summaryrefslogtreecommitdiff
path: root/drivers/iio/pressure
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/pressure')
-rw-r--r--drivers/iio/pressure/Kconfig28
-rw-r--r--drivers/iio/pressure/Makefile2
-rw-r--r--drivers/iio/pressure/bmp280.c564
-rw-r--r--drivers/iio/pressure/hp03.c312
-rw-r--r--drivers/iio/pressure/hp206c.c426
-rw-r--r--drivers/iio/pressure/ms5611.h23
-rw-r--r--drivers/iio/pressure/ms5611_core.c148
-rw-r--r--drivers/iio/pressure/ms5611_i2c.c25
-rw-r--r--drivers/iio/pressure/ms5611_spi.c34
-rw-r--r--drivers/iio/pressure/st_pressure_core.c10
10 files changed, 1506 insertions, 66 deletions
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index 31c0e1fd2202..cda9f128f3a4 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -6,12 +6,13 @@
menu "Pressure sensors"
config BMP280
- tristate "Bosch Sensortec BMP280 pressure sensor driver"
+ tristate "Bosch Sensortec BMP180 and BMP280 pressure sensor driver"
depends on I2C
+ depends on !(BMP085_I2C=y || BMP085_I2C=m)
select REGMAP_I2C
help
- Say yes here to build support for Bosch Sensortec BMP280
- pressure and temperature sensor.
+ Say yes here to build support for Bosch Sensortec BMP180 and BMP280
+ pressure and temperature sensors.
To compile this driver as a module, choose M here: the module
will be called bmp280.
@@ -30,6 +31,17 @@ config HID_SENSOR_PRESS
To compile this driver as a module, choose M here: the module
will be called hid-sensor-press.
+config HP03
+ tristate "Hope RF HP03 temperature and pressure sensor driver"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Say yes here to build support for Hope RF HP03 pressure and
+ temperature sensor.
+
+ To compile this driver as a module, choose M here: the module
+ will be called hp03.
+
config MPL115
tristate
@@ -148,4 +160,14 @@ config T5403
To compile this driver as a module, choose M here: the module
will be called t5403.
+config HP206C
+ tristate "HOPERF HP206C precision barometer and altimeter sensor"
+ depends on I2C
+ help
+ Say yes here to build support for the HOPREF HP206C precision
+ barometer and altimeter sensor.
+
+ This driver can also be built as a module. If so, the module will
+ be called hp206c.
+
endmenu
diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile
index d336af14f3fe..17d6e7afa1ff 100644
--- a/drivers/iio/pressure/Makefile
+++ b/drivers/iio/pressure/Makefile
@@ -5,6 +5,7 @@
# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_BMP280) += bmp280.o
obj-$(CONFIG_HID_SENSOR_PRESS) += hid-sensor-press.o
+obj-$(CONFIG_HP03) += hp03.o
obj-$(CONFIG_MPL115) += mpl115.o
obj-$(CONFIG_MPL115_I2C) += mpl115_i2c.o
obj-$(CONFIG_MPL115_SPI) += mpl115_spi.o
@@ -17,6 +18,7 @@ obj-$(CONFIG_IIO_ST_PRESS) += st_pressure.o
st_pressure-y := st_pressure_core.o
st_pressure-$(CONFIG_IIO_BUFFER) += st_pressure_buffer.o
obj-$(CONFIG_T5403) += t5403.o
+obj-$(CONFIG_HP206C) += hp206c.o
obj-$(CONFIG_IIO_ST_PRESS_I2C) += st_pressure_i2c.o
obj-$(CONFIG_IIO_ST_PRESS_SPI) += st_pressure_spi.o
diff --git a/drivers/iio/pressure/bmp280.c b/drivers/iio/pressure/bmp280.c
index a2602d8dd6d5..2f1498e12bb2 100644
--- a/drivers/iio/pressure/bmp280.c
+++ b/drivers/iio/pressure/bmp280.c
@@ -1,12 +1,15 @@
/*
* Copyright (c) 2014 Intel Corporation
*
- * Driver for Bosch Sensortec BMP280 digital pressure sensor.
+ * Driver for Bosch Sensortec BMP180 and BMP280 digital pressure sensor.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
+ * Datasheet:
+ * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP180-DS000-121.pdf
+ * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP280-DS001-12.pdf
*/
#define pr_fmt(fmt) "bmp280: " fmt
@@ -15,9 +18,11 @@
#include <linux/i2c.h>
#include <linux/acpi.h>
#include <linux/regmap.h>
+#include <linux/delay.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
+/* BMP280 specific registers */
#define BMP280_REG_TEMP_XLSB 0xFC
#define BMP280_REG_TEMP_LSB 0xFB
#define BMP280_REG_TEMP_MSB 0xFA
@@ -26,10 +31,7 @@
#define BMP280_REG_PRESS_MSB 0xF7
#define BMP280_REG_CONFIG 0xF5
-#define BMP280_REG_CTRL_MEAS 0xF4
#define BMP280_REG_STATUS 0xF3
-#define BMP280_REG_RESET 0xE0
-#define BMP280_REG_ID 0xD0
#define BMP280_REG_COMP_TEMP_START 0x88
#define BMP280_COMP_TEMP_REG_COUNT 6
@@ -46,25 +48,49 @@
#define BMP280_OSRS_TEMP_MASK (BIT(7) | BIT(6) | BIT(5))
#define BMP280_OSRS_TEMP_SKIP 0
-#define BMP280_OSRS_TEMP_1X BIT(5)
-#define BMP280_OSRS_TEMP_2X BIT(6)
-#define BMP280_OSRS_TEMP_4X (BIT(6) | BIT(5))
-#define BMP280_OSRS_TEMP_8X BIT(7)
-#define BMP280_OSRS_TEMP_16X (BIT(7) | BIT(5))
+#define BMP280_OSRS_TEMP_X(osrs_t) ((osrs_t) << 5)
+#define BMP280_OSRS_TEMP_1X BMP280_OSRS_TEMP_X(1)
+#define BMP280_OSRS_TEMP_2X BMP280_OSRS_TEMP_X(2)
+#define BMP280_OSRS_TEMP_4X BMP280_OSRS_TEMP_X(3)
+#define BMP280_OSRS_TEMP_8X BMP280_OSRS_TEMP_X(4)
+#define BMP280_OSRS_TEMP_16X BMP280_OSRS_TEMP_X(5)
#define BMP280_OSRS_PRESS_MASK (BIT(4) | BIT(3) | BIT(2))
#define BMP280_OSRS_PRESS_SKIP 0
-#define BMP280_OSRS_PRESS_1X BIT(2)
-#define BMP280_OSRS_PRESS_2X BIT(3)
-#define BMP280_OSRS_PRESS_4X (BIT(3) | BIT(2))
-#define BMP280_OSRS_PRESS_8X BIT(4)
-#define BMP280_OSRS_PRESS_16X (BIT(4) | BIT(2))
+#define BMP280_OSRS_PRESS_X(osrs_p) ((osrs_p) << 2)
+#define BMP280_OSRS_PRESS_1X BMP280_OSRS_PRESS_X(1)
+#define BMP280_OSRS_PRESS_2X BMP280_OSRS_PRESS_X(2)
+#define BMP280_OSRS_PRESS_4X BMP280_OSRS_PRESS_X(3)
+#define BMP280_OSRS_PRESS_8X BMP280_OSRS_PRESS_X(4)
+#define BMP280_OSRS_PRESS_16X BMP280_OSRS_PRESS_X(5)
#define BMP280_MODE_MASK (BIT(1) | BIT(0))
#define BMP280_MODE_SLEEP 0
#define BMP280_MODE_FORCED BIT(0)
#define BMP280_MODE_NORMAL (BIT(1) | BIT(0))
+/* BMP180 specific registers */
+#define BMP180_REG_OUT_XLSB 0xF8
+#define BMP180_REG_OUT_LSB 0xF7
+#define BMP180_REG_OUT_MSB 0xF6
+
+#define BMP180_REG_CALIB_START 0xAA
+#define BMP180_REG_CALIB_COUNT 22
+
+#define BMP180_MEAS_SCO BIT(5)
+#define BMP180_MEAS_TEMP (0x0E | BMP180_MEAS_SCO)
+#define BMP180_MEAS_PRESS_X(oss) ((oss) << 6 | 0x14 | BMP180_MEAS_SCO)
+#define BMP180_MEAS_PRESS_1X BMP180_MEAS_PRESS_X(0)
+#define BMP180_MEAS_PRESS_2X BMP180_MEAS_PRESS_X(1)
+#define BMP180_MEAS_PRESS_4X BMP180_MEAS_PRESS_X(2)
+#define BMP180_MEAS_PRESS_8X BMP180_MEAS_PRESS_X(3)
+
+/* BMP180 and BMP280 common registers */
+#define BMP280_REG_CTRL_MEAS 0xF4
+#define BMP280_REG_RESET 0xE0
+#define BMP280_REG_ID 0xD0
+
+#define BMP180_CHIP_ID 0x55
#define BMP280_CHIP_ID 0x58
#define BMP280_SOFT_RESET_VAL 0xB6
@@ -72,6 +98,11 @@ struct bmp280_data {
struct i2c_client *client;
struct mutex lock;
struct regmap *regmap;
+ const struct bmp280_chip_info *chip_info;
+
+ /* log of base 2 of oversampling rate */
+ u8 oversampling_press;
+ u8 oversampling_temp;
/*
* Carryover value from temperature conversion, used in pressure
@@ -80,9 +111,23 @@ struct bmp280_data {
s32 t_fine;
};
+struct bmp280_chip_info {
+ const struct regmap_config *regmap_config;
+
+ const int *oversampling_temp_avail;
+ int num_oversampling_temp_avail;
+
+ const int *oversampling_press_avail;
+ int num_oversampling_press_avail;
+
+ int (*chip_config)(struct bmp280_data *);
+ int (*read_temp)(struct bmp280_data *, int *);
+ int (*read_press)(struct bmp280_data *, int *, int *);
+};
+
/*
* These enums are used for indexing into the array of compensation
- * parameters.
