diff options
Diffstat (limited to 'drivers/iio')
| -rw-r--r-- | drivers/iio/accel/Kconfig | 5 | ||||
| -rw-r--r-- | drivers/iio/accel/Makefile | 4 | ||||
| -rw-r--r-- | drivers/iio/accel/mma9551.c | 443 | ||||
| -rw-r--r-- | drivers/iio/accel/mma9551_core.c | 615 | ||||
| -rw-r--r-- | drivers/iio/accel/mma9551_core.h | 66 |
5 files changed, 693 insertions, 440 deletions
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index 9f67c10291bd..c53047d28ad3 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -111,9 +111,14 @@ config KXCJK1013 To compile this driver as a module, choose M here: the module will be called kxcjk-1013. +config MMA9551_CORE + tristate + config MMA9551 tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver" depends on I2C + select MMA9551_CORE + help Say yes here to build support for the Freescale MMA9551L Intelligent Motion-Sensing Platform Driver. diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index de5b9cb9670f..810531610414 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -9,7 +9,9 @@ obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o obj-$(CONFIG_KXSD9) += kxsd9.o obj-$(CONFIG_MMA8452) += mma8452.o -obj-$(CONFIG_MMA9551) += mma9551.o + +obj-$(CONFIG_MMA9551_CORE) += mma9551_core.o +obj-$(CONFIG_MMA9551) += mma9551.o obj-$(CONFIG_IIO_ST_ACCEL_3AXIS) += st_accel.o st_accel-y := st_accel_core.o diff --git a/drivers/iio/accel/mma9551.c b/drivers/iio/accel/mma9551.c index f1a5a06a0726..46c38351c6a3 100644 --- a/drivers/iio/accel/mma9551.c +++ b/drivers/iio/accel/mma9551.c @@ -23,63 +23,13 @@ #include <linux/iio/sysfs.h> #include <linux/iio/events.h> #include <linux/pm_runtime.h> +#include "mma9551_core.h" #define MMA9551_DRV_NAME "mma9551" #define MMA9551_IRQ_NAME "mma9551_event" #define MMA9551_GPIO_NAME "mma9551_int" #define MMA9551_GPIO_COUNT 4 -/* Applications IDs */ -#define MMA9551_APPID_VERSION 0x00 -#define MMA9551_APPID_GPIO 0x03 -#define MMA9551_APPID_AFE 0x06 -#define MMA9551_APPID_TILT 0x0B -#define MMA9551_APPID_SLEEP_WAKE 0x12 -#define MMA9551_APPID_RESET 0x17 -#define MMA9551_APPID_NONE 0xff - -/* Command masks for mailbox write command */ -#define MMA9551_CMD_READ_VERSION_INFO 0x00 -#define MMA9551_CMD_READ_CONFIG 0x10 -#define MMA9551_CMD_WRITE_CONFIG 0x20 -#define MMA9551_CMD_READ_STATUS 0x30 - -enum mma9551_gpio_pin { - mma9551_gpio6 = 0, - mma9551_gpio7, - mma9551_gpio8, - mma9551_gpio9, - mma9551_gpio_max = mma9551_gpio9, -}; - -/* Mailbox read command */ -#define MMA9551_RESPONSE_COCO BIT(7) - -/* Error-Status codes returned in mailbox read command */ -#define MMA9551_MCI_ERROR_NONE 0x00 -#define MMA9551_MCI_ERROR_PARAM 0x04 -#define MMA9551_MCI_INVALID_COUNT 0x19 -#define MMA9551_MCI_ERROR_COMMAND 0x1C -#define MMA9551_MCI_ERROR_INVALID_LENGTH 0x21 -#define MMA9551_MCI_ERROR_FIFO_BUSY 0x22 -#define MMA9551_MCI_ERROR_FIFO_ALLOCATED 0x23 -#define MMA9551_MCI_ERROR_FIFO_OVERSIZE 0x24 - -/* GPIO Application */ -#define MMA9551_GPIO_POL_MSB 0x08 -#define MMA9551_GPIO_POL_LSB 0x09 - -/* Sleep/Wake application */ -#define MMA9551_SLEEP_CFG 0x06 -#define MMA9551_SLEEP_CFG_SNCEN BIT(0) -#define MMA9551_SLEEP_CFG_FLEEN BIT(1) -#define MMA9551_SLEEP_CFG_SCHEN BIT(2) - -/* AFE application */ -#define MMA9551_AFE_X_ACCEL_REG 0x00 -#define MMA9551_AFE_Y_ACCEL_REG 0x02 -#define MMA9551_AFE_Z_ACCEL_REG 0x04 - /* Tilt application (inclination in IIO terms). */ #define MMA9551_TILT_XZ_ANG_REG 0x00 #define MMA9551_TILT_YZ_ANG_REG 0x01 @@ -92,6 +42,8 @@ enum mma9551_gpio_pin { #define MMA9551_TILT_CFG_REG 0x01 #define MMA9551_TILT_ANG_THRESH_MASK GENMASK(3, 0) +#define MMA9551_DEFAULT_SAMPLE_RATE 122 /* Hz */ + /* Tilt events are mapped to the first three GPIO pins. */ enum mma9551_tilt_axis { mma9551_x = 0, @@ -99,64 +51,6 @@ enum mma9551_tilt_axis { mma9551_z, }; -/* - * A response is composed of: - * - control registers: MB0-3 - * - data registers: MB4-31 - * - * A request is composed of: - * - mbox to write to (always 0) - * - control registers: MB1-4 - * - data registers: MB5-31 - */ -#define MMA9551_MAILBOX_CTRL_REGS 4 -#define MMA9551_MAX_MAILBOX_DATA_REGS 28 -#define MMA9551_MAILBOX_REGS 32 - -#define MMA9551_I2C_READ_RETRIES 5 -#define MMA9551_I2C_READ_DELAY 50 /* us */ - -#define MMA9551_DEFAULT_SAMPLE_RATE 122 /* Hz */ -#define MMA9551_AUTO_SUSPEND_DELAY_MS 2000 - -struct mma9551_mbox_request { - u8 start_mbox; /* Always 0. */ - u8 app_id; - /* - * See Section 5.3.1 of the MMA955xL Software Reference Manual. - * - * Bit 7: reserved, always 0 - * Bits 6-4: command - * Bits 3-0: upper bits of register offset - */ - u8 cmd_off; - u8 lower_off; - u8 nbytes; - u8 buf[MMA9551_MAX_MAILBOX_DATA_REGS - 1]; -} __packed; - -struct mma9551_mbox_response { - u8 app_id; - /* - * See Section 5.3.3 of the MMA955xL Software Reference Manual. - * - * Bit 7: COCO - * Bits 6-0: Error code. - */ - u8 coco_err; - u8 nbytes; - u8 req_bytes; - u8 buf[MMA9551_MAX_MAILBOX_DATA_REGS]; -} __packed; - -struct mma9551_version_info { - __be32 device_id; - u8 rom_version[2]; - u8 fw_version[2]; - u8 hw_version[2]; - u8 fw_build[2]; -}; - struct mma9551_data { struct i2c_client *client; struct mutex mutex; @@ -164,285 +58,6 @@ struct mma9551_data { int irqs[MMA9551_GPIO_COUNT]; }; -static int mma9551_transfer(struct i2c_client *client, - u8 app_id, u8 command, u16 offset, - u8 *inbytes, int num_inbytes, - u8 *outbytes, int num_outbytes) -{ - struct mma9551_mbox_request req; - struct mma9551_mbox_response rsp; - struct i2c_msg in, out; - u8 req_len, err_code; - int ret, retries; - - if (offset >= 1 << 12) { - dev_err(&client->dev, "register offset too large\n"); - return -EINVAL; - } - - req_len = 1 + MMA9551_MAILBOX_CTRL_REGS + num_inbytes; - req.start_mbox = 0; - req.app_id = app_id; - req.cmd_off = command | (offset >> 8); - req.lower_off = offset; - - if (command == MMA9551_CMD_WRITE_CONFIG) - req.nbytes = num_inbytes; - else - req.nbytes = num_outbytes; - if (num_inbytes) - memcpy(req.buf, inbytes, num_inbytes); - - out.addr = client->addr; - out.flags = 0; - out.len = req_len; - out.buf = (u8 *)&req; - - ret = i2c_transfer(client->adapter, &out, 1); - if (ret < 0) { - dev_err(&client->dev, "i2c write failed\n"); - return ret; - } - - retries = MMA9551_I2C_READ_RETRIES; - do { - udelay(MMA9551_I2C_READ_DELAY); - - in.addr = client->addr; - in.flags = I2C_M_RD; - in.len = sizeof(rsp); - in.buf = (u8 *)&rsp; - - ret = i2c_transfer(client->adapter, &in, 1); - if (ret < 0) { - dev_err(&client->dev, "i2c read failed\n"); - return ret; - } - - if (rsp.coco_err & MMA9551_RESPONSE_COCO) - break; - } while (--retries > 0); - - if (retries == 0) { - dev_err(&client->dev, - "timed out while waiting for command response\n"); - return -ETIMEDOUT; - } - - if (rsp.app_id != app_id) { - dev_err(&client->dev, - "app_id mismatch in response got %02x expected %02x\n", - rsp.app_id, app_id); - return -EINVAL; - } - - err_code = rsp.coco_err & ~MMA9551_RESPONSE_COCO; - if (err_code != MMA9551_MCI_ERROR_NONE) { - dev_err(&client->dev, "read returned error %x\n", err_code); - return -EINVAL; - } - - if (rsp.nbytes != rsp.req_bytes) { - dev_err(&client->dev, - "output length mismatch got %d expected %d\n", - rsp.nbytes, rsp.req_bytes); - return -EINVAL; - } - - if (num_outbytes) - memcpy(outbytes, rsp.buf, num_outbytes); - - return 0; -} - -static int mma9551_read_config_byte(struct i2c_client *client, u8 app_id, - u16 reg, u8 *val) -{ - return mma9551_transfer(client, app_id, MMA9551_CMD_READ_CONFIG, - reg, NULL, 0, val, 1); -} - -static int mma9551_write_config_byte(struct i2c_client *client, u8 app_id, - u16 reg, u8 val) -{ - return mma9551_transfer(client, app_id, MMA9551_CMD_WRITE_CONFIG, reg, - &val, 1, NULL, 0); -} - -static int mma9551_read_status_byte(struct i2c_client *client, u8 app_id, - u16 reg, u8 *val) -{ - return mma9551_transfer(client, app_id, MMA9551_CMD_READ_STATUS, - reg, NULL, 0, val, 1); -} - -static