diff options
Diffstat (limited to 'drivers/i2c/busses')
32 files changed, 769 insertions, 1262 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index c94db1c5e353..620d1004a1e7 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -449,7 +449,7 @@ config I2C_EFM32 config I2C_EG20T tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) I2C" - depends on PCI + depends on PCI && (X86_32 || COMPILE_TEST) help This driver is for PCH(Platform controller Hub) I2C of EG20T which is an IOH(Input/Output Hub) for x86 embedded processor. @@ -570,13 +570,6 @@ config I2C_NOMADIK I2C interface from ST-Ericsson's Nomadik and Ux500 architectures, as well as the STA2X11 PCIe I/O HUB. -config I2C_NUC900 - tristate "NUC900 I2C Driver" - depends on ARCH_W90X900 - help - Say Y here to include support for I2C controller in the - Winbond/Nuvoton NUC900 based System-on-Chip devices. - config I2C_OCORES tristate "OpenCores I2C Controller" help @@ -993,6 +986,15 @@ config I2C_SIBYTE help Supports the SiByte SOC on-chip I2C interfaces (2 channels). +config I2C_CROS_EC_TUNNEL + tristate "ChromeOS EC tunnel I2C bus" + depends on MFD_CROS_EC + help + If you say yes here you get an I2C bus that will tunnel i2c commands + through to the other side of the ChromeOS EC to the i2c bus + connected there. This will work whatever the interface used to + talk to the EC (SPI, I2C or LPC). + config SCx200_I2C tristate "NatSemi SCx200 I2C using GPIO pins (DEPRECATED)" depends on SCx200_GPIO diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 18d18ff9db93..298692cc6000 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -55,7 +55,6 @@ obj-$(CONFIG_I2C_MPC) += i2c-mpc.o obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o obj-$(CONFIG_I2C_MXS) += i2c-mxs.o obj-$(CONFIG_I2C_NOMADIK) += i2c-nomadik.o -obj-$(CONFIG_I2C_NUC900) += i2c-nuc900.o obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o obj-$(CONFIG_I2C_OMAP) += i2c-omap.o obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o @@ -95,6 +94,7 @@ obj-$(CONFIG_I2C_VIPERBOARD) += i2c-viperboard.o # Other I2C/SMBus bus drivers obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o obj-$(CONFIG_I2C_BCM_KONA) += i2c-bcm-kona.o +obj-$(CONFIG_I2C_CROS_EC_TUNNEL) += i2c-cros-ec-tunnel.o obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 98a1c97739ba..15517d78d5ff 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -63,7 +63,7 @@ static struct pci_driver ali1563_pci_driver; static unsigned short ali1563_smba; -static int ali1563_transaction(struct i2c_adapter * a, int size) +static int ali1563_transaction(struct i2c_adapter *a, int size) { u32 data; int timeout; @@ -78,7 +78,7 @@ static int ali1563_transaction(struct i2c_adapter * a, int size) data = inb_p(SMB_HST_STS); if (data & HST_STS_BAD) { dev_err(&a->dev, "ali1563: Trying to reset busy device\n"); - outb_p(data | HST_STS_BAD,SMB_HST_STS); + outb_p(data | HST_STS_BAD, SMB_HST_STS); data = inb_p(SMB_HST_STS); if (data & HST_STS_BAD) return -EBUSY; @@ -102,10 +102,10 @@ static int ali1563_transaction(struct i2c_adapter * a, int size) if (!timeout) { dev_err(&a->dev, "Timeout - Trying to KILL transaction!\n"); /* Issue 'kill' to host controller */ - outb_p(HST_CNTL2_KILL,SMB_HST_CNTL2); + outb_p(HST_CNTL2_KILL, SMB_HST_CNTL2); data = inb_p(SMB_HST_STS); status = -ETIMEDOUT; - } + } /* device error - no response, ignore the autodetection case */ if (data & HST_STS_DEVERR) { @@ -117,18 +117,18 @@ static int ali1563_transaction(struct i2c_adapter * a, int size) if (data & HST_STS_BUSERR) { dev_err(&a->dev, "Bus collision!\n"); /* Issue timeout, hoping it helps */ - outb_p(HST_CNTL1_TIMEOUT,SMB_HST_CNTL1); + outb_p(HST_CNTL1_TIMEOUT, SMB_HST_CNTL1); } if (data & HST_STS_FAIL) { dev_err(&a->dev, "Cleaning fail after KILL!\n"); - outb_p(0x0,SMB_HST_CNTL2); + outb_p(0x0, SMB_HST_CNTL2); } return status; } -static int ali1563_block_start(struct i2c_adapter * a) +static int ali1563_block_start(struct i2c_adapter *a) { u32 data; int timeout; @@ -142,8 +142,8 @@ static int ali1563_block_start(struct i2c_adapter * a) data = inb_p(SMB_HST_STS); if (data & HST_STS_BAD) { - dev_warn(&a->dev,"ali1563: Trying to reset busy device\n"); - outb_p(data | HST_STS_BAD,SMB_HST_STS); + dev_warn(&a->dev, "ali1563: Trying to reset busy device\n"); + outb_p(data | HST_STS_BAD, SMB_HST_STS); data = inb_p(SMB_HST_STS); if (data & HST_STS_BAD) return -EBUSY; @@ -184,13 +184,14 @@ static int ali1563_block_start(struct i2c_adapter * a) return status; } -static int ali1563_block(struct i2c_adapter * a, union i2c_smbus_data * data, u8 rw) +static int ali1563_block(struct i2c_adapter *a, + union i2c_smbus_data *data, u8 rw) { int i, len; int error = 0; /* Do we need this? */ - outb_p(HST_CNTL1_LAST,SMB_HST_CNTL1); + outb_p(HST_CNTL1_LAST, SMB_HST_CNTL1); if (rw == I2C_SMBUS_WRITE) { len = data->block[0]; @@ -198,8 +199,8 @@ static int ali1563_block(struct i2c_adapter * a, union i2c_smbus_data * data, u8 len = 1; else if (len > 32) len = 32; - outb_p(len,SMB_HST_DAT0); - outb_p(data->block[1],SMB_BLK_DAT); + outb_p(len, SMB_HST_DAT0); + outb_p(data->block[1], SMB_BLK_DAT); } else len = 32; @@ -208,10 +209,12 @@ static int ali1563_block(struct i2c_adapter * a, union i2c_smbus_data * data, u8 for (i = 0; i < len; i++) { if (rw == I2C_SMBUS_WRITE) { outb_p(data->block[i + 1], SMB_BLK_DAT); - if ((error = ali1563_block_start(a))) + error = ali1563_block_start(a); + if (error) break; } else { - if ((error = ali1563_block_start(a))) + error = ali1563_block_start(a); + if (error) break; if (i == 0) { len = inb_p(SMB_HST_DAT0); @@ -224,25 +227,26 @@ static int ali1563_block(struct i2c_adapter * a, union i2c_smbus_data * data, u8 } } /* Do we need this? */ - outb_p(HST_CNTL1_LAST,SMB_HST_CNTL1); + outb_p(HST_CNTL1_LAST, SMB_HST_CNTL1); return error; } -static s32 ali1563_access(struct i2c_adapter * a, u16 addr, +static s32 ali1563_access(struct i2c_adapter *a, u16 addr, unsigned short flags, char rw, u8 cmd, - int size, union i2c_smbus_data * data) + int size, union i2c_smbus_data *data) { int error = 0; int timeout; u32 reg; for (timeout = ALI1563_MAX_TIMEOUT; timeout; timeout--) { - if (!(reg = inb_p(SMB_HST_STS) & HST_STS_BUSY)) + reg = inb_p(SMB_HST_STS); + if (!(reg & HST_STS_BUSY)) break; } if (!timeout) - dev_warn(&a->dev,"SMBus not idle. HST_STS = %02x\n",reg); - outb_p(0xff,SMB_HST_STS); + dev_warn(&a->dev, "SMBus not idle. HST_STS = %02x\n", reg); + outb_p(0xff, SMB_HST_STS); /* Map the size to what the chip understands */ switch (size) { @@ -268,13 +272,14 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr, } outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD); - outb_p((inb_p(SMB_HST_CNTL2) & ~HST_CNTL2_SIZEMASK) | (size << 3), SMB_HST_CNTL2); + outb_p((inb_p(SMB_HST_CNTL2) & ~HST_CNTL2_SIZEMASK) | + (size << 3), SMB_HST_CNTL2); /* Write the command register */ - switch(size) { + switch (size) { case HST_CNTL2_BYTE: - if (rw== I2C_SMBUS_WRITE) + if (rw == I2C_SMBUS_WRITE) /* Beware it uses DAT0 register and not CMD! */ outb_p(cmd, SMB_HST_DAT0); break; @@ -292,11 +297,12 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr, break; case HST_CNTL2_BLOCK: outb_p(cmd, SMB_HST_CMD); - error = ali1563_block(a,data,rw); + error = ali1563_block(a, data, rw); goto Done; } - if ((error = ali1563_transaction(a, size))) + error = ali1563_transaction(a, size); + if (error) goto Done; if ((rw == I2C_SMBUS_WRITE) || (size == HST_CNTL2_QUICK)) @@ -317,7 +323,7 @@ Done: return error; } -static u32 ali1563_func(struct i2c_adapter * a) +static u32 ali1563_func(struct i2c_adapter *a) { return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | @@ -329,13 +335,13 @@ static int ali1563_setup(struct pci_dev *dev) { u16 ctrl; - pci_read_config_word(dev,ALI1563_SMBBA,&ctrl); + pci_read_config_word(dev, ALI1563_SMBBA, &ctrl); /* SMB I/O Base in high 12 bits and must be aligned with the * size of the I/O space. */ ali1563_smba = ctrl & ~(ALI1563_SMB_IOSIZE - 1); if (!ali1563_smba) { - dev_warn(&dev->dev,"ali1563_smba Uninitialized\n"); + dev_warn(&dev->dev, "ali1563_smba Uninitialized\n"); goto Err; } @@ -350,8 +356,8 @@ static int ali1563_setup(struct pci_dev *dev) ctrl | ALI1563_SMB_IOEN); pci_read_config_word(dev, ALI1563_SMBBA, &ctrl); if (!(ctrl & ALI1563_SMB_IOEN)) { - dev_err(&dev->dev, "I/O space still not enabled, " - "giving up\n"); + dev_err(&dev->dev, + "I/O space still not enabled, giving up\n"); goto Err; } } @@ -375,7 +381,7 @@ Err: static void ali1563_shutdown(struct pci_dev *dev) { - release_region(ali1563_smba,ALI1563_SMB_IOSIZE); + release_region(ali1563_smba, ALI1563_SMB_IOSIZE); } static const struct i2c_algorithm ali1563_algorithm = { @@ -394,12 +400,14 @@ static int ali1563_probe(struct pci_dev *dev, { int error; - if ((error = ali1563_setup(dev))) + error = ali1563_setup(dev); + if (error) goto exit; ali1563_adapter.dev.parent = &dev->dev; snprintf(ali1563_adapter.name, sizeof(ali1563_adapter.name), "SMBus ALi 1563 Adapter @ %04x", ali1563_smba); - if ((error = i2c_add_adapter(&ali1563_adapter))) + error = i2c_add_adapter(&ali1563_adapter); + if (error) goto exit_shutdown; return 0; @@ -421,12 +429,12 @@ static const struct pci_device_id ali1563_id_table[] = { {}, }; -MODULE_DEVICE_TABLE (pci, ali1563_id_table); +MODULE_DEVICE_TABLE(pci, ali1563_id_table); static struct pci_driver ali1563_pci_driver = { - .name = "ali1563_smbus", + .name = "ali1563_smbus", .id_table = ali1563_id_table, - .probe = ali1563_probe, + .probe = ali1563_probe, .remove = ali1563_remove, }; diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c index c60719577fc3..214ff9700efe 100644 --- a/drivers/i2c/busses/i2c-bcm2835.c +++ b/drivers/i2c/busses/i2c-bcm2835.c @@ -225,10 +225,8 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) struct i2c_adapter *adap; i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL); - if (!i2c_dev) { - dev_err(&pdev->dev, "Cannot allocate i2c_dev\n"); + if (!i2c_dev) return -ENOMEM; - } platform_set_drvdata(pdev, i2c_dev); i2c_dev->dev = &pdev->dev; init_completion(&i2c_dev->completion); diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c index e6d5162b6379..3e271e7558d3 100644 --- a/drivers/i2c/busses/i2c-bfin-twi.c +++ b/drivers/i2c/busses/i2c-bfin-twi.c @@ -620,35 +620,27 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) int rc; unsigned int clkhilow; - iface = kzalloc(sizeof(struct bfin_twi_iface), GFP_KERNEL); + iface = devm_kzalloc(&pdev->dev, sizeof(struct bfin_twi_iface), + GFP_KERNEL); if (!iface) { dev_err(&pdev->dev, "Cannot allocate memory\n"); - rc = -ENOMEM; - goto out_error_nomem; + return -ENOMEM; } spin_lock_init(&(iface->lock)); /* Find and map our resources */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); - rc = -ENOENT; - goto out_error_get_res; - } - - iface->regs_base = ioremap(res->start, resource_size(res)); - if (iface->regs_base == NULL) { + iface->regs_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(iface->regs_base)) { dev_err(&pdev->dev, "Cannot map IO\n"); - rc = -ENXIO; - goto out_error_ioremap; + return PTR_ERR(iface->regs_base); } iface->irq = platform_get_irq(pdev, 0); if (iface->irq < 0) { dev_err(&pdev->dev, "No IRQ specified\n"); - rc = -ENOENT; - goto out_error_no_irq; + return -ENOENT; } p_adap = &iface->adap; @@ -666,15 +658,15 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) "i2c-bfin-twi"); if (rc) { dev_err(&pdev->dev, "Can't setup pin mux!