summaryrefslogtreecommitdiff
path: root/drivers/iio/accel
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/accel')
-rw-r--r--drivers/iio/accel/Kconfig45
-rw-r--r--drivers/iio/accel/Makefile5
-rw-r--r--drivers/iio/accel/da280.c183
-rw-r--r--drivers/iio/accel/da311.c305
-rw-r--r--drivers/iio/accel/dmard10.c266
-rw-r--r--drivers/iio/accel/mma7660.c2
-rw-r--r--drivers/iio/accel/mma8452.c79
-rw-r--r--drivers/iio/accel/sca3000.c1576
-rw-r--r--drivers/iio/accel/st_accel.h1
-rw-r--r--drivers/iio/accel/st_accel_core.c73
-rw-r--r--drivers/iio/accel/st_accel_i2c.c5
-rw-r--r--drivers/iio/accel/st_accel_spi.c1
12 files changed, 2503 insertions, 38 deletions
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 2b791fe1e2bc..c68bdb649005 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -52,6 +52,26 @@ config BMC150_ACCEL_SPI
tristate
select REGMAP_SPI
+config DA280
+ tristate "MiraMEMS DA280 3-axis 14-bit digital accelerometer driver"
+ depends on I2C
+ help
+ Say yes here to build support for the MiraMEMS DA280 3-axis 14-bit
+ digital accelerometer.
+
+ To compile this driver as a module, choose M here: the
+ module will be called da280.
+
+config DA311
+ tristate "MiraMEMS DA311 3-axis 12-bit digital accelerometer driver"
+ depends on I2C
+ help
+ Say yes here to build support for the MiraMEMS DA311 3-axis 12-bit
+ digital accelerometer.
+
+ To compile this driver as a module, choose M here: the
+ module will be called da311.
+
config DMARD06
tristate "Domintech DMARD06 Digital Accelerometer Driver"
depends on OF || COMPILE_TEST
@@ -73,6 +93,16 @@ config DMARD09
Choosing M will build the driver as a module. If so, the module
will be called dmard09.
+config DMARD10
+ tristate "Domintech DMARD10 3-axis Accelerometer Driver"
+ depends on I2C
+ help
+ Say yes here to get support for the Domintech DMARD10 3-axis
+ accelerometer.
+
+ Choosing M will build the driver as a module. If so, the module
+ will be called dmard10.
+
config HID_SENSOR_ACCEL_3D
depends on HID_SENSOR_HUB
select IIO_BUFFER
@@ -97,7 +127,8 @@ config IIO_ST_ACCEL_3AXIS
help
Say yes here to build support for STMicroelectronics accelerometers:
LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
- LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL.
+ LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL,
+ LNG2DM
This driver can also be built as a module. If so, these modules
will be created:
@@ -273,6 +304,18 @@ config MXC6255
To compile this driver as a module, choose M here: the module will be
called mxc6255.
+config SCA3000
+ select IIO_BUFFER
+ select IIO_KFIFO_BUF
+ depends on SPI
+ tristate "VTI SCA3000 series accelerometers"
+ help
+ Say Y here to build support for the VTI SCA3000 series of SPI
+ accelerometers. These devices use a hardware ring buffer.
+
+ To compile this driver as a module, say M here: the module will be
+ called sca3000.
+
config STK8312
tristate "Sensortek STK8312 3-Axis Accelerometer Driver"
depends on I2C
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index f5d3ddee619e..69fe8edc57a2 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -8,8 +8,11 @@ obj-$(CONFIG_BMA220) += bma220_spi.o
obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o
obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o
obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o
+obj-$(CONFIG_DA280) += da280.o
+obj-$(CONFIG_DA311) += da311.o
obj-$(CONFIG_DMARD06) += dmard06.o
obj-$(CONFIG_DMARD09) += dmard09.o
+obj-$(CONFIG_DMARD10) += dmard10.o
obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o
obj-$(CONFIG_KXSD9) += kxsd9.o
@@ -32,6 +35,8 @@ obj-$(CONFIG_MMA9553) += mma9553.o
obj-$(CONFIG_MXC4005) += mxc4005.o
obj-$(CONFIG_MXC6255) += mxc6255.o
+obj-$(CONFIG_SCA3000) += sca3000.o
+
obj-$(CONFIG_STK8312) += stk8312.o
obj-$(CONFIG_STK8BA50) += stk8ba50.o
diff --git a/drivers/iio/accel/da280.c b/drivers/iio/accel/da280.c
new file mode 100644
index 000000000000..ed8343aeac9c
--- /dev/null
+++ b/drivers/iio/accel/da280.c
@@ -0,0 +1,183 @@
+/**
+ * IIO driver for the MiraMEMS DA280 3-axis accelerometer and
+ * IIO driver for the MiraMEMS DA226 2-axis accelerometer
+ *
+ * Copyright (c) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/byteorder/generic.h>
+
+#define DA280_REG_CHIP_ID 0x01
+#define DA280_REG_ACC_X_LSB 0x02
+#define DA280_REG_ACC_Y_LSB 0x04
+#define DA280_REG_ACC_Z_LSB 0x06
+#define DA280_REG_MODE_BW 0x11
+
+#define DA280_CHIP_ID 0x13
+#define DA280_MODE_ENABLE 0x1e
+#define DA280_MODE_DISABLE 0x9e
+
+enum { da226, da280 };
+
+/*
+ * a value of + or -4096 corresponds to + or - 1G
+ * scale = 9.81 / 4096 = 0.002395019
+ */
+
+static const int da280_nscale = 2395019;
+
+#define DA280_CHANNEL(reg, axis) { \
+ .type = IIO_ACCEL, \
+ .address = reg, \
+ .modified = 1, \
+ .channel2 = IIO_MOD_##axis, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+}
+
+static const struct iio_chan_spec da280_channels[] = {
+ DA280_CHANNEL(DA280_REG_ACC_X_LSB, X),
+ DA280_CHANNEL(DA280_REG_ACC_Y_LSB, Y),
+ DA280_CHANNEL(DA280_REG_ACC_Z_LSB, Z),
+};
+
+struct da280_data {
+ struct i2c_client *client;
+};
+
+static int da280_enable(struct i2c_client *client, bool enable)
+{
+ u8 data = enable ? DA280_MODE_ENABLE : DA280_MODE_DISABLE;
+
+ return i2c_smbus_write_byte_data(client, DA280_REG_MODE_BW, data);
+}
+
+static int da280_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct da280_data *data = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ ret = i2c_smbus_read_word_data(data->client, chan->address);
+ if (ret < 0)
+ return ret;
+ /*
+ * Values are 14 bits, stored as 16 bits with the 2
+ * least significant bits always 0.
+ */
+ *val = (short)ret >> 2;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ *val2 = da280_nscale;
+ return IIO_VAL_INT_PLUS_NANO;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct iio_info da280_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = da280_read_raw,
+};
+
+static int da280_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct iio_dev *indio_dev;
+ struct da280_data *data;
+
+ ret = i2c_smbus_read_byte_data(client, DA280_REG_CHIP_ID);
+ if (ret != DA280_CHIP_ID)
+ return (ret < 0) ? ret : -ENODEV;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ data->client = client;
+ i2c_set_clientdata(client, indio_dev);
+
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->info = &da280_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = da280_channels;
+ if (id->driver_data == da226) {
+ indio_dev->name = "da226";
+ indio_dev->num_channels = 2;
+ } else {
+ indio_dev->name = "da280";
+ indio_dev->num_channels = 3;
+ }
+
+ ret = da280_enable(client, true);
+ if (ret < 0)
+ return ret;
+
+ ret = iio_device_register(indio_dev);
+ if (ret < 0) {
+ dev_err(&client->dev, "device_register failed\n");
+ da280_enable(client, false);
+ }
+
+ return ret;
+}
+
+static int da280_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+ iio_device_unregister(indio_dev);
+
+ return da280_enable(client, false);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int da280_suspend(struct device *dev)
+{
+ return da280_enable(to_i2c_client(dev), false);
+}
+
+static int da280_resume(struct device *dev)
+{
+ return da280_enable(to_i2c_client(dev), true);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(da280_pm_ops, da280_suspend, da280_resume);
+
+static const struct i2c_device_id da280_i2c_id[] = {
+ { "da226", da226 },
+ { "da280", da280 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, da280_i2c_id);
+
+static struct i2c_driver da280_driver = {
+ .driver = {
+ .name = "da280",
+ .pm = &da280_pm_ops,
+ },
+ .probe = da280_probe,
+ .remove = da280_remove,
+ .id_table = da280_i2c_id,
+};
+
+module_i2c_driver(da280_driver);
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("MiraMEMS DA280 3-Axis Accelerometer driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/da311.c b/drivers/iio/accel/da311.c
new file mode 100644
index 000000000000..537cfa8b6edf
--- /dev/null
+++ b/drivers/iio/accel/da311.c
@@ -0,0 +1,305 @@
+/**
+ * IIO driver for the MiraMEMS DA311 3-axis accelerometer
+ *
+ * Copyright (c) 2016 Hans de Goede <hdegoede@redhat.com>
+ * Copyright (c) 2011-2013 MiraMEMS Sensing Technology Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/byteorder/generic.h>
+
+#define DA311_CHIP_ID 0x13
+
+/*
+ * Note register addressed go from 0 - 0x3f and then wrap.
+ * For some reason there are 2 banks with 0 - 0x3f addresses,
+ * rather then a single 0-0x7f bank.
