summaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/Kconfig6
-rw-r--r--drivers/i2c/busses/i2c-axxia.c40
-rw-r--r--drivers/i2c/busses/i2c-nvidia-gpu.c9
-rw-r--r--drivers/i2c/busses/i2c-rcar.c9
-rw-r--r--drivers/i2c/busses/i2c-scmi.c10
-rw-r--r--drivers/i2c/busses/i2c-uniphier-f.c49
-rw-r--r--drivers/i2c/busses/i2c-uniphier.c8
-rw-r--r--drivers/i2c/i2c-core-acpi.c64
8 files changed, 142 insertions, 53 deletions
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index efc3354d60ae..c6b7fc7b67d6 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -68,7 +68,7 @@ config I2C_MUX
This support is also available as a module. If so, the module
will be called i2c-mux.
-source drivers/i2c/muxes/Kconfig
+source "drivers/i2c/muxes/Kconfig"
config I2C_HELPER_AUTO
bool "Autoselect pertinent helper modules"
@@ -94,8 +94,8 @@ config I2C_SMBUS
This support is also available as a module. If so, the module
will be called i2c-smbus.
-source drivers/i2c/algos/Kconfig
-source drivers/i2c/busses/Kconfig
+source "drivers/i2c/algos/Kconfig"
+source "drivers/i2c/busses/Kconfig"
config I2C_STUB
tristate "I2C/SMBus Test Stub"
diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c
index 8e60048a33f8..51d34959709b 100644
--- a/drivers/i2c/busses/i2c-axxia.c
+++ b/drivers/i2c/busses/i2c-axxia.c
@@ -74,8 +74,7 @@
MST_STATUS_ND)
#define MST_STATUS_ERR (MST_STATUS_NAK | \
MST_STATUS_AL | \
- MST_STATUS_IP | \
- MST_STATUS_TSS)
+ MST_STATUS_IP)
#define MST_TX_BYTES_XFRD 0x50
#define MST_RX_BYTES_XFRD 0x54
#define SCL_HIGH_PERIOD 0x80
@@ -241,7 +240,7 @@ static int axxia_i2c_empty_rx_fifo(struct axxia_i2c_dev *idev)
*/
if (c <= 0 || c > I2C_SMBUS_BLOCK_MAX) {
idev->msg_err = -EPROTO;
- i2c_int_disable(idev, ~0);
+ i2c_int_disable(idev, ~MST_STATUS_TSS);
complete(&idev->msg_complete);
break;
}
@@ -299,14 +298,19 @@ static irqreturn_t axxia_i2c_isr(int irq, void *_dev)
if (status & MST_STATUS_SCC) {
/* Stop completed */
- i2c_int_disable(idev, ~0);
+ i2c_int_disable(idev, ~MST_STATUS_TSS);
complete(&idev->msg_complete);
} else if (status & MST_STATUS_SNS) {
/* Transfer done */
- i2c_int_disable(idev, ~0);
+ i2c_int_disable(idev, ~MST_STATUS_TSS);
if (i2c_m_rd(idev->msg) && idev->msg_xfrd < idev->msg->len)
axxia_i2c_empty_rx_fifo(idev);
complete(&idev->msg_complete);
+ } else if (status & MST_STATUS_TSS) {
+ /* Transfer timeout */
+ idev->msg_err = -ETIMEDOUT;
+ i2c_int_disable(idev, ~MST_STATUS_TSS);
+ complete(&idev->msg_complete);
} else if (unlikely(status & MST_STATUS_ERR)) {
/* Transfer error */
i2c_int_disable(idev, ~0);
@@ -339,10 +343,10 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)
u32 rx_xfer, tx_xfer;
u32 addr_1, addr_2;
unsigned long time_left;
+ unsigned int wt_value;
idev->msg = msg;
idev->msg_xfrd = 0;
- idev->msg_err = 0;
reinit_completion(&idev->msg_complete);
if (i2c_m_ten(msg)) {
@@ -383,9 +387,18 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)
else if (axxia_i2c_fill_tx_fifo(idev) != 0)
int_mask |= MST_STATUS_TFL;
