diff options
Diffstat (limited to 'drivers/i2c')
32 files changed, 1565 insertions, 368 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 08b86178e8fb..7b0aa82ea38b 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -124,6 +124,9 @@ config I2C_I801 BayTrail (SOC) Sunrise Point-H (PCH) Sunrise Point-LP (PCH) + DNV (SOC) + Broxton (SOC) + Lewisburg (PCH) This driver can also be built as a module. If so, the module will be called i2c-i801. @@ -422,7 +425,7 @@ config I2C_BLACKFIN_TWI_CLK_KHZ config I2C_CADENCE tristate "Cadence I2C Controller" - depends on ARCH_ZYNQ + depends on ARCH_ZYNQ || ARM64 help Say yes here to select Cadence I2C Host Controller. This controller is e.g. used by Xilinx Zynq. @@ -582,10 +585,10 @@ config I2C_IMG config I2C_IMX tristate "IMX I2C interface" - depends on ARCH_MXC + depends on ARCH_MXC || ARCH_LAYERSCAPE help Say Y here if you want to use the IIC bus controller on - the Freescale i.MX/MXC processors. + the Freescale i.MX/MXC or Layerscape processors. This driver can also be built as a module. If so, the module will be called i2c-imx. @@ -902,6 +905,22 @@ config I2C_TEGRA If you say yes to this option, support will be included for the I2C controller embedded in NVIDIA Tegra SOCs +config I2C_UNIPHIER + tristate "UniPhier FIFO-less I2C controller" + depends on ARCH_UNIPHIER + help + If you say yes to this option, support will be included for + the UniPhier FIFO-less I2C interface embedded in PH1-LD4, PH1-sLD8, + or older UniPhier SoCs. + +config I2C_UNIPHIER_F + tristate "UniPhier FIFO-builtin I2C controller" + depends on ARCH_UNIPHIER + help + If you say yes to this option, support will be included for + the UniPhier FIFO-builtin I2C interface embedded in PH1-Pro4, + PH1-Pro5, or newer UniPhier SoCs. + config I2C_VERSATILE tristate "ARM Versatile/Realview I2C bus support" depends on ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 6df3b303bd09..37f2819b4560 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -87,6 +87,8 @@ obj-$(CONFIG_I2C_ST) += i2c-st.o obj-$(CONFIG_I2C_STU300) += i2c-stu300.o obj-$(CONFIG_I2C_SUN6I_P2WI) += i2c-sun6i-p2wi.o obj-$(CONFIG_I2C_TEGRA) += i2c-tegra.o +obj-$(CONFIG_I2C_UNIPHIER) += i2c-uniphier.o +obj-$(CONFIG_I2C_UNIPHIER_F) += i2c-uniphier-f.o obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o obj-$(CONFIG_I2C_WMT) += i2c-wmt.o obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c index 1c758cd1e1ba..10835d1f559b 100644 --- a/drivers/i2c/busses/i2c-at91.c +++ b/drivers/i2c/busses/i2c-at91.c @@ -347,8 +347,14 @@ error: static void at91_twi_read_next_byte(struct at91_twi_dev *dev) { - if (!dev->buf_len) + /* + * If we are in this case, it means there is garbage data in RHR, so + * delete them. + */ + if (!dev->buf_len) { + at91_twi_read(dev, AT91_TWI_RHR); return; + } /* 8bit read works with and without FIFO */ *dev->buf = readb_relaxed(dev->base + AT91_TWI_RHR); @@ -465,19 +471,73 @@ static irqreturn_t atmel_twi_interrupt(int irq, void *dev_id) if (!irqstatus) return IRQ_NONE; - else if (irqstatus & AT91_TWI_RXRDY) + /* + * In reception, the behavior of the twi device (before sama5d2) is + * weird. There is some magic about RXRDY flag! When a data has been + * almost received, the reception of a new one is anticipated if there + * is no stop command to send. That is the reason why ask for sending + * the stop command not on the last data but on the second last one. + * + * Unfortunately, we could still have the RXRDY flag set even if the + * transfer is done and we have read the last data. It might happen + * when the i2c slave device sends too quickly data after receiving the + * ack from the master. The data has been almost received before having + * the order to send stop. In this case, sending the stop command could + * cause a RXRDY interrupt with a TXCOMP one. It is better to manage + * the RXRDY interrupt first in order to not keep garbage data in the + * Receive Holding Register for the next transfer. + */ + if (irqstatus & AT91_TWI_RXRDY) at91_twi_read_next_byte(dev); - else if (irqstatus & AT91_TWI_TXRDY) - at91_twi_write_next_byte(dev); - - /* catch error flags */ - dev->transfer_status |= status; + /* + * When a NACK condition is detected, the I2C controller sets the NACK, + * TXCOMP and TXRDY bits all together in the Status Register (SR). + * + * 1 - Handling NACK errors with CPU write transfer. + * + * In such case, we should not write the next byte into the Transmit + * Holding Register (THR) otherwise the I2C controller would start a new + * transfer and the I2C slave is likely to reply by another NACK. + * + * 2 - Handling NACK errors with DMA write transfer. + * + * By setting the TXRDY bit in the SR, the I2C controller also triggers + * the DMA controller to write the next data into the THR. Then the + * result depends on the hardware version of the I2C controller. + * + * 2a - Without support of the Alternative Command mode. + * + * This is the worst case: the DMA controller is triggered to write the + * next data into the THR, hence starting a new transfer: the I2C slave + * is likely to reply by another NACK. + * Concurrently, this interrupt handler is likely to be called to manage + * the first NACK before the I2C controller detects the second NACK and + * sets once again the NACK bit into the SR. + * When handling the first NACK, this interrupt handler disables the I2C + * controller interruptions, especially the NACK interrupt. + * Hence, the NACK bit is pending into the SR. This is why we should + * read the SR to clear all pending interrupts at the beginning of + * at91_do_twi_transfer() before actually starting a new transfer. + * + * 2b - With support of the Alternative Command mode. + * + * When a NACK condition is detected, the I2C controller also locks the + * THR (and sets the LOCK bit in the SR): even though the DMA controller + * is triggered by the TXRDY bit to write the next data into the THR, + * this data actually won't go on the I2C bus hence a second NACK is not + * generated. + */ if (irqstatus & (AT91_TWI_TXCOMP | AT91_TWI_NACK)) { at91_disable_twi_interrupts(dev); complete(&dev->cmd_complete); + } else if (irqstatus & AT91_TWI_TXRDY) { + at91_twi_write_next_byte(dev); } + /* catch error flags */ + dev->transfer_status |= status; + return IRQ_HANDLED; } @@ -537,6 +597,9 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev) reinit_completion(&dev->cmd_complete); dev->transfer_status = 0; + /* Clear pending interrupts, such as NACK. */ + at91_twi_read(dev, AT91_TWI_SR); + if (dev->fifo_size) { unsigned fifo_mr = at91_twi_read(dev, AT91_TWI_FMR); @@ -558,11 +621,6 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev) } else if (dev->msg->flags & I2C_M_RD) { unsigned start_flags = AT91_TWI_START; - if (at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_RXRDY) { - dev_err(dev->dev, "RXRDY still set!"); - at91_twi_read(dev, AT91_TWI_RHR); - } - /* if only one byte is to be read, immediately stop transfer */ if (!has_alt_cmd && dev->buf_len <= 1 && !(dev->msg->flags & I2C_M_RECV_LEN)) diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c index a6aae84e5706..5bcb1f0bb334 100644 --- a/drivers/i2c/busses/i2c-au1550.c +++ b/drivers/i2c/busses/i2c-au1550.c @@ -48,7 +48,6 @@ struct i2c_au1550_data { void __iomem *psc_base; int xfer_timeout; struct i2c_adapter adap; - struct resource *ioarea; }; static inline void WR(struct i2c_au1550_data *a, int r, unsigned long v) @@ -284,10 +283,10 @@ static void i2c_au1550_setup(struct i2c_au1550_data *priv) /* Set the protocol timer values. See Table 71 in the * Au1550 Data Book for standard timing values. */ - WR(priv, PSC_SMBTMR, PSC_SMBTMR_SET_TH(0) | PSC_SMBTMR_SET_PS(15) | \ - PSC_SMBTMR_SET_PU(15) | PSC_SMBTMR_SET_SH(15) | \ - PSC_SMBTMR_SET_SU(15) | PSC_SMBTMR_SET_CL(15) | \ - PSC_SMBTMR_SET_CH(15)); + WR(priv, PSC_SMBTMR, PSC_SMBTMR_SET_TH(0) | PSC_SMBTMR_SET_PS(20) | \ + PSC_SMBTMR_SET_PU(20) | PSC_SMBTMR_SET_SH(20) | \ + PSC_SMBTMR_SET_SU(20) | PSC_SMBTMR_SET_CL(20) | \ + PSC_SMBTMR_SET_CH(20)); cfg |= PSC_SMBCFG_DE_ENABLE; WR(priv, PSC_SMBCFG, cfg); @@ -315,30 +314,16 @@ i2c_au1550_probe(struct platform_device *pdev) struct resource *r; int ret; - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!r) { - ret = -ENODEV; - goto out; - } + priv = devm_kzalloc(&pdev->dev, sizeof(struct i2c_au1550_data), + GFP_KERNEL); + if (!priv) + return -ENOMEM; - priv = kzalloc(sizeof(struct i2c_au1550_data), GFP_KERNEL); - if (!priv) { - ret = -ENOMEM; - goto out; - } - - priv->ioarea = request_mem_region(r->start, resource_size(r), - pdev->name); - if (!priv->ioarea) { - ret = -EBUSY; - goto out_mem; - } + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->psc_base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(priv->psc_base)) + return PTR_ERR(priv->psc_base); - priv->psc_base = ioremap(r->start, resource_size(r)); - if (!priv->psc_base) { - ret = -EIO; - goto out_map; - } priv->xfer_timeout = 200; priv->adap.nr = pdev->id; @@ -351,20 +336,13 @@ i2c_au1550_probe(struct platform_device *pdev) i2c_au1550_setup(priv); ret = i2c_add_numbered_adapter(&priv->adap); - if (ret == 0) { - platform_set_drvdata(pdev, priv); - return 0; + if (ret) { + i2c_au1550_disable(priv); + return ret; } - i2c_au1550_disable(priv); - iounmap(priv->psc_base); -out_map: - release_resource(priv->ioarea); - kfree(priv->ioarea); -out_mem: - kfree(priv); -out: - return ret; + platform_set_drvdata(pdev, priv); + return 0; } static int i2c_au1550_remove(struct platform_device *pdev) @@ -373,10 +351,6 @@ static int i2c_au1550_remove(struct platform_device *pdev) i2c_del_adapter(&priv->adap); i2c_au1550_disable(priv); - iounmap(priv->psc_base); - release_resource(priv->ioarea); - kfree(priv->ioarea); - kfree(priv); return 0; } diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index 3fbb9a035532..c5628a42170a 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -181,6 +181,7 @@ static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev) u32 clkh; u32 clkl; u32 input_clock = clk_get_rate(dev->clk); + struct device_node *of_node = dev->dev->of_node; /* NOTE: I2C Clock divider programming info * As per I2C specs the following formulas provide prescaler @@ -196,6 +197,9 @@ static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev) * where if PSC == 0, d = 7, * if PSC == 1, d = 6 * if PSC > 1 , d = 5 + * + * Note: + * d is always 6 on Keystone I2C controller */ /* get minimum of 7 MHz clock, but max of 12 MHz */ @@ -204,6 +208,9 @@ static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev) psc++; /* better to run under spec than over */ d = (psc >= 2) ? 