summaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/Kconfig1
-rw-r--r--drivers/i2c/busses/i2c-davinci.c11
-rw-r--r--drivers/i2c/busses/i2c-designware-baytrail.c17
-rw-r--r--drivers/i2c/busses/i2c-designware-core.c6
-rw-r--r--drivers/i2c/busses/i2c-designware-core.h1
-rw-r--r--drivers/i2c/busses/i2c-designware-platdrv.c67
-rw-r--r--drivers/i2c/busses/i2c-i801.c6
-rw-r--r--drivers/i2c/busses/i2c-imx.c5
-rw-r--r--drivers/i2c/busses/i2c-mv64xxx.c27
-rw-r--r--drivers/i2c/busses/i2c-rcar.c4
-rw-r--r--drivers/i2c/busses/i2c-rk3x.c2
-rw-r--r--drivers/i2c/busses/i2c-st.c2
-rw-r--r--drivers/i2c/busses/i2c-xiic.c4
-rw-r--r--drivers/i2c/i2c-core.c2
14 files changed, 92 insertions, 63 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index e24c2b680b47..7b0aa82ea38b 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -126,6 +126,7 @@ config I2C_I801
Sunrise Point-LP (PCH)
DNV (SOC)
Broxton (SOC)
+ Lewisburg (PCH)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index c5628a42170a..a8bdcb5292f5 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -202,8 +202,15 @@ static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev)
* d is always 6 on Keystone I2C controller
*/
- /* get minimum of 7 MHz clock, but max of 12 MHz */
- psc = (input_clock / 7000000) - 1;
+ /*
+ * Both Davinci and current Keystone User Guides recommend a value
+ * between 7MHz and 12MHz. In reality 7MHz module clock doesn't
+ * always produce enough margin between SDA and SCL transitions.
+ * Measurements show that the higher the module clock is, the
+ * bigger is the margin, providing more reliable communication.
+ * So we better target for 12MHz.
+ */
+ psc = (input_clock / 12000000) - 1;
if ((input_clock / (psc + 1)) > 12000000)
psc++; /* better to run under spec than over */
d = (psc >= 2) ? 5 : 7 - psc;
diff --git a/drivers/i2c/busses/i2c-designware-baytrail.c b/drivers/i2c/busses/i2c-designware-baytrail.c
index 7d7ae97476e2..e38c2bbba940 100644
--- a/drivers/i2c/busses/i2c-designware-baytrail.c
+++ b/drivers/i2c/busses/i2c-designware-baytrail.c
@@ -34,8 +34,7 @@ static int get_sem(struct device *dev, u32 *sem)
u32 data;
int ret;
- ret = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ, PUNIT_SEMAPHORE,
- &data);
+ ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, PUNIT_SEMAPHORE, &data);
if (ret) {
dev_err(dev, "iosf failed to read punit semaphore\n");
return ret;
@@ -50,21 +49,19 @@ static void reset_semaphore(struct device *dev)
{
u32 data;
- if (iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
- PUNIT_SEMAPHORE, &data)) {
+ if (iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, PUNIT_SEMAPHORE, &data)) {
dev_err(dev, "iosf failed to reset punit semaphore during read\n");
return;
}
data &= ~PUNIT_SEMAPHORE_BIT;
- if (iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
- PUNIT_SEMAPHORE, data))
+ if (iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE, PUNIT_SEMAPHORE, data))
dev_err(dev, "iosf failed to reset punit semaphore during write\n");
}
static int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
{
- u32 sem;
+ u32 sem = PUNIT_SEMAPHORE_ACQUIRE;
int ret;
unsigned long start, end;
@@ -77,8 +74,7 @@ static int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
return 0;
/* host driver writes to side band semaphore register */
- ret = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
- PUNIT_SEMAPHORE, PUNIT_SEMAPHORE_ACQUIRE);
+ ret = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE, PUNIT_SEMAPHORE, sem);
if (ret) {
dev_err(dev->dev, "iosf punit semaphore request failed\n");
return ret;
@@ -102,8 +98,7 @@ static int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
dev_err(dev->dev, "punit semaphore timed out, resetting\n");
reset_semaphore(dev->dev);
- ret = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
- PUNIT_SEMAPHORE, &sem);
+ ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, PUNIT_SEMAPHORE, &sem);
if (ret)