+ wt_value = WT_VALUE(readl(idev->base + WAIT_TIMER_CONTROL));
+ /* Disable wait timer temporarly */
+ writel(wt_value, idev->base + WAIT_TIMER_CONTROL);
+ /* Check if timeout error happened */
+ if (idev->msg_err)
+ goto out;
+
/* Start manual mode */
writel(CMD_MANUAL, idev->base + MST_COMMAND);
+ writel(WT_EN | wt_value, idev->base + WAIT_TIMER_CONTROL);
+
i2c_int_enable(idev, int_mask);
time_left = wait_for_completion_timeout(&idev->msg_complete,
@@ -396,13 +409,15 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)
if (readl(idev->base + MST_COMMAND) & CMD_BUSY)
dev_warn(idev->dev, "busy after xfer\n");
- if (time_left == 0)
+ if (time_left == 0) {
idev->msg_err = -ETIMEDOUT;
-
- if (idev->msg_err == -ETIMEDOUT)
i2c_recover_bus(&idev->adapter);
+ axxia_i2c_init(idev);
+ }
- if (unlikely(idev->msg_err) && idev->msg_err != -ENXIO)
+out:
+ if (unlikely(idev->msg_err) && idev->msg_err != -ENXIO &&
+ idev->msg_err != -ETIMEDOUT)
axxia_i2c_init(idev);
return idev->msg_err;
@@ -410,7 +425,7 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)
static int axxia_i2c_stop(struct axxia_i2c_dev *idev)
{
- u32 int_mask = MST_STATUS_ERR | MST_STATUS_SCC;
+ u32 int_mask = MST_STATUS_ERR | MST_STATUS_SCC | MST_STATUS_TSS;
unsigned long time_left;
reinit_completion(&idev->msg_complete);
@@ -437,6 +452,9 @@ axxia_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
int i;
int ret = 0;
+ idev->msg_err = 0;
+ i2c_int_enable(idev, MST_STATUS_TSS);
+
for (i = 0; ret == 0 && i < num; ++i)
ret = axxia_i2c_xfer_msg(idev, &msgs[i]);
diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c
index 8822357bca0c..4e67d5ed480e 100644
--- a/drivers/i2c/busses/i2c-nvidia-gpu.c
+++ b/drivers/i2c/busses/i2c-nvidia-gpu.c
@@ -89,7 +89,7 @@ static int gpu_i2c_check_status(struct gpu_i2c_dev *i2cd)
if (time_is_before_jiffies(target)) {
dev_err(i2cd->dev, "i2c timeout error %x\n", val);
- return -ETIME;
+ return -ETIMEDOUT;
}
val = readl(i2cd->regs + I2C_MST_CNTL);
@@ -97,9 +97,9 @@ static int gpu_i2c_check_status(struct gpu_i2c_dev *i2cd)
case I2C_MST_CNTL_STATUS_OKAY:
return 0;
case I2C_MST_CNTL_STATUS_NO_ACK:
- return -EIO;
+ return -ENXIO;
case I2C_MST_CNTL_STATUS_TIMEOUT:
- return -ETIME;
+ return -ETIMEDOUT;
default:
return 0;
}
@@ -218,6 +218,7 @@ stop:
static const struct i2c_adapter_quirks gpu_i2c_quirks = {
.max_read_len = 4,
+ .max_comb_2nd_msg_len = 4,
.flags = I2C_AQ_COMB_WRITE_THEN_READ,
};
@@ -341,7 +342,7 @@ static void gpu_i2c_remove(struct pci_dev *pdev)
pci_free_irq_vectors(pdev);
}
-static int gpu_i2c_resume(struct device *dev)
+static __maybe_unused int gpu_i2c_resume(struct device *dev)
{
struct gpu_i2c_dev *i2cd = dev_get_drvdata(dev);
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 4aa7dde876f3..254e6219e538 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -779,6 +779,11 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
pm_runtime_get_sync(dev);
+ /* Check bus state before init otherwise bus busy info will be lost */
+ ret = rcar_i2c_bus_barrier(priv);
+ if (ret < 0)
+ goto out;
