diff options
Diffstat (limited to 'drivers/ide/legacy/ht6560b.c')
| -rw-r--r-- | drivers/ide/legacy/ht6560b.c | 50 |
1 files changed, 36 insertions, 14 deletions
diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c index 02d12c74764a..88fe9070c9c3 100644 --- a/drivers/ide/legacy/ht6560b.c +++ b/drivers/ide/legacy/ht6560b.c @@ -21,18 +21,21 @@ * "Prefetch" mode bit OFF for ide disks and * ON for anything else. * + * Version 0.08 Need to force prefetch for CDs and other non-disk + * devices. (not sure which devices exactly need + * prefetch) * * HT-6560B EIDE-controller support * To activate controller support use kernel parameter "ide0=ht6560b". * Use hdparm utility to enable PIO mode support. * * Author: Mikko Ala-Fossi <maf@iki.fi> - * Jan Evert van Grootheest <janevert@iae.nl> + * Jan Evert van Grootheest <janevert@caiway.nl> * * Try: http://www.maf.iki.fi/~maf/ht6560b/ */ -#define HT6560B_VERSION "v0.07" +#define HT6560B_VERSION "v0.08" #include <linux/module.h> #include <linux/types.h> @@ -79,7 +82,7 @@ * out how they setup those cycle time interfacing values, as they at Holtek * call them. IDESETUP.COM that is supplied with the drivers figures out * optimal values and fetches those values to drivers. I found out that - * they use IDE_SELECT_REG to fetch timings to the ide board right after + * they use Select register to fetch timings to the ide board right after * interface switching. After that it was quite easy to add code to * ht6560b.c. * @@ -124,21 +127,27 @@ */ static void ht6560b_selectproc (ide_drive_t *drive) { + ide_hwif_t *hwif = drive->hwif; unsigned long flags; static u8 current_select = 0; static u8 current_timing = 0; u8 select, timing; local_irq_save(flags); - + select = HT_CONFIG(drive); timing = HT_TIMING(drive); - + + /* + * Need to enforce prefetch sometimes because otherwise + * it'll hang (hard). + */ + if (drive->media != ide_disk || !drive->present) + select |= HT_PREFETCH_MODE; + if (select != current_select || timing != current_timing) { current_select = select; current_timing = timing; - if (drive->media != ide_disk || !drive->present) - select |= HT_PREFETCH_MODE; (void)inb(HT_CONFIG_PORT); (void)inb(HT_CONFIG_PORT); (void)inb(HT_CONFIG_PORT); @@ -147,8 +156,8 @@ static void ht6560b_selectproc (ide_drive_t *drive) /* * Set timing for this drive: */ - outb(timing, IDE_SELECT_REG); - (void)inb(IDE_STATUS_REG); + outb(timing, hwif->io_ports[IDE_SELECT_OFFSET]); + (void)inb(hwif->io_ports[IDE_STATUS_OFFSET]); #ifdef DEBUG printk("ht6560b: %s: select=%#x timing=%#x\n", drive->name, select, timing); @@ -185,14 +194,15 @@ static int __init try_to_init_ht6560b(void) * Ht6560b autodetected */ outb(HT_CONFIG_DEFAULT, HT_CONFIG_PORT); - outb(HT_TIMING_DEFAULT, 0x1f6); /* IDE_SELECT_REG */ - (void) inb(0x1f7); /* IDE_STATUS_REG */ - - printk("\nht6560b " HT6560B_VERSION + outb(HT_TIMING_DEFAULT, 0x1f6); /* Select register */ + (void)inb(0x1f7); /* Status register */ + + printk("ht6560b " HT6560B_VERSION ": chipset detected and initialized" #ifdef DEBUG " with debug enabled" #endif + "\n" ); return 1; } @@ -323,13 +333,14 @@ static const struct ide_port_info ht6560b_port_info __initdata = { IDE_HFLAG_NO_DMA | IDE_HFLAG_NO_AUTOTUNE | IDE_HFLAG_ABUSE_PREFETCH, - .pio_mask = ATA_PIO5, + .pio_mask = ATA_PIO4, }; static int __init ht6560b_init(void) { ide_hwif_t *hwif, *mate; static u8 idx[4] = { 0, 1, 0xff, 0xff }; + hw_regs_t hw[2]; if (probe_ht6560b == 0) return -ENODEV; @@ -348,6 +359,17 @@ static int __init ht6560b_init(void) goto release_region; } + memset(&hw, 0, sizeof(hw)); + + ide_std_init_ports(&hw[0], 0x1f0, 0x3f6); + hw[0].irq = 14; + + ide_std_init_ports(&hw[1], 0x170, 0x376); + hw[1].irq = 15; + + ide_init_port_hw(hwif, &hw[0]); + ide_init_port_hw(mate, &hw[1]); + hwif->selectproc = &ht6560b_selectproc; hwif->set_pio_mode = &ht6560b_set_pio_mode; |