int mma9551_read_status_word(struct i2c_client *client, u8 app_id, - u16 reg, u16 *val) -{ - int ret; - __be16 v; - - ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_STATUS, - reg, NULL, 0, (u8 *)&v, 2); - *val = be16_to_cpu(v); - - return ret; -} - -static int mma9551_update_config_bits(struct i2c_client *client, u8 app_id, - u16 reg, u8 mask, u8 val) -{ - int ret; - u8 tmp, orig; - - ret = mma9551_read_config_byte(client, app_id, reg, &orig); - if (ret < 0) - return ret; - - tmp = orig & ~mask; - tmp |= val & mask; - - if (tmp == orig) - return 0; - - return mma9551_write_config_byte(client, app_id, reg, tmp); -} - -/* - * The polarity parameter is described in section 6.2.2, page 66, of the - * Software Reference Manual. Basically, polarity=0 means the interrupt - * line has the same value as the selected bit, while polarity=1 means - * the line is inverted. - */ -static int mma9551_gpio_config(struct i2c_client *client, - enum mma9551_gpio_pin pin, - u8 app_id, u8 bitnum, int polarity) -{ - u8 reg, pol_mask, pol_val; - int ret; - - if (pin > mma9551_gpio_max) { - dev_err(&client->dev, "bad GPIO pin\n"); - return -EINVAL; - } - - /* - * Pin 6 is configured by regs 0x00 and 0x01, pin 7 by 0x02 and - * 0x03, and so on. - */ - reg = pin * 2; - - ret = mma9551_write_config_byte(client, MMA9551_APPID_GPIO, - reg, app_id); - if (ret < 0) { - dev_err(&client->dev, "error setting GPIO app_id\n"); - return ret; - } - - ret = mma9551_write_config_byte(client, MMA9551_APPID_GPIO, - reg + 1, bitnum); - if (ret < 0) { - dev_err(&client->dev, "error setting GPIO bit number\n"); - return ret; - } - - switch (pin) { - case mma9551_gpio6: - reg = MMA9551_GPIO_POL_LSB; - pol_mask = 1 << 6; - break; - case mma9551_gpio7: - reg = MMA9551_GPIO_POL_LSB; - pol_mask = 1 << 7; - break; - case mma9551_gpio8: - reg = MMA9551_GPIO_POL_MSB; - pol_mask = 1 << 0; - break; - case mma9551_gpio9: - reg = MMA9551_GPIO_POL_MSB; - pol_mask = 1 << 1; - break; - } - pol_val = polarity ? pol_mask : 0; - - ret = mma9551_update_config_bits(client, MMA9551_APPID_GPIO, reg, - pol_mask, pol_val); - if (ret < 0) - dev_err(&client->dev, "error setting GPIO polarity\n"); - - return ret; -} - -static int mma9551_read_version(struct i2c_client *client) -{ - struct mma9551_version_info info; - int ret; - - ret = mma9551_transfer(client, MMA9551_APPID_VERSION, 0x00, 0x00, - NULL, 0, (u8 *)&info, sizeof(info)); - if (ret < 0) - return ret; - - dev_info(&client->dev, "Device ID 0x%x, firmware version %02x.%02x\n", - be32_to_cpu(info.device_id), info.fw_version[0], - info.fw_version[1]); - - return 0; -} - -/* - * Power on chip and enable doze mode. - * Use 'false' as the second parameter to cause the device to enter - * sleep. - */ -static int mma9551_set_device_state(struct i2c_client *client, bool enable) -{ - return mma9551_update_config_bits(client, MMA9551_APPID_SLEEP_WAKE, - MMA9551_SLEEP_CFG, - MMA9551_SLEEP_CFG_SNCEN | - MMA9551_SLEEP_CFG_FLEEN | - MMA9551_SLEEP_CFG_SCHEN, - enable ? MMA9551_SLEEP_CFG_SCHEN | - MMA9551_SLEEP_CFG_FLEEN : - MMA9551_SLEEP_CFG_SNCEN); -} - -static int mma9551_set_power_state(struct i2c_client *client, bool on) -{ -#ifdef CONFIG_PM - int ret; - - if (on) - ret = pm_runtime_get_sync(&client->dev); - else { - pm_runtime_mark_last_busy(&client->dev); - ret = pm_runtime_put_autosuspend(&client->dev); - } - - if (ret < 0) { - dev_err(&client->dev, - "failed to change power state to %d\n", on); - if (on) - pm_runtime_put_noidle(&client->dev); - - return ret; - } -#endif - - return 0; -} - -static void mma9551_sleep(int freq) -{ - int sleep_val = 1000 / freq; - - if (sleep_val < 20) - usleep_range(sleep_val * 1000, 20000); - else - msleep_interruptible(sleep_val); -} - static int mma9551_read_incli_chan(struct i2c_client *client, const struct iio_chan_spec *chan, int *val) @@ -497,46 +112,6 @@ out_poweroff: return ret; } -static int mma9551_read_accel_chan(struct i2c_client *client, - const struct iio_chan_spec *chan, - int *val, int *val2) -{ - u16 reg_addr; - s16 raw_accel; - int ret; - - switch (chan->channel2) { - case IIO_MOD_X: - reg_addr = MMA9551_AFE_X_ACCEL_REG; - break; - case IIO_MOD_Y: - reg_addr = MMA9551_AFE_Y_ACCEL_REG; - break; - case IIO_MOD_Z: - reg_addr = MMA9551_AFE_Z_ACCEL_REG; - break; - default: - return -EINVAL; - } - - ret = mma9551_set_power_state(client, true); - if (ret < 0) - return ret; - - ret = mma9551_read_status_word(client, MMA9551_APPID_AFE, - reg_addr, &raw_accel); - if (ret < 0) - goto out_poweroff; - - *val = raw_accel; - - ret = IIO_VAL_INT; - -out_poweroff: - mma9551_set_power_state(client, false); - return ret; -} - static int mma9551_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) @@ -569,9 +144,7 @@ static int mma9551_read_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_SCALE: switch (chan->type) { case IIO_ACCEL: - *val = 0; - *val2 = 2440; - return IIO_VAL_INT_PLUS_MICRO; + return mma9551_read_accel_scale(val, val2); default: return -EINVAL; } @@ -740,14 +313,6 @@ static const struct iio_event_spec mma9551_incli_event = { .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE), }; -#define MMA9551_ACCEL_CHANNEL(axis) { \ - .type = IIO_ACCEL, \ - .modified = 1, \ - .channel2 = axis, \ - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ -} - #define MMA9551_INCLI_CHANNEL(axis) { \ .type = IIO_INCLI, \ .modified = 1, \ diff --git a/drivers/iio/accel/mma9551_core.c b/drivers/iio/accel/mma9551_core.c new file mode 100644 index 000000000000..7f1a73e6aa36 --- /dev/null +++ b/drivers/iio/accel/mma9551_core.c @@ -0,0 +1,615 @@ +/* + * Common code for Freescale MMA955x Intelligent Sensor Platform drivers + * Copyright (c) 2014, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/iio/iio.h> +#include <linux/pm_runtime.h> +#include "mma9551_core.h" + +/* Command masks for mailbox write command */ +#define MMA9551_CMD_READ_VERSION_INFO 0x00 +#define MMA9551_CMD_READ_CONFIG 0x10 +#define MMA9551_CMD_WRITE_CONFIG 0x20 +#define MMA9551_CMD_READ_STATUS 0x30 + +/* Mailbox read command */ +#define MMA9551_RESPONSE_COCO BIT(7) + +/* Error-Status codes returned in mailbox read command */ +#define MMA9551_MCI_ERROR_NONE 0x00 +#define MMA9551_MCI_ERROR_PARAM 0x04 +#define MMA9551_MCI_INVALID_COUNT 0x19 +#define MMA9551_MCI_ERROR_COMMAND 0x1C +#define MMA9551_MCI_ERROR_INVALID_LENGTH 0x21 +#define MMA9551_MCI_ERROR_FIFO_BUSY 0x22 +#define MMA9551_MCI_ERROR_FIFO_ALLOCATED 0x23 +#define MMA9551_MCI_ERROR_FIFO_OVERSIZE 0x24 + +/* GPIO Application */ +#define MMA9551_GPIO_POL_MSB 0x08 +#define MMA9551_GPIO_POL_LSB 0x09 + +/* Sleep/Wake application */ +#define MMA9551_SLEEP_CFG 0x06 +#define MMA9551_SLEEP_CFG_SNCEN BIT(0) +#define MMA9551_SLEEP_CFG_FLEEN BIT(1) +#define MMA9551_SLEEP_CFG_SCHEN BIT(2) + +/* AFE application */ +#define MMA9551_AFE_X_ACCEL_REG 0x00 +#define MMA9551_AFE_Y_ACCEL_REG 0x02 +#define MMA9551_AFE_Z_ACCEL_REG 0x04 + +/* + * A response is composed of: + * - control registers: MB0-3 + * - data registers: MB4-31 + * + * A request is composed of: + * - mbox to write to (always 0) + * - control registers: MB1-4 + * - data registers: MB5-31 + */ +#define MMA9551_MAILBOX_CTRL_REGS 4 +#define MMA9551_MAX_MAILBOX_DATA_REGS 28 +#define MMA9551_MAILBOX_REGS 32 + +#define MMA9551_I2C_READ_RETRIES 5 +#define MMA9551_I2C_READ_DELAY 50 /* us */ + +struct mma9551_mbox_request { + u8 start_mbox; /* Always 0. */ + u8 app_id; + /* + * See Section 5.3.1 of the MMA955xL Software Reference Manual. + * + * Bit 7: reserved, always 0 + * Bits 6-4: command + * Bits 3-0: upper bits of register offset + */ + u8 cmd_off; + u8 lower_off; + u8 nbytes; + u8 buf[MMA9551_MAX_MAILBOX_DATA_REGS - 1]; +} __packed; + +struct mma9551_mbox_response { + u8 app_id; + /* + * See Section 5.3.3 of the MMA955xL Software Reference Manual. + * + * Bit 7: COCO + * Bits 6-0: Error code. + */ + u8 coco_err; + u8 nbytes; + u8 