dev_err(dev->dev, "iosf failed to read punit semaphore\n");
else
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 8c48b27ba059..de7fbbb374cd 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -813,6 +813,12 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
tx_aborted:
if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err)
complete(&dev->cmd_complete);
+ else if (unlikely(dev->accessor_flags & ACCESS_INTR_MASK)) {
+ /* workaround to trigger pending interrupt */
+ stat = dw_readl(dev, DW_IC_INTR_MASK);
+ i2c_dw_disable_int(dev);
+ dw_writel(dev, stat, DW_IC_INTR_MASK);
+ }
return IRQ_HANDLED;
}
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 1d50898e7b24..9ffb63a60f95 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -111,6 +111,7 @@ struct dw_i2c_dev {
#define ACCESS_SWAP 0x00000001
#define ACCESS_16BIT 0x00000002
+#define ACCESS_INTR_MASK 0x00000004
extern int i2c_dw_init(struct dw_i2c_dev *dev);
extern void i2c_dw_disable(struct dw_i2c_dev *dev);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 809579ecb5a4..bf72ae740fc1 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -36,6 +36,7 @@
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
+#include <linux/property.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/acpi.h>
@@ -93,6 +94,7 @@ static void dw_i2c_acpi_params(struct platform_device *pdev, char method[],
static int dw_i2c_acpi_configure(struct platform_device *pdev)
{
struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+ const struct acpi_device_id *id;
dev->adapter.nr = -1;
dev->tx_fifo_depth = 32;
@@ -106,6 +108,10 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev)
dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt,
&dev->sda_hold_time);
+ id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
+ if (id && id->driver_data)
+ dev->accessor_flags |= (u32)id->driver_data;
+
return 0;
}
@@ -116,7 +122,8 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = {
{ "INT3433", 0 },
{ "80860F41", 0 },
{ "808622C1", 0 },
- { "AMD0010", 0 },
+ { "AMD0010", ACCESS_INTR_MASK },
+ { "APMC0D0F", 0 },
{ }
};
MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);
@@ -129,10 +136,10 @@ static inline int dw_i2c_acpi_configure(struct platform_device *pdev)
static int dw_i2c_plat_probe(struct platform_device *pdev)
{
+ struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct dw_i2c_dev *dev;
struct i2c_adapter *adap;
struct resource *mem;
- struct dw_i2c_platform_data *pdata;
int irq, r;
u32 clk_freq, ht = 0;
@@ -156,33 +163,28 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
/* fast mode by default because of legacy reasons */
clk_freq = 400000;
- if (has_acpi_companion(&pdev->dev)) {
- dw_i2c_acpi_configure(pdev);
- } else if (pdev->dev.of_node) {
- of_property_read_u32(pdev->dev.of_node,
- "i2c-sda-hold-time-ns", &ht);
-
- of_property_read_u32(pdev->dev.of_node,
- "i2c-sda-falling-time-ns",
- &dev->sda_falling_time);
- of_property_read_u32(pdev->dev.of_node,
- "i2c-scl-falling-time-ns",
- &dev->scl_falling_time);
-
- of_property_read_u32(pdev->dev.of_node, "clock-frequency",
- &clk_freq);
-
- /* Only standard mode at 100kHz and fast mode at 400kHz
- * are supported.
- */
- if (clk_freq != 100000 && clk_freq != 400000) {
- dev_err(&pdev->dev, "Only 100kHz and 400kHz supported");
- return -EINVAL;
- }
+ if (pdata) {
+ clk_freq = pdata->i2c_scl_freq;
} else {
- pdata = dev_get_platdata(&pdev->dev);
- if (pdata)
- clk_freq = pdata->i2c_scl_freq;
+ device_property_read_u32(&pdev->dev, "i2c-sda-hold-time-ns",
+ &ht);
+ device_property_read_u32(&pdev->dev, "i2c-sda-falling-time-ns",
+ &dev->sda_falling_time);
+ device_property_read_u32(&pdev->dev, "i2c-scl-falling-time-ns",
+ &dev->scl_falling_time);
+ device_property_read_u32(&pdev->dev, "clock-frequency",
+ &clk_freq);
+ }
+
+ if (has_acpi_companion(&pdev->dev))
+ dw_i2c_acpi_configure(pdev);
+
+ /*
+ * Only standard mode at 100kHz and fast mode at 400kHz are supported.
