summaryrefslogtreecommitdiff
path: root/drivers/ide
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide')
-rw-r--r--drivers/ide/Kconfig45
-rw-r--r--drivers/ide/alim15x3.c12
-rw-r--r--drivers/ide/au1xxx-ide.c7
-rw-r--r--drivers/ide/cmd64x.c17
-rw-r--r--drivers/ide/cs5535.c1
-rw-r--r--drivers/ide/cy82c693.c27
-rw-r--r--drivers/ide/hpt366.c65
-rw-r--r--drivers/ide/ide-tape.c21
-rw-r--r--drivers/ide/ide_platform.c8
-rw-r--r--drivers/ide/pdc202xx_old.c15
-rw-r--r--drivers/ide/sis5513.c9
-rw-r--r--drivers/ide/sl82c105.c24
-rw-r--r--drivers/ide/slc90e66.c3
-rw-r--r--drivers/ide/tx4938ide.c2
14 files changed, 37 insertions, 219 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 9a5d0aaac9d0..98ccfeb3f5aa 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -7,50 +7,25 @@ config HAVE_IDE
bool
menuconfig IDE
- tristate "ATA/ATAPI/MFM/RLL support"
+ tristate "ATA/ATAPI/MFM/RLL support (DEPRECATED)"
depends on HAVE_IDE
depends on BLOCK
---help---
- If you say Y here, your kernel will be able to manage low cost mass
- storage units such as ATA/(E)IDE and ATAPI units. The most common
- cases are IDE hard drives and ATAPI CD-ROM drives.
-
- If your system is pure SCSI and doesn't use these interfaces, you
- can say N here.
-
- Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
- for mass storage units such as hard disks. It was designed by
- Western Digital and Compaq Computer in 1984. It was then named
- ST506. Quite a number of disks use the IDE interface.
-
- AT Attachment (ATA) is the superset of the IDE specifications.
- ST506 was also called ATA-1.
-
- Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
- ATA-3. It provides support for larger disks (up to 8.4GB by means of
- the LBA standard), more disks (4 instead of 2) and for other mass
- storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
- ATA-4 and provides faster (and more CPU friendly) transfer modes
- than previous PIO (Programmed processor Input/Output) from previous
- ATA/IDE standards by means of fast DMA controllers.
-
- ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
- CD-ROM drives, similar in many respects to the SCSI protocol.
-
- SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
- designed in order to prevent data corruption and disk crash by
- detecting pre hardware failure conditions (heat, access time, and
- the like...). Disks built since June 1995 may follow this standard.
- The kernel itself doesn't manage this; however there are quite a
- number of user programs such as smart that can query the status of
- SMART parameters from disk drives.
+ If you say Y here, your kernel will be able to manage ATA/(E)IDE and
+ ATAPI units. The most common cases are IDE hard drives and ATAPI
+ CD-ROM drives.
+
+ This subsystem is currently in maintenance mode with only bug fix
+ changes applied. Users of ATA hardware are encouraged to migrate to
+ the newer ATA subsystem ("Serial ATA (prod) and Parallel ATA
+ (experimental) drivers") which is more actively maintained.
To compile this driver as a module, choose M here: the
module will be called ide-core.
For further information, please read <file:Documentation/ide/ide.txt>.
- If unsure, say Y.
+ If unsure, say N.
if IDE
diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c
index e59b6dee9ae2..0abc43f3101e 100644
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -40,16 +40,6 @@
#define DRV_NAME "alim15x3"
/*
- * Allow UDMA on M1543C-E chipset for WDC disks that ignore CRC checking
- * (this is DANGEROUS and could result in data corruption).