+ */
+
+/* Bank 0 regs */
+#define DA311_REG_BANK 0x0000
+#define DA311_REG_LDO_REG 0x0006
+#define DA311_REG_CHIP_ID 0x000f
+#define DA311_REG_TEMP_CFG_REG 0x001f
+#define DA311_REG_CTRL_REG1 0x0020
+#define DA311_REG_CTRL_REG3 0x0022
+#define DA311_REG_CTRL_REG4 0x0023
+#define DA311_REG_CTRL_REG5 0x0024
+#define DA311_REG_CTRL_REG6 0x0025
+#define DA311_REG_STATUS_REG 0x0027
+#define DA311_REG_OUT_X_L 0x0028
+#define DA311_REG_OUT_X_H 0x0029
+#define DA311_REG_OUT_Y_L 0x002a
+#define DA311_REG_OUT_Y_H 0x002b
+#define DA311_REG_OUT_Z_L 0x002c
+#define DA311_REG_OUT_Z_H 0x002d
+#define DA311_REG_INT1_CFG 0x0030
+#define DA311_REG_INT1_SRC 0x0031
+#define DA311_REG_INT1_THS 0x0032
+#define DA311_REG_INT1_DURATION 0x0033
+#define DA311_REG_INT2_CFG 0x0034
+#define DA311_REG_INT2_SRC 0x0035
+#define DA311_REG_INT2_THS 0x0036
+#define DA311_REG_INT2_DURATION 0x0037
+#define DA311_REG_CLICK_CFG 0x0038
+#define DA311_REG_CLICK_SRC 0x0039
+#define DA311_REG_CLICK_THS 0x003a
+#define DA311_REG_TIME_LIMIT 0x003b
+#define DA311_REG_TIME_LATENCY 0x003c
+#define DA311_REG_TIME_WINDOW 0x003d
+
+/* Bank 1 regs */
+#define DA311_REG_SOFT_RESET 0x0105
+#define DA311_REG_OTP_XOFF_L 0x0110
+#define DA311_REG_OTP_XOFF_H 0x0111
+#define DA311_REG_OTP_YOFF_L 0x0112
+#define DA311_REG_OTP_YOFF_H 0x0113
+#define DA311_REG_OTP_ZOFF_L 0x0114
+#define DA311_REG_OTP_ZOFF_H 0x0115
+#define DA311_REG_OTP_XSO 0x0116
+#define DA311_REG_OTP_YSO 0x0117
+#define DA311_REG_OTP_ZSO 0x0118
+#define DA311_REG_OTP_TRIM_OSC 0x011b
+#define DA311_REG_LPF_ABSOLUTE 0x011c
+#define DA311_REG_TEMP_OFF1 0x0127
+#define DA311_REG_TEMP_OFF2 0x0128
+#define DA311_REG_TEMP_OFF3 0x0129
+#define DA311_REG_OTP_TRIM_THERM_H 0x011a
+
+/*
+ * a value of + or -1024 corresponds to + or - 1G
+ * scale = 9.81 / 1024 = 0.009580078
+ */
+
+static const int da311_nscale = 9580078;
+
+#define DA311_CHANNEL(reg, axis) { \
+ .type = IIO_ACCEL, \
+ .address = reg, \
+ .modified = 1, \
+ .channel2 = IIO_MOD_##axis, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+}
+
+static const struct iio_chan_spec da311_channels[] = {
+ /* | 0x80 comes from the android driver */
+ DA311_CHANNEL(DA311_REG_OUT_X_L | 0x80, X),
+ DA311_CHANNEL(DA311_REG_OUT_Y_L | 0x80, Y),
+ DA311_CHANNEL(DA311_REG_OUT_Z_L | 0x80, Z),
+};
+
+struct da311_data {
+ struct i2c_client *client;
+};
+
+static int da311_register_mask_write(struct i2c_client *client, u16 addr,
+ u8 mask, u8 data)
+{
+ int ret;
+ u8 tmp_data = 0;
+
+ if (addr & 0xff00) {
+ /* Select bank 1 */
+ ret = i2c_smbus_write_byte_data(client, DA311_REG_BANK, 0x01);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (mask != 0xff) {
+ ret = i2c_smbus_read_byte_data(client, addr);
+ if (ret < 0)
+ return ret;
+ tmp_data = ret;
+ }
+
+ tmp_data &= ~mask;
+ tmp_data |= data & mask;
+ ret = i2c_smbus_write_byte_data(client, addr & 0xff, tmp_data);
+ if (ret < 0)
+ return ret;
+
+ if (addr & 0xff00) {
+ /* Back to bank 0 */
+ ret = i2c_smbus_write_byte_data(client, DA311_REG_BANK, 0x00);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+/* Init sequence taken from the android driver */
+static int da311_reset(struct i2c_client *client)
+{
+ const struct {
+ u16 addr;
+ u8 mask;
+ u8 data;
+ } init_data[] = {
+ { DA311_REG_TEMP_CFG_REG, 0xff, 0x08 },
+ { DA311_REG_CTRL_REG5, 0xff, 0x80 },
+ { DA311_REG_CTRL_REG4, 0x30, 0x00 },
+ { DA311_REG_CTRL_REG1, 0xff, 0x6f },
+ { DA311_REG_TEMP_CFG_REG, 0xff, 0x88 },
+ { DA311_REG_LDO_REG, 0xff, 0x02 },
+ { DA311_REG_OTP_TRIM_OSC, 0xff, 0x27 },
+ { DA311_REG_LPF_ABSOLUTE, 0xff, 0x30 },
+ { DA311_REG_TEMP_OFF1, 0xff, 0x3f },
+ { DA311_REG_TEMP_OFF2, 0xff, 0xff },
+ { DA311_REG_TEMP_OFF3, 0xff, 0x0f },
+ };
+ int i, ret;
+
+ /* Reset */
+ ret = da311_register_mask_write(client, DA311_REG_SOFT_RESET,
+ 0xff, 0xaa);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < ARRAY_SIZE(init_data); i++) {
+ ret = da311_register_mask_write(client,
+ init_data[i].addr,
+ init_data[i].mask,
+ init_data[i].data);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int da311_enable(struct i2c_client *client, bool enable)
+{
+ u8 data = enable ? 0x00 : 0x20;
+
+ return da311_register_mask_write(client, DA311_REG_TEMP_CFG_REG,
+ 0x20, data);
+}
+
+static int da311_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct da311_data *data = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ ret = i2c_smbus_read_word_data(data->client, chan->address);
+ if (ret < 0)
+ return ret;
+ /*
+ * Values are 12 bits, stored as 16 bits with the 4
+ * least significant bits always 0.
+ */
+ *val = (short)ret >> 4;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ *val2 = da311_nscale;
+ return IIO_VAL_INT_PLUS_NANO;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct iio_info da311_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = da311_read_raw,
+};
+
+static int da311_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct iio_dev *indio_dev;
+ struct da311_data *data;
+
+ ret = i2c_smbus_read_byte_data(client, DA311_REG_CHIP_ID);
+ if (ret != DA311_CHIP_ID)
+ return (ret < 0) ? ret : -ENODEV;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ data->client = client;
+ i2c_set_clientdata(client, indio_dev);
+
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->info = &da311_info;
+ indio_dev->name = "da311";
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = da311_channels;
+ indio_dev->num_channels = ARRAY_SIZE(da311_channels);
+
+ ret = da311_reset(client);
+ if (ret < 0)
+ return ret;
+
+ ret = da311_enable(client, true);
+ if (ret < 0)
+ return ret;
+
+ ret = iio_device_register(indio_dev);
+ if (ret < 0) {
+ dev_err(&client->dev, "device_register failed\n");
+ da311_enable(client, false);
+ }
+
+ return ret;
+}
+
+static int da311_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+ iio_device_unregister(indio_dev);
+
+ return da311_enable(client, false);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int da311_suspend(struct device *dev)
+{
+ return da311_enable(to_i2c_client(dev), false);
+}
+
+static int da311_resume(struct device *dev)
+{
+ return da311_enable(to_i2c_client(dev), true);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(da311_pm_ops, da311_suspend, da311_resume);
+
+static const struct i2c_device_id da311_i2c_id[] = {
+ {"da311", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, da311_i2c_id);
+
+static struct i2c_driver da311_driver = {
+ .driver = {
+ .name = "da311",
+ .pm = &da311_pm_ops,
+ },
+ .probe = da311_probe,
+ .remove = da311_remove,
+ .id_table = da311_i2c_id,
+};
+
+module_i2c_driver(da311_driver);
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("MiraMEMS DA311 3-Axis Accelerometer driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/dmard10.c b/drivers/iio/accel/dmard10.c
new file mode 100644
index 000000000000..b8736cc75656
--- /dev/null
+++ b/drivers/iio/accel/dmard10.c
@@ -0,0 +1,266 @@
+/**
+ * IIO driver for the 3-axis accelerometer Domintech ARD10.
+ *
+ * Copyright (c) 2016 Hans de Goede <hdegoede@redhat.com>
+ * Copyright (c) 2012 Domintech Technology Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/byteorder/generic.h>
+
+#define DMARD10_REG_ACTR 0x00
+#define DMARD10_REG_AFEM 0x0c
+#define DMARD10_REG_STADR 0x12
+#define DMARD10_REG_STAINT 0x1c
+#define DMARD10_REG_MISC2 0x1f
+#define DMARD10_REG_PD 0x21
+
+#define DMARD10_MODE_OFF 0x00
+#define DMARD10_MODE_STANDBY 0x02
+#define DMARD10_MODE_ACTIVE 0x06
+#define DMARD10_MODE_READ_OTP 0x12
+#define DMARD10_MODE_RESET_DATA_PATH 0x82
+
+/* AFEN set 1, ATM[2:0]=b'000 (normal), EN_Z/Y/X/T=1 */
+#define DMARD10_VALUE_AFEM_AFEN_NORMAL 0x8f
+/* ODR[3:0]=b'0111 (100Hz), CCK[3:0]=b'0100 (204.8kHZ) */
+#define DMARD10_VALUE_CKSEL_ODR_100_204 0x74
+/* INTC[6:5]=b'00 */
+#define DMARD10_VALUE_INTC 0x00
+/* TAP1/TAP2 Average 2 */
+#define DMARD10_VALUE_TAPNS_AVE_2 0x11
+
+#define DMARD10_VALUE_STADR 0x55
+#define DMARD10_VALUE_STAINT 0xaa
+#define DMARD10_VALUE_MISC2_OSCA_EN 0x08
+#define DMARD10_VALUE_PD_RST 0x52
+
+/* Offsets into the buffer read in dmard10_read_raw() */
+#define DMARD10_X_OFFSET 1
+#define DMARD10_Y_OFFSET 2
+#define DMARD10_Z_OFFSET 3
+
+/*
+ * a value of + or -128 corresponds to + or - 1G
+ * scale = 9.81 / 128 = 0.076640625
+ */
+
+static const int dmard10_nscale = 76640625;
+
+#define DMARD10_CHANNEL(reg, axis) { \
+ .type = IIO_ACCEL, \
+ .address = reg, \
+ .modified = 1, \
+ .channel2 = IIO_MOD_##axis, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+}
+
+static const struct iio_chan_spec dmard10_channels[] = {
+ DMARD10_CHANNEL(DMARD10_X_OFFSET, X),
+ DMARD10_CHANNEL(DMARD10_Y_OFFSET, Y),
+ DMARD10_CHANNEL(DMARD10_Z_OFFSET, Z),
+};
+
+struct dmard10_data {
+ struct i2c_client *client;
+};
+
+/* Init sequence taken from the android driver */
+static int dmard10_reset(struct i2c_client *client)
+{
+ unsigned char buffer[7];
+ int ret;
+
+ /* 1. Powerdown reset */
+ ret = i2c_smbus_write_byte_data(client, DMARD10_REG_PD,
+ DMARD10_VALUE_PD_RST);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * 2. ACTR => Standby mode => Download OTP to parameter reg =>
+ * Standby mode => Reset data path => Standby mode
+ */
+ buffer[0] = DMARD10_REG_ACTR;
+ buffer[1] = DMARD10_MODE_STANDBY;
+ buffer[2] = DMARD10_MODE_READ_OTP;
+ buffer[3] = DMARD10_MODE_STANDBY;
+ buffer[4] = DMARD10_MODE_RESET_DATA_PATH;
+ buffer[5] = DMARD10_MODE_STANDBY;
+ ret = i2c_master_send(client, buffer, 6);
+ if (ret < 0)
+ return ret;
+
+ /* 3. OSCA_EN = 1, TSTO = b'000 (INT1 = normal, TEST0 = normal) */
+ ret = i2c_smbus_write_byte_data(client, DMARD10_REG_MISC2,
+ DMARD10_VALUE_MISC2_OSCA_EN);
+ if (ret < 0)
+ return ret;
+
+ /* 4. AFEN = 1 (AFE will powerdown after ADC) */
+ buffer[0] = DMARD10_REG_AFEM;
+ buffer[1] = DMARD10_VALUE_AFEM_AFEN_NORMAL;
+ buffer[2] = DMARD10_VALUE_CKSEL_ODR_100_204;
+ buffer[3] = DMARD10_VALUE_INTC;
+ buffer[4] = DMARD10_VALUE_TAPNS_AVE_2;
+ buffer[5] = 0x00; /* DLYC, no delay timing */
+ buffer[6] = 0x07; /* INTD=1 push-pull, INTA=1 active high, AUTOT=1 */
+ ret = i2c_master_send(client, buffer, 7);
+ if (ret < 0)
+ return ret;
+
+ /* 5. Activation mode */
+ ret = i2c_smbus_write_byte_data(client, DMARD10_REG_ACTR,
+ DMARD10_MODE_ACTIVE);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+/* Shutdown sequence taken from the android driver */
+static int dmard10_shutdown(struct i2c_client *client)
+{
+ unsigned char buffer[3];
+
+ buffer[0] = DMARD10_REG_ACTR;
+ buffer[1] = DMARD10_MODE_STANDBY;
+ buffer[2] = DMARD10_MODE_OFF;
+
+ return i2c_master_send(client, buffer, 3);
+}
+
+static int dmard10_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct dmard10_data *data = iio_priv(indio_dev);
+ __le16 buf[4];
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ /*
+ * Read 8 bytes starting at the REG_STADR register, trying to
+ * read the individual X, Y, Z registers will always read 0.
