summaryrefslogtreecommitdiff
path: root/drivers/iio/adc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/adc')
-rw-r--r--drivers/iio/adc/Kconfig47
-rw-r--r--drivers/iio/adc/Makefile5
-rw-r--r--drivers/iio/adc/at91_adc.c33
-rw-r--r--drivers/iio/adc/exynos_adc.c6
-rw-r--r--drivers/iio/adc/max1363.c16
-rw-r--r--drivers/iio/adc/men_z188_adc.c172
-rw-r--r--drivers/iio/adc/ti_am335x_adc.c1
-rw-r--r--drivers/iio/adc/twl4030-madc.c895
-rw-r--r--drivers/iio/adc/twl6030-gpadc.c1
-rw-r--r--drivers/iio/adc/vf610_adc.c711
-rw-r--r--drivers/iio/adc/viperboard_adc.c2
-rw-r--r--drivers/iio/adc/xilinx-xadc-core.c1333
-rw-r--r--drivers/iio/adc/xilinx-xadc-events.c254
-rw-r--r--drivers/iio/adc/xilinx-xadc.h209
14 files changed, 3659 insertions, 26 deletions
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 2209f28441e9..24c28e3f93a3 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -106,7 +106,7 @@ config AT91_ADC
Say yes here to build support for Atmel AT91 ADC.
config EXYNOS_ADC
- bool "Exynos ADC driver support"
+ tristate "Exynos ADC driver support"
depends on OF
help
Core support for the ADC block found in the Samsung EXYNOS series
@@ -114,7 +114,7 @@ config EXYNOS_ADC
this resource.
config LP8788_ADC
- bool "LP8788 ADC driver"
+ tristate "LP8788 ADC driver"
depends on MFD_LP8788
help
Say yes here to build support for TI LP8788 ADC.
@@ -155,6 +155,16 @@ config MCP3422
This driver can also be built as a module. If so, the module will be
called mcp3422.
+config MEN_Z188_ADC
+ tristate "MEN 16z188 ADC IP Core support"
+ depends on MCB
+ help
+ Say yes here to enable support for the MEN 16z188 ADC IP-Core on a MCB
+ carrier.
+
+ This driver can also be built as a module. If so, the module will be
+ called men_z188_adc.
+
config NAU7802
tristate "Nuvoton NAU7802 ADC driver"
depends on I2C
@@ -183,6 +193,16 @@ config TI_AM335X_ADC
Say yes here to build support for Texas Instruments ADC
driver which is also a MFD client.
+config TWL4030_MADC
+ tristate "TWL4030 MADC (Monitoring A/D Converter)"
+ depends on TWL4030_CORE
+ help
+ This driver provides support for Triton TWL4030-MADC. The
+ driver supports both RT and SW conversion methods.
+
+ This driver can also be built as a module. If so, the module will be
+ called twl4030-madc.
+
config TWL6030_GPADC
tristate "TWL6030 GPADC (General Purpose A/D Converter) Support"
depends on TWL4030_CORE
@@ -197,6 +217,16 @@ config TWL6030_GPADC
This driver can also be built as a module. If so, the module will be
called twl6030-gpadc.
+config VF610_ADC
+ tristate "Freescale vf610 ADC driver"
+ depends on OF
+ help
+ Say yes here to support for Vybrid board analog-to-digital converter.
+ Since the IP is used for i.MX6SLX, the driver also support i.MX6SLX.
+
+ This driver can also be built as a module. If so, the module will be
+ called vf610_adc.
+
config VIPERBOARD_ADC
tristate "Viperboard ADC support"
depends on MFD_VIPERBOARD && USB
@@ -204,4 +234,17 @@ config VIPERBOARD_ADC
Say yes here to access the ADC part of the Nano River
Technologies Viperboard.
+config XILINX_XADC
+ tristate "Xilinx XADC driver"
+ depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST
+ depends on HAS_IOMEM
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say yes here to have support for the Xilinx XADC. The driver does support
+ both the ZYNQ interface to the XADC as well as the AXI-XADC interface.
+
+ The driver can also be build as a module. If so, the module will be called
+ xilinx-xadc.
+
endmenu
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index ba9a10a24cd0..ab346d88c688 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -17,8 +17,13 @@ obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
obj-$(CONFIG_MAX1363) += max1363.o
obj-$(CONFIG_MCP320X) += mcp320x.o
obj-$(CONFIG_MCP3422) += mcp3422.o
+obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
obj-$(CONFIG_NAU7802) += nau7802.o
obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
+obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o
obj-$(CONFIG_TWL6030_GPADC) += twl6030-gpadc.o
+obj-$(CONFIG_VF610_ADC) += vf610_adc.o
obj-$(CONFIG_VIPERBOARD_ADC) += viperboard_adc.o
+xilinx-xadc-y := xilinx-xadc-core.o xilinx-xadc-events.o
+obj-$(CONFIG_XILINX_XADC) += xilinx-xadc.o
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 5b1aa027c034..89777ed9abd8 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -765,14 +765,17 @@ static int at91_adc_probe_pdata(struct at91_adc_state *st,
if (!pdata)
return -EINVAL;
+ st->caps = (struct at91_adc_caps *)
+ platform_get_device_id(pdev)->driver_data;
+
st->use_external = pdata->use_external_triggers;
st->vref_mv = pdata->vref;
st->channels_mask = pdata->channels_used;
- st->num_channels = pdata->num_channels;
+ st->num_channels = st->caps->num_channels;
st->startup_time = pdata->startup_time;
st->trigger_number = pdata->trigger_number;
st->trigger_list = pdata->trigger_list;
- st->registers = pdata->registers;
+ st->registers = &st->caps->registers;
return 0;
}
@@ -1004,8 +1007,11 @@ static int at91_adc_probe(struct platform_device *pdev)
* the best converted final value between two channels selection
* The formula thus is : Sample and Hold Time = (shtim + 1) / ADCClock
*/
- shtim = round_up((st->sample_hold_time * adc_clk_khz /
- 1000) - 1, 1);
+ if (st->sample_hold_time > 0)
+ shtim = round_up((st->sample_hold_time * adc_clk_khz / 1000)
+ - 1, 1);
+ else
+ shtim = 0;
reg = AT91_ADC_PRESCAL_(prsc) & st->registers->mr_prescal_mask;
reg |= AT91_ADC_STARTUP_(ticks) & st->registers->mr_startup_mask;
@@ -1101,7 +1107,6 @@ static int at91_adc_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_OF
static struct at91_adc_caps at91sam9260_caps = {
.calc_startup_ticks = calc_startup_ticks_9260,
.num_channels = 4,
@@ -1154,11 +1159,27 @@ static const struct of_device_id at91_adc_dt_ids[] = {
{},
};
MODULE_DEVICE_TABLE(of, at91_adc_dt_ids);
-#endif
+
+static const struct platform_device_id at91_adc_ids[] = {
+ {
+ .name = "at91sam9260-adc",
+ .driver_data = (unsigned long)&at91sam9260_caps,
+ }, {
+ .name = "at91sam9g45-adc",
+ .driver_data = (unsigned long)&at91sam9g45_caps,
+ }, {
+ .name = "at91sam9x5-adc",
+ .driver_data = (unsigned long)&at91sam9x5_caps,
+ }, {
+ /* terminator */
+ }
+};
+MODULE_DEVICE_TABLE(platform, at91_adc_ids);
static struct platform_driver at91_adc_driver = {
.probe = at91_adc_probe,
.remove = at91_adc_remove,
+ .id_table = at91_adc_ids,
.driver = {
.name = DRIVER_NAME,
.of_match_table = of_match_ptr(at91_adc_dt_ids),
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index d25b262193a7..affa93f51789 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -344,7 +344,7 @@ static int exynos_adc_probe(struct platform_device *pdev)
exynos_adc_hw_init(info);
- ret = of_platform_populate(np, exynos_adc_match, NULL, &pdev->dev);
+ ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev);
if (ret < 0) {
dev_err(&pdev->dev, "failed adding child nodes\n");
goto err_of_populate;
@@ -353,7 +353,7 @@ static int exynos_adc_probe(struct platform_device *pdev)
return 0;
err_of_populate:
- device_for_each_child(&pdev->dev, NULL,
+ device_for_each_child(&indio_dev->dev, NULL,
exynos_adc_remove_devices);
regulator_disable(info->vdd);
clk_disable_unprepare(info->clk);
@@ -369,7 +369,7 @@ static int exynos_adc_remove(struct platform_device *pdev)
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct exynos_adc *info = iio_priv(indio_dev);
- device_for_each_child(&pdev->dev, NULL,
+ device_for_each_child(&indio_dev->dev, NULL,
exynos_adc_remove_devices);
regulator_disable(info->vdd);
clk_disable_unprepare(info->clk);
diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c
index 360259266d4f..9cf3229a7272 100644
--- a/drivers/iio/adc/max1363.c
+++ b/drivers/iio/adc/max1363.c
@@ -8,17 +8,11 @@
* based on linux/drivers/acron/char/pcf8583.c
* Copyright (C) 2000 Russell King
*
+ * Driver for max1363 and similar chips.
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * max1363.c
- *
- * Partial support for max1363 and similar chips.
- *
- * Not currently implemented.
- *
- * - Control of internal reference.
*/
#include <linux/interrupt.h>
@@ -1253,7 +1247,7 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
},
[max11604] = {
.bits = 8,
- .int_vref_mv = 4098,
+ .int_vref_mv = 4096,
.mode_list = max1238_mode_list,
.num_modes = ARRAY_SIZE(max1238_mode_list),
.default_mode = s0to11,
@@ -1313,7 +1307,7 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
},
[max11610] = {
.bits = 10,
- .int_vref_mv = 4098,
+ .int_vref_mv = 4096,
.mode_list = max1238_mode_list,
.num_modes = ARRAY_SIZE(max1238_mode_list),
.default_mode = s0to11,
@@ -1373,7 +1367,7 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
},
[max11616] = {
.bits = 12,
- .int_vref_mv = 4098,
+ .int_vref_mv = 4096,
.mode_list = max1238_mode_list,
.num_modes = ARRAY_SIZE(max1238_mode_list),
.default_mode = s0to11,
diff --git a/drivers/iio/adc/men_z188_adc.c b/drivers/iio/adc/men_z188_adc.c
new file mode 100644
index 000000000000..6989c16aec2b
--- /dev/null
+++ b/drivers/iio/adc/men_z188_adc.c
@@ -0,0 +1,172 @@
+/*
+ * MEN 16z188 Analog to Digial Converter
+ *
+ * Copyright (C) 2014 MEN Mikroelektronik GmbH (www.men.de)
+ * Author: Johannes Thumshirn <johannes.thumshirn@men.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mcb.h>
+#include <linux/io.h>
+#include <linux/iio/iio.h>
+
+#define Z188_ADC_MAX_CHAN 8
+#define Z188_ADC_GAIN 0x0700000
+#define Z188_MODE_VOLTAGE BIT(27)
+#define Z188_CFG_AUTO 0x1
+#define Z188_CTRL_REG 0x40
+
+#define ADC_DATA(x) (((x) >> 2) & 0x7ffffc)
+#define ADC_OVR(x) ((x) & 0x1)
+
+struct z188_adc {
+ struct resource *mem;
+ void __iomem *base;
+};
+
+#define Z188_ADC_CHANNEL(idx) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = (idx), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+}
+
+static const struct iio_chan_spec z188_adc_iio_channels[] = {
+ Z188_ADC_CHANNEL(0),
+ Z188_ADC_CHANNEL(1),
+ Z188_ADC_CHANNEL(2),
+ Z188_ADC_CHANNEL(3),
+ Z188_ADC_CHANNEL(4),
+ Z188_ADC_CHANNEL(5),
+ Z188_ADC_CHANNEL(6),
+ Z188_ADC_CHANNEL(7),
+};
+
+static int z188_iio_read_raw(struct iio_dev *iio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long info)
+{
+ struct z188_adc *adc = iio_priv(iio_dev);
+ int ret;
+ u16 tmp;
+
+ switch (info) {
+ case IIO_CHAN_INFO_RAW:
+ tmp = readw(adc->base + chan->channel * 4);
+
+ if (ADC_OVR(tmp)) {
+ dev_info(&iio_dev->dev,
+ "Oversampling error on ADC channel %d\n",
+ chan->channel);
+ return -EIO;
+ }
+ *val = ADC_DATA(tmp);
+ ret = IIO_VAL_INT;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static struct iio_info z188_adc_info = {
+ .read_raw = &z188_iio_read_raw,
+ .driver_module = THIS_MODULE,
+};
+
+static void men_z188_config_channels(void __iomem *addr)
+{
+ int i;
+ u32 cfg;
+ u32 ctl;
+
+ ctl = readl(addr + Z188_CTRL_REG);
+ ctl |= Z188_CFG_AUTO;
+ writel(ctl, addr + Z188_CTRL_REG);
+
+ for (i = 0; i < Z188_ADC_MAX_CHAN; i++) {
+ cfg = readl(addr + i);
+ cfg &= ~Z188_ADC_GAIN;
+ cfg |= Z188_MODE_VOLTAGE;
+ writel(cfg, addr + i);
+ }
+}
+
+static int men_z188_probe(struct mcb_device *dev,
+ const struct mcb_device_id *id)
+{
+ struct z188_adc *adc;
+ struct iio_dev *indio_dev;
+ struct resource *mem;
+
+ indio_dev = devm_iio_device_alloc(&dev->dev, sizeof(struct z188_adc));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ adc = iio_priv(indio_dev);
+ indio_dev->name = "z188-adc";
+ indio_dev->dev.parent = &dev->dev;
+ indio_dev->info = &z188_adc_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = z188_adc_iio_channels;
+ indio_dev->num_channels = ARRAY_SIZE(z188_adc_iio_channels);
+
+ mem = mcb_request_mem(dev, "z188-adc");
+ if (!mem)
+ return -ENOMEM;
+
+ adc->base = ioremap(mem->start, resource_size(mem));
+ if (adc->base == NULL)
+ goto err;
+
+ men_z188_config_channels(adc->base);
+
+ adc->mem = mem;
+ mcb_set_drvdata(dev, indio_dev);
+
+ return iio_device_register(indio_dev);
+
+err:
+ mcb_release_mem(mem);
+ return -ENXIO;
+}
+
+static void men_z188_remove(struct mcb_device *dev)
+{
+ struct iio_dev *indio_dev = mcb_get_drvdata(dev);
+ struct z188_adc *adc = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ iounmap(adc->base);
+ mcb_release_mem(adc->mem);
+}
+
+static const struct mcb_device_id men_z188_ids[] = {
+ { .device = 0xbc },
+};
+MODULE_DEVICE_TABLE(mcb, men_z188_ids);
+
+static struct mcb_driver men_z188_driver = {
+ .driver = {
+ .name = "z188-adc",
+ .owner = THIS_MODULE,
+ },
+ .probe = men_z188_probe,
+ .remove = men_z188_remove,
+ .id_table = men_z188_ids,
+};
+module_mcb_driver(men_z188_driver);
+
+MODULE_AUTHOR("Johannes Thumshirn <johannes.thumshirn@men.de>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("IIO ADC driver for MEN 16z188 ADC Core");
+MODULE_ALIAS("mcb:16z188");
diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index 31e786e3999b..a4db3026bec6 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -13,7 +13,6 @@
* GNU General Public License for more details.
*/
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/module.h>
diff --git a/drivers/iio/adc/twl4030-madc.c b/drivers/iio/adc/twl4030-madc.c
new file mode 100644
index 000000000000..7de1c4c87942
--- /dev/null
+++ b/drivers/iio/adc/twl4030-madc.c
@@ -0,0 +1,895 @@
+/*
+ *
+ * TWL4030 MADC module driver-This driver monitors the real time
+ * conversion of analog signals like battery temperature,
+ * battery type, battery level etc.