5 : 7 - psc; + if (of_node && of_device_is_compatible(of_node, "ti,keystone-i2c")) + d = 6; + clk = ((input_clock / (psc + 1)) / (pdata->bus_freq * 1000)); /* Avoid driving the bus too fast because of rounding errors above */ if (input_clock / (psc + 1) / clk > pdata->bus_freq * 1000) @@ -726,6 +733,7 @@ static struct i2c_algorithm i2c_davinci_algo = { static const struct of_device_id davinci_i2c_of_match[] = { {.compatible = "ti,davinci-i2c", }, + {.compatible = "ti,keystone-i2c", }, {}, }; MODULE_DEVICE_TABLE(of, davinci_i2c_of_match); diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index 7441cdc1b34a..8c48b27ba059 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -165,7 +165,7 @@ static char *abort_sources[] = { "lost arbitration", }; -u32 dw_readl(struct dw_i2c_dev *dev, int offset) +static u32 dw_readl(struct dw_i2c_dev *dev, int offset) { u32 value; @@ -181,7 +181,7 @@ u32 dw_readl(struct dw_i2c_dev *dev, int offset) return value; } -void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset) +static void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset) { if (dev->accessor_flags & ACCESS_SWAP) b = swab32(b); @@ -438,7 +438,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev) __i2c_dw_enable(dev, true); /* Clear and enable interrupts */ - i2c_dw_clear_int(dev); + dw_readl(dev, DW_IC_CLR_INTR); dw_writel(dev, DW_IC_INTR_DEFAULT_MASK, DW_IC_INTR_MASK); } @@ -618,7 +618,7 @@ static int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev) /* * Prepare controller for a transaction and call i2c_dw_xfer_msg */ -int +static int i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) { struct dw_i2c_dev *dev = i2c_get_adapdata(adap); @@ -702,14 +702,17 @@ done_nolock: return ret; } -EXPORT_SYMBOL_GPL(i2c_dw_xfer); -u32 i2c_dw_func(struct i2c_adapter *adap) +static u32 i2c_dw_func(struct i2c_adapter *adap) { struct dw_i2c_dev *dev = i2c_get_adapdata(adap); return dev->functionality; } -EXPORT_SYMBOL_GPL(i2c_dw_func); + +static struct i2c_algorithm i2c_dw_algo = { + .master_xfer = i2c_dw_xfer, + .functionality = i2c_dw_func, +}; static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev) { @@ -770,7 +773,7 @@ static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev) * Interrupt service routine. This gets called whenever an I2C interrupt * occurs. */ -irqreturn_t i2c_dw_isr(int this_irq, void *dev_id) +static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id) { struct dw_i2c_dev *dev = dev_id; u32 stat, enabled; @@ -813,20 +816,6 @@ tx_aborted: return IRQ_HANDLED; } -EXPORT_SYMBOL_GPL(i2c_dw_isr); - -void i2c_dw_enable(struct dw_i2c_dev *dev) -{ - /* Enable the adapter */ - __i2c_dw_enable(dev, true); -} -EXPORT_SYMBOL_GPL(i2c_dw_enable); - -u32 i2c_dw_is_enabled(struct dw_i2c_dev *dev) -{ - return dw_readl(dev, DW_IC_ENABLE); -} -EXPORT_SYMBOL_GPL(i2c_dw_is_enabled); void i2c_dw_disable(struct dw_i2c_dev *dev) { @@ -839,12 +828,6 @@ void i2c_dw_disable(struct dw_i2c_dev *dev) } EXPORT_SYMBOL_GPL(i2c_dw_disable); -void i2c_dw_clear_int(struct dw_i2c_dev *dev) -{ - dw_readl(dev, DW_IC_CLR_INTR); -} -EXPORT_SYMBOL_GPL(i2c_dw_clear_int); - void i2c_dw_disable_int(struct dw_i2c_dev *dev) { dw_writel(dev, 0, DW_IC_INTR_MASK); @@ -857,5 +840,40 @@ u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev) } EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param); +int i2c_dw_probe(struct dw_i2c_dev *dev) +{ + struct i2c_adapter *adap = &dev->adapter; + int r; + + init_completion(&dev->cmd_complete); + mutex_init(&dev->lock); + + r = i2c_dw_init(dev); + if (r) + return r; + + snprintf(adap->name, sizeof(adap->name), + "Synopsys DesignWare I2C adapter"); + adap->algo = &i2c_dw_algo; + adap->dev.parent = dev->dev; + i2c_set_adapdata(adap, dev); + + i2c_dw_disable_int(dev); + r = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, IRQF_SHARED, + dev_name(dev->dev), dev); + if (r) { + dev_err(dev->dev, "failure requesting irq %i: %d\n", + dev->irq, r); + return r; + } + + r = i2c_add_numbered_adapter(adap); + if (r) + dev_err(dev->dev, "failure adding adapter: %d\n", r); + + return r; +} +EXPORT_SYMBOL_GPL(i2c_dw_probe); + MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter core"); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index 9630222abf32..1d50898e7b24 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -112,19 +112,11 @@ struct dw_i2c_dev { #define ACCESS_SWAP 0x00000001 #define ACCESS_16BIT 0x00000002 -extern u32 dw_readl(struct dw_i2c_dev *dev, int offset); -extern void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset); extern int i2c_dw_init(struct dw_i2c_dev *dev); -extern int i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], - int num); -extern u32 i2c_dw_func(struct i2c_adapter *adap); -extern irqreturn_t i2c_dw_isr(int this_irq, void *dev_id); -extern void i2c_dw_enable(struct dw_i2c_dev *dev); -extern u32 i2c_dw_is_enabled(struct dw_i2c_dev *dev); extern void i2c_dw_disable(struct dw_i2c_dev *dev); -extern void i2c_dw_clear_int(struct dw_i2c_dev *dev); extern void i2c_dw_disable_int(struct dw_i2c_dev *dev); extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev); +extern int i2c_dw_probe(struct dw_i2c_dev *dev); #if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL) extern int i2c_dw_eval_lock_support(struct dw_i2c_dev *dev); diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index df23e8c30e6f..1543d35d228d 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -35,6 +35,7 @@ #include <linux/slab.h> #include <linux/pci.h> #include <linux/pm_runtime.h> +#include <linux/acpi.h> #include "i2c-designware-core.h" #define DRIVER_NAME "i2c-designware-pci" @@ -158,11 +159,6 @@ static struct dw_pci_controller dw_pci_controllers[] = { }, }; -static struct i2c_algorithm i2c_dw_algo = { - .master_xfer = i2c_dw_xfer, - .functionality = i2c_dw_func, -}; - #ifdef CONFIG_PM static int i2c_dw_pci_suspend(struct device *dev) { @@ -222,13 +218,12 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev, if (!dev) return -ENOMEM; - init_completion(&dev->cmd_complete); - mutex_init(&dev->lock); dev->clk = NULL; dev->controller = controller; dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz; dev->base = pcim_iomap_table(pdev)[0]; dev->dev = &pdev->dev; + dev->irq = pdev->irq; dev->functionality = controller->functionality | DW_DEFAULT_FUNCTIONALITY; @@ -246,34 +241,16 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev, dev->tx_fifo_depth = controller->tx_fifo_depth; dev->rx_fifo_depth = controller->rx_fifo_depth; - r = i2c_dw_init(dev); - if (r) - return r; adap = &dev->adapter; - i2c_set_adapdata(adap, dev); adap->owner = THIS_MODULE; adap->class = 0; - adap->algo = &i2c_dw_algo; - adap->dev.parent = &pdev->dev; + ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev)); adap->nr = controller->bus_num; - snprintf(adap->name, sizeof(adap->name), "i2c-designware-pci"); - - r = devm_request_irq(&pdev->dev, pdev->irq, i2c_dw_isr, - IRQF_SHARED | IRQF_COND_SUSPEND, adap->name, dev); - if (r) { - dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq); - return r; - } - - i2c_dw_disable_int(dev); - i2c_dw_clear_int(dev); - r = i2c_add_numbered_adapter(adap); - if (r) { - dev_err(&pdev->dev, "failure adding adapter\n"); + r = i2c_dw_probe(dev); + if (r) return r; - } pm_runtime_set_autosuspend_delay(&pdev->dev, 1000); pm_runtime_use_autosuspend(&pdev->dev); diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 472b88285c75..809579ecb5a4 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -42,10 +42,6 @@ #include <linux/platform_data/i2c-designware.h> #include "i2c-designware-core.h" -static struct i2c_algorithm i2c_dw_algo = { - .master_xfer = i2c_dw_xfer, - .functionality = i2c_dw_func, -}; static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev) { return clk_get_rate(dev->clk)/1000; @@ -97,7 +93,6 @@ static void dw_i2c_acpi_params(struct platform_device *pdev, char method[], static int dw_i2c_acpi_configure(struct platform_device *pdev) { struct dw_i2c_dev *dev = platform_get_drvdata(pdev); - const struct acpi_device_id *id; dev->adapter.nr = -1; dev->tx_fifo_depth = 32; @@ -111,29 +106,9 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev) dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, &dev->sda_hold_time); - /* - * Provide a way for Designware I2C host controllers that are not - * based on Intel LPSS to specify their input clock frequency via - * id->driver_data. - */ - id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev); - if (id && id->driver_data) - clk_register_fixed_rate(&pdev->dev, dev_name(&pdev->dev), NULL, - CLK_IS_ROOT, id->driver_data); - return 0; } -static void dw_i2c_acpi_unconfigure(struct platform_device *pdev) -{ - struct dw_i2c_dev *dev = platform_get_drvdata(pdev); - const struct acpi_device_id *id; - - id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev); - if (id && id->driver_data) - clk_unregister(dev->clk); -} - static const struct acpi_device_id dw_i2c_acpi_match[] = { { "INT33C2", 0 }, { "INT33C3", 0 }, @@ -141,7 +116,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = { { "INT3433", 0 }, { "80860F41", 0 }, { "808622C1", 0 }, - { "AMD0010", 133 * 1000 * 1000 }, + { "AMD0010", 0 }, { } }; MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match); @@ -150,10 +125,9 @@ static inline int dw_i2c_acpi_configure(struct platform_device *pdev) { return -ENODEV; } -static inline void dw_i2c_acpi_unconfigure(struct platform_device *pdev) { } #endif -static int dw_i2c_probe(struct platform_device *pdev) +static int dw_i2c_plat_probe(struct platform_device *pdev) { struct dw_i2c_dev *dev; struct i2c_adapter *adap; @@ -175,8 +149,6 @@ static int dw_i2c_probe(struct platform_device *pdev) if (IS_ERR(dev->base)) return PTR_ERR(dev->base); - init_completion(&dev->cmd_complete); - mutex_init(&dev->lock); dev->dev = &pdev->dev; dev->irq = irq; platform_set_drvdata(pdev, dev); @@ -251,26 +223,11 @@ static int dw_i2c_probe(struct platform_device *pdev) dev->rx_fifo_depth = ((param1 >> 8) & 0xff) + 1; dev->adapter.nr = pdev->id; } - r = i2c_dw_init(dev); - if (r) - return r; - - i2c_dw_disable_int(dev); - r = devm_request_irq(&pdev->dev, dev->irq, i2c_dw_isr, IRQF_SHARED, - pdev->name, dev); - if (r) { - dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq); - return r; - } adap = &dev->adapter; - i2c_set_adapdata(adap, dev); adap->owner = THIS_MODULE; adap->class = I2C_CLASS_DEPRECATED; - strlcpy(adap->name, "Synopsys DesignWare I2C adapter", - sizeof(adap->name)); - adap->algo = &i2c_dw_algo; - adap->dev.parent = &pdev->dev; + ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev)); adap->dev.of_node = pdev->dev.of_node; if (dev->pm_runtime_disabled) { @@ -282,9 +239,8 @@ static int dw_i2c_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); } - r = i2c_add_numbered_adapter(adap); + r = i2c_dw_probe(dev); if (r) { - dev_err(&pdev->dev, "failure adding adapter\n"); pm_runtime_disable(&pdev->dev); return r; } @@ -292,7 +248,7 @@ static int dw_i2c_probe(struct platform_device *pdev) return 0; } -static int dw_i2c_remove(struct platform_device *pdev) +static int dw_i2c_plat_remove(struct platform_device *pdev) { struct dw_i2c_dev *dev = platform_get_drvdata(pdev); @@ -306,9 +262,6 @@ static int dw_i2c_remove(struct platform_device *pdev) pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); - if (has_acpi_companion(&pdev->dev)) - dw_i2c_acpi_unconfigure(pdev); - return 