+ * parameters for BMP280.
*/
enum { T1, T2, T3 };
enum { P1, P2, P3, P4, P5, P6, P7, P8, P9 };
@@ -90,11 +135,13 @@ enum { P1, P2, P3, P4, P5, P6, P7, P8, P9 };
static const struct iio_chan_spec bmp280_channels[] = {
{
.type = IIO_PRESSURE,
- .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
},
{
.type = IIO_TEMP,
- .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
},
};
@@ -290,10 +337,25 @@ static int bmp280_read_raw(struct iio_dev *indio_dev,
case IIO_CHAN_INFO_PROCESSED:
switch (chan->type) {
case IIO_PRESSURE:
- ret = bmp280_read_press(data, val, val2);
+ ret = data->chip_info->read_press(data, val, val2);
break;
case IIO_TEMP:
- ret = bmp280_read_temp(data, val);
+ ret = data->chip_info->read_temp(data, val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ break;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ switch (chan->type) {
+ case IIO_PRESSURE:
+ *val = 1 << data->oversampling_press;
+ ret = IIO_VAL_INT;
+ break;
+ case IIO_TEMP:
+ *val = 1 << data->oversampling_temp;
+ ret = IIO_VAL_INT;
break;
default:
ret = -EINVAL;
@@ -310,22 +372,135 @@ static int bmp280_read_raw(struct iio_dev *indio_dev,
return ret;
}
+static int bmp280_write_oversampling_ratio_temp(struct bmp280_data *data,
+ int val)
+{
+ int i;
+ const int *avail = data->chip_info->oversampling_temp_avail;
+ const int n = data->chip_info->num_oversampling_temp_avail;
+
+ for (i = 0; i < n; i++) {
+ if (avail[i] == val) {
+ data->oversampling_temp = ilog2(val);
+
+ return data->chip_info->chip_config(data);
+ }
+ }
+ return -EINVAL;
+}
+
+static int bmp280_write_oversampling_ratio_press(struct bmp280_data *data,
+ int val)
+{
+ int i;
+ const int *avail = data->chip_info->oversampling_press_avail;
+ const int n = data->chip_info->num_oversampling_press_avail;
+
+ for (i = 0; i < n; i++) {
+ if (avail[i] == val) {
+ data->oversampling_press = ilog2(val);
+
+ return data->chip_info->chip_config(data);
+ }
+ }
+ return -EINVAL;
+}
+
+static int bmp280_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ int ret = 0;
+ struct bmp280_data *data = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ mutex_lock(&data->lock);
+ switch (chan->type) {
+ case IIO_PRESSURE:
+ ret = bmp280_write_oversampling_ratio_press(data, val);
+ break;
+ case IIO_TEMP:
+ ret = bmp280_write_oversampling_ratio_temp(data, val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ mutex_unlock(&data->lock);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static ssize_t bmp280_show_avail(char *buf, const int *vals, const int n)
+{
+ size_t len = 0;
+ int i;
+
+ for (i = 0; i < n; i++)
+ len += scnprintf(buf + len, PAGE_SIZE - len, "%d ", vals[i]);
+
+ buf[len - 1] = '\n';
+
+ return len;
+}
+
+static ssize_t bmp280_show_temp_oversampling_avail(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct bmp280_data *data = iio_priv(dev_to_iio_dev(dev));
+
+ return bmp280_show_avail(buf, data->chip_info->oversampling_temp_avail,
+ data->chip_info->num_oversampling_temp_avail);
+}
+
+static ssize_t bmp280_show_press_oversampling_avail(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct bmp280_data *data = iio_priv(dev_to_iio_dev(dev));
+
+ return bmp280_show_avail(buf, data->chip_info->oversampling_press_avail,
+ data->chip_info->num_oversampling_press_avail);
+}
+
+static IIO_DEVICE_ATTR(in_temp_oversampling_ratio_available,
+ S_IRUGO, bmp280_show_temp_oversampling_avail, NULL, 0);
+
+static IIO_DEVICE_ATTR(in_pressure_oversampling_ratio_available,
+ S_IRUGO, bmp280_show_press_oversampling_avail, NULL, 0);
+
+static struct attribute *bmp280_attributes[] = {
+ &iio_dev_attr_in_temp_oversampling_ratio_available.dev_attr.attr,
+ &iio_dev_attr_in_pressure_oversampling_ratio_available.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group bmp280_attrs_group = {
+ .attrs = bmp280_attributes,
+};
+
static const struct iio_info bmp280_info = {
.driver_module = THIS_MODULE,
.read_raw = &bmp280_read_raw,
+ .write_raw = &bmp280_write_raw,
+ .attrs = &bmp280_attrs_group,
};
-static int bmp280_chip_init(struct bmp280_data *data)
+static int bmp280_chip_config(struct bmp280_data *data)
{
int ret;
+ u8 osrs = BMP280_OSRS_TEMP_X(data->oversampling_temp + 1) |
+ BMP280_OSRS_PRESS_X(data->oversampling_press + 1);
ret = regmap_update_bits(data->regmap, BMP280_REG_CTRL_MEAS,
BMP280_OSRS_TEMP_MASK |
BMP280_OSRS_PRESS_MASK |
BMP280_MODE_MASK,
- BMP280_OSRS_TEMP_2X |
- BMP280_OSRS_PRESS_16X |
- BMP280_MODE_NORMAL);
+ osrs | BMP280_MODE_NORMAL);
if (ret < 0) {
dev_err(&data->client->dev,
"failed to write ctrl_meas register\n");
@@ -344,6 +519,317 @@ static int bmp280_chip_init(struct bmp280_data *data)
return ret;
}
+static const int bmp280_oversampling_avail[] = { 1, 2, 4, 8, 16 };
+
+static const struct bmp280_chip_info bmp280_chip_info = {
+ .regmap_config = &bmp280_regmap_config,
+
+ .oversampling_temp_avail = bmp280_oversampling_avail,
+ .num_oversampling_temp_avail = ARRAY_SIZE(bmp280_oversampling_avail),
+
+ .oversampling_press_avail = bmp280_oversampling_avail,
+ .num_oversampling_press_avail = ARRAY_SIZE(bmp280_oversampling_avail),
+
+ .chip_config = bmp280_chip_config,
+ .read_temp = bmp280_read_temp,
+ .read_press = bmp280_read_press,
+};
+
+static bool bmp180_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case BMP280_REG_CTRL_MEAS:
+ case BMP280_REG_RESET:
+ return true;
+ default:
+ return false;
+ };
+}
+
+static bool bmp180_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case BMP180_REG_OUT_XLSB:
+ case BMP180_REG_OUT_LSB:
+ case BMP180_REG_OUT_MSB:
+ case BMP280_REG_CTRL_MEAS:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config bmp180_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = BMP180_REG_OUT_XLSB,
+ .cache_type = REGCACHE_RBTREE,
+
+ .writeable_reg = bmp180_is_writeable_reg,
+ .volatile_reg = bmp180_is_volatile_reg,
+};
+
+static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas)
+{
+ int ret;
+ const int conversion_time_max[] = { 4500, 7500, 13500, 25500 };
+ unsigned int delay_us;
+ unsigned int ctrl;
+
+ ret = regmap_write(data->regmap, BMP280_REG_CTRL_MEAS, ctrl_meas);
+ if (ret)
+ return ret;
+
+ if (ctrl_meas == BMP180_MEAS_TEMP)
+ delay_us = 4500;
+ else
+ delay_us = conversion_time_max[data->oversampling_press];
+
+ usleep_range(delay_us, delay_us + 1000);
+
+ ret = regmap_read(data->regmap, BMP280_REG_CTRL_MEAS, &ctrl);
+ if (ret)
+ return ret;
+
+ /* The value of this bit reset to "0" after conversion is complete */
+ if (ctrl & BMP180_MEAS_SCO)
+ return -EIO;
+
+ return 0;
+}
+
+static int bmp180_read_adc_temp(struct bmp280_data *data, int *val)
+{
+ int ret;
+ __be16 tmp = 0;
+
+ ret = bmp180_measure(data, BMP180_MEAS_TEMP);
+ if (ret)
+ return ret;
+
+ ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, (u8 *)&tmp, 2);
+ if (ret)
+ return ret;
+
+ *val = be16_to_cpu(tmp);
+
+ return 0;
+}
+
+/*
+ * These enums are used for indexing into the array of calibration
+ * coefficients for BMP180.