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * J Keerthy <j-keerthy@ti.com>
+ *
+ * Based on twl4030-madc.c
+ * Copyright (C) 2008 Nokia Corporation
+ * Mikko Ylinen <mikko.k.ylinen@nokia.com>
+ *
+ * Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/i2c/twl.h>
+#include <linux/i2c/twl4030-madc.h>
+#include <linux/module.h>
+#include <linux/stddef.h>
+#include <linux/mutex.h>
+#include <linux/bitops.h>
+#include <linux/jiffies.h>
+#include <linux/types.h>
+#include <linux/gfp.h>
+#include <linux/err.h>
+
+#include <linux/iio/iio.h>
+
+/**
+ * struct twl4030_madc_data - a container for madc info
+ * @dev: Pointer to device structure for madc
+ * @lock: Mutex protecting this data structure
+ * @requests: Array of request struct corresponding to SW1, SW2 and RT
+ * @use_second_irq: IRQ selection (main or co-processor)
+ * @imr: Interrupt mask register of MADC
+ * @isr: Interrupt status register of MADC
+ */
+struct twl4030_madc_data {
+ struct device *dev;
+ struct mutex lock; /* mutex protecting this data structure */
+ struct twl4030_madc_request requests[TWL4030_MADC_NUM_METHODS];
+ bool use_second_irq;
+ u8 imr;
+ u8 isr;
+};
+
+static int twl4030_madc_read(struct iio_dev *iio_dev,
+ const struct iio_chan_spec *chan,
+ int *val, int *val2, long mask)
+{
+ struct twl4030_madc_data *madc = iio_priv(iio_dev);
+ struct twl4030_madc_request req;
+ int ret;
+
+ req.method = madc->use_second_irq ? TWL4030_MADC_SW2 : TWL4030_MADC_SW1;
+
+ req.channels = BIT(chan->channel);
+ req.active = false;
+ req.func_cb = NULL;
+ req.type = TWL4030_MADC_WAIT;
+ req.raw = !(mask == IIO_CHAN_INFO_PROCESSED);
+ req.do_avg = (mask == IIO_CHAN_INFO_AVERAGE_RAW);
+
+ ret = twl4030_madc_conversion(&req);
+ if (ret < 0)
+ return ret;
+
+ *val = req.rbuf[chan->channel];
+
+ return IIO_VAL_INT;
+}
+
+static const struct iio_info twl4030_madc_iio_info = {
+ .read_raw = &twl4030_madc_read,
+ .driver_module = THIS_MODULE,
+};
+
+#define TWL4030_ADC_CHANNEL(_channel, _type, _name) { \
+ .type = _type, \
+ .channel = _channel, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_AVERAGE_RAW) | \
+ BIT(IIO_CHAN_INFO_PROCESSED), \
+ .datasheet_name = _name, \
+ .indexed = 1, \
+}
+
+static const struct iio_chan_spec twl4030_madc_iio_channels[] = {
+ TWL4030_ADC_CHANNEL(0, IIO_VOLTAGE, "ADCIN0"),
+ TWL4030_ADC_CHANNEL(1, IIO_TEMP, "ADCIN1"),
+ TWL4030_ADC_CHANNEL(2, IIO_VOLTAGE, "ADCIN2"),
+ TWL4030_ADC_CHANNEL(3, IIO_VOLTAGE, "ADCIN3"),
+ TWL4030_ADC_CHANNEL(4, IIO_VOLTAGE, "ADCIN4"),
+ TWL4030_ADC_CHANNEL(5, IIO_VOLTAGE, "ADCIN5"),
+ TWL4030_ADC_CHANNEL(6, IIO_VOLTAGE, "ADCIN6"),
+ TWL4030_ADC_CHANNEL(7, IIO_VOLTAGE, "ADCIN7"),
+ TWL4030_ADC_CHANNEL(8, IIO_VOLTAGE, "ADCIN8"),
+ TWL4030_ADC_CHANNEL(9, IIO_VOLTAGE, "ADCIN9"),
+ TWL4030_ADC_CHANNEL(10, IIO_CURRENT, "ADCIN10"),
+ TWL4030_ADC_CHANNEL(11, IIO_VOLTAGE, "ADCIN11"),
+ TWL4030_ADC_CHANNEL(12, IIO_VOLTAGE, "ADCIN12"),
+ TWL4030_ADC_CHANNEL(13, IIO_VOLTAGE, "ADCIN13"),
+ TWL4030_ADC_CHANNEL(14, IIO_VOLTAGE, "ADCIN14"),
+ TWL4030_ADC_CHANNEL(15, IIO_VOLTAGE, "ADCIN15"),
+};
+
+static struct twl4030_madc_data *twl4030_madc;
+
+struct twl4030_prescale_divider_ratios {
+ s16 numerator;
+ s16 denominator;
+};
+
+static const struct twl4030_prescale_divider_ratios
+twl4030_divider_ratios[16] = {
+ {1, 1}, /* CHANNEL 0 No Prescaler */
+ {1, 1}, /* CHANNEL 1 No Prescaler */
+ {6, 10}, /* CHANNEL 2 */
+ {6, 10}, /* CHANNEL 3 */
+ {6, 10}, /* CHANNEL 4 */
+ {6, 10}, /* CHANNEL 5 */
+ {6, 10}, /* CHANNEL 6 */
+ {6, 10}, /* CHANNEL 7 */
+ {3, 14}, /* CHANNEL 8 */
+ {1, 3}, /* CHANNEL 9 */
+ {1, 1}, /* CHANNEL 10 No Prescaler */
+ {15, 100}, /* CHANNEL 11 */
+ {1, 4}, /* CHANNEL 12 */
+ {1, 1}, /* CHANNEL 13 Reserved channels */
+ {1, 1}, /* CHANNEL 14 Reseved channels */
+ {5, 11}, /* CHANNEL 15 */
+};
+
+
+/* Conversion table from -3 to 55 degrees Celcius */
+static int twl4030_therm_tbl[] = {
+ 30800, 29500, 28300, 27100,
+ 26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700,
+ 17900, 17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100,
+ 12600, 12100, 11600, 11200, 10800, 10400, 10000, 9630, 9280,
+ 8950, 8620, 8310, 8020, 7730, 7460, 7200, 6950, 6710,
+ 6470, 6250, 6040, 5830, 5640, 5450, 5260, 5090, 4920,
+ 4760, 4600, 4450, 4310, 4170, 4040, 3910, 3790, 3670,
+ 3550
+};
+
+/*
+ * Structure containing the registers
+ * of different conversion methods supported by MADC.
+ * Hardware or RT real time conversion request initiated by external host
+ * processor for RT Signal conversions.
+ * External host processors can also request for non RT conversions
+ * SW1 and SW2 software conversions also called asynchronous or GPC request.
+ */
+static
+const struct twl4030_madc_conversion_method twl4030_conversion_methods[] = {
+ [TWL4030_MADC_RT] = {
+ .sel = TWL4030_MADC_RTSELECT_LSB,
+ .avg = TWL4030_MADC_RTAVERAGE_LSB,
+ .rbase = TWL4030_MADC_RTCH0_LSB,
+ },
+ [TWL4030_MADC_SW1] = {
+ .sel = TWL4030_MADC_SW1SELECT_LSB,
+ .avg = TWL4030_MADC_SW1AVERAGE_LSB,
+ .rbase = TWL4030_MADC_GPCH0_LSB,
+ .ctrl = TWL4030_MADC_CTRL_SW1,
+ },
+ [TWL4030_MADC_SW2] = {
+ .sel = TWL4030_MADC_SW2SELECT_LSB,
+ .avg = TWL4030_MADC_SW2AVERAGE_LSB,
+ .rbase = TWL4030_MADC_GPCH0_LSB,
+ .ctrl = TWL4030_MADC_CTRL_SW2,
+ },
+};
+
+/**
+ * twl4030_madc_channel_raw_read() - Function to read a particular channel value
+ * @madc: pointer to struct twl4030_madc_data
+ * @reg: lsb of ADC Channel
+ *
+ * Return: 0 on success, an error code otherwise.
+ */
+static int twl4030_madc_channel_raw_read(struct twl4030_madc_data *madc, u8 reg)
+{
+ u16 val;
+ int ret;
+ /*
+ * For each ADC channel, we have MSB and LSB register pair. MSB address
+ * is always LSB address+1. reg parameter is the address of LSB register
+ */
+ ret = twl_i2c_read_u16(TWL4030_MODULE_MADC, &val, reg);
+ if (ret) {
+ dev_err(madc->dev, "unable to read register 0x%X\n", reg);
+ return ret;
+ }
+
+ return (int)(val >> 6);
+}
+
+/*
+ * Return battery temperature in degrees Celsius
+ * Or < 0 on failure.
+ */
+static int twl4030battery_temperature(int raw_volt)
+{
+ u8 val;
+ int temp, curr, volt, res, ret;
+
+ volt = (raw_volt * TEMP_STEP_SIZE) / TEMP_PSR_R;
+ /* Getting and calculating the supply current in micro amperes */
+ ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE, &val,
+ REG_BCICTL2);
+ if (ret < 0)
+ return ret;
+
+ curr = ((val & TWL4030_BCI_ITHEN) + 1) * 10;
+ /* Getting and calculating the thermistor resistance in ohms */
+ res = volt * 1000 / curr;
+ /* calculating temperature */
+ for (temp = 58; temp >= 0; temp--) {
+ int actual = twl4030_therm_tbl[temp];
+ if ((actual - res) >= 0)
+ break;
+ }
+
+ return temp + 1;
+}
+
+static int twl4030battery_current(int raw_volt)
+{
+ int ret;
+ u8 val;
+
+ ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE, &val,
+ TWL4030_BCI_BCICTL1);
+ if (ret)
+ return ret;
+ if (val & TWL4030_BCI_CGAIN) /* slope of 0.44 mV/mA */
+ return (raw_volt * CURR_STEP_SIZE) / CURR_PSR_R1;
+ else /* slope of 0.88 mV/mA */
+ return (raw_volt * CURR_STEP_SIZE) / CURR_PSR_R2;
+}
+
+/*
+ * Function to read channel values
+ * @madc - pointer to twl4030_madc_data struct
+ * @reg_base - Base address of the first channel
+ * @Channels - 16 bit bitmap. If the bit is set, channel's value is read
+ * @buf - The channel values are stored here. if read fails error
+ * @raw - Return raw values without conversion
+ * value is stored
+ * Returns the number of successfully read channels.
+ */
+static int twl4030_madc_read_channels(struct twl4030_madc_data *madc,
+ u8 reg_base, unsigned
+ long channels, int *buf,
+ bool raw)
+{
+ int count = 0;
+ int i;
+ u8 reg;
+
+ for_each_set_bit(i, &channels, TWL4030_MADC_MAX_CHANNELS) {
+ reg = reg_base + (2 * i);
+ buf[i] = twl4030_madc_channel_raw_read(madc, reg);
+ if (buf[i] < 0) {
+ dev_err(madc->dev, "Unable to read register 0x%X\n",
+ reg);
+ return buf[i];
+ }
+ if (raw) {
+ count++;
+ continue;
+ }
+ switch (i) {
+ case 10:
+ buf[i] = twl4030battery_current(buf[i]);
+ if (buf[i] < 0) {
+ dev_err(madc->dev, "err reading current\n");
+ return buf[i];
+ } else {
+ count++;
+ buf[i] = buf[i] - 750;
+ }
+ break;
+ case 1:
+ buf[i] = twl4030battery_temperature(buf[i]);
+ if (buf[i] < 0) {
+ dev_err(madc->dev, "err reading temperature\n");
+ return buf[i];
+ } else {
+ buf[i] -= 3;
+ count++;
+ }
+ break;
+ default:
+ count++;
+ /* Analog Input (V) = conv_result * step_size / R
+ * conv_result = decimal value of 10-bit conversion
+ * result
+ * step size = 1.5 / (2 ^ 10 -1)
+ * R = Prescaler ratio for input channels.
+ * Result given in mV hence multiplied by 1000.
+ */
+ buf[i] = (buf[i] * 3 * 1000 *
+ twl4030_divider_ratios[i].denominator)
+ / (2 * 1023 *
+ twl4030_divider_ratios[i].numerator);
+ }
+ }
+
+ return count;
+}
+
+/*
+ * Enables irq.
+ * @madc - pointer to twl4030_madc_data struct
+ * @id - irq number to be enabled
+ * can take one of TWL4030_MADC_RT, TWL4030_MADC_SW1, TWL4030_MADC_SW2
+ * corresponding to RT, SW1, SW2 conversion requests.
+ * If the i2c read fails it returns an error else returns 0.
+ */
+static int twl4030_madc_enable_irq(struct twl4030_madc_data *madc, u8 id)
+{
+ u8 val;
+ int ret;
+
+ ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &val, madc->imr);
+ if (ret) {
+ dev_err(madc->dev, "unable to read imr register 0x%X\n",
+ madc->imr);
+ return ret;
+ }
+
+ val &= ~(1 << id);
+ ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, val, madc->imr);
+ if (ret) {
+ dev_err(madc->dev,
+ "unable to write imr register 0x%X\n", madc->imr);
+ return ret;
+ }
+
+ return 0;
+}
+
+/*
+ * Disables irq.
+ * @madc - pointer to twl4030_madc_data struct
+ * @id - irq number to be disabled
+ * can take one of TWL4030_MADC_RT, TWL4030_MADC_SW1, TWL4030_MADC_SW2
+ * corresponding to RT, SW1, SW2 conversion requests.
+ * Returns error if i2c read/write fails.
+ */
+static int twl4030_madc_disable_irq(struct twl4030_madc_data *madc, u8 id)
+{
+ u8 val;
+ int ret;
+
+ ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &val, madc->imr);
+ if (ret) {
+ dev_err(madc->dev, "unable to read imr register 0x%X\n",
+ madc->imr);
+ return ret;
+ }
+ val |= (1 << id);
+ ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, val, madc->imr);
+ if (ret) {
+ dev_err(madc->dev,
+ "unable to write imr register 0x%X\n", madc->imr);
+ return ret;
+ }
+
+ return 0;
+}
+
+static irqreturn_t twl4030_madc_threaded_irq_handler(int irq, void *_madc)
+{
+ struct twl4030_madc_data *madc = _madc;
+ const struct twl4030_madc_conversion_method *method;
+ u8 isr_val, imr_val;
+ int i, len, ret;
+ struct twl4030_madc_request *r;
+
+ mutex_lock(&madc->lock);
+ ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &isr_val, madc->isr);
+ if (ret) {
+ dev_err(madc->dev, "unable to read isr register 0x%X\n",
+ madc->isr);
+ goto err_i2c;
+ }
+ ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &imr_val, madc->imr);
+ if (ret) {
+ dev_err(madc->dev, "unable to read imr register 0x%X\n",
+ madc->imr);
+ goto err_i2c;
+ }
+ isr_val &= ~imr_val;
+ for (i = 0; i < TWL4030_MADC_NUM_METHODS; i++) {
+ if (!(isr_val & (1 << i)))
+ continue;
+ ret = twl4030_madc_disable_irq(madc, i);
+ if (ret < 0)
+ dev_dbg(madc->dev, "Disable interrupt failed %d\n", i);
+ madc->requests[i].result_pending = 1;
+ }
+ for (i = 0; i < TWL4030_MADC_NUM_METHODS; i++) {
+ r = &madc->requests[i];
+ /* No pending results for this method, move to next one */
+ if (!r->result_pending)
+ continue;
+ method = &twl4030_conversion_methods[r->method];
+ /* Read results */
+ len = twl4030_madc_read_channels(madc, method->rbase,
+ r->channels, r->rbuf, r->raw);
+ /* Return results to caller */
+ if (r->func_cb != NULL) {
+ r->func_cb(len, r->channels, r->rbuf);
+ r->func_cb = NULL;
+ }
+ /* Free request */
+ r->result_pending = 0;
+ r->active = 0;
+ }
+ mutex_unlock(&madc->lock);
+
+ return IRQ_HANDLED;
+
+err_i2c:
+ /*
+ * In case of error check whichever request is active
+ * and service the same.
+ */
+ for (i = 0; i < TWL4030_MADC_NUM_METHODS; i++) {
+ r = &madc->requests[i];
+ if (r->active == 0)
+ continue;
+ method = &twl4030_conversion_methods[r->method];
+ /* Read results */
+ len = twl4030_madc_read_channels(madc, method->rbase,
+ r->channels, r->rbuf, r->raw);
+ /* Return results to caller */
+ if (r->func_cb != NULL) {
+ r->func_cb(len, r->channels, r->rbuf);
+ r->func_cb = NULL;
+ }
+ /* Free request */
+ r->result_pending = 0;
+ r->active = 0;
+ }
+ mutex_unlock(&madc->lock);
+
+ return IRQ_HANDLED;
+}
+
+static int twl4030_madc_set_irq(struct twl4030_madc_data *madc,
+ struct twl4030_madc_request *req)
+{
+ struct twl4030_madc_request *p;
+ int ret;
+
+ p = &madc->requests[req->method];
+ memcpy(p, req, sizeof(*req));
+ ret = twl4030_madc_enable_irq(madc, req->method);
+ if (ret < 0) {
+ dev_err(madc->dev, "enable irq failed!!\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+/*
+ * Function which enables the madc conversion
+ * by writing to the control register.
+ * @madc - pointer to twl4030_madc_data struct
+ * @conv_method - can be TWL4030_MADC_RT, TWL4030_MADC_SW2, TWL4030_MADC_SW1
+ * corresponding to RT SW1 or SW2 conversion methods.