\n"); - goto out_error_pin_mux; + return -EBUSY; } - rc = request_irq(iface->irq, bfin_twi_interrupt_entry, + rc = devm_request_irq(&pdev->dev, iface->irq, bfin_twi_interrupt_entry, 0, pdev->name, iface); if (rc) { dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq); rc = -ENODEV; - goto out_error_req_irq; + goto out_error; } /* Set TWI internal clock as 10MHz */ @@ -695,7 +687,7 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) rc = i2c_add_numbered_adapter(p_adap); if (rc < 0) { dev_err(&pdev->dev, "Can't add i2c adapter!\n"); - goto out_error_add_adapter; + goto out_error; } platform_set_drvdata(pdev, iface); @@ -705,17 +697,8 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) return 0; -out_error_add_adapter: - free_irq(iface->irq, iface); -out_error_req_irq: -out_error_no_irq: +out_error: peripheral_free_list(dev_get_platdata(&pdev->dev)); -out_error_pin_mux: - iounmap(iface->regs_base); -out_error_ioremap: -out_error_get_res: - kfree(iface); -out_error_nomem: return rc; } @@ -724,10 +707,7 @@ static int i2c_bfin_twi_remove(struct platform_device *pdev) struct bfin_twi_iface *iface = platform_get_drvdata(pdev); i2c_del_adapter(&(iface->adap)); - free_irq(iface->irq, iface); peripheral_free_list(dev_get_platdata(&pdev->dev)); - iounmap(iface->regs_base); - kfree(iface); return 0; } diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c new file mode 100644 index 000000000000..8e7a71487bb1 --- /dev/null +++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c @@ -0,0 +1,318 @@ +/* + * Copyright (C) 2013 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Expose an I2C passthrough to the ChromeOS EC. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/mfd/cros_ec.h> +#include <linux/mfd/cros_ec_commands.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +/** + * struct ec_i2c_device - Driver data for I2C tunnel + * + * @dev: Device node + * @adap: I2C adapter + * @ec: Pointer to EC device + * @remote_bus: The EC bus number we tunnel to on the other side. + * @request_buf: Buffer for transmitting data; we expect most transfers to fit. + * @response_buf: Buffer for receiving data; we expect most transfers to fit. + */ + +struct ec_i2c_device { + struct device *dev; + struct i2c_adapter adap; + struct cros_ec_device *ec; + + u16 remote_bus; + + u8 request_buf[256]; + u8 response_buf[256]; +}; + +/** + * ec_i2c_count_message - Count bytes needed for ec_i2c_construct_message + * + * @i2c_msgs: The i2c messages to read + * @num: The number of i2c messages. + * + * Returns the number of bytes the messages will take up. + */ +static int ec_i2c_count_message(const struct i2c_msg i2c_msgs[], int num) +{ + int i; + int size; + + size = sizeof(struct ec_params_i2c_passthru); + size += num * sizeof(struct ec_params_i2c_passthru_msg); + for (i = 0; i < num; i++) + if (!(i2c_msgs[i].flags & I2C_M_RD)) + size += i2c_msgs[i].len; + + return size; +} + +/** + * ec_i2c_construct_message - construct a message to go to the EC + * + * This function effectively stuffs the standard i2c_msg format of Linux into + * a format that the EC understands. + * + * @buf: The buffer to fill. We assume that the buffer is big enough. + * @i2c_msgs: The i2c messages to read. + * @num: The number of i2c messages. + * @bus_num: The remote bus number we want to talk to. + * + * Returns 0 or a negative error number. + */ +static int ec_i2c_construct_message(u8 *buf, const struct i2c_msg i2c_msgs[], + int num, u16 bus_num) +{ + struct ec_params_i2c_passthru *params; + u8 *out_data; + int i; + + out_data = buf + sizeof(struct ec_params_i2c_passthru) + + num * sizeof(struct ec_params_i2c_passthru_msg); + + params = (struct ec_params_i2c_passthru *)buf; + params->port = bus_num; + params->num_msgs = num; + for (i = 0; i < num; i++) { + const struct i2c_msg *i2c_msg = &i2c_msgs[i]; + struct ec_params_i2c_passthru_msg *msg = ¶ms->msg[i]; + + msg->len = i2c_msg->len; + msg->addr_flags = i2c_msg->addr; + + if (i2c_msg->flags & I2C_M_TEN) + msg->addr_flags |= EC_I2C_FLAG_10BIT; + + if (i2c_msg->flags & I2C_M_RD) { + msg->addr_flags |= EC_I2C_FLAG_READ; + } else { + memcpy(out_data, i2c_msg->buf, msg->len); + out_data += msg->len; + } + } + + return 0; +} + +/** + * ec_i2c_count_response - Count bytes needed for ec_i2c_parse_response + * + * @i2c_msgs: The i2c messages to to fill up. + * @num: The number of i2c messages expected. + * + * Returns the number of response bytes expeced. + */ +static int ec_i2c_count_response(struct i2c_msg i2c_msgs[], int num) +{ + int size; + int i; + + size = sizeof(struct ec_response_i2c_passthru); + for (i = 0; i < num; i++) + if (i2c_msgs[i].flags & I2C_M_RD) + size += i2c_msgs[i].len; + + return size; +} + +/** + * ec_i2c_parse_response - Parse a response from the EC + * + * We'll take the EC's response and copy it back into msgs. + * + * @buf: The buffer to parse. + * @i2c_msgs: The i2c messages to to fill up. + * @num: The number of i2c messages; will be modified to include the actual + * number received. + * + * Returns 0 or a negative error number. + */ +static int ec_i2c_parse_response(const u8 *buf, struct i2c_msg i2c_msgs[], + int *num) +{ + const struct ec_response_i2c_passthru *resp; + const u8 *in_data; + int i; + + in_data = buf + sizeof(struct ec_response_i2c_passthru); + + resp = (const struct ec_response_i2c_passthru *)buf; + if (resp->i2c_status & EC_I2C_STATUS_TIMEOUT) + return -ETIMEDOUT; + else if (resp->i2c_status & EC_I2C_STATUS_ERROR) + return -EREMOTEIO; + + /* Other side could send us back fewer messages, but not more */ + if (resp->num_msgs > *num) + return -EPROTO; + *num = resp->num_msgs; + + for (i = 0; i < *num; i++) { + struct i2c_msg *i2c_msg = &i2c_msgs[i]; + + if (i2c_msgs[i].flags & I2C_M_RD) { + memcpy(i2c_msg->buf, in_data, i2c_msg->len); + in_data += i2c_msg->len; + } + } + + return 0; +} + +static int ec_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg i2c_msgs[], + int num) +{ + struct ec_i2c_device *bus = adap->algo_data; + struct device *dev = bus->dev; + const u16 bus_num = bus->remote_bus; + int request_len; + int response_len; + u8 *request = NULL; + u8 *response = NULL; + int result; + + request_len = ec_i2c_count_message(i2c_msgs, num); + if (request_len < 0) { + dev_warn(dev, "Error constructing message %d\n", request_len); + result = request_len; + goto exit; + } + response_len = ec_i2c_count_response(i2c_msgs, num); + if (response_len < 0) { + /* Unexpected; no errors should come when NULL response */ + dev_warn(dev, "Error preparing response %d\n", response_len); + result = response_len; + goto exit; + } + + if (request_len <= ARRAY_SIZE(bus->request_buf)) { + request = bus->request_buf; + } else { + request = kzalloc(request_len, GFP_KERNEL); + if (request == NULL) { + result = -ENOMEM; + goto exit; + } + } + if (response_len <= ARRAY_SIZE(bus->response_buf)) { + response = bus->response_buf; + } else { + response = kzalloc(response_len, GFP_KERNEL); + if (response == NULL) { + result = -ENOMEM; + goto exit; + } + } + + ec_i2c_construct_message(request, i2c_msgs, num, bus_num); + result = bus->ec->command_sendrecv(bus->ec, EC_CMD_I2C_PASSTHRU, + request, request_len, + response, response_len); + if (result) + goto exit; + + result = ec_i2c_parse_response(response, i2c_msgs, &num); + if (result < 0) + goto exit; + + /* Indicate success by saying how many messages were sent */ + result = num; +exit: + if (request != bus->request_buf) + kfree(request); + if (response != bus->response_buf) + kfree(response); + + return result; +} + +static u32 ec_i2c_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static const struct i2c_algorithm ec_i2c_algorithm = { + .master_xfer = ec_i2c_xfer, + .functionality = ec_i2c_functionality, +}; + +static int ec_i2c_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent); + struct device *dev = &pdev->dev; + struct ec_i2c_device *bus = NULL; + u32 remote_bus; + int err; + + if (!ec->command_sendrecv) { + dev_err(dev, "Missing sendrecv\n"); + return -EINVAL; + } + + bus = devm_kzalloc(dev, sizeof(*bus), GFP_KERNEL); + if (bus == NULL) + return -ENOMEM; + + err = of_property_read_u32(np, "google,remote-bus", &remote_bus); + if (err) { + dev_err(dev, "Couldn't read remote-bus property\n"); + return err; + } + bus->remote_bus = remote_bus; + + bus->ec = ec; + bus->dev = dev; + + bus->adap.owner = THIS_MODULE; + strlcpy(bus->adap.name, "cros-ec-i2c-tunnel", sizeof(bus->adap.name)); + bus->adap.algo = &ec_i2c_algorithm; + bus->adap.algo_data = bus; + bus->adap.dev.parent = &pdev->dev; + bus->adap.dev.of_node = np; + + err = i2c_add_adapter(&bus->adap); + if (err) { + dev_err(dev, "cannot register i2c adapter\n"); + return err; + } + platform_set_drvdata(pdev, bus); + + return err; +} + +static int ec_i2c_remove(struct platform_device *dev) +{ + struct ec_i2c_device *bus = platform_get_drvdata(dev); + + i2c_del_adapter(&bus->adap); + + return 0; +} + +static struct platform_driver ec_i2c_tunnel_driver = { + .probe = ec_i2c_probe, + .remove = ec_i2c_remove, + .driver = { + .name = "cros-ec-i2c-tunnel", + }, +}; + +module_platform_driver(ec_i2c_tunnel_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("EC I2C tunnel driver"); +MODULE_ALIAS("platform:cros-ec-i2c-tunnel"); diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index 85056c22d21e..3356f7ab9f79 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -56,6 +56,7 @@ enum dw_pci_ctl_id_t { medfield_5, baytrail, + haswell, }; struct dw_scl_sda_cfg { @@ -95,6 +96,15 @@ static struct dw_scl_sda_cfg byt_config = { .sda_hold = 0x6, }; +/* Haswell HCNT/LCNT/SDA hold time */ +static struct dw_scl_sda_cfg hsw_config = { + .ss_hcnt = 0x01b0, + .fs_hcnt = 0x48, + .ss_lcnt = 0x01fb, + .fs_lcnt = 0xa0, + .sda_hold = 0x9, +}; + static struct dw_pci_controller dw_pci_controllers[] = { [moorestown_0] = { .bus_num = 0, @@ -168,6 +178,15 @@ static struct dw_pci_controller dw_pci_controllers[] = { .functionality = I2C_FUNC_10BIT_ADDR, .scl_sda_cfg = &byt_config, }, + [haswell] = { + .bus_num = -1, + .