+ */
+ ret = i2c_smbus_read_i2c_block_data(data->client,
+ DMARD10_REG_STADR,
+ sizeof(buf), (u8 *)buf);
+ if (ret < 0)
+ return ret;
+ ret = le16_to_cpu(buf[chan->address]);
+ *val = sign_extend32(ret, 12);
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ *val2 = dmard10_nscale;
+ return IIO_VAL_INT_PLUS_NANO;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct iio_info dmard10_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = dmard10_read_raw,
+};
+
+static int dmard10_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct iio_dev *indio_dev;
+ struct dmard10_data *data;
+
+ /* These 2 registers have special POR reset values used for id */
+ ret = i2c_smbus_read_byte_data(client, DMARD10_REG_STADR);
+ if (ret != DMARD10_VALUE_STADR)
+ return (ret < 0) ? ret : -ENODEV;
+
+ ret = i2c_smbus_read_byte_data(client, DMARD10_REG_STAINT);
+ if (ret != DMARD10_VALUE_STAINT)
+ return (ret < 0) ? ret : -ENODEV;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev) {
+ dev_err(&client->dev, "iio allocation failed!\n");
+ return -ENOMEM;
+ }
+
+ data = iio_priv(indio_dev);
+ data->client = client;
+ i2c_set_clientdata(client, indio_dev);
+
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->info = &dmard10_info;
+ indio_dev->name = "dmard10";
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = dmard10_channels;
+ indio_dev->num_channels = ARRAY_SIZE(dmard10_channels);
+
+ ret = dmard10_reset(client);
+ if (ret < 0)
+ return ret;
+
+ ret = iio_device_register(indio_dev);
+ if (ret < 0) {
+ dev_err(&client->dev, "device_register failed\n");
+ dmard10_shutdown(client);
+ }
+
+ return ret;
+}
+
+static int dmard10_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+ iio_device_unregister(indio_dev);
+
+ return dmard10_shutdown(client);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int dmard10_suspend(struct device *dev)
+{
+ return dmard10_shutdown(to_i2c_client(dev));
+}
+
+static int dmard10_resume(struct device *dev)
+{
+ return dmard10_reset(to_i2c_client(dev));
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(dmard10_pm_ops, dmard10_suspend, dmard10_resume);
+
+static const struct i2c_device_id dmard10_i2c_id[] = {
+ {"dmard10", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, dmard10_i2c_id);
+
+static struct i2c_driver dmard10_driver = {
+ .driver = {
+ .name = "dmard10",
+ .pm = &dmard10_pm_ops,
+ },
+ .probe = dmard10_probe,
+ .remove = dmard10_remove,
+ .id_table = dmard10_i2c_id,
+};
+
+module_i2c_driver(dmard10_driver);
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("Domintech ARD10 3-Axis Accelerometer driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/mma7660.c b/drivers/iio/accel/mma7660.c
index 03beadf14ad3..3a40774cca74 100644
--- a/drivers/iio/accel/mma7660.c
+++ b/drivers/iio/accel/mma7660.c
@@ -39,7 +39,7 @@
#define MMA7660_SCALE_AVAIL "0.467142857"
-const int mma7660_nscale = 467142857;
+static const int mma7660_nscale = 467142857;
#define MMA7660_CHANNEL(reg, axis) { \
.type = IIO_ACCEL, \
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index d41e1b588e68..f418c588af6a 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -459,12 +459,14 @@ static int mma8452_read_raw(struct iio_dev *indio_dev,
switch (mask) {
case IIO_CHAN_INFO_RAW:
- if (iio_buffer_enabled(indio_dev))
- return -EBUSY;
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
mutex_lock(&data->lock);
ret = mma8452_read(data, buffer);
mutex_unlock(&data->lock);
+ iio_device_release_direct_mode(indio_dev);
if (ret < 0)
return ret;
@@ -664,37 +666,46 @@ static int mma8452_write_raw(struct iio_dev *indio_dev,
struct mma8452_data *data = iio_priv(indio_dev);
int i, ret;
- if (iio_buffer_enabled(indio_dev))
- return -EBUSY;
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ:
i = mma8452_get_samp_freq_index(data, val, val2);
- if (i < 0)
- return i;
-
+ if (i < 0) {
+ ret = i;
+ break;
+ }
data->ctrl_reg1 &= ~MMA8452_CTRL_DR_MASK;
data->ctrl_reg1 |= i << MMA8452_CTRL_DR_SHIFT;
- return mma8452_change_config(data, MMA8452_CTRL_REG1,
- data->ctrl_reg1);
+ ret = mma8452_change_config(data, MMA8452_CTRL_REG1,
+ data->ctrl_reg1);
+ break;
case IIO_CHAN_INFO_SCALE:
i = mma8452_get_scale_index(data, val, val2);
- if (i < 0)
- return i;
+ if (i < 0) {
+ ret = i;
+ break;
+ }
data->data_cfg &= ~MMA8452_DATA_CFG_FS_MASK;
data->data_cfg |= i;
- return mma8452_change_config(data, MMA8452_DATA_CFG,
- data->data_cfg);
+ ret = mma8452_change_config(data, MMA8452_DATA_CFG,
+ data->data_cfg);
+ break;
case IIO_CHAN_INFO_CALIBBIAS:
- if (val < -128 || val > 127)
- return -EINVAL;
+ if (val < -128 || val > 127) {
+ ret = -EINVAL;
+ break;
+ }
- return mma8452_change_config(data,
- MMA8452_OFF_X + chan->scan_index,
- val);
+ ret = mma8452_change_config(data,
+ MMA8452_OFF_X + chan->scan_index,
+ val);
+ break;
case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
if (val == 0 && val2 == 0) {
@@ -703,23 +714,30 @@ static int mma8452_write_raw(struct iio_dev *indio_dev,
data->data_cfg |= MMA8452_DATA_CFG_HPF_MASK;
ret = mma8452_set_hp_filter_frequency(data, val, val2);
if (ret < 0)
- return ret;
+ break;
}
- return mma8452_change_config(data, MMA8452_DATA_CFG,
+ ret = mma8452_change_config(data, MMA8452_DATA_CFG,
data->data_cfg);
+ break;
case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
ret = mma8452_get_odr_index(data);
for (i = 0; i < ARRAY_SIZE(mma8452_os_ratio); i++) {
- if (mma8452_os_ratio[i][ret] == val)
- return mma8452_set_power_mode(data, i);
+ if (mma8452_os_ratio[i][ret] == val) {
+ ret = mma8452_set_power_mode(data, i);
+ break;
+ }
}
-
+ break;
default:
- return -EINVAL;
+ ret = -EINVAL;
+ break;
}
+
+ iio_device_release_direct_mode(indio_dev);
+ return ret;
}
static int mma8452_read_thresh(struct iio_dev *indio_dev,
@@ -1347,20 +1365,9 @@ static int mma8452_data_rdy_trigger_set_state(struct iio_trigger *trig,
return mma8452_change_config(data, MMA8452_CTRL_REG4, reg);
}
-static int mma8452_validate_device(struct iio_trigger *trig,
- struct iio_dev *indio_dev)
-{
- struct iio_dev *indio = iio_trigger_get_drvdata(trig);
-
- if (indio != indio_dev)
- return -EINVAL;
-
- return 0;
-}
-
static const struct iio_trigger_ops mma8452_trigger_ops = {
.set_trigger_state = mma8452_data_rdy_trigger_set_state,
- .validate_device = mma8452_validate_device,
+ .validate_device = iio_trigger_validate_own_device,
.owner = THIS_MODULE,
};
diff --git a/drivers/iio/accel/sca3000.c b/drivers/iio/accel/sca3000.c
new file mode 100644
index 000000000000..cb1d83fa19a0
--- /dev/null
+++ b/drivers/iio/accel/sca3000.c
@@ -0,0 +1,1576 @@
+/*
+ * sca3000_core.c -- support VTI sca3000 series accelerometers via SPI
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * Copyright (c) 2009 Jonathan Cameron <jic23@kernel.org>
+ *
+ * See industrialio/accels/sca3000.h for comments.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/fs.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/kfifo_buf.h>
+
+#define SCA3000_WRITE_REG(a) (((a) << 2) | 0x02)
+#define SCA3000_READ_REG(a) ((a) << 2)
+
+#define SCA3000_REG_REVID_ADDR 0x00
+#define SCA3000_REG_REVID_MAJOR_MASK GENMASK(8, 4)
+#define SCA3000_REG_REVID_MINOR_MASK GENMASK(3, 0)
+
+#define SCA3000_REG_STATUS_ADDR 0x02
+#define SCA3000_LOCKED BIT(5)
+#define SCA3000_EEPROM_CS_ERROR BIT(1)
+#define SCA3000_SPI_FRAME_ERROR BIT(0)
+
+/* All reads done using register decrement so no need to directly access LSBs */
+#define SCA3000_REG_X_MSB_ADDR 0x05
+#define SCA3000_REG_Y_MSB_ADDR 0x07
+#define SCA3000_REG_Z_MSB_ADDR 0x09
+
+#define SCA3000_REG_RING_OUT_ADDR 0x0f
+
+/* Temp read untested - the e05 doesn't have the sensor */
+#define SCA3000_REG_TEMP_MSB_ADDR 0x13
+
+#define SCA3000_REG_MODE_ADDR 0x14
+#define SCA3000_MODE_PROT_MASK 0x28
+#define SCA3000_REG_MODE_RING_BUF_ENABLE BIT(7)
+#define SCA3000_REG_MODE_RING_BUF_8BIT BIT(6)
+
+/*
+ * Free fall detection triggers an interrupt if the acceleration
+ * is below a threshold for equivalent of 25cm drop
+ */
+#define SCA3000_REG_MODE_FREE_FALL_DETECT BIT(4)
+#define SCA3000_REG_MODE_MEAS_MODE_NORMAL 0x00
+#define SCA3000_REG_MODE_MEAS_MODE_OP_1 0x01
+#define SCA3000_REG_MODE_MEAS_MODE_OP_2 0x02
+
+/*
+ * In motion detection mode the accelerations are band pass filtered
+ * (approx 1 - 25Hz) and then a programmable threshold used to trigger
+ * and interrupt.