+ */
+enum { AC1, AC2, AC3, AC4, AC5, AC6, B1, B2, MB, MC, MD };
+
+struct bmp180_calib {
+ s16 AC1;
+ s16 AC2;
+ s16 AC3;
+ u16 AC4;
+ u16 AC5;
+ u16 AC6;
+ s16 B1;
+ s16 B2;
+ s16 MB;
+ s16 MC;
+ s16 MD;
+};
+
+static int bmp180_read_calib(struct bmp280_data *data,
+ struct bmp180_calib *calib)
+{
+ int ret;
+ int i;
+ __be16 buf[BMP180_REG_CALIB_COUNT / 2];
+
+ ret = regmap_bulk_read(data->regmap, BMP180_REG_CALIB_START, buf,
+ sizeof(buf));
+
+ if (ret < 0)
+ return ret;
+
+ /* None of the words has the value 0 or 0xFFFF */
+ for (i = 0; i < ARRAY_SIZE(buf); i++) {
+ if (buf[i] == cpu_to_be16(0) || buf[i] == cpu_to_be16(0xffff))
+ return -EIO;
+ }
+
+ calib->AC1 = be16_to_cpu(buf[AC1]);
+ calib->AC2 = be16_to_cpu(buf[AC2]);
+ calib->AC3 = be16_to_cpu(buf[AC3]);
+ calib->AC4 = be16_to_cpu(buf[AC4]);
+ calib->AC5 = be16_to_cpu(buf[AC5]);
+ calib->AC6 = be16_to_cpu(buf[AC6]);
+ calib->B1 = be16_to_cpu(buf[B1]);
+ calib->B2 = be16_to_cpu(buf[B2]);
+ calib->MB = be16_to_cpu(buf[MB]);
+ calib->MC = be16_to_cpu(buf[MC]);
+ calib->MD = be16_to_cpu(buf[MD]);
+
+ return 0;
+}
+
+/*
+ * Returns temperature in DegC, resolution is 0.1 DegC.
+ * t_fine carries fine temperature as global value.
+ *
+ * Taken from datasheet, Section 3.5, "Calculating pressure and temperature".
+ */
+static s32 bmp180_compensate_temp(struct bmp280_data *data, s32 adc_temp)
+{
+ int ret;
+ s32 x1, x2;
+ struct bmp180_calib calib;
+
+ ret = bmp180_read_calib(data, &calib);
+ if (ret < 0) {
+ dev_err(&data->client->dev,
+ "failed to read calibration coefficients\n");
+ return ret;
+ }
+
+ x1 = ((adc_temp - calib.AC6) * calib.AC5) >> 15;
+ x2 = (calib.MC << 11) / (x1 + calib.MD);
+ data->t_fine = x1 + x2;
+
+ return (data->t_fine + 8) >> 4;
+}
+
+static int bmp180_read_temp(struct bmp280_data *data, int *val)
+{
+ int ret;
+ s32 adc_temp, comp_temp;
+
+ ret = bmp180_read_adc_temp(data, &adc_temp);
+ if (ret)
+ return ret;
+
+ comp_temp = bmp180_compensate_temp(data, adc_temp);
+
+ /*
+ * val might be NULL if we're called by the read_press routine,
+ * who only cares about the carry over t_fine value.
+ */
+ if (val) {
+ *val = comp_temp * 100;
+ return IIO_VAL_INT;
+ }
+
+ return 0;
+}
+
+static int bmp180_read_adc_press(struct bmp280_data *data, int *val)
+{
+ int ret;
+ __be32 tmp = 0;
+ u8 oss = data->oversampling_press;
+
+ ret = bmp180_measure(data, BMP180_MEAS_PRESS_X(oss));
+ if (ret)
+ return ret;
+
+ ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, (u8 *)&tmp, 3);
+ if (ret)
+ return ret;
+
+ *val = (be32_to_cpu(tmp) >> 8) >> (8 - oss);
+
+ return 0;
+}
+
+/*
+ * Returns pressure in Pa, resolution is 1 Pa.
+ *
+ * Taken from datasheet, Section 3.5, "Calculating pressure and temperature".
+ */
+static u32 bmp180_compensate_press(struct bmp280_data *data, s32 adc_press)
+{
+ int ret;
+ s32 x1, x2, x3, p;
+ s32 b3, b6;
+ u32 b4, b7;
+ s32 oss = data->oversampling_press;
+ struct bmp180_calib calib;
+
+ ret = bmp180_read_calib(data, &calib);
+ if (ret < 0) {
+ dev_err(&data->client->dev,
+ "failed to read calibration coefficients\n");
+ return ret;
+ }
+
+ b6 = data->t_fine - 4000;
+ x1 = (calib.B2 * (b6 * b6 >> 12)) >> 11;
+ x2 = calib.AC2 * b6 >> 11;
+ x3 = x1 + x2;
+ b3 = ((((s32)calib.AC1 * 4 + x3) << oss) + 2) / 4;
+ x1 = calib.AC3 * b6 >> 13;
+ x2 = (calib.B1 * ((b6 * b6) >> 12)) >> 16;
+ x3 = (x1 + x2 + 2) >> 2;
+ b4 = calib.AC4 * (u32)(x3 + 32768) >> 15;
+ b7 = ((u32)adc_press - b3) * (50000 >> oss);
+ if (b7 < 0x80000000)
+ p = (b7 * 2) / b4;
+ else
+ p = (b7 / b4) * 2;
+
+ x1 = (p >> 8) * (p >> 8);
+ x1 = (x1 * 3038) >> 16;
+ x2 = (-7357 * p) >> 16;
+
+ return p + ((x1 + x2 + 3791) >> 4);
+}
+
+static int bmp180_read_press(struct bmp280_data *data,
+ int *val, int *val2)
+{
+ int ret;
+ s32 adc_press;
+ u32 comp_press;
+
+ /* Read and compensate temperature so we get a reading of t_fine. */
+ ret = bmp180_read_temp(data, NULL);
+ if (ret)
+ return ret;
+
+ ret = bmp180_read_adc_press(data, &adc_press);
+ if (ret)
+ return ret;
+
+ comp_press = bmp180_compensate_press(data, adc_press);
+
+ *val = comp_press;
+ *val2 = 1000;
+
+ return IIO_VAL_FRACTIONAL;
+}
+
+static int bmp180_chip_config(struct bmp280_data *data)
+{
+ return 0;
+}
+
+static const int bmp180_oversampling_temp_avail[] = { 1 };
+static const int bmp180_oversampling_press_avail[] = { 1, 2, 4, 8 };
+
+static const struct bmp280_chip_info bmp180_chip_info = {
+ .regmap_config = &bmp180_regmap_config,
+
+ .oversampling_temp_avail = bmp180_oversampling_temp_avail,
+ .num_oversampling_temp_avail =
+ ARRAY_SIZE(bmp180_oversampling_temp_avail),
+
+ .oversampling_press_avail = bmp180_oversampling_press_avail,
+ .num_oversampling_press_avail =
+ ARRAY_SIZE(bmp180_oversampling_press_avail),
+
+ .chip_config = bmp180_chip_config,
+ .read_temp = bmp180_read_temp,
+ .read_press = bmp180_read_press,
+};
+
static int bmp280_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -367,7 +853,23 @@ static int bmp280_probe(struct i2c_client *client,
indio_dev->info = &bmp280_info;
indio_dev->modes = INDIO_DIRECT_MODE;
- data->regmap = devm_regmap_init_i2c(client, &bmp280_regmap_config);
+ switch (id->driver_data) {
+ case BMP180_CHIP_ID:
+ data->chip_info = &bmp180_chip_info;
+ data->oversampling_press = ilog2(8);
+ data->oversampling_temp = ilog2(1);
+ break;
+ case BMP280_CHIP_ID:
+ data->chip_info = &bmp280_chip_info;
+ data->oversampling_press = ilog2(16);
+ data->oversampling_temp = ilog2(2);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ data->regmap = devm_regmap_init_i2c(client,
+ data->chip_info->regmap_config);
if (IS_ERR(data->regmap)) {
dev_err(&client->dev, "failed to allocate register map\n");
return PTR_ERR(data->regmap);
@@ -376,13 +878,13 @@ static int bmp280_probe(struct i2c_client *client,
ret = regmap_read(data->regmap, BMP280_REG_ID, &chip_id);
if (ret < 0)
return ret;
- if (chip_id != BMP280_CHIP_ID) {
+ if (chip_id != id->driver_data) {
dev_err(&client->dev, "bad chip id. expected %x got %x\n",
BMP280_CHIP_ID, chip_id);
return -EINVAL;
}
- ret = bmp280_chip_init(data);
+ ret = data->chip_info->chip_config(data);
if (ret < 0)
return ret;
@@ -390,13 +892,17 @@ static int bmp280_probe(struct i2c_client *client,
}
static const struct acpi_device_id bmp280_acpi_match[] = {
- {"BMP0280", 0},
+ {"BMP0280", BMP280_CHIP_ID },
+ {"BMP0180", BMP180_CHIP_ID },
