diff options
Diffstat (limited to 'drivers/i2c/busses')
| -rw-r--r-- | drivers/i2c/busses/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-bcm2835.c | 21 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-master.c | 4 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-i801.c | 1 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-sirf.c | 4 |
5 files changed, 27 insertions, 5 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index a9805c7cb305..e2954fb86d65 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -123,8 +123,10 @@ config I2C_I801 Wildcat Point (PCH) Wildcat Point-LP (PCH) BayTrail (SOC) + Braswell (SOC) Sunrise Point-H (PCH) Sunrise Point-LP (PCH) + Kaby Lake-H (PCH) DNV (SOC) Broxton (SOC) Lewisburg (PCH) diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c index cd07a69e2e93..44deae78913e 100644 --- a/drivers/i2c/busses/i2c-bcm2835.c +++ b/drivers/i2c/busses/i2c-bcm2835.c @@ -50,6 +50,9 @@ #define BCM2835_I2C_S_CLKT BIT(9) #define BCM2835_I2C_S_LEN BIT(10) /* Fake bit for SW error reporting */ +#define BCM2835_I2C_FEDL_SHIFT 16 +#define BCM2835_I2C_REDL_SHIFT 0 + #define BCM2835_I2C_CDIV_MIN 0x0002 #define BCM2835_I2C_CDIV_MAX 0xFFFE @@ -81,7 +84,7 @@ static inline u32 bcm2835_i2c_readl(struct bcm2835_i2c_dev *i2c_dev, u32 reg) static int bcm2835_i2c_set_divider(struct bcm2835_i2c_dev *i2c_dev) { - u32 divider; + u32 divider, redl, fedl; divider = DIV_ROUND_UP(clk_get_rate(i2c_dev->clk), i2c_dev->bus_clk_rate); @@ -100,6 +103,22 @@ static int bcm2835_i2c_set_divider(struct bcm2835_i2c_dev *i2c_dev) bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DIV, divider); + /* + * Number of core clocks to wait after falling edge before + * outputting the next data bit. Note that both FEDL and REDL + * can't be greater than CDIV/2. + */ + fedl = max(divider / 16, 1u); + + /* + * Number of core clocks to wait after rising edge before + * sampling the next incoming data bit. + */ + redl = max(divider / 4, 1u); + + bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DEL, + (fedl << BCM2835_I2C_FEDL_SHIFT) | + (redl << BCM2835_I2C_REDL_SHIFT)); return 0; } diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c index ae691884d071..05732531829f 100644 --- a/drivers/i2c/busses/i2c-designware-master.c +++ b/drivers/i2c/busses/i2c-designware-master.c @@ -209,7 +209,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev) i2c_dw_disable_int(dev); /* Enable the adapter */ - __i2c_dw_enable(dev, true); + __i2c_dw_enable_and_wait(dev, true); /* Clear and enable interrupts */ dw_readl(dev, DW_IC_CLR_INTR); @@ -644,7 +644,7 @@ static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev) gpio = devm_gpiod_get(dev->dev, "scl", GPIOD_OUT_HIGH); if (IS_ERR(gpio)) { r = PTR_ERR(gpio); - if (r == -ENOENT) + if (r == -ENOENT || r == -ENOSYS) return 0; return r; } diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 8eac00efadc1..692b34125866 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -58,6 +58,7 @@ * Wildcat Point (PCH) 0x8ca2 32 hard yes yes yes * Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes * BayTrail (SOC) 0x0f12 32 hard yes yes yes + * Braswell (SOC) 0x2292 32 hard yes yes yes * Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes * Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes * DNV (SOC) 0x19df 32 hard yes yes yes diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c index 2fd8b6d00391..87197ece0f90 100644 --- a/drivers/i2c/busses/i2c-sirf.c +++ b/drivers/i2c/busses/i2c-sirf.c @@ -341,7 +341,7 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, adap); init_completion(&siic->done); - /* Controller Initalisation */ + /* Controller initialisation */ writel(SIRFSOC_I2C_RESET, siic->base + SIRFSOC_I2C_CTRL); while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET) @@ -369,7 +369,7 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev) * but they start to affect the speed when clock is set to faster * frequencies. * Through the actual tests, use the different user_div value(which - * in the divider formular 'Fio / (Fi2c * user_div)') to adapt + * in the divider formula 'Fio / (Fi2c * user_div)') to adapt * the different ranges of i2c bus clock frequency, to make the SCL * more accurate. */ |