + .channels = ad5669_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI2 + }, + [ID_AD5667R_2V5] = { + .shared_vref = true, + .internal_vref = 2500000, + .channels = ad5669_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_ADI2 }, [ID_AD5668_1] = { .shared_vref = true, .internal_vref = 2500000, .channels = ad5064_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5668_2] = { .shared_vref = true, .internal_vref = 5000000, .channels = ad5064_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5669_1] = { .shared_vref = true, .internal_vref = 2500000, .channels = ad5669_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, }, [ID_AD5669_2] = { .shared_vref = true, .internal_vref = 5000000, .channels = ad5669_channels, .num_channels = 8, + .regmap_type = AD5064_REGMAP_ADI, + }, + [ID_LTC2606] = { + .shared_vref = true, + .internal_vref = 0, + .channels = ltc2607_channels, + .num_channels = 1, + .regmap_type = AD5064_REGMAP_LTC, + }, + [ID_LTC2607] = { + .shared_vref = true, + .internal_vref = 0, + .channels = ltc2607_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_LTC, + }, + [ID_LTC2609] = { + .shared_vref = false, + .internal_vref = 0, + .channels = ltc2607_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_LTC, + }, + [ID_LTC2616] = { + .shared_vref = true, + .internal_vref = 0, + .channels = ltc2617_channels, + .num_channels = 1, + .regmap_type = AD5064_REGMAP_LTC, + }, + [ID_LTC2617] = { + .shared_vref = true, + .internal_vref = 0, + .channels = ltc2617_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_LTC, + }, + [ID_LTC2619] = { + .shared_vref = false, + .internal_vref = 0, + .channels = ltc2617_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_LTC, + }, + [ID_LTC2626] = { + .shared_vref = true, + .internal_vref = 0, + .channels = ltc2627_channels, + .num_channels = 1, + .regmap_type = AD5064_REGMAP_LTC, + }, + [ID_LTC2627] = { + .shared_vref = true, + .internal_vref = 0, + .channels = ltc2627_channels, + .num_channels = 2, + .regmap_type = AD5064_REGMAP_LTC, + }, + [ID_LTC2629] = { + .shared_vref = false, + .internal_vref = 0, + .channels = ltc2627_channels, + .num_channels = 4, + .regmap_type = AD5064_REGMAP_LTC, }, }; @@ -469,6 +744,22 @@ static const char * const ad5064_vref_name(struct ad5064_state *st, return st->chip_info->shared_vref ? "vref" : ad5064_vref_names[vref]; } +static int ad5064_set_config(struct ad5064_state *st, unsigned int val) +{ + unsigned int cmd; + + switch (st->chip_info->regmap_type) { + case AD5064_REGMAP_ADI2: + cmd = AD5064_CMD_CONFIG_V2; + break; + default: + cmd = AD5064_CMD_CONFIG; + break; + } + + return ad5064_write(st, cmd, 0, val, 0); +} + static int ad5064_probe(struct device *dev, enum ad5064_type type, const char *name, ad5064_write_func write) { @@ -498,8 +789,7 @@ static int ad5064_probe(struct device *dev, enum ad5064_type type, if (!st->chip_info->internal_vref) return ret; st->use_internal_vref = true; - ret = ad5064_write(st, AD5064_CMD_CONFIG, 0, - AD5064_CONFIG_INT_VREF_ENABLE, 0); + ret = ad5064_set_config(st, AD5064_CONFIG_INT_VREF_ENABLE); if (ret) { dev_err(dev, "Failed to enable internal vref: %d\n", ret); @@ -628,9 +918,19 @@ static int ad5064_i2c_write(struct ad5064_state *st, unsigned int cmd, unsigned int addr, unsigned int val) { struct i2c_client *i2c = to_i2c_client(st->dev); + unsigned int cmd_shift; int ret; - st->data.i2c[0] = (cmd << 4) | addr; + switch (st->chip_info->regmap_type) { + case AD5064_REGMAP_ADI2: + cmd_shift = 3; + break; + default: + cmd_shift = 4; + break; + } + + st->data.i2c[0] = (cmd << cmd_shift) | addr; put_unaligned_be16(val, &st->data.i2c[1]); ret = i2c_master_send(i2c, st->data.i2c, 3); @@ -653,12 +953,35 @@ static int ad5064_i2c_remove(struct i2c_client *i2c) } static const struct i2c_device_id ad5064_i2c_ids[] = { + {"ad5625", ID_AD5625 }, + {"ad5625r-1v25", ID_AD5625R_1V25 }, + {"ad5625r-2v5", ID_AD5625R_2V5 }, + {"ad5627", ID_AD5627 }, + {"ad5627r-1v25", ID_AD5627R_1V25 }, + {"ad5627r-2v5", ID_AD5627R_2V5 }, {"ad5629-1", ID_AD5629_1}, {"ad5629-2", ID_AD5629_2}, {"ad5629-3", ID_AD5629_2}, /* similar enough to ad5629-2 */ + {"ad5645r-1v25", ID_AD5645R_1V25 }, + {"ad5645r-2v5", ID_AD5645R_2V5 }, + {"ad5665", ID_AD5665 }, + {"ad5665r-1v25", ID_AD5665R_1V25 }, + {"ad5665r-2v5", ID_AD5665R_2V5 }, + {"ad5667", ID_AD5667 }, + {"ad5667r-1v25", ID_AD5667R_1V25 }, + {"ad5667r-2v5", ID_AD5667R_2V5 }, {"ad5669-1", ID_AD5669_1}, {"ad5669-2", ID_AD5669_2}, {"ad5669-3", ID_AD5669_2}, /* similar enough to ad5669-2 */ + {"ltc2606", ID_LTC2606}, + {"ltc2607", ID_LTC2607}, + {"ltc2609", ID_LTC2609}, + {"ltc2616", ID_LTC2616}, + {"ltc2617", ID_LTC2617}, + {"ltc2619", ID_LTC2619}, + {"ltc2626", ID_LTC2626}, + {"ltc2627", ID_LTC2627}, + {"ltc2629", ID_LTC2629}, {} }; MODULE_DEVICE_TABLE(i2c, ad5064_i2c_ids); diff --git a/drivers/iio/dac/ad5761.c b/drivers/iio/dac/ad5761.c new file mode 100644 index 000000000000..d6510d6928b3 --- /dev/null +++ b/drivers/iio/dac/ad5761.c @@ -0,0 +1,430 @@ +/* + * AD5721, AD5721R, AD5761, AD5761R, Voltage Output Digital to Analog Converter + * + * Copyright 2016 Qtechnology A/S + * 2016 Ricardo Ribalda <ricardo.ribalda@gmail.com> + * + * Licensed under the GPL-2. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/bitops.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/regulator/consumer.h> +#include <linux/platform_data/ad5761.h> + +#define AD5761_ADDR(addr) ((addr & 0xf) << 16) +#define AD5761_ADDR_NOOP 0x0 +#define AD5761_ADDR_DAC_WRITE 0x3 +#define AD5761_ADDR_CTRL_WRITE_REG 0x4 +#define AD5761_ADDR_SW_DATA_RESET 0x7 +#define AD5761_ADDR_DAC_READ 0xb +#define AD5761_ADDR_CTRL_READ_REG 0xc +#define AD5761_ADDR_SW_FULL_RESET 0xf + +#define AD5761_CTRL_USE_INTVREF BIT(5) +#define AD5761_CTRL_ETS BIT(6) + +/** + * struct ad5761_chip_info - chip specific information + * @int_vref: Value of the internal reference voltage in mV - 0 if external + * reference voltage is used + * @channel: channel specification +*/ + +struct ad5761_chip_info { + unsigned long int_vref; + const struct iio_chan_spec channel; +}; + +struct ad5761_range_params { + int m; + int c; +}; + +enum ad5761_supported_device_ids { + ID_AD5721, + ID_AD5721R, + ID_AD5761, + ID_AD5761R, +}; + +/** + * struct ad5761_state - driver instance specific data + * @spi: spi_device + * @vref_reg: reference voltage regulator + * @use_intref: true when the internal voltage reference is used + * @vref: actual voltage reference in mVolts + * @range: output range mode used + * @data: cache aligned spi buffer + */ +struct ad5761_state { + struct spi_device *spi; + struct regulator *vref_reg; + + bool use_intref; + int vref; + enum ad5761_voltage_range range; + + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + union { + __be32 d32; + u8 d8[4]; + } data[3] ____cacheline_aligned; +}; + +static const struct ad5761_range_params ad5761_range_params[] = { + [AD5761_VOLTAGE_RANGE_M10V_10V] = { + .m = 80, + .c = 40, + }, + [AD5761_VOLTAGE_RANGE_0V_10V] = { + .m = 40, + .c = 0, + }, + [AD5761_VOLTAGE_RANGE_M5V_5V] = { + .m = 40, + .c = 20, + }, + [AD5761_VOLTAGE_RANGE_0V_5V] = { + .m = 20, + .c = 0, + }, + [AD5761_VOLTAGE_RANGE_M2V5_7V5] = { + .m = 40, + .c = 10, + }, + [AD5761_VOLTAGE_RANGE_M3V_3V] = { + .m = 24, + .c = 12, + }, + [AD5761_VOLTAGE_RANGE_0V_16V] = { + .m = 64, + .c = 0, + }, + [AD5761_VOLTAGE_RANGE_0V_20V] = { + .m = 80, + .c = 0, + }, +}; + +static int _ad5761_spi_write(struct ad5761_state *st, u8 addr, u16 val) +{ + st->data[0].d32 = cpu_to_be32(AD5761_ADDR(addr) | val); + + return spi_write(st->spi, &st->data[0].d8[1], 3); +} + +static int ad5761_spi_write(struct iio_dev *indio_dev, u8 addr, u16 val) +{ + struct ad5761_state *st = iio_priv(indio_dev); + int ret; + + mutex_lock(&indio_dev->mlock); + ret = _ad5761_spi_write(st, addr, val); + mutex_unlock(&indio_dev->mlock); + + return ret; +} + +static int _ad5761_spi_read(struct ad5761_state *st, u8 addr, u16 *val) +{ + int ret; + struct spi_transfer xfers[] = { + { + .tx_buf = &st->data[0].d8[1], + .bits_per_word = 8, + .len = 3, + .cs_change = true, + }, { + .tx_buf = &st->data[1].d8[1], + .rx_buf = &st->data[2].d8[1], + .bits_per_word = 8, + .len = 3, + }, + }; + + st->data[0].d32 = cpu_to_be32(AD5761_ADDR(addr)); + st->data[1].d32 = cpu_to_be32(AD5761_ADDR(AD5761_ADDR_NOOP)); + + ret = spi_sync_transfer(st->spi, xfers, ARRAY_SIZE(xfers)); + + *val = be32_to_cpu(st->data[2].d32); + + return ret; +} + +static int ad5761_spi_read(struct iio_dev *indio_dev, u8 addr, u16 *val) +{ + struct ad5761_state *st = iio_priv(indio_dev); + int ret; + + mutex_lock(&indio_dev->mlock); + ret = _ad5761_spi_read(st, addr, val); + mutex_unlock(&indio_dev->mlock); + + return ret; +} + +static int ad5761_spi_set_range(struct ad5761_state *st, + enum ad5761_voltage_range range) +{ + u16 aux; + int ret; + + aux = (range & 0x7) | AD5761_CTRL_ETS; + + if (st->use_intref) + aux |= AD5761_CTRL_USE_INTVREF; + + ret = _ad5761_spi_write(st, AD5761_ADDR_SW_FULL_RESET, 0); + if (ret) + return ret; + + ret = _ad5761_spi_write(st, AD5761_ADDR_CTRL_WRITE_REG, aux); + if (ret) + return ret; + + st->range = range; + + return 0; +} + +static int ad5761_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long mask) +{ + struct ad5761_state *st; + int ret; + u16 aux; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = ad5761_spi_read(indio_dev, AD5761_ADDR_DAC_READ, &aux); + if (ret) + return ret; + *val = aux >> chan->scan_type.shift; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + st = iio_priv(indio_dev); + *val = st->vref * ad5761_range_params[st->range].m; + *val /= 10; + *val2 = chan->scan_type.realbits; + return IIO_VAL_FRACTIONAL_LOG2; + case IIO_CHAN_INFO_OFFSET: + st = iio_priv(indio_dev); + *val = -(1 << chan->scan_type.realbits); + *val *= ad5761_range_params[st->range].c; + *val /= ad5761_range_params[st->range].m; + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int ad5761_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + u16 aux; + + if (mask != IIO_CHAN_INFO_RAW) + return -EINVAL; + + if (val2 || (val << chan->scan_type.shift) > 0xffff || val < 0) + return -EINVAL; + + aux = val << chan->scan_type.shift; + + return ad5761_spi_write(indio_dev, AD5761_ADDR_DAC_WRITE, aux); +} + +static const struct iio_info ad5761_info = { + .read_raw = &ad5761_read_raw, + .write_raw = &ad5761_write_raw, + .driver_module = THIS_MODULE, +}; + +#define AD5761_CHAN(_bits) { \ + .type = IIO_VOLTAGE, \ + .output = 1, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_OFFSET), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = (_bits), \ + .storagebits = 16, \ + .shift = 16 - (_bits), \ + }, \ +} + +static const struct ad5761_chip_info ad5761_chip_infos[] = { + [ID_AD5721] = { + .int_vref = 0, + .channel = AD5761_CHAN(12), + }, + [ID_AD5721R] = { + .int_vref = 2500, + .channel = AD5761_CHAN(12), + }, + [ID_AD5761] = { + .int_vref = 0, + .channel = AD5761_CHAN(16), + }, + [ID_AD5761R] = { + .int_vref = 2500, + .channel = AD5761_CHAN(16), + }, +}; + +static int ad5761_get_vref(struct ad5761_state *st, + const struct ad5761_chip_info *chip_info) +{ + int ret; + + st->vref_reg = devm_regulator_get_optional(&st->spi->dev, "vref"); + if (PTR_ERR(st->vref_reg) == -ENODEV) { + /* Use Internal regulator */ + if (!chip_info->int_vref) { + dev_err(&st->spi->dev, + "Voltage reference not found\n"); + return -EIO; + } + + st->use_intref = true; + st->vref = chip_info->int_vref; + return 0; + } + + if (IS_ERR(st->vref_reg)) { + dev_err(&st->spi->dev, + "Error getting voltage reference regulator\n"); + return PTR_ERR(st->vref_reg); + } + + ret = regulator_enable(st->vref_reg); + if (ret) { + dev_err(&st->spi->dev, + "Failed to enable voltage reference\n"); + return ret; + } + + ret = regulator_get_voltage(st->vref_reg); + if (ret < 0) { + dev_err(&st->spi->dev, + "Failed to get voltage reference value\n"); + goto disable_regulator_vref; + } + + if (ret < 2000000 || ret > 3000000) { + dev_warn(&st->spi->dev, + "Invalid external voltage ref. value %d uV\n", ret); + ret = -EIO; + goto disable_regulator_vref; + } + + st->vref = ret / 1000; + st->use_intref = false; + + return 0; + +disable_regulator_vref: + regulator_disable(st->vref_reg); + st->vref_reg = NULL; + return ret; +} + +static int ad5761_probe(struct spi_device *spi) +{ + struct iio_dev *iio_dev; + struct ad5761_state *st; + int ret; + const struct ad5761_chip_info *chip_info = + &ad5761_chip_infos[spi_get_device_id(spi)->driver_data]; + enum ad5761_voltage_range voltage_range = AD5761_VOLTAGE_RANGE_0V_5V; + struct ad5761_platform_data *pdata = dev_get_platdata(&spi->dev); + + iio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + if (!iio_dev) + return -ENOMEM; + + st = iio_priv(iio_dev); + + st->spi = spi; + spi_set_drvdata(spi, iio_dev); + + ret = ad5761_get_vref(st, chip_info); + if (ret) + return ret; + + if (pdata) + voltage_range = pdata->voltage_range; + + ret = ad5761_spi_set_range(st, voltage_range); + if (ret) + goto disable_regulator_err; + + iio_dev->dev.parent = &spi->dev; + iio_dev->info = &ad5761_info; + iio_dev->modes = INDIO_DIRECT_MODE; + iio_dev->channels = &chip_info->channel; + iio_dev->num_channels = 1; + iio_dev->name = spi_get_device_id(st->spi)->name; + ret = iio_device_register(iio_dev); + if (ret) + goto disable_regulator_err; + + return 0; + +disable_regulator_err: + if (!IS_ERR_OR_NULL(st->vref_reg)) + regulator_disable(st->vref_reg); + + return ret; +} + +static int ad5761_remove(struct spi_device *spi) +{ + struct iio_dev *iio_dev = spi_get_drvdata(spi); + struct ad5761_state *st = iio_priv(iio_dev); + + iio_device_unregister(iio_dev); + + if (!IS_ERR_OR_NULL(st->vref_reg)) + regulator_disable(st->vref_reg); + + return 0; +} + +static const struct spi_device_id ad5761_id[] = { + {"ad5721", ID_AD5721}, + {"ad5721r", ID_AD5721R}, + {"ad5761", ID_AD5761}, + {"ad5761r", ID_AD5761R}, + {} +}; +MODULE_DEVICE_TABLE(spi, ad5761_id); + +static struct spi_driver ad5761_driver = { + .driver = { + .name = "ad5761", + }, + .probe = ad5761_probe, + .remove = ad5761_remove, + .id_table = ad5761_id, +}; +module_spi_driver(ad5761_driver); + +MODULE_AUTHOR("Ricardo Ribalda <ricardo.ribalda@gmail.com>"); +MODULE_DESCRIPTION("Analog Devices AD5721, AD5721R, AD5761, AD5761R driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/dac/mcp4725.c b/drivers/iio/dac/mcp4725.c index 43d14588448d..cca935c06f2b 100644 --- a/drivers/iio/dac/mcp4725.c +++ b/drivers/iio/dac/mcp4725.c @@ -1,5 +1,5 @@ /* - * mcp4725.c - Support for Microchip MCP4725 + * mcp4725.c - Support for Microchip MCP4725/6 * * Copyright (C) 2012 Peter Meerwald <pmeerw@pmeerw.net> * @@ -134,6 +134,12 @@ static const char * const mcp4725_powerdown_modes[] = { "500kohm_to_gnd" }; +static const char * const mcp4726_powerdown_modes[] = { + "1kohm_to_gnd", + "125kohm_to_gnd", + "640kohm_to_gnd" +}; + static int mcp4725_get_powerdown_mode(struct iio_dev *indio_dev, const struct iio_chan_spec *chan) { @@ -182,11 +188,24 @@ static ssize_t mcp4725_write_powerdown(struct iio_dev *indio_dev, return len; } -static const struct iio_enum mcp4725_powerdown_mode_enum = { - .items = mcp4725_powerdown_modes, - .num_items = ARRAY_SIZE(mcp4725_powerdown_modes), - .get = mcp4725_get_powerdown_mode, - .set = mcp4725_set_powerdown_mode, +enum { + MCP4725, + MCP4726, +}; + +static const struct iio_enum mcp472x_powerdown_mode_enum[] = { + [MCP4725] = { + .items = mcp4725_powerdown_modes, + .num_items = ARRAY_SIZE(mcp4725_powerdown_modes), + .get = mcp4725_get_powerdown_mode, + .set = mcp4725_set_powerdown_mode, + }, + [MCP4726] = { + .items = mcp4726_powerdown_modes, + .num_items = ARRAY_SIZE(mcp4726_powerdown_modes), + .get = mcp4725_get_powerdown_mode, + .set = mcp4725_set_powerdown_mode, + }, }; static const struct iio_chan_spec_ext_info mcp4725_ext_info[] = { @@ -196,19 +215,46 @@ static const struct iio_chan_spec_ext_info mcp4725_ext_info[] = { .write = mcp4725_write_powerdown, .shared = IIO_SEPARATE, }, - IIO_ENUM("powerdown_mode", IIO_SEPARATE, &mcp4725_powerdown_mode_enum), - IIO_ENUM_AVAILABLE("powerdown_mode", &mcp4725_powerdown_mode_enum), + IIO_ENUM("powerdown_mode", IIO_SEPARATE, + &mcp472x_powerdown_mode_enum[MCP4725]), + IIO_ENUM_AVAILABLE("powerdown_mode", + &mcp472x_powerdown_mode_enum[MCP4725]), + { }, +}; + +static const struct iio_chan_spec_ext_info mcp4726_ext_info[] = { + { + .name = "powerdown", + .read = mcp4725_read_powerdown, + .write = mcp4725_write_powerdown, + .shared = IIO_SEPARATE, + }, + IIO_ENUM("powerdown_mode", IIO_SEPARATE, + &mcp472x_powerdown_mode_enum[MCP4726]), + IIO_ENUM_AVAILABLE("powerdown_mode", + &mcp472x_powerdown_mode_enum[MCP4726]), { }, }; -static const struct iio_chan_spec mcp4725_channel = { - .type = IIO_VOLTAGE, - .indexed = 1, - .output = 1, - .channel = 0, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), - .ext_info = mcp4725_ext_info, +static const struct iio_chan_spec mcp472x_channel[] = { + [MCP4725] = { + .type = IIO_VOLTAGE, + .indexed = 1, + .output = 1, + .channel = 0, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .ext_info = mcp4725_ext_info, + }, + [MCP4726] = { + .type = IIO_VOLTAGE, + .indexed = 1, + .output = 1, + .channel = 0, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .ext_info = mcp4726_ext_info, + }, }; static int mcp4725_set_value(struct iio_dev *indio_dev, int val) @@ -300,8 +346,9 @@ static int mcp4725_probe(struct i2c_client *client, data->client = client; indio_dev->dev.parent = &client->dev; + indio_dev->name = id->name; indio_dev->info = &mcp4725_info; - indio_dev->channels = &mcp4725_channel; + indio_dev->channels = &mcp472x_channel[id->driver_data]; indio_dev->num_channels = 1; indio_dev->modes = INDIO_DIRECT_MODE; @@ -315,7 +362,7 @@ static int mcp4725_probe(struct i2c_client *client, } pd = (inbuf[0] >> 1) & 0x3; data->powerdown = pd > 0 ? true : false; - data->powerdown_mode = pd ? pd-1 : 2; /* 500kohm_to_gnd */ + data->powerdown_mode = pd ? pd - 1 : 2; /* largest register to gnd */ data->dac_value = (inbuf[1] << 4) | (inbuf[2] >> 4); return iio_device_register(indio_dev); @@ -328,7 +375,8 @@ static int mcp4725_remove(struct i2c_client *client) } static const struct i2c_device_id mcp4725_id[] = { - { "mcp4725", 0 }, + { "mcp4725", MCP4725 }, + { "mcp4726", MCP4726 }, { } }; MODULE_DEVICE_TABLE(i2c, mcp4725_id); @@ -345,5 +393,5 @@ static struct i2c_driver mcp4725_driver = { module_i2c_driver(mcp4725_driver); MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); -MODULE_DESCRIPTION("MCP4725 12-bit DAC"); +MODULE_DESCRIPTION("MCP4725/6 12-bit DAC"); MODULE_LICENSE("GPL"); diff --git a/drivers/iio/dac/stx104.c b/drivers/iio/dac/stx104.c new file mode 100644 index 000000000000..174f4b75ceed --- /dev/null +++ b/drivers/iio/dac/stx104.c @@ -0,0 +1,152 @@ +/* + * DAC driver for the Apex Embedded Systems STX104 + * Copyright (C) 2016 William Breathitt Gray + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/iio/iio.h> +#include <linux/iio/types.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/isa.h> +#include <linux/module.h> +#include <linux/moduleparam.h> + +#define STX104_NUM_CHAN 2 + +#define STX104_CHAN(chan) { \ + .type = IIO_VOLTAGE, \ + .channel = chan, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .indexed = 1, \ + .output = 1 \ +} + +#define STX104_EXTENT 16 +/** + * The highest base address possible for an ISA device is 0x3FF; this results in + * 1024 possible base addresses. Dividing the number of possible base addresses + * by the address extent taken by each device results in the maximum number of + * devices on a system. + */ +#define MAX_NUM_STX104 (1024 / STX104_EXTENT) + +static unsigned base[MAX_NUM_STX104]; +static unsigned num_stx104; +module_param_array(base, uint, &num_stx104, 0); +MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses"); + +/** + * struct stx104_iio - IIO device private data structure + * @chan_out_states: channels' output states + * @base: base port address of the IIO device + */ +struct stx104_iio { + unsigned chan_out_states[STX104_NUM_CHAN]; + unsigned base; +}; + +static int stx104_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, int *val2, long mask) +{ + struct stx104_iio *const priv = iio_priv(indio_dev); + + if (mask != IIO_CHAN_INFO_RAW) + return -EINVAL; + + *val = priv->chan_out_states[chan->channel]; + + return IIO_VAL_INT; +} + +static int stx104_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, int val2, long mask) +{ + struct stx104_iio *const priv = iio_priv(indio_dev); + const unsigned chan_addr_offset = 2 * chan->channel; + + if (mask != IIO_CHAN_INFO_RAW) + return -EINVAL; + + priv->chan_out_states[chan->channel] = val; + outw(val, priv->base + 4 + chan_addr_offset); + + return 0; +} + +static const struct iio_info stx104_info = { + .driver_module = THIS_MODULE, + .read_raw = stx104_read_raw, + .write_raw = stx104_write_raw +}; + +static const struct iio_chan_spec stx104_channels[STX104_NUM_CHAN] = { + STX104_CHAN(0), + STX104_CHAN(1) +}; + +static int stx104_probe(struct device *dev, unsigned int id) +{ + struct iio_dev *indio_dev; + struct stx104_iio *priv; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); + if (!indio_dev) + return -ENOMEM; + + if (!devm_request_region(dev, base[id], STX104_EXTENT, + dev_name(dev))) { + dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n", + base[id], base[id] + STX104_EXTENT); + return -EBUSY; + } + + indio_dev->info = &stx104_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = stx104_channels; + indio_dev->num_channels = STX104_NUM_CHAN; + indio_dev->name = dev_name(dev); + + priv = iio_priv(indio_dev); + priv->base = base[id]; + + /* initialize DAC output to 0V */ + outw(0, base[id] + 4); + outw(0, base[id] + 6); + + return devm_iio_device_register(dev, indio_dev); +} + +static struct isa_driver stx104_driver = { + .probe = stx104_probe, + .driver = { + .name = "stx104" + } +}; + +static void __exit stx104_exit(void) +{ + isa_unregister_driver(&stx104_driver); +} + +static int __init stx104_init(void) +{ + return isa_register_driver(&stx104_driver, num_stx104); +} + +module_init(stx104_init); +module_exit(stx104_exit); + +MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>"); +MODULE_DESCRIPTION("Apex Embedded Systems STX104 DAC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/dac/vf610_dac.c b/drivers/iio/dac/vf610_dac.c new file mode 100644 index 000000000000..c4ec7779b394 --- /dev/null +++ b/drivers/iio/dac/vf610_dac.c @@ -0,0 +1,298 @@ +/* + * Freescale Vybrid vf610 DAC driver + * + * Copyright 2016 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#define VF610_DACx_STATCTRL 0x20 + +#define VF610_DAC_DACEN BIT(15) +#define VF610_DAC_DACRFS BIT(14) +#define VF610_DAC_LPEN BIT(11) + +#define VF610_DAC_DAT0(x) ((x) & 0xFFF) + +enum vf610_conversion_mode_sel { + VF610_DAC_CONV_HIGH_POWER, + VF610_DAC_CONV_LOW_POWER, +}; + +struct vf610_dac { + struct clk *clk; + struct device *dev; + enum vf610_conversion_mode_sel conv_mode; + void __iomem *regs; +}; + +static void vf610_dac_init(struct vf610_dac *info) +{ + int val; + + info->conv_mode = VF610_DAC_CONV_LOW_POWER; + val = VF610_DAC_DACEN | VF610_DAC_DACRFS | + VF610_DAC_LPEN; + writel(val, info->regs + VF610_DACx_STATCTRL); +} + +static void vf610_dac_exit(struct vf610_dac *info) +{ + int val; + + val = readl(info->regs + VF610_DACx_STATCTRL); + val &= ~VF610_DAC_DACEN; + writel(val, info->regs + VF610_DACx_STATCTRL); +} + +static int vf610_set_conversion_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + unsigned int mode) +{ + struct vf610_dac *info = iio_priv(indio_dev); + int val; + + mutex_lock(&indio_dev->mlock); + info->conv_mode = mode; + val = readl(info->regs + VF610_DACx_STATCTRL); + if (mode) + val |= VF610_DAC_LPEN; + else + val &= ~VF610_DAC_LPEN; + writel(val, info->regs + VF610_DACx_STATCTRL); + mutex_unlock(&indio_dev->mlock); + + return 0; +} + +static int vf610_get_conversion_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct vf610_dac *info = iio_priv(indio_dev); + + return info->conv_mode; +} + +static const char * const vf610_conv_modes[] = { "high-power", "low-power" }; + +static const struct iio_enum vf610_conversion_mode = { + .items = vf610_conv_modes, + .num_items = ARRAY_SIZE(vf610_conv_modes), + .get = vf610_get_conversion_mode, + .set = vf610_set_conversion_mode, +}; + +static const struct iio_chan_spec_ext_info vf610_ext_info[] = { + IIO_ENUM("conversion_mode", IIO_SHARED_BY_DIR, + &vf610_conversion_mode), + {}, +}; + +#define VF610_DAC_CHAN(_chan_type) { \ + .type = (_chan_type), \ + .output = 1, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .ext_info = vf610_ext_info, \ +} + +static const struct iio_chan_spec vf610_dac_iio_channels[] = { + VF610_DAC_CHAN(IIO_VOLTAGE), +}; + +static int vf610_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, + long mask) +{ + struct vf610_dac *info = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + *val = VF610_DAC_DAT0(readl(info->regs)); + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + /* + * DACRFS is always 1 for valid reference and typical + * reference voltage as per Vybrid datasheet is 3.3V + * from section 9.1.2.1 of Vybrid datasheet + */ + *val = 3300 /* mV */; + *val2 = 12; + return IIO_VAL_FRACTIONAL_LOG2; + + default: + return -EINVAL; + } +} + +static int vf610_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, + long mask) +{ + struct vf610_dac *info = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&indio_dev->mlock); + writel(VF610_DAC_DAT0(val), info->regs); + mutex_unlock(&indio_dev->mlock); + return 0; + + default: + return -EINVAL; + } +} + +static const struct iio_info vf610_dac_iio_info = { + .driver_module = THIS_MODULE, + .read_raw = &vf610_read_raw, + .write_raw = &vf610_write_raw, +}; + +static const struct of_device_id vf610_dac_match[] = { + { .compatible = "fsl,vf610-dac", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, vf610_dac_match); + +static int vf610_dac_probe(struct platform_device *pdev) +{ + struct iio_dev *indio_dev; + struct vf610_dac *info; + struct resource *mem; + int ret; + + indio_dev = devm_iio_device_alloc(&pdev->dev, + sizeof(struct vf610_dac)); + if (!indio_dev) { + dev_err(&pdev->dev, "Failed allocating iio device\n"); + return -ENOMEM; + } + + info = iio_priv(indio_dev); + info->dev = &pdev->dev; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + info->regs = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(info->regs)) + return PTR_ERR(info->regs); + + info->clk = devm_clk_get(&pdev->dev, "dac"); + if (IS_ERR(info->clk)) { + dev_err(&pdev->dev, "Failed getting clock, err = %ld\n", + PTR_ERR(info->clk)); + return PTR_ERR(info->clk); + } + + platform_set_drvdata(pdev, indio_dev); + + indio_dev->name = dev_name(&pdev->dev); + indio_dev->dev.parent = &pdev->dev; + indio_dev->dev.of_node = pdev->dev.of_node; + indio_dev->info = &vf610_dac_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = vf610_dac_iio_channels; + indio_dev->num_channels = ARRAY_SIZE(vf610_dac_iio_channels); + + ret = clk_prepare_enable(info->clk); + if (ret) { + dev_err(&pdev->dev, + "Could not prepare or enable the clock\n"); + return ret; + } + + vf610_dac_init(info); + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(&pdev->dev, "Couldn't register the device\n"); + goto error_iio_device_register; + } + + return 0; + +error_iio_device_register: + clk_disable_unprepare(info->clk); + + return ret; +} + +static int vf610_dac_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct vf610_dac *info = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + vf610_dac_exit(info); + clk_disable_unprepare(info->clk); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int vf610_dac_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct vf610_dac *info = iio_priv(indio_dev); + + vf610_dac_exit(info); + clk_disable_unprepare(info->clk); + + return 0; +} + +static int vf610_dac_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct vf610_dac *info = iio_priv(indio_dev); + int ret; + + ret = clk_prepare_enable(info->clk); + if (ret) + return ret; + + vf610_dac_init(info); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(vf610_dac_pm_ops, vf610_dac_suspend, vf610_dac_resume); + +static struct platform_driver vf610_dac_driver = { + .probe = vf610_dac_probe, + .remove = vf610_dac_remove, + .driver = { + .name = "vf610-dac", + .of_match_table = vf610_dac_match, + .pm = &vf610_dac_pm_ops, + }, +}; +module_platform_driver(vf610_dac_driver); + +MODULE_AUTHOR("Sanchayan Maity <sanchayan.maity@toradex.com>"); +MODULE_DESCRIPTION("Freescale VF610 DAC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c index 02eddcebeea3..110f95b6e52f 100644 --- a/drivers/iio/gyro/st_gyro_core.c +++ b/drivers/iio/gyro/st_gyro_core.c @@ -185,6 +185,11 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { .drdy_irq = { .addr = ST_GYRO_1_DRDY_IRQ_ADDR, .mask_int2 = ST_GYRO_1_DRDY_IRQ_INT2_MASK, + /* + * The sensor has IHL (active low) and open + * drain settings, but only for INT1 and not + * for the DRDY line on INT2. + */ }, .multi_read_bit = ST_GYRO_1_MULTIREAD_BIT, .bootime = 2, @@ -248,6 +253,11 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { .drdy_irq = { .addr = ST_GYRO_2_DRDY_IRQ_ADDR, .mask_int2 = ST_GYRO_2_DRDY_IRQ_INT2_MASK, + /* + * The sensor has IHL (active low) and open + * drain settings, but only for INT1 and not + * for the DRDY line on INT2. + */ }, .multi_read_bit = ST_GYRO_2_MULTIREAD_BIT, .bootime = 2, @@ -307,6 +317,11 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { .drdy_irq = { .addr = ST_GYRO_3_DRDY_IRQ_ADDR, .mask_int2 = ST_GYRO_3_DRDY_IRQ_INT2_MASK, + /* + * The sensor has IHL (active low) and open + * drain settings, but only for INT1 and not + * for the DRDY line on INT2. + */ }, .multi_read_bit = ST_GYRO_3_MULTIREAD_BIT, .bootime = 2, diff --git a/drivers/iio/health/Kconfig b/drivers/iio/health/Kconfig index a647679da805..c5f004a8e447 100644 --- a/drivers/iio/health/Kconfig +++ b/drivers/iio/health/Kconfig @@ -3,7 +3,35 @@ # # When adding new entries keep the list in alphabetical order -menu "Health sensors" +menu "Health Sensors" + +menu "Heart Rate Monitors" + +config AFE4403 + tristate "TI AFE4403 Heart Rate Monitor" + depends on SPI_MASTER + select REGMAP_SPI + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes to choose the Texas Instruments AFE4403 + heart rate monitor and low-cost pulse oximeter. + + To compile this driver as a module, choose M here: the + module will be called afe4403. + +config AFE4404 + tristate "TI AFE4404 heart rate and pulse oximeter sensor" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes to choose the Texas Instruments AFE4404 + heart rate monitor and low-cost pulse oximeter. + + To compile this driver as a module, choose M here: the + module will be called afe4404. config MAX30100 tristate "MAX30100 heart rate and pulse oximeter sensor" @@ -19,3 +47,5 @@ config MAX30100 module will be called max30100. endmenu + +endmenu diff --git a/drivers/iio/health/Makefile b/drivers/iio/health/Makefile index 7c475d7faad8..9955a2ae8df1 100644 --- a/drivers/iio/health/Makefile +++ b/drivers/iio/health/Makefile @@ -4,4 +4,6 @@ # When adding new entries keep the list in alphabetical order +obj-$(CONFIG_AFE4403) += afe4403.o +obj-$(CONFIG_AFE4404) += afe4404.o obj-$(CONFIG_MAX30100) += max30100.o diff --git a/drivers/iio/health/afe4403.c b/drivers/iio/health/afe4403.c new file mode 100644 index 000000000000..88e43f87b926 --- /dev/null +++ b/drivers/iio/health/afe4403.c @@ -0,0 +1,708 @@ +/* + * AFE4403 Heart Rate Monitors and Low-Cost Pulse Oximeters + * + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Andrew F. Davis <afd@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <linux/device.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/spi/spi.h> +#include <linux/sysfs.h> +#include <linux/regulator/consumer.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/trigger_consumer.h> + +#include "afe440x.h" + +#define AFE4403_DRIVER_NAME "afe4403" + +/* AFE4403 Registers */ +#define AFE4403_TIAGAIN 0x20 +#define AFE4403_TIA_AMB_GAIN 0x21 + +/* AFE4403 GAIN register fields */ +#define AFE4403_TIAGAIN_RES_MASK GENMASK(2, 0) +#define AFE4403_TIAGAIN_RES_SHIFT 0 +#define AFE4403_TIAGAIN_CAP_MASK GENMASK(7, 3) +#define AFE4403_TIAGAIN_CAP_SHIFT 3 + +/* AFE4403 LEDCNTRL register fields */ +#define AFE440X_LEDCNTRL_LED1_MASK GENMASK(15, 8) +#define AFE440X_LEDCNTRL_LED1_SHIFT 8 +#define AFE440X_LEDCNTRL_LED2_MASK GENMASK(7, 0) +#define AFE440X_LEDCNTRL_LED2_SHIFT 0 +#define AFE440X_LEDCNTRL_LED_RANGE_MASK GENMASK(17, 16) +#define AFE440X_LEDCNTRL_LED_RANGE_SHIFT 16 + +/* AFE4403 CONTROL2 register fields */ +#define AFE440X_CONTROL2_PWR_DWN_TX BIT(2) +#define AFE440X_CONTROL2_EN_SLOW_DIAG BIT(8) +#define AFE440X_CONTROL2_DIAG_OUT_TRI BIT(10) +#define AFE440X_CONTROL2_TX_BRDG_MOD BIT(11) +#define AFE440X_CONTROL2_TX_REF_MASK GENMASK(18, 17) +#define AFE440X_CONTROL2_TX_REF_SHIFT 17 + +/* AFE4404 NULL fields */ +#define NULL_MASK 0 +#define NULL_SHIFT 0 + +/* AFE4403 LEDCNTRL values */ +#define AFE440X_LEDCNTRL_RANGE_TX_HALF 0x1 +#define AFE440X_LEDCNTRL_RANGE_TX_FULL 0x2 +#define AFE440X_LEDCNTRL_RANGE_TX_OFF 0x3 + +/* AFE4403 CONTROL2 values */ +#define AFE440X_CONTROL2_TX_REF_025 0x0 +#define AFE440X_CONTROL2_TX_REF_050 0x1 +#define AFE440X_CONTROL2_TX_REF_100 0x2 +#define AFE440X_CONTROL2_TX_REF_075 0x3 + +/* AFE4403 CONTROL3 values */ +#define AFE440X_CONTROL3_CLK_DIV_2 0x0 +#define AFE440X_CONTROL3_CLK_DIV_4 0x2 +#define AFE440X_CONTROL3_CLK_DIV_6 0x3 +#define AFE440X_CONTROL3_CLK_DIV_8 0x4 +#define AFE440X_CONTROL3_CLK_DIV_12 0x5 +#define AFE440X_CONTROL3_CLK_DIV_1 0x7 + +/* AFE4403 TIAGAIN_CAP values */ +#define AFE4403_TIAGAIN_CAP_5_P 0x0 +#define AFE4403_TIAGAIN_CAP_10_P 0x1 +#define AFE4403_TIAGAIN_CAP_20_P 0x2 +#define AFE4403_TIAGAIN_CAP_30_P 0x3 +#define AFE4403_TIAGAIN_CAP_55_P 0x8 +#define AFE4403_TIAGAIN_CAP_155_P 0x10 + +/* AFE4403 TIAGAIN_RES values */ +#define AFE4403_TIAGAIN_RES_500_K 0x0 +#define AFE4403_TIAGAIN_RES_250_K 0x1 +#define AFE4403_TIAGAIN_RES_100_K 0x2 +#define AFE4403_TIAGAIN_RES_50_K 0x3 +#define AFE4403_TIAGAIN_RES_25_K 0x4 +#define AFE4403_TIAGAIN_RES_10_K 0x5 +#define AFE4403_TIAGAIN_RES_1_M 0x6 +#define AFE4403_TIAGAIN_RES_NONE 0x7 + +/** + * struct afe4403_data + * @dev - Device structure + * @spi - SPI device handle + * @regmap - Register map of the device + * @regulator - Pointer to the regulator for the IC + * @trig - IIO trigger for this device + * @irq - ADC_RDY line interrupt number + */ +struct afe4403_data { + struct device *dev; + struct spi_device *spi; + struct regmap *regmap; + struct regulator *regulator; + struct iio_trigger *trig; + int irq; +}; + +enum afe4403_chan_id { + LED1, + ALED1, + LED2, + ALED2, + LED1_ALED1, + LED2_ALED2, + ILED1, + ILED2, +}; + +static const struct afe440x_reg_info afe4403_reg_info[] = { + [LED1] = AFE440X_REG_INFO(AFE440X_LED1VAL, 0, NULL), + [ALED1] = AFE440X_REG_INFO(AFE440X_ALED1VAL, 0, NULL), + [LED2] = AFE440X_REG_INFO(AFE440X_LED2VAL, 0, NULL), + [ALED2] = AFE440X_REG_INFO(AFE440X_ALED2VAL, 0, NULL), + [LED1_ALED1] = AFE440X_REG_INFO(AFE440X_LED1_ALED1VAL, 0, NULL), + [LED2_ALED2] = AFE440X_REG_INFO(AFE440X_LED2_ALED2VAL, 0, NULL), + [ILED1] = AFE440X_REG_INFO(AFE440X_LEDCNTRL, 0, AFE440X_LEDCNTRL_LED1), + [ILED2] = AFE440X_REG_INFO(AFE440X_LEDCNTRL, 0, AFE440X_LEDCNTRL_LED2), +}; + +static const struct iio_chan_spec afe4403_channels[] = { + /* ADC values */ + AFE440X_INTENSITY_CHAN(LED1, "led1", 0), + AFE440X_INTENSITY_CHAN(ALED1, "led1_ambient", 0), + AFE440X_INTENSITY_CHAN(LED2, "led2", 0), + AFE440X_INTENSITY_CHAN(ALED2, "led2_ambient", 0), + AFE440X_INTENSITY_CHAN(LED1_ALED1, "led1-led1_ambient", 0), + AFE440X_INTENSITY_CHAN(LED2_ALED2, "led2-led2_ambient", 0), + /* LED current */ + AFE440X_CURRENT_CHAN(ILED1, "led1"), + AFE440X_CURRENT_CHAN(ILED2, "led2"), +}; + +static const struct afe440x_val_table afe4403_res_table[] = { + { 500000 }, { 250000 }, { 100000 }, { 50000 }, + { 25000 }, { 10000 }, { 1000000 }, { 0 }, +}; +AFE440X_TABLE_ATTR(tia_resistance_available, afe4403_res_table); + +static const struct afe440x_val_table afe4403_cap_table[] = { + { 0, 5000 }, { 0, 10000 }, { 0, 20000 }, { 0, 25000 }, + { 0, 30000 }, { 0, 35000 }, { 0, 45000 }, { 0, 50000 }, + { 0, 55000 }, { 0, 60000 }, { 0, 70000 }, { 0, 75000 }, + { 0, 80000 }, { 0, 85000 }, { 0, 95000 }, { 0, 100000 }, + { 0, 155000 }, { 0, 160000 }, { 0, 170000 }, { 0, 175000 }, + { 0, 180000 }, { 0, 185000 }, { 0, 195000 }, { 0, 200000 }, + { 0, 205000 }, { 0, 210000 }, { 0, 220000 }, { 0, 225000 }, + { 0, 230000 }, { 0, 235000 }, { 0, 245000 }, { 0, 250000 }, +}; +AFE440X_TABLE_ATTR(tia_capacitance_available, afe4403_cap_table); + +static ssize_t afe440x_show_register(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4403_data *afe = iio_priv(indio_dev); + struct afe440x_attr *afe440x_attr = to_afe440x_attr(attr); + unsigned int reg_val, type; + int vals[2]; + int ret, val_len; + + ret = regmap_read(afe->regmap, afe440x_attr->reg, ®_val); + if (ret) + return ret; + + reg_val &= afe440x_attr->mask; + reg_val >>= afe440x_attr->shift; + + switch (afe440x_attr->type) { + case SIMPLE: + type = IIO_VAL_INT; + val_len = 1; + vals[0] = reg_val; + break; + case RESISTANCE: + case CAPACITANCE: + type = IIO_VAL_INT_PLUS_MICRO; + val_len = 2; + if (reg_val < afe440x_attr->table_size) { + vals[0] = afe440x_attr->val_table[reg_val].integer; + vals[1] = afe440x_attr->val_table[reg_val].fract; + break; + } + return -EINVAL; + default: + return -EINVAL; + } + + return iio_format_value(buf, type, val_len, vals); +} + +static ssize_t afe440x_store_register(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4403_data *afe = iio_priv(indio_dev); + struct afe440x_attr *afe440x_attr = to_afe440x_attr(attr); + int val, integer, fract, ret; + + ret = iio_str_to_fixpoint(buf, 100000, &integer, &fract); + if (ret) + return ret; + + switch (afe440x_attr->type) { + case SIMPLE: + val = integer; + break; + case RESISTANCE: + case CAPACITANCE: + for (val = 0; val < afe440x_attr->table_size; val++) + if (afe440x_attr->val_table[val].integer == integer && + afe440x_attr->val_table[val].fract == fract) + break; + if (val == afe440x_attr->table_size) + return -EINVAL; + break; + default: + return -EINVAL; + } + + ret = regmap_update_bits(afe->regmap, afe440x_attr->reg, + afe440x_attr->mask, + (val << afe440x_attr->shift)); + if (ret) + return ret; + + return count; +} + +static AFE440X_ATTR(tia_separate_en, AFE4403_TIAGAIN, AFE440X_TIAGAIN_ENSEPGAIN, SIMPLE, NULL, 0); + +static AFE440X_ATTR(tia_resistance1, AFE4403_TIAGAIN, AFE4403_TIAGAIN_RES, RESISTANCE, afe4403_res_table, ARRAY_SIZE(afe4403_res_table)); +static AFE440X_ATTR(tia_capacitance1, AFE4403_TIAGAIN, AFE4403_TIAGAIN_CAP, CAPACITANCE, afe4403_cap_table, ARRAY_SIZE(afe4403_cap_table)); + +static AFE440X_ATTR(tia_resistance2, AFE4403_TIA_AMB_GAIN, AFE4403_TIAGAIN_RES, RESISTANCE, afe4403_res_table, ARRAY_SIZE(afe4403_res_table)); +static AFE440X_ATTR(tia_capacitance2, AFE4403_TIA_AMB_GAIN, AFE4403_TIAGAIN_RES, CAPACITANCE, afe4403_cap_table, ARRAY_SIZE(afe4403_cap_table)); + +static struct attribute *afe440x_attributes[] = { + &afe440x_attr_tia_separate_en.dev_attr.attr, + &afe440x_attr_tia_resistance1.dev_attr.attr, + &afe440x_attr_tia_capacitance1.dev_attr.attr, + &afe440x_attr_tia_resistance2.dev_attr.attr, + &afe440x_attr_tia_capacitance2.dev_attr.attr, + &dev_attr_tia_resistance_available.attr, + &dev_attr_tia_capacitance_available.attr, + NULL +}; + +static const struct attribute_group afe440x_attribute_group = { + .attrs = afe440x_attributes +}; + +static int afe4403_read(struct afe4403_data *afe, unsigned int reg, u32 *val) +{ + u8 tx[4] = {AFE440X_CONTROL0, 0x0, 0x0, AFE440X_CONTROL0_READ}; + u8 rx[3]; + int ret; + + /* Enable reading from the device */ + ret = spi_write_then_read(afe->spi, tx, 4, NULL, 0); + if (ret) + return ret; + + ret = spi_write_then_read(afe->spi, ®, 1, rx, 3); + if (ret) + return ret; + + *val = (rx[0] << 16) | + (rx[1] << 8) | + (rx[2]); + + /* Disable reading from the device */ + tx[3] = AFE440X_CONTROL0_WRITE; + ret = spi_write_then_read(afe->spi, tx, 4, NULL, 0); + if (ret) + return ret; + + return 0; +} + +static int afe4403_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct afe4403_data *afe = iio_priv(indio_dev); + const struct afe440x_reg_info reg_info = afe4403_reg_info[chan->address]; + int ret; + + switch (chan->type) { + case IIO_INTENSITY: + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = afe4403_read(afe, reg_info.reg, val); + if (ret) + return ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_OFFSET: + ret = regmap_read(afe->regmap, reg_info.offreg, + val); + if (ret) + return ret; + *val &= reg_info.mask; + *val >>= reg_info.shift; + return IIO_VAL_INT; + } + break; + case IIO_CURRENT: + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = regmap_read(afe->regmap, reg_info.reg, val); + if (ret) + return ret; + *val &= reg_info.mask; + *val >>= reg_info.shift; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = 800000; + return IIO_VAL_INT_PLUS_MICRO; + } + break; + default: + break; + } + + return -EINVAL; +} + +static int afe4403_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct afe4403_data *afe = iio_priv(indio_dev); + const struct afe440x_reg_info reg_info = afe4403_reg_info[chan->address]; + + switch (chan->type) { + case IIO_INTENSITY: + switch (mask) { + case IIO_CHAN_INFO_OFFSET: + return regmap_update_bits(afe->regmap, + reg_info.offreg, + reg_info.mask, + (val << reg_info.shift)); + } + break; + case IIO_CURRENT: + switch (mask) { + case IIO_CHAN_INFO_RAW: + return regmap_update_bits(afe->regmap, + reg_info.reg, + reg_info.mask, + (val << reg_info.shift)); + } + break; + default: + break; + } + + return -EINVAL; +} + +static const struct iio_info afe4403_iio_info = { + .attrs = &afe440x_attribute_group, + .read_raw = afe4403_read_raw, + .write_raw = afe4403_write_raw, + .driver_module = THIS_MODULE, +}; + +static irqreturn_t afe4403_trigger_handler(int irq, void *private) +{ + struct iio_poll_func *pf = private; + struct iio_dev *indio_dev = pf->indio_dev; + struct afe4403_data *afe = iio_priv(indio_dev); + int ret, bit, i = 0; + s32 buffer[8]; + u8 tx[4] = {AFE440X_CONTROL0, 0x0, 0x0, AFE440X_CONTROL0_READ}; + u8 rx[3]; + + /* Enable reading from the device */ + ret = spi_write_then_read(afe->spi, tx, 4, NULL, 0); + if (ret) + goto err; + + for_each_set_bit(bit, indio_dev->active_scan_mask, + indio_dev->masklength) { + ret = spi_write_then_read(afe->spi, + &afe4403_reg_info[bit].reg, 1, + rx, 3); + if (ret) + goto err; + + buffer[i++] = (rx[0] << 16) | + (rx[1] << 8) | + (rx[2]); + } + + /* Disable reading from the device */ + tx[3] = AFE440X_CONTROL0_WRITE; + ret = spi_write_then_read(afe->spi, tx, 4, NULL, 0); + if (ret) + goto err; + + iio_push_to_buffers_with_timestamp(indio_dev, buffer, pf->timestamp); +err: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static const struct iio_trigger_ops afe4403_trigger_ops = { + .owner = THIS_MODULE, +}; + +#define AFE4403_TIMING_PAIRS \ + { AFE440X_LED2STC, 0x000050 }, \ + { AFE440X_LED2ENDC, 0x0003e7 }, \ + { AFE440X_LED1LEDSTC, 0x0007d0 }, \ + { AFE440X_LED1LEDENDC, 0x000bb7 }, \ + { AFE440X_ALED2STC, 0x000438 }, \ + { AFE440X_ALED2ENDC, 0x0007cf }, \ + { AFE440X_LED1STC, 0x000820 }, \ + { AFE440X_LED1ENDC, 0x000bb7 }, \ + { AFE440X_LED2LEDSTC, 0x000000 }, \ + { AFE440X_LED2LEDENDC, 0x0003e7 }, \ + { AFE440X_ALED1STC, 0x000c08 }, \ + { AFE440X_ALED1ENDC, 0x000f9f }, \ + { AFE440X_LED2CONVST, 0x0003ef }, \ + { AFE440X_LED2CONVEND, 0x0007cf }, \ + { AFE440X_ALED2CONVST, 0x0007d7 }, \ + { AFE440X_ALED2CONVEND, 0x000bb7 }, \ + { AFE440X_LED1CONVST, 0x000bbf }, \ + { AFE440X_LED1CONVEND, 0x009c3f }, \ + { AFE440X_ALED1CONVST, 0x000fa7 }, \ + { AFE440X_ALED1CONVEND, 0x001387 }, \ + { AFE440X_ADCRSTSTCT0, 0x0003e8 }, \ + { AFE440X_ADCRSTENDCT0, 0x0003eb }, \ + { AFE440X_ADCRSTSTCT1, 0x0007d0 }, \ + { AFE440X_ADCRSTENDCT1, 0x0007d3 }, \ + { AFE440X_ADCRSTSTCT2, 0x000bb8 }, \ + { AFE440X_ADCRSTENDCT2, 0x000bbb }, \ + { AFE440X_ADCRSTSTCT3, 0x000fa0 }, \ + { AFE440X_ADCRSTENDCT3, 0x000fa3 }, \ + { AFE440X_PRPCOUNT, 0x009c3f }, \ + { AFE440X_PDNCYCLESTC, 0x001518 }, \ + { AFE440X_PDNCYCLEENDC, 0x00991f } + +static const struct reg_sequence afe4403_reg_sequences[] = { + AFE4403_TIMING_PAIRS, + { AFE440X_CONTROL1, AFE440X_CONTROL1_TIMEREN | 0x000007}, + { AFE4403_TIA_AMB_GAIN, AFE4403_TIAGAIN_RES_1_M }, + { AFE440X_LEDCNTRL, (0x14 << AFE440X_LEDCNTRL_LED1_SHIFT) | + (0x14 << AFE440X_LEDCNTRL_LED2_SHIFT) }, + { AFE440X_CONTROL2, AFE440X_CONTROL2_TX_REF_050 << + AFE440X_CONTROL2_TX_REF_SHIFT }, +}; + +static const struct regmap_range afe4403_yes_ranges[] = { + regmap_reg_range(AFE440X_LED2VAL, AFE440X_LED1_ALED1VAL), +}; + +static const struct regmap_access_table afe4403_volatile_table = { + .yes_ranges = afe4403_yes_ranges, + .n_yes_ranges = ARRAY_SIZE(afe4403_yes_ranges), +}; + +static const struct regmap_config afe4403_regmap_config = { + .reg_bits = 8, + .val_bits = 24, + + .max_register = AFE440X_PDNCYCLEENDC, + .cache_type = REGCACHE_RBTREE, + .volatile_table = &afe4403_volatile_table, +}; + +#ifdef CONFIG_OF +static const struct of_device_id afe4403_of_match[] = { + { .compatible = "ti,afe4403", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, afe4403_of_match); +#endif + +static int __maybe_unused afe4403_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4403_data *afe = iio_priv(indio_dev); + int ret; + + ret = regmap_update_bits(afe->regmap, AFE440X_CONTROL2, + AFE440X_CONTROL2_PDN_AFE, + AFE440X_CONTROL2_PDN_AFE); + if (ret) + return ret; + + ret = regulator_disable(afe->regulator); + if (ret) { + dev_err(dev, "Unable to disable regulator\n"); + return ret; + } + + return 0; +} + +static int __maybe_unused afe4403_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4403_data *afe = iio_priv(indio_dev); + int ret; + + ret = regulator_enable(afe->regulator); + if (ret) { + dev_err(dev, "Unable to enable regulator\n"); + return ret; + } + + ret = regmap_update_bits(afe->regmap, AFE440X_CONTROL2, + AFE440X_CONTROL2_PDN_AFE, 0); + if (ret) + return ret; + + return 0; +} + +static SIMPLE_DEV_PM_OPS(afe4403_pm_ops, afe4403_suspend, afe4403_resume); + +static int afe4403_probe(struct spi_device *spi) +{ + struct iio_dev *indio_dev; + struct afe4403_data *afe; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*afe)); + if (!indio_dev) + return -ENOMEM; + + afe = iio_priv(indio_dev); + spi_set_drvdata(spi, indio_dev); + + afe->dev = &spi->dev; + afe->spi = spi; + afe->irq = spi->irq; + + afe->regmap = devm_regmap_init_spi(spi, &afe4403_regmap_config); + if (IS_ERR(afe->regmap)) { + dev_err(afe->dev, "Unable to allocate register map\n"); + return PTR_ERR(afe->regmap); + } + + afe->regulator = devm_regulator_get(afe->dev, "tx_sup"); + if (IS_ERR(afe->regulator)) { + dev_err(afe->dev, "Unable to get regulator\n"); + return PTR_ERR(afe->regulator); + } + ret = regulator_enable(afe->regulator); + if (ret) { + dev_err(afe->dev, "Unable to enable regulator\n"); + return ret; + } + + ret = regmap_write(afe->regmap, AFE440X_CONTROL0, + AFE440X_CONTROL0_SW_RESET); + if (ret) { + dev_err(afe->dev, "Unable to reset device\n"); + goto err_disable_reg; + } + + ret = regmap_multi_reg_write(afe->regmap, afe4403_reg_sequences, + ARRAY_SIZE(afe4403_reg_sequences)); + if (ret) { + dev_err(afe->dev, "Unable to set register defaults\n"); + goto err_disable_reg; + } + + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->dev.parent = afe->dev; + indio_dev->channels = afe4403_channels; + indio_dev->num_channels = ARRAY_SIZE(afe4403_channels); + indio_dev->name = AFE4403_DRIVER_NAME; + indio_dev->info = &afe4403_iio_info; + + if (afe->irq > 0) { + afe->trig = devm_iio_trigger_alloc(afe->dev, + "%s-dev%d", + indio_dev->name, + indio_dev->id); + if (!afe->trig) { + dev_err(afe->dev, "Unable to allocate IIO trigger\n"); + ret = -ENOMEM; + goto err_disable_reg; + } + + iio_trigger_set_drvdata(afe->trig, indio_dev); + + afe->trig->ops = &afe4403_trigger_ops; + afe->trig->dev.parent = afe->dev; + + ret = iio_trigger_register(afe->trig); + if (ret) { + dev_err(afe->dev, "Unable to register IIO trigger\n"); + goto err_disable_reg; + } + + ret = devm_request_threaded_irq(afe->dev, afe->irq, + iio_trigger_generic_data_rdy_poll, + NULL, IRQF_ONESHOT, + AFE4403_DRIVER_NAME, + afe->trig); + if (ret) { + dev_err(afe->dev, "Unable to request IRQ\n"); + goto err_trig; + } + } + + ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + afe4403_trigger_handler, NULL); + if (ret) { + dev_err(afe->dev, "Unable to setup buffer\n"); + goto err_trig; + } + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(afe->dev, "Unable to register IIO device\n"); + goto err_buff; + } + + return 0; + +err_buff: + iio_triggered_buffer_cleanup(indio_dev); +err_trig: + if (afe->irq > 0) + iio_trigger_unregister(afe->trig); +err_disable_reg: + regulator_disable(afe->regulator); + + return ret; +} + +static int afe4403_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = spi_get_drvdata(spi); + struct afe4403_data *afe = iio_priv(indio_dev); + int ret; + + iio_device_unregister(indio_dev); + + iio_triggered_buffer_cleanup(indio_dev); + + if (afe->irq > 0) + iio_trigger_unregister(afe->trig); + + ret = regulator_disable(afe->regulator); + if (ret) { + dev_err(afe->dev, "Unable to disable regulator\n"); + return ret; + } + + return 0; +} + +static const struct spi_device_id afe4403_ids[] = { + { "afe4403", 0 }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(spi, afe4403_ids); + +static struct spi_driver afe4403_spi_driver = { + .driver = { + .name = AFE4403_DRIVER_NAME, + .of_match_table = of_match_ptr(afe4403_of_match), + .pm = &afe4403_pm_ops, + }, + .probe = afe4403_probe, + .remove = afe4403_remove, + .id_table = afe4403_ids, +}; +module_spi_driver(afe4403_spi_driver); + +MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>"); +MODULE_DESCRIPTION("TI AFE4403 Heart Rate and Pulse Oximeter"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/health/afe4404.c b/drivers/iio/health/afe4404.c new file mode 100644 index 000000000000..5096a4643784 --- /dev/null +++ b/drivers/iio/health/afe4404.c @@ -0,0 +1,679 @@ +/* + * AFE4404 Heart Rate Monitors and Low-Cost Pulse Oximeters + * + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Andrew F. Davis <afd@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <linux/device.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/sysfs.h> +#include <linux/regulator/consumer.