+ {"BMP0085", BMP180_CHIP_ID },
{ },
};
MODULE_DEVICE_TABLE(acpi, bmp280_acpi_match);
static const struct i2c_device_id bmp280_id[] = {
- {"bmp280", 0},
+ {"bmp280", BMP280_CHIP_ID },
+ {"bmp180", BMP180_CHIP_ID },
+ {"bmp085", BMP180_CHIP_ID },
{ },
};
MODULE_DEVICE_TABLE(i2c, bmp280_id);
@@ -412,5 +918,5 @@ static struct i2c_driver bmp280_driver = {
module_i2c_driver(bmp280_driver);
MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>");
-MODULE_DESCRIPTION("Driver for Bosch Sensortec BMP280 pressure and temperature sensor");
+MODULE_DESCRIPTION("Driver for Bosch Sensortec BMP180/BMP280 pressure and temperature sensor");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/pressure/hp03.c b/drivers/iio/pressure/hp03.c
new file mode 100644
index 000000000000..ac76515d5d49
--- /dev/null
+++ b/drivers/iio/pressure/hp03.c
@@ -0,0 +1,312 @@
+/*
+ * Copyright (c) 2016 Marek Vasut <marex@denx.de>
+ *
+ * Driver for Hope RF HP03 digital temperature and pressure sensor.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) "hp03: " fmt
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+/*
+ * The HP03 sensor occupies two fixed I2C addresses:
+ * 0x50 ... read-only EEPROM with calibration data
+ * 0x77 ... read-write ADC for pressure and temperature
+ */
+#define HP03_EEPROM_ADDR 0x50
+#define HP03_ADC_ADDR 0x77
+
+#define HP03_EEPROM_CX_OFFSET 0x10
+#define HP03_EEPROM_AB_OFFSET 0x1e
+#define HP03_EEPROM_CD_OFFSET 0x20
+
+#define HP03_ADC_WRITE_REG 0xff
+#define HP03_ADC_READ_REG 0xfd
+#define HP03_ADC_READ_PRESSURE 0xf0 /* D1 in datasheet */
+#define HP03_ADC_READ_TEMP 0xe8 /* D2 in datasheet */
+
+struct hp03_priv {
+ struct i2c_client *client;
+ struct mutex lock;
+ struct gpio_desc *xclr_gpio;
+
+ struct i2c_client *eeprom_client;
+ struct regmap *eeprom_regmap;
+
+ s32 pressure; /* kPa */
+ s32 temp; /* Deg. C */
+};
+
+static const struct iio_chan_spec hp03_channels[] = {
+ {
+ .type = IIO_PRESSURE,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ },
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ },
+};
+
+static bool hp03_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+ return false;
+}
+
+static bool hp03_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ return false;
+}
+
+static const struct regmap_config hp03_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = HP03_EEPROM_CD_OFFSET + 1,
+ .cache_type = REGCACHE_RBTREE,
+
+ .writeable_reg = hp03_is_writeable_reg,
+ .volatile_reg = hp03_is_volatile_reg,
+};
+
+static int hp03_get_temp_pressure(struct hp03_priv *priv, const u8 reg)
+{
+ int ret;
+
+ ret = i2c_smbus_write_byte_data(priv->client, HP03_ADC_WRITE_REG, reg);
+ if (ret < 0)
+ return ret;
+
+ msleep(50); /* Wait for conversion to finish */
+
+ return i2c_smbus_read_word_data(priv->client, HP03_ADC_READ_REG);
+}
+
+static int hp03_update_temp_pressure(struct hp03_priv *priv)
+{
+ struct device *dev = &priv->client->dev;
+ u8 coefs[18];
+ u16 cx_val[7];
+ int ab_val, d1_val, d2_val, diff_val, dut, off, sens, x;
+ int i, ret;
+
+ /* Sample coefficients from EEPROM */
+ ret = regmap_bulk_read(priv->eeprom_regmap, HP03_EEPROM_CX_OFFSET,
+ coefs, sizeof(coefs));
+ if (ret < 0) {
+ dev_err(dev, "Failed to read EEPROM (reg=%02x)\n",
+ HP03_EEPROM_CX_OFFSET);
+ return ret;
+ }
+
+ /* Sample Temperature and Pressure */
+ gpiod_set_value_cansleep(priv->xclr_gpio, 1);
+
+ ret = hp03_get_temp_pressure(priv, HP03_ADC_READ_PRESSURE);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read pressure\n");
+ goto err_adc;
+ }
+ d1_val = ret;
+
+ ret = hp03_get_temp_pressure(priv, HP03_ADC_READ_TEMP);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read temperature\n");
+ goto err_adc;
+ }
+ d2_val = ret;
+
+ gpiod_set_value_cansleep(priv->xclr_gpio, 0);
+
+ /* The Cx coefficients and Temp/Pressure values are MSB first. */
+ for (i = 0; i < 7; i++)
+ cx_val[i] = (coefs[2 * i] << 8) | (coefs[(2 * i) + 1] << 0);
+ d1_val = ((d1_val >> 8) & 0xff) | ((d1_val & 0xff) << 8);
+ d2_val = ((d2_val >> 8) & 0xff) | ((d2_val & 0xff) << 8);
+
+ /* Coefficient voodoo from the HP03 datasheet. */
+ if (d2_val >= cx_val[4])
+ ab_val = coefs[14]; /* A-value */
+ else
+ ab_val = coefs[15]; /* B-value */
+
+ diff_val = d2_val - cx_val[4];
+ dut = (ab_val * (diff_val >> 7) * (diff_val >> 7)) >> coefs[16];
+ dut = diff_val - dut;
+
+ off = (cx_val[1] + (((cx_val[3] - 1024) * dut) >> 14)) * 4;
+ sens = cx_val[0] + ((cx_val[2] * dut) >> 10);
+ x = ((sens * (d1_val - 7168)) >> 14) - off;
+
+ priv->pressure = ((x * 100) >> 5) + (cx_val[6] * 10);
+ priv->temp = 250 + ((dut * cx_val[5]) >> 16) - (dut >> coefs[17]);
+
+ return 0;
+
+err_adc:
+ gpiod_set_value_cansleep(priv->xclr_gpio, 0);
+ return ret;
+}
+
+static int hp03_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct hp03_priv *priv = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&priv->lock);
+ ret = hp03_update_temp_pressure(priv);
+ mutex_unlock(&priv->lock);
+
+ if (ret)
+ return ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ switch (chan->type) {
+ case IIO_PRESSURE:
+ *val = priv->pressure;
+ return IIO_VAL_INT;
+ case IIO_TEMP:
+ *val = priv->temp;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_PRESSURE:
+ *val = 0;
+ *val2 = 1000;
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_TEMP:
+ *val = 10;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return -EINVAL;
+}
+
+static const struct iio_info hp03_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = &hp03_read_raw,
+};
+
+static int hp03_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct iio_dev *indio_dev;
+ struct hp03_priv *priv;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ priv = iio_priv(indio_dev);
+ priv->client = client;
+ mutex_init(&priv->lock);
+
+ indio_dev->dev.parent = dev;
+ indio_dev->name = id->name;
+ indio_dev->channels = hp03_channels;
+ indio_dev->num_channels = ARRAY_SIZE(hp03_channels);
+ indio_dev->info = &hp03_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ priv->xclr_gpio = devm_gpiod_get_index(dev, "xclr", 0, GPIOD_OUT_HIGH);
+ if (IS_ERR(priv->xclr_gpio)) {
+ dev_err(dev, "Failed to claim XCLR GPIO\n");
+ ret = PTR_ERR(priv->xclr_gpio);
+ return ret;
+ }
+
+ /*
+ * Allocate another device for the on-sensor EEPROM,
+ * which has it's dedicated I2C address and contains
+ * the calibration constants for the sensor.