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, + .tx_fifo_depth = 32, + .rx_fifo_depth = 32, + .clk_khz = 100000, + .functionality = I2C_FUNC_10BIT_ADDR, + .scl_sda_cfg = &hsw_config, + }, }; static struct i2c_algorithm i2c_dw_algo = { .master_xfer = i2c_dw_xfer, @@ -328,6 +347,9 @@ static const struct pci_device_id i2_designware_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x0F45), baytrail }, { PCI_VDEVICE(INTEL, 0x0F46), baytrail }, { PCI_VDEVICE(INTEL, 0x0F47), baytrail }, + /* Haswell */ + { PCI_VDEVICE(INTEL, 0x9c61), haswell }, + { PCI_VDEVICE(INTEL, 0x9c62), haswell }, { 0,} }; MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids); diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 9c7802614342..402ec3970fed 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -247,12 +247,13 @@ static const struct of_device_id dw_i2c_of_match[] = { MODULE_DEVICE_TABLE(of, dw_i2c_of_match); #endif -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_PM static int dw_i2c_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev); + i2c_dw_disable(i_dev); clk_disable_unprepare(i_dev->clk); return 0; @@ -268,13 +269,11 @@ static int dw_i2c_resume(struct device *dev) return 0; } - -static SIMPLE_DEV_PM_OPS(dw_i2c_dev_pm_ops, dw_i2c_suspend, dw_i2c_resume); -#define DW_I2C_DEV_PM_OPS (&dw_i2c_dev_pm_ops) -#else -#define DW_I2C_DEV_PM_OPS NULL #endif +static UNIVERSAL_DEV_PM_OPS(dw_i2c_dev_pm_ops, dw_i2c_suspend, + dw_i2c_resume, NULL); + /* work with hotplug and coldplug */ MODULE_ALIAS("platform:i2c_designware"); @@ -286,7 +285,7 @@ static struct platform_driver dw_i2c_driver = { .owner = THIS_MODULE, .of_match_table = of_match_ptr(dw_i2c_of_match), .acpi_match_table = ACPI_PTR(dw_i2c_acpi_match), - .pm = DW_I2C_DEV_PM_OPS, + .pm = &dw_i2c_dev_pm_ops, }, }; diff --git a/drivers/i2c/busses/i2c-diolan-u2c.c b/drivers/i2c/busses/i2c-diolan-u2c.c index 721f7ebf9a3b..b19a310bf9b3 100644 --- a/drivers/i2c/busses/i2c-diolan-u2c.c +++ b/drivers/i2c/busses/i2c-diolan-u2c.c @@ -455,7 +455,6 @@ static int diolan_u2c_probe(struct usb_interface *interface, /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (dev == NULL) { - dev_err(&interface->dev, "no memory for device state\n"); ret = -ENOMEM; goto error; } diff --git a/drivers/i2c/busses/i2c-efm32.c b/drivers/i2c/busses/i2c-efm32.c index 777ed409a24a..f7eccd682de9 100644 --- a/drivers/i2c/busses/i2c-efm32.c +++ b/drivers/i2c/busses/i2c-efm32.c @@ -320,10 +320,8 @@ static int efm32_i2c_probe(struct platform_device *pdev) return -EINVAL; ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL); - if (!ddata) { - dev_dbg(&pdev->dev, "failed to allocate private data\n"); + if (!ddata) return -ENOMEM; - } platform_set_drvdata(pdev, ddata); init_completion(&ddata->done); diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c index ff775ac29e49..a44ea13d1434 100644 --- a/drivers/i2c/busses/i2c-eg20t.c +++ b/drivers/i2c/busses/i2c-eg20t.c @@ -751,10 +751,8 @@ static int pch_i2c_probe(struct pci_dev *pdev, pch_pci_dbg(pdev, "Entered.\n"); adap_info = kzalloc((sizeof(struct adapter_info)), GFP_KERNEL); - if (adap_info == NULL) { - pch_pci_err(pdev, "Memory allocation FAILED\n"); + if (adap_info == NULL) return -ENOMEM; - } ret = pci_enable_device(pdev); if (ret) { diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c index 00af0a0a3361..63d229202854 100644 --- a/drivers/i2c/busses/i2c-exynos5.c +++ b/drivers/i2c/busses/i2c-exynos5.c @@ -76,12 +76,6 @@ #define HSI2C_RXFIFO_TRIGGER_LEVEL(x) ((x) << 4) #define HSI2C_TXFIFO_TRIGGER_LEVEL(x) ((x) << 16) -/* As per user manual FIFO max depth is 64bytes */ -#define HSI2C_FIFO_MAX 0x40 -/* default trigger levels for Tx and Rx FIFOs */ -#define HSI2C_DEF_TXFIFO_LVL (HSI2C_FIFO_MAX - 0x30) -#define HSI2C_DEF_RXFIFO_LVL (HSI2C_FIFO_MAX - 0x10) - /* I2C_TRAILING_CTL Register bits */ #define HSI2C_TRAILING_COUNT (0xf) @@ -183,14 +177,54 @@ struct exynos5_i2c { * 2. Fast speed upto 1Mbps */ int speed_mode; + + /* Version of HS-I2C Hardware */ + struct exynos_hsi2c_variant *variant; +}; + +/** + * struct exynos_hsi2c_variant - platform specific HSI2C driver data + * @fifo_depth: the fifo depth supported by the HSI2C module + * + * Specifies platform specific configuration of HSI2C module. + * Note: A structure for driver specific platform data is used for future + * expansion of its usage. + */ +struct exynos_hsi2c_variant { + unsigned int fifo_depth; +}; + +static const struct exynos_hsi2c_variant exynos5250_hsi2c_data = { + .fifo_depth = 64, +}; + +static const struct exynos_hsi2c_variant exynos5260_hsi2c_data = { + .fifo_depth = 16, }; static const struct of_device_id exynos5_i2c_match[] = { - { .compatible = "samsung,exynos5-hsi2c" }, - {}, + { + .compatible = "samsung,exynos5-hsi2c", + .data = &exynos5250_hsi2c_data + }, { + .compatible = "samsung,exynos5250-hsi2c", + .data = &exynos5250_hsi2c_data + }, { + .compatible = "samsung,exynos5260-hsi2c", + .data = &exynos5260_hsi2c_data + }, {}, }; MODULE_DEVICE_TABLE(of, exynos5_i2c_match); +static inline struct exynos_hsi2c_variant *exynos5_i2c_get_variant + (struct platform_device *pdev) +{ + const struct of_device_id *match; + + match = of_match_node(exynos5_i2c_match, pdev->dev.of_node); + return (struct exynos_hsi2c_variant *)match->data; +} + static void exynos5_i2c_clr_pend_irq(struct exynos5_i2c *i2c) { writel(readl(i2c->regs + HSI2C_INT_STATUS), @@ -415,7 +449,7 @@ static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id) fifo_status = readl(i2c->regs + HSI2C_FIFO_STATUS); fifo_level = HSI2C_TX_FIFO_LVL(fifo_status); - len = HSI2C_FIFO_MAX - fifo_level; + len = i2c->variant->fifo_depth - fifo_level; if (len > (i2c->msg->len - i2c->msg_ptr)) len = i2c->msg->len - i2c->msg_ptr; @@ -483,6 +517,7 @@ static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop) u32 i2c_auto_conf = 0; u32 fifo_ctl; unsigned long flags; + unsigned short trig_lvl; i2c_ctl = readl(i2c->regs + HSI2C_CTL); i2c_ctl &= ~(HSI2C_TXCHON | HSI2C_RXCHON); @@ -493,13 +528,19 @@ static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop) i2c_auto_conf = HSI2C_READ_WRITE; - fifo_ctl |= HSI2C_RXFIFO_TRIGGER_LEVEL(HSI2C_DEF_TXFIFO_LVL); + trig_lvl = (i2c->msg->len > i2c->variant->fifo_depth) ? + (i2c->variant->fifo_depth * 3 / 4) : i2c->msg->len; + fifo_ctl |= HSI2C_RXFIFO_TRIGGER_LEVEL(trig_lvl); + int_en |= (HSI2C_INT_RX_ALMOSTFULL_EN | HSI2C_INT_TRAILING_EN); } else { i2c_ctl |= HSI2C_TXCHON; - fifo_ctl |= HSI2C_TXFIFO_TRIGGER_LEVEL(HSI2C_DEF_RXFIFO_LVL); + trig_lvl = (i2c->msg->len > i2c->variant->fifo_depth) ? + (i2c->variant->fifo_depth * 1 / 4) : i2c->msg->len; + fifo_ctl |= HSI2C_TXFIFO_TRIGGER_LEVEL(trig_lvl); + int_en |= HSI2C_INT_TX_ALMOSTEMPTY_EN; } @@ -621,10 +662,8 @@ static int exynos5_i2c_probe(struct platform_device *pdev) int ret; i2c = devm_kzalloc(&pdev->dev, sizeof(struct exynos5_i2c), GFP_KERNEL); - if (!i2c) { - dev_err(&pdev->dev, "no memory for state\n"); + if (!i2c) return -ENOMEM; - } if (of_property_read_u32(np, "clock-frequency", &op_clock)) { i2c->speed_mode = HSI2C_FAST_SPD; @@ -691,7 +730,9 @@ static int exynos5_i2c_probe(struct platform_device *pdev) if (ret) goto err_clk; - exynos5_i2c_init(i2c); + i2c->variant = exynos5_i2c_get_variant(pdev); + + exynos5_i2c_reset(i2c); ret = i2c_add_adapter(&i2c->adap); if (ret < 0) { diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index 02d2d4abb9dd..71a45b210a24 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -147,24 +147,22 @@ static int i2c_gpio_probe(struct platform_device *pdev) scl_pin = pdata->scl_pin; } - ret = gpio_request(sda_pin, "sda"); + ret = devm_gpio_request(&pdev->dev, sda_pin, "sda"); if (ret) { if (ret == -EINVAL) ret = -EPROBE_DEFER; /* Try again later */ - goto err_request_sda; + return ret; } - ret = gpio_request(scl_pin, "scl"); + ret = devm_gpio_request(&pdev->dev, scl_pin, "scl"); if (ret) { if (ret == -EINVAL) ret = -EPROBE_DEFER; /* Try again later */ - goto err_request_scl; + return ret; } priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); - if (!priv) { - ret = -ENOMEM; - goto err_add_bus; - } + if (!priv) + return -ENOMEM; adap = &priv->adap; bit_data = &priv->bit_data; pdata = &priv->pdata; @@ -225,7 +223,7 @@ static int i2c_gpio_probe(struct platform_device *pdev) adap->nr = pdev->id; ret = i2c_bit_add_numbered_bus(adap); if (ret) - goto err_add_bus; + return ret; platform_set_drvdata(pdev, priv); @@ -235,13 +233,6 @@ static int i2c_gpio_probe(struct platform_device *pdev) ? ", no clock stretching" : ""); return 0; - -err_add_bus: - gpio_free(scl_pin); -err_request_scl: - gpio_free(sda_pin); -err_request_sda: - return ret; } static int i2c_gpio_remove(struct platform_device *pdev) @@ -255,8 +246,6 @@ static int i2c_gpio_remove(struct platform_device *pdev) pdata = &priv->pdata; i2c_del_adapter(adap); - gpio_free(pdata->scl_pin); - gpio_free(pdata->sda_pin); return 0; } diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index db895fb22e65..aa8bc146718b 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -183,6 +183,8 @@ struct imx_i2c_struct { unsigned int disable_delay; int stopped; unsigned int ifdr; /* IMX_I2C_IFDR */ + unsigned int cur_clk; + unsigned int bitrate; const struct imx_i2c_hwdata *hwdata; }; @@ -305,6 +307,48 @@ static int i2c_imx_acked(struct imx_i2c_struct *i2c_imx) return 0; } +static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx) +{ + struct imx_i2c_clk_pair *i2c_clk_div = i2c_imx->hwdata->clk_div; + unsigned int i2c_clk_rate; + unsigned int div; + int i; + + /* Divider value calculation */ + i2c_clk_rate = clk_get_rate(i2c_imx->clk); + if (i2c_imx->cur_clk == i2c_clk_rate) + return; + else + i2c_imx->cur_clk = i2c_clk_rate; + + div = (i2c_clk_rate + i2c_imx->bitrate - 1) / i2c_imx->bitrate; + if (div < i2c_clk_div[0].div) + i = 0; + else if (div > i2c_clk_div[i2c_imx->hwdata->ndivs - 1].div) + i = i2c_imx->hwdata->ndivs - 1; + else + for (i = 0; i2c_clk_div[i].div < div; i++); + + /* Store divider value */ + i2c_imx->ifdr = i2c_clk_div[i].val; + + /* + * There dummy delay is calculated. + * It should be about one I2C clock period long. + * This delay is used in I2C bus disable function + * to fix chip hardware bug. + */ + i2c_imx->disable_delay = (500000U * i2c_clk_div[i].div + + (i2c_clk_rate / 2) - 1) / (i2c_clk_rate / 2); + +#ifdef CONFIG_I2C_DEBUG_BUS + dev_dbg(&i2c_imx->adapter.dev, "I2C_CLK=%d, REQ DIV=%d\n", + i2c_clk_rate, div); + dev_dbg(&i2c_imx->adapter.dev, "IFDR[IC]=0x%x, REAL DIV=%d\n", + i2c_clk_div[i].val, i2c_clk_div[i].div); +#endif +} + static int i2c_imx_start(struct imx_i2c_struct *i2c_imx) { unsigned int temp = 0; @@ -312,6 +356,8 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx) dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); + i2c_imx_set_clk(i2c_imx); + result = clk_prepare_enable(i2c_imx->clk); if (result) return result; @@ -367,45 +413,6 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) clk_disable_unprepare(i2c_imx->clk); } -static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, - unsigned int rate) -{ - struct imx_i2c_clk_pair *i2c_clk_div = i2c_imx->hwdata->clk_div; - unsigned int i2c_clk_rate; - unsigned int div; - int i; - - /* Divider value calculation */ - i2c_clk_rate = clk_get_rate(i2c_imx->clk); - div = (i2c_clk_rate + rate - 1) / rate; - if (div < i2c_clk_div[0].div) - i = 0; - else if (div > i2c_clk_div[i2c_imx->hwdata->ndivs - 1].div) - i = i2c_imx->hwdata->ndivs - 1; - else - for (i = 0; i2c_clk_div[i].div < div; i++); - - /* Store divider value */ - i2c_imx->ifdr = i2c_clk_div[i].val; - - /* - * There dummy delay is calculated. - * It should be about one I2C clock period long. - * This delay is used in I2C bus disable function - * to fix chip hardware bug. - */ - i2c_imx->disable_delay = (500000U * i2c_clk_div[i].div - + (i2c_clk_rate / 2) - 1) / (i2c_clk_rate / 2); - - /* dev_dbg() can't be used, because adapter is not yet registered */ -#ifdef CONFIG_I2C_DEBUG_BUS - dev_dbg(&i2c_imx->adapter.dev, "<%s> I2C_CLK=%d, REQ DIV=%d\n", - __func__, i2c_clk_rate, div); - dev_dbg(&i2c_imx->adapter.dev, "<%s> IFDR[IC]=0x%x, REAL DIV=%d\n", - __func__, i2c_clk_div[i].val, i2c_clk_div[i].div); -#endif -} - static irqreturn_t i2c_imx_isr(int irq, void *dev_id) { struct imx_i2c_struct *i2c_imx = dev_id; @@ -458,10 +465,11 @@ static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs) return 0; } -static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs) +static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bool is_lastmsg) { int i, result; unsigned int temp; + int block_data = msgs->flags & I2C_M_RECV_LEN; dev_dbg(&i2c_imx->adapter.dev, "<%s> write slave address: addr=0x%x\n", @@ -481,7 +489,12 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs) /* setup bus to read data */ temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); temp &= ~I2CR_MTX; - if (msgs->len - 1) + + /* + * Reset the I2CR_TXAK flag initially for SMBus block read since the + * length is unknown + */ + if ((msgs->len - 1) || block_data) temp &= ~I2CR_TXAK; imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); /* dummy read */ @@ -490,19 +503,49 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs) /* read data */ for (i = 0; i < msgs->len; i++) { + u8 len = 0; result = i2c_imx_trx_complete(i2c_imx); if (result) return result; - if (i == (msgs->len - 1)) { - /* It must generate STOP before read I2DR to prevent - controller from generating another clock cycle */ + /* + * First byte is the length of remaining packet + * in the SMBus block data read. Add it to + * msgs->len. + */ + if ((!i) && block_data) { + len = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); + if ((len == 0) || (len > I2C_SMBUS_BLOCK_MAX)) + return -EPROTO; dev_dbg(&i2c_imx->adapter.dev, - "<%s> clear MSTA\n", __func__); - temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); - temp &= ~(I2CR_MSTA | I2CR_MTX); - imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); - i2c_imx_bus_busy(i2c_imx, 0); - i2c_imx->stopped = 1; + "<%s> read length: 0x%X\n", + __func__, len); + msgs->len += len; + } + if (i == (msgs->len - 1)) { + if (is_lastmsg) { + /* + * It must generate STOP before read I2DR to prevent + * controller from generating another clock cycle + */ + dev_dbg(&i2c_imx->adapter.dev, + "<%s> clear MSTA\n", __func__); + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); + temp &= ~(I2CR_MSTA | I2CR_MTX); + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); + i2c_imx_bus_busy(i2c_imx, 0); + i2c_imx->stopped = 1; + } else { + /* + * For i2c master receiver repeat restart operation like: + * read -> repeat MSTA -> read/write + * The controller must set MTX before read the last byte in + * the first read operation, otherwise the first read cost + * one extra clock cycle. + */ + temp = readb(i2c_imx->base + IMX_I2C_I2CR); + temp |= I2CR_MTX; + writeb(temp, i2c_imx->base + IMX_I2C_I2CR); + } } else if (i == (msgs->len - 2)) { dev_dbg(&i2c_imx->adapter.dev, "<%s> set TXAK\n", __func__); @@ -510,7 +553,10 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs) temp |= I2CR_TXAK; imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); } - msgs->buf[i] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); + if ((!i) && block_data) + msgs->buf[0] = len; + else + msgs->buf[i] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); dev_dbg(&i2c_imx->adapter.dev, "<%s> read byte: B%d=0x%X\n", __func__, i, msgs->buf[i]); @@ -523,6 +569,7 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter, { unsigned int i, temp; int result; + bool is_lastmsg = false; struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(adapter); dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); @@ -534,6 +581,9 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter, /* read/write data */ for (i = 0; i < num; i++) { + if (i == num - 1) + is_lastmsg = true; + if (i) { dev_dbg(&i2c_imx->adapter.dev, "<%s> repeated start\n", __func__); @@ -564,7 +614,7 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter, (temp & I2SR_RXAK ? 1 : 0)); #endif if (msgs[i].flags & I2C_M_RD) - result = i2c_imx_read(i2c_imx, &msgs[i]); + result = i2c_imx_read(i2c_imx, &msgs[i], is_lastmsg); else result = i2c_imx_write(i2c_imx, &msgs[i]); if (result) @@ -583,7 +633,8 @@ fail0: static u32 i2c_imx_func(struct i2c_adapter *adapter) { - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL + | I2C_FUNC_SMBUS_READ_BLOCK_DATA; } static struct i2c_algorithm i2c_imx_algo = { @@ -600,7 +651,6 @@ static int i2c_imx_probe(struct platform_device *pdev) struct imxi2c_platform_data *pdata = dev_get_platdata(&pdev->dev); void __iomem *base; int irq, ret; - u32 bitrate; dev_dbg(&pdev->dev, "<%s>\n", __func__); @@ -617,10 +667,8 @@ static int i2c_imx_probe(struct platform_device *pdev) i2c_imx = devm_kzalloc(&pdev->dev, sizeof(struct imx_i2c_struct), GFP_KERNEL); - if (!i2c_imx) { - dev_err(&pdev->dev, "can't allocate interface\n"); + if (!i2c_imx) return -ENOMEM; - } if (of_id) i2c_imx->hwdata = of_id->data; @@ -664,12 +712,11 @@ static int i2c_imx_probe(struct platform_device *pdev) i2c_set_adapdata(&i2c_imx->adapter, i2c_imx); /* Set up clock divider */ - bitrate = IMX_I2C_BIT_RATE; + i2c_imx->bitrate = IMX_I2C_BIT_RATE; ret = of_property_read_u32(pdev->dev.of_node, - "clock-frequency", &bitrate); + "clock-frequency", &i2c_imx->bitrate); if (ret < 0 && pdata && pdata->bitrate) - bitrate = pdata->bitrate; - i2c_imx_set_clk(i2c_imx, bitrate); + i2c_imx->bitrate = pdata->bitrate; /* Set up chip registers to defaults */ imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN, diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index f5391633b53a..6a32aa095f83 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -115,7 +115,7 @@ static void mpc_i2c_fixup(struct mpc_i2c *i2c) for (k = 9; k; k--) { writeccr(i2c, 0); writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN); - udelay(delay_val); + readb(i2c->base + MPC_I2C_DR); writeccr(i2c, CCR_MEN); udelay(delay_val << 1); } diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 540ea692bf79..9f4b775e2e39 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -681,7 +681,7 @@ static const struct i2c_algorithm mv64xxx_i2c_algo = { ***************************************************************************** */ static const struct of_device_id mv64xxx_i2c_of_match_table[] = { - { .compatible = "allwinner,sun4i-i2c", .data = &mv64xxx_i2c_regs_sun4i}, + { .compatible = "allwinner,sun4i-a10-i2c", .data = &mv64xxx_i2c_regs_sun4i}, { .compatible = "allwinner,sun6i-a31-i2c", .data = &mv64xxx_i2c_regs_sun4i}, { .compatible = "marvell,mv64xxx-i2c", .data = &mv64xxx_i2c_regs_mv64xxx}, { .compatible = "marvell,mv78230-i2c", .data = &mv64xxx_i2c_regs_mv64xxx}, diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index 32c85e9ecdae..0e55d85fd4ed 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -879,19 +879,19 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg) #ifdef CONFIG_PM_SLEEP static int nmk_i2c_suspend_late(struct device *dev) { - pinctrl_pm_select_sleep_state(dev); + int ret; + ret = pm_runtime_force_suspend(dev); + if (ret) + return ret; + + pinctrl_pm_select_sleep_state(dev); return 0; } static int nmk_i2c_resume_early(struct device *dev) { - /* First go to the default state */ - pinctrl_pm_select_default_state(dev); - /* Then let's idle the pins until the next transfer happens */ - pinctrl_pm_select_idle_state(dev); - - return 0; + return pm_runtime_force_resume(dev); } #endif diff --git a/drivers/i2c/busses/i2c-nuc900.c b/drivers/i2c/busses/i2c-nuc900.c deleted file mode 100644 index 36394d737faf..000000000000 --- a/drivers/i2c/busses/i2c-nuc900.c +++ /dev/null @@ -1,709 +0,0 @@ -/* - * linux/drivers/i2c/busses/i2c-nuc900.c - * - * Copyright (c) 2010 Nuvoton technology corporation. - * - * This driver based on S3C2410 I2C driver of Ben Dooks <ben-Y5A6D6n0/KfQXOPxS62xeg@public.gmane.org>. - * Written by Wan ZongShun <mcuos.com-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation;version 2 of the License. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> - -#include <linux/i2c.h> -#include <linux/init.h> -#include <linux/time.