+ */
+ if (clk_freq != 100000 && clk_freq != 400000) {
+ dev_err(&pdev->dev, "Only 100kHz and 400kHz supported");
+ return -EINVAL;
}
r = i2c_dw_eval_lock_support(dev);
@@ -240,12 +242,10 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
}
r = i2c_dw_probe(dev);
- if (r) {
+ if (r && !dev->pm_runtime_disabled)
pm_runtime_disable(&pdev->dev);
- return r;
- }
- return 0;
+ return r;
}
static int dw_i2c_plat_remove(struct platform_device *pdev)
@@ -260,7 +260,8 @@ static int dw_i2c_plat_remove(struct platform_device *pdev)
pm_runtime_dont_use_autosuspend(&pdev->dev);
pm_runtime_put_sync(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
+ if (!dev->pm_runtime_disabled)
+ pm_runtime_disable(&pdev->dev);
return 0;
}
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index c306751ceadb..f62d69799a9c 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -62,6 +62,8 @@
* Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes
* DNV (SOC) 0x19df 32 hard yes yes yes
* Broxton (SOC) 0x5ad4 32 hard yes yes yes
+ * Lewisburg (PCH) 0xa1a3 32 hard yes yes yes
+ * Lewisburg Supersku (PCH) 0xa223 32 hard yes yes yes
*
* Features supported by this driver:
* Software PEC no
@@ -206,6 +208,8 @@
#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23
#define PCI_DEVICE_ID_INTEL_DNV_SMBUS 0x19df
#define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4
+#define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS 0xa1a3
+#define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xa223
struct i801_mux_config {
char *gpio_chip;
@@ -869,6 +873,8 @@ static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BROXTON_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) },
{ 0, }
};
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 1e4d99da4164..d4d853680ae4 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -50,6 +50,7 @@
#include <linux/of_device.h>
#include <linux/of_dma.h>
#include <linux/of_gpio.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/platform_data/i2c-imx.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
@@ -1118,6 +1119,8 @@ static int i2c_imx_probe(struct platform_device *pdev)
i2c_imx, IMX_I2C_I2CR);
imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
+ i2c_imx_init_recovery_info(i2c_imx, pdev);
+
/* Add I2C adapter */
ret = i2c_add_numbered_adapter(&i2c_imx->adapter);
if (ret < 0) {
@@ -1125,8 +1128,6 @@ static int i2c_imx_probe(struct platform_device *pdev)
goto clk_disable;
}
- i2c_imx_init_recovery_info(i2c_imx, pdev);
-
/* Set up platform driver data */
platform_set_drvdata(pdev, i2c_imx);
clk_disable_unprepare(i2c_imx->clk);
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 5801227b97ab..43207f52e5a3 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -146,6 +146,8 @@ struct mv64xxx_i2c_data {
bool errata_delay;
struct reset_control *rstc;
bool irq_clear_inverted;
+ /* Clk div is 2 to the power n, not 2 to the power n + 1 */
+ bool clk_n_base_0;
};
static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_mv64xxx = {
@@ -757,25 +759,29 @@ MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table);
#ifdef CONFIG_OF
#ifdef CONFIG_HAVE_CLK
static int
-mv64xxx_calc_freq(const int tclk, const int n, const int m)
+mv64xxx_calc_freq(struct mv64xxx_i2c_data *drv_data,
+ const int tclk, const int n, const int m)
{
- return tclk / (10 * (m + 1) * (2 << n));
+ if (drv_data->clk_n_base_0)
+ return tclk / (10 * (m + 1) * (1 << n));
+ else
+ return tclk / (10 * (m + 1) * (2 << n));
}
static bool