- */
-static int wdc_udma;
-
-module_param(wdc_udma, bool, 0);
-MODULE_PARM_DESC(wdc_udma,
- "allow UDMA on M1543C-E chipset for WDC disks (DANGEROUS)");
-
-/*
* ALi devices are not plug in. Otherwise these static values would
* need to go. They ought to go away anyway
*/
@@ -132,7 +122,7 @@ static u8 ali_udma_filter(ide_drive_t *drive)
if (m5229_revision > 0x20 && m5229_revision < 0xC2) {
if (drive->media != ide_disk)
return 0;
- if (wdc_udma == 0 && chip_is_1543c_e &&
+ if (chip_is_1543c_e &&
strstr((char *)&drive->id[ATA_ID_PROD], "WDC "))
return 0;
}
diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c
index 58121bd6c115..87cef0c440ad 100644
--- a/drivers/ide/au1xxx-ide.c
+++ b/drivers/ide/au1xxx-ide.c
@@ -532,14 +532,13 @@ static int au_ide_probe(struct platform_device *dev)
goto out;
}
- if (!request_mem_region(res->start, res->end - res->start + 1,
- dev->name)) {
+ if (!request_mem_region(res->start, resource_size(res), dev->name)) {
pr_debug("%s: request_mem_region failed\n", DRV_NAME);
ret = -EBUSY;
goto out;
}
- ahwif->regbase = (u32)ioremap(res->start, res->end - res->start + 1);
+ ahwif->regbase = (u32)ioremap(res->start, resource_size(res));
if (ahwif->regbase == 0) {
ret = -ENOMEM;
goto out;
@@ -575,7 +574,7 @@ static int au_ide_remove(struct platform_device *dev)
iounmap((void *)ahwif->regbase);
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, res->end - res->start + 1);
+ release_mem_region(res->start, resource_size(res));
return 0;
}
diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c
index ca0c46f6580a..f2500c8826bb 100644
--- a/drivers/ide/cmd64x.c
+++ b/drivers/ide/cmd64x.c
@@ -20,14 +20,6 @@
#define DRV_NAME "cmd64x"
-#define CMD_DEBUG 0
-
-#if CMD_DEBUG
-#define cmdprintk(x...) printk(x)
-#else
-#define cmdprintk(x...)
-#endif
-
/*
* CMD64x specific registers definition.
*/
@@ -76,9 +68,6 @@ static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_
{15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0};
static const u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM2, DRWTIM3};
- cmdprintk("program_cycle_times parameters: total=%d, active=%d\n",
- cycle_time, active_time);
-
cycle_count = quantize_timing( cycle_time, clock_time);
active_count = quantize_timing(active_time, clock_time);
recovery_count = cycle_count - active_count;
@@ -94,9 +83,6 @@ static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_
if (active_count > 16) /* shouldn't actually happen... */
active_count = 16;
- cmdprintk("Final counts: total=%d, active=%d, recovery=%d\n",
- cycle_count, active_count, recovery_count);
-
/*
* Convert values to internal chipset representation
*/
@@ -106,7 +92,6 @@ static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_
/* Program the active/recovery counts into the DRWTIM register */
drwtim = (active_count << 4) | recovery_count;
(void) pci_write_config_byte(dev, drwtim_regs[drive->dn], drwtim);
- cmdprintk("Write 0x%02x to reg 0x%x\n", drwtim, drwtim_regs[drive->dn]);
}
/*
@@ -150,7 +135,6 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
if (setup_count > 5) /* shouldn't actually happen... */
setup_count = 5;
- cmdprintk("Final address setup count: %d\n", setup_count);
/*
* Program the address setup clocks into the ARTTIM registers.
@@ -162,7 +146,6 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
arttim &= ~0xc0;
arttim |= setup_values[setup_count];
(void) pci_write_config_byte(dev, arttim_regs[drive->dn], arttim);
- cmdprintk("Write 0x%02x to reg 0x%x\n", arttim, arttim_regs[drive->dn]);
}
/*
diff --git a/drivers/ide/cs5535.c b/drivers/ide/cs5535.c
index 983d957a0189..b883838adc24 100644
--- a/drivers/ide/cs5535.c
+++ b/drivers/ide/cs5535.c
@@ -187,6 +187,7 @@ static int __devinit cs5535_init_one(struct pci_dev *dev,
static const struct pci_device_id cs5535_pci_tbl[] = {
{ PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_CS5535_IDE), 0 },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5535_IDE), },
{ 0, },
};
diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c
index 74fc5401f407..d6e2cbbc53a0 100644
--- a/drivers/ide/cy82c693.c
+++ b/drivers/ide/cy82c693.c
@@ -51,11 +51,6 @@
#define DRV_NAME "cy82c693"
/*
- * The following are used to debug the driver.