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/cpufreq.h> -#include <linux/slab.h> -#include <linux/io.h> - -#include <mach/mfp.h> -#include <linux/platform_data/i2c-nuc900.h> - -/* nuc900 i2c registers offset */ - -#define CSR 0x00 -#define DIVIDER 0x04 -#define CMDR 0x08 -#define SWR 0x0C -#define RXR 0x10 -#define TXR 0x14 - -/* nuc900 i2c CSR register bits */ - -#define IRQEN 0x003 -#define I2CBUSY 0x400 -#define I2CSTART 0x018 -#define IRQFLAG 0x004 -#define ARBIT_LOST 0x200 -#define SLAVE_ACK 0x800 - -/* nuc900 i2c CMDR register bits */ - -#define I2C_CMD_START 0x10 -#define I2C_CMD_STOP 0x08 -#define I2C_CMD_READ 0x04 -#define I2C_CMD_WRITE 0x02 -#define I2C_CMD_NACK 0x01 - -/* i2c controller state */ - -enum nuc900_i2c_state { - STATE_IDLE, - STATE_START, - STATE_READ, - STATE_WRITE, - STATE_STOP -}; - -/* i2c controller private data */ - -struct nuc900_i2c { - spinlock_t lock; - wait_queue_head_t wait; - - struct i2c_msg *msg; - unsigned int msg_num; - unsigned int msg_idx; - unsigned int msg_ptr; - unsigned int irq; - - enum nuc900_i2c_state state; - - void __iomem *regs; - struct clk *clk; - struct device *dev; - struct resource *ioarea; - struct i2c_adapter adap; -}; - -/* nuc900_i2c_master_complete - * - * complete the message and wake up the caller, using the given return code, - * or zero to mean ok. -*/ - -static inline void nuc900_i2c_master_complete(struct nuc900_i2c *i2c, int ret) -{ - dev_dbg(i2c->dev, "master_complete %d\n", ret); - - i2c->msg_ptr = 0; - i2c->msg = NULL; - i2c->msg_idx++; - i2c->msg_num = 0; - if (ret) - i2c->msg_idx = ret; - - wake_up(&i2c->wait); -} - -/* irq enable/disable functions */ - -static inline void nuc900_i2c_disable_irq(struct nuc900_i2c *i2c) -{ - unsigned long tmp; - - tmp = readl(i2c->regs + CSR); - writel(tmp & ~IRQEN, i2c->regs + CSR); -} - -static inline void nuc900_i2c_enable_irq(struct nuc900_i2c *i2c) -{ - unsigned long tmp; - - tmp = readl(i2c->regs + CSR); - writel(tmp | IRQEN, i2c->regs + CSR); -} - - -/* nuc900_i2c_message_start - * - * put the start of a message onto the bus -*/ - -static void nuc900_i2c_message_start(struct nuc900_i2c *i2c, - struct i2c_msg *msg) -{ - unsigned int addr = (msg->addr & 0x7f) << 1; - - if (msg->flags & I2C_M_RD) - addr |= 0x1; - writel(addr & 0xff, i2c->regs + TXR); - writel(I2C_CMD_START | I2C_CMD_WRITE, i2c->regs + CMDR); -} - -static inline void nuc900_i2c_stop(struct nuc900_i2c *i2c, int ret) -{ - - dev_dbg(i2c->dev, "STOP\n"); - - /* stop the transfer */ - i2c->state = STATE_STOP; - writel(I2C_CMD_STOP, i2c->regs + CMDR); - - nuc900_i2c_master_complete(i2c, ret); - nuc900_i2c_disable_irq(i2c); -} - -/* helper functions to determine the current state in the set of - * messages we are sending -*/ - -/* is_lastmsg() - * - * returns TRUE if the current message is the last in the set -*/ - -static inline int is_lastmsg(struct nuc900_i2c *i2c) -{ - return i2c->msg_idx >= (i2c->msg_num - 1); -} - -/* is_msglast - * - * returns TRUE if we this is the last byte in the current message -*/ - -static inline int is_msglast(struct nuc900_i2c *i2c) -{ - return i2c->msg_ptr == i2c->msg->len-1; -} - -/* is_msgend - * - * returns TRUE if we reached the end of the current message -*/ - -static inline int is_msgend(struct nuc900_i2c *i2c) -{ - return i2c->msg_ptr >= i2c->msg->len; -} - -/* i2c_nuc900_irq_nextbyte - * - * process an interrupt and work out what to do - */ - -static void i2c_nuc900_irq_nextbyte(struct nuc900_i2c *i2c, - unsigned long iicstat) -{ - unsigned char byte; - - switch (i2c->state) { - - case STATE_IDLE: - dev_err(i2c->dev, "%s: called in STATE_IDLE\n", __func__); - break; - - case STATE_STOP: - dev_err(i2c->dev, "%s: called in STATE_STOP\n", __func__); - nuc900_i2c_disable_irq(i2c); - break; - - case STATE_START: - /* last thing we did was send a start condition on the - * bus, or started a new i2c message - */ - - if (iicstat & SLAVE_ACK && - !(i2c->msg->flags & I2C_M_IGNORE_NAK)) { - /* ack was not received... */ - - dev_dbg(i2c->dev, "ack was not received\n"); - nuc900_i2c_stop(i2c, -ENXIO); - break; - } - - if (i2c->msg->flags & I2C_M_RD) - i2c->state = STATE_READ; - else - i2c->state = STATE_WRITE; - - /* terminate the transfer if there is nothing to do - * as this is used by the i2c probe to find devices. - */ - - if (is_lastmsg(i2c) && i2c->msg->len == 0) { - nuc900_i2c_stop(i2c, 0); - break; - } - - if (i2c->state == STATE_READ) - goto prepare_read; - - /* fall through to the write state, as we will need to - * send a byte as well - */ - - case STATE_WRITE: - /* we are writing data to the device... check for the - * end of the message, and if so, work out what to do - */ - - if (!(i2c->msg->flags & I2C_M_IGNORE_NAK)) { - if (iicstat & SLAVE_ACK) { - dev_dbg(i2c->dev, "WRITE: No Ack\n"); - - nuc900_i2c_stop(i2c, -ECONNREFUSED); - break; - } - } - -retry_write: - - if (!is_msgend(i2c)) { - byte = i2c->msg->buf[i2c->msg_ptr++]; - writeb(byte, i2c->regs + TXR); - writel(I2C_CMD_WRITE, i2c->regs + CMDR); - - } else if (!is_lastmsg(i2c)) { - /* we need to go to the next i2c message */ - - dev_dbg(i2c->dev, "WRITE: Next Message\n"); - - i2c->msg_ptr = 0; - i2c->msg_idx++; - i2c->msg++; - - /* check to see if we need to do another message */ - if (i2c->msg->flags & I2C_M_NOSTART) { - - if (i2c->msg->flags & I2C_M_RD) { - /* cannot do this, the controller - * forces us to send a new START - * when we change direction - */ - - nuc900_i2c_stop(i2c, -EINVAL); - } - - goto retry_write; - } else { - /* send the new start */ - nuc900_i2c_message_start(i2c, i2c->msg); - i2c->state = STATE_START; - } - - } else { - /* send stop */ - - nuc900_i2c_stop(i2c, 0); - } - break; - - case STATE_READ: - /* we have a byte of data in the data register, do - * something with it, and then work out whether we are - * going to do any more read/write - */ - - byte = readb(i2c->regs + RXR); - i2c->msg->buf[i2c->msg_ptr++] = byte; - -prepare_read: - if (is_msglast(i2c)) { - /* last byte of buffer */ - - if (is_lastmsg(i2c)) - writel(I2C_CMD_READ | I2C_CMD_NACK, - i2c->regs + CMDR); - - } else if (is_msgend(i2c)) { - /* ok, we've read the entire buffer, see if there - * is anything else we need to do - */ - - if (is_lastmsg(i2c)) { - /* last message, send stop and complete */ - dev_dbg(i2c->dev, "READ: Send Stop\n"); - - nuc900_i2c_stop(i2c, 0); - } else { - /* go to the next transfer */ - dev_dbg(i2c->dev, "READ: Next Transfer\n"); - - i2c->msg_ptr = 0; - i2c->msg_idx++; - i2c->msg++; - - writel(I2C_CMD_READ, i2c->regs + CMDR); - } - - } else { - writel(I2C_CMD_READ, i2c->regs + CMDR); - } - - break; - } -} - -/* nuc900_i2c_irq - * - * top level IRQ servicing routine -*/ - -static irqreturn_t nuc900_i2c_irq(int irqno, void *dev_id) -{ - struct nuc900_i2c *i2c = dev_id; - unsigned long status; - - status = readl(i2c->regs + CSR); - writel(status | IRQFLAG, i2c->regs + CSR); - - if (status & ARBIT_LOST) { - /* deal with arbitration loss */ - dev_err(i2c->dev, "deal with arbitration loss\n"); - goto out; - } - - if (i2c->state == STATE_IDLE) { - dev_dbg(i2c->dev, "IRQ: error i2c->state == IDLE\n"); - goto out; - } - - /* pretty much this leaves us with the fact that we've - * transmitted or received whatever byte we last sent - */ - - i2c_nuc900_irq_nextbyte(i2c, status); - - out: - return IRQ_HANDLED; -} - - -/* nuc900_i2c_set_master - * - * get the i2c bus for a master transaction -*/ - -static int nuc900_i2c_set_master(struct nuc900_i2c *i2c) -{ - int timeout = 400; - - while (timeout-- > 0) { - if (((readl(i2c->regs + SWR) & I2CSTART) == I2CSTART) && - ((readl(i2c->regs + CSR) & I2CBUSY) == 0)) { - return 0; - } - - msleep(1); - } - - return -ETIMEDOUT; -} - -/* nuc900_i2c_doxfer - * - * this starts an i2c transfer -*/ - -static int nuc900_i2c_doxfer(struct nuc900_i2c *i2c, - struct i2c_msg *msgs, int num) -{ - unsigned long iicstat, timeout; - int spins = 20; - int ret; - - ret = nuc900_i2c_set_master(i2c); - if (ret != 0) { - dev_err(i2c->dev, "cannot get bus (error %d)\n", ret); - ret = -EAGAIN; - goto out; - } - - spin_lock_irq(&i2c->lock); - - i2c->msg = msgs; - i2c->msg_num = num; - i2c->msg_ptr = 0; - i2c->msg_idx = 0; - i2c->state = STATE_START; - - nuc900_i2c_message_start(i2c, msgs); - spin_unlock_irq(&i2c->lock); - - timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5); - - ret = i2c->msg_idx; - - /* having these next two as dev_err() makes life very - * noisy when doing an i2cdetect - */ - - if (timeout == 0) - dev_dbg(i2c->dev, "timeout\n"); - else if (ret != num) - dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret); - - /* ensure the stop has been through the bus */ - - dev_dbg(i2c->dev, "waiting for bus idle\n"); - - /* first, try busy waiting briefly */ - do { - iicstat = readl(i2c->regs + CSR); - } while ((iicstat & I2CBUSY) && --spins); - - /* if that timed out sleep */ - if (!spins) { - msleep(1); - iicstat = readl(i2c->regs + CSR); - } - - if (iicstat & I2CBUSY) - dev_warn(i2c->dev, "timeout waiting for bus idle\n"); - - out: - return ret; -} - -/* nuc900_i2c_xfer - * - * first port of call from the i2c bus code when an message needs - * transferring across the i2c bus. -*/ - -static int nuc900_i2c_xfer(struct i2c_adapter *adap, - struct i2c_msg *msgs, int num) -{ - struct nuc900_i2c *i2c = (struct nuc900_i2c *)adap->algo_data; - int retry; - int ret; - - nuc900_i2c_enable_irq(i2c); - - for (retry = 0; retry < adap->retries; retry++) { - - ret = nuc900_i2c_doxfer(i2c, msgs, num); - - if (ret != -EAGAIN) - return ret; - - dev_dbg(i2c->dev, "Retrying transmission (%d)\n", retry); - - udelay(100); - } - - return -EREMOTEIO; -} - -/* declare our i2c functionality */ -static u32 nuc900_i2c_func(struct i2c_adapter *adap) -{ - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_NOSTART | - I2C_FUNC_PROTOCOL_MANGLING; -} - -/* i2c bus registration info */ - -static const struct i2c_algorithm nuc900_i2c_algorithm = { - .master_xfer = nuc900_i2c_xfer, - .functionality = nuc900_i2c_func, -}; - -/* nuc900_i2c_probe - * - * called by the bus driver when a suitable device is found -*/ - -static int nuc900_i2c_probe(struct platform_device *pdev) -{ - struct nuc900_i2c *i2c; - struct nuc900_platform_i2c *pdata; - struct resource *res; - int ret; - - pdata = dev_get_platdata(&pdev->dev); - if (!pdata) { - dev_err(&pdev->dev, "no platform data\n"); - return -EINVAL; - } - - i2c = kzalloc(sizeof(struct nuc900_i2c), GFP_KERNEL); - if (!i2c) { - dev_err(&pdev->dev, "no memory for state\n"); - return -ENOMEM; - } - - strlcpy(i2c->adap.name, "nuc900-i2c0", sizeof(i2c->adap.name)); - i2c->adap.owner = THIS_MODULE; - i2c->adap.algo = &nuc900_i2c_algorithm; - i2c->adap.retries = 2; - i2c->adap.