+ */
+ priv->eeprom_client = i2c_new_dummy(client->adapter, HP03_EEPROM_ADDR);
+ if (!priv->eeprom_client) {
+ dev_err(dev, "New EEPROM I2C device failed\n");
+ return -ENODEV;
+ }
+
+ priv->eeprom_regmap = regmap_init_i2c(priv->eeprom_client,
+ &hp03_regmap_config);
+ if (IS_ERR(priv->eeprom_regmap)) {
+ dev_err(dev, "Failed to allocate EEPROM regmap\n");
+ ret = PTR_ERR(priv->eeprom_regmap);
+ goto err_cleanup_eeprom_client;
+ }
+
+ ret = iio_device_register(indio_dev);
+ if (ret) {
+ dev_err(dev, "Failed to register IIO device\n");
+ goto err_cleanup_eeprom_regmap;
+ }
+
+ i2c_set_clientdata(client, indio_dev);
+
+ return 0;
+
+err_cleanup_eeprom_regmap:
+ regmap_exit(priv->eeprom_regmap);
+
+err_cleanup_eeprom_client:
+ i2c_unregister_device(priv->eeprom_client);
+ return ret;
+}
+
+static int hp03_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct hp03_priv *priv = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ regmap_exit(priv->eeprom_regmap);
+ i2c_unregister_device(priv->eeprom_client);
+
+ return 0;
+}
+
+static const struct i2c_device_id hp03_id[] = {
+ { "hp03", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, hp03_id);
+
+static struct i2c_driver hp03_driver = {
+ .driver = {
+ .name = "hp03",
+ },
+ .probe = hp03_probe,
+ .remove = hp03_remove,
+ .id_table = hp03_id,
+};
+module_i2c_driver(hp03_driver);
+
+MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
+MODULE_DESCRIPTION("Driver for Hope RF HP03 pressure and temperature sensor");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/pressure/hp206c.c b/drivers/iio/pressure/hp206c.c
new file mode 100644
index 000000000000..90f2b6e4a920
--- /dev/null
+++ b/drivers/iio/pressure/hp206c.c
@@ -0,0 +1,426 @@
+/*
+ * hp206c.c - HOPERF HP206C precision barometer and altimeter sensor
+ *
+ * Copyright (c) 2016, Intel Corporation.
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * (7-bit I2C slave address 0x76)
+ *
+ * Datasheet:
+ * http://www.hoperf.com/upload/sensor/HP206C_DataSheet_EN_V2.0.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/delay.h>
+#include <linux/util_macros.h>
+#include <linux/acpi.h>
+
+/* I2C commands: */
+#define HP206C_CMD_SOFT_RST 0x06
+
+#define HP206C_CMD_ADC_CVT 0x40
+
+#define HP206C_CMD_ADC_CVT_OSR_4096 0x00
+#define HP206C_CMD_ADC_CVT_OSR_2048 0x04
+#define HP206C_CMD_ADC_CVT_OSR_1024 0x08
+#define HP206C_CMD_ADC_CVT_OSR_512 0x0c
+#define HP206C_CMD_ADC_CVT_OSR_256 0x10
+#define HP206C_CMD_ADC_CVT_OSR_128 0x14
+
+#define HP206C_CMD_ADC_CVT_CHNL_PT 0x00
+#define HP206C_CMD_ADC_CVT_CHNL_T 0x02
+
+#define HP206C_CMD_READ_P 0x30
+#define HP206C_CMD_READ_T 0x32
+
+#define HP206C_CMD_READ_REG 0x80
+#define HP206C_CMD_WRITE_REG 0xc0
+
+#define HP206C_REG_INT_EN 0x0b
+#define HP206C_REG_INT_CFG 0x0c
+
+#define HP206C_REG_INT_SRC 0x0d
+#define HP206C_FLAG_DEV_RDY 0x40
+
+#define HP206C_REG_PARA 0x0f
+#define HP206C_FLAG_CMPS_EN 0x80
+
+/* Maximum spin for DEV_RDY */
+#define HP206C_MAX_DEV_RDY_WAIT_COUNT 20
+#define HP206C_DEV_RDY_WAIT_US 20000
+
+struct hp206c_data {
+ struct mutex mutex;
+ struct i2c_client *client;
+ int temp_osr_index;
+ int pres_osr_index;
+};
+
+struct hp206c_osr_setting {
+ u8 osr_mask;
+ unsigned int temp_conv_time_us;
+ unsigned int pres_conv_time_us;
+};
+
+/* Data from Table 5 in datasheet. */
+static const struct hp206c_osr_setting hp206c_osr_settings[] = {
+ { HP206C_CMD_ADC_CVT_OSR_4096, 65600, 131100 },
+ { HP206C_CMD_ADC_CVT_OSR_2048, 32800, 65600 },
+ { HP206C_CMD_ADC_CVT_OSR_1024, 16400, 32800 },
+ { HP206C_CMD_ADC_CVT_OSR_512, 8200, 16400 },
+ { HP206C_CMD_ADC_CVT_OSR_256, 4100, 8200 },
+ { HP206C_CMD_ADC_CVT_OSR_128, 2100, 4100 },
+};
+static const int hp206c_osr_rates[] = { 4096, 2048, 1024, 512, 256, 128 };
+static const char hp206c_osr_rates_str[] = "4096 2048 1024 512 256 128";
+
+static inline int hp206c_read_reg(struct i2c_client *client, u8 reg)
+{
+ return i2c_smbus_read_byte_data(client, HP206C_CMD_READ_REG | reg);
+}
+
+static inline int hp206c_write_reg(struct i2c_client *client, u8 reg, u8 val)
+{
+ return i2c_smbus_write_byte_data(client,
+ HP206C_CMD_WRITE_REG | reg, val);
+}
+
+static int hp206c_read_20bit(struct i2c_client *client, u8 cmd)
+{
+ int ret;
+ u8 values[3];
+
+ ret = i2c_smbus_read_i2c_block_data(client, cmd, 3, values);
+ if (ret < 0)
+ return ret;
+ if (ret != 3)
+ return -EIO;
+ return ((values[0] & 0xF) << 16) | (values[1] << 8) | (values[2]);
+}
+
+/* Spin for max 160ms until DEV_RDY is 1, or return error. */
+static int hp206c_wait_dev_rdy(struct iio_dev *indio_dev)
+{
+ int ret;
+ int count = 0;
+ struct hp206c_data *data = iio_priv(indio_dev);
+ struct i2c_client *client = data->client;
+
+ while (++count <= HP206C_MAX_DEV_RDY_WAIT_COUNT) {
+ ret = hp206c_read_reg(client, HP206C_REG_INT_SRC);
+ if (ret < 0) {
+ dev_err(&indio_dev->dev, "Failed READ_REG INT_SRC: %d\n", ret);
+ return ret;
+ }
+ if (ret & HP206C_FLAG_DEV_RDY)
+ return 0;
+ usleep_range(HP206C_DEV_RDY_WAIT_US, HP206C_DEV_RDY_WAIT_US * 3 / 2);
+ }
+ return -ETIMEDOUT;
+}
+
+static int hp206c_set_compensation(struct i2c_client *client, bool enabled)
+{
+ int val;
+
+ val = hp206c_read_reg(client, HP206C_REG_PARA);
+ if (val < 0)
+ return val;
+ if (enabled)
+ val |= HP206C_FLAG_CMPS_EN;
+ else
+ val &= ~HP206C_FLAG_CMPS_EN;
+
+ return hp206c_write_reg(client, HP206C_REG_PARA, val);
+}
+
+/* Do a soft reset */
+static int hp206c_soft_reset(struct iio_dev *indio_dev)
+{
+ int ret;
+ struct hp206c_data *data = iio_priv(indio_dev);
+ struct i2c_client *client = data->client;
+
+ ret = i2c_smbus_write_byte(client, HP206C_CMD_SOFT_RST);
+ if (ret) {
+ dev_err(&client->dev, "Failed to reset device: %d\n", ret);
+ return ret;
+ }
+
+ usleep_range(400, 600);
+
+ ret = hp206c_wait_dev_rdy(indio_dev);
+ if (ret) {
+ dev_err(&client->dev, "Device not ready after soft reset: %d\n", ret);
+ return ret;
+ }
+
+ ret = hp206c_set_compensation(client, true);
+ if (ret)
+ dev_err(&client->dev, "Failed to enable compensation: %d\n", ret);
+ return ret;
+}
+
+static int hp206c_conv_and_read(struct iio_dev *indio_dev,
+ u8 conv_cmd, u8 read_cmd,