+ */
+#define SCA3000_REG_MODE_MEAS_MODE_MOT_DET 0x03
+#define SCA3000_REG_MODE_MODE_MASK 0x03
+
+#define SCA3000_REG_BUF_COUNT_ADDR 0x15
+
+#define SCA3000_REG_INT_STATUS_ADDR 0x16
+#define SCA3000_REG_INT_STATUS_THREE_QUARTERS BIT(7)
+#define SCA3000_REG_INT_STATUS_HALF BIT(6)
+
+#define SCA3000_INT_STATUS_FREE_FALL BIT(3)
+#define SCA3000_INT_STATUS_Y_TRIGGER BIT(2)
+#define SCA3000_INT_STATUS_X_TRIGGER BIT(1)
+#define SCA3000_INT_STATUS_Z_TRIGGER BIT(0)
+
+/* Used to allow access to multiplexed registers */
+#define SCA3000_REG_CTRL_SEL_ADDR 0x18
+/* Only available for SCA3000-D03 and SCA3000-D01 */
+#define SCA3000_REG_CTRL_SEL_I2C_DISABLE 0x01
+#define SCA3000_REG_CTRL_SEL_MD_CTRL 0x02
+#define SCA3000_REG_CTRL_SEL_MD_Y_TH 0x03
+#define SCA3000_REG_CTRL_SEL_MD_X_TH 0x04
+#define SCA3000_REG_CTRL_SEL_MD_Z_TH 0x05
+/*
+ * BE VERY CAREFUL WITH THIS, IF 3 BITS ARE NOT SET the device
+ * will not function
+ */
+#define SCA3000_REG_CTRL_SEL_OUT_CTRL 0x0B
+
+#define SCA3000_REG_OUT_CTRL_PROT_MASK 0xE0
+#define SCA3000_REG_OUT_CTRL_BUF_X_EN 0x10
+#define SCA3000_REG_OUT_CTRL_BUF_Y_EN 0x08
+#define SCA3000_REG_OUT_CTRL_BUF_Z_EN 0x04
+#define SCA3000_REG_OUT_CTRL_BUF_DIV_MASK 0x03
+#define SCA3000_REG_OUT_CTRL_BUF_DIV_4 0x02
+#define SCA3000_REG_OUT_CTRL_BUF_DIV_2 0x01
+
+
+/*
+ * Control which motion detector interrupts are on.
+ * For now only OR combinations are supported.
+ */
+#define SCA3000_MD_CTRL_PROT_MASK 0xC0
+#define SCA3000_MD_CTRL_OR_Y BIT(0)
+#define SCA3000_MD_CTRL_OR_X BIT(1)
+#define SCA3000_MD_CTRL_OR_Z BIT(2)
+/* Currently unsupported */
+#define SCA3000_MD_CTRL_AND_Y BIT(3)
+#define SCA3000_MD_CTRL_AND_X BIT(4)
+#define SAC3000_MD_CTRL_AND_Z BIT(5)
+
+/*
+ * Some control registers of complex access methods requiring this register to
+ * be used to remove a lock.
+ */
+#define SCA3000_REG_UNLOCK_ADDR 0x1e
+
+#define SCA3000_REG_INT_MASK_ADDR 0x21
+#define SCA3000_REG_INT_MASK_PROT_MASK 0x1C
+
+#define SCA3000_REG_INT_MASK_RING_THREE_QUARTER BIT(7)
+#define SCA3000_REG_INT_MASK_RING_HALF BIT(6)
+
+#define SCA3000_REG_INT_MASK_ALL_INTS 0x02
+#define SCA3000_REG_INT_MASK_ACTIVE_HIGH 0x01
+#define SCA3000_REG_INT_MASK_ACTIVE_LOW 0x00
+/* Values of multiplexed registers (write to ctrl_data after select) */
+#define SCA3000_REG_CTRL_DATA_ADDR 0x22
+
+/*
+ * Measurement modes available on some sca3000 series chips. Code assumes others
+ * may become available in the future.
+ *
+ * Bypass - Bypass the low-pass filter in the signal channel so as to increase
+ * signal bandwidth.
+ *
+ * Narrow - Narrow low-pass filtering of the signal channel and half output
+ * data rate by decimation.
+ *
+ * Wide - Widen low-pass filtering of signal channel to increase bandwidth
+ */
+#define SCA3000_OP_MODE_BYPASS 0x01
+#define SCA3000_OP_MODE_NARROW 0x02
+#define SCA3000_OP_MODE_WIDE 0x04
+#define SCA3000_MAX_TX 6
+#define SCA3000_MAX_RX 2
+
+/**
+ * struct sca3000_state - device instance state information
+ * @us: the associated spi device
+ * @info: chip variant information
+ * @last_timestamp: the timestamp of the last event
+ * @mo_det_use_count: reference counter for the motion detection unit
+ * @lock: lock used to protect elements of sca3000_state
+ * and the underlying device state.
+ * @tx: dma-able transmit buffer
+ * @rx: dma-able receive buffer
+ **/
+struct sca3000_state {
+ struct spi_device *us;
+ const struct sca3000_chip_info *info;
+ s64 last_timestamp;
+ int mo_det_use_count;
+ struct mutex lock;
+ /* Can these share a cacheline ? */
+ u8 rx[384] ____cacheline_aligned;
+ u8 tx[6] ____cacheline_aligned;
+};
+
+/**
+ * struct sca3000_chip_info - model dependent parameters
+ * @scale: scale * 10^-6
+ * @temp_output: some devices have temperature sensors.
+ * @measurement_mode_freq: normal mode sampling frequency
+ * @measurement_mode_3db_freq: 3db cutoff frequency of the low pass filter for
+ * the normal measurement mode.
+ * @option_mode_1: first optional mode. Not all models have one
+ * @option_mode_1_freq: option mode 1 sampling frequency
+ * @option_mode_1_3db_freq: 3db cutoff frequency of the low pass filter for
+ * the first option mode.
+ * @option_mode_2: second optional mode. Not all chips have one
+ * @option_mode_2_freq: option mode 2 sampling frequency
+ * @option_mode_2_3db_freq: 3db cutoff frequency of the low pass filter for
+ * the second option mode.
+ * @mod_det_mult_xz: Bit wise multipliers to calculate the threshold
+ * for motion detection in the x and z axis.
+ * @mod_det_mult_y: Bit wise multipliers to calculate the threshold
+ * for motion detection in the y axis.
+ *
+ * This structure is used to hold information about the functionality of a given
+ * sca3000 variant.
+ **/
+struct sca3000_chip_info {
+ unsigned int scale;
+ bool temp_output;
+ int measurement_mode_freq;
+ int measurement_mode_3db_freq;
+ int option_mode_1;
+ int option_mode_1_freq;
+ int option_mode_1_3db_freq;
+ int option_mode_2;
+ int option_mode_2_freq;
+ int option_mode_2_3db_freq;
+ int mot_det_mult_xz[6];
+ int mot_det_mult_y[7];
+};
+
+enum sca3000_variant {
+ d01,
+ e02,
+ e04,
+ e05,
+};
+
+/*
+ * Note where option modes are not defined, the chip simply does not
+ * support any.
+ * Other chips in the sca3000 series use i2c and are not included here.
+ *
+ * Some of these devices are only listed in the family data sheet and
+ * do not actually appear to be available.
+ */
+static const struct sca3000_chip_info sca3000_spi_chip_info_tbl[] = {
+ [d01] = {
+ .scale = 7357,
+ .temp_output = true,
+ .measurement_mode_freq = 250,
+ .measurement_mode_3db_freq = 45,
+ .option_mode_1 = SCA3000_OP_MODE_BYPASS,
+ .option_mode_1_freq = 250,
+ .option_mode_1_3db_freq = 70,
+ .mot_det_mult_xz = {50, 100, 200, 350, 650, 1300},
+ .mot_det_mult_y = {50, 100, 150, 250, 450, 850, 1750},
+ },
+ [e02] = {
+ .scale = 9810,
+ .measurement_mode_freq = 125,
+ .measurement_mode_3db_freq = 40,
+ .option_mode_1 = SCA3000_OP_MODE_NARROW,
+ .option_mode_1_freq = 63,
+ .option_mode_1_3db_freq = 11,
+ .mot_det_mult_xz = {100, 150, 300, 550, 1050, 2050},
+ .mot_det_mult_y = {50, 100, 200, 350, 700, 1350, 2700},
+ },
+ [e04] = {
+ .scale = 19620,
+ .measurement_mode_freq = 100,
+ .measurement_mode_3db_freq = 38,
+ .option_mode_1 = SCA3000_OP_MODE_NARROW,
+ .option_mode_1_freq = 50,
+ .option_mode_1_3db_freq = 9,
+ .option_mode_2 = SCA3000_OP_MODE_WIDE,
+ .option_mode_2_freq = 400,
+ .option_mode_2_3db_freq = 70,
+ .mot_det_mult_xz = {200, 300, 600, 1100, 2100, 4100},
+ .mot_det_mult_y = {100, 200, 400, 7000, 1400, 2700, 54000},
+ },
+ [e05] = {
+ .scale = 61313,
+ .measurement_mode_freq = 200,
+ .measurement_mode_3db_freq = 60,
+ .option_mode_1 = SCA3000_OP_MODE_NARROW,
+ .option_mode_1_freq = 50,
+ .option_mode_1_3db_freq = 9,
+ .option_mode_2 = SCA3000_OP_MODE_WIDE,
+ .option_mode_2_freq = 400,
+ .option_mode_2_3db_freq = 75,
+ .mot_det_mult_xz = {600, 900, 1700, 3200, 6100, 11900},
+ .mot_det_mult_y = {300, 600, 1200, 2000, 4100, 7800, 15600},
+ },
+};
+
+static int sca3000_write_reg(struct sca3000_state *st, u8 address, u8 val)
+{
+ st->tx[0] = SCA3000_WRITE_REG(address);
+ st->tx[1] = val;
+ return spi_write(st->us, st->tx, 2);
+}
+
+static int sca3000_read_data_short(struct sca3000_state *st,
+ u8 reg_address_high,
+ int len)
+{
+ struct spi_transfer xfer[2] = {
+ {
+ .len = 1,
+ .tx_buf = st->tx,
+ }, {
+ .len = len,
+ .rx_buf = st->rx,
+ }
+ };
+ st->tx[0] = SCA3000_READ_REG(reg_address_high);
+
+ return spi_sync_transfer(st->us, xfer, ARRAY_SIZE(xfer));
+}
+
+/**
+ * sca3000_reg_lock_on() - test if the ctrl register lock is on
+ * @st: Driver specific device instance data.
+ *
+ * Lock must be held.
+ **/
+static int sca3000_reg_lock_on(struct sca3000_state *st)
+{
+ int ret;
+
+ ret = sca3000_read_data_short(st, SCA3000_REG_STATUS_ADDR, 1);
+ if (ret < 0)
+ return ret;
+
+ return !(st->rx[0] & SCA3000_LOCKED);
+}
+
+/**
+ * __sca3000_unlock_reg_lock() - unlock the control registers
+ * @st: Driver specific device instance data.
+ *
+ * Note the device does not appear to support doing this in a single transfer.
+ * This should only ever be used as part of ctrl reg read.
