diff options
Diffstat (limited to 'drivers/i2c/busses')
| -rw-r--r-- | drivers/i2c/busses/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/i2c/busses/Makefile | 1 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-cadence.c | 28 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-common.c | 25 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-core.h | 3 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-pcidrv.c | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-platdrv.c | 17 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-eg20t.c | 1 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-fsi.c | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-mlxcpld.c | 4 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-puv3.c | 275 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-qcom-geni.c | 6 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-rcar.c | 3 |
13 files changed, 57 insertions, 321 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 735bf31a3fdf..88639e52c73a 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -866,17 +866,6 @@ config I2C_PNX This driver can also be built as a module. If so, the module will be called i2c-pnx. -config I2C_PUV3 - tristate "PKUnity v3 I2C bus support" - depends on UNICORE32 && ARCH_PUV3 - select I2C_ALGOBIT - help - This driver supports the I2C IP inside the PKUnity-v3 SoC. - This I2C bus controller is under AMBA/AXI bus. - - This driver can also be built as a module. If so, the module - will be called i2c-puv3. - config I2C_PXA tristate "Intel PXA2XX I2C adapter" depends on ARCH_PXA || ARCH_MMP || ARCH_MVEBU || (X86_32 && PCI && OF) || COMPILE_TEST diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 306d5dc3f417..19aff0e45cb5 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -88,7 +88,6 @@ obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o obj-$(CONFIG_I2C_PNX) += i2c-pnx.o -obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o obj-$(CONFIG_I2C_PXA) += i2c-pxa.o obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o obj-$(CONFIG_I2C_QCOM_CCI) += i2c-qcom-cci.o diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index 4b72398af505..e4b7f2a951ad 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -421,20 +421,21 @@ static irqreturn_t cdns_i2c_master_isr(void *ptr) /* Read data if receive data valid is set */ while (cdns_i2c_readreg(CDNS_I2C_SR_OFFSET) & CDNS_I2C_SR_RXDV) { - /* - * Clear hold bit that was set for FIFO control if - * RX data left is less than FIFO depth, unless - * repeated start is selected. - */ - if ((id->recv_count < CDNS_I2C_FIFO_DEPTH) && - !id->bus_hold_flag) - cdns_i2c_clear_bus_hold(id); - if (id->recv_count > 0) { *(id->p_recv_buf)++ = cdns_i2c_readreg(CDNS_I2C_DATA_OFFSET); id->recv_count--; id->curr_recv_count--; + + /* + * Clear hold bit that was set for FIFO control + * if RX data left is less than or equal to + * FIFO DEPTH unless repeated start is selected + */ + if (id->recv_count <= CDNS_I2C_FIFO_DEPTH && + !id->bus_hold_flag) + cdns_i2c_clear_bus_hold(id); + } else { dev_err(id->adap.dev.parent, "xfer_size reg rollover. xfer aborted!