+
/* Gen3 needs a reset before allowing RXDMA once */
if (priv->devtype == I2C_RCAR_GEN3) {
priv->flags |= ID_P_NO_RXDMA;
@@ -791,10 +796,6 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
rcar_i2c_init(priv);
- ret = rcar_i2c_bus_barrier(priv);
- if (ret < 0)
- goto out;
-
for (i = 0; i < num; i++)
rcar_i2c_request_dma(priv, msgs + i);
diff --git a/drivers/i2c/busses/i2c-scmi.c b/drivers/i2c/busses/i2c-scmi.c
index 7e9a2bbf5ddc..ff3f4553648f 100644
--- a/drivers/i2c/busses/i2c-scmi.c
+++ b/drivers/i2c/busses/i2c-scmi.c
@@ -367,6 +367,7 @@ static int acpi_smbus_cmi_add(struct acpi_device *device)
{
struct acpi_smbus_cmi *smbus_cmi;
const struct acpi_device_id *id;
+ int ret;
smbus_cmi = kzalloc(sizeof(struct acpi_smbus_cmi), GFP_KERNEL);
if (!smbus_cmi)
@@ -388,8 +389,10 @@ static int acpi_smbus_cmi_add(struct acpi_device *device)
acpi_walk_namespace(ACPI_TYPE_METHOD, smbus_cmi->handle, 1,
acpi_smbus_cmi_query_methods, NULL, smbus_cmi, NULL);
- if (smbus_cmi->cap_info == 0)
+ if (smbus_cmi->cap_info == 0) {
+ ret = -ENODEV;
goto err;
+ }
snprintf(smbus_cmi->adapter.name, sizeof(smbus_cmi->adapter.name),
"SMBus CMI adapter %s",
@@ -400,7 +403,8 @@ static int acpi_smbus_cmi_add(struct acpi_device *device)
smbus_cmi->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
smbus_cmi->adapter.dev.parent = &device->dev;
- if (i2c_add_adapter(&smbus_cmi->adapter)) {
+ ret = i2c_add_adapter(&smbus_cmi->adapter);
+ if (ret) {
dev_err(&device->dev, "Couldn't register adapter!\n");
goto err;
}
@@ -410,7 +414,7 @@ static int acpi_smbus_cmi_add(struct acpi_device *device)
err:
kfree(smbus_cmi);
device->driver_data = NULL;
- return -EIO;
+ return ret;
}
static int acpi_smbus_cmi_remove(struct acpi_device *device)
diff --git a/drivers/i2c/busses/i2c-uniphier-f.c b/drivers/i2c/busses/i2c-uniphier-f.c
index dd384743dbbd..03da4a539a2f 100644
--- a/drivers/i2c/busses/i2c-uniphier-f.c
+++ b/drivers/i2c/busses/i2c-uniphier-f.c
@@ -173,8 +173,6 @@ static irqreturn_t uniphier_fi2c_interrupt(int irq, void *dev_id)
"interrupt: enabled_irqs=%04x, irq_status=%04x\n",
priv->enabled_irqs, irq_status);
- uniphier_fi2c_clear_irqs(priv, irq_status);
-
if (irq_status & UNIPHIER_FI2C_INT_STOP)
goto complete;
@@ -214,7 +212,13 @@ static irqreturn_t uniphier_fi2c_interrupt(int irq, void *dev_id)
if (irq_status & (UNIPHIER_FI2C_INT_RF | UNIPHIER_FI2C_INT_RB)) {
uniphier_fi2c_drain_rxfifo(priv);
- if (!priv->len)
+ /*
+ * If the number of bytes to read is multiple of the FIFO size
+ * (msg->len == 8, 16, 24, ...), the INT_RF bit is set a little
+ * earlier than INT_RB. We wait for INT_RB to confirm the
+ * completion of the current message.
+ */
+ if (!priv->len && (irq_status & UNIPHIER_FI2C_INT_RB))
goto data_done;
if (unlikely(priv->flags & UNIPHIER_FI2C_MANUAL_NACK)) {
@@ -253,12 +257,20 @@ complete:
}
handled:
+ /*
+ * This controller makes a pause while any bit of the IRQ status is
+ * asserted. Clear the asserted bit to kick the controller just before
+ * exiting the handler.