0; } @@ -321,23 +274,23 @@ MODULE_DEVICE_TABLE(of, dw_i2c_of_match); #endif #ifdef CONFIG_PM_SLEEP -static int dw_i2c_prepare(struct device *dev) +static int dw_i2c_plat_prepare(struct device *dev) { return pm_runtime_suspended(dev); } -static void dw_i2c_complete(struct device *dev) +static void dw_i2c_plat_complete(struct device *dev) { if (dev->power.direct_complete) pm_request_resume(dev); } #else -#define dw_i2c_prepare NULL -#define dw_i2c_complete NULL +#define dw_i2c_plat_prepare NULL +#define dw_i2c_plat_complete NULL #endif #ifdef CONFIG_PM -static int dw_i2c_suspend(struct device *dev) +static int dw_i2c_plat_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev); @@ -348,7 +301,7 @@ static int dw_i2c_suspend(struct device *dev) return 0; } -static int dw_i2c_resume(struct device *dev) +static int dw_i2c_plat_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev); @@ -362,10 +315,10 @@ static int dw_i2c_resume(struct device *dev) } static const struct dev_pm_ops dw_i2c_dev_pm_ops = { - .prepare = dw_i2c_prepare, - .complete = dw_i2c_complete, - SET_SYSTEM_SLEEP_PM_OPS(dw_i2c_suspend, dw_i2c_resume) - SET_RUNTIME_PM_OPS(dw_i2c_suspend, dw_i2c_resume, NULL) + .prepare = dw_i2c_plat_prepare, + .complete = dw_i2c_plat_complete, + SET_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume) + SET_RUNTIME_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume, NULL) }; #define DW_I2C_DEV_PMOPS (&dw_i2c_dev_pm_ops) @@ -377,8 +330,8 @@ static const struct dev_pm_ops dw_i2c_dev_pm_ops = { MODULE_ALIAS("platform:i2c_designware"); static struct platform_driver dw_i2c_driver = { - .probe = dw_i2c_probe, - .remove = dw_i2c_remove, + .probe = dw_i2c_plat_probe, + .remove = dw_i2c_plat_remove, .driver = { .name = "i2c_designware", .of_match_table = of_match_ptr(dw_i2c_of_match), diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index eaef9bc9d88c..f62d69799a9c 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -60,6 +60,10 @@ * BayTrail (SOC) 0x0f12 32 hard yes yes yes * Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes * Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes + * DNV (SOC) 0x19df 32 hard yes yes yes + * Broxton (SOC) 0x5ad4 32 hard yes yes yes + * Lewisburg (PCH) 0xa1a3 32 hard yes yes yes + * Lewisburg Supersku (PCH) 0xa223 32 hard yes yes yes * * Features supported by this driver: * Software PEC no @@ -202,6 +206,10 @@ #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23 +#define PCI_DEVICE_ID_INTEL_DNV_SMBUS 0x19df +#define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4 +#define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS 0xa1a3 +#define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xa223 struct i801_mux_config { char *gpio_chip; @@ -863,6 +871,10 @@ static const struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BROXTON_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) }, { 0, } }; @@ -1251,11 +1263,15 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) priv->adapter.owner = THIS_MODULE; priv->adapter.class = i801_get_adapter_class(priv); priv->adapter.algo = &smbus_algorithm; + priv->adapter.dev.parent = &dev->dev; + ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&dev->dev)); + priv->adapter.retries = 3; priv->pci_dev = dev; switch (dev->device) { case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS: case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS: + case PCI_DEVICE_ID_INTEL_DNV_SMBUS: priv->features |= FEATURE_I2C_BLOCK_READ; priv->features |= FEATURE_IRQ; priv->features |= FEATURE_SMBUS_PEC; @@ -1381,12 +1397,6 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) i801_add_tco(priv); - /* set up the sysfs linkage to our parent device */ - priv->adapter.dev.parent = &dev->dev; - - /* Retry up to 3 times on lost arbitration */ - priv->adapter.retries = 3; - snprintf(priv->adapter.name, sizeof(priv->adapter.name), "SMBus I801 adapter at %04lx", priv->smba); err = i2c_add_adapter(&priv->adapter); diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index 722f839cfa3c..ab492301581a 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -798,6 +798,7 @@ static const struct of_device_id ibm_iic_match[] = { { .compatible = "ibm,iic", }, {} }; +MODULE_DEVICE_TABLE(of, ibm_iic_match); static struct platform_driver ibm_iic_driver = { .driver = { diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c index 00ffd6613680..3795fe130ef2 100644 --- a/drivers/i2c/busses/i2c-img-scb.c +++ b/drivers/i2c/busses/i2c-img-scb.c @@ -278,8 +278,6 @@ #define ISR_COMPLETE(err) (ISR_COMPLETE_M | (ISR_STATUS_M & (err))) #define ISR_FATAL(err) (ISR_COMPLETE(err) | ISR_FATAL_M) -#define REL_SOC_IP_SCB_2_2_1 0x00020201 - enum img_i2c_mode { MODE_INACTIVE, MODE_RAW, @@ -536,6 +534,7 @@ static void img_i2c_read_fifo(struct img_i2c *i2c) u32 fifo_status; u8 data; + img_i2c_wr_rd_fence(i2c); fifo_status = img_i2c_readl(i2c, SCB_FIFO_STATUS_REG); if (fifo_status & FIFO_READ_EMPTY) break; @@ -544,7 +543,6 @@ static void img_i2c_read_fifo(struct img_i2c *i2c) *i2c->msg.buf = data; img_i2c_writel(i2c, SCB_READ_FIFO_REG, 0xff); - img_i2c_wr_rd_fence(i2c); i2c->msg.len--; i2c->msg.buf++; } @@ -556,12 +554,12 @@ static void img_i2c_write_fifo(struct img_i2c *i2c) while (i2c->msg.len) { u32 fifo_status; + img_i2c_wr_rd_fence(i2c); fifo_status = img_i2c_readl(i2c, SCB_FIFO_STATUS_REG); if (fifo_status & FIFO_WRITE_FULL) break; img_i2c_writel(i2c, SCB_WRITE_DATA_REG, *i2c->msg.buf); - img_i2c_wr_rd_fence(i2c); i2c->msg.len--; i2c->msg.buf++; } @@ -859,7 +857,7 @@ static unsigned int img_i2c_auto(struct img_i2c *i2c, } /* Enable transaction halt on start bit */ - if (!i2c->last_msg && i2c->line_status & LINESTAT_START_BIT_DET) { + if (!i2c->last_msg && line_status & LINESTAT_START_BIT_DET) { img_i2c_transaction_halt(i2c, true); /* we're no longer interested in the slave event */ i2c->int_enable &= ~INT_SLAVE_EVENT; @@ -1062,6 +1060,15 @@ static int img_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, i2c->last_msg = (i == num - 1); reinit_completion(&i2c->msg_complete); + /* + * Clear line status and all interrupts before starting a + * transfer, as we may have unserviced interrupts from + * previous transfers that might be handled in the context + * of the new transfer. + */ + img_i2c_writel(i2c, SCB_INT_CLEAR_REG, ~0); + img_i2c_writel(i2c, SCB_CLEAR_REG, ~0); + if (atomic) img_i2c_atomic_start(i2c); else if (msg->flags & I2C_M_RD) @@ -1120,13 +1127,8 @@ static int img_i2c_init(struct img_i2c *i2c) return -EINVAL; } - if (rev == REL_SOC_IP_SCB_2_2_1) { - i2c->need_wr_rd_fence = true; - dev_info(i2c->adap.dev.parent, "fence quirk enabled"); - } - - bitrate_khz = i2c->bitrate / 1000; - clk_khz = clk_get_rate(i2c->scb_clk) / 1000; + /* Fencing enabled by default. */ + i2c->need_wr_rd_fence = true; /* Determine what mode we're in from the bitrate */ timing = timings[0]; @@ -1136,6 +1138,17 @@ static int img_i2c_init(struct img_i2c *i2c) break; } } + if (i2c->bitrate > timings[ARRAY_SIZE(timings) - 1].max_bitrate) { + dev_warn(i2c->adap.dev.parent, + "requested bitrate (%u) is higher than the max bitrate supported (%u)\n", + i2c->bitrate, + timings[ARRAY_SIZE(timings) - 1].max_bitrate); + timing = timings[ARRAY_SIZE(timings) - 1]; + i2c->bitrate = timing.max_bitrate; + } + + bitrate_khz = i2c->bitrate / 1000; + clk_khz = clk_get_rate(i2c->scb_clk) / 1000; /* Find the prescale that would give us that inc (approx delay = 0) */ prescale = SCB_OPT_INC * clk_khz / (256 * 16 * bitrate_khz); @@ -1182,32 +1195,32 @@ static int img_i2c_init(struct img_i2c *i2c) ((bitrate_khz * clk_period) / 2)) int_bitrate++; - /* Setup TCKH value */ - tckh = timing.tckh / clk_period; - if (timing.tckh % clk_period) - tckh++; + /* + * Setup clock duty cycle, start with 50% and adjust TCKH and TCKL + * values from there if they don't meet minimum timing requirements + */ + tckh = int_bitrate / 2; + tckl = int_bitrate - tckh; - if (tckh > 0) - data = tckh - 1; - else - data = 0; + /* Adjust TCKH and TCKL values */ + data = DIV_ROUND_UP(timing.tckl, clk_period); - img_i2c_writel(i2c, SCB_TIME_TCKH_REG, data); + if (tckl < data) { + tckl = data; + tckh = int_bitrate - tckl; + } - /* Setup TCKL value */ - tckl = int_bitrate - tckh; + if (tckh > 0) + --tckh; if (tckl > 0) - data = tckl - 1; - else - data = 0; + --tckl; - img_i2c_writel(i2c, SCB_TIME_TCKL_REG, data); + img_i2c_writel(i2c, SCB_TIME_TCKH_REG, tckh); + img_i2c_writel(i2c, SCB_TIME_TCKL_REG, tckl); /* Setup TSDH value */ - tsdh = timing.tsdh / clk_period; - if (timing.tsdh % clk_period) - tsdh++; + tsdh = DIV_ROUND_UP(timing.tsdh, clk_period); if (tsdh > 1) data = tsdh - 1; diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 785aa674a4da..9bb0b056b25f 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -49,6 +49,8 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/of_dma.h> +#include <linux/of_gpio.h> +#include <linux/pinctrl/consumer.h> #include <linux/platform_data/i2c-imx.h> #include <linux/platform_device.h> #include <linux/sched.h> @@ -207,6 +209,11 @@ struct imx_i2c_struct { unsigned int cur_clk; unsigned int bitrate; const struct imx_i2c_hwdata *hwdata; + struct i2c_bus_recovery_info rinfo; + + struct pinctrl *pinctrl; + struct pinctrl_state *pinctrl_pins_default; + struct pinctrl_state *pinctrl_pins_gpio; struct imx_i2c_dma *dma; }; @@ -461,7 +468,7 @@ static int i2c_imx_acked(struct imx_i2c_struct *i2c_imx) { if (imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR) & I2SR_RXAK) { dev_dbg(&i2c_imx->adapter.dev, "<%s> No ACK\n", __func__); - return -EIO; /* No ACK */ + return -ENXIO; /* No ACK */ } dev_dbg(&i2c_imx->adapter.dev, "<%s> ACK received\n", __func__); @@ -896,6 +903,13 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter, /* Start I2C transfer */ result = i2c_imx_start(i2c_imx); + if (result) { + if (i2c_imx->adapter.bus_recovery_info) { + i2c_recover_bus(&i2c_imx->adapter); + result = i2c_imx_start(i2c_imx); + } + } + if (result) goto fail0; @@ -956,6 +970,55 @@ fail0: return (result < 0) ? result : num; } +static void i2c_imx_prepare_recovery(struct i2c_adapter *adap) +{ + struct imx_i2c_struct *i2c_imx; + + i2c_imx = container_of(adap, struct imx_i2c_struct, adapter); + + pinctrl_select_state(i2c_imx->pinctrl, i2c_imx->pinctrl_pins_gpio); +} + +static void i2c_imx_unprepare_recovery(struct i2c_adapter *adap) +{ + struct imx_i2c_struct *i2c_imx; + + i2c_imx = container_of(adap, struct imx_i2c_struct, adapter); + + pinctrl_select_state(i2c_imx->pinctrl, i2c_imx->pinctrl_pins_default); +} + +static void i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx, + struct platform_device *pdev) +{ + struct i2c_bus_recovery_info *rinfo = &i2c_imx->rinfo; + + i2c_imx->pinctrl_pins_default = pinctrl_lookup_state(i2c_imx->pinctrl, + PINCTRL_STATE_DEFAULT); + i2c_imx->pinctrl_pins_gpio = pinctrl_lookup_state(i2c_imx->pinctrl, + "gpio"); + rinfo->sda_gpio = of_get_named_gpio_flags(pdev->dev.of_node, + "sda-gpios", 0, NULL); + rinfo->scl_gpio = of_get_named_gpio_flags(pdev->dev.of_node, + "scl-gpios", 0, NULL); + + if (!gpio_is_valid(rinfo->sda_gpio) || + !gpio_is_valid(rinfo->scl_gpio) || + IS_ERR(i2c_imx->pinctrl_pins_default) || + IS_ERR(i2c_imx->pinctrl_pins_gpio)) { + dev_dbg(&pdev->dev, "recovery information incomplete\n"); + return; + } + + dev_dbg(&pdev->dev, "using scl-gpio %d and sda-gpio %d for recovery\n", + rinfo->sda_gpio, rinfo->scl_gpio); + + rinfo->prepare_recovery = i2c_imx_prepare_recovery; + rinfo->unprepare_recovery = i2c_imx_unprepare_recovery; + rinfo->recover_bus = i2c_generic_gpio_recovery; + i2c_imx->adapter.bus_recovery_info = rinfo; +} + static u32 i2c_imx_func(struct i2c_adapter *adapter) { return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL @@ -1023,6 +1086,13 @@ static int i2c_imx_probe(struct platform_device *pdev) dev_err(&pdev->dev, "can't enable I2C clock\n"); return ret; } + + i2c_imx->pinctrl = devm_pinctrl_get(&pdev->dev); + if (IS_ERR(i2c_imx->pinctrl)) { + ret = PTR_ERR(i2c_imx->pinctrl); + goto clk_disable; + } + /* Request IRQ */ ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, 0, pdev->name, i2c_imx); @@ -1056,6 +1126,8 @@ static int i2c_imx_probe(struct platform_device *pdev) goto clk_disable; } + i2c_imx_init_recovery_info(i2c_imx, pdev); + /* Set up platform driver data */ platform_set_drvdata(pdev, i2c_imx); clk_disable_unprepare(i2c_imx->clk); diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c index f994712d0904..7ba795b24e75 100644 --- a/drivers/i2c/busses/i2c-ismt.c +++ b/drivers/i2c/busses/i2c-ismt.c @@ -67,7 +67,7 @@ #include <linux/acpi.h> #include <linux/interrupt.h> -#include <asm-generic/io-64-nonatomic-lo-hi.h> +#include <linux/io-64-nonatomic-lo-hi.h> /* PCI Address Constants */ #define SMBBAR 0 @@ -165,14 +165,13 @@ struct ismt_desc { struct ismt_priv { struct i2c_adapter adapter; - void *smba; /* PCI BAR */ + void __iomem *smba; /* PCI BAR */ struct pci_dev *pci_dev; struct ismt_desc *hw; /* descriptor virt base addr */ dma_addr_t io_rng_dma; /* descriptor HW base addr */ u8 head; /* ring buffer head pointer */ struct completion cmp; /* interrupt completion */ u8 dma_buffer[I2C_SMBUS_BLOCK_MAX + 1]; /* temp R/W data buffer */ - bool using_msi; /* type of interrupt flag */ }; /** @@ -398,7 +397,7 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr, desc->tgtaddr_rw = ISMT_DESC_ADDR_RW(addr, read_write); /* Initialize common control bits */ - if (likely(priv->using_msi)) + if (likely(pci_dev_msi_enabled(priv->pci_dev))) desc->control = ISMT_DESC_INT | ISMT_DESC_FAIR; else desc->control = ISMT_DESC_FAIR; @@ -789,11 +788,8 @@ static int ismt_int_init(struct ismt_priv *priv) /* Try using MSI interrupts */ err = pci_enable_msi(priv->pci_dev); - if (err) { - dev_warn(&priv->pci_dev->dev, - "Unable to use MSI interrupts, falling back to legacy\n"); + if (err) goto intx; - } err = devm_request_irq(&priv->pci_dev->dev, priv->pci_dev->irq, @@ -806,11 +802,13 @@ static int ismt_int_init(struct ismt_priv *priv) goto intx; } - priv->using_msi = true; - goto done; + return 0; /* Try using legacy interrupts */ intx: + dev_warn(&priv->pci_dev->dev, + "Unable to use MSI interrupts, falling back to legacy\n"); + err = devm_request_irq(&priv->pci_dev->dev, priv->pci_dev->irq, ismt_do_interrupt, @@ -819,12 +817,9 @@ intx: priv); if (err) { dev_err(&priv->pci_dev->dev, "no usable interrupts\n"); - return -ENODEV; + return err; } - priv->using_msi = false; - -done: return 0; } @@ -847,17 +842,13 @@ ismt_probe(struct pci_dev *pdev, const struct pci_device_id *id) return -ENOMEM; pci_set_drvdata(pdev, priv); + i2c_set_adapdata(&priv->adapter, priv); priv->adapter.owner = THIS_MODULE; - priv->adapter.class = I2C_CLASS_HWMON; - priv->adapter.algo = &smbus_algorithm; - - /* set up the sysfs linkage to our parent device */ priv->adapter.dev.parent = &pdev->dev; - - /* number of retries on lost arbitration */ + ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&pdev->dev)); priv->adapter.retries = ISMT_MAX_RETRIES; priv->pci_dev = pdev; @@ -904,8 +895,7 @@ ismt_probe(struct pci_dev *pdev, const struct pci_device_id *id) priv->smba = pcim_iomap(pdev, SMBBAR, len); if (!priv->smba) { dev_err(&pdev->dev, "Unable to ioremap SMBus BAR\n"); - err = -ENODEV; - goto fail; + return -ENODEV; } if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) || @@ -915,32 +905,26 @@ ismt_probe(struct pci_dev *pdev, const struct pci_device_id *id) DMA_BIT_MASK(32)) != 0)) { dev_err(&pdev->dev, "pci_set_dma_mask fail %p\n", pdev); - err = -ENODEV; - goto fail; + return -ENODEV; } } err = ismt_dev_init(priv); if (err) - goto fail; + return err; ismt_hw_init(priv); err = ismt_int_init(priv); if (err) - goto fail; + return err; err = i2c_add_adapter(&priv->adapter); if (err) { dev_err(&pdev->dev, "Failed to add SMBus iSMT adapter\n"); - err = -ENODEV; - goto fail; + return -ENODEV; } return 0; - -fail: - pci_release_region(pdev, SMBBAR); - return err; } /** @@ -952,47 +936,13 @@ static void ismt_remove(struct pci_dev *pdev) struct ismt_priv *priv = pci_get_drvdata(pdev); i2c_del_adapter(&priv->adapter); - pci_release_region(pdev, SMBBAR); } -/** - * ismt_suspend() - place the device in suspend - * @pdev: PCI-Express device - * @mesg: PM message - */ -#ifdef CONFIG_PM -static int ismt_suspend(struct pci_dev *pdev, pm_message_t mesg) -{ - pci_save_state(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, mesg)); - return 0; -} - -/** - * ismt_resume() - PCI resume code - * @pdev: PCI-Express device - */ -static int ismt_resume(struct pci_dev *pdev) -{ - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - return pci_enable_device(pdev); -} - -#else - -#define ismt_suspend NULL -#define ismt_resume NULL - -#endif - static struct pci_driver ismt_driver = { .name = "ismt_smbus", .id_table = ismt_ids, .probe = ismt_probe, .remove = ismt_remove, - .suspend = ismt_suspend, - .resume = ismt_resume, }; module_pci_driver(ismt_driver); diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c index 5e176adca8e8..71d3929adf54 100644 --- a/drivers/i2c/busses/i2c-meson.c +++ b/drivers/i2c/busses/i2c-meson.c @@ -475,6 +475,7 @@ static const struct of_device_id meson_i2c_match[] = { { .compatible = "amlogic,meson6-i2c" }, { }, }; +MODULE_DEVICE_TABLE(of, meson_i2c_match); static struct platform_driver meson_i2c_driver = { .probe = meson_i2c_probe, diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c index c02e6c018c39..9b867169142f 100644 --- a/drivers/i2c/busses/i2c-mt65xx.c +++ b/drivers/i2c/busses/i2c-mt65xx.c @@ -728,11 +728,27 @@ static int mtk_i2c_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM_SLEEP +static int mtk_i2c_resume(struct device *dev) +{ + struct mtk_i2c *i2c = dev_get_drvdata(dev); + + mtk_i2c_init_hw(i2c); + + return 0; +} +#endif + +static const struct dev_pm_ops mtk_i2c_pm = { + SET_SYSTEM_SLEEP_PM_OPS(NULL, mtk_i2c_resume) +}; + static struct platform_driver mtk_i2c_driver = { .probe = mtk_i2c_probe, .remove = mtk_i2c_remove, .driver = { .name = I2C_DRV_NAME, + .pm = &mtk_i2c_pm, .of_match_table = of_match_ptr(mtk_i2c_of_match), }, }; diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 30059c1df2a3..5801227b97ab 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -669,8 +669,6 @@ mv64xxx_i2c_can_offload(struct mv64xxx_i2c_data *drv_data) struct i2c_msg *msgs = drv_data->msgs; int num = drv_data->num_msgs; - return false; - if (!drv_data->offload_enabled) return false; diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index abf5db7e441e..11b7b87311ed 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -92,6 +92,16 @@ static void oc_setreg_32(struct ocores_i2c *i2c, int reg, u8 value) iowrite32(value, i2c->base + (reg << i2c->reg_shift)); } +static void oc_setreg_16be(struct ocores_i2c *i2c, int reg, u8 value) +{ + iowrite16be(value, i2c->base + (reg << i2c->reg_shift)); +} + +static void oc_setreg_32be(struct ocores_i2c *i2c, int reg, u8 value) +{ + iowrite32be(value, i2c->base + (reg << i2c->reg_shift)); +} + static inline u8 oc_getreg_8(struct ocores_i2c *i2c, int reg) { return ioread8(i2c->base + (reg << i2c->reg_shift)); @@ -107,6 +117,16 @@ static inline u8 oc_getreg_32(struct ocores_i2c *i2c, int reg) return ioread32(i2c->base + (reg << i2c->reg_shift)); } +static inline u8 oc_getreg_16be(struct ocores_i2c *i2c, int reg) +{ + return ioread16be(i2c->base + (reg << i2c->reg_shift)); +} + +static inline u8 oc_getreg_32be(struct ocores_i2c *i2c, int reg) +{ + return ioread32be(i2c->base + (reg << i2c->reg_shift)); +} + static inline void oc_setreg(struct ocores_i2c *i2c, int reg, u8 value) { i2c->setreg(i2c, reg, value); @@ -428,6 +448,9 @@ static int ocores_i2c_probe(struct platform_device *pdev) i2c->reg_io_width = 1; /* Set to default value */ if (!i2c->setreg || !i2c->getreg) { + bool be = pdata ? pdata->big_endian : + of_device_is_big_endian(pdev->dev.of_node); + switch (i2c->reg_io_width) { case 1: i2c->setreg = oc_setreg_8; @@ -435,13 +458,13 @@ static int ocores_i2c_probe(struct platform_device *pdev) break; case 2: - i2c->setreg = oc_setreg_16; - i2c->getreg = oc_getreg_16; + i2c->setreg = be ? oc_setreg_16be : oc_setreg_16; + i2c->getreg = be ? oc_getreg_16be : oc_getreg_16; break; case 4: - i2c->setreg = oc_setreg_32; - i2c->getreg = oc_getreg_32; + i2c->setreg = be ? oc_setreg_32be : oc_setreg_32; + i2c->getreg = be ? oc_getreg_32be : oc_getreg_32; break; default: diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index e814a36d9b78..7ea67aa46fb7 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -496,7 +496,7 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) struct i2c_msg *pmsg; int rc = 0, completed = 0, i; struct i2c_pnx_algo_data *alg_data = adap->algo_data; - u32 stat = ioread32(I2C_REG_STS(alg_data)); + u32 stat; dev_dbg(&alg_data->adapter.dev, "%s(): entering: %d messages, stat = %04x.