+ unsigned int sleep_us)
+{
+ int ret;
+ struct hp206c_data *data = iio_priv(indio_dev);
+ struct i2c_client *client = data->client;
+
+ ret = hp206c_wait_dev_rdy(indio_dev);
+ if (ret < 0) {
+ dev_err(&indio_dev->dev, "Device not ready: %d\n", ret);
+ return ret;
+ }
+
+ ret = i2c_smbus_write_byte(client, conv_cmd);
+ if (ret < 0) {
+ dev_err(&indio_dev->dev, "Failed convert: %d\n", ret);
+ return ret;
+ }
+
+ usleep_range(sleep_us, sleep_us * 3 / 2);
+
+ ret = hp206c_wait_dev_rdy(indio_dev);
+ if (ret < 0) {
+ dev_err(&indio_dev->dev, "Device not ready: %d\n", ret);
+ return ret;
+ }
+
+ ret = hp206c_read_20bit(client, read_cmd);
+ if (ret < 0)
+ dev_err(&indio_dev->dev, "Failed read: %d\n", ret);
+
+ return ret;
+}
+
+static int hp206c_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ int ret;
+ struct hp206c_data *data = iio_priv(indio_dev);
+ const struct hp206c_osr_setting *osr_setting;
+ u8 conv_cmd;
+
+ mutex_lock(&data->mutex);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ switch (chan->type) {
+ case IIO_TEMP:
+ *val = hp206c_osr_rates[data->temp_osr_index];
+ ret = IIO_VAL_INT;
+ break;
+
+ case IIO_PRESSURE:
+ *val = hp206c_osr_rates[data->pres_osr_index];
+ ret = IIO_VAL_INT;
+ break;
+ default:
+ ret = -EINVAL;
+ }
+ break;
+
+ case IIO_CHAN_INFO_RAW:
+ switch (chan->type) {
+ case IIO_TEMP:
+ osr_setting = &hp206c_osr_settings[data->temp_osr_index];
+ conv_cmd = HP206C_CMD_ADC_CVT |
+ osr_setting->osr_mask |
+ HP206C_CMD_ADC_CVT_CHNL_T;
+ ret = hp206c_conv_and_read(indio_dev,
+ conv_cmd,
+ HP206C_CMD_READ_T,
+ osr_setting->temp_conv_time_us);
+ if (ret >= 0) {
+ /* 20 significant bits are provided.
+ * Extend sign over the rest.
+ */
+ *val = sign_extend32(ret, 19);
+ ret = IIO_VAL_INT;
+ }
+ break;
+
+ case IIO_PRESSURE:
+ osr_setting = &hp206c_osr_settings[data->pres_osr_index];
+ conv_cmd = HP206C_CMD_ADC_CVT |
+ osr_setting->osr_mask |
+ HP206C_CMD_ADC_CVT_CHNL_PT;
+ ret = hp206c_conv_and_read(indio_dev,
+ conv_cmd,
+ HP206C_CMD_READ_P,
+ osr_setting->pres_conv_time_us);
+ if (ret >= 0) {
+ *val = ret;
+ ret = IIO_VAL_INT;
+ }
+ break;
+ default:
+ ret = -EINVAL;
+ }
+ break;
+
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_TEMP:
+ *val = 0;
+ *val2 = 10000;
+ ret = IIO_VAL_INT_PLUS_MICRO;
+ break;
+
+ case IIO_PRESSURE:
+ *val = 0;
+ *val2 = 1000;
+ ret = IIO_VAL_INT_PLUS_MICRO;
+ break;
+ default:
+ ret = -EINVAL;
+ }
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ mutex_unlock(&data->mutex);
+ return ret;
+}
+
+static int hp206c_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ int ret = 0;
+ struct hp206c_data *data = iio_priv(indio_dev);
+
+ if (mask != IIO_CHAN_INFO_OVERSAMPLING_RATIO)
+ return -EINVAL;
+ mutex_lock(&data->mutex);
+ switch (chan->type) {
+ case IIO_TEMP:
+ data->temp_osr_index = find_closest_descending(val,
+ hp206c_osr_rates, ARRAY_SIZE(hp206c_osr_rates));
+ break;
+ case IIO_PRESSURE:
+ data->pres_osr_index = find_closest_descending(val,
+ hp206c_osr_rates, ARRAY_SIZE(hp206c_osr_rates));
+ break;
+ default:
+ ret = -EINVAL;
+ }
+ mutex_unlock(&data->mutex);
+ return ret;
+}
+
+static const struct iio_chan_spec hp206c_channels[] = {
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ },
+ {
+ .type = IIO_PRESSURE,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ }
+};
+
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(hp206c_osr_rates_str);
+
+static struct attribute *hp206c_attributes[] = {
+ &iio_const_attr_sampling_frequency_available.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group hp206c_attribute_group = {
+ .attrs = hp206c_attributes,
+};
+
+static const struct iio_info hp206c_info = {
+ .attrs = &hp206c_attribute_group,
+ .read_raw = hp206c_read_raw,
+ .write_raw = hp206c_write_raw,
+ .driver_module = THIS_MODULE,
+};
+
+static int hp206c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct iio_dev *indio_dev;
+ struct hp206c_data *data;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
+ dev_err(&client->dev, "Adapter does not support "
+ "all required i2c functionality\n");
+ return -ENODEV;
+ }
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ data->client = client;
+ mutex_init(&data->mutex);
+
+ indio_dev->info = &hp206c_info;
+ indio_dev->name = id->name;
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = hp206c_channels;
+ indio_dev->num_channels = ARRAY_SIZE(hp206c_channels);
+
+ i2c_set_clientdata(client, indio_dev);
+
+ /* Do a soft reset on probe */
+ ret = hp206c_soft_reset(indio_dev);
+ if (ret) {
+ dev_err(&client->dev, "Failed to reset on startup: %d\n", ret);
+ return -ENODEV;
+ }
+
+ return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct i2c_device_id hp206c_id[] = {
+ {"hp206c"},
+ {}
+};
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id hp206c_acpi_match[] = {
+ {"HOP206C", 0},
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, hp206c_acpi_match);
+#endif
+
+static struct i2c_driver hp206c_driver = {
+ .probe = hp206c_probe,
+ .id_table = hp206c_id,
+ .driver = {
+ .name = "hp206c",
+ .acpi_match_table = ACPI_PTR(hp206c_acpi_match),
+ },
+};
+
+module_i2c_driver(hp206c_driver);
+
+MODULE_DESCRIPTION("HOPERF HP206C precision barometer and altimeter sensor");
+MODULE_AUTHOR("Leonard Crestez <leonard.crestez@intel.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/pressure/ms5611.h b/drivers/iio/pressure/ms5611.h
index 8b08e4b7e3a9..ccda63c5b3c3 100644
--- a/drivers/iio/pressure/ms5611.h
+++ b/drivers/iio/pressure/ms5611.h
@@ -16,15 +16,11 @@
#include <linux/iio/iio.h>
#include <linux/mutex.h>
+struct regulator;
+
#define MS5611_RESET 0x1e
#define MS5611_READ_ADC 0x00
#define MS5611_READ_PROM_WORD 0xA0
-#define MS5611_START_TEMP_CONV 0x58
-#define MS5611_START_PRESSURE_CONV 0x48
-
-#define MS5611_CONV_TIME_MIN 9040
-#define MS5611_CONV_TIME_MAX 10000
-
#define MS5611_PROM_WORDS_NB 8
enum {
@@ -39,16 +35,31 @@ struct ms5611_chip_info {
s32 *temp, s32 *pressure);
};
+/*
+ * OverSampling Rate descriptor.
+ * Warning: cmd MUST be kept aligned on a word boundary (see
+ * m5611_spi_read_adc_temp_and_pressure in ms5611_spi.c).