req_bytes; + u8 buf[MMA9551_MAX_MAILBOX_DATA_REGS]; +} __packed; + +struct mma9551_version_info { + __be32 device_id; + u8 rom_version[2]; + u8 fw_version[2]; + u8 hw_version[2]; + u8 fw_build[2]; +}; + +static int mma9551_transfer(struct i2c_client *client, + u8 app_id, u8 command, u16 offset, + u8 *inbytes, int num_inbytes, + u8 *outbytes, int num_outbytes) +{ + struct mma9551_mbox_request req; + struct mma9551_mbox_response rsp; + struct i2c_msg in, out; + u8 req_len, err_code; + int ret, retries; + + if (offset >= 1 << 12) { + dev_err(&client->dev, "register offset too large\n"); + return -EINVAL; + } + + req_len = 1 + MMA9551_MAILBOX_CTRL_REGS + num_inbytes; + req.start_mbox = 0; + req.app_id = app_id; + req.cmd_off = command | (offset >> 8); + req.lower_off = offset; + + if (command == MMA9551_CMD_WRITE_CONFIG) + req.nbytes = num_inbytes; + else + req.nbytes = num_outbytes; + if (num_inbytes) + memcpy(req.buf, inbytes, num_inbytes); + + out.addr = client->addr; + out.flags = 0; + out.len = req_len; + out.buf = (u8 *)&req; + + ret = i2c_transfer(client->adapter, &out, 1); + if (ret < 0) { + dev_err(&client->dev, "i2c write failed\n"); + return ret; + } + + retries = MMA9551_I2C_READ_RETRIES; + do { + udelay(MMA9551_I2C_READ_DELAY); + + in.addr = client->addr; + in.flags = I2C_M_RD; + in.len = sizeof(rsp); + in.buf = (u8 *)&rsp; + + ret = i2c_transfer(client->adapter, &in, 1); + if (ret < 0) { + dev_err(&client->dev, "i2c read failed\n"); + return ret; + } + + if (rsp.coco_err & MMA9551_RESPONSE_COCO) + break; + } while (--retries > 0); + + if (retries == 0) { + dev_err(&client->dev, + "timed out while waiting for command response\n"); + return -ETIMEDOUT; + } + + if (rsp.app_id != app_id) { + dev_err(&client->dev, + "app_id mismatch in response got %02x expected %02x\n", + rsp.app_id, app_id); + return -EINVAL; + } + + err_code = rsp.coco_err & ~MMA9551_RESPONSE_COCO; + if (err_code != MMA9551_MCI_ERROR_NONE) { + dev_err(&client->dev, "read returned error %x\n", err_code); + return -EINVAL; + } + + if (rsp.nbytes != rsp.req_bytes) { + dev_err(&client->dev, + "output length mismatch got %d expected %d\n", + rsp.nbytes, rsp.req_bytes); + return -EINVAL; + } + + if (num_outbytes) + memcpy(outbytes, rsp.buf, num_outbytes); + + return 0; +} + +/** + * mma9551_read_config_byte() - read 1 configuration byte + * @client: I2C client + * @app_id: Application ID + * @reg: Application register + * @val: Pointer to store value read + * + * Read one configuration byte from the device using MMA955xL command format. + * Commands to the MMA955xL platform consist of a write followed + * by one or more reads. + * + * Locking note: This function must be called with the device lock held. + * Locking is not handled inside the function. Callers should ensure they + * serialize access to the HW. + * + * Returns: 0 on success, negative value on failure. + */ +int mma9551_read_config_byte(struct i2c_client *client, u8 app_id, + u16 reg, u8 *val) +{ + return mma9551_transfer(client, app_id, MMA9551_CMD_READ_CONFIG, + reg, NULL, 0, val, 1); +} +EXPORT_SYMBOL(mma9551_read_config_byte); + +/** + * mma9551_write_config_byte() - write 1 configuration byte + * @client: I2C client + * @app_id: Application ID + * @reg: Application register + * @val: Value to write + * + * Write one configuration byte from the device using MMA955xL command format. + * Commands to the MMA955xL platform consist of a write followed by one or + * more reads. + * + * Locking note: This function must be called with the device lock held. + * Locking is not handled inside the function. Callers should ensure they + * serialize access to the HW. + * + * Returns: 0 on success, negative value on failure. + */ +int mma9551_write_config_byte(struct i2c_client *client, u8 app_id, + u16 reg, u8 val) +{ + return mma9551_transfer(client, app_id, MMA9551_CMD_WRITE_CONFIG, reg, + &val, 1, NULL, 