diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-nomadik.c')
-rw-r--r-- | drivers/i2c/busses/i2c-nomadik.c | 89 |
1 files changed, 46 insertions, 43 deletions
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index b228e09c5d05..ce4fd801a8c2 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -63,11 +63,11 @@ /* Master controller (MCR) register */ #define I2C_MCR_OP (0x1 << 0) /* Operation */ #define I2C_MCR_A7 (0x7f << 1) /* 7-bit address */ -#define I2C_MCR_EA10 (0x7 << 8) /* 10-bit Extended address */ +#define I2C_MCR_EA10 (0x7 << 8) /* 10-bit Extended address */ #define I2C_MCR_SB (0x1 << 11) /* Extended address */ #define I2C_MCR_AM (0x3 << 12) /* Address type */ -#define I2C_MCR_STOP (0x1 << 14) /* Stop condition */ -#define I2C_MCR_LENGTH (0x7ff << 15) /* Transaction length */ +#define I2C_MCR_STOP (0x1 << 14) /* Stop condition */ +#define I2C_MCR_LENGTH (0x7ff << 15) /* Transaction length */ /* Status register (SR) */ #define I2C_SR_OP (0x3 << 0) /* Operation */ @@ -77,7 +77,7 @@ #define I2C_SR_LENGTH (0x7ff << 9) /* Transfer length */ /* Interrupt mask set/clear (IMSCR) bits */ -#define I2C_IT_TXFE (0x1 << 0) +#define I2C_IT_TXFE (0x1 << 0) #define I2C_IT_TXFNE (0x1 << 1) #define I2C_IT_TXFF (0x1 << 2) #define I2C_IT_TXFOVR (0x1 << 3) @@ -135,31 +135,31 @@ struct i2c_nmk_client { }; /** - * struct nmk_i2c_dev - private data structure of the controller - * @pdev: parent platform device - * @adap: corresponding I2C adapter - * @irq: interrupt line for the controller - * @virtbase: virtual io memory area - * @clk: hardware i2c block clock - * @cfg: machine provided controller configuration - * @cli: holder of client specific data - * @stop: stop condition - * @xfer_complete: acknowledge completion for a I2C message - * @result: controller propogated result - * @regulator: pointer to i2c regulator - * @busy: Busy doing transfer + * struct nmk_i2c_dev - private data structure of the controller. + * @pdev: parent platform device. + * @adap: corresponding I2C adapter. + * @irq: interrupt line for the controller. + * @virtbase: virtual io memory area. + * @clk: hardware i2c block clock. + * @cfg: machine provided controller configuration. + * @cli: holder of client specific data. + * @stop: stop condition. + * @xfer_complete: acknowledge completion for a I2C message. + * @result: controller propogated result. + * @regulator: pointer to i2c regulator. + * @busy: Busy doing transfer. */ struct nmk_i2c_dev { struct platform_device *pdev; - struct i2c_adapter adap; - int irq; + struct i2c_adapter adap; + int irq; void __iomem *virtbase; struct clk *clk; struct nmk_i2c_controller cfg; struct i2c_nmk_client cli; - int stop; + int stop; struct completion xfer_complete; - int result; + int result; struct regulator *regulator; bool busy; }; @@ -217,8 +217,9 @@ static int flush_i2c_fifo(struct nmk_i2c_dev *dev) } } - dev_err(&dev->pdev->dev, "flushing operation timed out " - "giving up after %d attempts", LOOP_ATTEMPTS); + dev_err(&dev->pdev->dev, + "flushing operation timed out giving up after %d attempts", + LOOP_ATTEMPTS); return -ETIMEDOUT; } @@ -270,7 +271,7 @@ exit: } /* enable peripheral, master mode operation */ -#define DEFAULT_I2C_REG_CR ((1 << 1) | I2C_CR_PE) +#define DEFAULT_I2C_REG_CR ((1 << 1) | I2C_CR_PE) /** * load_i2c_mcr_reg() - load the MCR register @@ -363,8 +364,8 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev) * and high speed (up to 3.4 Mb/s) */ if (dev->cfg.sm > I2C_FREQ_MODE_FAST) { - dev_err(&dev->pdev->dev, "do not support this mode " - "defaulting to std. mode\n"); + dev_err(&dev->pdev->dev, + "do not support this mode defaulting to std. mode\n"); brcr2 = i2c_clk/(100000 * 2) & 0xffff; writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR); writel(I2C_FREQ_MODE_STANDARD << 4, @@ -423,7 +424,7 @@ static int read_i2c(struct nmk_i2c_dev *dev) if (timeout < 0) { dev_err(&dev->pdev->dev, - "wait_for_completion_timeout" + "wait_for_completion_timeout " "returned %d waiting for event\n", timeout); status = timeout; } @@ -556,8 +557,8 @@ static int nmk_i2c_xfer_one(struct nmk_i2c_dev *dev, u16 flags) if (((i2c_sr >> 2) & 0x3) == 0x3) { /* get the abort cause */ cause = (i2c_sr >> 4) & 0x7; - dev_err(&dev->pdev->dev, "%s\n", cause - >= ARRAY_SIZE(abort_causes) ? + dev_err(&dev->pdev->dev, "%s\n", + cause >= ARRAY_SIZE(abort_causes) ? "unknown reason" : abort_causes[cause]); } @@ -582,13 +583,13 @@ static int nmk_i2c_xfer_one(struct nmk_i2c_dev *dev, u16 flags) * * NOTE: * READ TRANSFER : We impose a restriction of the first message to be the - * index message for any read transaction. - * - a no index is coded as '0', - * - 2byte big endian index is coded as '3' - * !!! msg[0].buf holds the actual index. - * This is compatible with generic messages of smbus emulator - * that send a one byte index. - * eg. a I2C transation to read 2 bytes from index 0 + * index message for any read transaction. + * - a no index is coded as '0', + * - 2byte big endian index is coded as '3' + * !!! msg[0].buf holds the actual index. + * This is compatible with generic messages of smbus emulator + * that send a one byte index. + * eg. a I2C transation to read 2 bytes from index 0 * idx = 0; * msg[0].addr = client->addr; * msg[0].flags = 0x0; @@ -644,8 +645,8 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap, for (i = 0; i < num_msgs; i++) { if (unlikely(msgs[i].flags & I2C_M_TEN)) { - dev_err(&dev->pdev->dev, "10 bit addressing" - "not supported\n"); + dev_err(&dev->pdev->dev, + "10 bit addressing not supported\n"); status = -EINVAL; goto out; @@ -789,8 +790,9 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg) if (dev->cli.count) { dev->result = -EIO; - dev_err(&dev->pdev->dev, "%lu bytes still remain to be" - "xfered\n", dev->cli.count); + dev_err(&dev->pdev->dev, + "%lu bytes still remain to be xfered\n", + dev->cli.count); (void) init_hw(dev); } complete(&dev->xfer_complete); @@ -923,7 +925,7 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev) } if (request_mem_region(res->start, resource_size(res), - DRIVER_NAME "I/O region") == NULL) { + DRIVER_NAME "I/O region") == NULL) { ret = -EBUSY; goto err_no_region; } @@ -980,8 +982,9 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev) i2c_set_adapdata(adap, dev); - dev_info(&pdev->dev, "initialize %s on virtual " - "base %p\n", adap->name, dev->virtbase); + dev_info(&pdev->dev, + "initialize %s on virtual base %p\n", + adap->name, dev->virtbase); ret = i2c_add_numbered_adapter(adap); if (ret) { |