diff options
Diffstat (limited to 'drivers/hwmon')
| -rw-r--r-- | drivers/hwmon/pmbus/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus/tps53679.c | 120 |
2 files changed, 119 insertions, 5 deletions
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 21b916093c37..1909ce8fca53 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -210,10 +210,10 @@ config SENSORS_TPS40422 be called tps40422. config SENSORS_TPS53679 - tristate "TI TPS53679, TPS53688" + tristate "TI TPS53679, TPS53681, TPS53688" help If you say yes here you get hardware monitoring support for TI - TPS53679, TPS53688 + TPS53679, TPS53681, and TPS53688. This driver can also be built as a module. If so, the module will be called tps53679. diff --git a/drivers/hwmon/pmbus/tps53679.c b/drivers/hwmon/pmbus/tps53679.c index 2a6495424a87..eb6e2ea0e66c 100644 --- a/drivers/hwmon/pmbus/tps53679.c +++ b/drivers/hwmon/pmbus/tps53679.c @@ -6,6 +6,7 @@ * Copyright (c) 2017 Vadim Pasternak <vadimp@mellanox.com> */ +#include <linux/bits.h> #include <linux/err.h> #include <linux/i2c.h> #include <linux/init.h> @@ -15,7 +16,7 @@ #include "pmbus.h" enum chips { - tps53679, tps53688, + tps53679, tps53681, tps53688 }; #define TPS53679_PROT_VR12_5MV 0x01 /* VR12.0 mode, 5-mV DAC */ @@ -25,8 +26,14 @@ enum chips { #define TPS53679_PROT_VR13_5MV 0x07 /* VR13.0 mode, 5-mV DAC */ #define TPS53679_PAGE_NUM 2 -static int tps53679_identify(struct i2c_client *client, - struct pmbus_driver_info *info) +#define TPS53681_DEVICE_ID 0x81 + +#define TPS53681_PMBUS_REVISION 0x33 + +#define TPS53681_MFR_SPECIFIC_20 0xe4 /* Number of phases, per page */ + +static int tps53679_identify_mode(struct i2c_client *client, + struct pmbus_driver_info *info) { u8 vout_params; int i, ret; @@ -57,6 +64,99 @@ static int tps53679_identify(struct i2c_client *client, return 0; } +static int tps53679_identify_phases(struct i2c_client *client, + struct pmbus_driver_info *info) +{ + int ret; + + /* On TPS53681, only channel A provides per-phase output current */ + ret = pmbus_read_byte_data(client, 0, TPS53681_MFR_SPECIFIC_20); + if (ret < 0) + return ret; + info->phases[0] = (ret & 0x07) + 1; + + return 0; +} + +static int tps53679_identify_chip(struct i2c_client *client, + u8 revision, u16 id) +{ + u8 buf[I2C_SMBUS_BLOCK_MAX]; + int ret; + + ret = pmbus_read_byte_data(client, 0, PMBUS_REVISION); + if (ret < 0) + return ret; + if (ret != revision) { + dev_err(&client->dev, "Unexpected PMBus revision 0x%x\n", ret); + return -ENODEV; + } + + ret = i2c_smbus_read_block_data(client, PMBUS_IC_DEVICE_ID, buf); + if (ret < 0) + return ret; + if (ret != 1 || buf[0] != id) { + dev_err(&client->dev, "Unexpected device ID 0x%x\n", buf[0]); + return -ENODEV; + } + return 0; +} + +/* + * Common identification function for chips with multi-phase support. + * Since those chips have special configuration registers, we want to have + * some level of reassurance that we are really talking with the chip + * being probed. Check PMBus revision and chip ID. + */ +static int tps53679_identify_multiphase(struct i2c_client *client, + struct pmbus_driver_info *info, + int pmbus_rev, int device_id) +{ + int ret; + + ret = tps53679_identify_chip(client, pmbus_rev, device_id); + if (ret < 0) + return ret; + + ret = tps53679_identify_mode(client, info); + if (ret < 0) + return ret; + + return tps53679_identify_phases(client, info); +} + +static int tps53679_identify(struct i2c_client *client, + struct pmbus_driver_info *info) +{ + return tps53679_identify_mode(client, info); +} + +static int tps53681_identify(struct i2c_client *client, + struct pmbus_driver_info *info) +{ + return tps53679_identify_multiphase(client, info, + TPS53681_PMBUS_REVISION, + TPS53681_DEVICE_ID); +} + +static int tps53681_read_word_data(struct i2c_client *client, int page, + int phase, int reg) +{ + /* + * For reading the total output current (READ_IOUT) for all phases, + * the chip datasheet is a bit vague. It says "PHASE must be set to + * FFh to access all phases simultaneously. PHASE may also be set to + * 80h readack (!) the total phase current". + * Experiments show that the command does _not_ report the total + * current for all phases if the phase is set to 0xff. Instead, it + * appears to report the current of one of the phases. Override phase + * parameter with 0x80 when reading the total output current on page 0. + */ + if (reg == PMBUS_READ_IOUT && page == 0 && phase == 0xff) + return pmbus_read_word_data(client, page, 0x80, reg); + return -ENODATA; +} + static struct pmbus_driver_info tps53679_info = { .format[PSC_VOLTAGE_IN] = linear, .format[PSC_VOLTAGE_OUT] = vid, @@ -73,6 +173,12 @@ static struct pmbus_driver_info tps53679_info = { PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_POUT, + .pfunc[0] = PMBUS_HAVE_IOUT, + .pfunc[1] = PMBUS_HAVE_IOUT, + .pfunc[2] = PMBUS_HAVE_IOUT, + .pfunc[3] = PMBUS_HAVE_IOUT, + .pfunc[4] = PMBUS_HAVE_IOUT, + .pfunc[5] = PMBUS_HAVE_IOUT, }; static int tps53679_probe(struct i2c_client *client, @@ -97,6 +203,12 @@ static int tps53679_probe(struct i2c_client *client, info->pages = TPS53679_PAGE_NUM; info->identify = tps53679_identify; break; + case tps53681: + info->pages = TPS53679_PAGE_NUM; + info->phases[0] = 6; + info->identify = tps53681_identify; + info->read_word_data = tps53681_read_word_data; + break; default: return -ENODEV; } @@ -106,6 +218,7 @@ static int tps53679_probe(struct i2c_client *client, static const struct i2c_device_id tps53679_id[] = { {"tps53679", tps53679}, + {"tps53681", tps53681}, {"tps53688", tps53688}, {} }; @@ -114,6 +227,7 @@ MODULE_DEVICE_TABLE(i2c, tps53679_id); static const struct of_device_id __maybe_unused tps53679_of_match[] = { {.compatible = "ti,tps53679", .data = (void *)tps53679}, + {.compatible = "ti,tps53681", .data = (void *)tps53681}, {.compatible = "ti,tps53688", .data = (void *)tps53688}, {} }; |