diff options
Diffstat (limited to 'drivers/ide/aec62xx.c')
| -rw-r--r-- | drivers/ide/aec62xx.c | 331 |
1 files changed, 0 insertions, 331 deletions
diff --git a/drivers/ide/aec62xx.c b/drivers/ide/aec62xx.c deleted file mode 100644 index 4c959ce41ba9..000000000000 --- a/drivers/ide/aec62xx.c +++ /dev/null @@ -1,331 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com> - * - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/ide.h> -#include <linux/init.h> - -#include <asm/io.h> - -#define DRV_NAME "aec62xx" - -struct chipset_bus_clock_list_entry { - u8 xfer_speed; - u8 chipset_settings; - u8 ultra_settings; -}; - -static const struct chipset_bus_clock_list_entry aec6xxx_33_base [] = { - { XFER_UDMA_6, 0x31, 0x07 }, - { XFER_UDMA_5, 0x31, 0x06 }, - { XFER_UDMA_4, 0x31, 0x05 }, - { XFER_UDMA_3, 0x31, 0x04 }, - { XFER_UDMA_2, 0x31, 0x03 }, - { XFER_UDMA_1, 0x31, 0x02 }, - { XFER_UDMA_0, 0x31, 0x01 }, - - { XFER_MW_DMA_2, 0x31, 0x00 }, - { XFER_MW_DMA_1, 0x31, 0x00 }, - { XFER_MW_DMA_0, 0x0a, 0x00 }, - { XFER_PIO_4, 0x31, 0x00 }, - { XFER_PIO_3, 0x33, 0x00 }, - { XFER_PIO_2, 0x08, 0x00 }, - { XFER_PIO_1, 0x0a, 0x00 }, - { XFER_PIO_0, 0x00, 0x00 }, - { 0, 0x00, 0x00 } -}; - -static const struct chipset_bus_clock_list_entry aec6xxx_34_base [] = { - { XFER_UDMA_6, 0x41, 0x06 }, - { XFER_UDMA_5, 0x41, 0x05 }, - { XFER_UDMA_4, 0x41, 0x04 }, - { XFER_UDMA_3, 0x41, 0x03 }, - { XFER_UDMA_2, 0x41, 0x02 }, - { XFER_UDMA_1, 0x41, 0x01 }, - { XFER_UDMA_0, 0x41, 0x01 }, - - { XFER_MW_DMA_2, 0x41, 0x00 }, - { XFER_MW_DMA_1, 0x42, 0x00 }, - { XFER_MW_DMA_0, 0x7a, 0x00 }, - { XFER_PIO_4, 0x41, 0x00 }, - { XFER_PIO_3, 0x43, 0x00 }, - { XFER_PIO_2, 0x78, 0x00 }, - { XFER_PIO_1, 0x7a, 0x00 }, - { XFER_PIO_0, 0x70, 0x00 }, - { 0, 0x00, 0x00 } -}; - -/* - * TO DO: active tuning and correction of cards without a bios. - */ -static u8 pci_bus_clock_list (u8 speed, struct chipset_bus_clock_list_entry * chipset_table) -{ - for ( ; chipset_table->xfer_speed ; chipset_table++) - if (chipset_table->xfer_speed == speed) { - return chipset_table->chipset_settings; - } - return chipset_table->chipset_settings; -} - -static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entry * chipset_table) -{ - for ( ; chipset_table->xfer_speed ; chipset_table++) - if (chipset_table->xfer_speed == speed) { - return chipset_table->ultra_settings; - } - return chipset_table->ultra_settings; -} - -static void aec6210_set_mode(ide_hwif_t *hwif, ide_drive_t *drive) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct chipset_bus_clock_list_entry *bus_clock = host->host_priv; - u16 d_conf = 0; - u8 ultra = 0, ultra_conf = 0; - u8 tmp0 = 0, tmp1 = 0, tmp2 = 0; - const u8 speed = drive->dma_mode; - unsigned long flags; - - local_irq_save(flags); - /* 0x40|(2*drive->dn): Active, 0x41|(2*drive->dn): Recovery */ - pci_read_config_word(dev, 0x40|(2*drive->dn), &d_conf); - tmp0 = pci_bus_clock_list(speed, bus_clock); - d_conf = ((tmp0 & 0xf0) << 4) | (tmp0 & 0xf); - pci_write_config_word(dev, 0x40|(2*drive->dn), d_conf); - - tmp1 = 0x00; - tmp2 = 0x00; - pci_read_config_byte(dev, 0x54, &ultra); - tmp1 = ((0x00 << (2*drive->dn)) | (ultra & ~(3 << (2*drive->dn)))); - ultra_conf = pci_bus_clock_list_ultra(speed, bus_clock); - tmp2 = ((ultra_conf << (2*drive->dn)) | (tmp1 & ~(3 << (2*drive->dn)))); - pci_write_config_byte(dev, 0x54, tmp2); - local_irq_restore(flags); -} - -static void aec6260_set_mode(ide_hwif_t *hwif, ide_drive_t *drive) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct chipset_bus_clock_list_entry *bus_clock = host->host_priv; - u8 unit = drive->dn & 1; - u8 tmp1 = 0, tmp2 = 0; - u8 ultra = 0, drive_conf = 0, ultra_conf = 0; - const u8 speed = drive->dma_mode; - unsigned long flags; - - local_irq_save(flags); - /* high 4-bits: Active, low 4-bits: Recovery */ - pci_read_config_byte(dev, 0x40|drive->dn, &drive_conf); - drive_conf = pci_bus_clock_list(speed, bus_clock); - pci_write_config_byte(dev, 0x40|drive->dn, drive_conf); - - pci_read_config_byte(dev, (0x44|hwif->channel), &ultra); - tmp1 = ((0x00 << (4*unit)) | (ultra & ~(7 << (4*unit)))); - ultra_conf = pci_bus_clock_list_ultra(speed, bus_clock); - tmp2 = ((ultra_conf << (4*unit)) | (tmp1 & ~(7 << (4*unit)))); - pci_write_config_byte(dev, (0x44|hwif->channel), tmp2); - local_irq_restore(flags); -} - -static void aec_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) -{ - drive->dma_mode = drive->pio_mode; - hwif->port_ops->set_dma_mode(hwif, drive); -} - -static int init_chipset_aec62xx(struct pci_dev *dev) -{ - /* These are necessary to get AEC6280 Macintosh cards to work */ - if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) || - (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)) { - u8 reg49h = 0, reg4ah = 0; - /* Clear reset and test bits. */ - pci_read_config_byte(dev, 0x49, ®49h); - pci_write_config_byte(dev, 0x49, reg49h & ~0x30); - /* Enable chip interrupt output. */ - pci_read_config_byte(dev, 0x4a, ®4ah); - pci_write_config_byte(dev, 0x4a, reg4ah & ~0x01); - /* Enable burst mode. */ - pci_read_config_byte(dev, 0x4a, ®4ah); - pci_write_config_byte(dev, 0x4a, reg4ah | 0x80); - } - - return 0; -} - -static u8 atp86x_cable_detect(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01; - - pci_read_config_byte(dev, 0x49, &ata66); - - return (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; -} - -static const struct ide_port_ops atp850_port_ops = { - .set_pio_mode = aec_set_pio_mode, - .set_dma_mode = aec6210_set_mode, -}; - -static const struct ide_port_ops atp86x_port_ops = { - .set_pio_mode = aec_set_pio_mode, - .set_dma_mode = aec6260_set_mode, - .cable_detect = atp86x_cable_detect, -}; - -static const struct ide_port_info aec62xx_chipsets[] = { - { /* 0: AEC6210 */ - .name = DRV_NAME, - .init_chipset = init_chipset_aec62xx, - .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, - .port_ops = &atp850_port_ops, - .host_flags = IDE_HFLAG_SERIALIZE | - IDE_HFLAG_NO_ATAPI_DMA | - IDE_HFLAG_NO_DSC | - IDE_HFLAG_OFF_BOARD, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA2, - }, - { /* 1: AEC6260 */ - .name = DRV_NAME, - .init_chipset = init_chipset_aec62xx, - .port_ops = &atp86x_port_ops, - .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_NO_AUTODMA | - IDE_HFLAG_OFF_BOARD, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA4, - }, - { /* 2: AEC6260R */ - .name = DRV_NAME, - .init_chipset = init_chipset_aec62xx, - .