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/trigger_consumer.h> + +#include "afe440x.h" + +#define AFE4404_DRIVER_NAME "afe4404" + +/* AFE4404 registers */ +#define AFE4404_TIA_GAIN_SEP 0x20 +#define AFE4404_TIA_GAIN 0x21 +#define AFE4404_PROG_TG_STC 0x34 +#define AFE4404_PROG_TG_ENDC 0x35 +#define AFE4404_LED3LEDSTC 0x36 +#define AFE4404_LED3LEDENDC 0x37 +#define AFE4404_CLKDIV_PRF 0x39 +#define AFE4404_OFFDAC 0x3a +#define AFE4404_DEC 0x3d +#define AFE4404_AVG_LED2_ALED2VAL 0x3f +#define AFE4404_AVG_LED1_ALED1VAL 0x40 + +/* AFE4404 GAIN register fields */ +#define AFE4404_TIA_GAIN_RES_MASK GENMASK(2, 0) +#define AFE4404_TIA_GAIN_RES_SHIFT 0 +#define AFE4404_TIA_GAIN_CAP_MASK GENMASK(5, 3) +#define AFE4404_TIA_GAIN_CAP_SHIFT 3 + +/* AFE4404 LEDCNTRL register fields */ +#define AFE4404_LEDCNTRL_ILED1_MASK GENMASK(5, 0) +#define AFE4404_LEDCNTRL_ILED1_SHIFT 0 +#define AFE4404_LEDCNTRL_ILED2_MASK GENMASK(11, 6) +#define AFE4404_LEDCNTRL_ILED2_SHIFT 6 +#define AFE4404_LEDCNTRL_ILED3_MASK GENMASK(17, 12) +#define AFE4404_LEDCNTRL_ILED3_SHIFT 12 + +/* AFE4404 CONTROL2 register fields */ +#define AFE440X_CONTROL2_ILED_2X_MASK BIT(17) +#define AFE440X_CONTROL2_ILED_2X_SHIFT 17 + +/* AFE4404 CONTROL3 register fields */ +#define AFE440X_CONTROL3_OSC_ENABLE BIT(9) + +/* AFE4404 OFFDAC register current fields */ +#define AFE4404_OFFDAC_CURR_LED1_MASK GENMASK(9, 5) +#define AFE4404_OFFDAC_CURR_LED1_SHIFT 5 +#define AFE4404_OFFDAC_CURR_LED2_MASK GENMASK(19, 15) +#define AFE4404_OFFDAC_CURR_LED2_SHIFT 15 +#define AFE4404_OFFDAC_CURR_LED3_MASK GENMASK(4, 0) +#define AFE4404_OFFDAC_CURR_LED3_SHIFT 0 +#define AFE4404_OFFDAC_CURR_ALED1_MASK GENMASK(14, 10) +#define AFE4404_OFFDAC_CURR_ALED1_SHIFT 10 +#define AFE4404_OFFDAC_CURR_ALED2_MASK GENMASK(4, 0) +#define AFE4404_OFFDAC_CURR_ALED2_SHIFT 0 + +/* AFE4404 NULL fields */ +#define NULL_MASK 0 +#define NULL_SHIFT 0 + +/* AFE4404 TIA_GAIN_CAP values */ +#define AFE4404_TIA_GAIN_CAP_5_P 0x0 +#define AFE4404_TIA_GAIN_CAP_2_5_P 0x1 +#define AFE4404_TIA_GAIN_CAP_10_P 0x2 +#define AFE4404_TIA_GAIN_CAP_7_5_P 0x3 +#define AFE4404_TIA_GAIN_CAP_20_P 0x4 +#define AFE4404_TIA_GAIN_CAP_17_5_P 0x5 +#define AFE4404_TIA_GAIN_CAP_25_P 0x6 +#define AFE4404_TIA_GAIN_CAP_22_5_P 0x7 + +/* AFE4404 TIA_GAIN_RES values */ +#define AFE4404_TIA_GAIN_RES_500_K 0x0 +#define AFE4404_TIA_GAIN_RES_250_K 0x1 +#define AFE4404_TIA_GAIN_RES_100_K 0x2 +#define AFE4404_TIA_GAIN_RES_50_K 0x3 +#define AFE4404_TIA_GAIN_RES_25_K 0x4 +#define AFE4404_TIA_GAIN_RES_10_K 0x5 +#define AFE4404_TIA_GAIN_RES_1_M 0x6 +#define AFE4404_TIA_GAIN_RES_2_M 0x7 + +/** + * struct afe4404_data + * @dev - Device structure + * @regmap - Register map of the device + * @regulator - Pointer to the regulator for the IC + * @trig - IIO trigger for this device + * @irq - ADC_RDY line interrupt number + */ +struct afe4404_data { + struct device *dev; + struct regmap *regmap; + struct regulator *regulator; + struct iio_trigger *trig; + int irq; +}; + +enum afe4404_chan_id { + LED1, + ALED1, + LED2, + ALED2, + LED3, + LED1_ALED1, + LED2_ALED2, + ILED1, + ILED2, + ILED3, +}; + +static const struct afe440x_reg_info afe4404_reg_info[] = { + [LED1] = AFE440X_REG_INFO(AFE440X_LED1VAL, AFE4404_OFFDAC, AFE4404_OFFDAC_CURR_LED1), + [ALED1] = AFE440X_REG_INFO(AFE440X_ALED1VAL, AFE4404_OFFDAC, AFE4404_OFFDAC_CURR_ALED1), + [LED2] = AFE440X_REG_INFO(AFE440X_LED2VAL, AFE4404_OFFDAC, AFE4404_OFFDAC_CURR_LED2), + [ALED2] = AFE440X_REG_INFO(AFE440X_ALED2VAL, AFE4404_OFFDAC, AFE4404_OFFDAC_CURR_ALED2), + [LED3] = AFE440X_REG_INFO(AFE440X_ALED2VAL, 0, NULL), + [LED1_ALED1] = AFE440X_REG_INFO(AFE440X_LED1_ALED1VAL, 0, NULL), + [LED2_ALED2] = AFE440X_REG_INFO(AFE440X_LED2_ALED2VAL, 0, NULL), + [ILED1] = AFE440X_REG_INFO(AFE440X_LEDCNTRL, 0, AFE4404_LEDCNTRL_ILED1), + [ILED2] = AFE440X_REG_INFO(AFE440X_LEDCNTRL, 0, AFE4404_LEDCNTRL_ILED2), + [ILED3] = AFE440X_REG_INFO(AFE440X_LEDCNTRL, 0, AFE4404_LEDCNTRL_ILED3), +}; + +static const struct iio_chan_spec afe4404_channels[] = { + /* ADC values */ + AFE440X_INTENSITY_CHAN(LED1, "led1", BIT(IIO_CHAN_INFO_OFFSET)), + AFE440X_INTENSITY_CHAN(ALED1, "led1_ambient", BIT(IIO_CHAN_INFO_OFFSET)), + AFE440X_INTENSITY_CHAN(LED2, "led2", BIT(IIO_CHAN_INFO_OFFSET)), + AFE440X_INTENSITY_CHAN(ALED2, "led2_ambient", BIT(IIO_CHAN_INFO_OFFSET)), + AFE440X_INTENSITY_CHAN(LED3, "led3", BIT(IIO_CHAN_INFO_OFFSET)), + AFE440X_INTENSITY_CHAN(LED1_ALED1, "led1-led1_ambient", 0), + AFE440X_INTENSITY_CHAN(LED2_ALED2, "led2-led2_ambient", 0), + /* LED current */ + AFE440X_CURRENT_CHAN(ILED1, "led1"), + AFE440X_CURRENT_CHAN(ILED2, "led2"), + AFE440X_CURRENT_CHAN(ILED3, "led3"), +}; + +static const struct afe440x_val_table afe4404_res_table[] = { + { .integer = 500000, .fract = 0 }, + { .integer = 250000, .fract = 0 }, + { .integer = 100000, .fract = 0 }, + { .integer = 50000, .fract = 0 }, + { .integer = 25000, .fract = 0 }, + { .integer = 10000, .fract = 0 }, + { .integer = 1000000, .fract = 0 }, + { .integer = 2000000, .fract = 0 }, +}; +AFE440X_TABLE_ATTR(tia_resistance_available, afe4404_res_table); + +static const struct afe440x_val_table afe4404_cap_table[] = { + { .integer = 0, .fract = 5000 }, + { .integer = 0, .fract = 2500 }, + { .integer = 0, .fract = 10000 }, + { .integer = 0, .fract = 7500 }, + { .integer = 0, .fract = 20000 }, + { .integer = 0, .fract = 17500 }, + { .integer = 0, .fract = 25000 }, + { .integer = 0, .fract = 22500 }, +}; +AFE440X_TABLE_ATTR(tia_capacitance_available, afe4404_cap_table); + +static ssize_t afe440x_show_register(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4404_data *afe = iio_priv(indio_dev); + struct afe440x_attr *afe440x_attr = to_afe440x_attr(attr); + unsigned int reg_val, type; + int vals[2]; + int ret, val_len; + + ret = regmap_read(afe->regmap, afe440x_attr->reg, ®_val); + if (ret) + return ret; + + reg_val &= afe440x_attr->mask; + reg_val >>= afe440x_attr->shift; + + switch (afe440x_attr->type) { + case SIMPLE: + type = IIO_VAL_INT; + val_len = 1; + vals[0] = reg_val; + break; + case RESISTANCE: + case CAPACITANCE: + type = IIO_VAL_INT_PLUS_MICRO; + val_len = 2; + if (reg_val < afe440x_attr->table_size) { + vals[0] = afe440x_attr->val_table[reg_val].integer; + vals[1] = afe440x_attr->val_table[reg_val].fract; + break; + } + return -EINVAL; + default: + return -EINVAL; + } + + return iio_format_value(buf, type, val_len, vals); +} + +static ssize_t afe440x_store_register(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4404_data *afe = iio_priv(indio_dev); + struct afe440x_attr *afe440x_attr = to_afe440x_attr(attr); + int val, integer, fract, ret; + + ret = iio_str_to_fixpoint(buf, 100000, &integer, &fract); + if (ret) + return ret; + + switch (afe440x_attr->type) { + case SIMPLE: + val = integer; + break; + case RESISTANCE: + case CAPACITANCE: + for (val = 0; val < afe440x_attr->table_size; val++) + if (afe440x_attr->val_table[val].integer == integer && + afe440x_attr->val_table[val].fract == fract) + break; + if (val == afe440x_attr->table_size) + return -EINVAL; + break; + default: + return -EINVAL; + } + + ret = regmap_update_bits(afe->regmap, afe440x_attr->reg, + afe440x_attr->mask, + (val << afe440x_attr->shift)); + if (ret) + return ret; + + return count; +} + +static AFE440X_ATTR(tia_separate_en, AFE4404_TIA_GAIN_SEP, AFE440X_TIAGAIN_ENSEPGAIN, SIMPLE, NULL, 0); + +static AFE440X_ATTR(tia_resistance1, AFE4404_TIA_GAIN, AFE4404_TIA_GAIN_RES, RESISTANCE, afe4404_res_table, ARRAY_SIZE(afe4404_res_table)); +static AFE440X_ATTR(tia_capacitance1, AFE4404_TIA_GAIN, AFE4404_TIA_GAIN_CAP, CAPACITANCE, afe4404_cap_table, ARRAY_SIZE(afe4404_cap_table)); + +static AFE440X_ATTR(tia_resistance2, AFE4404_TIA_GAIN_SEP, AFE4404_TIA_GAIN_RES, RESISTANCE, afe4404_res_table, ARRAY_SIZE(afe4404_res_table)); +static AFE440X_ATTR(tia_capacitance2, AFE4404_TIA_GAIN_SEP, AFE4404_TIA_GAIN_CAP, CAPACITANCE, afe4404_cap_table, ARRAY_SIZE(afe4404_cap_table)); + +static struct attribute *afe440x_attributes[] = { + &afe440x_attr_tia_separate_en.dev_attr.attr, + &afe440x_attr_tia_resistance1.dev_attr.attr, + &afe440x_attr_tia_capacitance1.dev_attr.attr, + &afe440x_attr_tia_resistance2.dev_attr.attr, + &afe440x_attr_tia_capacitance2.dev_attr.attr, + &dev_attr_tia_resistance_available.attr, + &dev_attr_tia_capacitance_available.attr, + NULL +}; + +static const struct attribute_group afe440x_attribute_group = { + .attrs = afe440x_attributes +}; + +static int afe4404_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct afe4404_data *afe = iio_priv(indio_dev); + const struct afe440x_reg_info reg_info = afe4404_reg_info[chan->address]; + int ret; + + switch (chan->type) { + case IIO_INTENSITY: + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = regmap_read(afe->regmap, reg_info.reg, val); + if (ret) + return ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_OFFSET: + ret = regmap_read(afe->regmap, reg_info.offreg, + val); + if (ret) + return ret; + *val &= reg_info.mask; + *val >>= reg_info.shift; + return IIO_VAL_INT; + } + break; + case IIO_CURRENT: + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = regmap_read(afe->regmap, reg_info.reg, val); + if (ret) + return ret; + *val &= reg_info.mask; + *val >>= reg_info.shift; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = 800000; + return IIO_VAL_INT_PLUS_MICRO; + } + break; + default: + break; + } + + return -EINVAL; +} + +static int afe4404_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct afe4404_data *afe = iio_priv(indio_dev); + const struct afe440x_reg_info reg_info = afe4404_reg_info[chan->address]; + + switch (chan->type) { + case IIO_INTENSITY: + switch (mask) { + case IIO_CHAN_INFO_OFFSET: + return regmap_update_bits(afe->regmap, + reg_info.offreg, + reg_info.mask, + (val << reg_info.shift)); + } + break; + case IIO_CURRENT: + switch (mask) { + case IIO_CHAN_INFO_RAW: + return regmap_update_bits(afe->regmap, + reg_info.reg, + reg_info.mask, + (val << reg_info.shift)); + } + break; + default: + break; + } + + return -EINVAL; +} + +static const struct iio_info afe4404_iio_info = { + .attrs = &afe440x_attribute_group, + .read_raw = afe4404_read_raw, + .write_raw = afe4404_write_raw, + .driver_module = THIS_MODULE, +}; + +static irqreturn_t afe4404_trigger_handler(int irq, void *private) +{ + struct iio_poll_func *pf = private; + struct iio_dev *indio_dev = pf->indio_dev; + struct afe4404_data *afe = iio_priv(indio_dev); + int ret, bit, i = 0; + s32 buffer[10]; + + for_each_set_bit(bit, indio_dev->active_scan_mask, + indio_dev->masklength) { + ret = regmap_read(afe->regmap, afe4404_reg_info[bit].reg, + &buffer[i++]); + if (ret) + goto err; + } + + iio_push_to_buffers_with_timestamp(indio_dev, buffer, pf->timestamp); +err: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static const struct iio_trigger_ops afe4404_trigger_ops = { + .owner = THIS_MODULE, +}; + +/* Default timings from data-sheet */ +#define AFE4404_TIMING_PAIRS \ + { AFE440X_PRPCOUNT, 39999 }, \ + { AFE440X_LED2LEDSTC, 0 }, \ + { AFE440X_LED2LEDENDC, 398 }, \ + { AFE440X_LED2STC, 80 }, \ + { AFE440X_LED2ENDC, 398 }, \ + { AFE440X_ADCRSTSTCT0, 5600 }, \ + { AFE440X_ADCRSTENDCT0, 5606 }, \ + { AFE440X_LED2CONVST, 5607 }, \ + { AFE440X_LED2CONVEND, 6066 }, \ + { AFE4404_LED3LEDSTC, 400 }, \ + { AFE4404_LED3LEDENDC, 798 }, \ + { AFE440X_ALED2STC, 480 }, \ + { AFE440X_ALED2ENDC, 798 }, \ + { AFE440X_ADCRSTSTCT1, 6068 }, \ + { AFE440X_ADCRSTENDCT1, 6074 }, \ + { AFE440X_ALED2CONVST, 6075 }, \ + { AFE440X_ALED2CONVEND, 6534 }, \ + { AFE440X_LED1LEDSTC, 800 }, \ + { AFE440X_LED1LEDENDC, 1198 }, \ + { AFE440X_LED1STC, 880 }, \ + { AFE440X_LED1ENDC, 1198 }, \ + { AFE440X_ADCRSTSTCT2, 6536 }, \ + { AFE440X_ADCRSTENDCT2, 6542 }, \ + { AFE440X_LED1CONVST, 6543 }, \ + { AFE440X_LED1CONVEND, 7003 }, \ + { AFE440X_ALED1STC, 1280 }, \ + { AFE440X_ALED1ENDC, 1598 }, \ + { AFE440X_ADCRSTSTCT3, 7005 }, \ + { AFE440X_ADCRSTENDCT3, 7011 }, \ + { AFE440X_ALED1CONVST, 7012 }, \ + { AFE440X_ALED1CONVEND, 7471 }, \ + { AFE440X_PDNCYCLESTC, 7671 }, \ + { AFE440X_PDNCYCLEENDC, 39199 } + +static const struct reg_sequence afe4404_reg_sequences[] = { + AFE4404_TIMING_PAIRS, + { AFE440X_CONTROL1, AFE440X_CONTROL1_TIMEREN }, + { AFE4404_TIA_GAIN, AFE4404_TIA_GAIN_RES_50_K }, + { AFE440X_LEDCNTRL, (0xf << AFE4404_LEDCNTRL_ILED1_SHIFT) | + (0x3 << AFE4404_LEDCNTRL_ILED2_SHIFT) | + (0x3 << AFE4404_LEDCNTRL_ILED3_SHIFT) }, + { AFE440X_CONTROL2, AFE440X_CONTROL3_OSC_ENABLE }, +}; + +static const struct regmap_range afe4404_yes_ranges[] = { + regmap_reg_range(AFE440X_LED2VAL, AFE440X_LED1_ALED1VAL), + regmap_reg_range(AFE4404_AVG_LED2_ALED2VAL, AFE4404_AVG_LED1_ALED1VAL), +}; + +static const struct regmap_access_table afe4404_volatile_table = { + .yes_ranges = afe4404_yes_ranges, + .n_yes_ranges = ARRAY_SIZE(afe4404_yes_ranges), +}; + +static const struct regmap_config afe4404_regmap_config = { + .reg_bits = 8, + .val_bits = 24, + + .max_register = AFE4404_AVG_LED1_ALED1VAL, + .cache_type = REGCACHE_RBTREE, + .volatile_table = &afe4404_volatile_table, +}; + +#ifdef CONFIG_OF +static const struct of_device_id afe4404_of_match[] = { + { .compatible = "ti,afe4404", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, afe4404_of_match); +#endif + +static int __maybe_unused afe4404_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4404_data *afe = iio_priv(indio_dev); + int ret; + + ret = regmap_update_bits(afe->regmap, AFE440X_CONTROL2, + AFE440X_CONTROL2_PDN_AFE, + AFE440X_CONTROL2_PDN_AFE); + if (ret) + return ret; + + ret = regulator_disable(afe->regulator); + if (ret) { + dev_err(dev, "Unable to disable regulator\n"); + return ret; + } + + return 0; +} + +static int __maybe_unused afe4404_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct afe4404_data *afe = iio_priv(indio_dev); + int ret; + + ret = regulator_enable(afe->regulator); + if (ret) { + dev_err(dev, "Unable to enable regulator\n"); + return ret; + } + + ret = regmap_update_bits(afe->regmap, AFE440X_CONTROL2, + AFE440X_CONTROL2_PDN_AFE, 0); + if (ret) + return ret; + + return 0; +} + +static SIMPLE_DEV_PM_OPS(afe4404_pm_ops, afe4404_suspend, afe4404_resume); + +static int afe4404_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct iio_dev *indio_dev; + struct afe4404_data *afe; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*afe)); + if (!indio_dev) + return -ENOMEM; + + afe = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + + afe->dev = &client->dev; + afe->irq = client->irq; + + afe->regmap = devm_regmap_init_i2c(client, &afe4404_regmap_config); + if (IS_ERR(afe->regmap)) { + dev_err(afe->dev, "Unable to allocate register map\n"); + return PTR_ERR(afe->regmap); + } + + afe->regulator = devm_regulator_get(afe->dev, "tx_sup"); + if (IS_ERR(afe->regulator)) { + dev_err(afe->dev, "Unable to get regulator\n"); + return PTR_ERR(afe->regulator); + } + ret = regulator_enable(afe->regulator); + if (ret) { + dev_err(afe->dev, "Unable to enable regulator\n"); + return ret; + } + + ret = regmap_write(afe->regmap, AFE440X_CONTROL0, + AFE440X_CONTROL0_SW_RESET); + if (ret) { + dev_err(afe->dev, "Unable to reset device\n"); + goto disable_reg; + } + + ret = regmap_multi_reg_write(afe->regmap, afe4404_reg_sequences, + ARRAY_SIZE(afe4404_reg_sequences)); + if (ret) { + dev_err(afe->dev, "Unable to set register defaults\n"); + goto disable_reg; + } + + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->dev.parent = afe->dev; + indio_dev->channels = afe4404_channels; + indio_dev->num_channels = ARRAY_SIZE(afe4404_channels); + indio_dev->name = AFE4404_DRIVER_NAME; + indio_dev->info = &afe4404_iio_info; + + if (afe->irq > 0) { + afe->trig = devm_iio_trigger_alloc(afe->dev, + "%s-dev%d", + indio_dev->name, + indio_dev->id); + if (!afe->trig) { + dev_err(afe->dev, "Unable to allocate IIO trigger\n"); + ret = -ENOMEM; + goto disable_reg; + } + + iio_trigger_set_drvdata(afe->trig, indio_dev); + + afe->trig->ops = &afe4404_trigger_ops; + afe->trig->dev.parent = afe->dev; + + ret = iio_trigger_register(afe->trig); + if (ret) { + dev_err(afe->dev, "Unable to register IIO trigger\n"); + goto disable_reg; + } + + ret = devm_request_threaded_irq(afe->dev, afe->irq, + iio_trigger_generic_data_rdy_poll, + NULL, IRQF_ONESHOT, + AFE4404_DRIVER_NAME, + afe->trig); + if (ret) { + dev_err(afe->dev, "Unable to request IRQ\n"); + goto disable_reg; + } + } + + ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + afe4404_trigger_handler, NULL); + if (ret) { + dev_err(afe->dev, "Unable to setup buffer\n"); + goto unregister_trigger; + } + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(afe->dev, "Unable to register IIO device\n"); + goto unregister_triggered_buffer; + } + + return 0; + +unregister_triggered_buffer: + iio_triggered_buffer_cleanup(indio_dev); +unregister_trigger: + if (afe->irq > 0) + iio_trigger_unregister(afe->trig); +disable_reg: + regulator_disable(afe->regulator); + + return ret; +} + +static int afe4404_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct afe4404_data *afe = iio_priv(indio_dev); + int ret; + + iio_device_unregister(indio_dev); + + iio_triggered_buffer_cleanup(indio_dev); + + if (afe->irq > 0) + iio_trigger_unregister(afe->trig); + + ret = regulator_disable(afe->regulator); + if (ret) { + dev_err(afe->dev, "Unable to disable regulator\n"); + return ret; + } + + return 0; +} + +static const struct i2c_device_id afe4404_ids[] = { + { "afe4404", 0 }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(i2c, afe4404_ids); + +static struct i2c_driver afe4404_i2c_driver = { + .driver = { + .name = AFE4404_DRIVER_NAME, + .of_match_table = of_match_ptr(afe4404_of_match), + .pm = &afe4404_pm_ops, + }, + .probe = afe4404_probe, + .remove = afe4404_remove, + .id_table = afe4404_ids, +}; +module_i2c_driver(afe4404_i2c_driver); + +MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>"); +MODULE_DESCRIPTION("TI AFE4404 Heart Rate and Pulse Oximeter"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/health/afe440x.h b/drivers/iio/health/afe440x.h new file mode 100644 index 000000000000..c671ab78a23a --- /dev/null +++ b/drivers/iio/health/afe440x.h @@ -0,0 +1,191 @@ +/* + * AFE440X Heart Rate Monitors and Low-Cost Pulse Oximeters + * + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Andrew F. Davis <afd@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#ifndef _AFE440X_H +#define _AFE440X_H + +/* AFE440X registers */ +#define AFE440X_CONTROL0 0x00 +#define AFE440X_LED2STC 0x01 +#define AFE440X_LED2ENDC 0x02 +#define AFE440X_LED1LEDSTC 0x03 +#define AFE440X_LED1LEDENDC 0x04 +#define AFE440X_ALED2STC 0x05 +#define AFE440X_ALED2ENDC 0x06 +#define AFE440X_LED1STC 0x07 +#define AFE440X_LED1ENDC 0x08 +#define AFE440X_LED2LEDSTC 0x09 +#define AFE440X_LED2LEDENDC 0x0a +#define AFE440X_ALED1STC 0x0b +#define AFE440X_ALED1ENDC 0x0c +#define AFE440X_LED2CONVST 0x0d +#define AFE440X_LED2CONVEND 0x0e +#define AFE440X_ALED2CONVST 0x0f +#define AFE440X_ALED2CONVEND 0x10 +#define AFE440X_LED1CONVST 0x11 +#define AFE440X_LED1CONVEND 0x12 +#define AFE440X_ALED1CONVST 0x13 +#define AFE440X_ALED1CONVEND 0x14 +#define AFE440X_ADCRSTSTCT0 0x15 +#define AFE440X_ADCRSTENDCT0 0x16 +#define AFE440X_ADCRSTSTCT1 0x17 +#define AFE440X_ADCRSTENDCT1 0x18 +#define AFE440X_ADCRSTSTCT2 0x19 +#define AFE440X_ADCRSTENDCT2 0x1a +#define AFE440X_ADCRSTSTCT3 0x1b +#define AFE440X_ADCRSTENDCT3 0x1c +#define AFE440X_PRPCOUNT 0x1d +#define AFE440X_CONTROL1 0x1e +#define AFE440X_LEDCNTRL 0x22 +#define AFE440X_CONTROL2 0x23 +#define AFE440X_ALARM 0x29 +#define AFE440X_LED2VAL 0x2a +#define AFE440X_ALED2VAL 0x2b +#define AFE440X_LED1VAL 0x2c +#define AFE440X_ALED1VAL 0x2d +#define AFE440X_LED2_ALED2VAL 0x2e +#define AFE440X_LED1_ALED1VAL 0x2f +#define AFE440X_CONTROL3 0x31 +#define AFE440X_PDNCYCLESTC 0x32 +#define AFE440X_PDNCYCLEENDC 0x33 + +/* CONTROL0 register fields */ +#define AFE440X_CONTROL0_REG_READ BIT(0) +#define AFE440X_CONTROL0_TM_COUNT_RST BIT(1) +#define AFE440X_CONTROL0_SW_RESET BIT(3) + +/* CONTROL1 register fields */ +#define AFE440X_CONTROL1_TIMEREN BIT(8) + +/* TIAGAIN register fields */ +#define AFE440X_TIAGAIN_ENSEPGAIN_MASK BIT(15) +#define AFE440X_TIAGAIN_ENSEPGAIN_SHIFT 15 + +/* CONTROL2 register fields */ +#define AFE440X_CONTROL2_PDN_AFE BIT(0) +#define AFE440X_CONTROL2_PDN_RX BIT(1) +#define AFE440X_CONTROL2_DYNAMIC4 BIT(3) +#define AFE440X_CONTROL2_DYNAMIC3 BIT(4) +#define AFE440X_CONTROL2_DYNAMIC2 BIT(14) +#define AFE440X_CONTROL2_DYNAMIC1 BIT(20) + +/* CONTROL3 register fields */ +#define AFE440X_CONTROL3_CLKDIV GENMASK(2, 0) + +/* CONTROL0 values */ +#define AFE440X_CONTROL0_WRITE 0x0 +#define AFE440X_CONTROL0_READ 0x1 + +struct afe440x_reg_info { + unsigned int reg; + unsigned int offreg; + unsigned int shift; + unsigned int mask; +}; + +#define AFE440X_REG_INFO(_reg, _offreg, _sm) \ + { \ + .reg = _reg, \ + .offreg = _offreg, \ + .shift = _sm ## _SHIFT, \ + .mask = _sm ## _MASK, \ + } + +#define AFE440X_INTENSITY_CHAN(_index, _name, _mask) \ + { \ + .type = IIO_INTENSITY, \ + .channel = _index, \ + .address = _index, \ + .scan_index = _index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 24, \ + .storagebits = 32, \ + .endianness = IIO_CPU, \ + }, \ + .extend_name = _name, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + _mask, \ + } + +#define AFE440X_CURRENT_CHAN(_index, _name) \ + { \ + .type = IIO_CURRENT, \ + .channel = _index, \ + .address = _index, \ + .scan_index = _index, \ + .extend_name = _name, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .output = true, \ + } + +enum afe440x_reg_type { + SIMPLE, + RESISTANCE, + CAPACITANCE, +}; + +struct afe440x_val_table { + int integer; + int fract; +}; + +#define AFE440X_TABLE_ATTR(_name, _table) \ +static ssize_t _name ## _show(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + ssize_t len = 0; \ + int i; \ + \ + for (i = 0; i < ARRAY_SIZE(_table); i++) \ + len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%06u ", \ + _table[i].integer, \ + _table[i].fract); \ + \ + buf[len - 1] = '\n'; \ + \ + return len; \ +} \ +static DEVICE_ATTR_RO(_name) + +struct afe440x_attr { + struct device_attribute dev_attr; + unsigned int reg; + unsigned int shift; + unsigned int mask; + enum afe440x_reg_type type; + const struct afe440x_val_table *val_table; + unsigned int table_size; +}; + +#define to_afe440x_attr(_dev_attr) \ + container_of(_dev_attr, struct afe440x_attr, dev_attr) + +#define AFE440X_ATTR(_name, _reg, _field, _type, _table, _size) \ + struct afe440x_attr afe440x_attr_##_name = { \ + .dev_attr = __ATTR(_name, (S_IRUGO | S_IWUSR), \ + afe440x_show_register, \ + afe440x_store_register), \ + .reg = _reg, \ + .shift = _field ## _SHIFT, \ + .mask = _field ## _MASK, \ + .type = _type, \ + .val_table = _table, \ + .table_size = _size, \ + } + +#endif /* _AFE440X_H */ diff --git a/drivers/iio/health/max30100.c b/drivers/iio/health/max30100.c index 9d1c81f91dd7..09db89359544 100644 --- a/drivers/iio/health/max30100.c +++ b/drivers/iio/health/max30100.c @@ -13,7 +13,7 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * TODO: allow LED current and pulse length controls via device tree properties + * TODO: enable pulse length controls via device tree properties */ #include <linux/module.h> @@ -24,6 +24,7 @@ #include <linux/irq.h> #include <linux/i2c.h> #include <linux/mutex.h> +#include <linux/of.h> #include <linux/regmap.h> #include <linux/iio/iio.h> #include <linux/iio/buffer.h> @@ -65,6 +66,7 @@ #define MAX30100_REG_SPO2_CONFIG_1600US 0x3 #define MAX30100_REG_LED_CONFIG 0x09 +#define MAX30100_REG_LED_CONFIG_LED_MASK 0x0f #define MAX30100_REG_LED_CONFIG_RED_LED_SHIFT 4 #define MAX30100_REG_LED_CONFIG_24MA 0x07 @@ -111,6 +113,12 @@ static const struct regmap_config max30100_regmap_config = { .volatile_reg = max30100_is_volatile_reg, }; +static const unsigned int max30100_led_current_mapping[] = { + 4400, 7600, 11000, 14200, 17400, + 20800, 24000, 27100, 30600, 33800, + 37000, 40200, 43600, 46800, 50000 +}; + static const unsigned long max30100_scan_masks[] = {0x3, 0}; static const struct iio_chan_spec max30100_channels[] = { @@ -243,15 +251,76 @@ static irqreturn_t max30100_interrupt_handler(int irq, void *private) return IRQ_HANDLED; } +static int max30100_get_current_idx(unsigned int val, int *reg) +{ + int idx; + + /* LED turned off */ + if (val == 0) { + *reg = 0; + return 0; + } + + for (idx = 0; idx < ARRAY_SIZE(max30100_led_current_mapping); idx++) { + if (max30100_led_current_mapping[idx] == val) { + *reg = idx + 1; + return 0; + } + } + + return -EINVAL; +} + +static int max30100_led_init(struct max30100_data *data) +{ + struct device *dev = &data->client->dev; + struct device_node *np = dev->of_node; + unsigned int val[2]; + int reg, ret; + + ret = of_property_read_u32_array(np, "maxim,led-current-microamp", + (unsigned int *) &val, 2); + if (ret) { + /* Default to 24 mA RED LED, 50 mA IR LED */ + reg = (MAX30100_REG_LED_CONFIG_24MA << + MAX30100_REG_LED_CONFIG_RED_LED_SHIFT) | + MAX30100_REG_LED_CONFIG_50MA; + dev_warn(dev, "no led-current-microamp set"); + + return regmap_write(data->regmap, MAX30100_REG_LED_CONFIG, reg); + } + + /* RED LED current */ + ret = max30100_get_current_idx(val[0], ®); + if (ret) { + dev_err(dev, "invalid RED current setting %d", val[0]); + return ret; + } + + ret = regmap_update_bits(data->regmap, MAX30100_REG_LED_CONFIG, + MAX30100_REG_LED_CONFIG_LED_MASK << + MAX30100_REG_LED_CONFIG_RED_LED_SHIFT, + reg << MAX30100_REG_LED_CONFIG_RED_LED_SHIFT); + if (ret) + return ret; + + /* IR LED current */ + ret = max30100_get_current_idx(val[1], ®); + if (ret) { + dev_err(dev, "invalid IR current setting %d", val[1]); + return ret; + } + + return regmap_update_bits(data->regmap, MAX30100_REG_LED_CONFIG, + MAX30100_REG_LED_CONFIG_LED_MASK, reg); +} + static int max30100_chip_init(struct max30100_data *data) { int