\n", @@ -600,7 +600,7 @@ static int i2c_pnx_controller_suspend(struct device *dev) { struct i2c_pnx_algo_data *alg_data = dev_get_drvdata(dev); - clk_disable(alg_data->clk); + clk_disable_unprepare(alg_data->clk); return 0; } @@ -609,7 +609,7 @@ static int i2c_pnx_controller_resume(struct device *dev) { struct i2c_pnx_algo_data *alg_data = dev_get_drvdata(dev); - return clk_enable(alg_data->clk); + return clk_prepare_enable(alg_data->clk); } static SIMPLE_DEV_PM_OPS(i2c_pnx_pm, @@ -659,9 +659,8 @@ static int i2c_pnx_probe(struct platform_device *pdev) if (IS_ERR(alg_data->clk)) return PTR_ERR(alg_data->clk); - init_timer(&alg_data->mif.timer); - alg_data->mif.timer.function = i2c_pnx_timeout; - alg_data->mif.timer.data = (unsigned long)alg_data; + setup_timer(&alg_data->mif.timer, i2c_pnx_timeout, + (unsigned long)alg_data); snprintf(alg_data->adapter.name, sizeof(alg_data->adapter.name), "%s", pdev->name); @@ -672,7 +671,7 @@ static int i2c_pnx_probe(struct platform_device *pdev) if (IS_ERR(alg_data->ioaddr)) return PTR_ERR(alg_data->ioaddr); - ret = clk_enable(alg_data->clk); + ret = clk_prepare_enable(alg_data->clk); if (ret) return ret; @@ -726,7 +725,7 @@ static int i2c_pnx_probe(struct platform_device *pdev) return 0; out_clock: - clk_disable(alg_data->clk); + clk_disable_unprepare(alg_data->clk); return ret; } @@ -735,7 +734,7 @@ static int i2c_pnx_remove(struct platform_device *pdev) struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev); i2c_del_adapter(&alg_data->adapter); - clk_disable(alg_data->clk); + clk_disable_unprepare(alg_data->clk); return 0; } diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 645e4b79d968..0d351954db02 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -46,12 +46,15 @@ struct pxa_reg_layout { u32 icr; u32 isr; u32 isar; + u32 ilcr; + u32 iwcr; }; enum pxa_i2c_types { REGS_PXA2XX, REGS_PXA3XX, REGS_CE4100, + REGS_PXA910, }; /* @@ -79,12 +82,22 @@ static struct pxa_reg_layout pxa_reg_layout[] = { .isr = 0x04, /* no isar register */ }, + [REGS_PXA910] = { + .ibmr = 0x00, + .idbr = 0x08, + .icr = 0x10, + .isr = 0x18, + .isar = 0x20, + .ilcr = 0x28, + .iwcr = 0x30, + }, }; static const struct platform_device_id i2c_pxa_id_table[] = { { "pxa2xx-i2c", REGS_PXA2XX }, { "pxa3xx-pwri2c", REGS_PXA3XX }, { "ce4100-i2c", REGS_CE4100 }, + { "pxa910-i2c", REGS_PXA910 }, { }, }; MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table); @@ -124,6 +137,23 @@ MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table); #define ISR_SAD (1 << 9) /* slave address detected */ #define ISR_BED (1 << 10) /* bus error no ACK/NAK */ +/* bit field shift & mask */ +#define ILCR_SLV_SHIFT 0 +#define ILCR_SLV_MASK (0x1FF << ILCR_SLV_SHIFT) +#define ILCR_FLV_SHIFT 9 +#define ILCR_FLV_MASK (0x1FF << ILCR_FLV_SHIFT) +#define ILCR_HLVL_SHIFT 18 +#define ILCR_HLVL_MASK (0x1FF << ILCR_HLVL_SHIFT) +#define ILCR_HLVH_SHIFT 27 +#define ILCR_HLVH_MASK (0x1F << ILCR_HLVH_SHIFT) + +#define IWCR_CNT_SHIFT 0 +#define IWCR_CNT_MASK (0x1F << IWCR_CNT_SHIFT) +#define IWCR_HS_CNT1_SHIFT 5 +#define IWCR_HS_CNT1_MASK (0x1F << IWCR_HS_CNT1_SHIFT) +#define IWCR_HS_CNT2_SHIFT 10 +#define IWCR_HS_CNT2_MASK (0x1F << IWCR_HS_CNT2_SHIFT) + struct pxa_i2c { spinlock_t lock; wait_queue_head_t wait; @@ -150,6 +180,8 @@ struct pxa_i2c { void __iomem *reg_icr; void __iomem *reg_isr; void __iomem *reg_isar; + void __iomem *reg_ilcr; + void __iomem *reg_iwcr; unsigned long iobase; unsigned long iosize; @@ -168,6 +200,8 @@ struct pxa_i2c { #define _ICR(i2c) ((i2c)->reg_icr) #define _ISR(i2c) ((i2c)->reg_isr) #define _ISAR(i2c) ((i2c)->reg_isar) +#define _ILCR(i2c) ((i2c)->reg_ilcr) +#define _IWCR(i2c) ((i2c)->reg_iwcr) /* * I2C Slave mode address @@ -1102,7 +1136,7 @@ static const struct i2c_algorithm i2c_pxa_pio_algorithm = { static const struct of_device_id i2c_pxa_dt_ids[] = { { .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX }, { .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX }, - { .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA2XX }, + { .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA910 }, {} }; MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids); @@ -1203,6 +1237,11 @@ static int i2c_pxa_probe(struct platform_device *dev) if (i2c_type != REGS_CE4100) i2c->reg_isar = i2c->reg_base + pxa_reg_layout[i2c_type].isar; + if (i2c_type == REGS_PXA910) { + i2c->reg_ilcr = i2c->reg_base + pxa_reg_layout[i2c_type].ilcr; + i2c->reg_iwcr = i2c->reg_base + pxa_reg_layout[i2c_type].iwcr; + } + i2c->iobase = res->start; i2c->iosize = resource_size(res); diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index d8b5a8fee1e6..b0ae560b38c3 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -27,7 +27,6 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/i2c.h> -#include <linux/i2c/i2c-rcar.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of_device.h> @@ -103,6 +102,7 @@ enum rcar_i2c_type { I2C_RCAR_GEN1, I2C_RCAR_GEN2, + I2C_RCAR_GEN3, }; struct rcar_i2c_priv { @@ -178,6 +178,7 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, cdf_width = 2; break; case I2C_RCAR_GEN2: + case I2C_RCAR_GEN3: cdf_width = 3; break; default: @@ -625,13 +626,13 @@ static const struct of_device_id rcar_i2c_dt_ids[] = { { .compatible = "renesas,i2c-r8a7792", .data = (void *)I2C_RCAR_GEN2 }, { .compatible = "renesas,i2c-r8a7793", .data = (void *)I2C_RCAR_GEN2 }, { .compatible = "renesas,i2c-r8a7794", .data = (void *)I2C_RCAR_GEN2 }, + { .compatible = "renesas,i2c-r8a7795", .data = (void *)I2C_RCAR_GEN3 }, {}, }; MODULE_DEVICE_TABLE(of, rcar_i2c_dt_ids); static int rcar_i2c_probe(struct platform_device *pdev) { - struct i2c_rcar_platform_data *pdata = dev_get_platdata(&pdev->dev); struct rcar_i2c_priv *priv; struct i2c_adapter *adap; struct resource *res; @@ -650,15 +651,9 @@ static int rcar_i2c_probe(struct platform_device *pdev) } bus_speed = 100000; /* default 100 kHz */ - ret = of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed); - if (ret < 0 && pdata && pdata->bus_speed) - bus_speed = pdata->bus_speed; + of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed); - if (pdev->dev.of_node) - priv->devtype = (long)of_match_device(rcar_i2c_dt_ids, - dev)->data; - else - priv->devtype = platform_get_device_id(pdev)->driver_data; + priv->devtype = (enum rcar_i2c_type)of_match_device(rcar_i2c_dt_ids, dev)->data; ret = rcar_i2c_clock_calculate(priv, bus_speed, dev); if (ret < 0) @@ -716,14 +711,6 @@ static int rcar_i2c_remove(struct platform_device *pdev) return 0; } -static const struct platform_device_id rcar_i2c_id_table[] = { - { "i2c-rcar", I2C_RCAR_GEN1 }, - { "i2c-rcar_gen1", I2C_RCAR_GEN1 }, - { "i2c-rcar_gen2", I2C_RCAR_GEN2 }, - {}, -}; -MODULE_DEVICE_TABLE(platform, rcar_i2c_id_table); - static struct platform_driver rcar_i2c_driver = { .driver = { .name = "i2c-rcar", @@ -731,7 +718,6 @@ static struct platform_driver rcar_i2c_driver = { }, .probe = rcar_i2c_probe, .remove = rcar_i2c_remove, - .id_table = rcar_i2c_id_table, }; module_platform_driver(rcar_i2c_driver); diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index 72e97e306bd9..c1935ebd6a9c 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -858,6 +858,7 @@ static const struct of_device_id rk3x_i2c_match[] = { { .compatible = "rockchip,rk3288-i2c", .data = (void *)&soc_data[2] }, {}, }; +MODULE_DEVICE_TABLE(of, rk3x_i2c_match); static int rk3x_i2c_probe(struct platform_device *pdev) { diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 47659a925e09..7d2bd3ec2d2d 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -836,6 +836,7 @@ static const struct of_device_id sh_mobile_i2c_dt_ids[] = { { .compatible = "renesas,iic-r8a7792", .data = &fast_clock_dt_config }, { .compatible = "renesas,iic-r8a7793", .data = &fast_clock_dt_config }, { .compatible = "renesas,iic-r8a7794", .data = &fast_clock_dt_config }, + { .compatible = "renesas,iic-r8a7795", .data = &fast_clock_dt_config }, { .compatible = "renesas,iic-sh73a0", .data = &fast_clock_dt_config }, {}, }; diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c index 1092d4eeeb54..13e51ef6af73 100644 --- a/drivers/i2c/busses/i2c-sirf.c +++ b/drivers/i2c/busses/i2c-sirf.c @@ -358,11 +358,29 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev) if (err < 0) bitrate = SIRFSOC_I2C_DEFAULT_SPEED; - if (bitrate < 100000) - regval = - (2 * ctrl_speed) / (bitrate * 11); - else + /* + * Due to some hardware design issues, we need to tune the formula. + * Since i2c is open drain interface that allows the slave to + * stall the transaction by holding the SCL line at '0', the RTL + * implementation is waiting for SCL feedback from the pin after + * setting it to High-Z ('1'). This wait adds to the high-time + * interval counter few cycles of the input synchronization + * (depending on the SCL_FILTER_REG field), and also the time it + * takes for the board pull-up resistor to rise the SCL line. + * For slow SCL settings these additions are negligible, + * but they start to affect the speed when clock is set to faster + * frequencies. + * Through the actual tests, use the different user_div value(which + * in the divider formular 'Fio / (Fi2c * user_div)') to adapt + * the different ranges of i2c bus clock frequency, to make the SCL + * more accurate. + */ + if (bitrate <= 30000) regval = ctrl_speed / (bitrate * 5); + else if (bitrate > 30000 && bitrate <= 280000) + regval = (2 * ctrl_speed) / (bitrate * 11); + else + regval = ctrl_speed / (bitrate * 6); writel(regval, siic->base + SIRFSOC_I2C_CLK_CTRL); if (regval > 0xFF) diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c index 4885da9e9298..460c134832ac 100644 --- a/drivers/i2c/busses/i2c-stu300.c +++ b/drivers/i2c/busses/i2c-stu300.c @@ -977,6 +977,7 @@ static const struct of_device_id stu300_dt_match[] = { { .compatible = "st,ddci2c" }, {}, }; +MODULE_DEVICE_TABLE(of, stu300_dt_match); static struct platform_driver stu300_i2c_driver = { .driver = { diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index b7e1a3655421..a0522fcc4ff8 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -873,7 +873,6 @@ static int tegra_i2c_probe(struct platform_device *pdev) i2c_dev->adapter.class = I2C_CLASS_DEPRECATED; strlcpy(i2c_dev->adapter.name, "Tegra I2C adapter", sizeof(i2c_dev->adapter.name)); - i2c_dev->adapter.algo = &tegra_i2c_algo; i2c_dev->adapter.dev.parent = &pdev->dev; i2c_dev->adapter.nr = pdev->id; i2c_dev->adapter.dev.of_node = pdev->dev.of_node; diff --git a/drivers/i2c/busses/i2c-uniphier-f.c b/drivers/i2c/busses/i2c-uniphier-f.c new file mode 100644 index 000000000000..e8d03bcfe3e0 --- /dev/null +++ b/drivers/i2c/busses/i2c-uniphier-f.c @@ -0,0 +1,584 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#define UNIPHIER_FI2C_CR 0x00 /* control register */ +#define UNIPHIER_FI2C_CR_MST BIT(3) /* master mode */ +#define UNIPHIER_FI2C_CR_STA BIT(2) /* start condition */ +#define UNIPHIER_FI2C_CR_STO BIT(1) /* stop condition */ +#define UNIPHIER_FI2C_CR_NACK BIT(0) /* do not return ACK */ +#define UNIPHIER_FI2C_DTTX 0x04 /* TX FIFO */ +#define UNIPHIER_FI2C_DTTX_CMD BIT(8) /* send command (slave addr) */ +#define UNIPHIER_FI2C_DTTX_RD BIT(0) /* read transaction */ +#define UNIPHIER_FI2C_DTRX 0x04 /* RX FIFO */ +#define UNIPHIER_FI2C_SLAD 0x0c /* slave address */ +#define UNIPHIER_FI2C_CYC 0x10 /* clock cycle control */ +#define UNIPHIER_FI2C_LCTL 0x14 /* clock low period control */ +#define UNIPHIER_FI2C_SSUT 0x18 /* restart/stop setup time control */ +#define UNIPHIER_FI2C_DSUT 0x1c /* data setup time control */ +#define UNIPHIER_FI2C_INT 0x20 /* interrupt status */ +#define UNIPHIER_FI2C_IE 0x24 /* interrupt enable */ +#define UNIPHIER_FI2C_IC 0x28 /* interrupt clear */ +#define UNIPHIER_FI2C_INT_TE BIT(9) /* TX FIFO empty */ +#define UNIPHIER_FI2C_INT_RF BIT(8) /* RX FIFO full */ +#define UNIPHIER_FI2C_INT_TC BIT(7) /* send complete (STOP) */ +#define UNIPHIER_FI2C_INT_RC BIT(6) /* receive complete (STOP) */ +#define UNIPHIER_FI2C_INT_TB BIT(5) /* sent specified bytes */ +#define UNIPHIER_FI2C_INT_RB BIT(4) /* received specified bytes */ +#define UNIPHIER_FI2C_INT_NA BIT(2) /* no ACK */ +#define UNIPHIER_FI2C_INT_AL