- */
-#define CY82C693_DEBUG_INFO 0
-
-/*
* NOTE: the value for busmaster timeout is tricky and I got it by
* trial and error! By using a to low value will cause DMA timeouts
* and drop IDE performance, and by using a to high value will cause
@@ -176,11 +171,6 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode)
outb(index, CY82_INDEX_PORT);
outb(data, CY82_DATA_PORT);
-#if CY82C693_DEBUG_INFO
- printk(KERN_INFO "%s (ch=%d, dev=%d): set DMA mode to %d (single=%d)\n",
- drive->name, hwif->channel, drive->dn & 1, mode & 3, single);
-#endif /* CY82C693_DEBUG_INFO */
-
/*
* note: below we set the value for Bus Master IDE TimeOut Register
* I'm not absolutly sure what this does, but it solved my problem
@@ -194,11 +184,6 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode)
data = BUSMASTER_TIMEOUT;
outb(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT);
outb(data, CY82_DATA_PORT);
-
-#if CY82C693_DEBUG_INFO
- printk(KERN_INFO "%s: Set IDE Bus Master TimeOut Register to 0x%X\n",
- drive->name, data);
-#endif /* CY82C693_DEBUG_INFO */
}
static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
@@ -239,8 +224,6 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, pclk.time_16r);
pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, pclk.time_16w);
pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, pclk.time_8);
-
- addrCtrl &= 0xF;
} else {
/*
* set slave drive
@@ -257,17 +240,7 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, pclk.time_16r);
pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, pclk.time_16w);
pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, pclk.time_8);
-
- addrCtrl >>= 4;
- addrCtrl &= 0xF;
}
-
-#if CY82C693_DEBUG_INFO
- printk(KERN_INFO "%s (ch=%d, dev=%d): set PIO timing to "
- "(addr=0x%X, ior=0x%X, iow=0x%X, 8bit=0x%X)\n",
- drive->name, hwif->channel, drive->dn & 1,
- addrCtrl, pclk.time_16r, pclk.time_16w, pclk.time_8);
-#endif /* CY82C693_DEBUG_INFO */
}
static void __devinit init_iops_cy82c693(ide_hwif_t *hwif)
diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
index 7ce68ef6b904..4d90ac2dbb1b 100644
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@@ -297,68 +297,6 @@ static u32 twenty_five_base_hpt36x[] = {
/* XFER_PIO_0 */ 0xc0d08585
};
-#if 0
-/* These are the timing tables from the HighPoint open source drivers... */
-static u32 thirty_three_base_hpt37x[] = {
- /* XFER_UDMA_6 */ 0x12446231, /* 0x12646231 ?? */
- /* XFER_UDMA_5 */ 0x12446231,
- /* XFER_UDMA_4 */ 0x12446231,
- /* XFER_UDMA_3 */ 0x126c6231,
- /* XFER_UDMA_2 */ 0x12486231,
- /* XFER_UDMA_1 */ 0x124c6233,
- /* XFER_UDMA_0 */ 0x12506297,
-
- /* XFER_MW_DMA_2 */ 0x22406c31,
- /* XFER_MW_DMA_1 */ 0x22406c33,
- /* XFER_MW_DMA_0 */ 0x22406c97,
-
- /* XFER_PIO_4 */ 0x06414e31,
- /* XFER_PIO_3 */ 0x06414e42,
- /* XFER_PIO_2 */ 0x06414e53,