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; - - spin_lock_init(&i2c->lock); - init_waitqueue_head(&i2c->wait); - - /* find the clock and enable it */ - - i2c->dev = &pdev->dev; - i2c->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(i2c->clk)) { - dev_err(&pdev->dev, "cannot get clock\n"); - ret = -ENOENT; - goto err_noclk; - } - - dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk); - - clk_enable(i2c->clk); - - /* map the registers */ - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "cannot find IO resource\n"); - ret = -ENOENT; - goto err_clk; - } - - i2c->ioarea = request_mem_region(res->start, resource_size(res), - pdev->name); - - if (i2c->ioarea == NULL) { - dev_err(&pdev->dev, "cannot request IO\n"); - ret = -ENXIO; - goto err_clk; - } - - i2c->regs = ioremap(res->start, resource_size(res)); - - if (i2c->regs == NULL) { - dev_err(&pdev->dev, "cannot map IO\n"); - ret = -ENXIO; - goto err_ioarea; - } - - dev_dbg(&pdev->dev, "registers %p (%p, %p)\n", - i2c->regs, i2c->ioarea, res); - - /* setup info block for the i2c core */ - - i2c->adap.algo_data = i2c; - i2c->adap.dev.parent = &pdev->dev; - - mfp_set_groupg(&pdev->dev, NULL); - - clk_get_rate(i2c->clk); - - ret = (i2c->clk.apbfreq)/(pdata->bus_freq * 5) - 1; - writel(ret & 0xffff, i2c->regs + DIVIDER); - - /* find the IRQ for this unit (note, this relies on the init call to - * ensure no current IRQs pending - */ - - i2c->irq = ret = platform_get_irq(pdev, 0); - if (ret <= 0) { - dev_err(&pdev->dev, "cannot find IRQ\n"); - goto err_iomap; - } - - ret = request_irq(i2c->irq, nuc900_i2c_irq, IRQF_SHARED, - dev_name(&pdev->dev), i2c); - - if (ret != 0) { - dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq); - goto err_iomap; - } - - /* Note, previous versions of the driver used i2c_add_adapter() - * to add the bus at any number. We now pass the bus number via - * the platform data, so if unset it will now default to always - * being bus 0. - */ - - i2c->adap.nr = pdata->bus_num; - - ret = i2c_add_numbered_adapter(&i2c->adap); - if (ret < 0) { - dev_err(&pdev->dev, "failed to add bus to i2c core\n"); - goto err_irq; - } - - platform_set_drvdata(pdev, i2c); - - dev_info(&pdev->dev, "%s: NUC900 I2C adapter\n", - dev_name(&i2c->adap.dev)); - return 0; - - err_irq: - free_irq(i2c->irq, i2c); - - err_iomap: - iounmap(i2c->regs); - - err_ioarea: - release_resource(i2c->ioarea); - kfree(i2c->ioarea); - - err_clk: - clk_disable(i2c->clk); - clk_put(i2c->clk); - - err_noclk: - kfree(i2c); - return ret; -} - -/* nuc900_i2c_remove - * - * called when device is removed from the bus -*/ - -static int nuc900_i2c_remove(struct platform_device *pdev) -{ - struct nuc900_i2c *i2c = platform_get_drvdata(pdev); - - i2c_del_adapter(&i2c->adap); - free_irq(i2c->irq, i2c); - - clk_disable(i2c->clk); - clk_put(i2c->clk); - - iounmap(i2c->regs); - - release_resource(i2c->ioarea); - kfree(i2c->ioarea); - kfree(i2c); - - return 0; -} - -static struct platform_driver nuc900_i2c_driver = { - .probe = nuc900_i2c_probe, - .remove = nuc900_i2c_remove, - .driver = { - .owner = THIS_MODULE, - .name = "nuc900-i2c0", - }, -}; - -static int __init i2c_adap_nuc900_init(void) -{ - return platform_driver_register(&nuc900_i2c_driver); -} - -static void __exit i2c_adap_nuc900_exit(void) -{ - platform_driver_unregister(&nuc900_i2c_driver); -} -subsys_initcall(i2c_adap_nuc900_init); -module_exit(i2c_adap_nuc900_exit); - -MODULE_DESCRIPTION("NUC900 I2C Bus driver"); -MODULE_AUTHOR("Wan ZongShun, <mcuos.com-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:nuc900-i2c0"); diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index 1f6369f14fb6..0e10cc6182f0 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -250,7 +250,7 @@ static struct i2c_adapter ocores_adapter = { .algo = &ocores_algorithm, }; -static struct of_device_id ocores_i2c_match[] = { +static const struct of_device_id ocores_i2c_match[] = { { .compatible = "opencores,i2c-ocores", .data = (void *)TYPE_OCORES, diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 85f8eac9ba18..b182793a4051 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1114,10 +1114,8 @@ omap_i2c_probe(struct platform_device *pdev) } dev = devm_kzalloc(&pdev->dev, sizeof(struct omap_i2c_dev), GFP_KERNEL); - if (!dev) { - dev_err(&pdev->dev, "Menory allocation failed\n"); + if (!dev) return -ENOMEM; - } mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); dev->base = devm_ioremap_resource(&pdev->dev, mem); diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index bbe6dfbc5c05..be671f7a0e06 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -1084,7 +1084,7 @@ static const struct i2c_algorithm i2c_pxa_pio_algorithm = { .functionality = i2c_pxa_functionality, }; -static struct of_device_id i2c_pxa_dt_ids[] = { +static const struct of_device_id i2c_pxa_dt_ids[] = { { .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX }, { .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX }, { .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA2XX }, diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index 06d47aafbb79..899405923678 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -1,7 +1,9 @@ /* - * drivers/i2c/busses/i2c-rcar.c + * Driver for the Renesas RCar I2C unit * - * Copyright (C) 2012 Renesas Solutions Corp. + * Copyright (C) 2014 Wolfram Sang <wsa@sang-engineering.com> + * + * Copyright (C) 2012-14 Renesas Solutions Corp. * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> * * This file is based on the drivers/i2c/busses/i2c-sh7760.c @@ -12,16 +14,12 @@ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License + * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/clk.h> #include <linux/delay.h> @@ -36,7 +34,6 @@ #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/slab.h> -#include <linux/spinlock.h> /* register offsets */ #define ICSCR 0x00 /* slave ctrl */ @@ -60,7 +57,7 @@ #define FSB (1 << 1) /* force stop bit */ #define ESG (1 << 0) /* en startbit gen */ -/* ICMSR */ +/* ICMSR (also for ICMIE) */ #define MNR (1 << 6) /* nack received */ #define MAL (1 << 5) /* arbitration lost */ #define MST (1 << 4) /* sent a stop */ @@ -69,32 +66,18 @@ #define MDR (1 << 1) #define MAT (1 << 0) /* slave addr xfer done */ -/* ICMIE */ -#define MNRE (1 << 6) /* nack irq en */ -#define MALE (1 << 5) /* arblos irq en */ -#define MSTE (1 << 4) /* stop irq en */ -#define MDEE (1 << 3) -#define MDTE (1 << 2) -#define MDRE (1 << 1) -#define MATE (1 << 0) /* address sent irq en */ +#define RCAR_BUS_PHASE_START (MDBS | MIE | ESG) +#define RCAR_BUS_PHASE_DATA (MDBS | MIE) +#define RCAR_BUS_PHASE_STOP (MDBS | MIE | FSB) -enum { - RCAR_BUS_PHASE_ADDR, - RCAR_BUS_PHASE_DATA, - RCAR_BUS_PHASE_STOP, -}; +#define RCAR_IRQ_SEND (MNR | MAL | MST | MAT | MDE) +#define RCAR_IRQ_RECV (MNR | MAL | MST | MAT | MDR) +#define RCAR_IRQ_STOP (MST) -enum { - RCAR_IRQ_CLOSE, - RCAR_IRQ_OPEN_FOR_SEND, - RCAR_IRQ_OPEN_FOR_RECV, - RCAR_IRQ_OPEN_FOR_STOP, -}; +#define RCAR_IRQ_ACK_SEND (~(MAT | MDE)) +#define RCAR_IRQ_ACK_RECV (~(MAT | MDR)) -/* - * flags - */ #define ID_LAST_MSG (1 << 0) #define ID_IOERROR (1 << 1) #define ID_DONE (1 << 2) @@ -112,14 +95,12 @@ struct rcar_i2c_priv { struct i2c_msg *msg; struct clk *clk; - spinlock_t lock; wait_queue_head_t wait; int pos; - int irq; u32 icccr; u32 flags; - enum rcar_i2c_type devtype; + enum rcar_i2c_type devtype; }; #define rcar_i2c_priv_to_dev(p) ((p)->adap.dev.parent) @@ -130,9 +111,7 @@ struct rcar_i2c_priv { #define LOOP_TIMEOUT 1024 -/* - * basic functions - */ + static void rcar_i2c_write(struct rcar_i2c_priv *priv, int reg, u32 val) { writel(val, priv->io + reg); @@ -161,36 +140,6 @@ static void rcar_i2c_init(struct rcar_i2c_priv *priv) rcar_i2c_write(priv, ICMAR, 0); } -static void rcar_i2c_irq_mask(struct rcar_i2c_priv *priv, int open) -{ - u32 val = MNRE | MALE | MSTE | MATE; /* default */ - - switch (open) { - case RCAR_IRQ_OPEN_FOR_SEND: - val |= MDEE; /* default + send */ - break; - case RCAR_IRQ_OPEN_FOR_RECV: - val |= MDRE; /* default + read */ - break; - case RCAR_IRQ_OPEN_FOR_STOP: - val = MSTE; /* stop irq only */ - break; - case RCAR_IRQ_CLOSE: - default: - val = 0; /* all close */ - break; - } - rcar_i2c_write(priv, ICMIER, val); -} - -static void rcar_i2c_set_addr(struct rcar_i2c_priv *priv, u32 recv) -{ - rcar_i2c_write(priv, ICMAR, (priv->msg->addr << 1) | recv); -} - -/* - * bus control functions - */ static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv) { int i; @@ -205,24 +154,6 @@ static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv) return -EBUSY; } -static void rcar_i2c_bus_phase(struct rcar_i2c_priv *priv, int phase) -{ - switch (phase) { - case RCAR_BUS_PHASE_ADDR: - rcar_i2c_write(priv, ICMCR, MDBS | MIE | ESG); - break; - case RCAR_BUS_PHASE_DATA: - rcar_i2c_write(priv, ICMCR, MDBS | MIE); - break; - case RCAR_BUS_PHASE_STOP: - rcar_i2c_write(priv, ICMCR, MDBS | MIE | FSB); - break; - } -} - -/* - * clock function - */ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, u32 bus_speed, struct device *dev) @@ -312,60 +243,18 @@ scgd_find: return 0; } -static void rcar_i2c_clock_start(struct rcar_i2c_priv *priv) -{ - rcar_i2c_write(priv, ICCCR, priv->icccr); -} - -/* - * status functions - */ -static u32 rcar_i2c_status_get(struct rcar_i2c_priv *priv) -{ - return rcar_i2c_read(priv, ICMSR); -} - -#define rcar_i2c_status_clear(priv) rcar_i2c_status_bit_clear(priv, 0xffffffff) -static void rcar_i2c_status_bit_clear(struct rcar_i2c_priv *priv, u32 bit) -{ - rcar_i2c_write(priv, ICMSR, ~bit); -} - -/* - * recv/send functions - */ -static int rcar_i2c_recv(struct rcar_i2c_priv *priv) -{ - rcar_i2c_set_addr(priv, 1); - rcar_i2c_status_clear(priv); - rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_ADDR); - rcar_i2c_irq_mask(priv, RCAR_IRQ_OPEN_FOR_RECV); - - return 0; -} - -static int rcar_i2c_send(struct rcar_i2c_priv *priv) +static int rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv) { - int ret; + int read = !!rcar_i2c_is_recv(priv); - /* - * It should check bus status when send case - */ - ret = rcar_i2c_bus_barrier(priv); - if (ret < 0) - return ret; - - rcar_i2c_set_addr(priv, 0); - rcar_i2c_status_clear(priv); - rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_ADDR); - rcar_i2c_irq_mask(priv, RCAR_IRQ_OPEN_FOR_SEND); + rcar_i2c_write(priv, ICMAR, (priv->msg->addr << 1) | read); + rcar_i2c_write(priv, ICMSR, 0); + rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START); + rcar_i2c_write(priv, ICMIER, read ? RCAR_IRQ_RECV : RCAR_IRQ_SEND); return 0; } -#define rcar_i2c_send_restart(priv) rcar_i2c_status_bit_clear(priv, (MAT | MDE)) -#define rcar_i2c_recv_restart(priv) rcar_i2c_status_bit_clear(priv, (MAT | MDR)) - /* * interrupt functions */ @@ -386,7 +275,7 @@ static int rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr) * goto data phase. */ if (msr & MAT) - rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_DATA); + rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_DATA); if (priv->pos < msg->len) { /* @@ -414,7 +303,7 @@ static int rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr) * prepare stop condition here. * ID_DONE will be set on STOP irq. */ - rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_STOP); + rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_STOP); else /* * If current msg is _NOT_ last msg, @@ -425,7 +314,7 @@ static int rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr) return ID_DONE; } - rcar_i2c_send_restart(priv); + rcar_i2c_write(priv, ICMSR, RCAR_IRQ_ACK_SEND); return 0; } @@ -462,11 +351,11 @@ static int rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr) * otherwise, go to DATA phase. */ if (priv->pos + 1 >= msg->len) - rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_STOP); + rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_STOP); else - rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_DATA); + rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_DATA); - rcar_i2c_recv_restart(priv); + rcar_i2c_write(priv, ICMSR, RCAR_IRQ_ACK_RECV); return 0; } @@ -474,53 +363,31 @@ static int rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr) static