\n"); @@ -594,10 +595,8 @@ static void cdns_i2c_mrecv(struct cdns_i2c *id) * Check for the message size against FIFO depth and set the * 'hold bus' bit if it is greater than FIFO depth. */ - if ((id->recv_count > CDNS_I2C_FIFO_DEPTH) || id->bus_hold_flag) + if (id->recv_count > CDNS_I2C_FIFO_DEPTH) ctrl_reg |= CDNS_I2C_CR_HOLD; - else - ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD; cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET); @@ -654,11 +653,8 @@ static void cdns_i2c_msend(struct cdns_i2c *id) * Check for the message size against FIFO depth and set the * 'hold bus' bit if it is greater than FIFO depth. */ - if ((id->send_count > CDNS_I2C_FIFO_DEPTH) || id->bus_hold_flag) + if (id->send_count > CDNS_I2C_FIFO_DEPTH) ctrl_reg |= CDNS_I2C_CR_HOLD; - else - ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD; - cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET); /* Clear the interrupts in interrupt status register. */ diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c index e3a8640db7da..3c19aada4b30 100644 --- a/drivers/i2c/busses/i2c-designware-common.c +++ b/drivers/i2c/busses/i2c-designware-common.c @@ -286,10 +286,8 @@ int i2c_dw_acpi_configure(struct device *device) } EXPORT_SYMBOL_GPL(i2c_dw_acpi_configure); -void i2c_dw_acpi_adjust_bus_speed(struct device *device) +static u32 i2c_dw_acpi_round_bus_speed(struct device *device) { - struct dw_i2c_dev *dev = dev_get_drvdata(device); - struct i2c_timings *t = &dev->timings; u32 acpi_speed; int i; @@ -300,9 +298,22 @@ void i2c_dw_acpi_adjust_bus_speed(struct device *device) */ for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) { if (acpi_speed >= supported_speeds[i]) - break; + return supported_speeds[i]; } - acpi_speed = i < ARRAY_SIZE(supported_speeds) ? supported_speeds[i] : 0; + + return 0; +} + +#else /* CONFIG_ACPI */ + +static inline u32 i2c_dw_acpi_round_bus_speed(struct device *device) { return 0; } + +#endif /* CONFIG_ACPI */ + +void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev) +{ + u32 acpi_speed = i2c_dw_acpi_round_bus_speed(dev->dev); + struct i2c_timings *t = &dev->timings; /* * Find bus speed from the "clock-frequency" device property, ACPI @@ -315,9 +326,7 @@ void i2c_dw_acpi_adjust_bus_speed(struct device *device) else t->bus_freq_hz = I2C_MAX_FAST_MODE_FREQ; } -EXPORT_SYMBOL_GPL(i2c_dw_acpi_adjust_bus_speed); - -#endif /* CONFIG_ACPI */ +EXPORT_SYMBOL_GPL(i2c_dw_adjust_bus_speed); u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset) { diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index 556673a1f61b..eb5ef4d0f463 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -361,11 +361,10 @@ static inline int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev) { return 0; #endif int i2c_dw_validate_speed(struct dw_i2c_dev *dev); +void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev); #if IS_ENABLED(CONFIG_ACPI) int i2c_dw_acpi_configure(struct device *device); -void i2c_dw_acpi_adjust_bus_speed(struct device *device); #else static inline int i2c_dw_acpi_configure(struct device *device) { return -ENODEV; } -static inline void i2c_dw_acpi_adjust_bus_speed(struct device *device) {} #endif diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index 947c096f86e3..8522134f9ea9 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -240,7 +240,7 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev, } } - i2c_dw_acpi_adjust_bus_speed(&pdev->dev); + i2c_dw_adjust_bus_speed(dev); if (has_acpi_companion(&pdev->dev)) i2c_dw_acpi_configure(&pdev->dev); diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 0de4e302fc6a..a71bc58fc03c 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -12,6 +12,7 @@ #include <linux/clk-provider.h> #include <linux/clk.h> #include <linux/delay.h> +#include <linux/dmi.h> #include <linux/err.h> #include <linux/errno.h> #include <linux/i2c.h> @@ -191,6 +192,17 @@ static int dw_i2c_plat_request_regs(struct dw_i2c_dev *dev) return ret; } +static const struct dmi_system_id dw_i2c_hwmon_class_dmi[] = { + { + .ident = "Qtechnology QT5222", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Qtechnology"), + DMI_MATCH(DMI_PRODUCT_NAME, "QT5222"), + }, + }, + { } /* terminate list */ +}; + static int dw_i2c_plat_probe(struct platform_device *pdev) { struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev); @@ -228,7 +240,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) else i2c_parse_fw_timings(&pdev->dev, t, false); - i2c_dw_acpi_adjust_bus_speed(&pdev->dev); + i2c_dw_adjust_bus_speed(dev); if (pdev->dev.of_node) dw_i2c_of_configure(pdev); @@ -267,7 +279,8 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) adap = &dev->adapter; adap->owner = THIS_MODULE; - adap->class = I2C_CLASS_DEPRECATED; + adap->class = dmi_check_system(dw_i2c_hwmon_class_dmi) ? + I2C_CLASS_HWMON : I2C_CLASS_DEPRECATED; ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev)); adap->dev.of_node = pdev->dev.of_node; adap->nr = -1; diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c index bb810dee8fb5..73f139690e4e 100644 --- a/drivers/i2c/busses/i2c-eg20t.c +++ b/drivers/i2c/busses/i2c-eg20t.c @@ -180,6 +180,7 @@ static const struct pci_device_id pch_pcidev_id[] = { { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7831_I2C), 1, }, {0,} }; +MODULE_DEVICE_TABLE(pci, pch_pcidev_id); static irqreturn_t pch_i2c_handler(int irq, void *pData); diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c index e0c256922d4f..977d6f524649 100644 --- a/drivers/i2c/busses/i2c-fsi.c +++ b/drivers/i2c/busses/i2c-fsi.c @@ -98,7 +98,7 @@ #define I2C_STAT_DAT_REQ BIT(25) #define I2C_STAT_CMD_COMP BIT(24) #define I2C_STAT_STOP_ERR BIT(23) -#define I2C_STAT_MAX_PORT GENMASK(19, 16) +#define I2C_STAT_MAX_PORT GENMASK(22, 16) #define I2C_STAT_ANY_INT BIT(15) #define I2C_STAT_SCL_IN BIT(11) #define I2C_STAT_SDA_IN BIT(10) diff --git a/drivers/i2c/busses/i2c-mlxcpld.c b/drivers/i2c/busses/i2c-mlxcpld.c index 2fd717d8dd30..71d7bae2cbca 100644 --- a/drivers/i2c/busses/i2c-mlxcpld.c +++ b/drivers/i2c/busses/i2c-mlxcpld.c @@ -337,9 +337,9 @@ static int mlxcpld_i2c_wait_for_tc(struct mlxcpld_i2c_priv *priv) if (priv->smbus_block && (val & MLXCPLD_I2C_SMBUS_BLK_BIT)) { mlxcpld_i2c_read_comm(priv, MLXCPLD_LPCI2C_NUM_DAT_REG, &datalen, 1); - if (unlikely(datalen > (I2C_SMBUS_BLOCK_MAX + 1))) { + if (unlikely(datalen > I2C_SMBUS_BLOCK_MAX)) { dev_err(priv->dev, "Incorrect smbus block read message len\n"); - return -E2BIG; + return -EPROTO; } } else { datalen = priv->xfer.data_len; diff --git a/drivers/i2c/busses/i2c-puv3.c b/drivers/i2c/busses/i2c-puv3.c deleted file mode 100644 index 5cec5a36807d..000000000000 --- a/drivers/i2c/busses/i2c-puv3.c +++ /dev/null @@ -1,275 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * I2C driver for PKUnity-v3 SoC - * Code specific to PKUnity SoC and UniCore ISA - * - * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn> - * Copyright (C) 2001-2010 Guan Xuetao - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/slab.h> -#include <linux/types.h> -#include <linux/delay.h> -#include <linux/i2c.h> -#include <linux/clk.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <mach/hardware.h> - -/* - * Poll the i2c status register until the specified bit is set. - * Returns 0 if timed out (100 msec). - */ -static short poll_status(unsigned long bit) -{ - int loop_cntr = 1000; - - if (bit & I2C_STATUS_TFNF) { - do { - udelay(10); - } while (!(readl(I2C_STATUS) & bit) && (--loop_cntr > 0)); - } else { - /* RXRDY handler */ - do { - if (readl(I2C_TAR) == I2C_TAR_EEPROM) - msleep(20); - else - udelay(10); - } while (!