+ * Returns 0 if succeeds else a negative error value
+ */
+static int twl4030_madc_start_conversion(struct twl4030_madc_data *madc,
+ int conv_method)
+{
+ const struct twl4030_madc_conversion_method *method;
+ int ret = 0;
+
+ if (conv_method != TWL4030_MADC_SW1 && conv_method != TWL4030_MADC_SW2)
+ return -ENOTSUPP;
+
+ method = &twl4030_conversion_methods[conv_method];
+ ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, TWL4030_MADC_SW_START,
+ method->ctrl);
+ if (ret) {
+ dev_err(madc->dev, "unable to write ctrl register 0x%X\n",
+ method->ctrl);
+ return ret;
+ }
+
+ return 0;
+}
+
+/*
+ * Function that waits for conversion to be ready
+ * @madc - pointer to twl4030_madc_data struct
+ * @timeout_ms - timeout value in milliseconds
+ * @status_reg - ctrl register
+ * returns 0 if succeeds else a negative error value
+ */
+static int twl4030_madc_wait_conversion_ready(struct twl4030_madc_data *madc,
+ unsigned int timeout_ms,
+ u8 status_reg)
+{
+ unsigned long timeout;
+ int ret;
+
+ timeout = jiffies + msecs_to_jiffies(timeout_ms);
+ do {
+ u8 reg;
+
+ ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &reg, status_reg);
+ if (ret) {
+ dev_err(madc->dev,
+ "unable to read status register 0x%X\n",
+ status_reg);
+ return ret;
+ }
+ if (!(reg & TWL4030_MADC_BUSY) && (reg & TWL4030_MADC_EOC_SW))
+ return 0;
+ usleep_range(500, 2000);
+ } while (!time_after(jiffies, timeout));
+ dev_err(madc->dev, "conversion timeout!\n");
+
+ return -EAGAIN;
+}
+
+/*
+ * An exported function which can be called from other kernel drivers.
+ * @req twl4030_madc_request structure
+ * req->rbuf will be filled with read values of channels based on the
+ * channel index. If a particular channel reading fails there will
+ * be a negative error value in the corresponding array element.
+ * returns 0 if succeeds else error value
+ */
+int twl4030_madc_conversion(struct twl4030_madc_request *req)
+{
+ const struct twl4030_madc_conversion_method *method;
+ int ret;
+
+ if (!req || !twl4030_madc)
+ return -EINVAL;
+
+ mutex_lock(&twl4030_madc->lock);
+ if (req->method < TWL4030_MADC_RT || req->method > TWL4030_MADC_SW2) {
+ ret = -EINVAL;
+ goto out;
+ }
+ /* Do we have a conversion request ongoing */
+ if (twl4030_madc->requests[req->method].active) {
+ ret = -EBUSY;
+ goto out;
+ }
+ method = &twl4030_conversion_methods[req->method];
+ /* Select channels to be converted */
+ ret = twl_i2c_write_u16(TWL4030_MODULE_MADC, req->channels, method->sel);
+ if (ret) {
+ dev_err(twl4030_madc->dev,
+ "unable to write sel register 0x%X\n", method->sel);
+ goto out;
+ }
+ /* Select averaging for all channels if do_avg is set */
+ if (req->do_avg) {
+ ret = twl_i2c_write_u16(TWL4030_MODULE_MADC, req->channels,
+ method->avg);
+ if (ret) {
+ dev_err(twl4030_madc->dev,
+ "unable to write avg register 0x%X\n",
+ method->avg);
+ goto out;
+ }
+ }
+ if (req->type == TWL4030_MADC_IRQ_ONESHOT && req->func_cb != NULL) {
+ ret = twl4030_madc_set_irq(twl4030_madc, req);
+ if (ret < 0)
+ goto out;
+ ret = twl4030_madc_start_conversion(twl4030_madc, req->method);
+ if (ret < 0)
+ goto out;
+ twl4030_madc->requests[req->method].active = 1;
+ ret = 0;
+ goto out;
+ }
+ /* With RT method we should not be here anymore */
+ if (req->method == TWL4030_MADC_RT) {
+ ret = -EINVAL;
+ goto out;
+ }
+ ret = twl4030_madc_start_conversion(twl4030_madc, req->method);
+ if (ret < 0)
+ goto out;
+ twl4030_madc->requests[req->method].active = 1;
+ /* Wait until conversion is ready (ctrl register returns EOC) */
+ ret = twl4030_madc_wait_conversion_ready(twl4030_madc, 5, method->ctrl);
+ if (ret) {
+ twl4030_madc->requests[req->method].active = 0;
+ goto out;
+ }
+ ret = twl4030_madc_read_channels(twl4030_madc, method->rbase,
+ req->channels, req->rbuf, req->raw);
+ twl4030_madc->requests[req->method].active = 0;
+
+out:
+ mutex_unlock(&twl4030_madc->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(twl4030_madc_conversion);
+
+int twl4030_get_madc_conversion(int channel_no)
+{
+ struct twl4030_madc_request req;
+ int temp = 0;
+ int ret;
+
+ req.channels = (1 << channel_no);
+ req.method = TWL4030_MADC_SW2;
+ req.active = 0;
+ req.func_cb = NULL;
+ ret = twl4030_madc_conversion(&req);
+ if (ret < 0)
+ return ret;
+ if (req.rbuf[channel_no] > 0)
+ temp = req.rbuf[channel_no];
+
+ return temp;
+}
+EXPORT_SYMBOL_GPL(twl4030_get_madc_conversion);
+
+/**
+ * twl4030_madc_set_current_generator() - setup bias current
+ *
+ * @madc: pointer to twl4030_madc_data struct
+ * @chan: can be one of the two values:
+ * TWL4030_BCI_ITHEN
+ * Enables bias current for main battery type reading
+ * TWL4030_BCI_TYPEN
+ * Enables bias current for main battery temperature sensing
+ * @on: enable or disable chan.
+ *
+ * Function to enable or disable bias current for
+ * main battery type reading or temperature sensing
+ */
+static int twl4030_madc_set_current_generator(struct twl4030_madc_data *madc,
+ int chan, int on)
+{
+ int ret;
+ int regmask;
+ u8 regval;
+
+ ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE,
+ &regval, TWL4030_BCI_BCICTL1);
+ if (ret) {
+ dev_err(madc->dev, "unable to read BCICTL1 reg 0x%X",
+ TWL4030_BCI_BCICTL1);
+ return ret;
+ }
+
+ regmask = chan ? TWL4030_BCI_ITHEN : TWL4030_BCI_TYPEN;
+ if (on)
+ regval |= regmask;
+ else
+ regval &= ~regmask;
+
+ ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
+ regval, TWL4030_BCI_BCICTL1);
+ if (ret) {
+ dev_err(madc->dev, "unable to write BCICTL1 reg 0x%X\n",
+ TWL4030_BCI_BCICTL1);
+ return ret;
+ }
+
+ return 0;
+}
+
+/*
+ * Function that sets MADC software power on bit to enable MADC
+ * @madc - pointer to twl4030_madc_data struct
+ * @on - Enable or disable MADC software power on bit.
+ * returns error if i2c read/write fails else 0
+ */
+static int twl4030_madc_set_power(struct twl4030_madc_data *madc, int on)
+{
+ u8 regval;
+ int ret;
+
+ ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE,
+ &regval, TWL4030_MADC_CTRL1);
+ if (ret) {
+ dev_err(madc->dev, "unable to read madc ctrl1 reg 0x%X\n",
+ TWL4030_MADC_CTRL1);
+ return ret;
+ }
+ if (on)
+ regval |= TWL4030_MADC_MADCON;
+ else
+ regval &= ~TWL4030_MADC_MADCON;
+ ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, regval, TWL4030_MADC_CTRL1);
+ if (ret) {
+ dev_err(madc->dev, "unable to write madc ctrl1 reg 0x%X\n",
+ TWL4030_MADC_CTRL1);
+ return ret;
+ }
+
+ return 0;
+}
+
+/*
+ * Initialize MADC and request for threaded irq
+ */
+static int twl4030_madc_probe(struct platform_device *pdev)
+{
+ struct twl4030_madc_data *madc;
+ struct twl4030_madc_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct device_node *np = pdev->dev.of_node;
+ int irq, ret;
+ u8 regval;
+ struct iio_dev *iio_dev = NULL;
+
+ if (!pdata && !np) {
+ dev_err(&pdev->dev, "neither platform data nor Device Tree node available\n");
+ return -EINVAL;
+ }
+
+ iio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*madc));
+ if (!iio_dev) {
+ dev_err(&pdev->dev, "failed allocating iio device\n");
+ return -ENOMEM;
+ }
+
+ madc = iio_priv(iio_dev);
+ madc->dev = &pdev->dev;
+
+ iio_dev->name = dev_name(&pdev->dev);
+ iio_dev->dev.parent = &pdev->dev;
+ iio_dev->dev.of_node = pdev->dev.of_node;
+ iio_dev->info = &twl4030_madc_iio_info;
+ iio_dev->modes = INDIO_DIRECT_MODE;
+ iio_dev->channels = twl4030_madc_iio_channels;
+ iio_dev->num_channels = ARRAY_SIZE(twl4030_madc_iio_channels);
+
+ /*
+ * Phoenix provides 2 interrupt lines. The first one is connected to
+ * the OMAP. The other one can be connected to the other processor such
+ * as modem. Hence two separate ISR and IMR registers.
+ */
+ if (pdata)
+ madc->use_second_irq = (pdata->irq_line != 1);
+ else
+ madc->use_second_irq = of_property_read_bool(np,
+ "ti,system-uses-second-madc-irq");
+
+ madc->imr = madc->use_second_irq ? TWL4030_MADC_IMR2 :
+ TWL4030_MADC_IMR1;
+ madc->isr = madc->use_second_irq ? TWL4030_MADC_ISR2 :
+ TWL4030_MADC_ISR1;
+
+ ret = twl4030_madc_set_power(madc, 1);
+ if (ret < 0)
+ return ret;
+ ret = twl4030_madc_set_current_generator(madc, 0, 1);
+ if (ret < 0)
+ goto err_current_generator;
+
+ ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE,
+ &regval, TWL4030_BCI_BCICTL1);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to read reg BCI CTL1 0x%X\n",
+ TWL4030_BCI_BCICTL1);
+ goto err_i2c;
+ }
+ regval |= TWL4030_BCI_MESBAT;
+ ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
+ regval, TWL4030_BCI_BCICTL1);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to write reg BCI Ctl1 0x%X\n",
+ TWL4030_BCI_BCICTL1);
+ goto err_i2c;
+ }
+
+ /* Check that MADC clock is on */
+ ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &regval, TWL4030_REG_GPBR1);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to read reg GPBR1 0x%X\n",
+ TWL4030_REG_GPBR1);
+ goto err_i2c;
+ }
+
+ /* If MADC clk is not on, turn it on */
+ if (!(regval & TWL4030_GPBR1_MADC_HFCLK_EN)) {
+ dev_info(&pdev->dev, "clk disabled, enabling\n");
+ regval |= TWL4030_GPBR1_MADC_HFCLK_EN;
+ ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, regval,
+ TWL4030_REG_GPBR1);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to write reg GPBR1 0x%X\n",
+ TWL4030_REG_GPBR1);
+ goto err_i2c;
+ }
+ }
+
+ platform_set_drvdata(pdev, iio_dev);
+ mutex_init(&madc->lock);
+
+ irq = platform_get_irq(pdev, 0);
+ ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ twl4030_madc_threaded_irq_handler,
+ IRQF_TRIGGER_RISING, "twl4030_madc", madc);
+ if (ret) {
+ dev_err(&pdev->dev, "could not request irq\n");
+ goto err_i2c;
+ }
+ twl4030_madc = madc;
+
+ ret = iio_device_register(iio_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "could not register iio device\n");
+ goto err_i2c;
+ }
+
+ return 0;
+
+err_i2c:
+ twl4030_madc_set_current_generator(madc, 0, 0);
+err_current_generator:
+ twl4030_madc_set_power(madc, 0);
+ return ret;
+}
+
+static int twl4030_madc_remove(struct platform_device *pdev)
+{
+ struct iio_dev *iio_dev = platform_get_drvdata(pdev);
+ struct twl4030_madc_data *madc = iio_priv(iio_dev);
+
+ iio_device_unregister(iio_dev);
+
+ twl4030_madc_set_current_generator(madc, 0, 0);
+ twl4030_madc_set_power(madc, 0);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id twl_madc_of_match[] = {
+ { .compatible = "ti,twl4030-madc", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, twl_madc_of_match);
+#endif
+
+static struct platform_driver twl4030_madc_driver = {
+ .probe = twl4030_madc_probe,
+ .remove = twl4030_madc_remove,
+ .driver = {
+ .name = "twl4030_madc",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(twl_madc_of_match),
+ },
+};
+
+module_platform_driver(twl4030_madc_driver);
+
+MODULE_DESCRIPTION("TWL4030 ADC driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("J Keerthy");
+MODULE_ALIAS("platform:twl4030_madc");
diff --git a/drivers/iio/adc/twl6030-gpadc.c b/drivers/iio/adc/twl6030-gpadc.c
index 53a24ebb92c3..15282f148b3b 100644
--- a/drivers/iio/adc/twl6030-gpadc.c
+++ b/drivers/iio/adc/twl6030-gpadc.c
@@ -28,7 +28,6 @@
* 02110-1301 USA
*
*/
-#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
diff --git a/drivers/iio/adc/vf610_adc.c b/drivers/iio/adc/vf610_adc.c
new file mode 100644
index 000000000000..44799eb5930e
--- /dev/null
+++ b/drivers/iio/adc/vf610_adc.c
@@ -0,0 +1,711 @@
+/*
+ * Freescale Vybrid vf610 ADC driver
+ *
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of_platform.h>
+#include <linux/err.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/driver.h>
+
+/* This will be the driver name the kernel reports */
+#define DRIVER_NAME "vf610-adc"
+
+/* Vybrid/IMX ADC registers */
+#define VF610_REG_ADC_HC0 0x00
+#define VF610_REG_ADC_HC1 0x04
+#define VF610_REG_ADC_HS 0x08
+#define VF610_REG_ADC_R0 0x0c
+#define VF610_REG_ADC_R1 0x10
+#define VF610_REG_ADC_CFG 0x14
+#define VF610_REG_ADC_GC 0x18
+#define VF610_REG_ADC_GS 0x1c
+#define VF610_REG_ADC_CV 0x20
+#define VF610_REG_ADC_OFS 0x24
+#define VF610_REG_ADC_CAL 0x28
+#define VF610_REG_ADC_PCTL 0x30
+
+/* Configuration register field define */
+#define VF610_ADC_MODE_BIT8 0x00
+#define VF610_ADC_MODE_BIT10 0x04
+#define VF610_ADC_MODE_BIT12 0x08
+#define VF610_ADC_MODE_MASK 0x0c
+#define VF610_ADC_BUSCLK2_SEL 0x01
+#define VF610_ADC_ALTCLK_SEL 0x02
+#define VF610_ADC_ADACK_SEL 0x03
+#define VF610_ADC_ADCCLK_MASK 0x03
+#define VF610_ADC_CLK_DIV2 0x20
+#define VF610_ADC_CLK_DIV4 0x40
+#define VF610_ADC_CLK_DIV8 0x60
+#define VF610_ADC_CLK_MASK 0x60
+#define VF610_ADC_ADLSMP_LONG 0x10
+#define VF610_ADC_ADSTS_MASK 0x300
+#define VF610_ADC_ADLPC_EN 0x80
+#define VF610_ADC_ADHSC_EN 0x400
+#define VF610_ADC_REFSEL_VALT 0x100
+#define VF610_ADC_REFSEL_VBG 0x1000
+#define VF610_ADC_ADTRG_HARD 0x2000
+#define VF610_ADC_AVGS_8 0x4000
+#define VF610_ADC_AVGS_16 0x8000
+#define VF610_ADC_AVGS_32 0xC000
+#define VF610_ADC_AVGS_MASK 0xC000
+#define VF610_ADC_OVWREN 0x10000
+
+/* General control register field define */
+#define VF610_ADC_ADACKEN 0x1
+#define VF610_ADC_DMAEN 0x2
+#define VF610_ADC_ACREN 0x4
+#define VF610_ADC_ACFGT 0x8
+#define VF610_ADC_ACFE 0x10
+#define VF610_ADC_AVGEN 0x20
+#define VF610_ADC_ADCON 0x40
+#define VF610_ADC_CAL 0x80
+
+/* Other field define */
+#define VF610_ADC_ADCHC(x) ((x) & 0xF)
+#define VF610_ADC_AIEN (0x1 << 7)
+#define VF610_ADC_CONV_DISABLE 0x1F
+#define VF610_ADC_HS_COCO0 0x1
+#define VF610_ADC_CALF 0x2
+#define VF610_ADC_TIMEOUT msecs_to_jiffies(100)
+
+enum clk_sel {
+ VF610_ADCIOC_BUSCLK_SET,
+ VF610_ADCIOC_ALTCLK_SET,
+ VF610_ADCIOC_ADACK_SET,
+};
+
+enum vol_ref {
+ VF610_ADCIOC_VR_VREF_SET,
+ VF610_ADCIOC_VR_VALT_SET,
+ VF610_ADCIOC_VR_VBG_SET,
+};
+
+enum average_sel {
+ VF610_ADC_SAMPLE_1,
+ VF610_ADC_SAMPLE_4,
+ VF610_ADC_SAMPLE_8,
+ VF610_ADC_SAMPLE_16,
+ VF610_ADC_SAMPLE_32,
+};
+
+struct vf610_adc_feature {
+ enum clk_sel clk_sel;
+ enum vol_ref vol_ref;
+
+ int clk_div;
+ int sample_rate;
+ int res_mode;
+
+ bool lpm;
+ bool calibration;
+ bool ovwren;
+};
+
+struct vf610_adc {
+ struct device *dev;
+ void __iomem *regs;
+ struct clk *clk;
+
+ u32 vref_uv;
+ u32 value;
+ struct regulator *vref;
+ struct vf610_adc_feature adc_feature;
+
+ struct completion completion;
+};
+
+#define VF610_ADC_CHAN(_idx, _chan_type) { \
+ .type = (_chan_type), \
+ .indexed = 1, \
+ .channel = (_idx), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+}
+
+static const struct iio_chan_spec vf610_adc_iio_channels[] = {
+ VF610_ADC_CHAN(0, IIO_VOLTAGE),
+ VF610_ADC_CHAN(1, IIO_VOLTAGE),
+ VF610_ADC_CHAN(2, IIO_VOLTAGE),
+ VF610_ADC_CHAN(3, IIO_VOLTAGE),
+ VF610_ADC_CHAN(4, IIO_VOLTAGE),
+ VF610_ADC_CHAN(5, IIO_VOLTAGE),
+ VF610_ADC_CHAN(6, IIO_VOLTAGE),
+ VF610_ADC_CHAN(7, IIO_VOLTAGE),
+ VF610_ADC_CHAN(8, IIO_VOLTAGE),
+ VF610_ADC_CHAN(9, IIO_VOLTAGE),
+ VF610_ADC_CHAN(10, IIO_VOLTAGE),
+ VF610_ADC_CHAN(11, IIO_VOLTAGE),
+ VF610_ADC_CHAN(12, IIO_VOLTAGE),
+ VF610_ADC_CHAN(13, IIO_VOLTAGE),
+ VF610_ADC_CHAN(14, IIO_VOLTAGE),
+ VF610_ADC_CHAN(15, IIO_VOLTAGE),
+ /* sentinel */
+};
+
+/*
+ * ADC sample frequency, unit is ADCK cycles.
