diff options
Diffstat (limited to 'drivers/iio/adc/ad7768-1.c')
| -rw-r--r-- | drivers/iio/adc/ad7768-1.c | 23 |
1 files changed, 19 insertions, 4 deletions
diff --git a/drivers/iio/adc/ad7768-1.c b/drivers/iio/adc/ad7768-1.c index a9248a85466e..7956948166ab 100644 --- a/drivers/iio/adc/ad7768-1.c +++ b/drivers/iio/adc/ad7768-1.c @@ -203,6 +203,24 @@ static int ad7768_spi_reg_write(struct ad7768_state *st, return spi_write(st->spi, st->data.d8, 2); } +static int ad7768_send_sync_pulse(struct ad7768_state *st) +{ + /* + * The datasheet specifies a minimum SYNC_IN pulse width of 1.5 × Tmclk, + * where Tmclk is the MCLK period. The supported MCLK frequencies range + * from 0.6 MHz to 17 MHz, which corresponds to a minimum SYNC_IN pulse + * width of approximately 2.5 µs in the worst-case scenario (0.6 MHz). + * + * Add a delay to ensure the pulse width is always sufficient to + * trigger synchronization. + */ + gpiod_set_value_cansleep(st->gpio_sync_in, 1); + fsleep(3); + gpiod_set_value_cansleep(st->gpio_sync_in, 0); + + return 0; +} + static int ad7768_set_mode(struct ad7768_state *st, enum ad7768_conv_mode mode) { @@ -288,10 +306,7 @@ static int ad7768_set_dig_fil(struct ad7768_state *st, return ret; /* A sync-in pulse is required every time the filter dec rate changes */ - gpiod_set_value(st->gpio_sync_in, 1); - gpiod_set_value(st->gpio_sync_in, 0); - - return 0; + return ad7768_send_sync_pulse(st); } static int ad7768_set_freq(struct ad7768_state *st, |