0); +} +EXPORT_SYMBOL(mma9551_write_config_byte); + +/** + * mma9551_read_status_byte() - read 1 status byte + * @client: I2C client + * @app_id: Application ID + * @reg: Application register + * @val: Pointer to store value read + * + * Read one status byte from the device using MMA955xL command format. + * Commands to the MMA955xL platform consist of a write followed by one or + * more reads. + * + * Locking note: This function must be called with the device lock held. + * Locking is not handled inside the function. Callers should ensure they + * serialize access to the HW. + * + * Returns: 0 on success, negative value on failure. + */ +int mma9551_read_status_byte(struct i2c_client *client, u8 app_id, + u16 reg, u8 *val) +{ + return mma9551_transfer(client, app_id, MMA9551_CMD_READ_STATUS, + reg, NULL, 0, val, 1); +} +EXPORT_SYMBOL(mma9551_read_status_byte); + +/** + * mma9551_read_status_word() - read 1 status word + * @client: I2C client + * @app_id: Application ID + * @reg: Application register + * @val: Pointer to store value read + * + * Read one status word from the device using MMA955xL command format. + * Commands to the MMA955xL platform consist of a write followed by one or + * more reads. + * + * Locking note: This function must be called with the device lock held. + * Locking is not handled inside the function. Callers should ensure they + * serialize access to the HW. + * + * Returns: 0 on success, negative value on failure. + */ +int mma9551_read_status_word(struct i2c_client *client, u8 app_id, + u16 reg, u16 *val) +{ + int ret; + __be16 v; + + ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_STATUS, + reg, NULL, 0, (u8 *)&v, 2); + *val = be16_to_cpu(v); + + return ret; +} +EXPORT_SYMBOL(mma9551_read_status_word); + +/** + * mma9551_update_config_bits() - update bits in register + * @client: I2C client + * @app_id: Application ID + * @reg: Application register + * @mask: Mask for the bits to update + * @val: Value of the bits to update + * + * Update bits in the given register using a bit mask. + * + * Locking note: This function must be called with the device lock held. + * Locking is not handled inside the function. Callers should ensure they + * serialize access to the HW. + * + * Returns: 0 on success, negative value on failure. + */ +int mma9551_update_config_bits(struct i2c_client *client, u8 app_id, + u16 reg, u8 mask, u8 val) +{ + int ret; + u8 tmp, orig; + + ret = mma9551_read_config_byte(client, app_id, reg, &orig); + if (ret < 0) + return ret; + + tmp = orig & ~mask; + tmp |= val & mask; + + if (tmp == orig) + return 0; + + return mma9551_write_config_byte(client, app_id, reg, tmp); +} +EXPORT_SYMBOL(mma9551_update_config_bits); + +/** + * mma9551_gpio_config() - configure gpio + * @client: I2C client + * @pin: GPIO pin to configure + * @app_id: Application ID + * @bitnum: Bit number of status register being assigned to the GPIO pin. + * @polarity: The polarity parameter is described in section 6.2.2, page 66, + * of the Software Reference Manual. Basically, polarity=0 means + * the interrupt line has the same value as the selected bit, + * while polarity=1 means the line is inverted. + * + * Assign a bit from an application’s status register to a specific GPIO pin. + * + * Locking note: This function must be called with the device lock held. + * Locking is not handled inside the function. Callers should ensure they + * serialize access to the HW. + * + * Returns: 0 on success, negative value on failure. + */ +int mma9551_gpio_config(struct i2c_client *client, enum mma9551_gpio_pin pin, + u8 app_id, u8 bitnum, int polarity) +{ + u8 reg, pol_mask, pol_val; + int ret; + + if (pin > mma9551_gpio_max) { + dev_err(&client->dev, "bad GPIO pin\n"); + return -EINVAL; + } + + /* + * Pin 6 is configured by regs 0x00 and 0x01, pin 7 by 0x02 and + * 0x03, and so on. + */ + reg = pin * 2; + + ret = mma9551_write_config_byte(client, MMA9551_APPID_GPIO, + reg, app_id); + if (ret < 