BIT(1) /* arbitration lost */ +#define UNIPHIER_FI2C_SR 0x2c /* status register */ +#define UNIPHIER_FI2C_SR_DB BIT(12) /* device busy */ +#define UNIPHIER_FI2C_SR_STS BIT(11) /* stop condition detected */ +#define UNIPHIER_FI2C_SR_BB BIT(8) /* bus busy */ +#define UNIPHIER_FI2C_SR_RFF BIT(3) /* RX FIFO full */ +#define UNIPHIER_FI2C_SR_RNE BIT(2) /* RX FIFO not empty */ +#define UNIPHIER_FI2C_SR_TNF BIT(1) /* TX FIFO not full */ +#define UNIPHIER_FI2C_SR_TFE BIT(0) /* TX FIFO empty */ +#define UNIPHIER_FI2C_RST 0x34 /* reset control */ +#define UNIPHIER_FI2C_RST_TBRST BIT(2) /* clear TX FIFO */ +#define UNIPHIER_FI2C_RST_RBRST BIT(1) /* clear RX FIFO */ +#define UNIPHIER_FI2C_RST_RST BIT(0) /* forcible bus reset */ +#define UNIPHIER_FI2C_BM 0x38 /* bus monitor */ +#define UNIPHIER_FI2C_BM_SDAO BIT(3) /* output for SDA line */ +#define UNIPHIER_FI2C_BM_SDAS BIT(2) /* readback of SDA line */ +#define UNIPHIER_FI2C_BM_SCLO BIT(1) /* output for SCL line */ +#define UNIPHIER_FI2C_BM_SCLS BIT(0) /* readback of SCL line */ +#define UNIPHIER_FI2C_NOISE 0x3c /* noise filter control */ +#define UNIPHIER_FI2C_TBC 0x40 /* TX byte count setting */ +#define UNIPHIER_FI2C_RBC 0x44 /* RX byte count setting */ +#define UNIPHIER_FI2C_TBCM 0x48 /* TX byte count monitor */ +#define UNIPHIER_FI2C_RBCM 0x4c /* RX byte count monitor */ +#define UNIPHIER_FI2C_BRST 0x50 /* bus reset */ +#define UNIPHIER_FI2C_BRST_FOEN BIT(1) /* normal operation */ +#define UNIPHIER_FI2C_BRST_RSCL BIT(0) /* release SCL */ + +#define UNIPHIER_FI2C_INT_FAULTS \ + (UNIPHIER_FI2C_INT_NA | UNIPHIER_FI2C_INT_AL) +#define UNIPHIER_FI2C_INT_STOP \ + (UNIPHIER_FI2C_INT_TC | UNIPHIER_FI2C_INT_RC) + +#define UNIPHIER_FI2C_RD BIT(0) +#define UNIPHIER_FI2C_STOP BIT(1) +#define UNIPHIER_FI2C_MANUAL_NACK BIT(2) +#define UNIPHIER_FI2C_BYTE_WISE BIT(3) +#define UNIPHIER_FI2C_DEFER_STOP_COMP BIT(4) + +#define UNIPHIER_FI2C_DEFAULT_SPEED 100000 +#define UNIPHIER_FI2C_MAX_SPEED 400000 +#define UNIPHIER_FI2C_FIFO_SIZE 8 + +struct uniphier_fi2c_priv { + struct completion comp; + struct i2c_adapter adap; + void __iomem *membase; + struct clk *clk; + unsigned int len; + u8 *buf; + u32 enabled_irqs; + int error; + unsigned int flags; + unsigned int busy_cnt; +}; + +static void uniphier_fi2c_fill_txfifo(struct uniphier_fi2c_priv *priv, + bool first) +{ + int fifo_space = UNIPHIER_FI2C_FIFO_SIZE; + + /* + * TX-FIFO stores slave address in it for the first access. + * Decrement the counter. + */ + if (first) + fifo_space--; + + while (priv->len) { + if (fifo_space-- <= 0) + break; + + dev_dbg(&priv->adap.dev, "write data: %02x\n", *priv->buf); + writel(*priv->buf++, priv->membase + UNIPHIER_FI2C_DTTX); + priv->len--; + } +} + +static void uniphier_fi2c_drain_rxfifo(struct uniphier_fi2c_priv *priv) +{ + int fifo_left = priv->flags & UNIPHIER_FI2C_BYTE_WISE ? + 1 : UNIPHIER_FI2C_FIFO_SIZE; + + while (priv->len) { + if (fifo_left-- <= 0) + break; + + *priv->buf++ = readl(priv->membase + UNIPHIER_FI2C_DTRX); + dev_dbg(&priv->adap.dev, "read data: %02x\n", priv->buf[-1]); + priv->len--; + } +} + +static void uniphier_fi2c_set_irqs(struct uniphier_fi2c_priv *priv) +{ + writel(priv->enabled_irqs, priv->membase + UNIPHIER_FI2C_IE); +} + +static void uniphier_fi2c_clear_irqs(struct uniphier_fi2c_priv *priv) +{ + writel(-1, priv->membase + UNIPHIER_FI2C_IC); +} + +static void uniphier_fi2c_stop(struct uniphier_fi2c_priv *priv) +{ + dev_dbg(&priv->adap.dev, "stop condition\n"); + + priv->enabled_irqs |= UNIPHIER_FI2C_INT_STOP; + uniphier_fi2c_set_irqs(priv); + writel(UNIPHIER_FI2C_CR_MST | UNIPHIER_FI2C_CR_STO, + priv->membase + UNIPHIER_FI2C_CR); +} + +static irqreturn_t uniphier_fi2c_interrupt(int irq, void *dev_id) +{ + struct uniphier_fi2c_priv *priv = dev_id; + u32 irq_status; + + irq_status = readl(priv->membase + UNIPHIER_FI2C_INT); + + dev_dbg(&priv->adap.dev, + "interrupt: enabled_irqs=%04x, irq_status=%04x\n", + priv->enabled_irqs, irq_status); + + if (irq_status & UNIPHIER_FI2C_INT_STOP) + goto complete; + + if (unlikely(irq_status & UNIPHIER_FI2C_INT_AL)) { + dev_dbg(&priv->adap.dev, "arbitration lost\n"); + priv->error = -EAGAIN; + goto complete; + } + + if (unlikely(irq_status & UNIPHIER_FI2C_INT_NA)) { + dev_dbg(&priv->adap.dev, "could not get ACK\n"); + priv->error = -ENXIO; + if (priv->flags & UNIPHIER_FI2C_RD) { + /* + * work around a hardware bug: + * The receive-completed interrupt is never set even if + * STOP condition is detected after the address phase + * of read transaction fails to get ACK. + * To avoid time-out error, we issue STOP here, + * but do not wait for its completion. + * It should be checked after exiting this handler. + */ + uniphier_fi2c_stop(priv); + priv->flags |= UNIPHIER_FI2C_DEFER_STOP_COMP; + goto complete; + } + goto stop; + } + + if (irq_status & UNIPHIER_FI2C_INT_TE) { + if (!priv->len) + goto data_done; + + uniphier_fi2c_fill_txfifo(priv, false); + goto handled; + } + + if (irq_status & (UNIPHIER_FI2C_INT_RF | UNIPHIER_FI2C_INT_RB)) { + uniphier_fi2c_drain_rxfifo(priv); + if (!priv->len) + goto data_done; + + if (unlikely(priv->flags & UNIPHIER_FI2C_MANUAL_NACK)) { + if (priv->len <= UNIPHIER_FI2C_FIFO_SIZE && + !(priv->flags & UNIPHIER_FI2C_BYTE_WISE)) { + dev_dbg(&priv->adap.dev, + "enable read byte count IRQ\n"); + priv->enabled_irqs |= UNIPHIER_FI2C_INT_RB; + uniphier_fi2c_set_irqs(priv); + priv->flags |= UNIPHIER_FI2C_BYTE_WISE; + } + if (priv->len <= 1) { + dev_dbg(&priv->adap.dev, "set NACK\n"); + writel(UNIPHIER_FI2C_CR_MST | + UNIPHIER_FI2C_CR_NACK, + priv->membase + UNIPHIER_FI2C_CR); + } + } + + goto handled; + } + + return IRQ_NONE; + +data_done: + if (priv->flags & UNIPHIER_FI2C_STOP) { +stop: + uniphier_fi2c_stop(priv); + } else { +complete: + priv->enabled_irqs = 0; + uniphier_fi2c_set_irqs(priv); + complete(&priv->comp); + } + +handled: + uniphier_fi2c_clear_irqs(priv); + + return IRQ_HANDLED; +} + +static void uniphier_fi2c_tx_init(struct uniphier_fi2c_priv *priv, u16 addr) +{ + priv->enabled_irqs |= UNIPHIER_FI2C_INT_TE; + /* do not use TX byte counter */ + writel(0, priv->membase + UNIPHIER_FI2C_TBC); + /* set slave address */ + writel(UNIPHIER_FI2C_DTTX_CMD | addr << 1, + priv->membase + UNIPHIER_FI2C_DTTX); + /* first chunk of data */ + uniphier_fi2c_fill_txfifo(priv, true); +} + +static void uniphier_fi2c_rx_init(struct uniphier_fi2c_priv *priv, u16 addr) +{ + priv->flags |= UNIPHIER_FI2C_RD; + + if (likely(priv->len < 256)) { + /* + * If possible, use RX byte counter. + * It can automatically handle NACK for the last byte. + */ + writel(priv->len, priv->membase + UNIPHIER_FI2C_RBC); + priv->enabled_irqs |= UNIPHIER_FI2C_INT_RF | + UNIPHIER_FI2C_INT_RB; + } else { + /* + * The byte counter can not count over 256. In this case, + * do not use it at all. Drain data when FIFO gets full, + * but treat the last portion as a special case. + */ + writel(0, priv->membase + UNIPHIER_FI2C_RBC); + priv->flags |= UNIPHIER_FI2C_MANUAL_NACK; + priv->enabled_irqs |= UNIPHIER_FI2C_INT_RF; + } + + /* set slave address with RD bit */ + writel(UNIPHIER_FI2C_DTTX_CMD | UNIPHIER_FI2C_DTTX_RD | addr << 1, + priv->membase + UNIPHIER_FI2C_DTTX); +} + +static void uniphier_fi2c_reset(struct uniphier_fi2c_priv *priv) +{ + writel(UNIPHIER_FI2C_RST_RST, priv->membase + UNIPHIER_FI2C_RST); +} + +static void uniphier_fi2c_prepare_operation(struct uniphier_fi2c_priv *priv) +{ + writel(UNIPHIER_FI2C_BRST_FOEN | UNIPHIER_FI2C_BRST_RSCL, + priv->membase + UNIPHIER_FI2C_BRST); +} + +static void uniphier_fi2c_recover(struct uniphier_fi2c_priv *priv) +{ + uniphier_fi2c_reset(priv); + i2c_recover_bus(&priv->adap); +} + +static int uniphier_fi2c_master_xfer_one(struct i2c_adapter *adap, + struct i2c_msg *msg, bool stop) +{ + struct uniphier_fi2c_priv *priv = i2c_get_adapdata(adap); + bool is_read = msg->flags & I2C_M_RD; + unsigned long time_left; + + dev_dbg(&adap->dev, "%s: addr=0x%02x, len=%d, stop=%d\n", + is_read ? "receive" : "transmit", msg->addr, msg->len, stop); + + priv->len = msg->len; + priv->buf = msg->buf; + priv->enabled_irqs = UNIPHIER_FI2C_INT_FAULTS; + priv->error = 0; + priv->flags = 0; + + if (stop) + priv->flags |= UNIPHIER_FI2C_STOP; + + reinit_completion(&priv->comp); + uniphier_fi2c_clear_irqs(priv); + writel(UNIPHIER_FI2C_RST_TBRST | UNIPHIER_FI2C_RST_RBRST, + priv->membase + UNIPHIER_FI2C_RST); /* reset TX/RX FIFO */ + + if (is_read) + uniphier_fi2c_rx_init(priv, msg->addr); + else + uniphier_fi2c_tx_init(priv, msg->addr); + + uniphier_fi2c_set_irqs(priv); + + dev_dbg(&adap->dev, "start condition\n"); + writel(UNIPHIER_FI2C_CR_MST | UNIPHIER_FI2C_CR_STA, + priv->membase + UNIPHIER_FI2C_CR); + + time_left = wait_for_completion_timeout(&priv->comp, adap->timeout); + if (!time_left) { + dev_err(&adap->dev, "transaction timeout.\n"); + uniphier_fi2c_recover(priv); + return -ETIMEDOUT; + } + dev_dbg(&adap->dev, "complete\n"); + + if (unlikely(priv->flags & UNIPHIER_FI2C_DEFER_STOP_COMP)) { + u32 status = readl(priv->membase + UNIPHIER_FI2C_SR); + + if (!(status & UNIPHIER_FI2C_SR_STS) || + status & UNIPHIER_FI2C_SR_BB) { + dev_err(&adap->dev, + "stop condition was not completed.\n"); + uniphier_fi2c_recover(priv); + return -EBUSY; + } + } + + return priv->error; +} + +static int uniphier_fi2c_check_bus_busy(struct i2c_adapter *adap) +{ + struct uniphier_fi2c_priv *priv = i2c_get_adapdata(adap); + + if (readl(priv->membase + UNIPHIER_FI2C_SR) & UNIPHIER_FI2C_SR_DB) { + if (priv->busy_cnt++ > 3) { + /* + * If bus busy continues too long, it is probably + * in a wrong state. Try bus recovery. + */ + uniphier_fi2c_recover(priv); + priv->busy_cnt = 0; + } + + return -EAGAIN; + } + + priv->busy_cnt = 0; + return 0; +} + +static int uniphier_fi2c_master_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + struct i2c_msg *msg, *emsg = msgs + num; + int ret; + + ret = uniphier_fi2c_check_bus_busy(adap); + if (ret) + return ret; + + for (msg = msgs; msg < emsg; msg++) { + /* If next message is read, skip the stop condition */ + bool stop = !(msg + 1 < emsg && msg[1].flags & I2C_M_RD); + /* but, force it if I2C_M_STOP is set */ + if (msg->flags & I2C_M_STOP) + stop = true; + + ret = uniphier_fi2c_master_xfer_one(adap, msg, stop); + if (ret) + return ret; + } + + return num; +} + +static u32 uniphier_fi2c_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static const struct i2c_algorithm uniphier_fi2c_algo = { + .master_xfer = uniphier_fi2c_master_xfer, + .functionality = uniphier_fi2c_functionality, +}; + +static int uniphier_fi2c_get_scl(struct i2c_adapter *adap) +{ + struct uniphier_fi2c_priv *priv = i2c_get_adapdata(adap); + + return !!(readl(priv->membase + UNIPHIER_FI2C_BM) & + UNIPHIER_FI2C_BM_SCLS); +} + +static void uniphier_fi2c_set_scl(struct i2c_adapter *adap, int val) +{ + struct uniphier_fi2c_priv *priv = i2c_get_adapdata(adap); + + writel(val ? UNIPHIER_FI2C_BRST_RSCL : 0, + priv->membase + UNIPHIER_FI2C_BRST); +} + +static int uniphier_fi2c_get_sda(struct i2c_adapter *adap) +{ + struct uniphier_fi2c_priv *priv = i2c_get_adapdata(adap); + + return !!