irqreturn_t rcar_i2c_irq(int irq, void *ptr) { struct rcar_i2c_priv *priv = ptr; - struct device *dev = rcar_i2c_priv_to_dev(priv); u32 msr; - /*-------------- spin lock -----------------*/ - spin_lock(&priv->lock); - - msr = rcar_i2c_status_get(priv); + msr = rcar_i2c_read(priv, ICMSR); - /* - * Arbitration lost - */ + /* Arbitration lost */ if (msr & MAL) { - /* - * CAUTION - * - * When arbitration lost, device become _slave_ mode. - */ - dev_dbg(dev, "Arbitration Lost\n"); rcar_i2c_flags_set(priv, (ID_DONE | ID_ARBLOST)); goto out; } - /* - * Stop - */ + /* Stop */ if (msr & MST) { - dev_dbg(dev, "Stop\n"); rcar_i2c_flags_set(priv, ID_DONE); goto out; } - /* - * Nack - */ + /* Nack */ if (msr & MNR) { - dev_dbg(dev, "Nack\n"); - /* go to stop phase */ - rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_STOP); - rcar_i2c_irq_mask(priv, RCAR_IRQ_OPEN_FOR_STOP); + rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_STOP); + rcar_i2c_write(priv, ICMIER, RCAR_IRQ_STOP); rcar_i2c_flags_set(priv, ID_NACK); goto out; } - /* - * recv/send - */ if (rcar_i2c_is_recv(priv)) rcar_i2c_flags_set(priv, rcar_i2c_irq_recv(priv, msr)); else @@ -528,14 +395,11 @@ static irqreturn_t rcar_i2c_irq(int irq, void *ptr) out: if (rcar_i2c_flags_has(priv, ID_DONE)) { - rcar_i2c_irq_mask(priv, RCAR_IRQ_CLOSE); - rcar_i2c_status_clear(priv); + rcar_i2c_write(priv, ICMIER, 0); + rcar_i2c_write(priv, ICMSR, 0); wake_up(&priv->wait); } - spin_unlock(&priv->lock); - /*-------------- spin unlock -----------------*/ - return IRQ_HANDLED; } @@ -545,21 +409,18 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap, { struct rcar_i2c_priv *priv = i2c_get_adapdata(adap); struct device *dev = rcar_i2c_priv_to_dev(priv); - unsigned long flags; int i, ret, timeout; pm_runtime_get_sync(dev); - /*-------------- spin lock -----------------*/ - spin_lock_irqsave(&priv->lock, flags); - rcar_i2c_init(priv); - rcar_i2c_clock_start(priv); + /* start clock */ + rcar_i2c_write(priv, ICCCR, priv->icccr); - spin_unlock_irqrestore(&priv->lock, flags); - /*-------------- spin unlock -----------------*/ + ret = rcar_i2c_bus_barrier(priv); + if (ret < 0) + goto out; - ret = -EINVAL; for (i = 0; i < num; i++) { /* This HW can't send STOP after address phase */ if (msgs[i].len == 0) { @@ -567,9 +428,6 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap, break; } - /*-------------- spin lock -----------------*/ - spin_lock_irqsave(&priv->lock, flags); - /* init each data */ priv->msg = &msgs[i]; priv->pos = 0; @@ -577,21 +435,11 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap, if (priv->msg == &msgs[num - 1]) rcar_i2c_flags_set(priv, ID_LAST_MSG); - /* start send/recv */ - if (rcar_i2c_is_recv(priv)) - ret = rcar_i2c_recv(priv); - else - ret = rcar_i2c_send(priv); - - spin_unlock_irqrestore(&priv->lock, flags); - /*-------------- spin unlock -----------------*/ + ret = rcar_i2c_prepare_msg(priv); if (ret < 0) break; - /* - * wait result - */ timeout = wait_event_timeout(priv->wait, rcar_i2c_flags_has(priv, ID_DONE), 5 * HZ); @@ -600,9 +448,6 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap, break; } - /* - * error handling - */ if (rcar_i2c_flags_has(priv, ID_NACK)) { ret = -ENXIO; break; @@ -620,7 +465,7 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap, ret = i + 1; /* The number of transfer */ } - +out: pm_runtime_put(dev); if (ret < 0 && ret != -ENXIO) @@ -646,6 +491,9 @@ static const struct of_device_id rcar_i2c_dt_ids[] = { { .compatible = "renesas,i2c-r8a7779", .data = (void *)I2C_RCAR_GEN1 }, { .compatible = "renesas,i2c-r8a7790", .data = (void *)I2C_RCAR_GEN2 }, { .compatible = "renesas,i2c-r8a7791", .data = (void *)I2C_RCAR_GEN2 }, + { .compatible = "renesas,i2c-r8a7792", .data = (void *)I2C_RCAR_GEN2 }, + { .compatible = "renesas,i2c-r8a7793", .data = (void *)I2C_RCAR_GEN2 }, + { .compatible = "renesas,i2c-r8a7794", .data = (void *)I2C_RCAR_GEN2 }, {}, }; MODULE_DEVICE_TABLE(of, rcar_i2c_dt_ids); @@ -658,13 +506,11 @@ static int rcar_i2c_probe(struct platform_device *pdev) struct resource *res; struct device *dev = &pdev->dev; u32 bus_speed; - int ret; + int irq, ret; priv = devm_kzalloc(dev, sizeof(struct rcar_i2c_priv), GFP_KERNEL); - if (!priv) { - dev_err(dev, "no mem for private data\n"); + if (!priv) return -ENOMEM; - } priv->clk = devm_clk_get(dev, NULL); if (IS_ERR(priv->clk)) { @@ -692,9 +538,8 @@ static int rcar_i2c_probe(struct platform_device *pdev) if (IS_ERR(priv->io)) return PTR_ERR(priv->io); - priv->irq = platform_get_irq(pdev, 0); + irq = platform_get_irq(pdev, 0); init_waitqueue_head(&priv->wait); - spin_lock_init(&priv->lock); adap = &priv->adap; adap->nr = pdev->id; @@ -706,10 +551,10 @@ static int rcar_i2c_probe(struct platform_device *pdev) i2c_set_adapdata(adap, priv); strlcpy(adap->name, pdev->name, sizeof(adap->name)); - ret = devm_request_irq(dev, priv->irq, rcar_i2c_irq, 0, + ret = devm_request_irq(dev, irq, rcar_i2c_irq, 0, dev_name(dev), priv); if (ret < 0) { - dev_err(dev, "cannot get irq %d\n", priv->irq); + dev_err(dev, "cannot get irq %d\n", irq); return ret; } @@ -759,6 +604,6 @@ static struct platform_driver rcar_i2c_driver = { module_platform_driver(rcar_i2c_driver); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("Renesas R-Car I2C bus driver"); MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"); diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c index 9e1f8bacfb39..af3b3d032a9f 100644 --- a/drivers/i2c/busses/i2c-riic.c +++ b/drivers/i2c/busses/i2c-riic.c @@ -404,7 +404,7 @@ static int riic_i2c_remove(struct platform_device *pdev) return 0; } -static struct of_device_id riic_i2c_dt_ids[] = { +static const struct of_device_id riic_i2c_dt_ids[] = { { .compatible = "renesas,riic-rz" }, { /* Sentinel */ }, }; diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index bb3a9964f7e0..e828a1dba0e5 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -1114,16 +1114,12 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) } i2c = devm_kzalloc(&pdev->dev, sizeof(struct s3c24xx_i2c), GFP_KERNEL); - if (!i2c) { - dev_err(&pdev->dev, "no memory for state\n"); + if (!i2c) return -ENOMEM; - } i2c->pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); - if (!i2c->pdata) { - dev_err(&pdev->dev, "no memory for platform data\n"); + if (!i2c->pdata) return -ENOMEM; - } i2c->quirks = s3c24xx_get_device_quirks(pdev); if (pdata) diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 1d79585ba4b3..8b5e79cb4468 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -32,6 +32,7 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/slab.h> +#include <linux/of_device.h> #include <linux/i2c/i2c-sh_mobile.h> /* Transmit operation: */ @@ -139,6 +140,10 @@ struct sh_mobile_i2c_data { bool send_stop; }; +struct sh_mobile_dt_config { + int clks_per_count; +}; + #define IIC_FLAG_HAS_ICIC67 (1 << 0) #define STANDARD_MODE 100000 @@ -194,7 +199,7 @@ static void iic_set_clr(struct sh_mobile_i2c_data *pd, int offs, iic_wr(pd, offs, (iic_rd(pd, offs) | set) & ~clr); } -static u32 sh_mobile_i2c_iccl(unsigned long count_khz, u32 tLOW, u32 tf, int offset) +static u32 sh_mobile_i2c_iccl(unsigned long count_khz, u32 tLOW, u32 tf) { /* * Conditional expression: @@ -206,10 +211,10 @@ static u32 sh_mobile_i2c_iccl(unsigned long count_khz, u32 tLOW, u32 tf, int off * account the fall time of SCL signal (tf). Default tf value * should be 0.3 us, for safety. */ - return (((count_khz * (tLOW + tf)) + 5000) / 10000) + offset; + return (((count_khz * (tLOW + tf)) + 5000) / 10000); } -static u32 sh_mobile_i2c_icch(unsigned long count_khz, u32 tHIGH, u32 tf, int offset) +static u32 sh_mobile_i2c_icch(unsigned long count_khz, u32 tHIGH, u32 tf) { /* * Conditional expression: @@ -225,52 +230,58 @@ static u32 sh_mobile_i2c_icch(unsigned long count_khz, u32 tHIGH, u32 tf, int of * to take into account the fall time of SDA signal (tf) at START * condition, in order to meet both tHIGH and tHD;STA specs. */ - return (((count_khz * (tHIGH + tf)) + 5000) / 10000) + offset; + return (((count_khz * (tHIGH + tf)) + 5000) / 10000); } -static void sh_mobile_i2c_init(struct sh_mobile_i2c_data *pd) +static int sh_mobile_i2c_init(struct sh_mobile_i2c_data *pd) { unsigned long i2c_clk_khz; u32 tHIGH, tLOW, tf; - int offset; + uint16_t max_val; /* Get clock rate after clock is enabled */ clk_prepare_enable(pd->clk); i2c_clk_khz = clk_get_rate(pd->clk) / 1000; + clk_disable_unprepare(pd->clk); i2c_clk_khz /= pd->clks_per_count; if (pd->bus_speed == STANDARD_MODE) { tLOW = 47; /* tLOW = 4.7 us */ tHIGH = 40; /* tHD;STA = tHIGH = 4.0 us */ tf = 3; /* tf = 0.3 us */ - offset = 0; /* No offset */ } else if (pd->bus_speed == FAST_MODE) { tLOW = 13; /* tLOW = 1.3 us */ tHIGH = 6; /* tHD;STA = tHIGH = 0.6 us */ tf = 3; /* tf = 0.3 us */ - offset = 0; /* No offset */ } else { dev_err(pd->dev, "unrecognized bus speed %lu Hz\n", pd->bus_speed); - goto out; + return -EINVAL; + } + + pd->iccl = sh_mobile_i2c_iccl(i2c_clk_khz, tLOW, tf); + pd->icch = sh_mobile_i2c_icch(i2c_clk_khz, tHIGH, tf); + + max_val = pd->flags & IIC_FLAG_HAS_ICIC67 ? 0x1ff : 0xff; + if (pd->iccl > max_val || pd->icch > max_val) { + dev_err(pd->dev, "timing values out of range: L/H=0x%x/0x%x\n", + pd->iccl, pd->icch); + return -EINVAL; } - pd->iccl = sh_mobile_i2c_iccl(i2c_clk_khz, tLOW, tf, offset); /* one more bit of ICCL in ICIC */ - if ((pd->iccl > 0xff) && (pd->flags & IIC_FLAG_HAS_ICIC67)) + if (pd->iccl & 0x100) pd->icic |= ICIC_ICCLB8; else pd->icic &= ~ICIC_ICCLB8; - pd->icch = sh_mobile_i2c_icch(i2c_clk_khz, tHIGH, tf, offset); /* one more bit of ICCH in ICIC */ - if ((pd->icch > 0xff) && (pd->flags & IIC_FLAG_HAS_ICIC67)) + if (pd->icch & 0x100) pd->icic |= ICIC_ICCHB8; else pd->icic &= ~ICIC_ICCHB8; -out: - clk_disable_unprepare(pd->clk); + return 0; } static void activate_ch(struct sh_mobile_i2c_data *pd) @@ -316,7 +327,7 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd, switch (op) { case OP_START: /* issue start and trigger DTE interrupt */ - iic_wr(pd, ICCR, 0x94); + iic_wr(pd, ICCR, ICCR_ICE | ICCR_TRS | ICCR_BBSY); break; case OP_TX_FIRST: /* disable DTE interrupt and write data */ iic_wr(pd, ICIC, ICIC_WAITE | ICIC_ALE | ICIC_TACKE); @@ -327,10 +338,11 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd, break; case OP_TX_STOP: /* write data and issue a stop afterwards */ iic_wr(pd, ICDR, data); - iic_wr(pd, ICCR, pd->send_stop ? 