+ * Lock must be held before calling this
+ */
+static int __sca3000_unlock_reg_lock(struct sca3000_state *st)
+{
+ struct spi_transfer xfer[3] = {
+ {
+ .len = 2,
+ .cs_change = 1,
+ .tx_buf = st->tx,
+ }, {
+ .len = 2,
+ .cs_change = 1,
+ .tx_buf = st->tx + 2,
+ }, {
+ .len = 2,
+ .tx_buf = st->tx + 4,
+ },
+ };
+ st->tx[0] = SCA3000_WRITE_REG(SCA3000_REG_UNLOCK_ADDR);
+ st->tx[1] = 0x00;
+ st->tx[2] = SCA3000_WRITE_REG(SCA3000_REG_UNLOCK_ADDR);
+ st->tx[3] = 0x50;
+ st->tx[4] = SCA3000_WRITE_REG(SCA3000_REG_UNLOCK_ADDR);
+ st->tx[5] = 0xA0;
+
+ return spi_sync_transfer(st->us, xfer, ARRAY_SIZE(xfer));
+}
+
+/**
+ * sca3000_write_ctrl_reg() write to a lock protect ctrl register
+ * @st: Driver specific device instance data.
+ * @sel: selects which registers we wish to write to
+ * @val: the value to be written
+ *
+ * Certain control registers are protected against overwriting by the lock
+ * register and use a shared write address. This function allows writing of
+ * these registers.
+ * Lock must be held.
+ */
+static int sca3000_write_ctrl_reg(struct sca3000_state *st,
+ u8 sel,
+ uint8_t val)
+{
+ int ret;
+
+ ret = sca3000_reg_lock_on(st);
+ if (ret < 0)
+ goto error_ret;
+ if (ret) {
+ ret = __sca3000_unlock_reg_lock(st);
+ if (ret)
+ goto error_ret;
+ }
+
+ /* Set the control select register */
+ ret = sca3000_write_reg(st, SCA3000_REG_CTRL_SEL_ADDR, sel);
+ if (ret)
+ goto error_ret;
+
+ /* Write the actual value into the register */
+ ret = sca3000_write_reg(st, SCA3000_REG_CTRL_DATA_ADDR, val);
+
+error_ret:
+ return ret;
+}
+
+/**
+ * sca3000_read_ctrl_reg() read from lock protected control register.
+ * @st: Driver specific device instance data.
+ * @ctrl_reg: Which ctrl register do we want to read.
+ *
+ * Lock must be held.
+ */
+static int sca3000_read_ctrl_reg(struct sca3000_state *st,
+ u8 ctrl_reg)
+{
+ int ret;
+
+ ret = sca3000_reg_lock_on(st);
+ if (ret < 0)
+ goto error_ret;
+ if (ret) {
+ ret = __sca3000_unlock_reg_lock(st);
+ if (ret)
+ goto error_ret;
+ }
+ /* Set the control select register */
+ ret = sca3000_write_reg(st, SCA3000_REG_CTRL_SEL_ADDR, ctrl_reg);
+ if (ret)
+ goto error_ret;
+ ret = sca3000_read_data_short(st, SCA3000_REG_CTRL_DATA_ADDR, 1);
+ if (ret)
+ goto error_ret;
+ return st->rx[0];
+error_ret:
+ return ret;
+}
+
+/**
+ * sca3000_show_rev() - sysfs interface to read the chip revision number
+ * @indio_dev: Device instance specific generic IIO data.
+ * Driver specific device instance data can be obtained via
+ * via iio_priv(indio_dev)
+ */
+static int sca3000_print_rev(struct iio_dev *indio_dev)
+{
+ int ret;
+ struct sca3000_state *st = iio_priv(indio_dev);
+
+ mutex_lock(&st->lock);
+ ret = sca3000_read_data_short(st, SCA3000_REG_REVID_ADDR, 1);
+ if (ret < 0)
+ goto error_ret;
+ dev_info(&indio_dev->dev,
+ "sca3000 revision major=%lu, minor=%lu\n",
+ st->rx[0] & SCA3000_REG_REVID_MAJOR_MASK,
+ st->rx[0] & SCA3000_REG_REVID_MINOR_MASK);
+error_ret:
+ mutex_unlock(&st->lock);
+
+ return ret;
+}
+
+static ssize_t
+sca3000_show_available_3db_freqs(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct sca3000_state *st = iio_priv(indio_dev);
+ int len;
+
+ len = sprintf(buf, "%d", st->info->measurement_mode_3db_freq);
+ if (st->info->option_mode_1)
+ len += sprintf(buf + len, " %d",
+ st->info->option_mode_1_3db_freq);
+ if (st->info->option_mode_2)
+ len += sprintf(buf + len, " %d",
+ st->info->option_mode_2_3db_freq);
+ len += sprintf(buf + len, "\n");
+
+ return len;
+}
+
+static IIO_DEVICE_ATTR(in_accel_filter_low_pass_3db_frequency_available,
+ S_IRUGO, sca3000_show_available_3db_freqs,
+ NULL, 0);
+
+static const struct iio_event_spec sca3000_event = {
+ .type = IIO_EV_TYPE_MAG,
+ .dir = IIO_EV_DIR_RISING,
+ .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE),
+};
+
+/*
+ * Note the hack in the number of bits to pretend we have 2 more than
+ * we do in the fifo.
+ */
+#define SCA3000_CHAN(index, mod) \
+ { \
+ .type = IIO_ACCEL, \
+ .modified = 1, \
+ .channel2 = mod, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |\
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),\
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\
+ .address = index, \
+ .scan_index = index, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 13, \
+ .storagebits = 16, \
+ .shift = 3, \
+ .endianness = IIO_BE, \
+ }, \
+ .event_spec = &sca3000_event, \
+ .num_event_specs = 1, \
+ }
+
+static const struct iio_event_spec sca3000_freefall_event_spec = {
+ .type = IIO_EV_TYPE_MAG,
+ .dir = IIO_EV_DIR_FALLING,
+ .mask_separate = BIT(IIO_EV_INFO_ENABLE) |
+ BIT(IIO_EV_INFO_PERIOD),
+};
+
+static const struct iio_chan_spec sca3000_channels[] = {
+ SCA3000_CHAN(0, IIO_MOD_X),
+ SCA3000_CHAN(1, IIO_MOD_Y),
+ SCA3000_CHAN(2, IIO_MOD_Z),
+ {
+ .type = IIO_ACCEL,
+ .modified = 1,
+ .channel2 = IIO_MOD_X_AND_Y_AND_Z,
+ .scan_index = -1, /* Fake channel */
+ .event_spec = &sca3000_freefall_event_spec,
+ .num_event_specs = 1,
+ },
+};
+
+static const struct iio_chan_spec sca3000_channels_with_temp[] = {
+ SCA3000_CHAN(0, IIO_MOD_X),
+ SCA3000_CHAN(1, IIO_MOD_Y),
+ SCA3000_CHAN(2, IIO_MOD_Z),
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_OFFSET),
+ /* No buffer support */
+ .scan_index = -1,
+ },
+ {
+ .type = IIO_ACCEL,
+ .modified = 1,
+ .channel2 = IIO_MOD_X_AND_Y_AND_Z,
+ .scan_index = -1, /* Fake channel */
+ .event_spec = &sca3000_freefall_event_spec,
+ .num_event_specs = 1,
+ },
+};
+
+static u8 sca3000_addresses[3][3] = {
+ [0] = {SCA3000_REG_X_MSB_ADDR, SCA3000_REG_CTRL_SEL_MD_X_TH,
+ SCA3000_MD_CTRL_OR_X},
+ [1] = {SCA3000_REG_Y_MSB_ADDR, SCA3000_REG_CTRL_SEL_MD_Y_TH,
+ SCA3000_MD_CTRL_OR_Y},
+ [2] = {SCA3000_REG_Z_MSB_ADDR, SCA3000_REG_CTRL_SEL_MD_Z_TH,
+ SCA3000_MD_CTRL_OR_Z},
+};
+
+/**
+ * __sca3000_get_base_freq() - obtain mode specific base frequency
+ * @st: Private driver specific device instance specific state.
+ * @info: chip type specific information.
+ * @base_freq: Base frequency for the current measurement mode.
+ *
+ * lock must be held
+ */
+static inline int __sca3000_get_base_freq(struct sca3000_state *st,
+ const struct sca3000_chip_info *info,
+ int *base_freq)
+{
+ int ret;
+
+ ret = sca3000_read_data_short(st, SCA3000_REG_MODE_ADDR, 1);
+ if (ret)
+ goto error_ret;
+ switch (SCA3000_REG_MODE_MODE_MASK & st->rx[0]) {
+ case SCA3000_REG_MODE_MEAS_MODE_NORMAL:
+ *base_freq = info->measurement_mode_freq;
+ break;
+ case SCA3000_REG_MODE_MEAS_MODE_OP_1:
+ *base_freq = info->option_mode_1_freq;
+ break;
+ case SCA3000_REG_MODE_MEAS_MODE_OP_2:
+ *base_freq = info->option_mode_2_freq;
+ break;
+ default:
+ ret = -EINVAL;
+ }
+error_ret:
+ return ret;
+}
+
+/**
+ * sca3000_read_raw_samp_freq() - read_raw handler for IIO_CHAN_INFO_SAMP_FREQ
+ * @st: Private driver specific device instance specific state.
+ * @val: The frequency read back.
+ *
+ * lock must be held
+ **/
+static int sca3000_read_raw_samp_freq(struct sca3000_state *st, int *val)
+{
+ int ret;
+
+ ret = __sca3000_get_base_freq(st, st->info, val);
+ if (ret)
+ return ret;
+
+ ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL);
+ if (ret < 0)
+ return ret;
+
+ if (*val > 0) {
+ ret &= SCA3000_REG_OUT_CTRL_BUF_DIV_MASK;
+ switch (ret) {
+ case SCA3000_REG_OUT_CTRL_BUF_DIV_2:
+ *val /= 2;
+ break;
+ case SCA3000_REG_OUT_CTRL_BUF_DIV_4:
+ *val /= 4;
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * sca3000_write_raw_samp_freq() - write_raw handler for IIO_CHAN_INFO_SAMP_FREQ
+ * @st: Private driver specific device instance specific state.
+ * @val: The frequency desired.