+ * ADC clk source is ipg clock, which is the same as bus clock.
+ *
+ * ADC conversion time = SFCAdder + AverageNum x (BCT + LSTAdder)
+ * SFCAdder: fixed to 6 ADCK cycles
+ * AverageNum: 1, 4, 8, 16, 32 samples for hardware average.
+ * BCT (Base Conversion Time): fixed to 25 ADCK cycles for 12 bit mode
+ * LSTAdder(Long Sample Time): fixed to 3 ADCK cycles
+ *
+ * By default, enable 12 bit resolution mode, clock source
+ * set to ipg clock, So get below frequency group:
+ */
+static const u32 vf610_sample_freq_avail[5] =
+{1941176, 559332, 286957, 145374, 73171};
+
+static inline void vf610_adc_cfg_init(struct vf610_adc *info)
+{
+ /* set default Configuration for ADC controller */
+ info->adc_feature.clk_sel = VF610_ADCIOC_BUSCLK_SET;
+ info->adc_feature.vol_ref = VF610_ADCIOC_VR_VREF_SET;
+
+ info->adc_feature.calibration = true;
+ info->adc_feature.ovwren = true;
+
+ info->adc_feature.clk_div = 1;
+ info->adc_feature.res_mode = 12;
+ info->adc_feature.sample_rate = 1;
+ info->adc_feature.lpm = true;
+}
+
+static void vf610_adc_cfg_post_set(struct vf610_adc *info)
+{
+ struct vf610_adc_feature *adc_feature = &info->adc_feature;
+ int cfg_data = 0;
+ int gc_data = 0;
+
+ switch (adc_feature->clk_sel) {
+ case VF610_ADCIOC_ALTCLK_SET:
+ cfg_data |= VF610_ADC_ALTCLK_SEL;
+ break;
+ case VF610_ADCIOC_ADACK_SET:
+ cfg_data |= VF610_ADC_ADACK_SEL;
+ break;
+ default:
+ break;
+ }
+
+ /* low power set for calibration */
+ cfg_data |= VF610_ADC_ADLPC_EN;
+
+ /* enable high speed for calibration */
+ cfg_data |= VF610_ADC_ADHSC_EN;
+
+ /* voltage reference */
+ switch (adc_feature->vol_ref) {
+ case VF610_ADCIOC_VR_VREF_SET:
+ break;
+ case VF610_ADCIOC_VR_VALT_SET:
+ cfg_data |= VF610_ADC_REFSEL_VALT;
+ break;
+ case VF610_ADCIOC_VR_VBG_SET:
+ cfg_data |= VF610_ADC_REFSEL_VBG;
+ break;
+ default:
+ dev_err(info->dev, "error voltage reference\n");
+ }
+
+ /* data overwrite enable */
+ if (adc_feature->ovwren)
+ cfg_data |= VF610_ADC_OVWREN;
+
+ writel(cfg_data, info->regs + VF610_REG_ADC_CFG);
+ writel(gc_data, info->regs + VF610_REG_ADC_GC);
+}
+
+static void vf610_adc_calibration(struct vf610_adc *info)
+{
+ int adc_gc, hc_cfg;
+ int timeout;
+
+ if (!info->adc_feature.calibration)
+ return;
+
+ /* enable calibration interrupt */
+ hc_cfg = VF610_ADC_AIEN | VF610_ADC_CONV_DISABLE;
+ writel(hc_cfg, info->regs + VF610_REG_ADC_HC0);
+
+ adc_gc = readl(info->regs + VF610_REG_ADC_GC);
+ writel(adc_gc | VF610_ADC_CAL, info->regs + VF610_REG_ADC_GC);
+
+ timeout = wait_for_completion_timeout
+ (&info->completion, VF610_ADC_TIMEOUT);
+ if (timeout == 0)
+ dev_err(info->dev, "Timeout for adc calibration\n");
+
+ adc_gc = readl(info->regs + VF610_REG_ADC_GS);
+ if (adc_gc & VF610_ADC_CALF)
+ dev_err(info->dev, "ADC calibration failed\n");
+
+ info->adc_feature.calibration = false;
+}
+
+static void vf610_adc_cfg_set(struct vf610_adc *info)
+{
+ struct vf610_adc_feature *adc_feature = &(info->adc_feature);
+ int cfg_data;
+
+ cfg_data = readl(info->regs + VF610_REG_ADC_CFG);
+
+ /* low power configuration */
+ cfg_data &= ~VF610_ADC_ADLPC_EN;
+ if (adc_feature->lpm)
+ cfg_data |= VF610_ADC_ADLPC_EN;
+
+ /* disable high speed */
+ cfg_data &= ~VF610_ADC_ADHSC_EN;
+
+ writel(cfg_data, info->regs + VF610_REG_ADC_CFG);
+}
+
+static void vf610_adc_sample_set(struct vf610_adc *info)
+{
+ struct vf610_adc_feature *adc_feature = &(info->adc_feature);
+ int cfg_data, gc_data;
+
+ cfg_data = readl(info->regs + VF610_REG_ADC_CFG);
+ gc_data = readl(info->regs + VF610_REG_ADC_GC);
+
+ /* resolution mode */
+ cfg_data &= ~VF610_ADC_MODE_MASK;
+ switch (adc_feature->res_mode) {
+ case 8:
+ cfg_data |= VF610_ADC_MODE_BIT8;
+ break;
+ case 10:
+ cfg_data |= VF610_ADC_MODE_BIT10;
+ break;
+ case 12:
+ cfg_data |= VF610_ADC_MODE_BIT12;
+ break;
+ default:
+ dev_err(info->dev, "error resolution mode\n");
+ break;
+ }
+
+ /* clock select and clock divider */
+ cfg_data &= ~(VF610_ADC_CLK_MASK | VF610_ADC_ADCCLK_MASK);
+ switch (adc_feature->clk_div) {
+ case 1:
+ break;
+ case 2:
+ cfg_data |= VF610_ADC_CLK_DIV2;
+ break;
+ case 4:
+ cfg_data |= VF610_ADC_CLK_DIV4;
+ break;
+ case 8:
+ cfg_data |= VF610_ADC_CLK_DIV8;
+ break;
+ case 16:
+ switch (adc_feature->clk_sel) {
+ case VF610_ADCIOC_BUSCLK_SET:
+ cfg_data |= VF610_ADC_BUSCLK2_SEL | VF610_ADC_CLK_DIV8;
+ break;
+ default:
+ dev_err(info->dev, "error clk divider\n");
+ break;
+ }
+ break;
+ }
+
+ /* Use the short sample mode */
+ cfg_data &= ~(VF610_ADC_ADLSMP_LONG | VF610_ADC_ADSTS_MASK);
+
+ /* update hardware average selection */
+ cfg_data &= ~VF610_ADC_AVGS_MASK;
+ gc_data &= ~VF610_ADC_AVGEN;
+ switch (adc_feature->sample_rate) {
+ case VF610_ADC_SAMPLE_1:
+ break;
+ case VF610_ADC_SAMPLE_4:
+ gc_data |= VF610_ADC_AVGEN;
+ break;
+ case VF610_ADC_SAMPLE_8:
+ gc_data |= VF610_ADC_AVGEN;
+ cfg_data |= VF610_ADC_AVGS_8;
+ break;
+ case VF610_ADC_SAMPLE_16:
+ gc_data |= VF610_ADC_AVGEN;
+ cfg_data |= VF610_ADC_AVGS_16;
+ break;
+ case VF610_ADC_SAMPLE_32:
+ gc_data |= VF610_ADC_AVGEN;
+ cfg_data |= VF610_ADC_AVGS_32;
+ break;
+ default:
+ dev_err(info->dev,
+ "error hardware sample average select\n");
+ }
+
+ writel(cfg_data, info->regs + VF610_REG_ADC_CFG);
+ writel(gc_data, info->regs + VF610_REG_ADC_GC);
+}
+
+static void vf610_adc_hw_init(struct vf610_adc *info)
+{
+ /* CFG: Feature set */
+ vf610_adc_cfg_post_set(info);
+ vf610_adc_sample_set(info);
+
+ /* adc calibration */
+ vf610_adc_calibration(info);
+
+ /* CFG: power and speed set */
+ vf610_adc_cfg_set(info);
+}
+
+static int vf610_adc_read_data(struct vf610_adc *info)
+{
+ int result;
+
+ result = readl(info->regs + VF610_REG_ADC_R0);
+
+ switch (info->adc_feature.res_mode) {
+ case 8:
+ result &= 0xFF;
+ break;
+ case 10:
+ result &= 0x3FF;
+ break;
+ case 12:
+ result &= 0xFFF;
+ break;
+ default:
+ break;
+ }
+
+ return result;
+}
+
+static irqreturn_t vf610_adc_isr(int irq, void *dev_id)
+{
+ struct vf610_adc *info = (struct vf610_adc *)dev_id;
+ int coco;
+
+ coco = readl(info->regs + VF610_REG_ADC_HS);
+ if (coco & VF610_ADC_HS_COCO0) {
+ info->value = vf610_adc_read_data(info);
+ complete(&info->completion);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("1941176, 559332, 286957, 145374, 73171");
+
+static struct attribute *vf610_attributes[] = {
+ &iio_const_attr_sampling_frequency_available.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group vf610_attribute_group = {
+ .attrs = vf610_attributes,
+};
+
+static int vf610_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long mask)
+{
+ struct vf610_adc *info = iio_priv(indio_dev);
+ unsigned int hc_cfg;
+ long ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&indio_dev->mlock);
+ reinit_completion(&info->completion);
+
+ hc_cfg = VF610_ADC_ADCHC(chan->channel);
+ hc_cfg |= VF610_ADC_AIEN;
+ writel(hc_cfg, info->regs + VF610_REG_ADC_HC0);
+ ret = wait_for_completion_interruptible_timeout
+ (&info->completion, VF610_ADC_TIMEOUT);
+ if (ret == 0) {
+ mutex_unlock(&indio_dev->mlock);
+ return -ETIMEDOUT;
+ }
+ if (ret < 0) {
+ mutex_unlock(&indio_dev->mlock);
+ return ret;
+ }
+
+ *val = info->value;
+ mutex_unlock(&indio_dev->mlock);
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_SCALE:
+ *val = info->vref_uv / 1000;
+ *val2 = info->adc_feature.res_mode;
+ return IIO_VAL_FRACTIONAL_LOG2;
+
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *val = vf610_sample_freq_avail[info->adc_feature.sample_rate];
+ *val2 = 0;
+ return IIO_VAL_INT;
+
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+
+static int vf610_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val,
+ int val2,
+ long mask)
+{
+ struct vf610_adc *info = iio_priv(indio_dev);
+ int i;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ for (i = 0;
+ i < ARRAY_SIZE(vf610_sample_freq_avail);
+ i++)
+ if (val == vf610_sample_freq_avail[i]) {
+ info->adc_feature.sample_rate = i;
+ vf610_adc_sample_set(info);
+ return 0;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+
+static int vf610_adc_reg_access(struct iio_dev *indio_dev,
+ unsigned reg, unsigned writeval,
+ unsigned *readval)
+{
+ struct vf610_adc *info = iio_priv(indio_dev);
+
+ if ((readval == NULL) ||
+ (!(reg % 4) || (reg > VF610_REG_ADC_PCTL)))
+ return -EINVAL;
+
+ *readval = readl(info->regs + reg);
+
+ return 0;
+}
+
+static const struct iio_info vf610_adc_iio_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = &vf610_read_raw,
+ .write_raw = &vf610_write_raw,
+ .debugfs_reg_access = &vf610_adc_reg_access,
+ .attrs = &vf610_attribute_group,
+};
+
+static const struct of_device_id vf610_adc_match[] = {
+ { .compatible = "fsl,vf610-adc", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, vf610_adc_match);
+
+static int vf610_adc_probe(struct platform_device *pdev)
+{
+ struct vf610_adc *info;
+ struct iio_dev *indio_dev;
+ struct resource *mem;
+ int irq;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct vf610_adc));
+ if (!indio_dev) {
+ dev_err(&pdev->dev, "Failed allocating iio device\n");
+ return -ENOMEM;
+ }
+
+ info = iio_priv(indio_dev);
+ info->dev = &pdev->dev;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ info->regs = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(info->regs))
+ return PTR_ERR(info->regs);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ dev_err(&pdev->dev, "no irq resource?\n");
+ return -EINVAL;
+ }
+
+ ret = devm_request_irq(info->dev, irq,
+ vf610_adc_isr, 0,
+ dev_name(&pdev->dev), info);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed requesting irq, irq = %d\n", irq);
+ return ret;
+ }
+
+ info->clk = devm_clk_get(&pdev->dev, "adc");
+ if (IS_ERR(info->clk)) {
+ dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
+ PTR_ERR(info->clk));
+ ret = PTR_ERR(info->clk);
+ return ret;
+ }
+
+ info->vref = devm_regulator_get(&pdev->dev, "vref");
+ if (IS_ERR(info->vref))
+ return PTR_ERR(info->vref);
+
+ ret = regulator_enable(info->vref);
+ if (ret)
+ return ret;
+
+ info->vref_uv = regulator_get_voltage(info->vref);
+
+ platform_set_drvdata(pdev, indio_dev);
+
+ init_completion(&info->completion);
+
+ indio_dev->name = dev_name(&pdev->dev);
+ indio_dev->dev.parent = &pdev->dev;
+ indio_dev->dev.of_node = pdev->dev.of_node;
+ indio_dev->info = &vf610_adc_iio_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = vf610_adc_iio_channels;
+ indio_dev->num_channels = ARRAY_SIZE(vf610_adc_iio_channels);
+
+ ret = clk_prepare_enable(info->clk);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Could not prepare or enable the clock.\n");
+ goto error_adc_clk_enable;
+ }
+
+ vf610_adc_cfg_init(info);
+ vf610_adc_hw_init(info);
+
+ ret = iio_device_register(indio_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Couldn't register the device.\n");
+ goto error_iio_device_register;
+ }
+
+ return 0;
+
+
+error_iio_device_register:
+ clk_disable_unprepare(info->clk);
+error_adc_clk_enable:
+ regulator_disable(info->vref);
+
+ return ret;
+}
+
+static int vf610_adc_remove(struct platform_device *pdev)
+{
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct vf610_adc *info = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ regulator_disable(info->vref);
+ clk_disable_unprepare(info->clk);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int vf610_adc_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct vf610_adc *info = iio_priv(indio_dev);
+ int hc_cfg;
+
+ /* ADC controller enters to stop mode */
+ hc_cfg = readl(info->regs + VF610_REG_ADC_HC0);
+ hc_cfg |= VF610_ADC_CONV_DISABLE;
+ writel(hc_cfg, info->regs + VF610_REG_ADC_HC0);
+
+ clk_disable_unprepare(info->clk);
+ regulator_disable(info->vref);
+
+ return 0;
+}
+
+static int vf610_adc_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct vf610_adc *info = iio_priv(indio_dev);
+ int ret;
+
+ ret = regulator_enable(info->vref);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(info->clk);
+ if (ret)
+ return ret;
+
+ vf610_adc_hw_init(info);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(vf610_adc_pm_ops,
+ vf610_adc_suspend,
+ vf610_adc_resume);
+
+static struct platform_driver vf610_adc_driver = {
+ .probe = vf610_adc_probe,
+ .remove = vf610_adc_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = vf610_adc_match,
+ .pm = &vf610_adc_pm_ops,
+ },
+};
+
+module_platform_driver(vf610_adc_driver);
+
+MODULE_AUTHOR("Fugang Duan <B38611@freescale.com>");
+MODULE_DESCRIPTION("Freescale VF610 ADC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/viperboard_adc.c b/drivers/iio/adc/viperboard_adc.c
index d0add8f9416b..9acf6b6d705b 100644
--- a/drivers/iio/adc/viperboard_adc.c
+++ b/drivers/iio/adc/viperboard_adc.c
@@ -139,8 +139,6 @@ static int vprbrd_adc_probe(struct platform_device *pdev)
return ret;
}
- platform_set_drvdata(pdev, indio_dev);
-
return 0;
}
diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
new file mode 100644
index 000000000000..ab52be29141b
--- /dev/null
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -0,0 +1,1333 @@
+/*
+ * Xilinx XADC driver
+ *
+ * Copyright 2013-2014 Analog Devices Inc.