(readl(priv->membase + UNIPHIER_FI2C_BM) & + UNIPHIER_FI2C_BM_SDAS); +} + +static void uniphier_fi2c_unprepare_recovery(struct i2c_adapter *adap) +{ + uniphier_fi2c_prepare_operation(i2c_get_adapdata(adap)); +} + +static struct i2c_bus_recovery_info uniphier_fi2c_bus_recovery_info = { + .recover_bus = i2c_generic_scl_recovery, + .get_scl = uniphier_fi2c_get_scl, + .set_scl = uniphier_fi2c_set_scl, + .get_sda = uniphier_fi2c_get_sda, + .unprepare_recovery = uniphier_fi2c_unprepare_recovery, +}; + +static int uniphier_fi2c_clk_init(struct device *dev, + struct uniphier_fi2c_priv *priv) +{ + struct device_node *np = dev->of_node; + unsigned long clk_rate; + u32 bus_speed, clk_count; + int ret; + + if (of_property_read_u32(np, "clock-frequency", &bus_speed)) + bus_speed = UNIPHIER_FI2C_DEFAULT_SPEED; + + if (bus_speed > UNIPHIER_FI2C_MAX_SPEED) + bus_speed = UNIPHIER_FI2C_MAX_SPEED; + + /* Get input clk rate through clk driver */ + priv->clk = devm_clk_get(dev, NULL); + if (IS_ERR(priv->clk)) { + dev_err(dev, "failed to get clock\n"); + return PTR_ERR(priv->clk); + } + + ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; + + clk_rate = clk_get_rate(priv->clk); + + uniphier_fi2c_reset(priv); + + clk_count = clk_rate / bus_speed; + + writel(clk_count, priv->membase + UNIPHIER_FI2C_CYC); + writel(clk_count / 2, priv->membase + UNIPHIER_FI2C_LCTL); + writel(clk_count / 2, priv->membase + UNIPHIER_FI2C_SSUT); + writel(clk_count / 16, priv->membase + UNIPHIER_FI2C_DSUT); + + uniphier_fi2c_prepare_operation(priv); + + return 0; +} + +static int uniphier_fi2c_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct uniphier_fi2c_priv *priv; + struct resource *regs; + int irq; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->membase = devm_ioremap_resource(dev, regs); + if (IS_ERR(priv->membase)) + return PTR_ERR(priv->membase); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(dev, "failed to get IRQ number"); + return irq; + } + + init_completion(&priv->comp); + priv->adap.owner = THIS_MODULE; + priv->adap.algo = &uniphier_fi2c_algo; + priv->adap.dev.parent = dev; + priv->adap.dev.of_node = dev->of_node; + strlcpy(priv->adap.name, "UniPhier FI2C", sizeof(priv->adap.name)); + priv->adap.bus_recovery_info = &uniphier_fi2c_bus_recovery_info; + i2c_set_adapdata(&priv->adap, priv); + platform_set_drvdata(pdev, priv); + + ret = uniphier_fi2c_clk_init(dev, priv); + if (ret) + return ret; + + ret = devm_request_irq(dev, irq, uniphier_fi2c_interrupt, 0, + pdev->name, priv); + if (ret) { + dev_err(dev, "failed to request irq %d\n", irq); + goto err; + } + + ret = i2c_add_adapter(&priv->adap); + if (ret) { + dev_err(dev, "failed to add I2C adapter\n"); + goto err; + } + +err: + if (ret) + clk_disable_unprepare(priv->clk); + + return ret; +} + +static int uniphier_fi2c_remove(struct platform_device *pdev) +{ + struct uniphier_fi2c_priv *priv = platform_get_drvdata(pdev); + + i2c_del_adapter(&priv->adap); + clk_disable_unprepare(priv->clk); + + return 0; +} + +static const struct of_device_id uniphier_fi2c_match[] = { + { .compatible = "socionext,uniphier-fi2c" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, uniphier_fi2c_match); + +static struct platform_driver uniphier_fi2c_drv = { + .probe = uniphier_fi2c_probe, + .remove = uniphier_fi2c_remove, + .driver = { + .name = "uniphier-fi2c", + .of_match_table = uniphier_fi2c_match, + }, +}; +module_platform_driver(uniphier_fi2c_drv); + +MODULE_AUTHOR("Masahiro Yamada <yamada.masahiro@socionext.com>"); +MODULE_DESCRIPTION("UniPhier FIFO-builtin I2C bus driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-uniphier.c b/drivers/i2c/busses/i2c-uniphier.c new file mode 100644 index 000000000000..e3c3861c3325 --- /dev/null +++ b/drivers/i2c/busses/i2c-uniphier.c @@ -0,0 +1,441 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#define UNIPHIER_I2C_DTRM 0x00 /* TX register */ +#define UNIPHIER_I2C_DTRM_IRQEN BIT(11) /* enable interrupt */ +#define UNIPHIER_I2C_DTRM_STA BIT(10) /* start condition */ +#define UNIPHIER_I2C_DTRM_STO BIT(9) /* stop condition */ +#define UNIPHIER_I2C_DTRM_NACK BIT(8) /* do not return ACK */ +#define UNIPHIER_I2C_DTRM_RD BIT(0) /* read transaction */ +#define UNIPHIER_I2C_DREC 0x04 /* RX register */ +#define UNIPHIER_I2C_DREC_MST BIT(14) /* 1 = master, 0 = slave */ +#define UNIPHIER_I2C_DREC_TX BIT(13) /* 1 = transmit, 0 = receive */ +#define UNIPHIER_I2C_DREC_STS BIT(12) /* stop condition detected */ +#define UNIPHIER_I2C_DREC_LRB BIT(11) /* no ACK */ +#define UNIPHIER_I2C_DREC_LAB BIT(9) /* arbitration lost */ +#define UNIPHIER_I2C_DREC_BBN BIT(8) /* bus not busy */ +#define UNIPHIER_I2C_MYAD 0x08 /* slave address */ +#define UNIPHIER_I2C_CLK 0x0c /* clock frequency control */ +#define UNIPHIER_I2C_BRST 0x10 /* bus reset */ +#define UNIPHIER_I2C_BRST_FOEN BIT(1) /* normal operation */ +#define UNIPHIER_I2C_BRST_RSCL BIT(0) /* release SCL */ +#define UNIPHIER_I2C_HOLD 0x14 /* hold time control */ +#define UNIPHIER_I2C_BSTS 0x18 /* bus status monitor */ +#define UNIPHIER_I2C_BSTS_SDA BIT(1) /* readback of SDA line */ +#define UNIPHIER_I2C_BSTS_SCL BIT(0) /* readback of SCL line */ +#define UNIPHIER_I2C_NOISE 0x1c /* noise filter control */ +#define UNIPHIER_I2C_SETUP 0x20 /* setup time control */ + +#define UNIPHIER_I2C_DEFAULT_SPEED 100000 +#define UNIPHIER_I2C_MAX_SPEED 400000 + +struct uniphier_i2c_priv { + struct completion comp; + struct i2c_adapter adap; + void __iomem *membase; + struct clk *clk; + unsigned int busy_cnt; +}; + +static irqreturn_t uniphier_i2c_interrupt(int irq, void *dev_id) +{ + struct uniphier_i2c_priv *priv = dev_id; + + /* + * This hardware uses edge triggered interrupt. Do not touch the + * hardware registers in this handler to make sure to catch the next + * interrupt edge. Just send a complete signal and return. + */ + complete(&priv->comp); + + return IRQ_HANDLED; +} + +static int uniphier_i2c_xfer_byte(struct i2c_adapter *adap, u32 txdata, + u32 *rxdatap) +{ + struct uniphier_i2c_priv *priv = i2c_get_adapdata(adap); + unsigned long time_left; + u32 rxdata; + + reinit_completion(&priv->comp); + + txdata |= UNIPHIER_I2C_DTRM_IRQEN; + dev_dbg(&adap->dev, "write data: 0x%04x\n", txdata); + writel(txdata, priv->membase + UNIPHIER_I2C_DTRM); + + time_left = wait_for_completion_timeout(&priv->comp, adap->timeout); + if (unlikely(!time_left)) { + dev_err(&adap->dev, "transaction timeout\n"); + return -ETIMEDOUT; + } + + rxdata = readl(priv->membase + UNIPHIER_I2C_DREC); + dev_dbg(&adap->dev, "read data: 0x%04x\n", rxdata); + + if (rxdatap) + *rxdatap = rxdata; + + return 0; +} + +static int uniphier_i2c_send_byte(struct i2c_adapter *adap, u32 txdata) +{ + u32 rxdata; + int ret; + + ret = uniphier_i2c_xfer_byte(adap, txdata, &rxdata); + if (ret) + return ret; + + if (unlikely(rxdata & UNIPHIER_I2C_DREC_LAB)) { + dev_dbg(&adap->dev, "arbitration lost\n"); + return -EAGAIN; + } + if (unlikely(rxdata & UNIPHIER_I2C_DREC_LRB)) { + dev_dbg(&adap->dev, "could not get ACK\n"); + return -ENXIO; + } + + return 0; +} + +static int uniphier_i2c_tx(struct i2c_adapter *adap, u16 addr, u16 len, + const u8 *buf) +{ + int ret; + + dev_dbg(&adap->dev, "start condition\n"); + ret = uniphier_i2c_send_byte(adap, addr << 1 | + UNIPHIER_I2C_DTRM_STA | + UNIPHIER_I2C_DTRM_NACK); + if (ret) + return ret; + + while (len--) { + ret = uniphier_i2c_send_byte(adap, + UNIPHIER_I2C_DTRM_NACK | *buf++); + if (ret) + return ret; + } + + return 0; +} + +static int uniphier_i2c_rx(struct i2c_adapter *adap, u16 addr, u16 len, + u8 *buf) +{ + int ret; + + dev_dbg(&adap->dev, "start condition\n"); + ret = uniphier_i2c_send_byte(adap, addr << 1 | + UNIPHIER_I2C_DTRM_STA | + UNIPHIER_I2C_DTRM_NACK | + UNIPHIER_I2C_DTRM_RD); + if (ret) + return ret; + + while (len--) { + u32 rxdata; + + ret = uniphier_i2c_xfer_byte(adap, + len ? 0 : UNIPHIER_I2C_DTRM_NACK, + &rxdata); + if (ret) + return ret; + *buf++ = rxdata; + } + + return 0; +} + +static int uniphier_i2c_stop(struct i2c_adapter *adap) +{ + dev_dbg(&adap->dev, "stop condition\n"); + return uniphier_i2c_send_byte(adap, UNIPHIER_I2C_DTRM_STO | + UNIPHIER_I2C_DTRM_NACK); +} + +static int uniphier_i2c_master_xfer_one(struct i2c_adapter *adap, + struct i2c_msg *msg, bool stop) +{ + bool is_read = msg->flags & I2C_M_RD; + bool recovery = false; + int ret; + + dev_dbg(&adap->dev, "%s: addr=0x%02x, len=%d, stop=%d\n", + is_read ? "receive" : "transmit", msg->addr, msg->len, stop); + + if (is_read) + ret = uniphier_i2c_rx(adap, msg->addr, msg->len, msg->buf); + else + ret = uniphier_i2c_tx(adap, msg->addr, msg->len, msg->buf); + + if (ret == -EAGAIN) /* could not acquire bus. bail out without STOP */ + return ret; + + if (ret == -ETIMEDOUT) { + /* This error is fatal. Needs recovery. */ + stop = false; + recovery = true; + } + + if (stop) { + int ret2 = uniphier_i2c_stop(adap); + + if (ret2) { + /* Failed to issue STOP. The bus needs recovery. */ + recovery = true; + ret = ret ?: ret2; + } + } + + if (recovery) + i2c_recover_bus(adap); + + return ret; +} + +static int uniphier_i2c_check_bus_busy(struct i2c_adapter *adap) +{ + struct uniphier_i2c_priv *priv = i2c_get_adapdata(adap); + + if (!(readl(priv->membase + UNIPHIER_I2C_DREC) & + UNIPHIER_I2C_DREC_BBN)) { + if (priv->busy_cnt++ > 3) { + /* + * If bus busy continues too long, it is probably + * in a wrong state. Try bus recovery. + */ + i2c_recover_bus(adap); + priv->busy_cnt = 0; + } + + return -EAGAIN; + } + + priv->busy_cnt = 0; + return 0; +} + +static int uniphier_i2c_master_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + struct i2c_msg *msg, *emsg = msgs + num; + int ret; + + ret = uniphier_i2c_check_bus_busy(adap); + if (ret) + return ret; + + for (msg = msgs; msg < emsg; msg++) { + /* If next message is read, skip the stop condition */ + bool stop = !(msg + 1 < emsg && msg[1].flags & I2C_M_RD); + /* but, force it if I2C_M_STOP is set */ + if (msg->flags & I2C_M_STOP) + stop = true; + + ret = uniphier_i2c_master_xfer_one(adap, msg, stop); + if (ret) + return ret; + } + + return num; +} + +static u32 uniphier_i2c_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static const struct i2c_algorithm uniphier_i2c_algo = { + .master_xfer = uniphier_i2c_master_xfer, + .functionality = uniphier_i2c_functionality, +}; + +static void uniphier_i2c_reset(struct uniphier_i2c_priv *priv, bool reset_on) +{ + u32 val = UNIPHIER_I2C_BRST_RSCL; + + val |= reset_on ? 0 : UNIPHIER_I2C_BRST_FOEN; + writel(val, priv->membase + UNIPHIER_I2C_BRST); +} + +static int uniphier_i2c_get_scl(struct i2c_adapter *adap) +{ + struct uniphier_i2c_priv *priv = i2c_get_adapdata(adap); + + return !!(readl(priv->membase + UNIPHIER_I2C_BSTS) & + UNIPHIER_I2C_BSTS_SCL); +} + +static void uniphier_i2c_set_scl(struct i2c_adapter *adap, int val) +{ + struct uniphier_i2c_priv *priv = i2c_get_adapdata(adap); + + writel(val ? UNIPHIER_I2C_BRST_RSCL : 0, + priv->membase + UNIPHIER_I2C_BRST); +} + +static int uniphier_i2c_get_sda(struct i2c_adapter *adap) +{ + struct uniphier_i2c_priv *priv = i2c_get_adapdata(adap); + + return !!