0) { + dev_err(&client->dev, "error setting GPIO app_id\n"); + return ret; + } + + ret = mma9551_write_config_byte(client, MMA9551_APPID_GPIO, + reg + 1, bitnum); + if (ret < 0) { + dev_err(&client->dev, "error setting GPIO bit number\n"); + return ret; + } + + switch (pin) { + case mma9551_gpio6: + reg = MMA9551_GPIO_POL_LSB; + pol_mask = 1 << 6; + break; + case mma9551_gpio7: + reg = MMA9551_GPIO_POL_LSB; + pol_mask = 1 << 7; + break; + case mma9551_gpio8: + reg = MMA9551_GPIO_POL_MSB; + pol_mask = 1 << 0; + break; + case mma9551_gpio9: + reg = MMA9551_GPIO_POL_MSB; + pol_mask = 1 << 1; + break; + } + pol_val = polarity ? pol_mask : 0; + + ret = mma9551_update_config_bits(client, MMA9551_APPID_GPIO, reg, + pol_mask, pol_val); + if (ret < 0) + dev_err(&client->dev, "error setting GPIO polarity\n"); + + return ret; +} +EXPORT_SYMBOL(mma9551_gpio_config); + +/** + * mma9551_read_version() - read device version information + * @client: I2C client + * + * Read version information and print device id and firmware version. + * + * Locking note: This function must be called with the device lock held. + * Locking is not handled inside the function. Callers should ensure they + * serialize access to the HW. + * + * Returns: 0 on success, negative value on failure. + */ +int mma9551_read_version(struct i2c_client *client) +{ + struct mma9551_version_info info; + int ret; + + ret = mma9551_transfer(client, MMA9551_APPID_VERSION, 0x00, 0x00, + NULL, 0, (u8 *)&info, sizeof(info)); + if (ret < 0) + return ret; + + dev_info(&client->dev, "device ID 0x%x, firmware version %02x.%02x\n", + be32_to_cpu(info.device_id), info.fw_version[0], + info.fw_version[1]); + + return 0; +} +EXPORT_SYMBOL(mma9551_read_version); + +/** + * mma9551_set_device_state() - sets HW power mode + * @client: I2C client + * @enable: Use true to power on device, false to cause the device + * to enter sleep. + * + * Set power on/off for device using the Sleep/Wake Application. + * When enable is true, power on chip and enable doze mode. + * When enable is false, enter sleep mode (device remains in the + * lowest-power mode). + * + * Locking note: This function must be called with the device lock held. + * Locking is not handled inside the function. Callers should ensure they + * serialize access to the HW. + * + * Returns: 0 on success, negative value on failure. + */ +int mma9551_set_device_state(struct i2c_client *client, bool enable) +{ + return mma9551_update_config_bits(client, MMA9551_APPID_SLEEP_WAKE, + MMA9551_SLEEP_CFG, + MMA9551_SLEEP_CFG_SNCEN | + MMA9551_SLEEP_CFG_FLEEN | + MMA9551_SLEEP_CFG_SCHEN, + enable ? MMA9551_SLEEP_CFG_SCHEN | + MMA9551_SLEEP_CFG_FLEEN : + MMA9551_SLEEP_CFG_SNCEN); +} +EXPORT_SYMBOL(mma9551_set_device_state); + +/** + * mma9551_set_power_state() - sets runtime PM state + * @client: I2C client + * @on: Use true to power on device, false to power off + * + * Resume or suspend the device using Runtime PM. + * The device will suspend after the autosuspend delay. + * + * Returns: 0 on success, negative value on failure. + */ +int mma9551_set_power_state(struct i2c_client *client, bool on) +{ +#ifdef CONFIG_PM + int ret; + + if (on) + ret = pm_runtime_get_sync(&client->dev); + else { + pm_runtime_mark_last_busy(&client->dev); + ret = pm_runtime_put_autosuspend(&client->dev); + } + + if (ret < 0) { + dev_err(&client->dev, + "failed to change power state to %d\n", on); + if (on) + pm_runtime_put_noidle(&client->dev); + + return ret; + } +#endif + + return 0; +} +EXPORT_SYMBOL(mma9551_set_power_state); + +/** + * mma9551_sleep() - sleep + * @freq: Application frequency + * + * Firmware applications run at a certain frequency on the + * device. Sleep for one application cycle to make sure the + * application had time to run once and initialize set values. + */ +void mma9551_sleep(int freq) +{ + int sleep_val = 1000 / freq; + + if (sleep_val < 20) + usleep_range(sleep_val * 1000, 20000); + else + msleep_interruptible(sleep_val); +} +EXPORT_SYMBOL(mma9551_sleep); + +/** + * mma9551_read_accel_chan() - read accelerometer channel + * @client: I2C client + * @chan: IIO channel + * @val: Pointer to the accelerometer value read + * @val2: Unused + * + * Read accelerometer value for the specified channel. + * + * Locking note: This function must be called with the device lock held. + * Locking is not handled inside the function. Callers should ensure they + * serialize access to the HW. + * + * Returns: IIO_VAL_INT on success, negative value on failure. + */ +int mma9551_read_accel_chan(struct i2c_client *client, + const struct iio_chan_spec *chan, + int *val, int *val2) +{ + u16 reg_addr; + s16 raw_accel; + int ret; + + switch (chan->channel2) { + case IIO_MOD_X: + reg_addr = MMA9551_AFE_X_ACCEL_REG; + break; + case IIO_MOD_Y: + reg_addr = MMA9551_AFE_Y_ACCEL_REG; + break; + case IIO_MOD_Z: + reg_addr = MMA9551_AFE_Z_ACCEL_REG; + break; + default: + return -EINVAL; + } + + ret = mma9551_set_power_state(client, true); + if (ret < 0) + return ret; + + ret = mma9551_read_status_word(client, MMA9551_APPID_AFE, + reg_addr, &raw_accel); + if (ret < 0) + goto out_poweroff; + + *val = raw_accel; + + ret = IIO_VAL_INT; + +out_poweroff: + mma9551_set_power_state(client, false); + return ret; +} +EXPORT_SYMBOL(mma9551_read_accel_chan); + +/** + * mma9551_read_accel_scale() - read accelerometer scale + * @val: Pointer to the accelerometer scale (int value) + * @val2: Pointer to the accelerometer scale (micro value) + * + * Read accelerometer scale. + * + * Returns: IIO_VAL_INT_PLUS_MICRO. + */ +int mma9551_read_accel_scale(int *val, int *val2) +{ + *val = 0; + *val2 = 2440; + + return IIO_VAL_INT_PLUS_MICRO; +} +EXPORT_SYMBOL(mma9551_read_accel_scale); + +MODULE_AUTHOR("Irina Tirdea <irina.tirdea@intel.com>"); +MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("MMA955xL sensors core"); diff --git a/drivers/iio/accel/mma9551_core.h b/drivers/iio/accel/mma9551_core.h new file mode 100644 index 000000000000..e6efd027f49a --- /dev/null +++ b/drivers/iio/accel/mma9551_core.h @@ -0,0 +1,66 @@ +/* + * Common code for Freescale MMA955x Intelligent Sensor Platform drivers + * Copyright (c) 2014, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef _MMA9551_CORE_H_ +#define _MMA9551_CORE_H_ + +/* Applications IDs */ +#define MMA9551_APPID_VERSION 0x00 +#define MMA9551_APPID_GPIO 0x03 +#define MMA9551_APPID_AFE 0x06 +#define MMA9551_APPID_TILT 0x0B +#define MMA9551_APPID_SLEEP_WAKE 0x12 +#define MMA9551_APPID_RESET 0x17 +#define MMA9551_APPID_NONE 0xff + +#define MMA9551_AUTO_SUSPEND_DELAY_MS 2000 + +enum mma9551_gpio_pin { + mma9551_gpio6 = 0, + mma9551_gpio7, + mma9551_gpio8, + mma9551_gpio9, + mma9551_gpio_max = mma9551_gpio9, +}; + +#define MMA9551_ACCEL_CHANNEL(axis) { \ + .type = IIO_ACCEL, \ + .modified = 1, \ + .channel2 = axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ +} + +int mma9551_read_config_byte(struct i2c_client *client, u8 app_id, + u16 reg, u8 *val); +int mma9551_write_config_byte(struct i2c_client *client, u8 app_id, + u16 reg, u8 val); +int mma9551_read_status_byte(struct i2c_client *client, u8 app_id, + u16 reg, u8 *val); +int mma9551_read_status_word(struct i2c_client *client, u8 app_id, + u16 reg, u16 *val); +int mma9551_update_config_bits(struct i2c_client *client, u8 app_id, + u16 reg, u8 mask, u8 val); +int mma9551_gpio_config(struct i2c_client *client, enum mma9551_gpio_pin pin, + u8 app_id, u8 bitnum, int polarity); +int mma9551_read_version(struct i2c_client *client); +int mma9551_set_device_state(struct i2c_client *client, bool enable); +int mma9551_set_power_state(struct i2c_client *client, bool on); +void mma9551_sleep(int freq); +int mma9551_read_accel_chan(struct i2c_client *client, + const struct iio_chan_spec *chan, + int *val, int *val2); +int mma9551_read_accel_scale(int *val, int *val2); + +#endif /* _MMA9551_CORE_H_ */ |