+ *
+ * lock must be held
+ */
+static int sca3000_write_raw_samp_freq(struct sca3000_state *st, int val)
+{
+ int ret, base_freq, ctrlval;
+
+ ret = __sca3000_get_base_freq(st, st->info, &base_freq);
+ if (ret)
+ return ret;
+
+ ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL);
+ if (ret < 0)
+ return ret;
+
+ ctrlval = ret & ~SCA3000_REG_OUT_CTRL_BUF_DIV_MASK;
+
+ if (val == base_freq / 2)
+ ctrlval |= SCA3000_REG_OUT_CTRL_BUF_DIV_2;
+ if (val == base_freq / 4)
+ ctrlval |= SCA3000_REG_OUT_CTRL_BUF_DIV_4;
+ else if (val != base_freq)
+ return -EINVAL;
+
+ return sca3000_write_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL,
+ ctrlval);
+}
+
+static int sca3000_read_3db_freq(struct sca3000_state *st, int *val)
+{
+ int ret;
+
+ ret = sca3000_read_data_short(st, SCA3000_REG_MODE_ADDR, 1);
+ if (ret)
+ return ret;
+
+ /* mask bottom 2 bits - only ones that are relevant */
+ st->rx[0] &= SCA3000_REG_MODE_MODE_MASK;
+ switch (st->rx[0]) {
+ case SCA3000_REG_MODE_MEAS_MODE_NORMAL:
+ *val = st->info->measurement_mode_3db_freq;
+ return IIO_VAL_INT;
+ case SCA3000_REG_MODE_MEAS_MODE_MOT_DET:
+ return -EBUSY;
+ case SCA3000_REG_MODE_MEAS_MODE_OP_1:
+ *val = st->info->option_mode_1_3db_freq;
+ return IIO_VAL_INT;
+ case SCA3000_REG_MODE_MEAS_MODE_OP_2:
+ *val = st->info->option_mode_2_3db_freq;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int sca3000_write_3db_freq(struct sca3000_state *st, int val)
+{
+ int ret;
+ int mode;
+
+ if (val == st->info->measurement_mode_3db_freq)
+ mode = SCA3000_REG_MODE_MEAS_MODE_NORMAL;
+ else if (st->info->option_mode_1 &&
+ (val == st->info->option_mode_1_3db_freq))
+ mode = SCA3000_REG_MODE_MEAS_MODE_OP_1;
+ else if (st->info->option_mode_2 &&
+ (val == st->info->option_mode_2_3db_freq))
+ mode = SCA3000_REG_MODE_MEAS_MODE_OP_2;
+ else
+ return -EINVAL;
+ ret = sca3000_read_data_short(st, SCA3000_REG_MODE_ADDR, 1);
+ if (ret)
+ return ret;
+
+ st->rx[0] &= ~SCA3000_REG_MODE_MODE_MASK;
+ st->rx[0] |= (mode & SCA3000_REG_MODE_MODE_MASK);
+
+ return sca3000_write_reg(st, SCA3000_REG_MODE_ADDR, st->rx[0]);
+}
+
+static int sca3000_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long mask)
+{
+ struct sca3000_state *st = iio_priv(indio_dev);
+ int ret;
+ u8 address;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&st->lock);
+ if (chan->type == IIO_ACCEL) {
+ if (st->mo_det_use_count) {
+ mutex_unlock(&st->lock);
+ return -EBUSY;
+ }
+ address = sca3000_addresses[chan->address][0];
+ ret = sca3000_read_data_short(st, address, 2);
+ if (ret < 0) {
+ mutex_unlock(&st->lock);
+ return ret;
+ }
+ *val = (be16_to_cpup((__be16 *)st->rx) >> 3) & 0x1FFF;
+ *val = ((*val) << (sizeof(*val) * 8 - 13)) >>
+ (sizeof(*val) * 8 - 13);
+ } else {
+ /* get the temperature when available */
+ ret = sca3000_read_data_short(st,
+ SCA3000_REG_TEMP_MSB_ADDR,
+ 2);
+ if (ret < 0) {
+ mutex_unlock(&st->lock);
+ return ret;
+ }
+ *val = ((st->rx[0] & 0x3F) << 3) |
+ ((st->rx[1] & 0xE0) >> 5);
+ }
+ mutex_unlock(&st->lock);
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ if (chan->type == IIO_ACCEL)
+ *val2 = st->info->scale;
+ else /* temperature */
+ *val2 = 555556;
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_CHAN_INFO_OFFSET:
+ *val = -214;
+ *val2 = 600000;
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ mutex_lock(&st->lock);
+ ret = sca3000_read_raw_samp_freq(st, val);
+ mutex_unlock(&st->lock);
+ return ret ? ret : IIO_VAL_INT;
+ case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+ mutex_lock(&st->lock);
+ ret = sca3000_read_3db_freq(st, val);
+ mutex_unlock(&st->lock);
+ return ret;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int sca3000_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct sca3000_state *st = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ if (val2)
+ return -EINVAL;
+ mutex_lock(&st->lock);
+ ret = sca3000_write_raw_samp_freq(st, val);
+ mutex_unlock(&st->lock);
+ return ret;
+ case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+ if (val2)
+ return -EINVAL;
+ mutex_lock(&st->lock);
+ ret = sca3000_write_3db_freq(st, val);
+ mutex_unlock(&st->lock);
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+/**
+ * sca3000_read_av_freq() - sysfs function to get available frequencies
+ * @dev: Device structure for this device.
+ * @attr: Description of the attribute.
+ * @buf: Incoming string
+ *
+ * The later modes are only relevant to the ring buffer - and depend on current
+ * mode. Note that data sheet gives rather wide tolerances for these so integer
+ * division will give good enough answer and not all chips have them specified
+ * at all.
+ **/
+static ssize_t sca3000_read_av_freq(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct sca3000_state *st = iio_priv(indio_dev);
+ int len = 0, ret, val;
+
+ mutex_lock(&st->lock);
+ ret = sca3000_read_data_short(st, SCA3000_REG_MODE_ADDR, 1);
+ val = st->rx[0];
+ mutex_unlock(&st->lock);
+ if (ret)
+ goto error_ret;
+
+ switch (val & SCA3000_REG_MODE_MODE_MASK) {
+ case SCA3000_REG_MODE_MEAS_MODE_NORMAL:
+ len += sprintf(buf + len, "%d %d %d\n",
+ st->info->measurement_mode_freq,
+ st->info->measurement_mode_freq / 2,
+ st->info->measurement_mode_freq / 4);
+ break;
+ case SCA3000_REG_MODE_MEAS_MODE_OP_1:
+ len += sprintf(buf + len, "%d %d %d\n",
+ st->info->option_mode_1_freq,
+ st->info->option_mode_1_freq / 2,
+ st->info->option_mode_1_freq / 4);
+ break;
+ case SCA3000_REG_MODE_MEAS_MODE_OP_2:
+ len += sprintf(buf + len, "%d %d %d\n",
+ st->info->option_mode_2_freq,
+ st->info->option_mode_2_freq / 2,
+ st->info->option_mode_2_freq / 4);
+ break;
+ }
+ return len;
+error_ret:
+ return ret;
+}
+
+/*
+ * Should only really be registered if ring buffer support is compiled in.
+ * Does no harm however and doing it right would add a fair bit of complexity
+ */
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(sca3000_read_av_freq);
+
+/**
+ * sca3000_read_event_value() - query of a threshold or period
+ **/
+static int sca3000_read_event_value(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int *val, int *val2)
+{
+ int ret, i;
+ struct sca3000_state *st = iio_priv(indio_dev);
+
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ mutex_lock(&st->lock);
+ ret = sca3000_read_ctrl_reg(st,
+ sca3000_addresses[chan->address][1]);
+ mutex_unlock(&st->lock);
+ if (ret < 0)
+ return ret;
+ *val = 0;
+ if (chan->channel2 == IIO_MOD_Y)
+ for_each_set_bit(i, (unsigned long *)&ret,
+ ARRAY_SIZE(st->info->mot_det_mult_y))
+ *val += st->info->mot_det_mult_y[i];
+ else
+ for_each_set_bit(i, (unsigned long *)&ret,
+ ARRAY_SIZE(st->info->mot_det_mult_xz))
+ *val += st->info->mot_det_mult_xz[i];
+
+ return IIO_VAL_INT;
+ case IIO_EV_INFO_PERIOD:
+ *val = 0;
+ *val2 = 226000;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+}
+
+/**
+ * sca3000_write_value() - control of threshold and period
+ * @indio_dev: Device instance specific IIO information.
+ * @chan: Description of the channel for which the event is being
+ * configured.
+ * @type: The type of event being configured, here magnitude rising
+ * as everything else is read only.
+ * @dir: Direction of the event (here rising)
+ * @info: What information about the event are we configuring.
+ * Here the threshold only.
+ * @val: Integer part of the value being written..
+ * @val2: Non integer part of the value being written. Here always 0.
+ */
+static int sca3000_write_event_value(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int val, int val2)
+{
+ struct sca3000_state *st = iio_priv(indio_dev);
+ int ret;
+ int i;
+ u8 nonlinear = 0;
+
+ if (chan->channel2 == IIO_MOD_Y) {
+ i = ARRAY_SIZE(st->info->mot_det_mult_y);
+ while (i > 0)
+ if (val >= st->info->mot_det_mult_y[--i]) {
+ nonlinear |= (1 << i);
+ val -= st->info->mot_det_mult_y[i];
+ }
+ } else {
+ i = ARRAY_SIZE(st->info->mot_det_mult_xz);
+ while (i > 0)
+ if (val >= st->info->mot_det_mult_xz[--i]) {
+ nonlinear |= (1 << i);
+ val -= st->info->mot_det_mult_xz[i];
+ }
+ }
+
+ mutex_lock(&st->lock);
+ ret = sca3000_write_ctrl_reg(st,
+ sca3000_addresses[chan->address][1],
+ nonlinear);
+ mutex_unlock(&st->lock);
+
+ return ret;
+}
+
+static struct attribute *sca3000_attributes[] = {
+ &iio_dev_attr_in_accel_filter_low_pass_3db_frequency_available.dev_attr.attr,
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group sca3000_attribute_group = {
+ .attrs = sca3000_attributes,
+};
+
+static int sca3000_read_data(struct sca3000_state *st,
+ u8 reg_address_high,
+ u8 *rx,
+ int len)
+{
+ int ret;
+ struct spi_transfer xfer[2] = {
+ {
+ .len = 1,
+ .tx_buf = st->tx,
+ }, {
+ .len = len,
+ .rx_buf = rx,
+ }
+ };
+
+ st->tx[0] = SCA3000_READ_REG(reg_address_high);
+ ret = spi_sync_transfer(st->us, xfer, ARRAY_SIZE(xfer));
+ if (ret) {
+ dev_err(get_device(&st->us->dev), "problem reading register");
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * sca3000_ring_int_process() - ring specific interrupt handling.
+ * @val: Value of the interrupt status register.
+ * @indio_dev: Device instance specific IIO device structure.
+ */
+static void sca3000_ring_int_process(u8 val, struct iio_dev *indio_dev)
+{
+ struct sca3000_state *st = iio_priv(indio_dev);
+ int ret, i, num_available;
+
+ mutex_lock(&st->lock);
+
+ if (val & SCA3000_REG_INT_STATUS_HALF) {
+ ret = sca3000_read_data_short(st, SCA3000_REG_BUF_COUNT_ADDR,
+ 1);
+ if (ret)
+ goto error_ret;
+ num_available = st->rx[0];
+ /*
+ * num_available is the total number of samples available
+ * i.e. number of time points * number of channels.
+ */
+ ret = sca3000_read_data(st, SCA3000_REG_RING_OUT_ADDR, st->rx,
+ num_available * 2);
+ if (ret)
+ goto error_ret;
+ for (i = 0; i < num_available / 3; i++) {
+ /*
+ * Dirty hack to cover for 11 bit in fifo, 13 bit
+ * direct reading.
+ *
+ * In theory the bottom two bits are undefined.
+ * In reality they appear to always be 0.
+ */
+ iio_push_to_buffers(indio_dev, st->rx + i * 3 * 2);
+ }
+ }
+error_ret:
+ mutex_unlock(&st->lock);
+}
+
+/**
+ * sca3000_event_handler() - handling ring and non ring events
+ * @irq: The irq being handled.
+ * @private: struct iio_device pointer for the device.
+ *
+ * Ring related interrupt handler. Depending on event, push to
+ * the ring buffer event chrdev or the event one.
+ *
+ * This function is complicated by the fact that the devices can signify ring
+ * and non ring events via the same interrupt line and they can only
+ * be distinguished via a read of the relevant status register.
+ */
+static irqreturn_t sca3000_event_handler(int irq, void *private)
+{
+ struct iio_dev *indio_dev = private;
+ struct sca3000_state *st = iio_priv(indio_dev);
+ int ret, val;
+ s64 last_timestamp = iio_get_time_ns(indio_dev);
+
+ /*
+ * Could lead if badly timed to an extra read of status reg,
+ * but ensures no interrupt is missed.