(readl(I2C_RXFLR) & 0xf) && (--loop_cntr > 0)); - } - - return (loop_cntr > 0); -} - -static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length) -{ - int i2c_reg = *buf; - - /* Read data */ - while (length--) { - if (!poll_status(I2C_STATUS_TFNF)) { - dev_dbg(&adap->dev, "Tx FIFO Not Full timeout\n"); - return -ETIMEDOUT; - } - - /* send addr */ - writel(i2c_reg | I2C_DATACMD_WRITE, I2C_DATACMD); - - /* get ready to next write */ - i2c_reg++; - - /* send read CMD */ - writel(I2C_DATACMD_READ, I2C_DATACMD); - - /* wait until the Rx FIFO have available */ - if (!poll_status(I2C_STATUS_RFNE)) { - dev_dbg(&adap->dev, "RXRDY timeout\n"); - return -ETIMEDOUT; - } - - /* read the data to buf */ - *buf = (readl(I2C_DATACMD) & I2C_DATACMD_DAT_MASK); - buf++; - } - - return 0; -} - -static int xfer_write(struct i2c_adapter *adap, unsigned char *buf, int length) -{ - int i2c_reg = *buf; - - /* Do nothing but storing the reg_num to a static variable */ - if (i2c_reg == -1) { - printk(KERN_WARNING "Error i2c reg\n"); - return -ETIMEDOUT; - } - - if (length == 1) - return 0; - - buf++; - length--; - while (length--) { - /* send addr */ - writel(i2c_reg | I2C_DATACMD_WRITE, I2C_DATACMD); - - /* send write CMD */ - writel(*buf | I2C_DATACMD_WRITE, I2C_DATACMD); - - /* wait until the Rx FIFO have available */ - msleep(20); - - /* read the data to buf */ - i2c_reg++; - buf++; - } - - return 0; -} - -/* - * Generic i2c master transfer entrypoint. - * - */ -static int puv3_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg, - int num) -{ - int i, ret; - unsigned char swap; - - /* Disable i2c */ - writel(I2C_ENABLE_DISABLE, I2C_ENABLE); - - /* Set the work mode and speed*/ - writel(I2C_CON_MASTER | I2C_CON_SPEED_STD | I2C_CON_SLAVEDISABLE, I2C_CON); - - writel(pmsg->addr, I2C_TAR); - - /* Enable i2c */ - writel(I2C_ENABLE_ENABLE, I2C_ENABLE); - - dev_dbg(&adap->dev, "puv3_i2c_xfer: processing %d messages:\n", num); - - for (i = 0; i < num; i++) { - dev_dbg(&adap->dev, " #%d: %sing %d byte%s %s 0x%02x\n", i, - pmsg->flags & I2C_M_RD ? "read" : "writ", - pmsg->len, pmsg->len > 1 ? "s" : "", - pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr); - - if (pmsg->len && pmsg->buf) { /* sanity check */ - if (pmsg->flags & I2C_M_RD) - ret = xfer_read(adap, pmsg->buf, pmsg->len); - else - ret = xfer_write(adap, pmsg->buf, pmsg->len); - - if (ret) - return ret; - - } - dev_dbg(&adap->dev, "transfer complete\n"); - pmsg++; /* next message */ - } - - /* XXX: fixup be16_to_cpu in bq27x00_battery.c */ - if (pmsg->addr == I2C_TAR_PWIC) { - swap = pmsg->buf[0]; - pmsg->buf[0] = pmsg->buf[1]; - pmsg->buf[1] = swap; - } - - return i; -} - -/* - * Return list of supported functionality. - */ -static u32 puv3_i2c_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; -} - -static const struct i2c_algorithm puv3_i2c_algorithm = { - .master_xfer = puv3_i2c_xfer, - .functionality = puv3_i2c_func, -}; - -/* - * Main initialization routine. - */ -static int puv3_i2c_probe(struct platform_device *pdev) -{ - struct i2c_adapter *adapter; - struct resource *mem; - int rc; - - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) - return -ENODEV; - - if (!request_mem_region(mem->start, resource_size(mem), "puv3_i2c")) - return -EBUSY; - - adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL); - if (adapter == NULL) { - dev_err(&pdev->dev, "can't allocate interface!