+ * Author: Lars-Peter Clauen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2.
+ *
+ * Documentation for the parts can be found at:
+ * - XADC hardmacro: Xilinx UG480
+ * - ZYNQ XADC interface: Xilinx UG585
+ * - AXI XADC interface: Xilinx PG019
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include "xilinx-xadc.h"
+
+static const unsigned int XADC_ZYNQ_UNMASK_TIMEOUT = 500;
+
+/* ZYNQ register definitions */
+#define XADC_ZYNQ_REG_CFG 0x00
+#define XADC_ZYNQ_REG_INTSTS 0x04
+#define XADC_ZYNQ_REG_INTMSK 0x08
+#define XADC_ZYNQ_REG_STATUS 0x0c
+#define XADC_ZYNQ_REG_CFIFO 0x10
+#define XADC_ZYNQ_REG_DFIFO 0x14
+#define XADC_ZYNQ_REG_CTL 0x18
+
+#define XADC_ZYNQ_CFG_ENABLE BIT(31)
+#define XADC_ZYNQ_CFG_CFIFOTH_MASK (0xf << 20)
+#define XADC_ZYNQ_CFG_CFIFOTH_OFFSET 20
+#define XADC_ZYNQ_CFG_DFIFOTH_MASK (0xf << 16)
+#define XADC_ZYNQ_CFG_DFIFOTH_OFFSET 16
+#define XADC_ZYNQ_CFG_WEDGE BIT(13)
+#define XADC_ZYNQ_CFG_REDGE BIT(12)
+#define XADC_ZYNQ_CFG_TCKRATE_MASK (0x3 << 8)
+#define XADC_ZYNQ_CFG_TCKRATE_DIV2 (0x0 << 8)
+#define XADC_ZYNQ_CFG_TCKRATE_DIV4 (0x1 << 8)
+#define XADC_ZYNQ_CFG_TCKRATE_DIV8 (0x2 << 8)
+#define XADC_ZYNQ_CFG_TCKRATE_DIV16 (0x3 << 8)
+#define XADC_ZYNQ_CFG_IGAP_MASK 0x1f
+#define XADC_ZYNQ_CFG_IGAP(x) (x)
+
+#define XADC_ZYNQ_INT_CFIFO_LTH BIT(9)
+#define XADC_ZYNQ_INT_DFIFO_GTH BIT(8)
+#define XADC_ZYNQ_INT_ALARM_MASK 0xff
+#define XADC_ZYNQ_INT_ALARM_OFFSET 0
+
+#define XADC_ZYNQ_STATUS_CFIFO_LVL_MASK (0xf << 16)
+#define XADC_ZYNQ_STATUS_CFIFO_LVL_OFFSET 16
+#define XADC_ZYNQ_STATUS_DFIFO_LVL_MASK (0xf << 12)
+#define XADC_ZYNQ_STATUS_DFIFO_LVL_OFFSET 12
+#define XADC_ZYNQ_STATUS_CFIFOF BIT(11)
+#define XADC_ZYNQ_STATUS_CFIFOE BIT(10)
+#define XADC_ZYNQ_STATUS_DFIFOF BIT(9)
+#define XADC_ZYNQ_STATUS_DFIFOE BIT(8)
+#define XADC_ZYNQ_STATUS_OT BIT(7)
+#define XADC_ZYNQ_STATUS_ALM(x) BIT(x)
+
+#define XADC_ZYNQ_CTL_RESET BIT(4)
+
+#define XADC_ZYNQ_CMD_NOP 0x00
+#define XADC_ZYNQ_CMD_READ 0x01
+#define XADC_ZYNQ_CMD_WRITE 0x02
+
+#define XADC_ZYNQ_CMD(cmd, addr, data) (((cmd) << 26) | ((addr) << 16) | (data))
+
+/* AXI register definitions */
+#define XADC_AXI_REG_RESET 0x00
+#define XADC_AXI_REG_STATUS 0x04
+#define XADC_AXI_REG_ALARM_STATUS 0x08
+#define XADC_AXI_REG_CONVST 0x0c
+#define XADC_AXI_REG_XADC_RESET 0x10
+#define XADC_AXI_REG_GIER 0x5c
+#define XADC_AXI_REG_IPISR 0x60
+#define XADC_AXI_REG_IPIER 0x68
+#define XADC_AXI_ADC_REG_OFFSET 0x200
+
+#define XADC_AXI_RESET_MAGIC 0xa
+#define XADC_AXI_GIER_ENABLE BIT(31)
+
+#define XADC_AXI_INT_EOS BIT(4)
+#define XADC_AXI_INT_ALARM_MASK 0x3c0f
+
+#define XADC_FLAGS_BUFFERED BIT(0)
+
+static void xadc_write_reg(struct xadc *xadc, unsigned int reg,
+ uint32_t val)
+{
+ writel(val, xadc->base + reg);
+}
+
+static void xadc_read_reg(struct xadc *xadc, unsigned int reg,
+ uint32_t *val)
+{
+ *val = readl(xadc->base + reg);
+}
+
+/*
+ * The ZYNQ interface uses two asynchronous FIFOs for communication with the
+ * XADC. Reads and writes to the XADC register are performed by submitting a
+ * request to the command FIFO (CFIFO), once the request has been completed the
+ * result can be read from the data FIFO (DFIFO). The method currently used in
+ * this driver is to submit the request for a read/write operation, then go to
+ * sleep and wait for an interrupt that signals that a response is available in
+ * the data FIFO.
+ */
+
+static void xadc_zynq_write_fifo(struct xadc *xadc, uint32_t *cmd,
+ unsigned int n)
+{
+ unsigned int i;
+
+ for (i = 0; i < n; i++)
+ xadc_write_reg(xadc, XADC_ZYNQ_REG_CFIFO, cmd[i]);
+}
+
+static void xadc_zynq_drain_fifo(struct xadc *xadc)
+{
+ uint32_t status, tmp;
+
+ xadc_read_reg(xadc, XADC_ZYNQ_REG_STATUS, &status);
+
+ while (!(status & XADC_ZYNQ_STATUS_DFIFOE)) {
+ xadc_read_reg(xadc, XADC_ZYNQ_REG_DFIFO, &tmp);
+ xadc_read_reg(xadc, XADC_ZYNQ_REG_STATUS, &status);
+ }
+}
+
+static void xadc_zynq_update_intmsk(struct xadc *xadc, unsigned int mask,
+ unsigned int val)
+{
+ xadc->zynq_intmask &= ~mask;
+ xadc->zynq_intmask |= val;
+
+ xadc_write_reg(xadc, XADC_ZYNQ_REG_INTMSK,
+ xadc->zynq_intmask | xadc->zynq_masked_alarm);
+}
+
+static int xadc_zynq_write_adc_reg(struct xadc *xadc, unsigned int reg,
+ uint16_t val)
+{
+ uint32_t cmd[1];
+ uint32_t tmp;
+ int ret;
+
+ spin_lock_irq(&xadc->lock);
+ xadc_zynq_update_intmsk(xadc, XADC_ZYNQ_INT_DFIFO_GTH,
+ XADC_ZYNQ_INT_DFIFO_GTH);
+
+ reinit_completion(&xadc->completion);
+
+ cmd[0] = XADC_ZYNQ_CMD(XADC_ZYNQ_CMD_WRITE, reg, val);
+ xadc_zynq_write_fifo(xadc, cmd, ARRAY_SIZE(cmd));
+ xadc_read_reg(xadc, XADC_ZYNQ_REG_CFG, &tmp);
+ tmp &= ~XADC_ZYNQ_CFG_DFIFOTH_MASK;
+ tmp |= 0 << XADC_ZYNQ_CFG_DFIFOTH_OFFSET;
+ xadc_write_reg(xadc, XADC_ZYNQ_REG_CFG, tmp);
+
+ xadc_zynq_update_intmsk(xadc, XADC_ZYNQ_INT_DFIFO_GTH, 0);
+ spin_unlock_irq(&xadc->lock);
+
+ ret = wait_for_completion_interruptible_timeout(&xadc->completion, HZ);
+ if (ret == 0)
+ ret = -EIO;
+ else
+ ret = 0;
+
+ xadc_read_reg(xadc, XADC_ZYNQ_REG_DFIFO, &tmp);
+
+ return ret;
+}
+
+static int xadc_zynq_read_adc_reg(struct xadc *xadc, unsigned int reg,
+ uint16_t *val)
+{
+ uint32_t cmd[2];
+ uint32_t resp, tmp;
+ int ret;
+
+ cmd[0] = XADC_ZYNQ_CMD(XADC_ZYNQ_CMD_READ, reg, 0);
+ cmd[1] = XADC_ZYNQ_CMD(XADC_ZYNQ_CMD_NOP, 0, 0);
+
+ spin_lock_irq(&xadc->lock);
+ xadc_zynq_update_intmsk(xadc, XADC_ZYNQ_INT_DFIFO_GTH,
+ XADC_ZYNQ_INT_DFIFO_GTH);
+ xadc_zynq_drain_fifo(xadc);
+ reinit_completion(&xadc->completion);
+
+ xadc_zynq_write_fifo(xadc, cmd, ARRAY_SIZE(cmd));
+ xadc_read_reg(xadc, XADC_ZYNQ_REG_CFG, &tmp);
+ tmp &= ~XADC_ZYNQ_CFG_DFIFOTH_MASK;
+ tmp |= 1 << XADC_ZYNQ_CFG_DFIFOTH_OFFSET;
+ xadc_write_reg(xadc, XADC_ZYNQ_REG_CFG, tmp);
+
+ xadc_zynq_update_intmsk(xadc, XADC_ZYNQ_INT_DFIFO_GTH, 0);
+ spin_unlock_irq(&xadc->lock);
+ ret = wait_for_completion_interruptible_timeout(&xadc->completion, HZ);
+ if (ret == 0)
+ ret = -EIO;
+ if (ret < 0)
+ return ret;
+
+ xadc_read_reg(xadc, XADC_ZYNQ_REG_DFIFO, &resp);
+ xadc_read_reg(xadc, XADC_ZYNQ_REG_DFIFO, &resp);
+
+ *val = resp & 0xffff;
+
+ return 0;
+}
+
+static unsigned int xadc_zynq_transform_alarm(unsigned int alarm)
+{
+ return ((alarm & 0x80) >> 4) |
+ ((alarm & 0x78) << 1) |
+ (alarm & 0x07);
+}
+
+/*
+ * The ZYNQ threshold interrupts are level sensitive. Since we can't make the
+ * threshold condition go way from within the interrupt handler, this means as
+ * soon as a threshold condition is present we would enter the interrupt handler
+ * again and again. To work around this we mask all active thresholds interrupts
+ * in the interrupt handler and start a timer. In this timer we poll the
+ * interrupt status and only if the interrupt is inactive we unmask it again.
+ */
+static void xadc_zynq_unmask_worker(struct work_struct *work)
+{
+ struct xadc *xadc = container_of(work, struct xadc, zynq_unmask_work.work);
+ unsigned int misc_sts, unmask;
+
+ xadc_read_reg(xadc, XADC_ZYNQ_REG_STATUS, &misc_sts);
+
+ misc_sts &= XADC_ZYNQ_INT_ALARM_MASK;
+
+ spin_lock_irq(&xadc->lock);
+
+ /* Clear those bits which are not active anymore */
+ unmask = (xadc->zynq_masked_alarm ^ misc_sts) & xadc->zynq_masked_alarm;
+ xadc->zynq_masked_alarm &= misc_sts;
+
+ /* Also clear those which are masked out anyway */
+ xadc->zynq_masked_alarm &= ~xadc->zynq_intmask;
+
+ /* Clear the interrupts before we unmask them */
+ xadc_write_reg(xadc, XADC_ZYNQ_REG_INTSTS, unmask);
+
+ xadc_zynq_update_intmsk(xadc, 0, 0);
+
+ spin_unlock_irq(&xadc->lock);
+
+ /* if still pending some alarm re-trigger the timer */
+ if (xadc->zynq_masked_alarm) {
+ schedule_delayed_work(&xadc->zynq_unmask_work,
+ msecs_to_jiffies(XADC_ZYNQ_UNMASK_TIMEOUT));
+ }
+}
+
+static irqreturn_t xadc_zynq_threaded_interrupt_handler(int irq, void *devid)
+{
+ struct iio_dev *indio_dev = devid;
+ struct xadc *xadc = iio_priv(indio_dev);
+ unsigned int alarm;
+
+ spin_lock_irq(&xadc->lock);
+ alarm = xadc->zynq_alarm;
+ xadc->zynq_alarm = 0;
+ spin_unlock_irq(&xadc->lock);
+
+ xadc_handle_events(indio_dev, xadc_zynq_transform_alarm(alarm));
+
+ /* unmask the required interrupts in timer. */
+ schedule_delayed_work(&xadc->zynq_unmask_work,
+ msecs_to_jiffies(XADC_ZYNQ_UNMASK_TIMEOUT));
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t xadc_zynq_interrupt_handler(int irq, void *devid)
+{
+ struct iio_dev *indio_dev = devid;
+ struct xadc *xadc = iio_priv(indio_dev);
+ irqreturn_t ret = IRQ_HANDLED;
+ uint32_t status;
+
+ xadc_read_reg(xadc, XADC_ZYNQ_REG_INTSTS, &status);
+
+ status &= ~(xadc->zynq_intmask | xadc->zynq_masked_alarm);
+
+ if (!status)
+ return IRQ_NONE;
+
+ spin_lock(&xadc->lock);
+
+ xadc_write_reg(xadc, XADC_ZYNQ_REG_INTSTS, status);
+
+ if (status & XADC_ZYNQ_INT_DFIFO_GTH) {
+ xadc_zynq_update_intmsk(xadc, XADC_ZYNQ_INT_DFIFO_GTH,
+ XADC_ZYNQ_INT_DFIFO_GTH);
+ complete(&xadc->completion);
+ }
+
+ status &= XADC_ZYNQ_INT_ALARM_MASK;
+ if (status) {
+ xadc->zynq_alarm |= status;
+ xadc->zynq_masked_alarm |= status;
+ /*
+ * mask the current event interrupt,
+ * unmask it when the interrupt is no more active.