+ */
+ mutex_lock(&st->lock);
+ ret = sca3000_read_data_short(st, SCA3000_REG_INT_STATUS_ADDR, 1);
+ val = st->rx[0];
+ mutex_unlock(&st->lock);
+ if (ret)
+ goto done;
+
+ sca3000_ring_int_process(val, indio_dev);
+
+ if (val & SCA3000_INT_STATUS_FREE_FALL)
+ iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(IIO_ACCEL,
+ 0,
+ IIO_MOD_X_AND_Y_AND_Z,
+ IIO_EV_TYPE_MAG,
+ IIO_EV_DIR_FALLING),
+ last_timestamp);
+
+ if (val & SCA3000_INT_STATUS_Y_TRIGGER)
+ iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(IIO_ACCEL,
+ 0,
+ IIO_MOD_Y,
+ IIO_EV_TYPE_MAG,
+ IIO_EV_DIR_RISING),
+ last_timestamp);
+
+ if (val & SCA3000_INT_STATUS_X_TRIGGER)
+ iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(IIO_ACCEL,
+ 0,
+ IIO_MOD_X,
+ IIO_EV_TYPE_MAG,
+ IIO_EV_DIR_RISING),
+ last_timestamp);
+
+ if (val & SCA3000_INT_STATUS_Z_TRIGGER)
+ iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(IIO_ACCEL,
+ 0,
+ IIO_MOD_Z,
+ IIO_EV_TYPE_MAG,
+ IIO_EV_DIR_RISING),
+ last_timestamp);
+
+done:
+ return IRQ_HANDLED;
+}
+
+/**
+ * sca3000_read_event_config() what events are enabled
+ **/
+static int sca3000_read_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir)
+{
+ struct sca3000_state *st = iio_priv(indio_dev);
+ int ret;
+ /* read current value of mode register */
+ mutex_lock(&st->lock);
+
+ ret = sca3000_read_data_short(st, SCA3000_REG_MODE_ADDR, 1);
+ if (ret)
+ goto error_ret;
+
+ switch (chan->channel2) {
+ case IIO_MOD_X_AND_Y_AND_Z:
+ ret = !!(st->rx[0] & SCA3000_REG_MODE_FREE_FALL_DETECT);
+ break;
+ case IIO_MOD_X:
+ case IIO_MOD_Y:
+ case IIO_MOD_Z:
+ /*
+ * Motion detection mode cannot run at the same time as
+ * acceleration data being read.
+ */
+ if ((st->rx[0] & SCA3000_REG_MODE_MODE_MASK)
+ != SCA3000_REG_MODE_MEAS_MODE_MOT_DET) {
+ ret = 0;
+ } else {
+ ret = sca3000_read_ctrl_reg(st,
+ SCA3000_REG_CTRL_SEL_MD_CTRL);
+ if (ret < 0)
+ goto error_ret;
+ /* only supporting logical or's for now */
+ ret = !!(ret & sca3000_addresses[chan->address][2]);
+ }
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+error_ret:
+ mutex_unlock(&st->lock);
+
+ return ret;
+}
+
+static int sca3000_freefall_set_state(struct iio_dev *indio_dev, int state)
+{
+ struct sca3000_state *st = iio_priv(indio_dev);
+ int ret;
+
+ /* read current value of mode register */
+ ret = sca3000_read_data_short(st, SCA3000_REG_MODE_ADDR, 1);
+ if (ret)
+ return ret;
+
+ /* if off and should be on */
+ if (state && !(st->rx[0] & SCA3000_REG_MODE_FREE_FALL_DETECT))
+ return sca3000_write_reg(st, SCA3000_REG_MODE_ADDR,
+ st->rx[0] | SCA3000_REG_MODE_FREE_FALL_DETECT);
+ /* if on and should be off */
+ else if (!state && (st->rx[0] & SCA3000_REG_MODE_FREE_FALL_DETECT))
+ return sca3000_write_reg(st, SCA3000_REG_MODE_ADDR,
+ st->rx[0] & ~SCA3000_REG_MODE_FREE_FALL_DETECT);
+ else
+ return 0;
+}
+
+static int sca3000_motion_detect_set_state(struct iio_dev *indio_dev, int axis,
+ int state)
+{
+ struct sca3000_state *st = iio_priv(indio_dev);
+ int ret, ctrlval;
+
+ /*
+ * First read the motion detector config to find out if
+ * this axis is on
+ */
+ ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_MD_CTRL);
+ if (ret < 0)
+ return ret;
+ ctrlval = ret;
+ /* if off and should be on */
+ if (state && !(ctrlval & sca3000_addresses[axis][2])) {
+ ret = sca3000_write_ctrl_reg(st,
+ SCA3000_REG_CTRL_SEL_MD_CTRL,
+ ctrlval |
+ sca3000_addresses[axis][2]);
+ if (ret)
+ return ret;
+ st->mo_det_use_count++;
+ } else if (!state && (ctrlval & sca3000_addresses[axis][2])) {
+ ret = sca3000_write_ctrl_reg(st,
+ SCA3000_REG_CTRL_SEL_MD_CTRL,
+ ctrlval &
+ ~(sca3000_addresses[axis][2]));
+ if (ret)
+ return ret;
+ st->mo_det_use_count--;
+ }
+
+ /* read current value of mode register */
+ ret = sca3000_read_data_short(st, SCA3000_REG_MODE_ADDR, 1);
+ if (ret)
+ return ret;
+ /* if off and should be on */
+ if ((st->mo_det_use_count) &&
+ ((st->rx[0] & SCA3000_REG_MODE_MODE_MASK)
+ != SCA3000_REG_MODE_MEAS_MODE_MOT_DET))
+ return sca3000_write_reg(st, SCA3000_REG_MODE_ADDR,
+ (st->rx[0] & ~SCA3000_REG_MODE_MODE_MASK)
+ | SCA3000_REG_MODE_MEAS_MODE_MOT_DET);
+ /* if on and should be off */
+ else if (!(st->mo_det_use_count) &&
+ ((st->rx[0] & SCA3000_REG_MODE_MODE_MASK)
+ == SCA3000_REG_MODE_MEAS_MODE_MOT_DET))
+ return sca3000_write_reg(st, SCA3000_REG_MODE_ADDR,
+ st->rx[0] & SCA3000_REG_MODE_MODE_MASK);
+ else
+ return 0;
+}
+
+/**
+ * sca3000_write_event_config() - simple on off control for motion detector
+ * @indio_dev: IIO device instance specific structure. Data specific to this
+ * particular driver may be accessed via iio_priv(indio_dev).
+ * @chan: Description of the channel whose event we are configuring.
+ * @type: The type of event.
+ * @dir: The direction of the event.
+ * @state: Desired state of event being configured.
+ *
+ * This is a per axis control, but enabling any will result in the
+ * motion detector unit being enabled.
+ * N.B. enabling motion detector stops normal data acquisition.
+ * There is a complexity in knowing which mode to return to when
+ * this mode is disabled. Currently normal mode is assumed.
+ **/
+static int sca3000_write_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ int state)
+{
+ struct sca3000_state *st = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&st->lock);
+ switch (chan->channel2) {
+ case IIO_MOD_X_AND_Y_AND_Z:
+ ret = sca3000_freefall_set_state(indio_dev, state);
+ break;
+
+ case IIO_MOD_X:
+ case IIO_MOD_Y:
+ case IIO_MOD_Z:
+ ret = sca3000_motion_detect_set_state(indio_dev,
+ chan->address,
+ state);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ mutex_unlock(&st->lock);
+
+ return ret;
+}
+
+static int sca3000_configure_ring(struct iio_dev *indio_dev)
+{
+ struct iio_buffer *buffer;
+
+ buffer = iio_kfifo_allocate();
+ if (!buffer)
+ return -ENOMEM;
+
+ iio_device_attach_buffer(indio_dev, buffer);
+ indio_dev->modes |= INDIO_BUFFER_SOFTWARE;
+
+ return 0;
+}
+
+static void sca3000_unconfigure_ring(struct iio_dev *indio_dev)
+{
+ iio_kfifo_free(indio_dev->buffer);
+}
+
+static inline
+int __sca3000_hw_ring_state_set(struct iio_dev *indio_dev, bool state)
+{
+ struct sca3000_state *st = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&st->lock);
+ ret = sca3000_read_data_short(st, SCA3000_REG_MODE_ADDR, 1);
+ if (ret)
+ goto error_ret;
+ if (state) {
+ dev_info(&indio_dev->dev, "supposedly enabling ring buffer\n");
+ ret = sca3000_write_reg(st,
+ SCA3000_REG_MODE_ADDR,
+ (st->rx[0] | SCA3000_REG_MODE_RING_BUF_ENABLE));
+ } else
+ ret = sca3000_write_reg(st,
+ SCA3000_REG_MODE_ADDR,
+ (st->rx[0] & ~SCA3000_REG_MODE_RING_BUF_ENABLE));
+error_ret:
+ mutex_unlock(&st->lock);
+
+ return ret;
+}
+
+/**
+ * sca3000_hw_ring_preenable() - hw ring buffer preenable function
+ * @indio_dev: structure representing the IIO device. Device instance
+ * specific state can be accessed via iio_priv(indio_dev).
+ *
+ * Very simple enable function as the chip will allows normal reads
+ * during ring buffer operation so as long as it is indeed running
+ * before we notify the core, the precise ordering does not matter.
+ */
+static int sca3000_hw_ring_preenable(struct iio_dev *indio_dev)
+{
+ int ret;
+ struct sca3000_state *st = iio_priv(indio_dev);
+
+ mutex_lock(&st->lock);
+
+ /* Enable the 50% full interrupt */
+ ret = sca3000_read_data_short(st, SCA3000_REG_INT_MASK_ADDR, 1);
+ if (ret)
+ goto error_unlock;
+ ret = sca3000_write_reg(st,
+ SCA3000_REG_INT_MASK_ADDR,
+ st->rx[0] | SCA3000_REG_INT_MASK_RING_HALF);
+ if (ret)
+ goto error_unlock;
+
+ mutex_unlock(&st->lock);
+
+ return __sca3000_hw_ring_state_set(indio_dev, 1);
+
+error_unlock:
+ mutex_unlock(&st->lock);
+
+ return ret;
+}
+
+static int sca3000_hw_ring_postdisable(struct iio_dev *indio_dev)
+{
+ int ret;
+ struct sca3000_state *st = iio_priv(indio_dev);
+
+ ret = __sca3000_hw_ring_state_set(indio_dev, 0);
+ if (ret)
+ return ret;
+
+ /* Disable the 50% full interrupt */
+ mutex_lock(&st->lock);
+
+ ret = sca3000_read_data_short(st, SCA3000_REG_INT_MASK_ADDR, 1);
+ if (ret)
+ goto unlock;
+ ret = sca3000_write_reg(st,
+ SCA3000_REG_INT_MASK_ADDR,
+ st->rx[0] & ~SCA3000_REG_INT_MASK_RING_HALF);
+unlock:
+ mutex_unlock(&st->lock);
+ return ret;
+}
+
+static const struct iio_buffer_setup_ops sca3000_ring_setup_ops = {
+ .preenable = &sca3000_hw_ring_preenable,
+ .postdisable = &sca3000_hw_ring_postdisable,
+};
+
+/**
+ * sca3000_clean_setup() - get the device into a predictable state
+ * @st: Device instance specific private data structure
+ *
+ * Devices use flash memory to store many of the register values
+ * and hence can come up in somewhat unpredictable states.