\n"); - rc = -ENOMEM; - goto fail_nomem; - } - snprintf(adapter->name, sizeof(adapter->name), "PUV3-I2C at 0x%08x", - mem->start); - adapter->algo = &puv3_i2c_algorithm; - adapter->class = I2C_CLASS_HWMON; - adapter->dev.parent = &pdev->dev; - - platform_set_drvdata(pdev, adapter); - - adapter->nr = pdev->id; - rc = i2c_add_numbered_adapter(adapter); - if (rc) - goto fail_add_adapter; - - dev_info(&pdev->dev, "PKUnity v3 i2c bus adapter.\n"); - return 0; - -fail_add_adapter: - kfree(adapter); -fail_nomem: - release_mem_region(mem->start, resource_size(mem)); - - return rc; -} - -static int puv3_i2c_remove(struct platform_device *pdev) -{ - struct i2c_adapter *adapter = platform_get_drvdata(pdev); - struct resource *mem; - - i2c_del_adapter(adapter); - - put_device(&pdev->dev); - - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(mem->start, resource_size(mem)); - - return 0; -} - -#ifdef CONFIG_PM_SLEEP -static int puv3_i2c_suspend(struct device *dev) -{ - int poll_count; - /* Disable the IIC */ - writel(I2C_ENABLE_DISABLE, I2C_ENABLE); - for (poll_count = 0; poll_count < 50; poll_count++) { - if (readl(I2C_ENSTATUS) & I2C_ENSTATUS_ENABLE) - udelay(25); - } - - return 0; -} - -static SIMPLE_DEV_PM_OPS(puv3_i2c_pm, puv3_i2c_suspend, NULL); -#define PUV3_I2C_PM (&puv3_i2c_pm) - -#else -#define PUV3_I2C_PM NULL -#endif - -static struct platform_driver puv3_i2c_driver = { - .probe = puv3_i2c_probe, - .remove = puv3_i2c_remove, - .driver = { - .name = "PKUnity-v3-I2C", - .pm = PUV3_I2C_PM, - } -}; - -module_platform_driver(puv3_i2c_driver); - -MODULE_DESCRIPTION("PKUnity v3 I2C driver"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:puv3_i2c"); diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c index 32b2a9921b14..dead5db3315a 100644 --- a/drivers/i2c/busses/i2c-qcom-geni.c +++ b/drivers/i2c/busses/i2c-qcom-geni.c @@ -367,7 +367,6 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg, geni_se_select_mode(se, GENI_SE_FIFO); writel_relaxed(len, se->base + SE_I2C_RX_TRANS_LEN); - geni_se_setup_m_cmd(se, I2C_READ, m_param); if (dma_buf && geni_se_rx_dma_prep(se, dma_buf, len, &rx_dma)) { geni_se_select_mode(se, GENI_SE_FIFO); @@ -375,6 +374,8 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg, dma_buf = NULL; } + geni_se_setup_m_cmd(se, I2C_READ, m_param); + time_left = wait_for_completion_timeout(&gi2c->done, XFER_TIMEOUT); if (!time_left) geni_i2c_abort_xfer(gi2c); @@ -408,7 +409,6 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg, geni_se_select_mode(se, GENI_SE_FIFO); writel_relaxed(len, se->base + SE_I2C_TX_TRANS_LEN); - geni_se_setup_m_cmd(se, I2C_WRITE, m_param); if (dma_buf && geni_se_tx_dma_prep(se, dma_buf, len, &tx_dma)) { geni_se_select_mode(se, GENI_SE_FIFO); @@ -416,6 +416,8 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg, dma_buf = NULL; } + geni_se_setup_m_cmd(se, I2C_WRITE, m_param); + if (!dma_buf) /* Get FIFO IRQ */ writel_relaxed(1, se->base + SE_GENI_TX_WATERMARK_REG); diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index a45c4bf1ec01..2e3e1bb75013 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -868,6 +868,7 @@ static int rcar_unreg_slave(struct i2c_client *slave) /* disable irqs and ensure none is running before clearing ptr */ rcar_i2c_write(priv, ICSIER, 0); rcar_i2c_write(priv, ICSCR, 0); + rcar_i2c_write(priv, ICSAR, 0); /* Gen2: must be 0 if not using slave */ synchronize_irq(priv->irq); priv->slave = NULL; @@ -969,6 +970,8 @@ static int rcar_i2c_probe(struct platform_device *pdev) if (ret < 0) goto out_pm_put; + rcar_i2c_write(priv, ICSAR, 0); /* Gen2: must be 0 if not using slave */ + if (priv->devtype == I2C_RCAR_GEN3) { priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); if (!IS_ERR(priv->rstc)) { |