0x90 : 0x94); + iic_wr(pd, ICCR, pd->send_stop ? ICCR_ICE | ICCR_TRS + : ICCR_ICE | ICCR_TRS | ICCR_BBSY); break; case OP_TX_TO_RX: /* select read mode */ - iic_wr(pd, ICCR, 0x81); + iic_wr(pd, ICCR, ICCR_ICE | ICCR_SCP); break; case OP_RX: /* just read data */ ret = iic_rd(pd, ICDR); @@ -338,13 +350,13 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd, case OP_RX_STOP: /* enable DTE interrupt, issue stop */ iic_wr(pd, ICIC, ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE); - iic_wr(pd, ICCR, 0xc0); + iic_wr(pd, ICCR, ICCR_ICE | ICCR_RACK); break; case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */ iic_wr(pd, ICIC, ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE); ret = iic_rd(pd, ICDR); - iic_wr(pd, ICCR, 0xc0); + iic_wr(pd, ICCR, ICCR_ICE | ICCR_RACK); break; } @@ -479,7 +491,7 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg, { if (usr_msg->len == 0 && (usr_msg->flags & I2C_M_RD)) { dev_err(pd->dev, "Unsupported zero length i2c read\n"); - return -EIO; + return -EOPNOTSUPP; } if (do_init) { @@ -514,17 +526,12 @@ static int poll_dte(struct sh_mobile_i2c_data *pd) break; if (val & ICSR_TACK) - return -EIO; + return -ENXIO; udelay(10); } - if (!i) { - dev_warn(pd->dev, "Timeout polling for DTE!\n"); - return -ETIMEDOUT; - } - - return 0; + return i ? 0 : -ETIMEDOUT; } static int poll_busy(struct sh_mobile_i2c_data *pd) @@ -542,20 +549,18 @@ static int poll_busy(struct sh_mobile_i2c_data *pd) */ if (!(val & ICSR_BUSY)) { /* handle missing acknowledge and arbitration lost */ - if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) - return -EIO; + val |= pd->sr; + if (val & ICSR_TACK) + return -ENXIO; + if (val & ICSR_AL) + return -EAGAIN; break; } udelay(10); } - if (!i) { - dev_err(pd->dev, "Polling timed out\n"); - return -ETIMEDOUT; - } - - return 0; + return i ? 0 : -ETIMEDOUT; } static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter, @@ -617,42 +622,44 @@ static struct i2c_algorithm sh_mobile_i2c_algorithm = { .master_xfer = sh_mobile_i2c_xfer, }; -static int sh_mobile_i2c_hook_irqs(struct platform_device *dev, int hook) +static const struct sh_mobile_dt_config default_dt_config = { + .clks_per_count = 1, +}; + +static const struct sh_mobile_dt_config rcar_gen2_dt_config = { + .clks_per_count = 2, +}; + +static const struct of_device_id sh_mobile_i2c_dt_ids[] = { + { .compatible = "renesas,rmobile-iic", .data = &default_dt_config }, + { .compatible = "renesas,iic-r8a7790", .data = &rcar_gen2_dt_config }, + { .compatible = "renesas,iic-r8a7791", .data = &rcar_gen2_dt_config }, + { .compatible = "renesas,iic-r8a7792", .data = &rcar_gen2_dt_config }, + { .compatible = "renesas,iic-r8a7793", .data = &rcar_gen2_dt_config }, + { .compatible = "renesas,iic-r8a7794", .data = &rcar_gen2_dt_config }, + {}, +}; +MODULE_DEVICE_TABLE(of, sh_mobile_i2c_dt_ids); + +static int sh_mobile_i2c_hook_irqs(struct platform_device *dev) { struct resource *res; - int ret = -ENXIO; - int n, k = 0; + resource_size_t n; + int k = 0, ret; while ((res = platform_get_resource(dev, IORESOURCE_IRQ, k))) { - for (n = res->start; hook && n <= res->end; n++) { - if (request_irq(n, sh_mobile_i2c_isr, 0, - dev_name(&dev->dev), dev)) { - for (n--; n >= res->start; n--) - free_irq(n, dev); - - goto rollback; + for (n = res->start; n <= res->end; n++) { + ret = devm_request_irq(&dev->dev, n, sh_mobile_i2c_isr, + 0, dev_name(&dev->dev), dev); + if (ret) { + dev_err(&dev->dev, "cannot request IRQ %pa\n", &n); + return ret; } } k++; } - if (hook) - return k > 0 ? 0 : -ENOENT; - - ret = 0; - - rollback: - k--; - - while (k >= 0) { - res = platform_get_resource(dev, IORESOURCE_IRQ, k); - for (n = res->start; n <= res->end; n++) - free_irq(n, dev); - - k--; - } - - return ret; + return k > 0 ? 0 : -ENOENT; } static int sh_mobile_i2c_probe(struct platform_device *dev) @@ -661,62 +668,64 @@ static int sh_mobile_i2c_probe(struct platform_device *dev) struct sh_mobile_i2c_data *pd; struct i2c_adapter *adap; struct resource *res; - int size; int ret; + u32 bus_speed; - pd = kzalloc(sizeof(struct sh_mobile_i2c_data), GFP_KERNEL); - if (pd == NULL) { - dev_err(&dev->dev, "cannot allocate private data\n"); + pd = devm_kzalloc(&dev->dev, sizeof(struct sh_mobile_i2c_data), GFP_KERNEL); + if (!pd) return -ENOMEM; - } - pd->clk = clk_get(&dev->dev, NULL); + pd->clk = devm_clk_get(&dev->dev, NULL); if (IS_ERR(pd->clk)) { dev_err(&dev->dev, "cannot get clock\n"); - ret = PTR_ERR(pd->clk); - goto err; + return PTR_ERR(pd->clk); } - ret = sh_mobile_i2c_hook_irqs(dev, 1); - if (ret) { - dev_err(&dev->dev, "cannot request IRQ\n"); - goto err_clk; - } + ret = sh_mobile_i2c_hook_irqs(dev); + if (ret) + return ret; pd->dev = &dev->dev; platform_set_drvdata(dev, pd); res = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&dev->dev, "cannot find IO resource\n"); - ret = -ENOENT; - goto err_irq; - } - - size = resource_size(res); - pd->reg = ioremap(res->start, size); - if (pd->reg == NULL) { - dev_err(&dev->dev, "cannot map IO\n"); - ret = -ENXIO; - goto err_irq; - } + pd->reg = devm_ioremap_resource(&dev->dev, res); + if (IS_ERR(pd->reg)) + return PTR_ERR(pd->reg); /* Use platform data bus speed or STANDARD_MODE */ - pd->bus_speed = STANDARD_MODE; - if (pdata && pdata->bus_speed) - pd->bus_speed = pdata->bus_speed; + ret = of_property_read_u32(dev->dev.of_node, "clock-frequency", &bus_speed); + pd->bus_speed = ret ? STANDARD_MODE : bus_speed; + pd->clks_per_count = 1; - if (pdata && pdata->clks_per_count) - pd->clks_per_count = pdata->clks_per_count; + + if (dev->dev.of_node) { + const struct of_device_id *match; + + match = of_match_device(sh_mobile_i2c_dt_ids, &dev->dev); + if (match) { + const struct sh_mobile_dt_config *config; + + config = match->data; + pd->clks_per_count = config->clks_per_count; + } + } else { + if (pdata && pdata->bus_speed) + pd->bus_speed = pdata->bus_speed; + if (pdata && pdata->clks_per_count) + pd->clks_per_count = pdata->clks_per_count; + } /* The IIC blocks on SH-Mobile ARM processors * come with two new bits in ICIC. */ - if (size > 0x17) + if (resource_size(res) > 0x17) pd->flags |= IIC_FLAG_HAS_ICIC67; - sh_mobile_i2c_init(pd); + ret = sh_mobile_i2c_init(pd); + if (ret) + return ret; /* Enable Runtime PM for this device. * @@ -750,24 +759,14 @@ static int sh_mobile_i2c_probe(struct platform_device *dev) ret = i2c_add_numbered_adapter(adap); if (ret < 0) { dev_err(&dev->dev, "cannot add numbered adapter\n"); - goto err_all; + return ret; } dev_info(&dev->dev, - "I2C adapter %d with bus speed %lu Hz (L/H=%x/%x)\n", + "I2C adapter %d with bus speed %lu Hz (L/H=0x%x/0x%x)\n", adap->nr, pd->bus_speed, pd->iccl, pd->icch); return 0; - - err_all: - iounmap(pd->reg); - err_irq: - sh_mobile_i2c_hook_irqs(dev, 0); - err_clk: - clk_put(pd->clk); - err: - kfree(pd); - return ret; } static int sh_mobile_i2c_remove(struct platform_device *dev) @@ -775,11 +774,7 @@ static int sh_mobile_i2c_remove(struct platform_device *dev) struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev); i2c_del_adapter(&pd->adap); - iounmap(pd->reg); - sh_mobile_i2c_hook_irqs(dev, 0); - clk_put(pd->clk); pm_runtime_disable(&dev->dev); - kfree(pd); return 0; } @@ -800,12 +795,6 @@ static const struct dev_pm_ops sh_mobile_i2c_dev_pm_ops = { .runtime_resume = sh_mobile_i2c_runtime_nop, }; -static const struct of_device_id sh_mobile_i2c_dt_ids[] = { - { .compatible = "renesas,rmobile-iic", }, - {}, -}; -MODULE_DEVICE_TABLE(of, sh_mobile_i2c_dt_ids); - static struct platform_driver sh_mobile_i2c_driver = { .driver = { .name = "i2c-sh_mobile", diff --git a/drivers/i2c/busses/i2c-simtec.c b/drivers/i2c/busses/i2c-simtec.c index 294c80f21d65..964e5c6f84ab 100644 --- a/drivers/i2c/busses/i2c-simtec.c +++ b/drivers/i2c/busses/i2c-simtec.c @@ -77,10 +77,8 @@ static int simtec_i2c_probe(struct platform_device *dev) int ret; pd = kzalloc(sizeof(struct simtec_i2c_data), GFP_KERNEL); - if (pd == NULL) { - dev_err(&dev->dev, "cannot allocate private data\n"); + if (pd == NULL) return -ENOMEM; - } platform_set_drvdata(dev, pd); diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c index 8e3be7ed0586..a3216defc1d3 100644 --- a/drivers/i2c/busses/i2c-sirf.c +++ b/drivers/i2c/busses/i2c-sirf.c @@ -307,7 +307,6 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev) siic = devm_kzalloc(&pdev->dev, sizeof(*siic), GFP_KERNEL); if (!siic) { - dev_err(&pdev->dev, "Can't allocate driver data\n"); err = -ENOMEM; goto out; } diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c index 872016196ef3..95b947670386 100644 --- a/drivers/i2c/busses/i2c-st.c +++ b/drivers/i2c/busses/i2c-st.c @@ -847,7 +847,7 @@ static int st_i2c_remove(struct platform_device *pdev) return 0; } -static struct of_device_id st_i2c_match[] = { +static const struct of_device_id st_i2c_match[] = { { .compatible = "st,comms-ssc-i2c", }, { .compatible = "st,comms-ssc4-i2c", }, {}, diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c index 29b1fb778943..fefb1c19ec1d 100644 --- a/drivers/i2c/busses/i2c-stu300.c +++ b/drivers/i2c/busses/i2c-stu300.c @@ -868,10 +868,8 @@ static int stu300_probe(struct platform_device *pdev) int ret = 0; dev = devm_kzalloc(&pdev->dev, sizeof(struct stu300_dev), GFP_KERNEL); - if (!dev) { - dev_err(&pdev->dev, "could not allocate device struct\n"); + if (!dev) return -ENOMEM; - } bus_nr = pdev->id; dev->clk = devm_clk_get(&pdev->dev, NULL); diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 00f04cb5b4eb..f1bb2fc06791 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -732,10 +732,8 @@ static int tegra_i2c_probe(struct platform_device *pdev) } i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL); - if (!i2c_dev) { - dev_err(&pdev->dev, "Could not allocate struct tegra_i2c_dev"); + if (!i2c_dev) return -ENOMEM; - } i2c_dev->base = base; i2c_dev->div_clk = div_clk; diff --git a/drivers/i2c/busses/i2c-wmt.c b/drivers/i2c/busses/i2c-wmt.c index 2c8a3e4f9008..f80a38c2072c 100644 --- a/drivers/i2c/busses/i2c-wmt.c +++ b/drivers/i2c/busses/i2c-wmt.c @@ -379,10 +379,8 @@ static int wmt_i2c_probe(struct platform_device *pdev) u32 clk_rate; i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL); - if (!i2c_dev) { - dev_err(&pdev->dev, "device memory allocation failed\n"); + if (!i2c_dev) return -ENOMEM; - } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); i2c_dev->base = devm_ioremap_resource(&pdev->dev, res); @@ -454,7 +452,7 @@ static int wmt_i2c_remove(struct platform_device *pdev) return 0; } -static struct of_device_id wmt_i2c_dt_ids[] = { +static const struct of_device_id wmt_i2c_dt_ids[] = { { .compatible = "wm,wm8505-i2c" }, { /* Sentinel */ }, }; diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index cb66f9586f76..ff3f5747e43b 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -431,10 +431,8 @@ static struct scx200_acb_iface *scx200_create_iface(const char *text, struct i2c_adapter *adapter; iface = kzalloc(sizeof(*iface), GFP_KERNEL); - if (!iface) { - pr_err("can't allocate memory\n"); + if (!iface) return NULL; - } adapter = &iface->adapter; i2c_set_adapdata(adapter, iface); |