ret; - /* RED IR LED = 24mA, IR LED = 50mA */ - ret = regmap_write(data->regmap, MAX30100_REG_LED_CONFIG, - (MAX30100_REG_LED_CONFIG_24MA << - MAX30100_REG_LED_CONFIG_RED_LED_SHIFT) | - MAX30100_REG_LED_CONFIG_50MA); + /* setup LED current settings */ + ret = max30100_led_init(data); if (ret) return ret; diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig index 6a23698d347c..866dda133336 100644 --- a/drivers/iio/humidity/Kconfig +++ b/drivers/iio/humidity/Kconfig @@ -43,14 +43,16 @@ config SI7005 humidity and temperature sensor. To compile this driver as a module, choose M here: the module - will be called si7005. + will be called si7005. This driver also + supports Hoperf TH02 Humidity and Temperature Sensor. config SI7020 tristate "Si7013/20/21 Relative Humidity and Temperature Sensors" depends on I2C help Say yes here to build support for the Silicon Labs Si7013/20/21 - Relative Humidity and Temperature Sensors. + Relative Humidity and Temperature Sensors. This driver also + supports Hoperf TH06 Humidity and Temperature Sensor. To compile this driver as a module, choose M here: the module will be called si7020. diff --git a/drivers/iio/humidity/dht11.c b/drivers/iio/humidity/dht11.c index 1165b1c4f9d6..20b500da94db 100644 --- a/drivers/iio/humidity/dht11.c +++ b/drivers/iio/humidity/dht11.c @@ -50,12 +50,32 @@ #define DHT11_EDGES_PER_READ (2 * DHT11_BITS_PER_READ + \ DHT11_EDGES_PREAMBLE + 1) -/* Data transmission timing (nano seconds) */ +/* + * Data transmission timing: + * Data bits are encoded as pulse length (high time) on the data line. + * 0-bit: 22-30uS -- typically 26uS (AM2302) + * 1-bit: 68-75uS -- typically 70uS (AM2302) + * The acutal timings also depend on the properties of the cable, with + * longer cables typically making pulses shorter. + * + * Our decoding depends on the time resolution of the system: + * timeres > 34uS ... don't know what a 1-tick pulse is + * 34uS > timeres > 30uS ... no problem (30kHz and 32kHz clocks) + * 30uS > timeres > 23uS ... don't know what a 2-tick pulse is + * timeres < 23uS ... no problem + * + * Luckily clocks in the 33-44kHz range are quite uncommon, so we can + * support most systems if the threshold for decoding a pulse as 1-bit + * is chosen carefully. If somebody really wants to support clocks around + * 40kHz, where this driver is most unreliable, there are two options. + * a) select an implementation using busy loop polling on those systems + * b) use the checksum to do some probabilistic decoding + */ #define DHT11_START_TRANSMISSION 18 /* ms */ -#define DHT11_SENSOR_RESPONSE 80000 -#define DHT11_START_BIT 50000 -#define DHT11_DATA_BIT_LOW 27000 -#define DHT11_DATA_BIT_HIGH 70000 +#define DHT11_MIN_TIMERES 34000 /* ns */ +#define DHT11_THRESHOLD 49000 /* ns */ +#define DHT11_AMBIG_LOW 23000 /* ns */ +#define DHT11_AMBIG_HIGH 30000 /* ns */ struct dht11 { struct device *dev; @@ -76,48 +96,44 @@ struct dht11 { struct {s64 ts; int value; } edges[DHT11_EDGES_PER_READ]; }; -static unsigned char dht11_decode_byte(int *timing, int threshold) +static unsigned char dht11_decode_byte(char *bits) { unsigned char ret = 0; int i; for (i = 0; i < 8; ++i) { ret <<= 1; - if (timing[i] >= threshold) + if (bits[i]) ++ret; } return ret; } -static int dht11_decode(struct dht11 *dht11, int offset, int timeres) +static int dht11_decode(struct dht11 *dht11, int offset) { - int i, t, timing[DHT11_BITS_PER_READ], threshold; + int i, t; + char bits[DHT11_BITS_PER_READ]; unsigned char temp_int, temp_dec, hum_int, hum_dec, checksum; - threshold = DHT11_DATA_BIT_HIGH / timeres; - if (DHT11_DATA_BIT_LOW / timeres + 1 >= threshold) - pr_err("dht11: WARNING: decoding ambiguous\n"); - - /* scale down with timeres and check validity */ for (i = 0; i < DHT11_BITS_PER_READ; ++i) { t = dht11->edges[offset + 2 * i + 2].ts - dht11->edges[offset + 2 * i + 1].ts; if (!dht11->edges[offset + 2 * i + 1].value) return -EIO; /* lost synchronisation */ - timing[i] = t / timeres; + bits[i] = t > DHT11_THRESHOLD; } - hum_int = dht11_decode_byte(timing, threshold); - hum_dec = dht11_decode_byte(&timing[8], threshold); - temp_int = dht11_decode_byte(&timing[16], threshold); - temp_dec = dht11_decode_byte(&timing[24], threshold); - checksum = dht11_decode_byte(&timing[32], threshold); + hum_int = dht11_decode_byte(bits); + hum_dec = dht11_decode_byte(&bits[8]); + temp_int = dht11_decode_byte(&bits[16]); + temp_dec = dht11_decode_byte(&bits[24]); + checksum = dht11_decode_byte(&bits[32]); if (((hum_int + hum_dec + temp_int + temp_dec) & 0xff) != checksum) return -EIO; - dht11->timestamp = ktime_get_real_ns(); + dht11->timestamp = ktime_get_boot_ns(); if (hum_int < 20) { /* DHT22 */ dht11->temperature = (((temp_int & 0x7f) << 8) + temp_dec) * ((temp_int & 0x80) ? -100 : 100); @@ -145,7 +161,7 @@ static irqreturn_t dht11_handle_irq(int irq, void *data) /* TODO: Consider making the handler safe for IRQ sharing */ if (dht11->num_edges < DHT11_EDGES_PER_READ && dht11->num_edges >= 0) { - dht11->edges[dht11->num_edges].ts = ktime_get_real_ns(); + dht11->edges[dht11->num_edges].ts = ktime_get_boot_ns(); dht11->edges[dht11->num_edges++].value = gpio_get_value(dht11->gpio); @@ -161,12 +177,12 @@ static int dht11_read_raw(struct iio_dev *iio_dev, int *val, int *val2, long m) { struct dht11 *dht11 = iio_priv(iio_dev); - int ret, timeres; + int ret, timeres, offset; mutex_lock(&dht11->lock); - if (dht11->timestamp + DHT11_DATA_VALID_TIME < ktime_get_real_ns()) { + if (dht11->timestamp + DHT11_DATA_VALID_TIME < ktime_get_boot_ns()) { timeres = ktime_get_resolution_ns(); - if (DHT11_DATA_BIT_HIGH < 2 * timeres) { + if (timeres > DHT11_MIN_TIMERES) { dev_err(dht11->dev, "timeresolution %dns too low\n", timeres); /* In theory a better clock could become available @@ -176,6 +192,10 @@ static int dht11_read_raw(struct iio_dev *iio_dev, ret = -EAGAIN; goto err; } + if (timeres > DHT11_AMBIG_LOW && timeres < DHT11_AMBIG_HIGH) + dev_warn(dht11->dev, + "timeresolution: %dns - decoding ambiguous\n", + timeres); reinit_completion(&dht11->completion); @@ -208,11 +228,14 @@ static int dht11_read_raw(struct iio_dev *iio_dev, if (ret < 0) goto err; - ret = dht11_decode(dht11, - dht11->num_edges == DHT11_EDGES_PER_READ ? - DHT11_EDGES_PREAMBLE : - DHT11_EDGES_PREAMBLE - 2, - timeres); + offset = DHT11_EDGES_PREAMBLE + + dht11->num_edges - DHT11_EDGES_PER_READ; + for (; offset >= 0; --offset) { + ret = dht11_decode(dht11, offset); + if (!ret) + break; + } + if (ret) goto err; } @@ -279,7 +302,7 @@ static int dht11_probe(struct platform_device *pdev) return -EINVAL; } - dht11->timestamp = ktime_get_real_ns() - DHT11_DATA_VALID_TIME - 1; + dht11->timestamp = ktime_get_boot_ns() - DHT11_DATA_VALID_TIME - 1; dht11->num_edges = -1; platform_set_drvdata(pdev, iio); diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c index a7f61e881a49..fa4767613173 100644 --- a/drivers/iio/humidity/hdc100x.c +++ b/drivers/iio/humidity/hdc100x.c @@ -274,7 +274,7 @@ static int hdc100x_probe(struct i2c_client *client, if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE)) - return -ENODEV; + return -EOPNOTSUPP; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!indio_dev) diff --git a/drivers/iio/humidity/htu21.c b/drivers/iio/humidity/htu21.c index d1636a74980e..11cbc38b450f 100644 --- a/drivers/iio/humidity/htu21.c +++ b/drivers/iio/humidity/htu21.c @@ -192,7 +192,7 @@ static int htu21_probe(struct i2c_client *client, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { dev_err(&client->dev, "Adapter does not support some i2c transaction\n"); - return -ENODEV; + return -EOPNOTSUPP; } indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data)); diff --git a/drivers/iio/humidity/si7005.c b/drivers/iio/humidity/si7005.c index 91972ccd8aaf..6297766e93d0 100644 --- a/drivers/iio/humidity/si7005.c +++ b/drivers/iio/humidity/si7005.c @@ -135,7 +135,7 @@ static int si7005_probe(struct i2c_client *client, int ret; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) - return -ENODEV; + return -EOPNOTSUPP; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!indio_dev) @@ -170,6 +170,7 @@ static int si7005_probe(struct i2c_client *client, static const struct i2c_device_id si7005_id[] = { { "si7005", 0 }, + { "th02", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, si7005_id); diff --git a/drivers/iio/humidity/si7020.c b/drivers/iio/humidity/si7020.c index 71991b5c0658..ffc2ccf6374e 100644 --- a/drivers/iio/humidity/si7020.c +++ b/drivers/iio/humidity/si7020.c @@ -121,7 +121,7 @@ static int si7020_probe(struct i2c_client *client, if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE | I2C_FUNC_SMBUS_READ_WORD_DATA)) - return -ENODEV; + return -EOPNOTSUPP; /* Reset device, loads default settings. */ ret = i2c_smbus_write_byte(client, SI7020CMD_RESET); @@ -149,6 +149,7 @@ static int si7020_probe(struct i2c_client *client, static const struct i2c_device_id si7020_id[] = { { "si7020", 0 }, + { "th06", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, si7020_id); diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig index 48fbc0bc7e2a..a7f557af4389 100644 --- a/drivers/iio/imu/inv_mpu6050/Kconfig +++ b/drivers/iio/imu/inv_mpu6050/Kconfig @@ -3,15 +3,31 @@ # config INV_MPU6050_IIO - tristate "Invensense MPU6050 devices" - depends on I2C && SYSFS + tristate select IIO_BUFFER select IIO_TRIGGERED_BUFFER + +config INV_MPU6050_I2C + tristate "Invensense MPU6050 devices (I2C)" + depends on I2C + select INV_MPU6050_IIO select I2C_MUX + select REGMAP_I2C help This driver supports the Invensense MPU6050 devices. This driver can also support MPU6500 in MPU6050 compatibility mode and also in MPU6500 mode with some limitations. It is a gyroscope/accelerometer combo device. This driver can be built as a module. The module will be called - inv-mpu6050. + inv-mpu6050-i2c. + +config INV_MPU6050_SPI + tristate "Invensense MPU6050 devices (SPI)" + depends on SPI_MASTER + select INV_MPU6050_IIO + select REGMAP_SPI + help + This driver supports the Invensense MPU6050 devices. + It is a gyroscope/accelerometer combo device. + This driver can be built as a module. The module will be called + inv-mpu6050-spi. diff --git a/drivers/iio/imu/inv_mpu6050/Makefile b/drivers/iio/imu/inv_mpu6050/Makefile index f566f6a7b3a9..734af5e6cef9 100644 --- a/drivers/iio/imu/inv_mpu6050/Makefile +++ b/drivers/iio/imu/inv_mpu6050/Makefile @@ -3,4 +3,10 @@ # obj-$(CONFIG_INV_MPU6050_IIO) += inv-mpu6050.o -inv-mpu6050-objs := inv_mpu_core.o inv_mpu_ring.o inv_mpu_trigger.o inv_mpu_acpi.o +inv-mpu6050-objs := inv_mpu_core.o inv_mpu_ring.o inv_mpu_trigger.o + +obj-$(CONFIG_INV_MPU6050_I2C) += inv-mpu6050-i2c.o +inv-mpu6050-i2c-objs := inv_mpu_i2c.o inv_mpu_acpi.o + +obj-$(CONFIG_INV_MPU6050_SPI) += inv-mpu6050-spi.o +inv-mpu6050-spi-objs := inv_mpu_spi.o diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c index 1c982a56acd5..2771106fd650 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c @@ -66,11 +66,11 @@ static int asus_acpi_get_sensor_info(struct acpi_device *adev, union acpi_object *elem; int j; - elem = &(cpm->package.elements[i]); + elem = &cpm->package.elements[i]; for (j = 0; j < elem->package.count; ++j) { union acpi_object *sub_elem; - sub_elem = &(elem->package.elements[j]); + sub_elem = &elem->package.elements[j]; if (sub_elem->type == ACPI_TYPE_STRING) strlcpy(info->type, sub_elem->string.pointer, sizeof(info->type)); @@ -139,22 +139,23 @@ static int inv_mpu_process_acpi_config(struct i2c_client *client, return 0; } -int inv_mpu_acpi_create_mux_client(struct inv_mpu6050_state *st) +int inv_mpu_acpi_create_mux_client(struct i2c_client *client) { + struct inv_mpu6050_state *st = iio_priv(dev_get_drvdata(&client->dev)); st->mux_client = NULL; - if (ACPI_HANDLE(&st->client->dev)) { + if (ACPI_HANDLE(&client->dev)) { struct i2c_board_info info; struct acpi_device *adev; int ret = -1; - adev = ACPI_COMPANION(&st->client->dev); + adev = ACPI_COMPANION(&client->dev); memset(&info, 0, sizeof(info)); dmi_check_system(inv_mpu_dev_list); switch (matched_product_name) { case INV_MPU_ASUS_T100TA: - ret = asus_acpi_get_sensor_info(adev, st->client, + ret = asus_acpi_get_sensor_info(adev, client, &info); break; /* Add more matched product processing here */ @@ -166,7 +167,7 @@ int inv_mpu_acpi_create_mux_client(struct inv_mpu6050_state *st) /* No matching DMI, so create device on INV6XX type */ unsigned short primary, secondary; - ret = inv_mpu_process_acpi_config(st->client, &primary, + ret = inv_mpu_process_acpi_config(client, &primary, &secondary); if (!ret && secondary) { char *name; @@ -185,14 +186,15 @@ int inv_mpu_acpi_create_mux_client(struct inv_mpu6050_state *st) st->mux_client = i2c_new_device(st->mux_adapter, &info); if (!st->mux_client) return -ENODEV; - } return 0; } -void inv_mpu_acpi_delete_mux_client(struct inv_mpu6050_state *st) +void inv_mpu_acpi_delete_mux_client(struct i2c_client *client) { + struct inv_mpu6050_state *st = iio_priv(dev_get_drvdata(&client->dev)); + if (st->mux_client) i2c_unregister_device(st->mux_client); } @@ -200,12 +202,12 @@ void inv_mpu_acpi_delete_mux_client(struct inv_mpu6050_state *st) #include "inv_mpu_iio.h" -int inv_mpu_acpi_create_mux_client(struct inv_mpu6050_state *st) +int inv_mpu_acpi_create_mux_client(struct i2c_client *client) { return 0; } -void inv_mpu_acpi_delete_mux_client(struct inv_mpu6050_state *st) +void inv_mpu_acpi_delete_mux_client(struct i2c_client *client) { } #endif diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index f0e06093b5e8..d192953e9a38 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -39,6 +39,26 @@ static const int gyro_scale_6050[] = {133090, 266181, 532362, 1064724}; */ static const int accel_scale[] = {598, 1196, 2392, 4785}; +static const struct inv_mpu6050_reg_map reg_set_6500 = { + .sample_rate_div = INV_MPU6050_REG_SAMPLE_RATE_DIV, + .lpf = INV_MPU6050_REG_CONFIG, + .user_ctrl = INV_MPU6050_REG_USER_CTRL, + .fifo_en = INV_MPU6050_REG_FIFO_EN, + .gyro_config = INV_MPU6050_REG_GYRO_CONFIG, + .accl_config = INV_MPU6050_REG_ACCEL_CONFIG, + .fifo_count_h = INV_MPU6050_REG_FIFO_COUNT_H, + .fifo_r_w = INV_MPU6050_REG_FIFO_R_W, + .raw_gyro = INV_MPU6050_REG_RAW_GYRO, + .raw_accl = INV_MPU6050_REG_RAW_ACCEL, + .temperature = INV_MPU6050_REG_TEMPERATURE, + .int_enable = INV_MPU6050_REG_INT_ENABLE, + .pwr_mgmt_1 = INV_MPU6050_REG_PWR_MGMT_1, + .pwr_mgmt_2 = INV_MPU6050_REG_PWR_MGMT_2, + .int_pin_cfg = INV_MPU6050_REG_INT_PIN_CFG, + .accl_offset = INV_MPU6500_REG_ACCEL_OFFSET, + .gyro_offset = INV_MPU6050_REG_GYRO_OFFSET, +}; + static const struct inv_mpu6050_reg_map reg_set_6050 = { .sample_rate_div = INV_MPU6050_REG_SAMPLE_RATE_DIV, .lpf = INV_MPU6050_REG_CONFIG, @@ -55,6 +75,8 @@ static const struct inv_mpu6050_reg_map reg_set_6050 = { .pwr_mgmt_1 = INV_MPU6050_REG_PWR_MGMT_1, .pwr_mgmt_2 = INV_MPU6050_REG_PWR_MGMT_2, .int_pin_cfg = INV_MPU6050_REG_INT_PIN_CFG, + .accl_offset = INV_MPU6050_REG_ACCEL_OFFSET, + .gyro_offset = INV_MPU6050_REG_GYRO_OFFSET, }; static const struct inv_mpu6050_chip_config chip_config_6050 = { @@ -66,7 +88,13 @@ static const struct inv_mpu6050_chip_config chip_config_6050 = { .accl_fs = INV_MPU6050_FS_02G, }; -static const struct inv_mpu6050_hw hw_info[INV_NUM_PARTS] = { +static const struct inv_mpu6050_hw hw_info[] = { + { + .num_reg = 117, + .name = "MPU6500", + .reg = ®_set_6500, + .config = &chip_config_6050, + }, { .num_reg = 117, .name = "MPU6050", @@ -75,134 +103,53 @@ static const struct inv_mpu6050_hw hw_info[INV_NUM_PARTS] = { }, }; -int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 d) -{ - return i2c_smbus_write_i2c_block_data(st->client, reg, 1, &d); -} - -/* - * The i2c read/write needs to happen in unlocked mode. As the parent - * adapter is common. If we use locked versions, it will fail as - * the mux adapter will lock the parent i2c adapter, while calling - * select/deselect functions. - */ -static int inv_mpu6050_write_reg_unlocked(struct inv_mpu6050_state *st, - u8 reg, u8 d) -{ - int ret; - u8 buf[2]; - struct i2c_msg msg[1] = { - { - .addr = st->client->addr, - .flags = 0, - .len = sizeof(buf), - .buf = buf, - } - }; - - buf[0] = reg; - buf[1] = d; - ret = __i2c_transfer(st->client->adapter, msg, 1); - if (ret != 1) - return ret; - - return 0; -} - -static int inv_mpu6050_select_bypass(struct i2c_adapter *adap, void *mux_priv, - u32 chan_id) -{ - struct iio_dev *indio_dev = mux_priv; - struct inv_mpu6050_state *st = iio_priv(indio_dev); - int ret = 0; - - /* Use the same mutex which was used everywhere to protect power-op */ - mutex_lock(&indio_dev->mlock); - if (!st->powerup_count) { - ret = inv_mpu6050_write_reg_unlocked(st, st->reg->pwr_mgmt_1, - 0); - if (ret) - goto write_error; - - msleep(INV_MPU6050_REG_UP_TIME); - } - if (!ret) { - st->powerup_count++; - ret = inv_mpu6050_write_reg_unlocked(st, st->reg->int_pin_cfg, - st->client->irq | - INV_MPU6050_BIT_BYPASS_EN); - } -write_error: - mutex_unlock(&indio_dev->mlock); - - return ret; -} - -static int inv_mpu6050_deselect_bypass(struct i2c_adapter *adap, - void *mux_priv, u32 chan_id) -{ - struct iio_dev *indio_dev = mux_priv; - struct inv_mpu6050_state *st = iio_priv(indio_dev); - - mutex_lock(&indio_dev->mlock); - /* It doesn't really mattter, if any of the calls fails */ - inv_mpu6050_write_reg_unlocked(st, st->reg->int_pin_cfg, - st->client->irq); - st->powerup_count--; - if (!st->powerup_count) - inv_mpu6050_write_reg_unlocked(st, st->reg->pwr_mgmt_1, - INV_MPU6050_BIT_SLEEP); - mutex_unlock(&indio_dev->mlock); - - return 0; -} - int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask) { - u8 d, mgmt_1; + unsigned int d, mgmt_1; int result; - - /* switch clock needs to be careful. Only when gyro is on, can - clock source be switched to gyro. Otherwise, it must be set to - internal clock */ - if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) { - result = i2c_smbus_read_i2c_block_data(st->client, - st->reg->pwr_mgmt_1, 1, &mgmt_1); - if (result != 1) + /* + * switch clock needs to be careful. Only when gyro is on, can + * clock source be switched to gyro. Otherwise, it must be set to + * internal clock + */ + if (mask == INV_MPU6050_BIT_PWR_GYRO_STBY) { + result = regmap_read(st->map, st->reg->pwr_mgmt_1, &mgmt_1); + if (result) return result; mgmt_1 &= ~INV_MPU6050_BIT_CLK_MASK; } - if ((INV_MPU6050_BIT_PWR_GYRO_STBY == mask) && (!en)) { - /* turning off gyro requires switch to internal clock first. - Then turn off gyro engine */ + if ((mask == INV_MPU6050_BIT_PWR_GYRO_STBY) && (!en)) { + /* + * turning off gyro requires switch to internal clock first. + * Then turn off gyro engine + */ mgmt_1 |= INV_CLK_INTERNAL; - result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1, mgmt_1); + result = regmap_write(st->map, st->reg->pwr_mgmt_1, mgmt_1); if (result) return result; } - result = i2c_smbus_read_i2c_block_data(st->client, - st->reg->pwr_mgmt_2, 1, &d); - if (result != 1) + result = regmap_read(st->map, st->reg->pwr_mgmt_2, &d); + if (result) return result; if (en) d &= ~mask; else d |= mask; - result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_2, d); + result = regmap_write(st->map, st->reg->pwr_mgmt_2, d); if (result) return result; if (en) { /* Wait for output stabilize */ msleep(INV_MPU6050_TEMP_UP_TIME); - if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) { + if (mask == INV_MPU6050_BIT_PWR_GYRO_STBY) { /* switch internal clock to PLL */ mgmt_1 |= INV_CLK_PLL; - result = inv_mpu6050_write_reg(st, - st->reg->pwr_mgmt_1, mgmt_1); + result = regmap_write(st->map, + st->reg->pwr_mgmt_1, mgmt_1); if (result) return result; } @@ -218,25 +165,26 @@ int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on) if (power_on) { /* Already under indio-dev->mlock mutex */ if (!st->powerup_count) - result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1, - 0); + result = regmap_write(st->map, st->reg->pwr_mgmt_1, 0); if (!result) st->powerup_count++; } else { st->powerup_count--; if (!st->powerup_count) - result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1, - INV_MPU6050_BIT_SLEEP); + result = regmap_write(st->map, st->reg->pwr_mgmt_1, + INV_MPU6050_BIT_SLEEP); } if (result) return result; if (power_on) - msleep(INV_MPU6050_REG_UP_TIME); + usleep_range(INV_MPU6050_REG_UP_TIME_MIN, + INV_MPU6050_REG_UP_TIME_MAX); return 0; } +EXPORT_SYMBOL_GPL(inv_mpu6050_set_power_itg); /** * inv_mpu6050_init_config() - Initialize hardware, disable FIFO. @@ -257,59 +205,73 @@ static int inv_mpu6050_init_config(struct iio_dev *indio_dev) if (result) return result; d = (INV_MPU6050_FSR_2000DPS << INV_MPU6050_GYRO_CONFIG_FSR_SHIFT); - result = inv_mpu6050_write_reg(st, st->reg->gyro_config, d); + result = regmap_write(st->map, st->reg->gyro_config, d); if (result) return result; d = INV_MPU6050_FILTER_20HZ; - result = inv_mpu6050_write_reg(st, st->reg->lpf, d); + result = regmap_write(st->map, st->reg->lpf, d); if (result) return result; d = INV_MPU6050_ONE_K_HZ / INV_MPU6050_INIT_FIFO_RATE - 1; - result = inv_mpu6050_write_reg(st, st->reg->sample_rate_div, d); + result = regmap_write(st->map, st->reg->sample_rate_div, d); if (result) return result; d = (INV_MPU6050_FS_02G << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT); - result = inv_mpu6050_write_reg(st, st->reg->accl_config, d); + result = regmap_write(st->map, st->reg->accl_config, d); if (result) return result; memcpy(&st->chip_config, hw_info[st->chip_type].config, - sizeof(struct inv_mpu6050_chip_config)); + sizeof(struct inv_mpu6050_chip_config)); result = inv_mpu6050_set_power_itg(st, false); return result; } +static int inv_mpu6050_sensor_set(struct inv_mpu6050_state *st, int reg, + int axis, int val) +{ + int ind, result; + __be16 d = cpu_to_be16(val); + + ind = (axis - IIO_MOD_X) * 2; + result = regmap_bulk_write(st->map, reg + ind, (u8 *)&d, 2); + if (result) + return -EINVAL; + + return 0; +} + static int inv_mpu6050_sensor_show(struct inv_mpu6050_state *st, int reg, - int axis, int *val) + int axis, int *val) { int ind, result; __be16 d; ind = (axis - IIO_MOD_X) * 2; - result = i2c_smbus_read_i2c_block_data(st->client, reg + ind, 2, - (u8 *)&d); - if (result != 2) + result = regmap_bulk_read(st->map, reg + ind, (u8 *)&d, 2); + if (result) return -EINVAL; *val = (short)be16_to_cpup(&d); return IIO_VAL_INT; } -static int inv_mpu6050_read_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int *val, - int *val2, - long mask) { +static int +inv_mpu6050_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ struct inv_mpu6050_state *st = iio_priv(indio_dev); + int ret = 0; switch (mask) { case IIO_CHAN_INFO_RAW: { - int ret, result; + int result; ret = IIO_VAL_INT; result = 0; @@ -323,16 +285,16 @@ static int inv_mpu6050_read_raw(struct iio_dev *indio_dev, switch (chan->type) { case IIO_ANGL_VEL: if (!st->chip_config.gyro_fifo_enable || - !st->chip_config.enable) { + !st->chip_config.enable) { result = inv_mpu6050_switch_engine(st, true, INV_MPU6050_BIT_PWR_GYRO_STBY); if (result) goto error_read_raw; } - ret = inv_mpu6050_sensor_show(st, st->reg->raw_gyro, - chan->channel2, val); + ret = inv_mpu6050_sensor_show(st, st->reg->raw_gyro, + chan->channel2, val); if (!st->chip_config.gyro_fifo_enable || - !st->chip_config.enable) { + !st->chip_config.enable) { result = inv_mpu6050_switch_engine(st, false, INV_MPU6050_BIT_PWR_GYRO_STBY); if (result) @@ -341,16 +303,16 @@ static int inv_mpu6050_read_raw(struct iio_dev *indio_dev, break; case IIO_ACCEL: if (!st->chip_config.accl_fifo_enable || - !st->chip_config.enable) { + !st->chip_config.enable) { result = inv_mpu6050_switch_engine(st, true, INV_MPU6050_BIT_PWR_ACCL_STBY); if (result) goto error_read_raw; } ret = inv_mpu6050_sensor_show(st, st->reg->raw_accl, - chan->channel2, val); + chan->channel2, val); if (!st->chip_config.accl_fifo_enable || - !st->chip_config.enable) { + !st->chip_config.enable) { result = inv_mpu6050_switch_engine(st, false, INV_MPU6050_BIT_PWR_ACCL_STBY); if (result) @@ -360,8 +322,8 @@ static int inv_mpu6050_read_raw(struct iio_dev *indio_dev, case IIO_TEMP: /* wait for stablization */ msleep(INV_MPU6050_SENSOR_UP_TIME); - inv_mpu6050_sensor_show(st, st->reg->temperature, - IIO_MOD_X, val); + ret = inv_mpu6050_sensor_show(st, st->reg->temperature, + IIO_MOD_X, val); break; default: ret = -EINVAL; @@ -405,6 +367,20 @@ error_read_raw: default: return -EINVAL; } + case IIO_CHAN_INFO_CALIBBIAS: + switch (chan->type) { + case IIO_ANGL_VEL: + ret = inv_mpu6050_sensor_show(st, st->reg->gyro_offset, + chan->channel2, val); + return IIO_VAL_INT; + case IIO_ACCEL: + ret = inv_mpu6050_sensor_show(st, st->reg->accl_offset, + chan->channel2, val); + return IIO_VAL_INT; + + default: + return -EINVAL; + } default: return -EINVAL; } @@ -418,8 +394,7 @@ static int inv_mpu6050_write_gyro_scale(struct inv_mpu6050_state *st, int val) for (i = 0; i < ARRAY_SIZE(gyro_scale_6050); ++i) { if (gyro_scale_6050[i] == val) { d = (i << INV_MPU6050_GYRO_CONFIG_FSR_SHIFT); - result = inv_mpu6050_write_reg(st, - st->reg->gyro_config, d); + result = regmap_write(st->map, st->reg->gyro_config, d); if (result) return result; @@ -448,6 +423,7 @@ static int inv_write_raw_get_fmt(struct iio_dev *indio_dev, return -EINVAL; } + static int inv_mpu6050_write_accel_scale(struct inv_mpu6050_state *st, int val) { int result, i; @@ -456,8 +432,7 @@ static int inv_mpu6050_write_accel_scale(struct inv_mpu6050_state *st, int val) for (i = 0; i < ARRAY_SIZE(accel_scale); ++i) { if (accel_scale[i] == val) { d = (i << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT); - result = inv_mpu6050_write_reg(st, - st->reg->accl_config, d); + result = regmap_write(st->map, st->reg->accl_config, d); if (result) return result; @@ -470,16 +445,17 @@ static int inv_mpu6050_write_accel_scale(struct inv_mpu6050_state *st, int val) } static int inv_mpu6050_write_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int val, - int val2, - long mask) { + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ struct inv_mpu6050_state *st = iio_priv(indio_dev); int result; mutex_lock(&indio_dev->mlock); - /* we should only update scale when the chip is disabled, i.e., - not running */ + /* + * we should only update scale when the chip is disabled, i.e. + * not running + */ if (st->chip_config.enable) { result = -EBUSY; goto error_write_raw; @@ -502,6 +478,21 @@ static int inv_mpu6050_write_raw(struct iio_dev *indio_dev, break; } break; + case IIO_CHAN_INFO_CALIBBIAS: + switch (chan->type) { + case IIO_ANGL_VEL: + result = inv_mpu6050_sensor_set(st, + st->reg->gyro_offset, + chan->channel2, val); + break; + case IIO_ACCEL: + result = inv_mpu6050_sensor_set(st, + st->reg->accl_offset, + chan->channel2, val); + break; + default: + result = -EINVAL; + } default: result = -EINVAL; break; @@ -537,7 +528,7 @@ static int inv_mpu6050_set_lpf(struct inv_mpu6050_state *st, int rate) while ((h < hz[i]) && (i < ARRAY_SIZE(d) - 1)) i++; data = d[i]; - result = inv_mpu6050_write_reg(st, st->reg->lpf, data); + result = regmap_write(st->map, st->reg->lpf, data); if (result) return result; st->chip_config.lpf = data; @@ -548,8 +539,9 @@ static int inv_mpu6050_set_lpf(struct inv_mpu6050_state *st, int rate) /** * inv_mpu6050_fifo_rate_store() - Set fifo rate. */ -static ssize_t inv_mpu6050_fifo_rate_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) +static ssize_t +inv_mpu6050_fifo_rate_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { s32 fifo_rate; u8 d; @@ -560,7 +552,7 @@ static ssize_t inv_mpu6050_fifo_rate_store(struct device *dev, if (kstrtoint(buf, 10, &fifo_rate)) return -EINVAL; if (fifo_rate < INV_MPU6050_MIN_FIFO_RATE || - fifo_rate > INV_MPU6050_MAX_FIFO_RATE) + fifo_rate > INV_MPU6050_MAX_FIFO_RATE) return -EINVAL; if (fifo_rate == st->chip_config.fifo_rate) return count; @@ -575,7 +567,7 @@ static ssize_t inv_mpu6050_fifo_rate_store(struct device *dev, goto fifo_rate_fail; d = INV_MPU6050_ONE_K_HZ / fifo_rate - 1; - result = inv_mpu6050_write_reg(st, st->reg->sample_rate_div, d); + result = regmap_write(st->map, st->reg->sample_rate_div, d); if (result) goto fifo_rate_fail; st->chip_config.fifo_rate = fifo_rate; @@ -596,8 +588,9 @@ fifo_rate_fail: /** * inv_fifo_rate_show() - Get the current sampling rate. */ -static ssize_t inv_fifo_rate_show(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t +inv_fifo_rate_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct inv_mpu6050_state *st = iio_priv(dev_to_iio_dev(dev)); @@ -608,16 +601,18 @@ static ssize_t inv_fifo_rate_show(struct device *dev, * inv_attr_show() - calling this function will show current * parameters. */ -static ssize_t inv_attr_show(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t inv_attr_show(struct device *dev, struct device_attribute *attr, + char *buf) { struct inv_mpu6050_state *st = iio_priv(dev_to_iio_dev(dev)); struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); s8 *m; switch (this_attr->address) { - /* In MPU6050, the two matrix are the same because gyro and accel - are integrated in one chip */ + /* + * In MPU6050, the two matrix are the same because gyro and accel + * are integrated in one chip + */ case ATTR_GYRO_MATRIX: case ATTR_ACCL_MATRIX: m = st->plat_data.orientation; @@ -654,14 +649,15 @@ static int inv_mpu6050_validate_trigger(struct iio_dev *indio_dev, .type = _type, \ .modified = 1, \ .channel2 = _channel2, \ - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_CALIBBIAS), \ .scan_index = _index, \ .scan_type = { \ .sign = 's', \ .realbits = 16, \ .storagebits = 16, \ - .shift = 0 , \ + .shift = 0, \ .endianness = IIO_BE, \ }, \ } @@ -674,7 +670,7 @@ static const struct iio_chan_spec inv_mpu_channels[] = { */ { .type = IIO_TEMP, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE), .scan_index = -1, @@ -727,25 +723,25 @@ static const struct iio_info mpu_info = { /** * inv_check_and_setup_chip() - check and setup chip. */ -static int inv_check_and_setup_chip(struct inv_mpu6050_state *st, - const struct i2c_device_id *id) +static int inv_check_and_setup_chip(struct inv_mpu6050_state *st) { int result; - st->chip_type = INV_MPU6050; st->hw = &hw_info[st->chip_type]; st->reg = hw_info[st->chip_type].reg; /* reset to make sure previous state are not there */ - result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1, - INV_MPU6050_BIT_H_RESET); + result = regmap_write(st->map, st->reg->pwr_mgmt_1, + INV_MPU6050_BIT_H_RESET); if (result) return result; msleep(INV_MPU6050_POWER_UP_TIME); - /* toggle power state. After reset, the sleep bit could be on - or off depending on the OTP settings. Toggling power would - make it in a definite state as well as making the hardware - state align with the software state */ + /* + * toggle power state. After reset, the sleep bit could be on + * or off depending on the OTP settings. Toggling power would + * make it in a definite state as well as making the hardware + * state align with the software state + */ result = inv_mpu6050_set_power_itg(st, false); if (result) return result; @@ -754,65 +750,59 @@ static int inv_check_and_setup_chip(struct inv_mpu6050_state *st, return result; result = inv_mpu6050_switch_engine(st, false, - INV_MPU6050_BIT_PWR_ACCL_STBY); + INV_MPU6050_BIT_PWR_ACCL_STBY); if (result) return result; result = inv_mpu6050_switch_engine(st, false, - INV_MPU6050_BIT_PWR_GYRO_STBY); + INV_MPU6050_BIT_PWR_GYRO_STBY); if (result) return result; return 0; } -/** - * inv_mpu_probe() - probe function. - * @client: i2c client. - * @id: i2c device id. - * - * Returns 0 on success, a negative error code otherwise. - */ -static int inv_mpu_probe(struct i2c_client *client, - const struct i2c_device_id *id) +int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name, + int (*inv_mpu_bus_setup)(struct iio_dev *), int chip_type) { struct inv_mpu6050_state *st; struct iio_dev *indio_dev; struct inv_mpu6050_platform_data *pdata; + struct device *dev = regmap_get_device(regmap); int result; - if (!i2c_check_functionality(client->adapter, - I2C_FUNC_SMBUS_I2C_BLOCK)) - return -ENOSYS; - - indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st)); + indio_dev = devm_iio_device_alloc(dev, sizeof(*st)); if (!indio_dev) return -ENOMEM; st = iio_priv(indio_dev); - st->client = client; + st->chip_type = chip_type; st->powerup_count = 0; - pdata = dev_get_platdata(&client->dev); + st->irq = irq; + st->map = regmap; + pdata = dev_get_platdata(dev); if (pdata) st->plat_data = *pdata; /* power is turned on inside check chip type*/ - result = inv_check_and_setup_chip(st, id); + result = inv_check_and_setup_chip(st); if (result) return result; + if (inv_mpu_bus_setup) + inv_mpu_bus_setup(indio_dev); + result = inv_mpu6050_init_config(indio_dev); if (result) { - dev_err(&client->dev, - "Could not initialize device.\n"); + dev_err(dev, "Could not initialize device.\n"); return result; } - i2c_set_clientdata(client, indio_dev); - indio_dev->dev.parent = &client->dev; - /* id will be NULL when enumerated via ACPI */ - if (id) - indio_dev->name = (char *)id->name; + dev_set_drvdata(dev, indio_dev); + indio_dev->dev.parent = dev; + /* name will be NULL when enumerated via ACPI */ + if (name) + indio_dev->name = name; else - indio_dev->name = (char *)dev_name(&client->dev); + indio_dev->name = dev_name(dev); indio_dev->channels = inv_mpu_channels; indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels); @@ -824,13 +814,12 @@ static int inv_mpu_probe(struct i2c_client *client, inv_mpu6050_read_fifo, NULL); if (result) { - dev_err(&st->client->dev, "configure buffer fail %d\n", - result); + dev_err(dev, "configure buffer fail %d\n", result); return result; } result = inv_mpu6050_probe_trigger(indio_dev); if (result) { - dev_err(&st->client->dev, "trigger probe fail %d\n", result); + dev_err(dev, "trigger probe fail %d\n", result); goto out_unreg_ring; } @@ -838,102 +827,47 @@ static int inv_mpu_probe(struct i2c_client *client, spin_lock_init(&st->time_stamp_lock); result = iio_device_register(indio_dev); if (result) { - dev_err(&st->client->dev, "IIO register fail %d\n", result); + dev_err(dev, "IIO register fail %d\n", result); goto out_remove_trigger; } - st->mux_adapter = i2c_add_mux_adapter(client->adapter, - &client->dev, - indio_dev, - 0, 0, 0, - inv_mpu6050_select_bypass, - inv_mpu6050_deselect_bypass); - if (!st->mux_adapter) { - result = -ENODEV; - goto out_unreg_device; - } - - result = inv_mpu_acpi_create_mux_client(st); - if (result) - goto out_del_mux; - return 0; -out_del_mux: - i2c_del_mux_adapter(st->mux_adapter); -out_unreg_device: - iio_device_unregister(indio_dev); out_remove_trigger: inv_mpu6050_remove_trigger(st); out_unreg_ring: iio_triggered_buffer_cleanup(indio_dev); return result; } +EXPORT_SYMBOL_GPL(inv_mpu_core_probe); -static int inv_mpu_remove(struct i2c_client *client) +int inv_mpu_core_remove(struct device *dev) { - struct iio_dev *indio_dev = i2c_get_clientdata(client); - struct inv_mpu6050_state *st = iio_priv(indio_dev); + struct iio_dev *indio_dev = dev_get_drvdata(dev); - inv_mpu_acpi_delete_mux_client(st); - i2c_del_mux_adapter(st->mux_adapter); iio_device_unregister(indio_dev); - inv_mpu6050_remove_trigger(st); + inv_mpu6050_remove_trigger(iio_priv(indio_dev)); iio_triggered_buffer_cleanup(indio_dev); return 0; } +EXPORT_SYMBOL_GPL(inv_mpu_core_remove); + #ifdef CONFIG_PM_SLEEP static int inv_mpu_resume(struct device *dev) { - return inv_mpu6050_set_power_itg( - iio_priv(i2c_get_clientdata(to_i2c_client(dev))), true); + return inv_mpu6050_set_power_itg(iio_priv(dev_get_drvdata(dev)), true); } static int inv_mpu_suspend(struct device *dev) { - return inv_mpu6050_set_power_itg( - iio_priv(i2c_get_clientdata(to_i2c_client(dev))), false); + return inv_mpu6050_set_power_itg(iio_priv(dev_get_drvdata(dev)), false); } -static SIMPLE_DEV_PM_OPS(inv_mpu_pmops, inv_mpu_suspend, inv_mpu_resume); - -#define INV_MPU6050_PMOPS (&inv_mpu_pmops) -#else -#define INV_MPU6050_PMOPS NULL #endif /* CONFIG_PM_SLEEP */ -/* - * device id table is used to identify what device can be - * supported by this driver - */ -static const struct i2c_device_id inv_mpu_id[] = { - {"mpu6050", INV_MPU6050}, - {"mpu6500", INV_MPU6500}, - {} -}; - -MODULE_DEVICE_TABLE(i2c, inv_mpu_id); - -static const struct acpi_device_id inv_acpi_match[] = { - {"INVN6500", 0}, - { }, -}; - -MODULE_DEVICE_TABLE(acpi, inv_acpi_match); - -static struct i2c_driver inv_mpu_driver = { - .probe = inv_mpu_probe, - .remove = inv_mpu_remove, - .id_table = inv_mpu_id, - .driver = { - .name = "inv-mpu6050", - .pm = INV_MPU6050_PMOPS, - .acpi_match_table = ACPI_PTR(inv_acpi_match), - }, -}; - -module_i2c_driver(inv_mpu_driver); +SIMPLE_DEV_PM_OPS(inv_mpu_pmops, inv_mpu_suspend, inv_mpu_resume); +EXPORT_SYMBOL_GPL(inv_mpu_pmops); MODULE_AUTHOR("Invensense Corporation"); MODULE_DESCRIPTION("Invensense device MPU6050 driver"); diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c new file mode 100644 index 000000000000..f581256d9d4c --- /dev/null +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c @@ -0,0 +1,208 @@ +/* +* Copyright (C) 2012 Invensense, Inc. +* +* This software is licensed under the terms of the GNU General Public +* License version 2, as published by the Free Software Foundation, and +* may be copied, distributed, and modified under those terms. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ + +#include <linux/acpi.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/i2c-mux.h> +#include <linux/iio/iio.h> +#include <linux/module.h> +#include "inv_mpu_iio.h" + +static const struct regmap_config inv_mpu_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +/* + * The i2c read/write needs to happen in unlocked mode. As the parent + * adapter is common. If we use locked versions, it will fail as + * the mux adapter will lock the parent i2c adapter, while calling + * select/deselect functions. + */ +static int inv_mpu6050_write_reg_unlocked(struct i2c_client *client, + u8 reg, u8 d) +{ + int ret; + u8 buf[2] = {reg, d}; + struct i2c_msg msg[1] = { + { + .addr = client->addr, + .flags = 0, + .len = sizeof(buf), + .buf = buf, + } + }; + + ret = __i2c_transfer(client->adapter, msg, 1); + if (ret != 1) + return ret; + + return 0; +} + +static int inv_mpu6050_select_bypass(struct i2c_adapter *adap, void *mux_priv, + u32 chan_id) +{ + struct i2c_client *client = mux_priv; + struct iio_dev *indio_dev = dev_get_drvdata(&client->dev); + struct inv_mpu6050_state *st = iio_priv(indio_dev); + int ret = 0; + + /* Use the same mutex which was used everywhere to protect power-op */ + mutex_lock(&indio_dev->mlock); + if (!st->powerup_count) { + ret = inv_mpu6050_write_reg_unlocked(client, + st->reg->pwr_mgmt_1, 0); + if (ret) + goto write_error; + + usleep_range(INV_MPU6050_REG_UP_TIME_MIN, + INV_MPU6050_REG_UP_TIME_MAX); + } + if (!ret) { + st->powerup_count++; + ret = inv_mpu6050_write_reg_unlocked(client, + st->reg->int_pin_cfg, + INV_MPU6050_INT_PIN_CFG | + INV_MPU6050_BIT_BYPASS_EN); + } +write_error: + mutex_unlock(&indio_dev->mlock); + + return ret; +} + +static int inv_mpu6050_deselect_bypass(struct i2c_adapter *adap, + void *mux_priv, u32 chan_id) +{ + struct i2c_client *client = mux_priv; + struct iio_dev *indio_dev = dev_get_drvdata(&client->dev); + struct inv_mpu6050_state *st = iio_priv(indio_dev); + + mutex_lock(&indio_dev->mlock); + /* It doesn't really mattter, if any of the calls fails */ + inv_mpu6050_write_reg_unlocked(client, st->reg->int_pin_cfg, + INV_MPU6050_INT_PIN_CFG); + st->powerup_count--; + if (!st->powerup_count) + inv_mpu6050_write_reg_unlocked(client, st->reg->pwr_mgmt_1, + INV_MPU6050_BIT_SLEEP); + mutex_unlock(&indio_dev->mlock); + + return 0; +} + +/** + * inv_mpu_probe() - probe function. + * @client: i2c client. + * @id: i2c device id. + * + * Returns 0 on success, a negative error code otherwise. + */ +static int inv_mpu_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct inv_mpu6050_state *st; + int result; + const char *name = id ? id->name : NULL; + struct regmap *regmap; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_I2C_BLOCK)) + return -EOPNOTSUPP; + + regmap = devm_regmap_init_i2c(client, &inv_mpu_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "Failed to register i2c regmap %d\n", + (int)PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + result = inv_mpu_core_probe(regmap, client->irq, name, + NULL, id->driver_data); + if (result < 0) + return result; + + st = iio_priv(dev_get_drvdata(&client->dev)); + st->mux_adapter = i2c_add_mux_adapter(client->adapter, + &client->dev, + client, + 0, 0, 0, + inv_mpu6050_select_bypass, + inv_mpu6050_deselect_bypass); + if (!st->mux_adapter) { + result = -ENODEV; + goto out_unreg_device; + } + + result = inv_mpu_acpi_create_mux_client(client); + if (result) + goto out_del_mux; + + return 0; + +out_del_mux: + i2c_del_mux_adapter(st->mux_adapter); +out_unreg_device: + inv_mpu_core_remove(&client->dev); + return result; +} + +static int inv_mpu_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct inv_mpu6050_state *st = iio_priv(indio_dev); + + inv_mpu_acpi_delete_mux_client(client); + i2c_del_mux_adapter(st->mux_adapter); + + return inv_mpu_core_remove(&client->dev); +} + +/* + * device id table is used to identify what device can be + * supported by this driver + */ +static const struct i2c_device_id inv_mpu_id[] = { + {"mpu6050", INV_MPU6050}, + {"mpu6500", INV_MPU6500}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, inv_mpu_id); + +static const struct acpi_device_id inv_acpi_match[] = { + {"INVN6500", 0}, + { }, +}; + +MODULE_DEVICE_TABLE(acpi, inv_acpi_match); + +static struct i2c_driver inv_mpu_driver = { + .probe = inv_mpu_probe, + .remove = inv_mpu_remove, + .id_table = inv_mpu_id, + .driver = { + .acpi_match_table = ACPI_PTR(inv_acpi_match), + .name = "inv-mpu6050-i2c", + .pm = &inv_mpu_pmops, + }, +}; + +module_i2c_driver(inv_mpu_driver); + +MODULE_AUTHOR("Invensense Corporation"); +MODULE_DESCRIPTION("Invensense device MPU6050 driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h index db0a4a2758ab..e302a49703bf 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h @@ -15,6 +15,7 @@ #include <linux/spinlock.h> #include <linux/iio/iio.h> #include <linux/iio/buffer.h> +#include <linux/regmap.h> #include <linux/iio/sysfs.h> #include <linux/iio/kfifo_buf.h> #include <linux/iio/trigger.h> @@ -38,6 +39,9 @@ * @int_enable: Interrupt enable register. * @pwr_mgmt_1: Controls chip's power state and clock source. * @pwr_mgmt_2: Controls power state of individual sensors. + * @int_pin_cfg; Controls interrupt pin configuration. + * @accl_offset: Controls the accelerometer calibration offset. + * @gyro_offset: Controls the gyroscope calibration offset. */ struct inv_mpu6050_reg_map { u8 sample_rate_div; @@ -55,12 +59,15 @@ struct inv_mpu6050_reg_map { u8 pwr_mgmt_1; u8 pwr_mgmt_2; u8 int_pin_cfg; + u8 accl_offset; + u8 gyro_offset; }; /*device enum */ enum inv_devices { INV_MPU6050, INV_MPU6500, + INV_MPU6000, INV_NUM_PARTS }; @@ -107,9 +114,10 @@ struct inv_mpu6050_hw { * @hw: Other hardware-specific information. * @chip_type: chip type. * @time_stamp_lock: spin lock to time stamp. - * @client: i2c client handle. * @plat_data: platform data. * @timestamps: kfifo queue to store time stamp. + * @map regmap pointer. + * @irq interrupt number. */ struct inv_mpu6050_state { #define TIMESTAMP_FIFO_SIZE 16 @@ -119,15 +127,19 @@ struct inv_mpu6050_state { const struct inv_mpu6050_hw *hw; enum inv_devices chip_type; spinlock_t time_stamp_lock; - struct i2c_client *client; struct i2c_adapter *mux_adapter; struct i2c_client *mux_client; unsigned int powerup_count; struct inv_mpu6050_platform_data plat_data; DECLARE_KFIFO(timestamps, long long, TIMESTAMP_FIFO_SIZE); + struct regmap *map; + int irq; }; /*register and associated bit definition*/ +#define INV_MPU6050_REG_ACCEL_OFFSET 0x06 +#define INV_MPU6050_REG_GYRO_OFFSET 0x13 + #define INV_MPU6050_REG_SAMPLE_RATE_DIV 0x19 #define INV_MPU6050_REG_CONFIG 0x1A #define INV_MPU6050_REG_GYRO_CONFIG 0x1B @@ -151,6 +163,7 @@ struct inv_mpu6050_state { #define INV_MPU6050_BIT_I2C_MST_EN 0x20 #define INV_MPU6050_BIT_FIFO_EN 0x40 #define INV_MPU6050_BIT_DMP_EN 0x80 +#define INV_MPU6050_BIT_I2C_IF_DIS 0x10 #define INV_MPU6050_REG_PWR_MGMT_1 0x6B #define INV_MPU6050_BIT_H_RESET 0x80 @@ -167,10 +180,18 @@ struct inv_mpu6050_state { #define INV_MPU6050_BYTES_PER_3AXIS_SENSOR 6 #define INV_MPU6050_FIFO_COUNT_BYTE 2 #define INV_MPU6050_FIFO_THRESHOLD 500 + +/* mpu6500 registers */ +#define INV_MPU6500_REG_ACCEL_OFFSET 0x77 + +/* delay time in milliseconds */ #define INV_MPU6050_POWER_UP_TIME 100 #define INV_MPU6050_TEMP_UP_TIME 100 #define INV_MPU6050_SENSOR_UP_TIME 30 -#define INV_MPU6050_REG_UP_TIME 5 + +/* delay time in microseconds */ +#define INV_MPU6050_REG_UP_TIME_MIN 5000 +#define INV_MPU6050_REG_UP_TIME_MAX 10000 #define INV_MPU6050_TEMP_OFFSET 12421 #define INV_MPU6050_TEMP_SCALE 2941 @@ -185,6 +206,7 @@ struct inv_mpu6050_state { #define INV_MPU6050_REG_INT_PIN_CFG 0x37 #define INV_MPU6050_BIT_BYPASS_EN 0x2 +#define INV_MPU6050_INT_PIN_CFG 0 /* init parameters */ #define INV_MPU6050_INIT_FIFO_RATE 50 @@ -252,5 +274,10 @@ int inv_reset_fifo(struct iio_dev *indio_dev); int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask); int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 val); int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on); -int inv_mpu_acpi_create_mux_client(struct inv_mpu6050_state *st); -void inv_mpu_acpi_delete_mux_client(struct inv_mpu6050_state *st); +int inv_mpu_acpi_create_mux_client(struct i2c_client *client); +void inv_mpu_acpi_delete_mux_client(struct i2c_client *client); +int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name, + int (*inv_mpu_bus_setup)(struct iio_dev *), int chip_type); +int inv_mpu_core_remove(struct device *dev); +int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on); +extern const struct dev_pm_ops inv_mpu_pmops; diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c index ba27e277511f..d0700628ee6d 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c @@ -13,7 +13,6 @@ #include <linux/module.h> #include <linux/slab.h> -#include <linux/i2c.h> #include <linux/err.h> #include <linux/delay.h> #include <linux/sysfs.h> @@ -41,23 +40,24 @@ int inv_reset_fifo(struct iio_dev *indio_dev) struct inv_mpu6050_state *st = iio_priv(indio_dev); /* disable interrupt */ - result = inv_mpu6050_write_reg(st, st->reg->int_enable, 0); + result = regmap_write(st->map, st->reg->int_enable, 0); if (result) { - dev_err(&st->client->dev, "int_enable failed %d\n", result); + dev_err(regmap_get_device(st->map), "int_enable failed %d\n", + result); return result; } /* disable the sensor output to FIFO */ - result = inv_mpu6050_write_reg(st, st->reg->fifo_en, 0); + result = regmap_write(st->map, st->reg->fifo_en, 0); if (result) goto reset_fifo_fail; /* disable fifo reading */ - result = inv_mpu6050_write_reg(st, st->reg->user_ctrl, 0); + result = regmap_write(st->map, st->reg->user_ctrl, 0); if (result) goto reset_fifo_fail; /* reset FIFO*/ - result = inv_mpu6050_write_reg(st, st->reg->user_ctrl, - INV_MPU6050_BIT_FIFO_RST); + result = regmap_write(st->map, st->reg->user_ctrl, + INV_MPU6050_BIT_FIFO_RST); if (result) goto reset_fifo_fail; @@ -67,14 +67,14 @@ int inv_reset_fifo(struct iio_dev *indio_dev) /* enable interrupt */ if (st->chip_config.accl_fifo_enable || st->chip_config.gyro_fifo_enable) { - result = inv_mpu6050_write_reg(st, st->reg->int_enable, - INV_MPU6050_BIT_DATA_RDY_EN); + result = regmap_write(st->map, st->reg->int_enable, + INV_MPU6050_BIT_DATA_RDY_EN); if (result) return result; } /* enable FIFO reading and I2C master interface*/ - result = inv_mpu6050_write_reg(st, st->reg->user_ctrl, - INV_MPU6050_BIT_FIFO_EN); + result = regmap_write(st->map, st->reg->user_ctrl, + INV_MPU6050_BIT_FIFO_EN); if (result) goto reset_fifo_fail; /* enable sensor output to FIFO */ @@ -83,16 +83,16 @@ int inv_reset_fifo(struct iio_dev *indio_dev) d |= INV_MPU6050_BITS_GYRO_OUT; if (st->chip_config.accl_fifo_enable) d |= INV_MPU6050_BIT_ACCEL_OUT; - result = inv_mpu6050_write_reg(st, st->reg->fifo_en, d); + result = regmap_write(st->map, st->reg->fifo_en, d); if (result) goto reset_fifo_fail; return 0; reset_fifo_fail: - dev_err(&st->client->dev, "reset fifo failed %d\n", result); - result = inv_mpu6050_write_reg(st, st->reg->int_enable, - INV_MPU6050_BIT_DATA_RDY_EN); + dev_err(regmap_get_device(st->map), "reset fifo failed %d\n", result); + result = regmap_write(st->map, st->reg->int_enable, + INV_MPU6050_BIT_DATA_RDY_EN); return result; } @@ -109,7 +109,7 @@ irqreturn_t inv_mpu6050_irq_handler(int irq, void *p) timestamp = iio_get_time_ns(); kfifo_in_spinlocked(&st->timestamps, ×tamp, 1, - &st->time_stamp_lock); + &st->time_stamp_lock); return IRQ_WAKE_THREAD; } @@ -143,10 +143,9 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) * read fifo_count register to know how many bytes inside FIFO * right now */ - result = i2c_smbus_read_i2c_block_data(st->client, - st->reg->fifo_count_h, - INV_MPU6050_FIFO_COUNT_BYTE, data); - if (result != INV_MPU6050_FIFO_COUNT_BYTE) + result = regmap_bulk_read(st->map, st->reg->fifo_count_h, data, + INV_MPU6050_FIFO_COUNT_BYTE); + if (result) goto end_session; fifo_count = be16_to_cpup((__be16 *)(&data[0])); if (fifo_count < bytes_per_datum) @@ -158,22 +157,21 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) goto flush_fifo; /* Timestamp mismatch. */ if (kfifo_len(&st->timestamps) > - fifo_count / bytes_per_datum + INV_MPU6050_TIME_STAMP_TOR) - goto flush_fifo; + fifo_count / bytes_per_datum + INV_MPU6050_TIME_STAMP_TOR) + goto flush_fifo; while (fifo_count >= bytes_per_datum) { - result = i2c_smbus_read_i2c_block_data(st->client, - st->reg->fifo_r_w, - bytes_per_datum, data); - if (result != bytes_per_datum) + result = regmap_bulk_read(st->map, st->reg->fifo_r_w, + data, bytes_per_datum); + if (result) goto flush_fifo; result = kfifo_out(&st->timestamps, ×tamp, 1); /* when there is no timestamp, put timestamp as 0 */ - if (0 == result) + if (result == 0) timestamp = 0; result = iio_push_to_buffers_with_timestamp(indio_dev, data, - timestamp); + timestamp); if (result) goto flush_fifo; fifo_count -= bytes_per_datum; diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c new file mode 100644 index 000000000000..dea6c4361de0 --- /dev/null +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c @@ -0,0 +1,98 @@ +/* +* Copyright (C) 2015 Intel Corporation Inc. +* +* This software is licensed under the terms of the GNU General Public +* License version 2, as published by the Free Software Foundation, and +* may be copied, distributed, and modified under those terms. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ +#include <linux/module.h> +#include <linux/acpi.h> +#include <linux/spi/spi.h> +#include <linux/regmap.h> +#include <linux/iio/iio.h> +#include "inv_mpu_iio.h" + +static const struct regmap_config inv_mpu_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int inv_mpu_i2c_disable(struct iio_dev *indio_dev) +{ + struct inv_mpu6050_state *st = iio_priv(indio_dev); + int ret = 0; + + ret = inv_mpu6050_set_power_itg(st, true); + if (ret) + return ret; + + ret = regmap_write(st->map, INV_MPU6050_REG_USER_CTRL, + INV_MPU6050_BIT_I2C_IF_DIS); + if (ret) { + inv_mpu6050_set_power_itg(st, false); + return ret; + } + + return inv_mpu6050_set_power_itg(st, false); +} + +static int inv_mpu_probe(struct spi_device *spi) +{ + struct regmap *regmap; + const struct spi_device_id *id = spi_get_device_id(spi); + const char *name = id ? id->name : NULL; + + regmap = devm_regmap_init_spi(spi, &inv_mpu_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&spi->dev, "Failed to register spi regmap %d\n", + (int)PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + return inv_mpu_core_probe(regmap, spi->irq, name, + inv_mpu_i2c_disable, id->driver_data); +} + +static int inv_mpu_remove(struct spi_device *spi) +{ + return inv_mpu_core_remove(&spi->dev); +} + +/* + * device id table is used to identify what device can be + * supported by this driver + */ +static const struct spi_device_id inv_mpu_id[] = { + {"mpu6000", INV_MPU6000}, + {} +}; + +MODULE_DEVICE_TABLE(spi, inv_mpu_id); + +static const struct acpi_device_id inv_acpi_match[] = { + {"INVN6000", 0}, + { }, +}; +MODULE_DEVICE_TABLE(acpi, inv_acpi_match); + +static struct spi_driver inv_mpu_driver = { + .probe = inv_mpu_probe, + .remove = inv_mpu_remove, + .id_table = inv_mpu_id, + .driver = { + .acpi_match_table = ACPI_PTR(inv_acpi_match), + .name = "inv-mpu6000-spi", + .pm = &inv_mpu_pmops, + }, +}; + +module_spi_driver(inv_mpu_driver); + +MODULE_AUTHOR("Adriana Reus <adriana.reus@intel.com>"); +MODULE_DESCRIPTION("Invensense device MPU6000 driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c index 844610c3a3a9..e8818d4dd4b8 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c @@ -19,19 +19,19 @@ static void inv_scan_query(struct iio_dev *indio_dev) st->chip_config.gyro_fifo_enable = test_bit(INV_MPU6050_SCAN_GYRO_X, - indio_dev->active_scan_mask) || - test_bit(INV_MPU6050_SCAN_GYRO_Y, - indio_dev->active_scan_mask) || - test_bit(INV_MPU6050_SCAN_GYRO_Z, - indio_dev->active_scan_mask); + indio_dev->active_scan_mask) || + test_bit(INV_MPU6050_SCAN_GYRO_Y, + indio_dev->active_scan_mask) || + test_bit(INV_MPU6050_SCAN_GYRO_Z, + indio_dev->active_scan_mask); st->chip_config.accl_fifo_enable = test_bit(INV_MPU6050_SCAN_ACCL_X, - indio_dev->active_scan_mask) || - test_bit(INV_MPU6050_SCAN_ACCL_Y, - indio_dev->active_scan_mask) || - test_bit(INV_MPU6050_SCAN_ACCL_Z, - indio_dev->active_scan_mask); + indio_dev->active_scan_mask) || + test_bit(INV_MPU6050_SCAN_ACCL_Y, + indio_dev->active_scan_mask) || + test_bit(INV_MPU6050_SCAN_ACCL_Z, + indio_dev->active_scan_mask); } /** @@ -65,15 +65,15 @@ static int inv_mpu6050_set_enable(struct iio_dev *indio_dev, bool enable) if (result) return result; } else { - result = inv_mpu6050_write_reg(st, st->reg->fifo_en, 0); + result = regmap_write(st->map, st->reg->fifo_en, 0); if (result) return result; - result = inv_mpu6050_write_reg(st, st->reg->int_enable, 0); + result = regmap_write(st->map, st->reg->int_enable, 0); if (result) return result; - result = inv_mpu6050_write_reg(st, st->reg->user_ctrl, 0); + result = regmap_write(st->map, st->reg->user_ctrl, 0); if (result) return result; @@ -101,7 +101,7 @@ static int inv_mpu6050_set_enable(struct iio_dev *indio_dev, bool enable) * @state: Desired trigger state */ static int inv_mpu_data_rdy_trigger_set_state(struct iio_trigger *trig, - bool state) + bool state) { return inv_mpu6050_set_enable(iio_trigger_get_drvdata(trig), state); } @@ -123,7 +123,7 @@ int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev) if (!st->trig) return -ENOMEM; - ret = devm_request_irq(&indio_dev->dev, st->client->irq, + ret = devm_request_irq(&indio_dev->dev, st->irq, &iio_trigger_generic_data_rdy_poll, IRQF_TRIGGER_RISING, "inv_mpu", @@ -131,7 +131,7 @@ int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev) if (ret) return ret; - st->trig->dev.parent = &st->client->dev; + st->trig->dev.parent = regmap_get_device(st->map); st->trig->ops = &inv_mpu_trigger_ops; iio_trigger_set_drvdata(st->trig, indio_dev); diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c index 139ae916225f..b976332d45d3 100644 --- a/drivers/iio/industrialio-buffer.c +++ b/drivers/iio/industrialio-buffer.c @@ -512,33 +512,41 @@ static ssize_t iio_buffer_show_enable(struct device *dev, return sprintf(buf, "%d\n", iio_buffer_is_active(indio_dev->buffer)); } +static unsigned int iio_storage_bytes_for_si(struct iio_dev *indio_dev, + unsigned int scan_index) +{ + const struct iio_chan_spec *ch; + unsigned int bytes; + + ch = iio_find_channel_from_si(indio_dev, scan_index); + bytes = ch->scan_type.storagebits / 8; + if (ch->scan_type.repeat > 1) + bytes *= ch->scan_type.repeat; + return bytes; +} + +static unsigned int iio_storage_bytes_for_timestamp(struct iio_dev *indio_dev) +{ + return iio_storage_bytes_for_si(indio_dev, + indio_dev->scan_index_timestamp); +} + static int iio_compute_scan_bytes(struct iio_dev *indio_dev, const unsigned long *mask, bool timestamp) { - const struct iio_chan_spec *ch; unsigned bytes = 0; int length, i; /* How much space will the demuxed element take? */ for_each_set_bit(i, mask, indio_dev->masklength) { - ch = iio_find_channel_from_si(indio_dev, i); - if (ch->scan_type.repeat > 1) - length = ch->scan_type.storagebits / 8 * - ch->scan_type.repeat; - else - length = ch->scan_type.storagebits / 8; + length = iio_storage_bytes_for_si(indio_dev, i); bytes = ALIGN(bytes, length); bytes += length; } + if (timestamp) { - ch = iio_find_channel_from_si(indio_dev, - indio_dev->scan_index_timestamp); - if (ch->scan_type.repeat > 1) - length = ch->scan_type.storagebits / 8 * - ch->scan_type.repeat; - else - length = ch->scan_type.storagebits / 8; + length = iio_storage_bytes_for_timestamp(indio_dev); bytes = ALIGN(bytes, length); bytes += length; } @@ -1288,7 +1296,6 @@ static int iio_buffer_add_demux(struct iio_buffer *buffer, static int iio_buffer_update_demux(struct iio_dev *indio_dev, struct iio_buffer *buffer) { - const struct iio_chan_spec *ch; int ret, in_ind = -1, out_ind, length; unsigned in_loc = 0, out_loc = 0; struct iio_demux_table *p = NULL; @@ -1315,21 +1322,11 @@ static int iio_buffer_update_demux(struct iio_dev *indio_dev, in_ind = find_next_bit(indio_dev->active_scan_mask, indio_dev->masklength, in_ind + 1); - ch = iio_find_channel_from_si(indio_dev, in_ind); - if (ch->scan_type.repeat > 1) - length = ch->scan_type.storagebits / 8 * - ch->scan_type.repeat; - else - length = ch->scan_type.storagebits / 8; + length = iio_storage_bytes_for_si(indio_dev, in_ind); /* Make sure we are aligned */ in_loc = roundup(in_loc, length) + length; } - ch = iio_find_channel_from_si(indio_dev, in_ind); - if (ch->scan_type.repeat > 1) - length = ch->scan_type.storagebits / 8 * - ch->scan_type.repeat; - else - length = ch->scan_type.storagebits / 8; + length = iio_storage_bytes_for_si(indio_dev, in_ind); out_loc = roundup(out_loc, length); in_loc = roundup(in_loc, length); ret = iio_buffer_add_demux(buffer, &p, in_loc, out_loc, length); @@ -1340,13 +1337,7 @@ static int iio_buffer_update_demux(struct iio_dev *indio_dev, } /* Relies on scan_timestamp being last */ if (buffer->scan_timestamp) { - ch = iio_find_channel_from_si(indio_dev, - indio_dev->scan_index_timestamp); - if (ch->scan_type.repeat > 1) - length = ch->scan_type.storagebits / 8 * - ch->scan_type.repeat; - else - length = ch->scan_type.storagebits / 8; + length = iio_storage_bytes_for_timestamp(indio_dev); out_loc = roundup(out_loc, length); in_loc = roundup(in_loc, length); ret = iio_buffer_add_demux(buffer, &p, in_loc, out_loc, length); diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index af7cc1e65656..70cb7eb0a75c 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -77,6 +77,7 @@ static const char * const iio_chan_type_name_spec[] = { [IIO_VELOCITY] = "velocity", [IIO_CONCENTRATION] = "concentration", [IIO_RESISTANCE] = "resistance", + [IIO_PH] = "ph", }; static const char * const iio_modifier_names[] = { diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c index 80fbbfd76faf..734a0042de0c 100644 --- a/drivers/iio/inkern.c +++ b/drivers/iio/inkern.c @@ -349,6 +349,8 @@ EXPORT_SYMBOL_GPL(iio_channel_get); void iio_channel_release(struct iio_channel *channel) { + if (!channel) + return; iio_device_put(channel->indio_dev); kfree(channel); } diff --git a/drivers/iio/light/acpi-als.c b/drivers/iio/light/acpi-als.c index 60537ec0c923..53201d99a16c 100644 --- a/drivers/iio/light/acpi-als.c +++ b/drivers/iio/light/acpi-als.c @@ -54,7 +54,9 @@ static const struct iio_chan_spec acpi_als_channels[] = { .realbits = 32, .storagebits = 32, }, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + /* _RAW is here for backward ABI compatibility */ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_PROCESSED), }, }; @@ -152,7 +154,7 @@ static int acpi_als_read_raw(struct iio_dev *indio_dev, s32 temp_val; int ret; - if (mask != IIO_CHAN_INFO_RAW) + if ((mask != IIO_CHAN_INFO_PROCESSED) && (mask != IIO_CHAN_INFO_RAW)) return -EINVAL; /* we support only illumination (_ALI) so far. */ diff --git a/drivers/iio/light/bh1750.c b/drivers/iio/light/bh1750.c index 8b4164343f20..b05946604f80 100644 --- a/drivers/iio/light/bh1750.c +++ b/drivers/iio/light/bh1750.c @@ -241,7 +241,7 @@ static int bh1750_probe(struct i2c_client *client, if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE)) - return -ENODEV; + return -EOPNOTSUPP; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!indio_dev) diff --git a/drivers/iio/light/jsa1212.c b/drivers/iio/light/jsa1212.c index c4e8c6b6c3c3..99a62816c3b4 100644 --- a/drivers/iio/light/jsa1212.c +++ b/drivers/iio/light/jsa1212.c @@ -326,7 +326,7 @@ static int jsa1212_probe(struct i2c_client *client, int ret; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return -ENODEV; + return -EOPNOTSUPP; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!indio_dev) diff --git a/drivers/iio/light/ltr501.c b/drivers/iio/light/ltr501.c index 809a961b9a7f..6bf89d8f3741 100644 --- a/drivers/iio/light/ltr501.c +++ b/drivers/iio/light/ltr501.c @@ -180,7 +180,7 @@ static const struct ltr501_samp_table ltr501_ps_samp_table[] = { {500000, 2000000} }; -static unsigned int ltr501_match_samp_freq(const struct ltr501_samp_table *tab, +static int ltr501_match_samp_freq(const struct ltr501_samp_table *tab, int len, int val, int val2) { int i, freq; diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c index 01e111e72d4b..b776c8ed4387 100644 --- a/drivers/iio/light/opt3001.c +++ b/drivers/iio/light/opt3001.c @@ -65,19 +65,25 @@ #define OPT3001_REG_EXPONENT(n) ((n) >> 12) #define OPT3001_REG_MANTISSA(n) ((n) & 0xfff) +#define OPT3001_INT_TIME_LONG 800000 +#define OPT3001_INT_TIME_SHORT 100000 + /* * Time to wait for conversion result to be ready. The device datasheet - * worst-case max value is 880ms. Add some slack to be on the safe side. + * sect. 6.5 states results are ready after total integration time plus 3ms. + * This results in worst-case max values of 113ms or 883ms, respectively. + * Add some slack to be on the safe side. */ -#define OPT3001_RESULT_READY_TIMEOUT msecs_to_jiffies(1000) +#define OPT3001_RESULT_READY_SHORT 150 +#define OPT3001_RESULT_READY_LONG 1000 struct opt3001 { struct i2c_client *client; struct device *dev; struct mutex lock; - u16 ok_to_ignore_lock:1; - u16 result_ready:1; + bool ok_to_ignore_lock; + bool result_ready; wait_queue_head_t result_ready_queue; u16 result; @@ -89,6 +95,8 @@ struct opt3001 { u8 high_thresh_exp; u8 low_thresh_exp; + + bool use_irq; }; struct opt3001_scale { @@ -227,26 +235,30 @@ static int opt3001_get_lux(struct opt3001 *opt, int *val, int *val2) u16 reg; u8 exponent; u16 value; + long timeout; - /* - * Enable the end-of-conversion interrupt mechanism. Note that doing - * so will overwrite the low-level limit value however we will restore - * this value later on. - */ - ret = i2c_smbus_write_word_swapped(opt->client, OPT3001_LOW_LIMIT, - OPT3001_LOW_LIMIT_EOC_ENABLE); - if (ret < 0) { - dev_err(opt->dev, "failed to write register %02x\n", - OPT3001_LOW_LIMIT); - return ret; + if (opt->use_irq) { + /* + * Enable the end-of-conversion interrupt mechanism. Note that + * doing so will overwrite the low-level limit value however we + * will restore this value later on. + */ + ret = i2c_smbus_write_word_swapped(opt->client, + OPT3001_LOW_LIMIT, + OPT3001_LOW_LIMIT_EOC_ENABLE); + if (ret < 0) { + dev_err(opt->dev, "failed to write register %02x\n", + OPT3001_LOW_LIMIT); + return ret; + } + + /* Allow IRQ to access the device despite lock being set */ + opt->ok_to_ignore_lock = true; } - /* Reset data-ready indicator flag (will be set in the IRQ routine) */ + /* Reset data-ready indicator flag */ opt->result_ready = false; - /* Allow IRQ to access the device despite lock being set */ - opt->ok_to_ignore_lock = true; - /* Configure for single-conversion mode and start a new conversion */ ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION); if (ret < 0) { @@ -266,32 +278,69 @@ static int opt3001_get_lux(struct opt3001 *opt, int *val, int *val2) goto err; } - /* Wait for the IRQ to indicate the conversion is complete */ - ret = wait_event_timeout(opt->result_ready_queue, opt->result_ready, - OPT3001_RESULT_READY_TIMEOUT); + if (opt->use_irq) { + /* Wait for the IRQ to indicate the conversion is complete */ + ret = wait_event_timeout(opt->result_ready_queue, + opt->result_ready, + msecs_to_jiffies(OPT3001_RESULT_READY_LONG)); + } else { + /* Sleep for result ready time */ + timeout = (opt->int_time == OPT3001_INT_TIME_SHORT) ? + OPT3001_RESULT_READY_SHORT : OPT3001_RESULT_READY_LONG; + msleep(timeout); + + /* Check result ready flag */ + ret = i2c_smbus_read_word_swapped(opt->client, + OPT3001_CONFIGURATION); + if (ret < 0) { + dev_err(opt->dev, "failed to read register %02x\n", + OPT3001_CONFIGURATION); + goto err; + } + + if (!(ret & OPT3001_CONFIGURATION_CRF)) { + ret = -ETIMEDOUT; + goto err; + } + + /* Obtain value */ + ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_RESULT); + if (ret < 0) { + dev_err(opt->dev, "failed to read register %02x\n", + OPT3001_RESULT); + goto err; + } + opt->result = ret; + opt->result_ready = true; + } err: - /* Disallow IRQ to access the device while lock is active */ - opt->ok_to_ignore_lock = false; + if (opt->use_irq) + /* Disallow IRQ to access the device while lock is active */ + opt->ok_to_ignore_lock = false; if (ret == 0) return -ETIMEDOUT; else if (ret < 0) return ret; - /* - * Disable the end-of-conversion interrupt mechanism by restoring the - * low-level limit value (clearing OPT3001_LOW_LIMIT_EOC_ENABLE). Note - * that selectively clearing those enable bits would affect the actual - * limit value due to bit-overlap and therefore can't be done. - */ - value = (opt->low_thresh_exp << 12) | opt->low_thresh_mantissa; - ret = i2c_smbus_write_word_swapped(opt->client, OPT3001_LOW_LIMIT, - value); - if (ret < 0) { - dev_err(opt->dev, "failed to write register %02x\n", - OPT3001_LOW_LIMIT); - return ret; + if (opt->use_irq) { + /* + * Disable the end-of-conversion interrupt mechanism by + * restoring the low-level limit value (clearing + * OPT3001_LOW_LIMIT_EOC_ENABLE). Note that selectively clearing + * those enable bits would affect the actual limit value due to + * bit-overlap and therefore can't be done. + */ + value = (opt->low_thresh_exp << 12) | opt->low_thresh_mantissa; + ret = i2c_smbus_write_word_swapped(opt->client, + OPT3001_LOW_LIMIT, + value); + if (ret < 0) { + dev_err(opt->dev, "failed to write register %02x\n", + OPT3001_LOW_LIMIT); + return ret; + } } exponent = OPT3001_REG_EXPONENT(opt->result); @@ -325,13 +374,13 @@ static int opt3001_set_int_time(struct opt3001 *opt, int time) reg = ret; switch (time) { - case 100000: + case OPT3001_INT_TIME_SHORT: reg &= ~OPT3001_CONFIGURATION_CT; - opt->int_time = 100000; + opt->int_time = OPT3001_INT_TIME_SHORT; break; - case 800000: + case OPT3001_INT_TIME_LONG: reg |= OPT3001_CONFIGURATION_CT; - opt->int_time = 800000; + opt->int_time = OPT3001_INT_TIME_LONG; break; default: return -EINVAL; @@ -597,9 +646,9 @@ static int opt3001_configure(struct opt3001 *opt) /* Reflect status of the device's integration time setting */ if (reg & OPT3001_CONFIGURATION_CT) - opt->int_time = 800000; + opt->int_time = OPT3001_INT_TIME_LONG; else - opt->int_time = 100000; + opt->int_time = OPT3001_INT_TIME_SHORT; /* Ensure device is in shutdown initially */ opt3001_set_mode(opt, ®, OPT3001_CONFIGURATION_M_SHUTDOWN); @@ -733,12 +782,18 @@ static int opt3001_probe(struct i2c_client *client, return ret; } - ret = request_threaded_irq(irq, NULL, opt3001_irq, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - "opt3001", iio); - if (ret) { - dev_err(dev, "failed to request IRQ #%d\n", irq); - return ret; + /* Make use of INT pin only if valid IRQ no. is given */ + if (irq > 0) { + ret = request_threaded_irq(irq, NULL, opt3001_irq, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "opt3001", iio); + if (ret) { + dev_err(dev, "failed to request IRQ #%d\n", irq); + return ret; + } + opt->use_irq = true; + } else { + dev_dbg(opt->dev, "enabling interrupt-less operation\n"); } return 0; @@ -751,7 +806,8 @@ static int opt3001_remove(struct i2c_client *client) int ret; u16 reg; - free_irq(client->irq, iio); + if (opt->use_irq) + free_irq(client->irq, iio); ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION); if (ret < 0) { diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig index 868abada3409..021dc5361f53 100644 --- a/drivers/iio/magnetometer/Kconfig +++ b/drivers/iio/magnetometer/Kconfig @@ -105,4 +105,37 @@ config IIO_ST_MAGN_SPI_3AXIS depends on IIO_ST_MAGN_3AXIS depends on IIO_ST_SENSORS_SPI +config SENSORS_HMC5843 + tristate + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + +config SENSORS_HMC5843_I2C + tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)" + depends on I2C + select SENSORS_HMC5843 + select REGMAP_I2C + help + Say Y here to add support for the Honeywell HMC5843, HMC5883 and + HMC5883L 3-Axis Magnetometer (digital compass). + + This driver can also be compiled as a set of modules. + If so, these modules will be created: + - hmc5843_core (core functions) + - hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983) + +config SENSORS_HMC5843_SPI + tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)" + depends on SPI_MASTER + select SENSORS_HMC5843 + select REGMAP_SPI + help + Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer + (digital compass). + + This driver can also be compiled as a set of modules. + If so, these modules will be created: + - hmc5843_core (core functions) + - hmc5843_spi (support for HMC5983) + endmenu diff --git a/drivers/iio/magnetometer/Makefile b/drivers/iio/magnetometer/Makefile index 2c72df458ec2..dd03fe524481 100644 --- a/drivers/iio/magnetometer/Makefile +++ b/drivers/iio/magnetometer/Makefile @@ -15,3 +15,7 @@ st_magn-$(CONFIG_IIO_BUFFER) += st_magn_buffer.o obj-$(CONFIG_IIO_ST_MAGN_I2C_3AXIS) += st_magn_i2c.o obj-$(CONFIG_IIO_ST_MAGN_SPI_3AXIS) += st_magn_spi.o + +obj-$(CONFIG_SENSORS_HMC5843) += hmc5843_core.o +obj-$(CONFIG_SENSORS_HMC5843_I2C) += hmc5843_i2c.o +obj-$(CONFIG_SENSORS_HMC5843_SPI) += hmc5843_spi.o diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c index b13936dacc78..9c5c9ef3f1da 100644 --- a/drivers/iio/magnetometer/ak8975.c +++ b/drivers/iio/magnetometer/ak8975.c @@ -252,7 +252,7 @@ struct ak_def { u8 data_regs[3]; }; -static struct ak_def ak_def_array[AK_MAX_TYPE] = { +static const struct ak_def ak_def_array[AK_MAX_TYPE] = { { .type = AK8975, .raw_to_gauss = ak8975_raw_to_gauss, @@ -360,7 +360,7 @@ static struct ak_def ak_def_array[AK_MAX_TYPE] = { */ struct ak8975_data { struct i2c_client *client; - struct ak_def *def; + const struct ak_def *def; struct attribute_group attrs; struct mutex lock; u8 asa[3]; diff --git a/drivers/iio/magnetometer/hmc5843.h b/drivers/iio/magnetometer/hmc5843.h new file mode 100644 index 000000000000..76a5d7484d8d --- /dev/null +++ b/drivers/iio/magnetometer/hmc5843.h @@ -0,0 +1,65 @@ +/* + * Header file for hmc5843 driver + * + * Split from hmc5843.c + * Copyright (C) Josef Gajdusek <atx@atx.name> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef HMC5843_CORE_H +#define HMC5843_CORE_H + +#include <linux/regmap.h> +#include <linux/iio/iio.h> + +#define HMC5843_CONFIG_REG_A 0x00 +#define HMC5843_CONFIG_REG_B 0x01 +#define HMC5843_MODE_REG 0x02 +#define HMC5843_DATA_OUT_MSB_REGS 0x03 +#define HMC5843_STATUS_REG 0x09 +#define HMC5843_ID_REG 0x0a +#define HMC5843_ID_END 0x0c + +enum hmc5843_ids { + HMC5843_ID, + HMC5883_ID, + HMC5883L_ID, + HMC5983_ID, +}; + +/** + * struct hcm5843_data - device specific data + * @dev: actual device + * @lock: update and read regmap data + * @regmap: hardware access register maps + * @variant: describe chip variants + * @buffer: 3x 16-bit channels + padding + 64-bit timestamp + */ +struct hmc5843_data { + struct device *dev; + struct mutex lock; + struct regmap *regmap; + const struct hmc5843_chip_info *variant; + __be16 buffer[8]; +}; + +int hmc5843_common_probe(struct device *dev, struct regmap *regmap, + enum hmc5843_ids id, const char *name); +int hmc5843_common_remove(struct device *dev); + +int hmc5843_common_suspend(struct device *dev); +int hmc5843_common_resume(struct device *dev); + +#ifdef CONFIG_PM_SLEEP +static SIMPLE_DEV_PM_OPS(hmc5843_pm_ops, + hmc5843_common_suspend, + hmc5843_common_resume); +#define HMC5843_PM_OPS (&hmc5843_pm_ops) +#else +#define HMC5843_PM_OPS NULL +#endif + +#endif /* HMC5843_CORE_H */ diff --git a/drivers/iio/magnetometer/hmc5843_core.c b/drivers/iio/magnetometer/hmc5843_core.c new file mode 100644 index 000000000000..77882b466e0f --- /dev/null +++ b/drivers/iio/magnetometer/hmc5843_core.c @@ -0,0 +1,686 @@ +/* + * Device driver for the the HMC5843 multi-chip module designed + * for low field magnetic sensing. + * + * Copyright (C) 2010 Texas Instruments + * + * Author: Shubhrajyoti Datta <shubhrajyoti@ti.com> + * Acknowledgment: Jonathan Cameron <jic23@kernel.org> for valuable inputs. + * Support for HMC5883 and HMC5883L by Peter Meerwald <pmeerw@pmeerw.net>. + * Split to multiple files by Josef Gajdusek <atx@atx.name> - 2014 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/buffer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/delay.h> + +#include "hmc5843.h" + +/* + * Range gain settings in (+-)Ga + * Beware: HMC5843 and HMC5883 have different recommended sensor field + * ranges; default corresponds to +-1.0 Ga and +-1.3 Ga, respectively + */ +#define HMC5843_RANGE_GAIN_OFFSET 0x05 +#define HMC5843_RANGE_GAIN_DEFAULT 0x01 +#define HMC5843_RANGE_GAIN_MASK 0xe0 + +/* Device status */ +#define HMC5843_DATA_READY 0x01 +#define HMC5843_DATA_OUTPUT_LOCK 0x02 + +/* Mode register configuration */ +#define HMC5843_MODE_CONVERSION_CONTINUOUS 0x00 +#define HMC5843_MODE_CONVERSION_SINGLE 0x01 +#define HMC5843_MODE_IDLE 0x02 +#define HMC5843_MODE_SLEEP 0x03 +#define HMC5843_MODE_MASK 0x03 + +/* + * HMC5843: Minimum data output rate + * HMC5883: Typical data output rate + */ +#define HMC5843_RATE_OFFSET 0x02 +#define HMC5843_RATE_DEFAULT 0x04 +#define HMC5843_RATE_MASK 0x1c + +/* Device measurement configuration */ +#define HMC5843_MEAS_CONF_NORMAL 0x00 +#define HMC5843_MEAS_CONF_POSITIVE_BIAS 0x01 +#define HMC5843_MEAS_CONF_NEGATIVE_BIAS 0x02 +#define HMC5843_MEAS_CONF_MASK 0x03 + +/* + * API for setting the measurement configuration to + * Normal, Positive bias and Negative bias + * + * From the datasheet: + * 0 - Normal measurement configuration (default): In normal measurement + * configuration the device follows normal measurement flow. Pins BP + * and BN are left floating and high impedance. + * + * 1 - Positive bias configuration: In positive bias configuration, a + * positive current is forced across the resistive load on pins BP + * and BN. + * + * 2 - Negative bias configuration. In negative bias configuration, a + * negative current is forced across the resistive load on pins BP + * and BN. + * + * 3 - Only available on HMC5983. Magnetic sensor is disabled. + * Temperature sensor is enabled. + */ + +static const char *const hmc5843_meas_conf_modes[] = {"normal", "positivebias", + "negativebias"}; + +static const char *const hmc5983_meas_conf_modes[] = {"normal", "positivebias", + "negativebias", + "disabled"}; +/* Scaling factors: 10000000/Gain */ +static const int hmc5843_regval_to_nanoscale[] = { + 6173, 7692, 10309, 12821, 18868, 21739, 25641, 35714 +}; + +static const int hmc5883_regval_to_nanoscale[] = { + 7812, 9766, 13021, 16287, 24096, 27701, 32573, 45662 +}; + +static const int hmc5883l_regval_to_nanoscale[] = { + 7299, 9174, 12195, 15152, 22727, 25641, 30303, 43478 +}; + +/* + * From the datasheet: + * Value | HMC5843 | HMC5883/HMC5883L + * | Data output rate (Hz) | Data output rate (Hz) + * 0 | 0.5 | 0.75 + * 1 | 1 | 1.5 + * 2 | 2 | 3 + * 3 | 5 | 7.5 + * 4 | 10 (default) | 15 + * 5 | 20 | 30 + * 6 | 50 | 75 + * 7 | Not used | Not used + */ +static const int hmc5843_regval_to_samp_freq[][2] = { + {0, 500000}, {1, 0}, {2, 0}, {5, 0}, {10, 0}, {20, 0}, {50, 0} +}; + +static const int hmc5883_regval_to_samp_freq[][2] = { + {0, 750000}, {1, 500000}, {3, 0}, {7, 500000}, {15, 0}, {30, 0}, + {75, 0} +}; + +static const int hmc5983_regval_to_samp_freq[][2] = { + {0, 750000}, {1, 500000}, {3, 0}, {7, 500000}, {15, 0}, {30, 0}, + {75, 0}, {220, 0} +}; + +/* Describe chip variants */ +struct hmc5843_chip_info { + const struct iio_chan_spec *channels; + const int (*regval_to_samp_freq)[2]; + const int n_regval_to_samp_freq; + const int *regval_to_nanoscale; + const int n_regval_to_nanoscale; +}; + +/* The lower two bits contain the current conversion mode */ +static s32 hmc5843_set_mode(struct hmc5843_data *data, u8 operating_mode) +{ + int ret; + + mutex_lock(&data->lock); + ret = regmap_update_bits(data->regmap, HMC5843_MODE_REG, + HMC5843_MODE_MASK, operating_mode); + mutex_unlock(&data->lock); + + return ret; +} + +static int hmc5843_wait_measurement(struct hmc5843_data *data) +{ + int tries = 150; + unsigned int val; + int ret; + + while (tries-- > 0) { + ret = regmap_read(data->regmap, HMC5843_STATUS_REG, &val); + if (ret < 0) + return ret; + if (val & HMC5843_DATA_READY) + break; + msleep(20); + } + + if (tries < 0) { + dev_err(data->dev, "data not ready\n"); + return -EIO; + } + + return 0; +} + +/* Return the measurement value from the specified channel */ +static int hmc5843_read_measurement(struct hmc5843_data *data, + int idx, int *val) +{ + __be16 values[3]; + int ret; + + mutex_lock(&data->lock); + ret = hmc5843_wait_measurement(data); + if (ret < 0) { + mutex_unlock(&data->lock); + return ret; + } + ret = regmap_bulk_read(data->regmap, HMC5843_DATA_OUT_MSB_REGS, + values, sizeof(values)); + mutex_unlock(&data->lock); + if (ret < 0) + return ret; + + *val = sign_extend32(be16_to_cpu(values[idx]), 15); + return IIO_VAL_INT; +} + +static int hmc5843_set_meas_conf(struct hmc5843_data *data, u8 meas_conf) +{ + int ret; + + mutex_lock(&data->lock); + ret = regmap_update_bits(data->regmap, HMC5843_CONFIG_REG_A, + HMC5843_MEAS_CONF_MASK, meas_conf); + mutex_unlock(&data->lock); + + return ret; +} + +static +int hmc5843_show_measurement_configuration(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct hmc5843_data *data = iio_priv(indio_dev); + unsigned int val; + int ret; + + ret = regmap_read(data->regmap, HMC5843_CONFIG_REG_A, &val); + if (ret) + return ret; + + return val & HMC5843_MEAS_CONF_MASK; +} + +static +int hmc5843_set_measurement_configuration(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + unsigned int meas_conf) +{ + struct hmc5843_data *data = iio_priv(indio_dev); + + return hmc5843_set_meas_conf(data, meas_conf); +} + +static const struct iio_enum hmc5843_meas_conf_enum = { + .items = hmc5843_meas_conf_modes, + .num_items = ARRAY_SIZE(hmc5843_meas_conf_modes), + .get = hmc5843_show_measurement_configuration, + .set = hmc5843_set_measurement_configuration, +}; + +static const struct iio_chan_spec_ext_info hmc5843_ext_info[] = { + IIO_ENUM("meas_conf", true, &hmc5843_meas_conf_enum), + IIO_ENUM_AVAILABLE("meas_conf", &hmc5843_meas_conf_enum), + { }, +}; + +static const struct iio_enum hmc5983_meas_conf_enum = { + .items = hmc5983_meas_conf_modes, + .num_items = ARRAY_SIZE(hmc5983_meas_conf_modes), + .get = hmc5843_show_measurement_configuration, + .set = hmc5843_set_measurement_configuration, +}; + +static const struct iio_chan_spec_ext_info hmc5983_ext_info[] = { + IIO_ENUM("meas_conf", true, &hmc5983_meas_conf_enum), + IIO_ENUM_AVAILABLE("meas_conf", &hmc5983_meas_conf_enum), + { }, +}; + +static +ssize_t hmc5843_show_samp_freq_avail(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct hmc5843_data *data = iio_priv(dev_to_iio_dev(dev)); + size_t len = 0; + int i; + + for (i = 0; i < data->variant->n_regval_to_samp_freq; i++) + len += scnprintf(buf + len, PAGE_SIZE - len, + "%d.