- /* XFER_PIO_1 */ 0x06814e93,
- /* XFER_PIO_0 */ 0x06814ea7
-};
-
-static u32 fifty_base_hpt37x[] = {
- /* XFER_UDMA_6 */ 0x12848242,
- /* XFER_UDMA_5 */ 0x12848242,
- /* XFER_UDMA_4 */ 0x12ac8242,
- /* XFER_UDMA_3 */ 0x128c8242,
- /* XFER_UDMA_2 */ 0x120c8242,
- /* XFER_UDMA_1 */ 0x12148254,
- /* XFER_UDMA_0 */ 0x121882ea,
-
- /* XFER_MW_DMA_2 */ 0x22808242,
- /* XFER_MW_DMA_1 */ 0x22808254,
- /* XFER_MW_DMA_0 */ 0x228082ea,
-
- /* XFER_PIO_4 */ 0x0a81f442,
- /* XFER_PIO_3 */ 0x0a81f443,
- /* XFER_PIO_2 */ 0x0a81f454,
- /* XFER_PIO_1 */ 0x0ac1f465,
- /* XFER_PIO_0 */ 0x0ac1f48a
-};
-
-static u32 sixty_six_base_hpt37x[] = {
- /* XFER_UDMA_6 */ 0x1c869c62,
- /* XFER_UDMA_5 */ 0x1cae9c62, /* 0x1c8a9c62 */
- /* XFER_UDMA_4 */ 0x1c8a9c62,
- /* XFER_UDMA_3 */ 0x1c8e9c62,
- /* XFER_UDMA_2 */ 0x1c929c62,
- /* XFER_UDMA_1 */ 0x1c9a9c62,
- /* XFER_UDMA_0 */ 0x1c829c62,
-
- /* XFER_MW_DMA_2 */ 0x2c829c62,
- /* XFER_MW_DMA_1 */ 0x2c829c66,
- /* XFER_MW_DMA_0 */ 0x2c829d2e,
-
- /* XFER_PIO_4 */ 0x0c829c62,
- /* XFER_PIO_3 */ 0x0c829c84,
- /* XFER_PIO_2 */ 0x0c829ca6,
- /* XFER_PIO_1 */ 0x0d029d26,
- /* XFER_PIO_0 */ 0x0d029d5e
-};
-#else
/*
* The following are the new timing tables with PIO mode data/taskfile transfer
* overclocking fixed...
@@ -424,16 +362,13 @@ static u32 sixty_six_base_hpt37x[] = {
/* XFER_PIO_1 */ 0x0d02ff26,
/* XFER_PIO_0 */ 0x0d42ff7f
};
-#endif
-#define HPT366_DEBUG_DRIVE_INFO 0
#define HPT371_ALLOW_ATA133_6 1
#define HPT302_ALLOW_ATA133_6 1
#define HPT372_ALLOW_ATA133_6 1
#define HPT370_ALLOW_ATA100_5 0
#define HPT366_ALLOW_ATA66_4 1
#define HPT366_ALLOW_ATA66_3 1
-#define HPT366_MAX_DEVS 8
/* Supported ATA clock frequencies */
enum ata_clock {
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 58fc920d5c32..6a0e62542167 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -221,6 +221,8 @@ typedef struct ide_tape_obj {
static DEFINE_MUTEX(idetape_ref_mutex);
+static DEFINE_MUTEX(idetape_chrdev_mutex);
+
static struct class *idetape_sysfs_class;
static void ide_tape_release(struct device *);
@@ -1457,10 +1459,11 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
if (i >= MAX_HWIFS * MAX_DRIVES)
return -ENXIO;
- lock_kernel();
+ mutex_lock(&idetape_chrdev_mutex);
+
tape = ide_tape_get(NULL, true, i);
if (!tape) {
- unlock_kernel();
+ mutex_unlock(&idetape_chrdev_mutex);
return -ENXIO;
}
@@ -1519,12 +1522,15 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp)
tape->door_locked = DOOR_LOCKED;
}
}
- unlock_kernel();
+ mutex_unlock(&idetape_chrdev_mutex);
+
return 0;
out_put_tape:
ide_tape_put(tape);
- unlock_kernel();
+
+ mutex_unlock(&idetape_chrdev_mutex);
+
return retval;
}
@@ -1551,7 +1557,8 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp)
ide_drive_t *drive = tape->drive;
unsigned int minor = iminor(inode);
- lock_kernel();
