diff options
Diffstat (limited to 'drivers/i2c')
-rw-r--r-- | drivers/i2c/busses/i2c-qup.c | 34 |
1 files changed, 26 insertions, 8 deletions
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c index 715d4d73efd0..f9009d6312f1 100644 --- a/drivers/i2c/busses/i2c-qup.c +++ b/drivers/i2c/busses/i2c-qup.c @@ -112,6 +112,7 @@ #define SET_BIT 0x1 #define RESET_BIT 0x0 #define ONE_BYTE 0x1 +#define QUP_I2C_MX_CONFIG_DURING_RUN BIT(31) struct qup_i2c_block { int count; @@ -147,6 +148,12 @@ struct qup_i2c_dev { /* QUP core errors */ u32 qup_err; + /* To check if this is the last msg */ + bool is_last; + + /* To configure when bus is in run state */ + int config_run; + struct completion xfer; }; @@ -269,7 +276,7 @@ static int qup_i2c_wait_ready(struct qup_i2c_dev *qup, int op, bool val, status = readl(qup->base + QUP_I2C_STATUS); if (((opflags & op) >> shift) == val) { - if (op == QUP_OUT_NOT_EMPTY) { + if ((op == QUP_OUT_NOT_EMPTY) && qup->is_last) { if (!(status & I2C_STATUS_BUS_ACTIVE)) return 0; } else { @@ -290,6 +297,8 @@ static void qup_i2c_set_write_mode_v2(struct qup_i2c_dev *qup, /* Number of entries to shift out, including the tags */ int total = msg->len + qup->blk.tx_tag_len; + total |= qup->config_run; + if (total < qup->out_fifo_sz) { /* FIFO mode */ writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE); @@ -443,7 +452,7 @@ static int qup_i2c_set_tags(u8 *tags, struct qup_i2c_dev *qup, } /* Send _STOP commands for the last block */ - if (qup->blk.pos == (qup->blk.count - 1)) { + if ((qup->blk.pos == (qup->blk.count - 1)) && qup->is_last) { if (msg->flags & I2C_M_RD) tags[len++] = QUP_TAG_V2_DATARD_STOP; else @@ -581,7 +590,6 @@ static int qup_i2c_write_one(struct qup_i2c_dev *qup, struct i2c_msg *msg) /* Wait for the outstanding data in the fifo to drain */ ret = qup_i2c_wait_ready(qup, QUP_OUT_NOT_EMPTY, RESET_BIT, ONE_BYTE); - err: disable_irq(qup->irq); qup->msg = NULL; @@ -608,18 +616,20 @@ static void qup_i2c_set_read_mode_v2(struct qup_i2c_dev *qup, int len) int tx_len = qup->blk.tx_tag_len; len += qup->blk.rx_tag_len; + len |= qup->config_run; + tx_len |= qup->config_run; if (len < qup->in_fifo_sz) { /* FIFO mode */ writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE); - writel(len, qup->base + QUP_MX_READ_CNT); writel(tx_len, qup->base + QUP_MX_WRITE_CNT); + writel(len, qup->base + QUP_MX_READ_CNT); } else { /* BLOCK mode (transfer data on chunks) */ writel(QUP_INPUT_BLK_MODE | QUP_REPACK_EN, qup->base + QUP_IO_MODE); - writel(len, qup->base + QUP_MX_INPUT_CNT); writel(tx_len, qup->base + QUP_MX_OUTPUT_CNT); + writel(len, qup->base + QUP_MX_INPUT_CNT); } } @@ -866,6 +876,12 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap, goto out; } + qup->is_last = (idx == (num - 1)); + if (idx) + qup->config_run = QUP_I2C_MX_CONFIG_DURING_RUN; + else + qup->config_run = 0; + reinit_completion(&qup->xfer); if (msgs[idx].flags & I2C_M_RD) @@ -873,13 +889,13 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap, else ret = qup_i2c_write_one_v2(qup, &msgs[idx]); - if (!ret) - ret = qup_i2c_change_state(qup, QUP_RESET_STATE); - if (ret) break; } + if (!ret) + ret = qup_i2c_change_state(qup, QUP_RESET_STATE); + if (ret == 0) ret = num; out: @@ -1057,6 +1073,8 @@ static int qup_i2c_probe(struct platform_device *pdev) i2c_set_adapdata(&qup->adap, qup); qup->adap.dev.parent = qup->dev; qup->adap.dev.of_node = pdev->dev.of_node; + qup->is_last = 1; + strlcpy(qup->adap.name, "QUP I2C adapter", sizeof(qup->adap.name)); pm_runtime_set_autosuspend_delay(qup->dev, MSEC_PER_SEC); |