+ */
+ xadc_zynq_update_intmsk(xadc, 0, 0);
+ ret = IRQ_WAKE_THREAD;
+ }
+ spin_unlock(&xadc->lock);
+
+ return ret;
+}
+
+#define XADC_ZYNQ_TCK_RATE_MAX 50000000
+#define XADC_ZYNQ_IGAP_DEFAULT 20
+
+static int xadc_zynq_setup(struct platform_device *pdev,
+ struct iio_dev *indio_dev, int irq)
+{
+ struct xadc *xadc = iio_priv(indio_dev);
+ unsigned long pcap_rate;
+ unsigned int tck_div;
+ unsigned int div;
+ unsigned int igap;
+ unsigned int tck_rate;
+
+ /* TODO: Figure out how to make igap and tck_rate configurable */
+ igap = XADC_ZYNQ_IGAP_DEFAULT;
+ tck_rate = XADC_ZYNQ_TCK_RATE_MAX;
+
+ xadc->zynq_intmask = ~0;
+
+ pcap_rate = clk_get_rate(xadc->clk);
+
+ if (tck_rate > XADC_ZYNQ_TCK_RATE_MAX)
+ tck_rate = XADC_ZYNQ_TCK_RATE_MAX;
+ if (tck_rate > pcap_rate / 2) {
+ div = 2;
+ } else {
+ div = pcap_rate / tck_rate;
+ if (pcap_rate / div > XADC_ZYNQ_TCK_RATE_MAX)
+ div++;
+ }
+
+ if (div <= 3)
+ tck_div = XADC_ZYNQ_CFG_TCKRATE_DIV2;
+ else if (div <= 7)
+ tck_div = XADC_ZYNQ_CFG_TCKRATE_DIV4;
+ else if (div <= 15)
+ tck_div = XADC_ZYNQ_CFG_TCKRATE_DIV8;
+ else
+ tck_div = XADC_ZYNQ_CFG_TCKRATE_DIV16;
+
+ xadc_write_reg(xadc, XADC_ZYNQ_REG_CTL, XADC_ZYNQ_CTL_RESET);
+ xadc_write_reg(xadc, XADC_ZYNQ_REG_CTL, 0);
+ xadc_write_reg(xadc, XADC_ZYNQ_REG_INTSTS, ~0);
+ xadc_write_reg(xadc, XADC_ZYNQ_REG_INTMSK, xadc->zynq_intmask);
+ xadc_write_reg(xadc, XADC_ZYNQ_REG_CFG, XADC_ZYNQ_CFG_ENABLE |
+ XADC_ZYNQ_CFG_REDGE | XADC_ZYNQ_CFG_WEDGE |
+ tck_div | XADC_ZYNQ_CFG_IGAP(igap));
+
+ return 0;
+}
+
+static unsigned long xadc_zynq_get_dclk_rate(struct xadc *xadc)
+{
+ unsigned int div;
+ uint32_t val;
+
+ xadc_read_reg(xadc, XADC_ZYNQ_REG_CFG, &val);
+
+ switch (val & XADC_ZYNQ_CFG_TCKRATE_MASK) {
+ case XADC_ZYNQ_CFG_TCKRATE_DIV4:
+ div = 4;
+ break;
+ case XADC_ZYNQ_CFG_TCKRATE_DIV8:
+ div = 8;
+ break;
+ case XADC_ZYNQ_CFG_TCKRATE_DIV16:
+ div = 16;
+ break;
+ default:
+ div = 2;
+ break;
+ }
+
+ return clk_get_rate(xadc->clk) / div;
+}
+
+static void xadc_zynq_update_alarm(struct xadc *xadc, unsigned int alarm)
+{
+ unsigned long flags;
+ uint32_t status;
+
+ /* Move OT to bit 7 */
+ alarm = ((alarm & 0x08) << 4) | ((alarm & 0xf0) >> 1) | (alarm & 0x07);
+
+ spin_lock_irqsave(&xadc->lock, flags);
+
+ /* Clear previous interrupts if any. */
+ xadc_read_reg(xadc, XADC_ZYNQ_REG_INTSTS, &status);
+ xadc_write_reg(xadc, XADC_ZYNQ_REG_INTSTS, status & alarm);
+
+ xadc_zynq_update_intmsk(xadc, XADC_ZYNQ_INT_ALARM_MASK,
+ ~alarm & XADC_ZYNQ_INT_ALARM_MASK);
+
+ spin_unlock_irqrestore(&xadc->lock, flags);
+}
+
+static const struct xadc_ops xadc_zynq_ops = {
+ .read = xadc_zynq_read_adc_reg,
+ .write = xadc_zynq_write_adc_reg,
+ .setup = xadc_zynq_setup,
+ .get_dclk_rate = xadc_zynq_get_dclk_rate,
+ .interrupt_handler = xadc_zynq_interrupt_handler,
+ .threaded_interrupt_handler = xadc_zynq_threaded_interrupt_handler,
+ .update_alarm = xadc_zynq_update_alarm,
+};
+
+static int xadc_axi_read_adc_reg(struct xadc *xadc, unsigned int reg,
+ uint16_t *val)
+{
+ uint32_t val32;
+
+ xadc_read_reg(xadc, XADC_AXI_ADC_REG_OFFSET + reg * 4, &val32);
+ *val = val32 & 0xffff;
+
+ return 0;
+}
+
+static int xadc_axi_write_adc_reg(struct xadc *xadc, unsigned int reg,
+ uint16_t val)
+{
+ xadc_write_reg(xadc, XADC_AXI_ADC_REG_OFFSET + reg * 4, val);
+
+ return 0;
+}
+
+static int xadc_axi_setup(struct platform_device *pdev,
+ struct iio_dev *indio_dev, int irq)
+{
+ struct xadc *xadc = iio_priv(indio_dev);
+
+ xadc_write_reg(xadc, XADC_AXI_REG_RESET, XADC_AXI_RESET_MAGIC);
+ xadc_write_reg(xadc, XADC_AXI_REG_GIER, XADC_AXI_GIER_ENABLE);
+
+ return 0;
+}
+
+static irqreturn_t xadc_axi_interrupt_handler(int irq, void *devid)
+{
+ struct iio_dev *indio_dev = devid;
+ struct xadc *xadc = iio_priv(indio_dev);
+ uint32_t status, mask;
+ unsigned int events;
+
+ xadc_read_reg(xadc, XADC_AXI_REG_IPISR, &status);
+ xadc_read_reg(xadc, XADC_AXI_REG_IPIER, &mask);
+ status &= mask;
+
+ if (!status)
+ return IRQ_NONE;
+
+ if ((status & XADC_AXI_INT_EOS) && xadc->trigger)
+ iio_trigger_poll(xadc->trigger, 0);
+
+ if (status & XADC_AXI_INT_ALARM_MASK) {
+ /*
+ * The order of the bits in the AXI-XADC status register does
+ * not match the order of the bits in the XADC alarm enable
+ * register. xadc_handle_events() expects the events to be in
+ * the same order as the XADC alarm enable register.
+ */
+ events = (status & 0x000e) >> 1;
+ events |= (status & 0x0001) << 3;
+ events |= (status & 0x3c00) >> 6;
+ xadc_handle_events(indio_dev, events);
+ }
+
+ xadc_write_reg(xadc, XADC_AXI_REG_IPISR, status);
+
+ return IRQ_HANDLED;
+}
+
+static void xadc_axi_update_alarm(struct xadc *xadc, unsigned int alarm)
+{
+ uint32_t val;
+ unsigned long flags;
+
+ /*
+ * The order of the bits in the AXI-XADC status register does not match
+ * the order of the bits in the XADC alarm enable register. We get
+ * passed the alarm mask in the same order as in the XADC alarm enable
+ * register.
+ */
+ alarm = ((alarm & 0x07) << 1) | ((alarm & 0x08) >> 3) |
+ ((alarm & 0xf0) << 6);
+
+ spin_lock_irqsave(&xadc->lock, flags);
+ xadc_read_reg(xadc, XADC_AXI_REG_IPIER, &val);
+ val &= ~XADC_AXI_INT_ALARM_MASK;
+ val |= alarm;
+ xadc_write_reg(xadc, XADC_AXI_REG_IPIER, val);
+ spin_unlock_irqrestore(&xadc->lock, flags);
+}
+
+static unsigned long xadc_axi_get_dclk(struct xadc *xadc)
+{
+ return clk_get_rate(xadc->clk);
+}
+
+static const struct xadc_ops xadc_axi_ops = {
+ .read = xadc_axi_read_adc_reg,
+ .write = xadc_axi_write_adc_reg,
+ .setup = xadc_axi_setup,
+ .get_dclk_rate = xadc_axi_get_dclk,
+ .update_alarm = xadc_axi_update_alarm,
+ .interrupt_handler = xadc_axi_interrupt_handler,
+ .flags = XADC_FLAGS_BUFFERED,
+};
+
+static int _xadc_update_adc_reg(struct xadc *xadc, unsigned int reg,
+ uint16_t mask, uint16_t val)
+{
+ uint16_t tmp;
+ int ret;
+
+ ret = _xadc_read_adc_reg(xadc, reg, &tmp);
+ if (ret)
+ return ret;
+
+ return _xadc_write_adc_reg(xadc, reg, (tmp & ~mask) | val);
+}
+
+static int xadc_update_adc_reg(struct xadc *xadc, unsigned int reg,
+ uint16_t mask, uint16_t val)
+{
+ int ret;
+
+ mutex_lock(&xadc->mutex);
+ ret = _xadc_update_adc_reg(xadc, reg, mask, val);
+ mutex_unlock(&xadc->mutex);
+
+ return ret;
+}
+
+static unsigned long xadc_get_dclk_rate(struct xadc *xadc)
+{
+ return xadc->ops->get_dclk_rate(xadc);
+}
+
+static int xadc_update_scan_mode(struct iio_dev *indio_dev,
+ const unsigned long *mask)
+{
+ struct xadc *xadc = iio_priv(indio_dev);
+ unsigned int n;
+
+ n = bitmap_weight(mask, indio_dev->masklength);
+
+ kfree(xadc->data);
+ xadc->data = kcalloc(n, sizeof(*xadc->data), GFP_KERNEL);
+ if (!xadc->data)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static unsigned int xadc_scan_index_to_channel(unsigned int scan_index)
+{
+ switch (scan_index) {
+ case 5:
+ return XADC_REG_VCCPINT;
+ case 6:
+ return XADC_REG_VCCPAUX;
+ case 7:
+ return XADC_REG_VCCO_DDR;
+ case 8:
+ return XADC_REG_TEMP;
+ case 9:
+ return XADC_REG_VCCINT;
+ case 10:
+ return XADC_REG_VCCAUX;
+ case 11:
+ return XADC_REG_VPVN;
+ case 12:
+ return XADC_REG_VREFP;
+ case 13:
+ return XADC_REG_VREFN;
+ case 14:
+ return XADC_REG_VCCBRAM;
+ default:
+ return XADC_REG_VAUX(scan_index - 16);
+ }
+}
+
+static irqreturn_t xadc_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct xadc *xadc = iio_priv(indio_dev);
+ unsigned int chan;
+ int i, j;
+
+ if (!xadc->data)
+ goto out;
+
+ j = 0;
+ for_each_set_bit(i, indio_dev->active_scan_mask,
+ indio_dev->masklength) {
+ chan = xadc_scan_index_to_channel(i);
+ xadc_read_adc_reg(xadc, chan, &xadc->data[j]);
+ j++;
+ }
+
+ iio_push_to_buffers(indio_dev, xadc->data);
+
+out:
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+static int xadc_trigger_set_state(struct iio_trigger *trigger, bool state)
+{
+ struct xadc *xadc = iio_trigger_get_drvdata(trigger);
+ unsigned long flags;
+ unsigned int convst;
+ unsigned int val;
+ int ret = 0;
+
+ mutex_lock(&xadc->mutex);
+
+ if (state) {
+ /* Only one of the two triggers can be active at the a time. */
+ if (xadc->trigger != NULL) {
+ ret = -EBUSY;
+ goto err_out;
+ } else {
+ xadc->trigger = trigger;
+ if (trigger == xadc->convst_trigger)
+ convst = XADC_CONF0_EC;
+ else
+ convst = 0;
+ }
+ ret = _xadc_update_adc_reg(xadc, XADC_REG_CONF1, XADC_CONF0_EC,
+ convst);
+ if (ret)
+ goto err_out;
+ } else {
+ xadc->trigger = NULL;
+ }
+
+ spin_lock_irqsave(&xadc->lock, flags);
+ xadc_read_reg(xadc, XADC_AXI_REG_IPIER, &val);
+ xadc_write_reg(xadc, XADC_AXI_REG_IPISR, val & XADC_AXI_INT_EOS);
+ if (state)
+ val |= XADC_AXI_INT_EOS;
+ else
+ val &= ~XADC_AXI_INT_EOS;
+ xadc_write_reg(xadc, XADC_AXI_REG_IPIER, val);
+ spin_unlock_irqrestore(&xadc->lock, flags);
+
+err_out:
+ mutex_unlock(&xadc->mutex);
+
+ return ret;
+}
+
+static const struct iio_trigger_ops xadc_trigger_ops = {
+ .owner = THIS_MODULE,
+ .set_trigger_state = &xadc_trigger_set_state,
+};
+
+static struct iio_trigger *xadc_alloc_trigger(struct iio_dev *indio_dev,
+ const char *name)
+{
+ struct iio_trigger *trig;
+ int ret;
+
+ trig = iio_trigger_alloc("%s%d-%s", indio_dev->name,
+ indio_dev->id, name);
+ if (trig == NULL)
+ return ERR_PTR(-ENOMEM);
+
+ trig->dev.parent = indio_dev->dev.parent;
+ trig->ops = &xadc_trigger_ops;
+ iio_trigger_set_drvdata(trig, iio_priv(indio_dev));
+
+ ret = iio_trigger_register(trig);
+ if (ret)
+ goto error_free_trig;
+
+ return trig;
+
+error_free_trig:
+ iio_trigger_free(trig);
+ return ERR_PTR(ret);
+}
+
+static int xadc_power_adc_b(struct xadc *xadc, unsigned int seq_mode)
+{
+ uint16_t val;
+
+ switch (seq_mode) {
+ case XADC_CONF1_SEQ_SIMULTANEOUS:
+ case XADC_CONF1_SEQ_INDEPENDENT:
+ val = XADC_CONF2_PD_ADC_B;
+ break;
+ default:
+ val = 0;
+ break;
+ }
+
+ return xadc_update_adc_reg(xadc, XADC_REG_CONF2, XADC_CONF2_PD_MASK,
+ val);
+}
+
+static int xadc_get_seq_mode(struct xadc *xadc, unsigned long scan_mode)
+{
+ unsigned int aux_scan_mode = scan_mode >> 16;
+
+ if (xadc->external_mux_mode == XADC_EXTERNAL_MUX_DUAL)
+ return XADC_CONF1_SEQ_SIMULTANEOUS;
+
+ if ((aux_scan_mode & 0xff00) == 0 ||
+ (aux_scan_mode & 0x00ff) == 0)
+ return XADC_CONF1_SEQ_CONTINUOUS;
+
+ return XADC_CONF1_SEQ_SIMULTANEOUS;
+}
+
+static int xadc_postdisable(struct iio_dev *indio_dev)
+{
+ struct xadc *xadc = iio_priv(indio_dev);
+ unsigned long scan_mask;
+ int ret;
+ int i;
+
+ scan_mask = 1; /* Run calibration as part of the sequence */
+ for (i = 0; i < indio_dev->num_channels; i++)
+ scan_mask |= BIT(indio_dev->channels[i].scan_index);
+
+ /* Enable all channels and calibration */
+ ret = xadc_write_adc_reg(xadc, XADC_REG_SEQ(0), scan_mask & 0xffff);
+ if (ret)
+ return ret;
+
+ ret = xadc_write_adc_reg(xadc, XADC_REG_SEQ(1), scan_mask >> 16);
+ if (ret)
+ return ret;
+
+ ret = xadc_update_adc_reg(xadc, XADC_REG_CONF1, XADC_CONF1_SEQ_MASK,
+ XADC_CONF1_SEQ_CONTINUOUS);
+ if (ret)
+ return ret;
+
+ return xadc_power_adc_b(xadc, XADC_CONF1_SEQ_CONTINUOUS);
+}
+
+static int xadc_preenable(struct iio_dev *indio_dev)
+{
+ struct xadc *xadc = iio_priv(indio_dev);
+ unsigned long scan_mask;
+ int seq_mode;
+ int ret;
+
+ ret = xadc_update_adc_reg(xadc, XADC_REG_CONF1, XADC_CONF1_SEQ_MASK,
+ XADC_CONF1_SEQ_DEFAULT);
+ if (ret)
+ goto err;
+
+ scan_mask = *indio_dev->active_scan_mask;
+ seq_mode = xadc_get_seq_mode(xadc, scan_mask);
+
+ ret = xadc_write_adc_reg(xadc, XADC_REG_SEQ(0), scan_mask & 0xffff);
+ if (ret)
+ goto err;
+
+ ret = xadc_write_adc_reg(xadc, XADC_REG_SEQ(1), scan_mask >> 16);
+ if (ret)
+ goto err;
+
+ ret = xadc_power_adc_b(xadc, seq_mode);
+ if (ret)
+ goto err;
+
+ ret = xadc_update_adc_reg(xadc, XADC_REG_CONF1, XADC_CONF1_SEQ_MASK,
+ seq_mode);
+ if (ret)
+ goto err;
+
+ return 0;
+err:
+ xadc_postdisable(indio_dev);
+ return ret;
+}
+
+static struct iio_buffer_setup_ops xadc_buffer_ops = {
+ .preenable = &xadc_preenable,
+ .postenable = &iio_triggered_buffer_postenable,
+ .predisable = &iio_triggered_buffer_predisable,
+ .postdisable = &xadc_postdisable,
+};
+
+static int xadc_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val, int *val2, long info)
+{
+ struct xadc *xadc = iio_priv(indio_dev);
+ unsigned int div;
+ uint16_t val16;
+ int ret;
+
+ switch (info) {
+ case IIO_CHAN_INFO_RAW:
+ if (iio_buffer_enabled(indio_dev))
+ return -EBUSY;
+ ret = xadc_read_adc_reg(xadc, chan->address, &val16);
+ if (ret < 0)
+ return ret;
+
+ val16 >>= 4;
+ if (chan->scan_type.sign == 'u')
+ *val = val16;
+ else
+ *val = sign_extend32(val16, 11);
+
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_VOLTAGE:
+ /* V = (val * 3.0) / 4096 */
+ switch (chan->address) {
+ case XADC_REG_VCCINT:
+ case XADC_REG_VCCAUX:
+ case XADC_REG_VCCBRAM:
+ case XADC_REG_VCCPINT:
+ case XADC_REG_VCCPAUX:
+ case XADC_REG_VCCO_DDR:
+ *val = 3000;
+ break;
+ default:
+ *val = 1000;
+ break;
+ }
+ *val2 = 12;
+ return IIO_VAL_FRACTIONAL_LOG2;
+ case IIO_TEMP:
+ /* Temp in C = (val * 503.975) / 4096 - 273.15 */
+ *val = 503975;
+ *val2 = 12;
+ return IIO_VAL_FRACTIONAL_LOG2;
+ default:
+ return -EINVAL;
+ }
+ case IIO_CHAN_INFO_OFFSET:
+ /* Only the temperature channel has an offset */
+ *val = -((273150 << 12) / 503975);
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ ret = xadc_read_adc_reg(xadc, XADC_REG_CONF2, &val16);
+ if (ret)
+ return ret;
+
+ div = (val16 & XADC_CONF2_DIV_MASK) >> XADC_CONF2_DIV_OFFSET;
+ if (div < 2)
+ div = 2;
+
+ *val = xadc_get_dclk_rate(xadc) / div / 26;
+
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int xadc_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2, long info)
+{
+ struct xadc *xadc = iio_priv(indio_dev);
+ unsigned long clk_rate = xadc_get_dclk_rate(xadc);
+ unsigned int div;
+
+ if (info != IIO_CHAN_INFO_SAMP_FREQ)
+ return -EINVAL;
+
+ if (val <= 0)
+ return -EINVAL;
+
+ /* Max. 150 kSPS */
+ if (val > 150000)
+ val = 150000;
+
+ val *= 26;
+
+ /* Min 1MHz */
+ if (val < 1000000)
+ val = 1000000;
+
+ /*
+ * We want to round down, but only if we do not exceed the 150 kSPS
+ * limit.