+ * Hence reset everything on driver load.
+ */
+static int sca3000_clean_setup(struct sca3000_state *st)
+{
+ int ret;
+
+ mutex_lock(&st->lock);
+ /* Ensure all interrupts have been acknowledged */
+ ret = sca3000_read_data_short(st, SCA3000_REG_INT_STATUS_ADDR, 1);
+ if (ret)
+ goto error_ret;
+
+ /* Turn off all motion detection channels */
+ ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_MD_CTRL);
+ if (ret < 0)
+ goto error_ret;
+ ret = sca3000_write_ctrl_reg(st, SCA3000_REG_CTRL_SEL_MD_CTRL,
+ ret & SCA3000_MD_CTRL_PROT_MASK);
+ if (ret)
+ goto error_ret;
+
+ /* Disable ring buffer */
+ ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL);
+ if (ret < 0)
+ goto error_ret;
+ ret = sca3000_write_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL,
+ (ret & SCA3000_REG_OUT_CTRL_PROT_MASK)
+ | SCA3000_REG_OUT_CTRL_BUF_X_EN
+ | SCA3000_REG_OUT_CTRL_BUF_Y_EN
+ | SCA3000_REG_OUT_CTRL_BUF_Z_EN
+ | SCA3000_REG_OUT_CTRL_BUF_DIV_4);
+ if (ret)
+ goto error_ret;
+ /* Enable interrupts, relevant to mode and set up as active low */
+ ret = sca3000_read_data_short(st, SCA3000_REG_INT_MASK_ADDR, 1);
+ if (ret)
+ goto error_ret;
+ ret = sca3000_write_reg(st,
+ SCA3000_REG_INT_MASK_ADDR,
+ (ret & SCA3000_REG_INT_MASK_PROT_MASK)
+ | SCA3000_REG_INT_MASK_ACTIVE_LOW);
+ if (ret)
+ goto error_ret;
+ /*
+ * Select normal measurement mode, free fall off, ring off
+ * Ring in 12 bit mode - it is fine to overwrite reserved bits 3,5
+ * as that occurs in one of the example on the datasheet
+ */
+ ret = sca3000_read_data_short(st, SCA3000_REG_MODE_ADDR, 1);
+ if (ret)
+ goto error_ret;
+ ret = sca3000_write_reg(st, SCA3000_REG_MODE_ADDR,
+ (st->rx[0] & SCA3000_MODE_PROT_MASK));
+
+error_ret:
+ mutex_unlock(&st->lock);
+ return ret;
+}
+
+static const struct iio_info sca3000_info = {
+ .attrs = &sca3000_attribute_group,
+ .read_raw = &sca3000_read_raw,
+ .write_raw = &sca3000_write_raw,
+ .read_event_value = &sca3000_read_event_value,
+ .write_event_value = &sca3000_write_event_value,
+ .read_event_config = &sca3000_read_event_config,
+ .write_event_config = &sca3000_write_event_config,
+ .driver_module = THIS_MODULE,
+};
+
+static int sca3000_probe(struct spi_device *spi)
+{
+ int ret;
+ struct sca3000_state *st;
+ struct iio_dev *indio_dev;
+
+ indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+ spi_set_drvdata(spi, indio_dev);
+ st->us = spi;
+ mutex_init(&st->lock);
+ st->info = &sca3000_spi_chip_info_tbl[spi_get_device_id(spi)
+ ->driver_data];
+
+ indio_dev->dev.parent = &spi->dev;
+ indio_dev->name = spi_get_device_id(spi)->name;
+ indio_dev->info = &sca3000_info;
+ if (st->info->temp_output) {
+ indio_dev->channels = sca3000_channels_with_temp;
+ indio_dev->num_channels =
+ ARRAY_SIZE(sca3000_channels_with_temp);
+ } else {
+ indio_dev->channels = sca3000_channels;
+ indio_dev->num_channels = ARRAY_SIZE(sca3000_channels);
+ }
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ sca3000_configure_ring(indio_dev);
+
+ if (spi->irq) {
+ ret = request_threaded_irq(spi->irq,
+ NULL,
+ &sca3000_event_handler,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "sca3000",
+ indio_dev);
+ if (ret)
+ return ret;
+ }
+ indio_dev->setup_ops = &sca3000_ring_setup_ops;
+ ret = sca3000_clean_setup(st);
+ if (ret)
+ goto error_free_irq;
+
+ ret = sca3000_print_rev(indio_dev);
+ if (ret)
+ goto error_free_irq;
+
+ return iio_device_register(indio_dev);
+
+error_free_irq:
+ if (spi->irq)
+ free_irq(spi->irq, indio_dev);
+
+ return ret;
+}
+
+static int sca3000_stop_all_interrupts(struct sca3000_state *st)
+{
+ int ret;
+
+ mutex_lock(&st->lock);
+ ret = sca3000_read_data_short(st, SCA3000_REG_INT_MASK_ADDR, 1);
+ if (ret)
+ goto error_ret;
+ ret = sca3000_write_reg(st, SCA3000_REG_INT_MASK_ADDR,
+ (st->rx[0] &
+ ~(SCA3000_REG_INT_MASK_RING_THREE_QUARTER |
+ SCA3000_REG_INT_MASK_RING_HALF |
+ SCA3000_REG_INT_MASK_ALL_INTS)));
+error_ret:
+ mutex_unlock(&st->lock);
+ return ret;
+}
+
+static int sca3000_remove(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev = spi_get_drvdata(spi);
+ struct sca3000_state *st = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+
+ /* Must ensure no interrupts can be generated after this! */
+ sca3000_stop_all_interrupts(st);
+ if (spi->irq)
+ free_irq(spi->irq, indio_dev);
+
+ sca3000_unconfigure_ring(indio_dev);
+
+ return 0;
+}
+
+static const struct spi_device_id sca3000_id[] = {
+ {"sca3000_d01", d01},
+ {"sca3000_e02", e02},
+ {"sca3000_e04", e04},
+ {"sca3000_e05", e05},
+ {}
+};
+MODULE_DEVICE_TABLE(spi, sca3000_id);
+
+static struct spi_driver sca3000_driver = {
+ .driver = {
+ .name = "sca3000",
+ },
+ .probe = sca3000_probe,
+ .remove = sca3000_remove,
+ .id_table = sca3000_id,
+};
+module_spi_driver(sca3000_driver);
+
+MODULE_AUTHOR("Jonathan Cameron <jic23@kernel.org>");
+MODULE_DESCRIPTION("VTI SCA3000 Series Accelerometers SPI driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
index f8dfdb690563..7c231687109a 100644
--- a/drivers/iio/accel/st_accel.h
+++ b/drivers/iio/accel/st_accel.h
@@ -30,6 +30,7 @@
#define LSM303AGR_ACCEL_DEV_NAME "lsm303agr_accel"
#define LIS2DH12_ACCEL_DEV_NAME "lis2dh12_accel"
#define LIS3L02DQ_ACCEL_DEV_NAME "lis3l02dq"
+#define LNG2DM_ACCEL_DEV_NAME "lng2dm"
/**
* struct st_sensors_platform_data - default accel platform data
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index ce69048c88e9..bdb619a28a4e 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -231,6 +231,12 @@
#define ST_ACCEL_7_DRDY_IRQ_INT1_MASK 0x04
#define ST_ACCEL_7_MULTIREAD_BIT false
+/* CUSTOM VALUES FOR SENSOR 8 */
+#define ST_ACCEL_8_FS_AVL_2_GAIN IIO_G_TO_M_S_2(15600)
+#define ST_ACCEL_8_FS_AVL_4_GAIN IIO_G_TO_M_S_2(31200)
+#define ST_ACCEL_8_FS_AVL_8_GAIN IIO_G_TO_M_S_2(62500)
+#define ST_ACCEL_8_FS_AVL_16_GAIN IIO_G_TO_M_S_2(187500)
+
static const struct iio_chan_spec st_accel_8bit_channels[] = {
ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
@@ -726,6 +732,73 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.multi_read_bit = ST_ACCEL_7_MULTIREAD_BIT,
.bootime = 2,
},
+ {
+ .wai = ST_ACCEL_1_WAI_EXP,
+ .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+ .sensors_supported = {
+ [0] = LNG2DM_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_8bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_1_ODR_ADDR,
+ .mask = ST_ACCEL_1_ODR_MASK,
+ .odr_avl = {
+ { 1, ST_ACCEL_1_ODR_AVL_1HZ_VAL, },
+ { 10, ST_ACCEL_1_ODR_AVL_10HZ_VAL, },
+ { 25, ST_ACCEL_1_ODR_AVL_25HZ_VAL, },
+ { 50, ST_ACCEL_1_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_1_ODR_AVL_100HZ_VAL, },
+ { 200, ST_ACCEL_1_ODR_AVL_200HZ_VAL, },
+ { 400, ST_ACCEL_1_ODR_AVL_400HZ_VAL, },
+ { 1600, ST_ACCEL_1_ODR_AVL_1600HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_1_ODR_ADDR,
+ .mask = ST_ACCEL_1_ODR_MASK,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_1_FS_ADDR,
+ .mask = ST_ACCEL_1_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_1_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_8_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_1_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_8_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_1_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_8_FS_AVL_8_GAIN,
+ },
+ [3] = {
+ .num = ST_ACCEL_FS_AVL_16G,
+ .value = ST_ACCEL_1_FS_AVL_16_VAL,
+ .gain = ST_ACCEL_8_FS_AVL_16_GAIN,
+ },
+ },
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_1_DRDY_IRQ_ADDR,
+ .mask_int1 = ST_ACCEL_1_DRDY_IRQ_INT1_MASK,
+ .mask_int2 = ST_ACCEL_1_DRDY_IRQ_INT2_MASK,
+ .addr_ihl = ST_ACCEL_1_IHL_IRQ_ADDR,
+ .mask_ihl = ST_ACCEL_1_IHL_IRQ_MASK,
+ .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
+ },
+ .multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT,
+ .bootime = 2,
+ },
};
static int st_accel_read_raw(struct iio_dev *indio_dev,
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
index e9d427a5df7c..c0f8867aa1ea 100644
--- a/drivers/iio/accel/st_accel_i2c.c
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -84,6 +84,10 @@ static const struct of_device_id st_accel_of_match[] = {
.compatible = "st,lis3l02dq",
.data = LIS3L02DQ_ACCEL_DEV_NAME,
},
+ {
+ .compatible = "st,lng2dm-accel",
+ .data = LNG2DM_ACCEL_DEV_NAME,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_accel_of_match);
@@ -135,6 +139,7 @@ static const struct i2c_device_id st_accel_id_table[] = {
{ LSM303AGR_ACCEL_DEV_NAME },
{ LIS2DH12_ACCEL_DEV_NAME },
{ LIS3L02DQ_ACCEL_DEV_NAME },
+ { LNG2DM_ACCEL_DEV_NAME },
{},
};
MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
index efd43941d45d..c25ac50d4600 100644
--- a/drivers/iio/accel/st_accel_spi.c
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -60,6 +60,7 @@ static const struct spi_device_id st_accel_id_table[] = {
{ LSM303AGR_ACCEL_DEV_NAME },
{ LIS2DH12_ACCEL_DEV_NAME },
{ LIS3L02DQ_ACCEL_DEV_NAME },
+ { LNG2DM_ACCEL_DEV_NAME },
{},
};
MODULE_DEVICE_TABLE(spi, st_accel_id_table);
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 09:52:41 +0300