+ */
+ uniphier_fi2c_clear_irqs(priv, irq_status);
+
spin_unlock(&priv->lock);
return IRQ_HANDLED;
}
-static void uniphier_fi2c_tx_init(struct uniphier_fi2c_priv *priv, u16 addr)
+static void uniphier_fi2c_tx_init(struct uniphier_fi2c_priv *priv, u16 addr,
+ bool repeat)
{
priv->enabled_irqs |= UNIPHIER_FI2C_INT_TE;
uniphier_fi2c_set_irqs(priv);
@@ -268,8 +280,12 @@ static void uniphier_fi2c_tx_init(struct uniphier_fi2c_priv *priv, u16 addr)
/* set slave address */
writel(UNIPHIER_FI2C_DTTX_CMD | addr << 1,
priv->membase + UNIPHIER_FI2C_DTTX);
- /* first chunk of data */
- uniphier_fi2c_fill_txfifo(priv, true);
+ /*
+ * First chunk of data. For a repeated START condition, do not write
+ * data to the TX fifo here to avoid the timing issue.
+ */
+ if (!repeat)
+ uniphier_fi2c_fill_txfifo(priv, true);
}
static void uniphier_fi2c_rx_init(struct uniphier_fi2c_priv *priv, u16 addr)
@@ -350,7 +366,7 @@ static int uniphier_fi2c_master_xfer_one(struct i2c_adapter *adap,
if (is_read)
uniphier_fi2c_rx_init(priv, msg->addr);
else
- uniphier_fi2c_tx_init(priv, msg->addr);
+ uniphier_fi2c_tx_init(priv, msg->addr, repeat);
dev_dbg(&adap->dev, "start condition\n");
/*
@@ -502,9 +518,26 @@ static void uniphier_fi2c_hw_init(struct uniphier_fi2c_priv *priv)
uniphier_fi2c_reset(priv);
+ /*
+ * Standard-mode: tLOW + tHIGH = 10 us
+ * Fast-mode: tLOW + tHIGH = 2.5 us
+ */
writel(cyc, priv->membase + UNIPHIER_FI2C_CYC);
- writel(cyc / 2, priv->membase + UNIPHIER_FI2C_LCTL);
+ /*
+ * Standard-mode: tLOW = 4.7 us, tHIGH = 4.0 us, tBUF = 4.7 us
+ * Fast-mode: tLOW = 1.3 us, tHIGH = 0.6 us, tBUF = 1.3 us
+ * "tLow/tHIGH = 5/4" meets both.
+ */
+ writel(cyc * 5 / 9, priv->membase + UNIPHIER_FI2C_LCTL);
+ /*
+ * Standard-mode: tHD;STA = 4.0 us, tSU;STA = 4.7 us, tSU;STO = 4.0 us
+ * Fast-mode: tHD;STA = 0.6 us, tSU;STA = 0.6 us, tSU;STO = 0.6 us
+ */
writel(cyc / 2, priv->membase + UNIPHIER_FI2C_SSUT);
+ /*
+ * Standard-mode: tSU;DAT = 250 ns
+ * Fast-mode: tSU;DAT = 100 ns
+ */
writel(cyc / 16, priv->membase + UNIPHIER_FI2C_DSUT);
uniphier_fi2c_prepare_operation(priv);
diff --git a/drivers/i2c/busses/i2c-uniphier.c b/drivers/i2c/busses/i2c-uniphier.c
index 454f914ae66d..c488e558aef7 100644
--- a/drivers/i2c/busses/i2c-uniphier.c
+++ b/drivers/i2c/busses/i2c-uniphier.c
@@ -320,7 +320,13 @@ static void uniphier_i2c_hw_init(struct uniphier_i2c_priv *priv)
uniphier_i2c_reset(priv, true);
- writel((cyc / 2 << 16) | cyc, priv->membase + UNIPHIER_I2C_CLK);
+ /*
+ * Bit30-16: clock cycles of tLOW.
+ * Standard-mode: tLOW = 4.7 us, tHIGH = 4.0 us
+ * Fast-mode: tLOW = 1.3 us, tHIGH = 0.6 us
+ * "tLow/tHIGH = 5/4" meets both.
+ */
+ writel((cyc * 5 / 9 << 16) | cyc, priv->membase + UNIPHIER_I2C_CLK);
uniphier_i2c_reset(priv, false);
}
diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c
index 32affd3fa8bd..272800692088 100644
--- a/drivers/i2c/i2c-core-acpi.c
+++ b/drivers/i2c/i2c-core-acpi.c
@@ -45,6 +45,33 @@ struct i2c_acpi_lookup {
u32 min_speed;
};
+/**
+ * i2c_acpi_get_i2c_resource - Gets I2cSerialBus resource if type matches
+ * @ares: ACPI resource
+ * @i2c: Pointer to I2cSerialBus resource will be returned here
+ *
+ * Checks if the given ACPI resource is of type I2cSerialBus.