+ mutex_lock(&idetape_chrdev_mutex);
+
tape = drive->driver_data;
ide_debug_log(IDE_DBG_FUNC, "enter");
@@ -1575,7 +1582,9 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp)
}
clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags);
ide_tape_put(tape);
- unlock_kernel();
+
+ mutex_unlock(&idetape_chrdev_mutex);
+
return 0;
}
diff --git a/drivers/ide/ide_platform.c b/drivers/ide/ide_platform.c
index b579fbe88370..42965b3e30b9 100644
--- a/drivers/ide/ide_platform.c
+++ b/drivers/ide/ide_platform.c
@@ -81,14 +81,14 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)
if (mmio) {
base = devm_ioremap(&pdev->dev,
- res_base->start, res_base->end - res_base->start + 1);
+ res_base->start, resource_size(res_base));
alt_base = devm_ioremap(&pdev->dev,
- res_alt->start, res_alt->end - res_alt->start + 1);
+ res_alt->start, resource_size(res_alt));
} else {
base = devm_ioport_map(&pdev->dev,
- res_base->start, res_base->end - res_base->start + 1);
+ res_base->start, resource_size(res_base));
alt_base = devm_ioport_map(&pdev->dev,
- res_alt->start, res_alt->end - res_alt->start + 1);
+ res_alt->start, resource_size(res_alt));
}
memset(&hw, 0, sizeof(hw));
diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c
index cb812f3700e8..35161dd840a0 100644
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -21,8 +21,6 @@
#define DRV_NAME "pdc202xx_old"
-#define PDC202XX_DEBUG_DRIVE_INFO 0
-
static void pdc_old_disable_66MHz_clock(ide_hwif_t *);
static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
@@ -34,11 +32,6 @@ static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
u8 AP = 0, BP = 0, CP = 0;
u8 TA = 0, TB = 0, TC = 0;
-#if PDC202XX_DEBUG_DRIVE_INFO
- u32 drive_conf = 0;
- pci_read_config_dword(dev, drive_pci, &drive_conf);
-#endif
-
/*
* TODO: do this once per channel
*/
@@ -89,14 +82,6 @@ static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
pci_write_config_byte(dev, drive_pci + 1, BP | TB);
pci_write_config_byte(dev, drive_pci + 2, CP | TC);
}
-
-#if PDC202XX_DEBUG_DRIVE_INFO
- printk(KERN_DEBUG "%s: %s drive%d 0x%08x ",
- drive->name, ide_xfer_verbose(speed),
- drive->dn, drive_conf);
- pci_read_config_dword(dev, drive_pci, &drive_conf);
- printk("0x%08x\n", drive_conf);
-#endif
}
static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
diff --git a/drivers/ide/sis5513.c b/drivers/ide/sis5513.c
index 3b88eba04c9c..468706082fb5 100644
--- a/drivers/ide/sis5513.c
+++ b/drivers/ide/sis5513.c
@@ -632,12 +632,3 @@ module_exit(sis5513_ide_exit);
MODULE_AUTHOR("Lionel Bouton, L C Chang, Andre Hedrick, Vojtech Pavlik");
MODULE_DESCRIPTION("PCI driver module for SIS IDE");
MODULE_LICENSE("GPL");
-
-/*
- * TODO:
- * - CLEANUP
- * - More checks in the config registers (force values instead of
- * relying on the BIOS setting them correctly).
- * - Further optimisations ?