(readl(priv->membase + UNIPHIER_I2C_BSTS) & + UNIPHIER_I2C_BSTS_SDA); +} + +static void uniphier_i2c_unprepare_recovery(struct i2c_adapter *adap) +{ + uniphier_i2c_reset(i2c_get_adapdata(adap), false); +} + +static struct i2c_bus_recovery_info uniphier_i2c_bus_recovery_info = { + .recover_bus = i2c_generic_scl_recovery, + .get_scl = uniphier_i2c_get_scl, + .set_scl = uniphier_i2c_set_scl, + .get_sda = uniphier_i2c_get_sda, + .unprepare_recovery = uniphier_i2c_unprepare_recovery, +}; + +static int uniphier_i2c_clk_init(struct device *dev, + struct uniphier_i2c_priv *priv) +{ + struct device_node *np = dev->of_node; + unsigned long clk_rate; + u32 bus_speed; + int ret; + + if (of_property_read_u32(np, "clock-frequency", &bus_speed)) + bus_speed = UNIPHIER_I2C_DEFAULT_SPEED; + + if (bus_speed > UNIPHIER_I2C_MAX_SPEED) + bus_speed = UNIPHIER_I2C_MAX_SPEED; + + /* Get input clk rate through clk driver */ + priv->clk = devm_clk_get(dev, NULL); + if (IS_ERR(priv->clk)) { + dev_err(dev, "failed to get clock\n"); + return PTR_ERR(priv->clk); + } + + ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; + + clk_rate = clk_get_rate(priv->clk); + + uniphier_i2c_reset(priv, true); + + writel((clk_rate / bus_speed / 2 << 16) | (clk_rate / bus_speed), + priv->membase + UNIPHIER_I2C_CLK); + + uniphier_i2c_reset(priv, false); + + return 0; +} + +static int uniphier_i2c_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct uniphier_i2c_priv *priv; + struct resource *regs; + int irq; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->membase = devm_ioremap_resource(dev, regs); + if (IS_ERR(priv->membase)) + return PTR_ERR(priv->membase); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(dev, "failed to get IRQ number"); + return irq; + } + + init_completion(&priv->comp); + priv->adap.owner = THIS_MODULE; + priv->adap.algo = &uniphier_i2c_algo; + priv->adap.dev.parent = dev; + priv->adap.dev.of_node = dev->of_node; + strlcpy(priv->adap.name, "UniPhier I2C", sizeof(priv->adap.name)); + priv->adap.bus_recovery_info = &uniphier_i2c_bus_recovery_info; + i2c_set_adapdata(&priv->adap, priv); + platform_set_drvdata(pdev, priv); + + ret = uniphier_i2c_clk_init(dev, priv); + if (ret) + return ret; + + ret = devm_request_irq(dev, irq, uniphier_i2c_interrupt, 0, pdev->name, + priv); + if (ret) { + dev_err(dev, "failed to request irq %d\n", irq); + goto err; + } + + ret = i2c_add_adapter(&priv->adap); + if (ret) { + dev_err(dev, "failed to add I2C adapter\n"); + goto err; + } + +err: + if (ret) + clk_disable_unprepare(priv->clk); + + return ret; +} + +static int uniphier_i2c_remove(struct platform_device *pdev) +{ + struct uniphier_i2c_priv *priv = platform_get_drvdata(pdev); + + i2c_del_adapter(&priv->adap); + clk_disable_unprepare(priv->clk); + + return 0; +} + +static const struct of_device_id uniphier_i2c_match[] = { + { .compatible = "socionext,uniphier-i2c" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, uniphier_i2c_match); + +static struct platform_driver uniphier_i2c_drv = { + .probe = uniphier_i2c_probe, + .remove = uniphier_i2c_remove, + .driver = { + .name = "uniphier-i2c", + .of_match_table = uniphier_i2c_match, + }, +}; +module_platform_driver(uniphier_i2c_drv); + +MODULE_AUTHOR("Masahiro Yamada <yamada.masahiro@socionext.com>"); +MODULE_DESCRIPTION("UniPhier I2C bus driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index e23a7b068c60..0b20449e48cf 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -662,8 +662,10 @@ static void __xiic_start_xfer(struct xiic_i2c *i2c) static void xiic_start_xfer(struct xiic_i2c *i2c) { - + spin_lock(&i2c->lock); + xiic_reinit(i2c); __xiic_start_xfer(i2c); + spin_unlock(&i2c->lock); } static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index a59c3111f7fb..ba8eb087f224 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -99,27 +99,40 @@ struct gsb_buffer { }; } __packed; -static int acpi_i2c_add_resource(struct acpi_resource *ares, void *data) +struct acpi_i2c_lookup { + struct i2c_board_info *info; + acpi_handle adapter_handle; + acpi_handle device_handle; +}; + +static int acpi_i2c_find_address(struct acpi_resource *ares, void *data) { - struct i2c_board_info *info = data; + struct acpi_i2c_lookup *lookup = data; + struct i2c_board_info *info = lookup->info; + struct acpi_resource_i2c_serialbus *sb; + acpi_handle adapter_handle; + acpi_status status; - if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) { - struct acpi_resource_i2c_serialbus *sb; + if (info->addr || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) + return 1; - sb = &ares->data.i2c_serial_bus; - if (!info->addr && sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) { - info->addr = sb->slave_address; - if (sb->access_mode == ACPI_I2C_10BIT_MODE) - info->flags |= I2C_CLIENT_TEN; - } - } else if (!info->irq) { - struct resource r; + sb = &ares->data.i2c_serial_bus; + if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) + return 1; - if (acpi_dev_resource_interrupt(ares, 0, &r)) - info->irq = r.start; + /* + * Extract the ResourceSource and make sure that the handle matches + * with the I2C adapter handle. + */ + status = acpi_get_handle(lookup->device_handle, + sb->resource_source.string_ptr, + &adapter_handle); + if (ACPI_SUCCESS(status) && adapter_handle == lookup->adapter_handle) { + info->addr = sb->slave_address; + if (sb->access_mode == ACPI_I2C_10BIT_MODE) + info->flags |= I2C_CLIENT_TEN; } - /* Tell the ACPI core to skip this resource */ return 1; } @@ -128,6 +141,8 @@ static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level, { struct i2c_adapter *adapter = data; struct list_head resource_list; + struct acpi_i2c_lookup lookup; + struct resource_entry *entry; struct i2c_board_info info; struct acpi_device *adev; int ret; @@ -140,14 +155,37 @@ static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level, memset(&info, 0, sizeof(info)); info.fwnode = acpi_fwnode_handle(adev); + memset(&lookup, 0, sizeof(lookup)); + lookup.adapter_handle = ACPI_HANDLE(&adapter->dev); + lookup.device_handle = handle; + lookup.info = &info; + + /* + * Look up for I2cSerialBus resource with ResourceSource that + * matches with this adapter. + */ INIT_LIST_HEAD(&resource_list); ret = acpi_dev_get_resources(adev, &resource_list, - acpi_i2c_add_resource, &info); + acpi_i2c_find_address, &lookup); acpi_dev_free_resource_list(&resource_list); if (ret < 0 || !info.addr) return AE_OK; + /* Then fill IRQ number if any */ + ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL); + if (ret < 0) + return AE_OK; + + resource_list_for_each_entry(entry, &resource_list) { + if (resource_type(entry->res) == IORESOURCE_IRQ) { + info.irq = entry->res->start; + break; + } + } + + acpi_dev_free_resource_list(&resource_list); + adev->power.flags.ignore_parent = true; strlcpy(info.type, dev_name(&adev->dev), sizeof(info.type)); if (!i2c_new_device(adapter, &info)) { @@ -160,6 +198,8 @@ static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level, return AE_OK; } +#define ACPI_I2C_MAX_SCAN_DEPTH 32 + /** * acpi_i2c_register_devices - enumerate I2C slave devices behind adapter * @adap: pointer to adapter @@ -170,17 +210,13 @@ static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level, */ static void acpi_i2c_register_devices(struct i2c_adapter *adap) { - acpi_handle handle; acpi_status status; - if (!adap->dev.parent) - return; - - handle = ACPI_HANDLE(adap->dev.parent); - if (!handle) + if (!has_acpi_companion(&adap->dev)) return; - status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1, + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, + ACPI_I2C_MAX_SCAN_DEPTH, acpi_i2c_add_device, NULL, adap, NULL); if (ACPI_FAILURE(status)) @@ -679,7 +715,7 @@ static int i2c_device_probe(struct device *dev) if (wakeirq > 0 && wakeirq != client->irq) status = dev_pm_set_dedicated_wake_irq(dev, wakeirq); else if (client->irq > 0) - status = dev_pm_set_wake_irq(dev, wakeirq); + status = dev_pm_set_wake_irq(dev, client->irq); else status = 0; diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index 71c7a3975b62..2413ec9f8207 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -235,7 +235,7 @@ static int i2cdev_check_addr(struct i2c_adapter *adapter, unsigned int addr) return result; } -static noinline int i2cdev_ioctl_rdrw(struct i2c_client *client, +static noinline int i2cdev_ioctl_rdwr(struct i2c_client *client, unsigned long arg) { struct i2c_rdwr_ioctl_data rdwr_arg; @@ -250,7 +250,7 @@ static noinline int i2cdev_ioctl_rdrw(struct i2c_client *client, /* Put an arbitrary limit on the number of messages that can * be sent at once */ - if (rdwr_arg.nmsgs > I2C_RDRW_IOCTL_MAX_MSGS) + if (rdwr_arg.nmsgs > I2C_RDWR_IOCTL_MAX_MSGS) return -EINVAL; rdwr_pa = memdup_user(rdwr_arg.msgs, @@ -421,16 +421,6 @@ static long i2cdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) switch (cmd) { case I2C_SLAVE: case I2C_SLAVE_FORCE: - /* NOTE: devices set up to work with "new style" drivers - * can't use I2C_SLAVE, even when the device node is not - * bound to a driver. Only I2C_SLAVE_FORCE will work. - * - * Setting the PEC flag here won't affect kernel drivers, - * which will be using the i2c_client node registered with - * the driver model core. Likewise, when that client has - * the PEC flag already set, the i2c-dev driver won't see - * (or use) this setting. - */ if ((arg > 0x3ff) || (((client->flags & I2C_M_TEN) == 0) && arg > 0x7f)) return -EINVAL; @@ -446,6 +436,13 @@ static long i2cdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) client->flags &= ~I2C_M_TEN; return 0; case I2C_PEC: + /* + * Setting the PEC flag here won't affect kernel drivers, + * which will be using the i2c_client node registered with + * the driver model core. Likewise, when that client has + * the PEC flag already set, the i2c-dev driver won't see + * (or use) this setting. + */ if (arg) client->flags |= I2C_CLIENT_PEC; else @@ -456,7 +453,7 @@ static long i2cdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) return put_user(funcs, (unsigned long __user *)arg); case I2C_RDWR: - return i2cdev_ioctl_rdrw(client, arg); + return i2cdev_ioctl_rdwr(client, arg); case I2C_SMBUS: return i2cdev_ioctl_smbus(client, arg); diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c index 2ba7c0fbc615..00fc5b1c7b66 100644 --- a/drivers/i2c/i2c-mux.c +++ b/drivers/i2c/i2c-mux.c @@ -25,6 +25,7 @@ #include <linux/i2c.h> #include <linux/i2c-mux.h> #include <linux/of.h> +#include <linux/acpi.h> /* multiplexer per channel data */ struct i2c_mux_priv { @@ -173,6 +174,13 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent, } } + /* + * Associate the mux channel with an ACPI node. + */ + if (has_acpi_companion(mux_dev)) + acpi_preset_companion(&priv->adap.dev, ACPI_COMPANION(mux_dev), + chan_id); + if (force_nr) { priv->adap.nr = force_nr; ret = i2c_add_numbered_adapter(&priv->adap); |