+ * In this case, returns a pointer to it to the caller.
+ *
+ * Returns true if resource type is of I2cSerialBus, otherwise false.
+ */
+bool i2c_acpi_get_i2c_resource(struct acpi_resource *ares,
+ struct acpi_resource_i2c_serialbus **i2c)
+{
+ struct acpi_resource_i2c_serialbus *sb;
+
+ if (ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
+ return false;
+
+ sb = &ares->data.i2c_serial_bus;
+ if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C)
+ return false;
+
+ *i2c = sb;
+ return true;
+}
+EXPORT_SYMBOL_GPL(i2c_acpi_get_i2c_resource);
+
static int i2c_acpi_fill_info(struct acpi_resource *ares, void *data)
{
struct i2c_acpi_lookup *lookup = data;
@@ -52,11 +79,7 @@ static int i2c_acpi_fill_info(struct acpi_resource *ares, void *data)
struct acpi_resource_i2c_serialbus *sb;
acpi_status status;
- if (info->addr || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
- return 1;
-
- sb = &ares->data.i2c_serial_bus;
- if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C)
+ if (info->addr || !i2c_acpi_get_i2c_resource(ares, &sb))
return 1;
if (lookup->index != -1 && lookup->n++ != lookup->index)
@@ -65,7 +88,7 @@ static int i2c_acpi_fill_info(struct acpi_resource *ares, void *data)
status = acpi_get_handle(lookup->device_handle,
sb->resource_source.string_ptr,
&lookup->adapter_handle);
- if (!ACPI_SUCCESS(status))
+ if (ACPI_FAILURE(status))
return 1;
info->addr = sb->slave_address;
@@ -386,20 +409,22 @@ struct notifier_block i2c_acpi_notifier = {
*
* Also see i2c_new_device, which this function calls to create the i2c-client.
*
- * Returns a pointer to the new i2c-client, or NULL if the adapter is not found.
+ * Returns a pointer to the new i2c-client, or error pointer in case of failure.
+ * Specifically, -EPROBE_DEFER is returned if the adapter is not found.
*/
struct i2c_client *i2c_acpi_new_device(struct device *dev, int index,
struct i2c_board_info *info)
{
struct i2c_acpi_lookup lookup;
struct i2c_adapter *adapter;
+ struct i2c_client *client;
struct acpi_device *adev;
LIST_HEAD(resource_list);
int ret;
adev = ACPI_COMPANION(dev);
if (!adev)
- return NULL;
+ return ERR_PTR(-EINVAL);
memset(&lookup, 0, sizeof(lookup));
lookup.info = info;
@@ -408,16 +433,23 @@ struct i2c_client *i2c_acpi_new_device(struct device *dev, int index,
ret = acpi_dev_get_resources(adev, &resource_list,
i2c_acpi_fill_info, &lookup);
+ if (ret < 0)
+ return ERR_PTR(ret);
+
acpi_dev_free_resource_list(&resource_list);
- if (ret < 0 || !info->addr)
- return NULL;
+ if (!info->addr)
+ return ERR_PTR(-EADDRNOTAVAIL);
adapter = i2c_acpi_find_adapter_by_handle(lookup.adapter_handle);
if (!adapter)
- return NULL;
+ return ERR_PTR(-EPROBE_DEFER);
+
+ client = i2c_new_device(adapter, info);
+ if (!client)
+ return ERR_PTR(-ENODEV);
- return i2c_new_device(adapter, info);
+ return client;
}
EXPORT_SYMBOL_GPL(i2c_acpi_new_device);
@@ -525,13 +557,7 @@ i2c_acpi_space_handler(u32 function, acpi_physical_address command,
goto err;
}
- if (!value64 || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) {
- ret = AE_BAD_PARAMETER;
- goto err;
- }
-
- sb = &ares->data.i2c_serial_bus;
- if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) {
+ if (!value64 || !i2c_acpi_get_i2c_resource(ares, &sb)) {
ret = AE_BAD_PARAMETER;
goto err;
}
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-15 12:05:38 +0300