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, - .port_ops = &atp86x_port_ops, - .host_flags = IDE_HFLAG_NO_ATAPI_DMA | - IDE_HFLAG_NON_BOOTABLE, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA4, - }, - { /* 3: AEC6280 */ - .name = DRV_NAME, - .init_chipset = init_chipset_aec62xx, - .port_ops = &atp86x_port_ops, - .host_flags = IDE_HFLAG_NO_ATAPI_DMA | - IDE_HFLAG_OFF_BOARD, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA5, - }, - { /* 4: AEC6280R */ - .name = DRV_NAME, - .init_chipset = init_chipset_aec62xx, - .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, - .port_ops = &atp86x_port_ops, - .host_flags = IDE_HFLAG_NO_ATAPI_DMA | - IDE_HFLAG_OFF_BOARD, - .pio_mask = ATA_PIO4, - .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA5, - } -}; - -/** - * aec62xx_init_one - called when a AEC is found - * @dev: the aec62xx device - * @id: the matching pci id - * - * Called when the PCI registration layer (or the IDE initialization) - * finds a device matching our IDE device tables. - * - * NOTE: since we're going to modify the 'name' field for AEC-6[26]80[R] - * chips, pass a local copy of 'struct ide_port_info' down the call chain. - */ - -static int aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - const struct chipset_bus_clock_list_entry *bus_clock; - struct ide_port_info d; - u8 idx = id->driver_data; - int bus_speed = ide_pci_clk ? ide_pci_clk : 33; - int err; - - if (bus_speed <= 33) - bus_clock = aec6xxx_33_base; - else - bus_clock = aec6xxx_34_base; - - err = pci_enable_device(dev); - if (err) - return err; - - d = aec62xx_chipsets[idx]; - - if (idx == 3 || idx == 4) { - unsigned long dma_base = pci_resource_start(dev, 4); - - if (inb(dma_base + 2) & 0x10) { - printk(KERN_INFO DRV_NAME " %s: AEC6880%s card detected" - "\n", pci_name(dev), (idx == 4) ? "R" : ""); - d.udma_mask = ATA_UDMA6; - } - } - - err = ide_pci_init_one(dev, &d, (void *)bus_clock); - if (err) - pci_disable_device(dev); - - return err; -} - -static void aec62xx_remove(struct pci_dev *dev) -{ - ide_pci_remove(dev); - pci_disable_device(dev); -} - -static const struct pci_device_id aec62xx_pci_tbl[] = { - { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF), 0 }, - { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP860), 1 }, - { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R), 2 }, - { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP865), 3 }, - { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R), 4 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, aec62xx_pci_tbl); - -static struct pci_driver aec62xx_pci_driver = { - .name = "AEC62xx_IDE", - .id_table = aec62xx_pci_tbl, - .probe = aec62xx_init_one, - .remove = aec62xx_remove, - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init aec62xx_ide_init(void) -{ - return ide_pci_register_driver(&aec62xx_pci_driver); -} - -static void __exit aec62xx_ide_exit(void) -{ - pci_unregister_driver(&aec62xx_pci_driver); -} - -module_init(aec62xx_ide_init); -module_exit(aec62xx_ide_exit); - -MODULE_AUTHOR("Andre Hedrick"); -MODULE_DESCRIPTION("PCI driver module for ARTOP AEC62xx IDE"); -MODULE_LICENSE("GPL"); |