-mv64xxx_find_baud_factors(const u32 req_freq, const u32 tclk, u32 *best_n,
- u32 *best_m)
+mv64xxx_find_baud_factors(struct mv64xxx_i2c_data *drv_data,
+ const u32 req_freq, const u32 tclk)
{
int freq, delta, best_delta = INT_MAX;
int m, n;
for (n = 0; n <= 7; n++)
for (m = 0; m <= 15; m++) {
- freq = mv64xxx_calc_freq(tclk, n, m);
+ freq = mv64xxx_calc_freq(drv_data, tclk, n, m);
delta = req_freq - freq;
if (delta >= 0 && delta < best_delta) {
- *best_m = m;
- *best_n = n;
+ drv_data->freq_m = m;
+ drv_data->freq_n = n;
best_delta = delta;
}
if (best_delta == 0)
@@ -813,8 +819,11 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
if (of_property_read_u32(np, "clock-frequency", &bus_freq))
bus_freq = 100000; /* 100kHz by default */
- if (!mv64xxx_find_baud_factors(bus_freq, tclk,
- &drv_data->freq_n, &drv_data->freq_m)) {
+ if (of_device_is_compatible(np, "allwinner,sun4i-a10-i2c") ||
+ of_device_is_compatible(np, "allwinner,sun6i-a31-i2c"))
+ drv_data->clk_n_base_0 = true;
+
+ if (!mv64xxx_find_baud_factors(drv_data, bus_freq, tclk)) {
rc = -EINVAL;
goto out;
}
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index b0ae560b38c3..599c0d7bd906 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -576,7 +576,7 @@ static int rcar_reg_slave(struct i2c_client *slave)
if (slave->flags & I2C_CLIENT_TEN)
return -EAFNOSUPPORT;
- pm_runtime_forbid(rcar_i2c_priv_to_dev(priv));
+ pm_runtime_get_sync(rcar_i2c_priv_to_dev(priv));
priv->slave = slave;
rcar_i2c_write(priv, ICSAR, slave->addr);
@@ -598,7 +598,7 @@ static int rcar_unreg_slave(struct i2c_client *slave)
priv->slave = NULL;
- pm_runtime_allow(rcar_i2c_priv_to_dev(priv));
+ pm_runtime_put(rcar_i2c_priv_to_dev(priv));
return 0;
}
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index c1935ebd6a9c..9096d17beb5b 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -908,7 +908,7 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
&i2c->scl_fall_ns))
i2c->scl_fall_ns = 300;
if (of_property_read_u32(pdev->dev.of_node, "i2c-sda-falling-time-ns",
- &i2c->scl_fall_ns))
+ &i2c->sda_fall_ns))
i2c->sda_fall_ns = i2c->scl_fall_ns;
strlcpy(i2c->adap.name, "rk3x-i2c", sizeof(i2c->adap.name));
diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c
index ea72dca32fdf..25020ec777c9 100644
--- a/drivers/i2c/busses/i2c-st.c
+++ b/drivers/i2c/busses/i2c-st.c
@@ -822,7 +822,7 @@ static int st_i2c_probe(struct platform_device *pdev)
adap = &i2c_dev->adap;
i2c_set_adapdata(adap, i2c_dev);
- snprintf(adap->name, sizeof(adap->name), "ST I2C(0x%pa)", &res->start);
+ snprintf(adap->name, sizeof(adap->name), "ST I2C(%pa)", &res->start);
adap->owner = THIS_MODULE;
adap->timeout = 2 * HZ;
adap->retries = 0;
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index e23a7b068c60..0b20449e48cf 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -662,8 +662,10 @@ static void __xiic_start_xfer(struct xiic_i2c *i2c)
static void xiic_start_xfer(struct xiic_i2c *i2c)
{
-
+ spin_lock(&i2c->lock);
+ xiic_reinit(i2c);
__xiic_start_xfer(i2c);
+ spin_unlock(&i2c->lock);
}
static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 040af5cc8143..ba8eb087f224 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -715,7 +715,7 @@ static int i2c_device_probe(struct device *dev)
if (wakeirq > 0 && wakeirq != client->irq)
status = dev_pm_set_dedicated_wake_irq(dev, wakeirq);
else if (client->irq > 0)
- status = dev_pm_set_wake_irq(dev, wakeirq);
+ status = dev_pm_set_wake_irq(dev, client->irq);
else
status = 0;
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-19 07:59:03 +0300