+ */
+ div = clk_rate / val;
+ if (clk_rate / div / 26 > 150000)
+ div++;
+ if (div < 2)
+ div = 2;
+ else if (div > 0xff)
+ div = 0xff;
+
+ return xadc_update_adc_reg(xadc, XADC_REG_CONF2, XADC_CONF2_DIV_MASK,
+ div << XADC_CONF2_DIV_OFFSET);
+}
+
+static const struct iio_event_spec xadc_temp_events[] = {
+ {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_RISING,
+ .mask_separate = BIT(IIO_EV_INFO_ENABLE) |
+ BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_HYSTERESIS),
+ },
+};
+
+/* Separate values for upper and lower thresholds, but only a shared enabled */
+static const struct iio_event_spec xadc_voltage_events[] = {
+ {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_RISING,
+ .mask_separate = BIT(IIO_EV_INFO_VALUE),
+ }, {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_FALLING,
+ .mask_separate = BIT(IIO_EV_INFO_VALUE),
+ }, {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_EITHER,
+ .mask_separate = BIT(IIO_EV_INFO_ENABLE),
+ },
+};
+
+#define XADC_CHAN_TEMP(_chan, _scan_index, _addr) { \
+ .type = IIO_TEMP, \
+ .indexed = 1, \
+ .channel = (_chan), \
+ .address = (_addr), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_OFFSET), \
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .event_spec = xadc_temp_events, \
+ .num_event_specs = ARRAY_SIZE(xadc_temp_events), \
+ .scan_index = (_scan_index), \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = 12, \
+ .storagebits = 16, \
+ .shift = 4, \
+ .endianness = IIO_CPU, \
+ }, \
+}
+
+#define XADC_CHAN_VOLTAGE(_chan, _scan_index, _addr, _ext, _alarm) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = (_chan), \
+ .address = (_addr), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_SCALE), \
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .event_spec = (_alarm) ? xadc_voltage_events : NULL, \
+ .num_event_specs = (_alarm) ? ARRAY_SIZE(xadc_voltage_events) : 0, \
+ .scan_index = (_scan_index), \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = 12, \
+ .storagebits = 16, \
+ .shift = 4, \
+ .endianness = IIO_CPU, \
+ }, \
+ .extend_name = _ext, \
+}
+
+static const struct iio_chan_spec xadc_channels[] = {
+ XADC_CHAN_TEMP(0, 8, XADC_REG_TEMP),
+ XADC_CHAN_VOLTAGE(0, 9, XADC_REG_VCCINT, "vccint", true),
+ XADC_CHAN_VOLTAGE(1, 10, XADC_REG_VCCINT, "vccaux", true),
+ XADC_CHAN_VOLTAGE(2, 14, XADC_REG_VCCBRAM, "vccbram", true),
+ XADC_CHAN_VOLTAGE(3, 5, XADC_REG_VCCPINT, "vccpint", true),
+ XADC_CHAN_VOLTAGE(4, 6, XADC_REG_VCCPAUX, "vccpaux", true),
+ XADC_CHAN_VOLTAGE(5, 7, XADC_REG_VCCO_DDR, "vccoddr", true),
+ XADC_CHAN_VOLTAGE(6, 12, XADC_REG_VREFP, "vrefp", false),
+ XADC_CHAN_VOLTAGE(7, 13, XADC_REG_VREFN, "vrefn", false),
+ XADC_CHAN_VOLTAGE(8, 11, XADC_REG_VPVN, NULL, false),
+ XADC_CHAN_VOLTAGE(9, 16, XADC_REG_VAUX(0), NULL, false),
+ XADC_CHAN_VOLTAGE(10, 17, XADC_REG_VAUX(1), NULL, false),
+ XADC_CHAN_VOLTAGE(11, 18, XADC_REG_VAUX(2), NULL, false),
+ XADC_CHAN_VOLTAGE(12, 19, XADC_REG_VAUX(3), NULL, false),
+ XADC_CHAN_VOLTAGE(13, 20, XADC_REG_VAUX(4), NULL, false),
+ XADC_CHAN_VOLTAGE(14, 21, XADC_REG_VAUX(5), NULL, false),
+ XADC_CHAN_VOLTAGE(15, 22, XADC_REG_VAUX(6), NULL, false),
+ XADC_CHAN_VOLTAGE(16, 23, XADC_REG_VAUX(7), NULL, false),
+ XADC_CHAN_VOLTAGE(17, 24, XADC_REG_VAUX(8), NULL, false),
+ XADC_CHAN_VOLTAGE(18, 25, XADC_REG_VAUX(9), NULL, false),
+ XADC_CHAN_VOLTAGE(19, 26, XADC_REG_VAUX(10), NULL, false),
+ XADC_CHAN_VOLTAGE(20, 27, XADC_REG_VAUX(11), NULL, false),
+ XADC_CHAN_VOLTAGE(21, 28, XADC_REG_VAUX(12), NULL, false),
+ XADC_CHAN_VOLTAGE(22, 29, XADC_REG_VAUX(13), NULL, false),
+ XADC_CHAN_VOLTAGE(23, 30, XADC_REG_VAUX(14), NULL, false),
+ XADC_CHAN_VOLTAGE(24, 31, XADC_REG_VAUX(15), NULL, false),
+};
+
+static const struct iio_info xadc_info = {
+ .read_raw = &xadc_read_raw,
+ .write_raw = &xadc_write_raw,
+ .read_event_config = &xadc_read_event_config,
+ .write_event_config = &xadc_write_event_config,
+ .read_event_value = &xadc_read_event_value,
+ .write_event_value = &xadc_write_event_value,
+ .update_scan_mode = &xadc_update_scan_mode,
+ .driver_module = THIS_MODULE,
+};
+
+static const struct of_device_id xadc_of_match_table[] = {
+ { .compatible = "xlnx,zynq-xadc-1.00.a", (void *)&xadc_zynq_ops },
+ { .compatible = "xlnx,axi-xadc-1.00.a", (void *)&xadc_axi_ops },
+ { },
+};
+MODULE_DEVICE_TABLE(of, xadc_of_match_table);
+
+static int xadc_parse_dt(struct iio_dev *indio_dev, struct device_node *np,
+ unsigned int *conf)
+{
+ struct xadc *xadc = iio_priv(indio_dev);
+ struct iio_chan_spec *channels, *chan;
+ struct device_node *chan_node, *child;
+ unsigned int num_channels;
+ const char *external_mux;
+ u32 ext_mux_chan;
+ int reg;
+ int ret;
+
+ *conf = 0;
+
+ ret = of_property_read_string(np, "xlnx,external-mux", &external_mux);
+ if (ret < 0 || strcasecmp(external_mux, "none") == 0)
+ xadc->external_mux_mode = XADC_EXTERNAL_MUX_NONE;
+ else if (strcasecmp(external_mux, "single") == 0)
+ xadc->external_mux_mode = XADC_EXTERNAL_MUX_SINGLE;
+ else if (strcasecmp(external_mux, "dual") == 0)
+ xadc->external_mux_mode = XADC_EXTERNAL_MUX_DUAL;
+ else
+ return -EINVAL;
+
+ if (xadc->external_mux_mode != XADC_EXTERNAL_MUX_NONE) {
+ ret = of_property_read_u32(np, "xlnx,external-mux-channel",
+ &ext_mux_chan);
+ if (ret < 0)
+ return ret;
+
+ if (xadc->external_mux_mode == XADC_EXTERNAL_MUX_SINGLE) {
+ if (ext_mux_chan == 0)
+ ext_mux_chan = XADC_REG_VPVN;
+ else if (ext_mux_chan <= 16)
+ ext_mux_chan = XADC_REG_VAUX(ext_mux_chan - 1);
+ else
+ return -EINVAL;
+ } else {
+ if (ext_mux_chan > 0 && ext_mux_chan <= 8)
+ ext_mux_chan = XADC_REG_VAUX(ext_mux_chan - 1);
+ else
+ return -EINVAL;
+ }
+
+ *conf |= XADC_CONF0_MUX | XADC_CONF0_CHAN(ext_mux_chan);
+ }
+
+ channels = kmemdup(xadc_channels, sizeof(xadc_channels), GFP_KERNEL);
+ if (!channels)
+ return -ENOMEM;
+
+ num_channels = 9;
+ chan = &channels[9];
+
+ chan_node = of_get_child_by_name(np, "xlnx,channels");
+ if (chan_node) {
+ for_each_child_of_node(chan_node, child) {
+ if (num_channels >= ARRAY_SIZE(xadc_channels)) {
+ of_node_put(child);
+ break;
+ }
+
+ ret = of_property_read_u32(child, "reg", &reg);
+ if (ret || reg > 16)
+ continue;
+
+ if (of_property_read_bool(child, "xlnx,bipolar"))
+ chan->scan_type.sign = 's';
+
+ if (reg == 0) {
+ chan->scan_index = 11;
+ chan->address = XADC_REG_VPVN;
+ } else {
+ chan->scan_index = 15 + reg;
+ chan->scan_index = XADC_REG_VAUX(reg - 1);
+ }
+ num_channels++;
+ chan++;
+ }
+ }
+ of_node_put(chan_node);
+
+ indio_dev->num_channels = num_channels;
+ indio_dev->channels = krealloc(channels, sizeof(*channels) *
+ num_channels, GFP_KERNEL);
+ /* If we can't resize the channels array, just use the original */
+ if (!indio_dev->channels)
+ indio_dev->channels = channels;
+
+ return 0;
+}
+
+static int xadc_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *id;
+ struct iio_dev *indio_dev;
+ unsigned int bipolar_mask;
+ struct resource *mem;
+ unsigned int conf0;
+ struct xadc *xadc;
+ int ret;
+ int irq;
+ int i;
+
+ if (!pdev->dev.of_node)
+ return -ENODEV;
+
+ id = of_match_node(xadc_of_match_table, pdev->dev.of_node);
+ if (!id)
+ return -EINVAL;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0)
+ return -ENXIO;
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*xadc));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ xadc = iio_priv(indio_dev);
+ xadc->ops = id->data;
+ init_completion(&xadc->completion);
+ mutex_init(&xadc->mutex);
+ spin_lock_init(&xadc->lock);
+ INIT_DELAYED_WORK(&xadc->zynq_unmask_work, xadc_zynq_unmask_worker);
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ xadc->base = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(xadc->base))
+ return PTR_ERR(xadc->base);
+
+ indio_dev->dev.parent = &pdev->dev;
+ indio_dev->dev.of_node = pdev->dev.of_node;
+ indio_dev->name = "xadc";
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &xadc_info;
+
+ ret = xadc_parse_dt(indio_dev, pdev->dev.of_node, &conf0);
+ if (ret)
+ goto err_device_free;
+
+ if (xadc->ops->flags & XADC_FLAGS_BUFFERED) {
+ ret = iio_triggered_buffer_setup(indio_dev,
+ &iio_pollfunc_store_time, &xadc_trigger_handler,
+ &xadc_buffer_ops);
+ if (ret)
+ goto err_device_free;
+
+ xadc->convst_trigger = xadc_alloc_trigger(indio_dev, "convst");
+ if (IS_ERR(xadc->convst_trigger))
+ goto err_triggered_buffer_cleanup;
+ xadc->samplerate_trigger = xadc_alloc_trigger(indio_dev,
+ "samplerate");
+ if (IS_ERR(xadc->samplerate_trigger))
+ goto err_free_convst_trigger;
+ }
+
+ xadc->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(xadc->clk)) {
+ ret = PTR_ERR(xadc->clk);
+ goto err_free_samplerate_trigger;
+ }
+ clk_prepare_enable(xadc->clk);
+
+ ret = xadc->ops->setup(pdev, indio_dev, irq);
+ if (ret)
+ goto err_free_samplerate_trigger;
+
+ ret = request_threaded_irq(irq, xadc->ops->interrupt_handler,
+ xadc->ops->threaded_interrupt_handler,
+ 0, dev_name(&pdev->dev), indio_dev);
+ if (ret)
+ goto err_clk_disable_unprepare;
+
+ for (i = 0; i < 16; i++)
+ xadc_read_adc_reg(xadc, XADC_REG_THRESHOLD(i),
+ &xadc->threshold[i]);
+
+ ret = xadc_write_adc_reg(xadc, XADC_REG_CONF0, conf0);
+ if (ret)
+ goto err_free_irq;
+
+ bipolar_mask = 0;
+ for (i = 0; i < indio_dev->num_channels; i++) {
+ if (indio_dev->channels[i].scan_type.sign == 's')
+ bipolar_mask |= BIT(indio_dev->channels[i].scan_index);
+ }
+
+ ret = xadc_write_adc_reg(xadc, XADC_REG_INPUT_MODE(0), bipolar_mask);
+ if (ret)
+ goto err_free_irq;
+ ret = xadc_write_adc_reg(xadc, XADC_REG_INPUT_MODE(1),
+ bipolar_mask >> 16);
+ if (ret)
+ goto err_free_irq;
+
+ /* Disable all alarms */
+ xadc_update_adc_reg(xadc, XADC_REG_CONF1, XADC_CONF1_ALARM_MASK,
+ XADC_CONF1_ALARM_MASK);
+
+ /* Set thresholds to min/max */
+ for (i = 0; i < 16; i++) {
+ /*
+ * Set max voltage threshold and both temperature thresholds to
+ * 0xffff, min voltage threshold to 0.
+ */
+ if (i % 8 < 4 || i == 7)
+ xadc->threshold[i] = 0xffff;
+ else
+ xadc->threshold[i] = 0;
+ xadc_write_adc_reg(xadc, XADC_REG_THRESHOLD(i),
+ xadc->threshold[i]);
+ }
+
+ /* Go to non-buffered mode */
+ xadc_postdisable(indio_dev);
+
+ ret = iio_device_register(indio_dev);
+ if (ret)
+ goto err_free_irq;
+
+ platform_set_drvdata(pdev, indio_dev);
+
+ return 0;
+
+err_free_irq:
+ free_irq(irq, indio_dev);
+err_free_samplerate_trigger:
+ if (xadc->ops->flags & XADC_FLAGS_BUFFERED)
+ iio_trigger_free(xadc->samplerate_trigger);
+err_free_convst_trigger:
+ if (xadc->ops->flags & XADC_FLAGS_BUFFERED)
+ iio_trigger_free(xadc->convst_trigger);
+err_triggered_buffer_cleanup:
+ if (xadc->ops->flags & XADC_FLAGS_BUFFERED)
+ iio_triggered_buffer_cleanup(indio_dev);
+err_clk_disable_unprepare:
+ clk_disable_unprepare(xadc->clk);
+err_device_free:
+ kfree(indio_dev->channels);
+
+ return ret;
+}
+
+static int xadc_remove(struct platform_device *pdev)
+{
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct xadc *xadc = iio_priv(indio_dev);
+ int irq = platform_get_irq(pdev, 0);
+
+ iio_device_unregister(indio_dev);
+ if (xadc->ops->flags & XADC_FLAGS_BUFFERED) {
+ iio_trigger_free(xadc->samplerate_trigger);
+ iio_trigger_free(xadc->convst_trigger);
+ iio_triggered_buffer_cleanup(indio_dev);
+ }
+ free_irq(irq, indio_dev);
+ clk_disable_unprepare(xadc->clk);
+ cancel_delayed_work(&xadc->zynq_unmask_work);
+ kfree(xadc->data);
+ kfree(indio_dev->channels);
+
+ return 0;
+}
+
+static struct platform_driver xadc_driver = {
+ .probe = xadc_probe,
+ .remove = xadc_remove,
+ .driver = {
+ .name = "xadc",
+ .owner = THIS_MODULE,
+ .of_match_table = xadc_of_match_table,
+ },
+};
+module_platform_driver(xadc_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Xilinx XADC IIO driver");
diff --git a/drivers/iio/adc/xilinx-xadc-events.c b/drivers/iio/adc/xilinx-xadc-events.c
new file mode 100644
index 000000000000..3e7f0d7a80c3
--- /dev/null
+++ b/drivers/iio/adc/xilinx-xadc-events.c
@@ -0,0 +1,254 @@
+/*
+ * Xilinx XADC driver
+ *
+ * Copyright 2013 Analog Devices Inc.