+ */
+struct ms5611_osr {
+ unsigned long conv_usec;
+ u8 cmd;
+ unsigned short rate;
+};
+
struct ms5611_state {
void *client;
struct mutex lock;
+ const struct ms5611_osr *pressure_osr;
+ const struct ms5611_osr *temp_osr;
+
int (*reset)(struct device *dev);
int (*read_prom_word)(struct device *dev, int index, u16 *word);
int (*read_adc_temp_and_pressure)(struct device *dev,
s32 *temp, s32 *pressure);
struct ms5611_chip_info *chip_info;
+ struct regulator *vdd;
};
int ms5611_probe(struct iio_dev *indio_dev, struct device *dev,
diff --git a/drivers/iio/pressure/ms5611_core.c b/drivers/iio/pressure/ms5611_core.c
index 992ad8d3b67a..76578b07bb6e 100644
--- a/drivers/iio/pressure/ms5611_core.c
+++ b/drivers/iio/pressure/ms5611_core.c
@@ -18,11 +18,44 @@
#include <linux/delay.h>
#include <linux/regulator/consumer.h>
+#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/iio/trigger_consumer.h>
#include "ms5611.h"
+#define MS5611_INIT_OSR(_cmd, _conv_usec, _rate) \
+ { .cmd = _cmd, .conv_usec = _conv_usec, .rate = _rate }
+
+static const struct ms5611_osr ms5611_avail_pressure_osr[] = {
+ MS5611_INIT_OSR(0x40, 600, 256),
+ MS5611_INIT_OSR(0x42, 1170, 512),
+ MS5611_INIT_OSR(0x44, 2280, 1024),
+ MS5611_INIT_OSR(0x46, 4540, 2048),
+ MS5611_INIT_OSR(0x48, 9040, 4096)
+};
+
+static const struct ms5611_osr ms5611_avail_temp_osr[] = {
+ MS5611_INIT_OSR(0x50, 600, 256),
+ MS5611_INIT_OSR(0x52, 1170, 512),
+ MS5611_INIT_OSR(0x54, 2280, 1024),
+ MS5611_INIT_OSR(0x56, 4540, 2048),
+ MS5611_INIT_OSR(0x58, 9040, 4096)
+};
+
+static const char ms5611_show_osr[] = "256 512 1024 2048 4096";
+
+static IIO_CONST_ATTR(oversampling_ratio_available, ms5611_show_osr);
+
+static struct attribute *ms5611_attributes[] = {
+ &iio_const_attr_oversampling_ratio_available.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group ms5611_attribute_group = {
+ .attrs = ms5611_attributes,
+};
+
static bool ms5611_prom_is_valid(u16 *prom, size_t len)
{
int i, j;
@@ -239,11 +272,70 @@ static int ms5611_read_raw(struct iio_dev *indio_dev,
default:
return -EINVAL;
}
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ if (chan->type != IIO_TEMP && chan->type != IIO_PRESSURE)
+ break;
+ mutex_lock(&st->lock);
+ if (chan->type == IIO_TEMP)
+ *val = (int)st->temp_osr->rate;
+ else
+ *val = (int)st->pressure_osr->rate;
+ mutex_unlock(&st->lock);
+ return IIO_VAL_INT;
}
return -EINVAL;
}
+static const struct ms5611_osr *ms5611_find_osr(int rate,
+ const struct ms5611_osr *osr,
+ size_t count)
+{
+ unsigned int r;
+
+ for (r = 0; r < count; r++)
+ if ((unsigned short)rate == osr[r].rate)
+ break;
+ if (r >= count)
+ return NULL;
+ return &osr[r];
+}
+
+static int ms5611_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct ms5611_state *st = iio_priv(indio_dev);
+ const struct ms5611_osr *osr = NULL;
+
+ if (mask != IIO_CHAN_INFO_OVERSAMPLING_RATIO)
+ return -EINVAL;
+
+ if (chan->type == IIO_TEMP)
+ osr = ms5611_find_osr(val, ms5611_avail_temp_osr,
+ ARRAY_SIZE(ms5611_avail_temp_osr));
+ else if (chan->type == IIO_PRESSURE)
+ osr = ms5611_find_osr(val, ms5611_avail_pressure_osr,
+ ARRAY_SIZE(ms5611_avail_pressure_osr));
+ if (!osr)
+ return -EINVAL;
+
+ mutex_lock(&st->lock);
+
+ if (iio_buffer_enabled(indio_dev)) {
+ mutex_unlock(&st->lock);
+ return -EBUSY;
+ }
+
+ if (chan->type == IIO_TEMP)
+ st->temp_osr = osr;
+ else
+ st->pressure_osr = osr;
+
+ mutex_unlock(&st->lock);
+ return 0;
+}
+
static const unsigned long ms5611_scan_masks[] = {0x3, 0};
static struct ms5611_chip_info chip_info_tbl[] = {
@@ -259,7 +351,8 @@ static const struct iio_chan_spec ms5611_channels[] = {
{
.type = IIO_PRESSURE,
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
- BIT(IIO_CHAN_INFO_SCALE),
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
.scan_index = 0,
.scan_type = {
.sign = 's',
@@ -271,7 +364,8 @@ static const struct iio_chan_spec ms5611_channels[] = {
{
.type = IIO_TEMP,
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
- BIT(IIO_CHAN_INFO_SCALE),
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
.scan_index = 1,
.scan_type = {
.sign = 's',
@@ -285,40 +379,68 @@ static const struct iio_chan_spec ms5611_channels[] = {
static const struct iio_info ms5611_info = {
.read_raw = &ms5611_read_raw,
+ .write_raw = &ms5611_write_raw,
+ .attrs = &ms5611_attribute_group,
.driver_module = THIS_MODULE,
};
static int ms5611_init(struct iio_dev *indio_dev)
{
int ret;
- struct regulator *vdd = devm_regulator_get(indio_dev->dev.parent,
- "vdd");
+ struct ms5611_state *st = iio_priv(indio_dev);
/* Enable attached regulator if any. */
- if (!IS_ERR(vdd)) {
- ret = regulator_enable(vdd);
+ st->vdd = devm_regulator_get(indio_dev->dev.parent, "vdd");
+ if (!IS_ERR(st->vdd)) {
+ ret = regulator_enable(st->vdd);
if (ret) {
dev_err(indio_dev->dev.parent,
- "failed to enable Vdd supply: %d\n", ret);
+ "failed to enable Vdd supply: %d\n", ret);
return ret;
}
+ } else {
+ ret = PTR_ERR(st->vdd);
+ if (ret != -ENODEV)
+ return ret;
}
ret = ms5611_reset(indio_dev);
if (ret < 0)
- return ret;
+ goto err_regulator_disable;
- return ms5611_read_prom(indio_dev);
+ ret = ms5611_read_prom(indio_dev);
+ if (ret < 0)
+ goto err_regulator_disable;
+
+ return 0;
+
+err_regulator_disable:
+ if (!IS_ERR_OR_NULL(st->vdd))
+ regulator_disable(st->vdd);
+ return ret;
+}
+
+static void ms5611_fini(const struct iio_dev *indio_dev)
+{
+ const struct ms5611_state *st = iio_priv(indio_dev);
+
+ if (!IS_ERR_OR_NULL(st->vdd))
+ regulator_disable(st->vdd);
}
int ms5611_probe(struct iio_dev *indio_dev, struct device *dev,
- const char *name, int type)
+ const char *name, int type)
{
int ret;
struct ms5611_state *st = iio_priv(indio_dev);
mutex_init(&st->lock);
st->chip_info = &chip_info_tbl[type];
+ st->temp_osr =
+ &ms5611_avail_temp_osr[ARRAY_SIZE(ms5611_avail_temp_osr) - 1];
+ st->pressure_osr =
+ &ms5611_avail_pressure_osr[ARRAY_SIZE(ms5611_avail_pressure_osr)
+ - 1];
indio_dev->dev.parent = dev;
indio_dev->name = name;
indio_dev->info = &ms5611_info;
@@ -335,7 +457,7 @@ int ms5611_probe(struct iio_dev *indio_dev, struct device *dev,
ms5611_trigger_handler, NULL);
if (ret < 0) {
dev_err(dev, "iio triggered buffer setup failed\n");
- return ret;
+ goto err_fini;
}
ret = iio_device_register(indio_dev);
@@ -348,7 +470,8 @@ int ms5611_probe(struct iio_dev *indio_dev, struct device *dev,
err_buffer_cleanup:
iio_triggered_buffer_cleanup(indio_dev);
-
+err_fini:
+ ms5611_fini(indio_dev);
return ret;
}
EXPORT_SYMBOL(ms5611_probe);