- * . for example ATA66+ regs 0x48 & 0x4A
- */
diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c
index d698da470d6f..3c2bbf0057ea 100644
--- a/drivers/ide/sl82c105.c
+++ b/drivers/ide/sl82c105.c
@@ -24,13 +24,6 @@
#define DRV_NAME "sl82c105"
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(arg) printk arg
-#else
-#define DBG(fmt,...)
-#endif
/*
* SL82C105 PCI config register 0x40 bits.
*/
@@ -104,9 +97,6 @@ static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed)
unsigned long timings = (unsigned long)ide_get_drivedata(drive);
u16 drv_ctrl;
- DBG(("sl82c105_tune_chipset(drive:%s, speed:%s)\n",
- drive->name, ide_xfer_verbose(speed)));
-
drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0];
/*
@@ -196,8 +186,6 @@ static void sl82c105_dma_start(ide_drive_t *drive)
struct pci_dev *dev = to_pci_dev(hwif->dev);
int reg = 0x44 + drive->dn * 4;
- DBG(("%s(drive:%s)\n", __func__, drive->name));
-
pci_write_config_word(dev, reg,
(unsigned long)ide_get_drivedata(drive) >> 16);
@@ -209,8 +197,6 @@ static void sl82c105_dma_clear(ide_drive_t *drive)
{
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- DBG(("sl82c105_dma_clear(drive:%s)\n", drive->name));
-
sl82c105_reset_host(dev);
}
@@ -218,11 +204,7 @@ static int sl82c105_dma_end(ide_drive_t *drive)
{
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
int reg = 0x44 + drive->dn * 4;
- int ret;
-
- DBG(("%s(drive:%s)\n", __func__, drive->name));
-
- ret = ide_dma_end(drive);
+ int ret = ide_dma_end(drive);
pci_write_config_word(dev, reg,
(unsigned long)ide_get_drivedata(drive));
@@ -239,8 +221,6 @@ static void sl82c105_resetproc(ide_drive_t *drive)
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u32 val;
- DBG(("sl82c105_resetproc(drive:%s)\n", drive->name));
-
pci_read_config_dword(dev, 0x40, &val);
val |= (CTRL_P1F16 | CTRL_P0F16);
pci_write_config_dword(dev, 0x40, val);
@@ -291,8 +271,6 @@ static int init_chipset_sl82c105(struct pci_dev *dev)
{
u32 val;
- DBG(("init_chipset_sl82c105()\n"));
-
pci_read_config_dword(dev, 0x40, &val);
val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
pci_write_config_dword(dev, 0x40, val);
diff --git a/drivers/ide/slc90e66.c b/drivers/ide/slc90e66.c
index 9aec78d3bcff..1ccfb40e7215 100644
--- a/drivers/ide/slc90e66.c
+++ b/drivers/ide/slc90e66.c
@@ -91,8 +91,7 @@ static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
if (!(reg48 & u_flag))
pci_write_config_word(dev, 0x48, reg48|u_flag);
- /* FIXME: (reg4a & a_speed) ? */
- if ((reg4a & u_speed) != u_speed) {
+ if ((reg4a & a_speed) != u_speed) {
pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
pci_read_config_word(dev, 0x4a, &reg4a);
pci_write_config_word(dev, 0x4a, reg4a|u_speed);
diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c
index ea89fddeed91..fd59c0d235b5 100644
--- a/drivers/ide/tx4938ide.c
+++ b/drivers/ide/tx4938ide.c
@@ -146,7 +146,7 @@ static int __init tx4938ide_probe(struct platform_device *pdev)
return -ENODEV;
if (!devm_request_mem_region(&pdev->dev, res->start,
- res->end - res->start + 1, "tx4938ide"))
+ resource_size(res), "tx4938ide"))
return -EBUSY;
mapbase = (unsigned long)devm_ioremap(&pdev->dev, res->start,
8 << pdata->ioport_shift);
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-30 04:20:39 +0300