+ * Author: Lars-Peter Clauen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/kernel.h>
+
+#include "xilinx-xadc.h"
+
+static const struct iio_chan_spec *xadc_event_to_channel(
+ struct iio_dev *indio_dev, unsigned int event)
+{
+ switch (event) {
+ case XADC_THRESHOLD_OT_MAX:
+ case XADC_THRESHOLD_TEMP_MAX:
+ return &indio_dev->channels[0];
+ case XADC_THRESHOLD_VCCINT_MAX:
+ case XADC_THRESHOLD_VCCAUX_MAX:
+ return &indio_dev->channels[event];
+ default:
+ return &indio_dev->channels[event-1];
+ }
+}
+
+static void xadc_handle_event(struct iio_dev *indio_dev, unsigned int event)
+{
+ const struct iio_chan_spec *chan;
+ unsigned int offset;
+
+ /* Temperature threshold error, we don't handle this yet */
+ if (event == 0)
+ return;
+
+ if (event < 4)
+ offset = event;
+ else
+ offset = event + 4;
+
+ chan = xadc_event_to_channel(indio_dev, event);
+
+ if (chan->type == IIO_TEMP) {
+ /*
+ * The temperature channel only supports over-temperature
+ * events.
+ */
+ iio_push_event(indio_dev,
+ IIO_UNMOD_EVENT_CODE(chan->type, chan->channel,
+ IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING),
+ iio_get_time_ns());
+ } else {
+ /*
+ * For other channels we don't know whether it is a upper or
+ * lower threshold event. Userspace will have to check the
+ * channel value if it wants to know.
+ */
+ iio_push_event(indio_dev,
+ IIO_UNMOD_EVENT_CODE(chan->type, chan->channel,
+ IIO_EV_TYPE_THRESH, IIO_EV_DIR_EITHER),
+ iio_get_time_ns());
+ }
+}
+
+void xadc_handle_events(struct iio_dev *indio_dev, unsigned long events)
+{
+ unsigned int i;
+
+ for_each_set_bit(i, &events, 8)
+ xadc_handle_event(indio_dev, i);
+}
+
+static unsigned xadc_get_threshold_offset(const struct iio_chan_spec *chan,
+ enum iio_event_direction dir)
+{
+ unsigned int offset;
+
+ if (chan->type == IIO_TEMP) {
+ offset = XADC_THRESHOLD_OT_MAX;
+ } else {
+ if (chan->channel < 2)
+ offset = chan->channel + 1;
+ else
+ offset = chan->channel + 6;
+ }
+
+ if (dir == IIO_EV_DIR_FALLING)
+ offset += 4;
+
+ return offset;
+}
+
+static unsigned int xadc_get_alarm_mask(const struct iio_chan_spec *chan)
+{
+ if (chan->type == IIO_TEMP) {
+ return XADC_ALARM_OT_MASK;
+ } else {
+ switch (chan->channel) {
+ case 0:
+ return XADC_ALARM_VCCINT_MASK;
+ case 1:
+ return XADC_ALARM_VCCAUX_MASK;
+ case 2:
+ return XADC_ALARM_VCCBRAM_MASK;
+ case 3:
+ return XADC_ALARM_VCCPINT_MASK;
+ case 4:
+ return XADC_ALARM_VCCPAUX_MASK;
+ case 5:
+ return XADC_ALARM_VCCODDR_MASK;
+ default:
+ /* We will never get here */
+ return 0;
+ }
+ }
+}
+
+int xadc_read_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, enum iio_event_type type,
+ enum iio_event_direction dir)
+{
+ struct xadc *xadc = iio_priv(indio_dev);
+
+ return (bool)(xadc->alarm_mask & xadc_get_alarm_mask(chan));
+}
+
+int xadc_write_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, enum iio_event_type type,
+ enum iio_event_direction dir, int state)
+{
+ unsigned int alarm = xadc_get_alarm_mask(chan);
+ struct xadc *xadc = iio_priv(indio_dev);
+ uint16_t cfg, old_cfg;
+ int ret;
+
+ mutex_lock(&xadc->mutex);
+
+ if (state)
+ xadc->alarm_mask |= alarm;
+ else
+ xadc->alarm_mask &= ~alarm;
+
+ xadc->ops->update_alarm(xadc, xadc->alarm_mask);
+
+ ret = _xadc_read_adc_reg(xadc, XADC_REG_CONF1, &cfg);
+ if (ret)
+ goto err_out;
+
+ old_cfg = cfg;
+ cfg |= XADC_CONF1_ALARM_MASK;
+ cfg &= ~((xadc->alarm_mask & 0xf0) << 4); /* bram, pint, paux, ddr */
+ cfg &= ~((xadc->alarm_mask & 0x08) >> 3); /* ot */
+ cfg &= ~((xadc->alarm_mask & 0x07) << 1); /* temp, vccint, vccaux */
+ if (old_cfg != cfg)
+ ret = _xadc_write_adc_reg(xadc, XADC_REG_CONF1, cfg);
+
+err_out:
+ mutex_unlock(&xadc->mutex);
+
+ return ret;
+}
+
+/* Register value is msb aligned, the lower 4 bits are ignored */
+#define XADC_THRESHOLD_VALUE_SHIFT 4
+
+int xadc_read_event_value(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, enum iio_event_type type,
+ enum iio_event_direction dir, enum iio_event_info info,
+ int *val, int *val2)
+{
+ unsigned int offset = xadc_get_threshold_offset(chan, dir);
+ struct xadc *xadc = iio_priv(indio_dev);
+
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ *val = xadc->threshold[offset];
+ break;
+ case IIO_EV_INFO_HYSTERESIS:
+ *val = xadc->temp_hysteresis;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ *val >>= XADC_THRESHOLD_VALUE_SHIFT;
+
+ return IIO_VAL_INT;
+}
+
+int xadc_write_event_value(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, enum iio_event_type type,
+ enum iio_event_direction dir, enum iio_event_info info,
+ int val, int val2)
+{
+ unsigned int offset = xadc_get_threshold_offset(chan, dir);
+ struct xadc *xadc = iio_priv(indio_dev);
+ int ret = 0;
+
+ val <<= XADC_THRESHOLD_VALUE_SHIFT;
+
+ if (val < 0 || val > 0xffff)
+ return -EINVAL;
+
+ mutex_lock(&xadc->mutex);
+
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ xadc->threshold[offset] = val;
+ break;
+ case IIO_EV_INFO_HYSTERESIS:
+ xadc->temp_hysteresis = val;
+ break;
+ default:
+ mutex_unlock(&xadc->mutex);
+ return -EINVAL;
+ }
+
+ if (chan->type == IIO_TEMP) {
+ /*
+ * According to the datasheet we need to set the lower 4 bits to
+ * 0x3, otherwise 125 degree celsius will be used as the
+ * threshold.
+ */
+ val |= 0x3;
+
+ /*
+ * Since we store the hysteresis as relative (to the threshold)
+ * value, but the hardware expects an absolute value we need to
+ * recalcualte this value whenever the hysteresis or the
+ * threshold changes.
+ */
+ if (xadc->threshold[offset] < xadc->temp_hysteresis)
+ xadc->threshold[offset + 4] = 0;
+ else
+ xadc->threshold[offset + 4] = xadc->threshold[offset] -
+ xadc->temp_hysteresis;
+ ret = _xadc_write_adc_reg(xadc, XADC_REG_THRESHOLD(offset + 4),
+ xadc->threshold[offset + 4]);
+ if (ret)
+ goto out_unlock;
+ }
+
+ if (info == IIO_EV_INFO_VALUE)
+ ret = _xadc_write_adc_reg(xadc, XADC_REG_THRESHOLD(offset), val);
+
+out_unlock:
+ mutex_unlock(&xadc->mutex);
+
+ return ret;
+}
diff --git a/drivers/iio/adc/xilinx-xadc.h b/drivers/iio/adc/xilinx-xadc.h
new file mode 100644
index 000000000000..c7487e8d7f80
--- /dev/null
+++ b/drivers/iio/adc/xilinx-xadc.h
@@ -0,0 +1,209 @@
+/*
+ * Xilinx XADC driver
+ *
+ * Copyright 2013 Analog Devices Inc.
+ * Author: Lars-Peter Clauen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef __IIO_XILINX_XADC__
+#define __IIO_XILINX_XADC__
+
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+
+struct iio_dev;
+struct clk;
+struct xadc_ops;
+struct platform_device;
+
+void xadc_handle_events(struct iio_dev *indio_dev, unsigned long events);
+
+int xadc_read_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, enum iio_event_type type,
+ enum iio_event_direction dir);
+int xadc_write_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, enum iio_event_type type,
+ enum iio_event_direction dir, int state);
+int xadc_read_event_value(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, enum iio_event_type type,
+ enum iio_event_direction dir, enum iio_event_info info,
+ int *val, int *val2);
+int xadc_write_event_value(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan, enum iio_event_type type,
+ enum iio_event_direction dir, enum iio_event_info info,
+ int val, int val2);
+
+enum xadc_external_mux_mode {
+ XADC_EXTERNAL_MUX_NONE,
+ XADC_EXTERNAL_MUX_SINGLE,
+ XADC_EXTERNAL_MUX_DUAL,
+};
+
+struct xadc {
+ void __iomem *base;
+ struct clk *clk;
+
+ const struct xadc_ops *ops;
+
+ uint16_t threshold[16];
+ uint16_t temp_hysteresis;
+ unsigned int alarm_mask;
+
+ uint16_t *data;
+
+ struct iio_trigger *trigger;
+ struct iio_trigger *convst_trigger;
+ struct iio_trigger *samplerate_trigger;
+
+ enum xadc_external_mux_mode external_mux_mode;
+
+ unsigned int zynq_alarm;
+ unsigned int zynq_masked_alarm;
+ unsigned int zynq_intmask;
+ struct delayed_work zynq_unmask_work;
+
+ struct mutex mutex;
+ spinlock_t lock;
+
+ struct completion completion;
+};
+
+struct xadc_ops {
+ int (*read)(struct xadc *, unsigned int, uint16_t *);
+ int (*write)(struct xadc *, unsigned int, uint16_t);
+ int (*setup)(struct platform_device *pdev, struct iio_dev *indio_dev,
+ int irq);
+ void (*update_alarm)(struct xadc *, unsigned int);
+ unsigned long (*get_dclk_rate)(struct xadc *);
+ irqreturn_t (*interrupt_handler)(int, void *);
+ irqreturn_t (*threaded_interrupt_handler)(int, void *);
+
+ unsigned int flags;
+};
+
+static inline int _xadc_read_adc_reg(struct xadc *xadc, unsigned int reg,
+ uint16_t *val)
+{
+ lockdep_assert_held(&xadc->mutex);
+ return xadc->ops->read(xadc, reg, val);
+}
+
+static inline int _xadc_write_adc_reg(struct xadc *xadc, unsigned int reg,
+ uint16_t val)
+{
+ lockdep_assert_held(&xadc->mutex);
+ return xadc->ops->write(xadc, reg, val);
+}
+
+static inline int xadc_read_adc_reg(struct xadc *xadc, unsigned int reg,
+ uint16_t *val)
+{
+ int ret;
+
+ mutex_lock(&xadc->mutex);
+ ret = _xadc_read_adc_reg(xadc, reg, val);
+ mutex_unlock(&xadc->mutex);
+ return ret;
+}
+
+static inline int xadc_write_adc_reg(struct xadc *xadc, unsigned int reg,
+ uint16_t val)
+{
+ int ret;
+
+ mutex_lock(&xadc->mutex);
+ ret = _xadc_write_adc_reg(xadc, reg, val);
+ mutex_unlock(&xadc->mutex);
+ return ret;
+}
+
+/* XADC hardmacro register definitions */
+#define XADC_REG_TEMP 0x00
+#define XADC_REG_VCCINT 0x01
+#define XADC_REG_VCCAUX 0x02
+#define XADC_REG_VPVN 0x03
+#define XADC_REG_VREFP 0x04
+#define XADC_REG_VREFN 0x05
+#define XADC_REG_VCCBRAM 0x06
+
+#define XADC_REG_VCCPINT 0x0d
+#define XADC_REG_VCCPAUX 0x0e
+#define XADC_REG_VCCO_DDR 0x0f
+#define XADC_REG_VAUX(x) (0x10 + (x))
+
+#define XADC_REG_MAX_TEMP 0x20
+#define XADC_REG_MAX_VCCINT 0x21
+#define XADC_REG_MAX_VCCAUX 0x22
+#define XADC_REG_MAX_VCCBRAM 0x23
+#define XADC_REG_MIN_TEMP 0x24
+#define XADC_REG_MIN_VCCINT 0x25
+#define XADC_REG_MIN_VCCAUX 0x26
+#define XADC_REG_MIN_VCCBRAM 0x27
+#define XADC_REG_MAX_VCCPINT 0x28
+#define XADC_REG_MAX_VCCPAUX 0x29
+#define XADC_REG_MAX_VCCO_DDR 0x2a
+#define XADC_REG_MIN_VCCPINT 0x2b
+#define XADC_REG_MIN_VCCPAUX 0x2c
+#define XADC_REG_MIN_VCCO_DDR 0x2d
+
+#define XADC_REG_CONF0 0x40
+#define XADC_REG_CONF1 0x41
+#define XADC_REG_CONF2 0x42
+#define XADC_REG_SEQ(x) (0x48 + (x))
+#define XADC_REG_INPUT_MODE(x) (0x4c + (x))
+#define XADC_REG_THRESHOLD(x) (0x50 + (x))
+
+#define XADC_REG_FLAG 0x3f
+
+#define XADC_CONF0_EC BIT(9)
+#define XADC_CONF0_ACQ BIT(8)
+#define XADC_CONF0_MUX BIT(11)
+#define XADC_CONF0_CHAN(x) (x)
+
+#define XADC_CONF1_SEQ_MASK (0xf << 12)
+#define XADC_CONF1_SEQ_DEFAULT (0 << 12)
+#define XADC_CONF1_SEQ_SINGLE_PASS (1 << 12)
+#define XADC_CONF1_SEQ_CONTINUOUS (2 << 12)
+#define XADC_CONF1_SEQ_SINGLE_CHANNEL (3 << 12)
+#define XADC_CONF1_SEQ_SIMULTANEOUS (4 << 12)
+#define XADC_CONF1_SEQ_INDEPENDENT (8 << 12)
+#define XADC_CONF1_ALARM_MASK 0x0f0f
+
+#define XADC_CONF2_DIV_MASK 0xff00
+#define XADC_CONF2_DIV_OFFSET 8
+
+#define XADC_CONF2_PD_MASK (0x3 << 4)
+#define XADC_CONF2_PD_NONE (0x0 << 4)
+#define XADC_CONF2_PD_ADC_B (0x2 << 4)
+#define XADC_CONF2_PD_BOTH (0x3 << 4)
+
+#define XADC_ALARM_TEMP_MASK BIT(0)
+#define XADC_ALARM_VCCINT_MASK BIT(1)
+#define XADC_ALARM_VCCAUX_MASK BIT(2)
+#define XADC_ALARM_OT_MASK BIT(3)
+#define XADC_ALARM_VCCBRAM_MASK BIT(4)
+#define XADC_ALARM_VCCPINT_MASK BIT(5)
+#define XADC_ALARM_VCCPAUX_MASK BIT(6)
+#define XADC_ALARM_VCCODDR_MASK BIT(7)
+
+#define XADC_THRESHOLD_TEMP_MAX 0x0
+#define XADC_THRESHOLD_VCCINT_MAX 0x1
+#define XADC_THRESHOLD_VCCAUX_MAX 0x2
+#define XADC_THRESHOLD_OT_MAX 0x3
+#define XADC_THRESHOLD_TEMP_MIN 0x4
+#define XADC_THRESHOLD_VCCINT_MIN 0x5
+#define XADC_THRESHOLD_VCCAUX_MIN 0x6
+#define XADC_THRESHOLD_OT_MIN 0x7
+#define XADC_THRESHOLD_VCCBRAM_MAX 0x8
+#define XADC_THRESHOLD_VCCPINT_MAX 0x9
+#define XADC_THRESHOLD_VCCPAUX_MAX 0xa
+#define XADC_THRESHOLD_VCCODDR_MAX 0xb
+#define XADC_THRESHOLD_VCCBRAM_MIN 0xc
+#define XADC_THRESHOLD_VCCPINT_MIN 0xd
+#define XADC_THRESHOLD_VCCPAUX_MIN 0xe
+#define XADC_THRESHOLD_VCCODDR_MIN 0xf
+
+#endif
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-12 14:06:28 +0300