@@ -357,6 +480,7 @@ int ms5611_remove(struct iio_dev *indio_dev)
{
iio_device_unregister(indio_dev);
iio_triggered_buffer_cleanup(indio_dev);
+ ms5611_fini(indio_dev);
return 0;
}
diff --git a/drivers/iio/pressure/ms5611_i2c.c b/drivers/iio/pressure/ms5611_i2c.c
index 7f6fc8eee922..55fb5fc0b6ea 100644
--- a/drivers/iio/pressure/ms5611_i2c.c
+++ b/drivers/iio/pressure/ms5611_i2c.c
@@ -17,6 +17,7 @@
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include "ms5611.h"
@@ -62,23 +63,23 @@ static int ms5611_i2c_read_adc_temp_and_pressure(struct device *dev,
{
int ret;
struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev));
+ const struct ms5611_osr *osr = st->temp_osr;
- ret = i2c_smbus_write_byte(st->client, MS5611_START_TEMP_CONV);
+ ret = i2c_smbus_write_byte(st->client, osr->cmd);
if (ret < 0)
return ret;
- usleep_range(MS5611_CONV_TIME_MIN, MS5611_CONV_TIME_MAX);
-
+ usleep_range(osr->conv_usec, osr->conv_usec + (osr->conv_usec / 10UL));
ret = ms5611_i2c_read_adc(st, temp);
if (ret < 0)
return ret;
- ret = i2c_smbus_write_byte(st->client, MS5611_START_PRESSURE_CONV);
+ osr = st->pressure_osr;
+ ret = i2c_smbus_write_byte(st->client, osr->cmd);
if (ret < 0)
return ret;
- usleep_range(MS5611_CONV_TIME_MIN, MS5611_CONV_TIME_MAX);
-
+ usleep_range(osr->conv_usec, osr->conv_usec + (osr->conv_usec / 10UL));
return ms5611_i2c_read_adc(st, pressure);
}
@@ -113,6 +114,17 @@ static int ms5611_i2c_remove(struct i2c_client *client)
return ms5611_remove(i2c_get_clientdata(client));
}
+#if defined(CONFIG_OF)
+static const struct of_device_id ms5611_i2c_matches[] = {
+ { .compatible = "meas,ms5611" },
+ { .compatible = "ms5611" },
+ { .compatible = "meas,ms5607" },
+ { .compatible = "ms5607" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ms5611_i2c_matches);
+#endif
+
static const struct i2c_device_id ms5611_id[] = {
{ "ms5611", MS5611 },
{ "ms5607", MS5607 },
@@ -123,6 +135,7 @@ MODULE_DEVICE_TABLE(i2c, ms5611_id);
static struct i2c_driver ms5611_driver = {
.driver = {
.name = "ms5611",
+ .of_match_table = of_match_ptr(ms5611_i2c_matches)
},
.id_table = ms5611_id,
.probe = ms5611_i2c_probe,
diff --git a/drivers/iio/pressure/ms5611_spi.c b/drivers/iio/pressure/ms5611_spi.c
index 5cc009e85f0e..932e05001e1a 100644
--- a/drivers/iio/pressure/ms5611_spi.c
+++ b/drivers/iio/pressure/ms5611_spi.c
@@ -12,6 +12,7 @@
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/spi/spi.h>
+#include <linux/of_device.h>
#include "ms5611.h"
@@ -55,28 +56,29 @@ static int ms5611_spi_read_adc(struct device *dev, s32 *val)
static int ms5611_spi_read_adc_temp_and_pressure(struct device *dev,
s32 *temp, s32 *pressure)
{
- u8 cmd;
int ret;
struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev));
+ const struct ms5611_osr *osr = st->temp_osr;
- cmd = MS5611_START_TEMP_CONV;
- ret = spi_write_then_read(st->client, &cmd, 1, NULL, 0);
+ /*
+ * Warning: &osr->cmd MUST be aligned on a word boundary since used as
+ * 2nd argument (void*) of spi_write_then_read.
+ */
+ ret = spi_write_then_read(st->client, &osr->cmd, 1, NULL, 0);
if (ret < 0)
return ret;
- usleep_range(MS5611_CONV_TIME_MIN, MS5611_CONV_TIME_MAX);
-
+ usleep_range(osr->conv_usec, osr->conv_usec + (osr->conv_usec / 10UL));
ret = ms5611_spi_read_adc(dev, temp);
if (ret < 0)
return ret;
- cmd = MS5611_START_PRESSURE_CONV;
- ret = spi_write_then_read(st->client, &cmd, 1, NULL, 0);
+ osr = st->pressure_osr;
+ ret = spi_write_then_read(st->client, &osr->cmd, 1, NULL, 0);
if (ret < 0)
return ret;
- usleep_range(MS5611_CONV_TIME_MIN, MS5611_CONV_TIME_MAX);
-
+ usleep_range(osr->conv_usec, osr->conv_usec + (osr->conv_usec / 10UL));
return ms5611_spi_read_adc(dev, pressure);
}
@@ -106,7 +108,7 @@ static int ms5611_spi_probe(struct spi_device *spi)
st->client = spi;
return ms5611_probe(indio_dev, &spi->dev, spi_get_device_id(spi)->name,
- spi_get_device_id(spi)->driver_data);
+ spi_get_device_id(spi)->driver_data);
}
static int ms5611_spi_remove(struct spi_device *spi)
@@ -114,6 +116,17 @@ static int ms5611_spi_remove(struct spi_device *spi)
return ms5611_remove(spi_get_drvdata(spi));
}
+#if defined(CONFIG_OF)
+static const struct of_device_id ms5611_spi_matches[] = {
+ { .compatible = "meas,ms5611" },
+ { .compatible = "ms5611" },
+ { .compatible = "meas,ms5607" },
+ { .compatible = "ms5607" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ms5611_spi_matches);
+#endif
+
static const struct spi_device_id ms5611_id[] = {
{ "ms5611", MS5611 },
{ "ms5607", MS5607 },
@@ -124,6 +137,7 @@ MODULE_DEVICE_TABLE(spi, ms5611_id);
static struct spi_driver ms5611_driver = {
.driver = {
.name = "ms5611",
+ .of_match_table = of_match_ptr(ms5611_spi_matches)
},
.id_table = ms5611_id,
.probe = ms5611_spi_probe,
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index 172393ad34af..9e9b72a8f18f 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -64,6 +64,8 @@
#define ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK 0x20
#define ST_PRESS_LPS331AP_IHL_IRQ_ADDR 0x22
#define ST_PRESS_LPS331AP_IHL_IRQ_MASK 0x80
+#define ST_PRESS_LPS331AP_OD_IRQ_ADDR 0x22
+#define ST_PRESS_LPS331AP_OD_IRQ_MASK 0x40
#define ST_PRESS_LPS331AP_MULTIREAD_BIT true
#define ST_PRESS_LPS331AP_TEMP_OFFSET 42500
@@ -104,6 +106,8 @@
#define ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK 0x10
#define ST_PRESS_LPS25H_IHL_IRQ_ADDR 0x22
#define ST_PRESS_LPS25H_IHL_IRQ_MASK 0x80
+#define ST_PRESS_LPS25H_OD_IRQ_ADDR 0x22
+#define ST_PRESS_LPS25H_OD_IRQ_MASK 0x40
#define ST_PRESS_LPS25H_MULTIREAD_BIT true
#define ST_PRESS_LPS25H_TEMP_OFFSET 42500
#define ST_PRESS_LPS25H_OUT_XL_ADDR 0x28
@@ -226,6 +230,9 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
.mask_int2 = ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK,
.addr_ihl = ST_PRESS_LPS331AP_IHL_IRQ_ADDR,
.mask_ihl = ST_PRESS_LPS331AP_IHL_IRQ_MASK,
+ .addr_od = ST_PRESS_LPS331AP_OD_IRQ_ADDR,
+ .mask_od = ST_PRESS_LPS331AP_OD_IRQ_MASK,
+ .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
.multi_read_bit = ST_PRESS_LPS331AP_MULTIREAD_BIT,
.bootime = 2,
@@ -312,6 +319,9 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
.mask_int2 = ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK,
.addr_ihl = ST_PRESS_LPS25H_IHL_IRQ_ADDR,
.mask_ihl = ST_PRESS_LPS25H_IHL_IRQ_MASK,
+ .addr_od = ST_PRESS_LPS25H_OD_IRQ_ADDR,
+ .mask_od = ST_PRESS_LPS25H_OD_IRQ_MASK,
+ .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
.multi_read_bit = ST_PRESS_LPS25H_MULTIREAD_BIT,
.bootime = 2,
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-28 16:02:23 +0300