%d ", data->variant->regval_to_samp_freq[i][0], + data->variant->regval_to_samp_freq[i][1]); + + /* replace trailing space by newline */ + buf[len - 1] = '\n'; + + return len; +} + +static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(hmc5843_show_samp_freq_avail); + +static int hmc5843_set_samp_freq(struct hmc5843_data *data, u8 rate) +{ + int ret; + + mutex_lock(&data->lock); + ret = regmap_update_bits(data->regmap, HMC5843_CONFIG_REG_A, + HMC5843_RATE_MASK, + rate << HMC5843_RATE_OFFSET); + mutex_unlock(&data->lock); + + return ret; +} + +static int hmc5843_get_samp_freq_index(struct hmc5843_data *data, + int val, int val2) +{ + int i; + + for (i = 0; i < data->variant->n_regval_to_samp_freq; i++) + if (val == data->variant->regval_to_samp_freq[i][0] && + val2 == data->variant->regval_to_samp_freq[i][1]) + return i; + + return -EINVAL; +} + +static int hmc5843_set_range_gain(struct hmc5843_data *data, u8 range) +{ + int ret; + + mutex_lock(&data->lock); + ret = regmap_update_bits(data->regmap, HMC5843_CONFIG_REG_B, + HMC5843_RANGE_GAIN_MASK, + range << HMC5843_RANGE_GAIN_OFFSET); + mutex_unlock(&data->lock); + + return ret; +} + +static ssize_t hmc5843_show_scale_avail(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hmc5843_data *data = iio_priv(dev_to_iio_dev(dev)); + + size_t len = 0; + int i; + + for (i = 0; i < data->variant->n_regval_to_nanoscale; i++) + len += scnprintf(buf + len, PAGE_SIZE - len, + "0.%09d ", data->variant->regval_to_nanoscale[i]); + + /* replace trailing space by newline */ + buf[len - 1] = '\n'; + + return len; +} + +static IIO_DEVICE_ATTR(scale_available, S_IRUGO, + hmc5843_show_scale_avail, NULL, 0); + +static int hmc5843_get_scale_index(struct hmc5843_data *data, int val, int val2) +{ + int i; + + if (val) + return -EINVAL; + + for (i = 0; i < data->variant->n_regval_to_nanoscale; i++) + if (val2 == data->variant->regval_to_nanoscale[i]) + return i; + + return -EINVAL; +} + +static int hmc5843_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct hmc5843_data *data = iio_priv(indio_dev); + unsigned int rval; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + return hmc5843_read_measurement(data, chan->scan_index, val); + case IIO_CHAN_INFO_SCALE: + ret = regmap_read(data->regmap, HMC5843_CONFIG_REG_B, &rval); + if (ret < 0) + return ret; + rval >>= HMC5843_RANGE_GAIN_OFFSET; + *val = 0; + *val2 = data->variant->regval_to_nanoscale[rval]; + return IIO_VAL_INT_PLUS_NANO; + case IIO_CHAN_INFO_SAMP_FREQ: + ret = regmap_read(data->regmap, HMC5843_CONFIG_REG_A, &rval); + if (ret < 0) + return ret; + rval >>= HMC5843_RATE_OFFSET; + *val = data->variant->regval_to_samp_freq[rval][0]; + *val2 = data->variant->regval_to_samp_freq[rval][1]; + return IIO_VAL_INT_PLUS_MICRO; + } + return -EINVAL; +} + +static int hmc5843_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct hmc5843_data *data = iio_priv(indio_dev); + int rate, range; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + rate = hmc5843_get_samp_freq_index(data, val, val2); + if (rate < 0) + return -EINVAL; + + return hmc5843_set_samp_freq(data, rate); + case IIO_CHAN_INFO_SCALE: + range = hmc5843_get_scale_index(data, val, val2); + if (range < 0) + return -EINVAL; + + return hmc5843_set_range_gain(data, range); + default: + return -EINVAL; + } +} + +static int hmc5843_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_SCALE: + return IIO_VAL_INT_PLUS_NANO; + default: + return -EINVAL; + } +} + +static irqreturn_t hmc5843_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct hmc5843_data *data = iio_priv(indio_dev); + int ret; + + mutex_lock(&data->lock); + ret = hmc5843_wait_measurement(data); + if (ret < 0) { + mutex_unlock(&data->lock); + goto done; + } + + ret = regmap_bulk_read(data->regmap, HMC5843_DATA_OUT_MSB_REGS, + data->buffer, 3 * sizeof(__be16)); + + mutex_unlock(&data->lock); + if (ret < 0) + goto done; + + iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, + iio_get_time_ns()); + +done: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +#define HMC5843_CHANNEL(axis, idx) \ + { \ + .type = IIO_MAGN, \ + .modified = 1, \ + .channel2 = IIO_MOD_##axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = idx, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_BE, \ + }, \ + .ext_info = hmc5843_ext_info, \ + } + +#define HMC5983_CHANNEL(axis, idx) \ + { \ + .type = IIO_MAGN, \ + .modified = 1, \ + .channel2 = IIO_MOD_##axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = idx, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_BE, \ + }, \ + .ext_info = hmc5983_ext_info, \ + } + +static const struct iio_chan_spec hmc5843_channels[] = { + HMC5843_CHANNEL(X, 0), + HMC5843_CHANNEL(Y, 1), + HMC5843_CHANNEL(Z, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +/* Beware: Y and Z are exchanged on HMC5883 and 5983 */ +static const struct iio_chan_spec hmc5883_channels[] = { + HMC5843_CHANNEL(X, 0), + HMC5843_CHANNEL(Z, 1), + HMC5843_CHANNEL(Y, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +static const struct iio_chan_spec hmc5983_channels[] = { + HMC5983_CHANNEL(X, 0), + HMC5983_CHANNEL(Z, 1), + HMC5983_CHANNEL(Y, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +static struct attribute *hmc5843_attributes[] = { + &iio_dev_attr_scale_available.dev_attr.attr, + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group hmc5843_group = { + .attrs = hmc5843_attributes, +}; + +static const struct hmc5843_chip_info hmc5843_chip_info_tbl[] = { + [HMC5843_ID] = { + .channels = hmc5843_channels, + .regval_to_samp_freq = hmc5843_regval_to_samp_freq, + .n_regval_to_samp_freq = + ARRAY_SIZE(hmc5843_regval_to_samp_freq), + .regval_to_nanoscale = hmc5843_regval_to_nanoscale, + .n_regval_to_nanoscale = + ARRAY_SIZE(hmc5843_regval_to_nanoscale), + }, + [HMC5883_ID] = { + .channels = hmc5883_channels, + .regval_to_samp_freq = hmc5883_regval_to_samp_freq, + .n_regval_to_samp_freq = + ARRAY_SIZE(hmc5883_regval_to_samp_freq), + .regval_to_nanoscale = hmc5883_regval_to_nanoscale, + .n_regval_to_nanoscale = + ARRAY_SIZE(hmc5883_regval_to_nanoscale), + }, + [HMC5883L_ID] = { + .channels = hmc5883_channels, + .regval_to_samp_freq = hmc5883_regval_to_samp_freq, + .n_regval_to_samp_freq = + ARRAY_SIZE(hmc5883_regval_to_samp_freq), + .regval_to_nanoscale = hmc5883l_regval_to_nanoscale, + .n_regval_to_nanoscale = + ARRAY_SIZE(hmc5883l_regval_to_nanoscale), + }, + [HMC5983_ID] = { + .channels = hmc5983_channels, + .regval_to_samp_freq = hmc5983_regval_to_samp_freq, + .n_regval_to_samp_freq = + ARRAY_SIZE(hmc5983_regval_to_samp_freq), + .regval_to_nanoscale = hmc5883l_regval_to_nanoscale, + .n_regval_to_nanoscale = + ARRAY_SIZE(hmc5883l_regval_to_nanoscale), + } +}; + +static int hmc5843_init(struct hmc5843_data *data) +{ + int ret; + u8 id[3]; + + ret = regmap_bulk_read(data->regmap, HMC5843_ID_REG, + id, ARRAY_SIZE(id)); + if (ret < 0) + return ret; + if (id[0] != 'H' || id[1] != '4' || id[2] != '3') { + dev_err(data->dev, "no HMC5843/5883/5883L/5983 sensor\n"); + return -ENODEV; + } + + ret = hmc5843_set_meas_conf(data, HMC5843_MEAS_CONF_NORMAL); + if (ret < 0) + return ret; + ret = hmc5843_set_samp_freq(data, HMC5843_RATE_DEFAULT); + if (ret < 0) + return ret; + ret = hmc5843_set_range_gain(data, HMC5843_RANGE_GAIN_DEFAULT); + if (ret < 0) + return ret; + return hmc5843_set_mode(data, HMC5843_MODE_CONVERSION_CONTINUOUS); +} + +static const struct iio_info hmc5843_info = { + .attrs = &hmc5843_group, + .read_raw = &hmc5843_read_raw, + .write_raw = &hmc5843_write_raw, + .write_raw_get_fmt = &hmc5843_write_raw_get_fmt, + .driver_module = THIS_MODULE, +}; + +static const unsigned long hmc5843_scan_masks[] = {0x7, 0}; + +int hmc5843_common_suspend(struct device *dev) +{ + return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)), + HMC5843_MODE_SLEEP); +} +EXPORT_SYMBOL(hmc5843_common_suspend); + +int hmc5843_common_resume(struct device *dev) +{ + return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)), + HMC5843_MODE_CONVERSION_CONTINUOUS); +} +EXPORT_SYMBOL(hmc5843_common_resume); + +int hmc5843_common_probe(struct device *dev, struct regmap *regmap, + enum hmc5843_ids id, const char *name) +{ + struct hmc5843_data *data; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + dev_set_drvdata(dev, indio_dev); + + /* default settings at probe */ + data = iio_priv(indio_dev); + data->dev = dev; + data->regmap = regmap; + data->variant = &hmc5843_chip_info_tbl[id]; + mutex_init(&data->lock); + + indio_dev->dev.parent = dev; + indio_dev->name = name; + indio_dev->info = &hmc5843_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = data->variant->channels; + indio_dev->num_channels = 4; + indio_dev->available_scan_masks = hmc5843_scan_masks; + + ret = hmc5843_init(data); + if (ret < 0) + return ret; + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + hmc5843_trigger_handler, NULL); + if (ret < 0) + goto buffer_setup_err; + + ret = iio_device_register(indio_dev); + if (ret < 0) + goto buffer_cleanup; + + return 0; + +buffer_cleanup: + iio_triggered_buffer_cleanup(indio_dev); +buffer_setup_err: + hmc5843_set_mode(iio_priv(indio_dev), HMC5843_MODE_SLEEP); + return ret; +} +EXPORT_SYMBOL(hmc5843_common_probe); + +int hmc5843_common_remove(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + + /* sleep mode to save power */ + hmc5843_set_mode(iio_priv(indio_dev), HMC5843_MODE_SLEEP); + + return 0; +} +EXPORT_SYMBOL(hmc5843_common_remove); + +MODULE_AUTHOR("Shubhrajyoti Datta <shubhrajyoti@ti.com>"); +MODULE_DESCRIPTION("HMC5843/5883/5883L/5983 core driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/magnetometer/hmc5843_i2c.c b/drivers/iio/magnetometer/hmc5843_i2c.c new file mode 100644 index 000000000000..3de7f4426ac4 --- /dev/null +++ b/drivers/iio/magnetometer/hmc5843_i2c.c @@ -0,0 +1,103 @@ +/* + * i2c driver for hmc5843/5843/5883/5883l/5983 + * + * Split from hmc5843.c + * Copyright (C) Josef Gajdusek <atx@atx.name> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/iio/iio.h> +#include <linux/iio/triggered_buffer.h> + +#include "hmc5843.h" + +static const struct regmap_range hmc5843_readable_ranges[] = { + regmap_reg_range(0, HMC5843_ID_END), +}; + +static const struct regmap_access_table hmc5843_readable_table = { + .yes_ranges = hmc5843_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(hmc5843_readable_ranges), +}; + +static const struct regmap_range hmc5843_writable_ranges[] = { + regmap_reg_range(0, HMC5843_MODE_REG), +}; + +static const struct regmap_access_table hmc5843_writable_table = { + .yes_ranges = hmc5843_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(hmc5843_writable_ranges), +}; + +static const struct regmap_range hmc5843_volatile_ranges[] = { + regmap_reg_range(HMC5843_DATA_OUT_MSB_REGS, HMC5843_STATUS_REG), +}; + +static const struct regmap_access_table hmc5843_volatile_table = { + .yes_ranges = hmc5843_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(hmc5843_volatile_ranges), +}; + +static const struct regmap_config hmc5843_i2c_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .rd_table = &hmc5843_readable_table, + .wr_table = &hmc5843_writable_table, + .volatile_table = &hmc5843_volatile_table, + + .cache_type = REGCACHE_RBTREE, +}; + +static int hmc5843_i2c_probe(struct i2c_client *cli, + const struct i2c_device_id *id) +{ + return hmc5843_common_probe(&cli->dev, + devm_regmap_init_i2c(cli, &hmc5843_i2c_regmap_config), + id->driver_data, id->name); +} + +static int hmc5843_i2c_remove(struct i2c_client *client) +{ + return hmc5843_common_remove(&client->dev); +} + +static const struct i2c_device_id hmc5843_id[] = { + { "hmc5843", HMC5843_ID }, + { "hmc5883", HMC5883_ID }, + { "hmc5883l", HMC5883L_ID }, + { "hmc5983", HMC5983_ID }, + { } +}; +MODULE_DEVICE_TABLE(i2c, hmc5843_id); + +static const struct of_device_id hmc5843_of_match[] = { + { .compatible = "honeywell,hmc5843", .data = (void *)HMC5843_ID }, + { .compatible = "honeywell,hmc5883", .data = (void *)HMC5883_ID }, + { .compatible = "honeywell,hmc5883l", .data = (void *)HMC5883L_ID }, + { .compatible = "honeywell,hmc5983", .data = (void *)HMC5983_ID }, + {} +}; +MODULE_DEVICE_TABLE(of, hmc5843_of_match); + +static struct i2c_driver hmc5843_driver = { + .driver = { + .name = "hmc5843", + .pm = HMC5843_PM_OPS, + .of_match_table = hmc5843_of_match, + }, + .id_table = hmc5843_id, + .probe = hmc5843_i2c_probe, + .remove = hmc5843_i2c_remove, +}; +module_i2c_driver(hmc5843_driver); + +MODULE_AUTHOR("Josef Gajdusek <atx@atx.name>"); +MODULE_DESCRIPTION("HMC5843/5883/5883L/5983 i2c driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/magnetometer/hmc5843_spi.c b/drivers/iio/magnetometer/hmc5843_spi.c new file mode 100644 index 000000000000..535f03a70d63 --- /dev/null +++ b/drivers/iio/magnetometer/hmc5843_spi.c @@ -0,0 +1,100 @@ +/* + * SPI driver for hmc5983 + * + * Copyright (C) Josef Gajdusek <atx@atx.name> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/iio/iio.h> + +#include "hmc5843.h" + +static const struct regmap_range hmc5843_readable_ranges[] = { + regmap_reg_range(0, HMC5843_ID_END), +}; + +static const struct regmap_access_table hmc5843_readable_table = { + .yes_ranges = hmc5843_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(hmc5843_readable_ranges), +}; + +static const struct regmap_range hmc5843_writable_ranges[] = { + regmap_reg_range(0, HMC5843_MODE_REG), +}; + +static const struct regmap_access_table hmc5843_writable_table = { + .yes_ranges = hmc5843_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(hmc5843_writable_ranges), +}; + +static const struct regmap_range hmc5843_volatile_ranges[] = { + regmap_reg_range(HMC5843_DATA_OUT_MSB_REGS, HMC5843_STATUS_REG), +}; + +static const struct regmap_access_table hmc5843_volatile_table = { + .yes_ranges = hmc5843_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(hmc5843_volatile_ranges), +}; + +static const struct regmap_config hmc5843_spi_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .rd_table = &hmc5843_readable_table, + .wr_table = &hmc5843_writable_table, + .volatile_table = &hmc5843_volatile_table, + + /* Autoincrement address pointer */ + .read_flag_mask = 0xc0, + + .cache_type = REGCACHE_RBTREE, +}; + +static int hmc5843_spi_probe(struct spi_device *spi) +{ + int ret; + const struct spi_device_id *id = spi_get_device_id(spi); + + spi->mode = SPI_MODE_3; + spi->max_speed_hz = 8000000; + spi->bits_per_word = 8; + ret = spi_setup(spi); + if (ret) + return ret; + + return hmc5843_common_probe(&spi->dev, + devm_regmap_init_spi(spi, &hmc5843_spi_regmap_config), + id->driver_data, id->name); +} + +static int hmc5843_spi_remove(struct spi_device *spi) +{ + return hmc5843_common_remove(&spi->dev); +} + +static const struct spi_device_id hmc5843_id[] = { + { "hmc5983", HMC5983_ID }, + { } +}; +MODULE_DEVICE_TABLE(spi, hmc5843_id); + +static struct spi_driver hmc5843_driver = { + .driver = { + .name = "hmc5843", + .pm = HMC5843_PM_OPS, + }, + .id_table = hmc5843_id, + .probe = hmc5843_spi_probe, + .remove = hmc5843_spi_remove, +}; + +module_spi_driver(hmc5843_driver); + +MODULE_AUTHOR("Josef Gajdusek <atx@atx.name>"); +MODULE_DESCRIPTION("HMC5983 SPI driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c index b27f0146647b..501f858df413 100644 --- a/drivers/iio/magnetometer/st_magn_core.c +++ b/drivers/iio/magnetometer/st_magn_core.c @@ -175,6 +175,8 @@ #define ST_MAGN_3_BDU_MASK 0x10 #define ST_MAGN_3_DRDY_IRQ_ADDR 0x62 #define ST_MAGN_3_DRDY_INT_MASK 0x01 +#define ST_MAGN_3_IHL_IRQ_ADDR 0x63 +#define ST_MAGN_3_IHL_IRQ_MASK 0x04 #define ST_MAGN_3_FS_AVL_15000_GAIN 1500 #define ST_MAGN_3_MULTIREAD_BIT false #define ST_MAGN_3_OUT_X_L_ADDR 0x68 @@ -480,6 +482,8 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = { .drdy_irq = { .addr = ST_MAGN_3_DRDY_IRQ_ADDR, .mask_int1 = ST_MAGN_3_DRDY_INT_MASK, + .addr_ihl = ST_MAGN_3_IHL_IRQ_ADDR, + .mask_ihl = ST_MAGN_3_IHL_IRQ_MASK, }, .multi_read_bit = ST_MAGN_3_MULTIREAD_BIT, .bootime = 2, diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig index fd75db73e582..ffc735c168fb 100644 --- a/drivers/iio/potentiometer/Kconfig +++ b/drivers/iio/potentiometer/Kconfig @@ -17,4 +17,16 @@ config MCP4531 To compile this driver as a module, choose M here: the module will be called mcp4531. +config TPL0102 + tristate "Texas Instruments digital potentiometer driver" + depends on I2C + select REGMAP_I2C + help + Say yes here to build support for the Texas Instruments + TPL0102, TPL0402 + digital potentiometer chips. + + To compile this driver as a module, choose M here: the + module will be called tpl0102. + endmenu diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile index 8afe49227012..b563b492b486 100644 --- a/drivers/iio/potentiometer/Makefile +++ b/drivers/iio/potentiometer/Makefile @@ -4,3 +4,4 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_MCP4531) += mcp4531.o +obj-$(CONFIG_TPL0102) += tpl0102.o diff --git a/drivers/iio/potentiometer/mcp4531.c b/drivers/iio/potentiometer/mcp4531.c index a3f66874ee2e..0db67fe14766 100644 --- a/drivers/iio/potentiometer/mcp4531.c +++ b/drivers/iio/potentiometer/mcp4531.c @@ -159,7 +159,7 @@ static int mcp4531_probe(struct i2c_client *client, if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) { dev_err(dev, "SMBUS Word Data not supported\n"); - return -EIO; + return -EOPNOTSUPP; } indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); diff --git a/drivers/iio/potentiometer/tpl0102.c b/drivers/iio/potentiometer/tpl0102.c new file mode 100644 index 000000000000..313124b6fd59 --- /dev/null +++ b/drivers/iio/potentiometer/tpl0102.c @@ -0,0 +1,166 @@ +/* + * tpl0102.c - Support for Texas Instruments digital potentiometers + * + * Copyright (C) 2016 Matt Ranostay <mranostay@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * TODO: enable/disable hi-z output control + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/iio/iio.h> + +struct tpl0102_cfg { + int wipers; + int max_pos; + int kohms; +}; + +enum tpl0102_type { + CAT5140_503, + CAT5140_104, + TPL0102_104, + TPL0401_103, +}; + +static const struct tpl0102_cfg tpl0102_cfg[] = { + /* on-semiconductor parts */ + [CAT5140_503] = { .wipers = 1, .max_pos = 256, .kohms = 50, }, + [CAT5140_104] = { .wipers = 1, .max_pos = 256, .kohms = 100, }, + /* ti parts */ + [TPL0102_104] = { .wipers = 2, .max_pos = 256, .kohms = 100 }, + [TPL0401_103] = { .wipers = 1, .max_pos = 128, .kohms = 10, }, +}; + +struct tpl0102_data { + struct regmap *regmap; + unsigned long devid; +}; + +static const struct regmap_config tpl0102_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +#define TPL0102_CHANNEL(ch) { \ + .type = IIO_RESISTANCE, \ + .indexed = 1, \ + .output = 1, \ + .channel = (ch), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ +} + +static const struct iio_chan_spec tpl0102_channels[] = { + TPL0102_CHANNEL(0), + TPL0102_CHANNEL(1), +}; + +static int tpl0102_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct tpl0102_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: { + int ret = regmap_read(data->regmap, chan->channel, val); + + return ret ? ret : IIO_VAL_INT; + } + case IIO_CHAN_INFO_SCALE: + *val = 1000 * tpl0102_cfg[data->devid].kohms; + *val2 = tpl0102_cfg[data->devid].max_pos; + return IIO_VAL_FRACTIONAL; + } + + return -EINVAL; +} + +static int tpl0102_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct tpl0102_data *data = iio_priv(indio_dev); + + if (mask != IIO_CHAN_INFO_RAW) + return -EINVAL; + + if (val >= tpl0102_cfg[data->devid].max_pos || val < 0) + return -EINVAL; + + return regmap_write(data->regmap, chan->channel, val); +} + +static const struct iio_info tpl0102_info = { + .read_raw = tpl0102_read_raw, + .write_raw = tpl0102_write_raw, + .driver_module = THIS_MODULE, +}; + +static int tpl0102_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct tpl0102_data *data; + struct iio_dev *indio_dev; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WORD_DATA)) + return -ENOTSUPP; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + + data->devid = id->driver_data; + data->regmap = devm_regmap_init_i2c(client, &tpl0102_regmap_config); + if (IS_ERR(data->regmap)) { + dev_err(dev, "regmap initialization failed\n"); + return PTR_ERR(data->regmap); + } + + indio_dev->dev.parent = dev; + indio_dev->info = &tpl0102_info; + indio_dev->channels = tpl0102_channels; + indio_dev->num_channels = tpl0102_cfg[data->devid].wipers; + indio_dev->name = client->name; + + return devm_iio_device_register(dev, indio_dev); +} + +static const struct i2c_device_id tpl0102_id[] = { + { "cat5140-503", CAT5140_503 }, + { "cat5140-104", CAT5140_104 }, + { "tpl0102-104", TPL0102_104 }, + { "tpl0401-103", TPL0401_103 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, tpl0102_id); + +static struct i2c_driver tpl0102_driver = { + .driver = { + .name = "tpl0102", + }, + .probe = tpl0102_probe, + .id_table = tpl0102_id, +}; + +module_i2c_driver(tpl0102_driver); + +MODULE_AUTHOR("Matt Ranostay <mranostay@gmail.com>"); +MODULE_DESCRIPTION("TPL0102 digital potentiometer"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index 6f2e7c9ac23e..31c0e1fd2202 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -10,11 +10,11 @@ config BMP280 depends on I2C select REGMAP_I2C help - Say yes here to build support for Bosch Sensortec BMP280 - pressure and temperature sensor. + Say yes here to build support for Bosch Sensortec BMP280 + pressure and temperature sensor. - To compile this driver as a module, choose M here: the module - will be called bmp280. + To compile this driver as a module, choose M here: the module + will be called bmp280. config HID_SENSOR_PRESS depends on HID_SENSOR_HUB @@ -27,18 +27,33 @@ config HID_SENSOR_PRESS Say yes here to build support for the HID SENSOR Pressure driver - To compile this driver as a module, choose M here: the module - will be called hid-sensor-press. + To compile this driver as a module, choose M here: the module + will be called hid-sensor-press. config MPL115 + tristate + +config MPL115_I2C tristate "Freescale MPL115A2 pressure sensor driver" depends on I2C + select MPL115 help Say yes here to build support for the Freescale MPL115A2 pressure sensor connected via I2C. - To compile this driver as a module, choose M here: the module - will be called mpl115. + To compile this driver as a module, choose M here: the module + will be called mpl115_i2c. + +config MPL115_SPI + tristate "Freescale MPL115A1 pressure sensor driver" + depends on SPI_MASTER + select MPL115 + help + Say yes here to build support for the Freescale MPL115A1 + pressure sensor connected via SPI. + + To compile this driver as a module, choose M here: the module + will be called mpl115_spi. config MPL3115 tristate "Freescale MPL3115A2 pressure sensor driver" @@ -49,11 +64,13 @@ config MPL3115 Say yes here to build support for the Freescale MPL3115A2 pressure sensor / altimeter. - To compile this driver as a module, choose M here: the module - will be called mpl3115. + To compile this driver as a module, choose M here: the module + will be called mpl3115. config MS5611 tristate "Measurement Specialties MS5611 pressure sensor driver" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say Y here to build support for the Measurement Specialties MS5611, MS5607 pressure and temperature sensors. @@ -82,7 +99,7 @@ config MS5611_SPI config MS5637 tristate "Measurement Specialties MS5637 pressure & temperature sensor" depends on I2C - select IIO_MS_SENSORS_I2C + select IIO_MS_SENSORS_I2C help If you say yes here you get support for the Measurement Specialties MS5637 pressure and temperature sensor. @@ -128,7 +145,7 @@ config T5403 Say yes here to build support for the EPCOS T5403 pressure sensor connected via I2C. - To compile this driver as a module, choose M here: the module - will be called t5403. + To compile this driver as a module, choose M here: the module + will be called t5403. endmenu diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile index 46571c96823f..d336af14f3fe 100644 --- a/drivers/iio/pressure/Makefile +++ b/drivers/iio/pressure/Makefile @@ -6,6 +6,8 @@ obj-$(CONFIG_BMP280) += bmp280.o obj-$(CONFIG_HID_SENSOR_PRESS) += hid-sensor-press.o obj-$(CONFIG_MPL115) += mpl115.o +obj-$(CONFIG_MPL115_I2C) += mpl115_i2c.o +obj-$(CONFIG_MPL115_SPI) += mpl115_spi.o obj-$(CONFIG_MPL3115) += mpl3115.o obj-$(CONFIG_MS5611) += ms5611_core.o obj-$(CONFIG_MS5611_I2C) += ms5611_i2c.o diff --git a/drivers/iio/pressure/mpl115.c b/drivers/iio/pressure/mpl115.c index f5ecd6e19f5d..73f2f0c46e62 100644 --- a/drivers/iio/pressure/mpl115.c +++ b/drivers/iio/pressure/mpl115.c @@ -1,5 +1,5 @@ /* - * mpl115.c - Support for Freescale MPL115A2 pressure/temperature sensor + * mpl115.c - Support for Freescale MPL115A pressure/temperature sensor * * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net> * @@ -7,17 +7,16 @@ * the GNU General Public License. See the file COPYING in the main * directory of this archive for more details. * - * (7-bit I2C slave address 0x60) - * * TODO: shutdown pin * */ #include <linux/module.h> -#include <linux/i2c.h> #include <linux/iio/iio.h> #include <linux/delay.h> +#include "mpl115.h" + #define MPL115_PADC 0x00 /* pressure ADC output value, MSB first, 10 bit */ #define MPL115_TADC 0x02 /* temperature ADC output value, MSB first, 10 bit */ #define MPL115_A0 0x04 /* 12 bit integer, 3 bit fraction */ @@ -27,16 +26,18 @@ #define MPL115_CONVERT 0x12 /* convert temperature and pressure */ struct mpl115_data { - struct i2c_client *client; + struct device *dev; struct mutex lock; s16 a0; s16 b1, b2; s16 c12; + const struct mpl115_ops *ops; }; static int mpl115_request(struct mpl115_data *data) { - int ret = i2c_smbus_write_byte_data(data->client, MPL115_CONVERT, 0); + int ret = data->ops->write(data->dev, MPL115_CONVERT, 0); + if (ret < 0) return ret; @@ -57,12 +58,12 @@ static int mpl115_comp_pressure(struct mpl115_data *data, int *val, int *val2) if (ret < 0) goto done; - ret = i2c_smbus_read_word_swapped(data->client, MPL115_PADC); + ret = data->ops->read(data->dev, MPL115_PADC); if (ret < 0) goto done; padc = ret >> 6; - ret = i2c_smbus_read_word_swapped(data->client, MPL115_TADC); + ret = data->ops->read(data->dev, MPL115_TADC); if (ret < 0) goto done; tadc = ret >> 6; @@ -90,7 +91,7 @@ static int mpl115_read_temp(struct mpl115_data *data) ret = mpl115_request(data); if (ret < 0) goto done; - ret = i2c_smbus_read_word_swapped(data->client, MPL115_TADC); + ret = data->ops->read(data->dev, MPL115_TADC); done: mutex_unlock(&data->lock); return ret; @@ -117,7 +118,7 @@ static int mpl115_read_raw(struct iio_dev *indio_dev, *val = ret >> 6; return IIO_VAL_INT; case IIO_CHAN_INFO_OFFSET: - *val = 605; + *val = -605; *val2 = 750000; return IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_SCALE: @@ -145,66 +146,53 @@ static const struct iio_info mpl115_info = { .driver_module = THIS_MODULE, }; -static int mpl115_probe(struct i2c_client *client, - const struct i2c_device_id *id) +int mpl115_probe(struct device *dev, const char *name, + const struct mpl115_ops *ops) { struct mpl115_data *data; struct iio_dev *indio_dev; int ret; - if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) - return -ENODEV; - - indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); if (!indio_dev) return -ENOMEM; data = iio_priv(indio_dev); - data->client = client; + data->dev = dev; + data->ops = ops; mutex_init(&data->lock); - i2c_set_clientdata(client, indio_dev); indio_dev->info = &mpl115_info; - indio_dev->name = id->name; - indio_dev->dev.parent = &client->dev; + indio_dev->name = name; + indio_dev->dev.parent = dev; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->channels = mpl115_channels; indio_dev->num_channels = ARRAY_SIZE(mpl115_channels); - ret = i2c_smbus_read_word_swapped(data->client, MPL115_A0); + ret = data->ops->init(data->dev); + if (ret) + return ret; + + ret = data->ops->read(data->dev, MPL115_A0); if (ret < 0) return ret; data->a0 = ret; - ret = i2c_smbus_read_word_swapped(data->client, MPL115_B1); + ret = data->ops->read(data->dev, MPL115_B1); if (ret < 0) return ret; data->b1 = ret; - ret = i2c_smbus_read_word_swapped(data->client, MPL115_B2); + ret = data->ops->read(data->dev, MPL115_B2); if (ret < 0) return ret; data->b2 = ret; - ret = i2c_smbus_read_word_swapped(data->client, MPL115_C12); + ret = data->ops->read(data->dev, MPL115_C12); if (ret < 0) return ret; data->c12 = ret; - return devm_iio_device_register(&client->dev, indio_dev); + return devm_iio_device_register(dev, indio_dev); } - -static const struct i2c_device_id mpl115_id[] = { - { "mpl115", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, mpl115_id); - -static struct i2c_driver mpl115_driver = { - .driver = { - .name = "mpl115", - }, - .probe = mpl115_probe, - .id_table = mpl115_id, -}; -module_i2c_driver(mpl115_driver); +EXPORT_SYMBOL_GPL(mpl115_probe); MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); MODULE_DESCRIPTION("Freescale MPL115 pressure/temperature driver"); diff --git a/drivers/iio/pressure/mpl115.h b/drivers/iio/pressure/mpl115.h new file mode 100644 index 000000000000..01b652774dc3 --- /dev/null +++ b/drivers/iio/pressure/mpl115.h @@ -0,0 +1,24 @@ +/* + * Freescale MPL115A pressure/temperature sensor + * + * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net> + * Copyright (c) 2016 Akinobu Mita <akinobu.mita@gmail.com> + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + */ + +#ifndef _MPL115_H_ +#define _MPL115_H_ + +struct mpl115_ops { + int (*init)(struct device *); + int (*read)(struct device *, u8); + int (*write)(struct device *, u8, u8); +}; + +int mpl115_probe(struct device *dev, const char *name, + const struct mpl115_ops *ops); + +#endif diff --git a/drivers/iio/pressure/mpl115_i2c.c b/drivers/iio/pressure/mpl115_i2c.c new file mode 100644 index 000000000000..1a29be462f6e --- /dev/null +++ b/drivers/iio/pressure/mpl115_i2c.c @@ -0,0 +1,67 @@ +/* + * Freescale MPL115A2 pressure/temperature sensor + * + * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net> + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * (7-bit I2C slave address 0x60) + * + * Datasheet: http://www.nxp.com/files/sensors/doc/data_sheet/MPL115A2.pdf + */ + +#include <linux/module.h> +#include <linux/i2c.h> + +#include "mpl115.h" + +static int mpl115_i2c_init(struct device *dev) +{ + return 0; +} + +static int mpl115_i2c_read(struct device *dev, u8 address) +{ + return i2c_smbus_read_word_swapped(to_i2c_client(dev), address); +} + +static int mpl115_i2c_write(struct device *dev, u8 address, u8 value) +{ + return i2c_smbus_write_byte_data(to_i2c_client(dev), address, value); +} + +static const struct mpl115_ops mpl115_i2c_ops = { + .init = mpl115_i2c_init, + .read = mpl115_i2c_read, + .write = mpl115_i2c_write, +}; + +static int mpl115_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) + return -EOPNOTSUPP; + + return mpl115_probe(&client->dev, id->name, &mpl115_i2c_ops); +} + +static const struct i2c_device_id mpl115_i2c_id[] = { + { "mpl115", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mpl115_i2c_id); + +static struct i2c_driver mpl115_i2c_driver = { + .driver = { + .name = "mpl115", + }, + .probe = mpl115_i2c_probe, + .id_table = mpl115_i2c_id, +}; +module_i2c_driver(mpl115_i2c_driver); + +MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); +MODULE_DESCRIPTION("Freescale MPL115A2 pressure/temperature driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/pressure/mpl115_spi.c b/drivers/iio/pressure/mpl115_spi.c new file mode 100644 index 000000000000..9ebf55f5b3aa --- /dev/null +++ b/drivers/iio/pressure/mpl115_spi.c @@ -0,0 +1,106 @@ +/* + * Freescale MPL115A1 pressure/temperature sensor + * + * Copyright (c) 2016 Akinobu Mita <akinobu.mita@gmail.com> + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * Datasheet: http://www.nxp.com/files/sensors/doc/data_sheet/MPL115A1.pdf + */ + +#include <linux/module.h> +#include <linux/spi/spi.h> + +#include "mpl115.h" + +#define MPL115_SPI_WRITE(address) ((address) << 1) +#define MPL115_SPI_READ(address) (0x80 | (address) << 1) + +struct mpl115_spi_buf { + u8 tx[4]; + u8 rx[4]; +}; + +static int mpl115_spi_init(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct mpl115_spi_buf *buf; + + buf = devm_kzalloc(dev, sizeof(*buf), GFP_KERNEL); + if (!buf) + return -ENOMEM; + + spi_set_drvdata(spi, buf); + + return 0; +} + +static int mpl115_spi_read(struct device *dev, u8 address) +{ + struct spi_device *spi = to_spi_device(dev); + struct mpl115_spi_buf *buf = spi_get_drvdata(spi); + struct spi_transfer xfer = { + .tx_buf = buf->tx, + .rx_buf = buf->rx, + .len = 4, + }; + int ret; + + buf->tx[0] = MPL115_SPI_READ(address); + buf->tx[2] = MPL115_SPI_READ(address + 1); + + ret = spi_sync_transfer(spi, &xfer, 1); + if (ret) + return ret; + + return (buf->rx[1] << 8) | buf->rx[3]; +} + +static int mpl115_spi_write(struct device *dev, u8 address, u8 value) +{ + struct spi_device *spi = to_spi_device(dev); + struct mpl115_spi_buf *buf = spi_get_drvdata(spi); + struct spi_transfer xfer = { + .tx_buf = buf->tx, + .len = 2, + }; + + buf->tx[0] = MPL115_SPI_WRITE(address); + buf->tx[1] = value; + + return spi_sync_transfer(spi, &xfer, 1); +} + +static const struct mpl115_ops mpl115_spi_ops = { + .init = mpl115_spi_init, + .read = mpl115_spi_read, + .write = mpl115_spi_write, +}; + +static int mpl115_spi_probe(struct spi_device *spi) +{ + const struct spi_device_id *id = spi_get_device_id(spi); + + return mpl115_probe(&spi->dev, id->name, &mpl115_spi_ops); +} + +static const struct spi_device_id mpl115_spi_ids[] = { + { "mpl115", 0 }, + {} +}; +MODULE_DEVICE_TABLE(spi, mpl115_spi_ids); + +static struct spi_driver mpl115_spi_driver = { + .driver = { + .name = "mpl115", + }, + .probe = mpl115_spi_probe, + .id_table = mpl115_spi_ids, +}; +module_spi_driver(mpl115_spi_driver); + +MODULE_AUTHOR("Akinobu Mita <akinobu.mita@gmail.com>"); +MODULE_DESCRIPTION("Freescale MPL115A1 pressure/temperature driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/pressure/ms5611.h b/drivers/iio/pressure/ms5611.h index 23b93c797dba..8b08e4b7e3a9 100644 --- a/drivers/iio/pressure/ms5611.h +++ b/drivers/iio/pressure/ms5611.h @@ -51,6 +51,8 @@ struct ms5611_state { struct ms5611_chip_info *chip_info; }; -int ms5611_probe(struct iio_dev *indio_dev, struct device *dev, int type); +int ms5611_probe(struct iio_dev *indio_dev, struct device *dev, + const char* name, int type); +int ms5611_remove(struct iio_dev *indio_dev); #endif /* _MS5611_H */ diff --git a/drivers/iio/pressure/ms5611_core.c b/drivers/iio/pressure/ms5611_core.c index 2f3d9b4aca4e..992ad8d3b67a 100644 --- a/drivers/iio/pressure/ms5611_core.c +++ b/drivers/iio/pressure/ms5611_core.c @@ -16,7 +16,11 @@ #include <linux/module.h> #include <linux/iio/iio.h> #include <linux/delay.h> +#include <linux/regulator/consumer.h> +#include <linux/iio/buffer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/trigger_consumer.h> #include "ms5611.h" static bool ms5611_prom_is_valid(u16 *prom, size_t len) @@ -133,17 +137,17 @@ static int ms5607_temp_and_pressure_compensate(struct ms5611_chip_info *chip_inf t = 2000 + ((chip_info->prom[6] * dt) >> 23); if (t < 2000) { - s64 off2, sens2, t2; + s64 off2, sens2, t2, tmp; t2 = (dt * dt) >> 31; - off2 = (61 * (t - 2000) * (t - 2000)) >> 4; - sens2 = off2 << 1; + tmp = (t - 2000) * (t - 2000); + off2 = (61 * tmp) >> 4; + sens2 = tmp << 1; if (t < -1500) { - s64 tmp = (t + 1500) * (t + 1500); - + tmp = (t + 1500) * (t + 1500); off2 += 15 * tmp; - sens2 += (8 * tmp); + sens2 += 8 * tmp; } t -= t2; @@ -173,6 +177,28 @@ static int ms5611_reset(struct iio_dev *indio_dev) return 0; } +static irqreturn_t ms5611_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct ms5611_state *st = iio_priv(indio_dev); + s32 buf[4]; /* s32 (pressure) + s32 (temp) + 2 * s32 (timestamp) */ + int ret; + + mutex_lock(&st->lock); + ret = ms5611_read_temp_and_pressure(indio_dev, &buf[1], &buf[0]); + mutex_unlock(&st->lock); + if (ret < 0) + goto err; + + iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns()); + +err: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + static int ms5611_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) @@ -201,11 +227,25 @@ static int ms5611_read_raw(struct iio_dev *indio_dev, default: return -EINVAL; } + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_TEMP: + *val = 10; + return IIO_VAL_INT; + case IIO_PRESSURE: + *val = 0; + *val2 = 1000; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } } return -EINVAL; } +static const unsigned long ms5611_scan_masks[] = {0x3, 0}; + static struct ms5611_chip_info chip_info_tbl[] = { [MS5611] = { .temp_and_pressure_compensate = ms5611_temp_and_pressure_compensate, @@ -218,12 +258,29 @@ static struct ms5611_chip_info chip_info_tbl[] = { static const struct iio_chan_spec ms5611_channels[] = { { .type = IIO_PRESSURE, - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 0, + .scan_type = { + .sign = 's', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_CPU, + }, }, { .type = IIO_TEMP, - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), - } + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 1, + .scan_type = { + .sign = 's', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_CPU, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(2), }; static const struct iio_info ms5611_info = { @@ -234,6 +291,18 @@ static const struct iio_info ms5611_info = { static int ms5611_init(struct iio_dev *indio_dev) { int ret; + struct regulator *vdd = devm_regulator_get(indio_dev->dev.parent, + "vdd"); + + /* Enable attached regulator if any. */ + if (!IS_ERR(vdd)) { + ret = regulator_enable(vdd); + if (ret) { + dev_err(indio_dev->dev.parent, + "failed to enable Vdd supply: %d\n", ret); + return ret; + } + } ret = ms5611_reset(indio_dev); if (ret < 0) @@ -242,7 +311,8 @@ static int ms5611_init(struct iio_dev *indio_dev) return ms5611_read_prom(indio_dev); } -int ms5611_probe(struct iio_dev *indio_dev, struct device *dev, int type) +int ms5611_probe(struct iio_dev *indio_dev, struct device *dev, + const char *name, int type) { int ret; struct ms5611_state *st = iio_priv(indio_dev); @@ -250,20 +320,48 @@ int ms5611_probe(struct iio_dev *indio_dev, struct device *dev, int type) mutex_init(&st->lock); st->chip_info = &chip_info_tbl[type]; indio_dev->dev.parent = dev; - indio_dev->name = dev->driver->name; + indio_dev->name = name; indio_dev->info = &ms5611_info; indio_dev->channels = ms5611_channels; indio_dev->num_channels = ARRAY_SIZE(ms5611_channels); indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->available_scan_masks = ms5611_scan_masks; ret = ms5611_init(indio_dev); if (ret < 0) return ret; - return devm_iio_device_register(dev, indio_dev); + ret = iio_triggered_buffer_setup(indio_dev, NULL, + ms5611_trigger_handler, NULL); + if (ret < 0) { + dev_err(dev, "iio triggered buffer setup failed\n"); + return ret; + } + + ret = iio_device_register(indio_dev); + if (ret < 0) { + dev_err(dev, "unable to register iio device\n"); + goto err_buffer_cleanup; + } + + return 0; + +err_buffer_cleanup: + iio_triggered_buffer_cleanup(indio_dev); + + return ret; } EXPORT_SYMBOL(ms5611_probe); +int ms5611_remove(struct iio_dev *indio_dev) +{ + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + + return 0; +} +EXPORT_SYMBOL(ms5611_remove); + MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>"); MODULE_DESCRIPTION("MS5611 core driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/pressure/ms5611_i2c.c b/drivers/iio/pressure/ms5611_i2c.c index 245797d1ecf0..7f6fc8eee922 100644 --- a/drivers/iio/pressure/ms5611_i2c.c +++ b/drivers/iio/pressure/ms5611_i2c.c @@ -92,19 +92,25 @@ static int ms5611_i2c_probe(struct i2c_client *client, I2C_FUNC_SMBUS_WRITE_BYTE | I2C_FUNC_SMBUS_READ_WORD_DATA | I2C_FUNC_SMBUS_READ_I2C_BLOCK)) - return -ENODEV; + return -EOPNOTSUPP; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st)); if (!indio_dev) return -ENOMEM; st = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); st->reset = ms5611_i2c_reset; st->read_prom_word = ms5611_i2c_read_prom_word; st->read_adc_temp_and_pressure = ms5611_i2c_read_adc_temp_and_pressure; st->client = client; - return ms5611_probe(indio_dev, &client->dev, id->driver_data); + return ms5611_probe(indio_dev, &client->dev, id->name, id->driver_data); +} + +static int ms5611_i2c_remove(struct i2c_client *client) +{ + return ms5611_remove(i2c_get_clientdata(client)); } static const struct i2c_device_id ms5611_id[] = { @@ -120,6 +126,7 @@ static struct i2c_driver ms5611_driver = { }, .id_table = ms5611_id, .probe = ms5611_i2c_probe, + .remove = ms5611_i2c_remove, }; module_i2c_driver(ms5611_driver); diff --git a/drivers/iio/pressure/ms5611_spi.c b/drivers/iio/pressure/ms5611_spi.c index aaa0c4ba91a7..5cc009e85f0e 100644 --- a/drivers/iio/pressure/ms5611_spi.c +++ b/drivers/iio/pressure/ms5611_spi.c @@ -90,6 +90,8 @@ static int ms5611_spi_probe(struct spi_device *spi) if (!indio_dev) return -ENOMEM; + spi_set_drvdata(spi, indio_dev); + spi->mode = SPI_MODE_0; spi->max_speed_hz = 20000000; spi->bits_per_word = 8; @@ -103,8 +105,13 @@ static int ms5611_spi_probe(struct spi_device *spi) st->read_adc_temp_and_pressure = ms5611_spi_read_adc_temp_and_pressure; st->client = spi; - return ms5611_probe(indio_dev, &spi->dev, - spi_get_device_id(spi)->driver_data); + return ms5611_probe(indio_dev, &spi->dev, spi_get_device_id(spi)->name, + spi_get_device_id(spi)->driver_data); +} + +static int ms5611_spi_remove(struct spi_device *spi) +{ + return ms5611_remove(spi_get_drvdata(spi)); } static const struct spi_device_id ms5611_id[] = { @@ -120,6 +127,7 @@ static struct spi_driver ms5611_driver = { }, .id_table = ms5611_id, .probe = ms5611_spi_probe, + .remove = ms5611_spi_remove, }; module_spi_driver(ms5611_driver); diff --git a/drivers/iio/pressure/ms5637.c b/drivers/iio/pressure/ms5637.c index e8d0e0da938d..e68052c118e6 100644 --- a/drivers/iio/pressure/ms5637.c +++ b/drivers/iio/pressure/ms5637.c @@ -136,7 +136,7 @@ static int ms5637_probe(struct i2c_client *client, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { dev_err(&client->dev, "Adapter does not support some i2c transaction\n"); - return -ENODEV; + return -EOPNOTSUPP; } indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data)); diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index b39a2fb0671c..172393ad34af 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -62,6 +62,8 @@ #define ST_PRESS_LPS331AP_DRDY_IRQ_ADDR 0x22 #define ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK 0x04 #define ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK 0x20 +#define ST_PRESS_LPS331AP_IHL_IRQ_ADDR 0x22 +#define ST_PRESS_LPS331AP_IHL_IRQ_MASK 0x80 #define ST_PRESS_LPS331AP_MULTIREAD_BIT true #define ST_PRESS_LPS331AP_TEMP_OFFSET 42500 @@ -100,6 +102,8 @@ #define ST_PRESS_LPS25H_DRDY_IRQ_ADDR 0x23 #define ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK 0x01 #define ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK 0x10 +#define ST_PRESS_LPS25H_IHL_IRQ_ADDR 0x22 +#define ST_PRESS_LPS25H_IHL_IRQ_MASK 0x80 #define ST_PRESS_LPS25H_MULTIREAD_BIT true #define ST_PRESS_LPS25H_TEMP_OFFSET 42500 #define ST_PRESS_LPS25H_OUT_XL_ADDR 0x28 @@ -220,6 +224,8 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .addr = ST_PRESS_LPS331AP_DRDY_IRQ_ADDR, .mask_int1 = ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK, .mask_int2 = ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK, + .addr_ihl = ST_PRESS_LPS331AP_IHL_IRQ_ADDR, + .mask_ihl = ST_PRESS_LPS331AP_IHL_IRQ_MASK, }, .multi_read_bit = ST_PRESS_LPS331AP_MULTIREAD_BIT, .bootime = 2, @@ -304,6 +310,8 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .addr = ST_PRESS_LPS25H_DRDY_IRQ_ADDR, .mask_int1 = ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK, .mask_int2 = ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK, + .addr_ihl = ST_PRESS_LPS25H_IHL_IRQ_ADDR, + .mask_ihl = ST_PRESS_LPS25H_IHL_IRQ_MASK, }, .multi_read_bit = ST_PRESS_LPS25H_MULTIREAD_BIT, .bootime = 2, diff --git a/drivers/iio/pressure/t5403.c b/drivers/iio/pressure/t5403.c index e11cd3938d67..2667e71721f5 100644 --- a/drivers/iio/pressure/t5403.c +++ b/drivers/iio/pressure/t5403.c @@ -221,7 +221,7 @@ static int t5403_probe(struct i2c_client *client, if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_I2C_BLOCK)) - return -ENODEV; + return -EOPNOTSUPP; ret = i2c_smbus_read_byte_data(client, T5403_SLAVE_ADDR); if (ret < 0) diff --git a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c index 93e29fb67fa0..4f502386aa86 100644 --- a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c +++ b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c @@ -87,7 +87,7 @@ static int lidar_i2c_xfer(struct lidar_data *data, u8 reg, u8 *val, int len) ret = i2c_transfer(client->adapter, msg, 2); - return (ret == 2) ? 0 : ret; + return (ret == 2) ? 0 : -EIO; } static int lidar_smbus_xfer(struct lidar_data *data, u8 reg, u8 *val, int len) @@ -278,7 +278,7 @@ static int lidar_probe(struct i2c_client *client, I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE)) data->xfer = lidar_smbus_xfer; else - return -ENOTSUPP; + return -EOPNOTSUPP; indio_dev->info = &lidar_info; indio_dev->name = LIDAR_DRV_NAME; diff --git a/drivers/iio/temperature/mlx90614.c b/drivers/iio/temperature/mlx90614.c index a570c2e2aac3..4b645fc672aa 100644 --- a/drivers/iio/temperature/mlx90614.c +++ b/drivers/iio/temperature/mlx90614.c @@ -516,7 +516,7 @@ static int mlx90614_probe(struct i2c_client *client, int ret; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) - return -ENODEV; + return -EOPNOTSUPP; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!indio_dev) diff --git a/drivers/iio/temperature/tmp006.c b/drivers/iio/temperature/tmp006.c index e78c1069a6a9..18c9b43c02cb 100644 --- a/drivers/iio/temperature/tmp006.c +++ b/drivers/iio/temperature/tmp006.c @@ -205,7 +205,7 @@ static int tmp006_probe(struct i2c_client *client, int ret; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) - return -ENODEV; + return -EOPNOTSUPP; if (!tmp006_check_identification(client)) { dev_err(&client->dev, "no TMP006 sensor\n"); diff --git a/drivers/iio/temperature/tsys01.c b/drivers/iio/temperature/tsys01.c index 05c12060ce8d..3e60c6189d98 100644 --- a/drivers/iio/temperature/tsys01.c +++ b/drivers/iio/temperature/tsys01.c @@ -190,7 +190,7 @@ static int tsys01_i2c_probe(struct i2c_client *client, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { dev_err(&client->dev, "Adapter does not support some i2c transaction\n"); - return -ENODEV; + return -EOPNOTSUPP; } indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data)); diff --git a/drivers/iio/temperature/tsys02d.c b/drivers/iio/temperature/tsys02d.c index 4c1fbd52ea08..ab6fe8f6f2d1 100644 --- a/drivers/iio/temperature/tsys02d.c +++ b/drivers/iio/temperature/tsys02d.c @@ -137,7 +137,7 @@ static int tsys02d_probe(struct i2c_client *client, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { dev_err(&client->dev, "Adapter does not support some i2c transaction\n"); - return -ENODEV; + return -EOPNOTSUPP; } indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data)); |