diff options
Diffstat (limited to 'drivers/hwmon/lm90.c')
| -rw-r--r-- | drivers/hwmon/lm90.c | 40 |
1 files changed, 37 insertions, 3 deletions
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 2f94f9504804..708bf0e7e4ac 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -54,6 +54,9 @@ * and extended mode. They are mostly compatible with LM90 except for a data * format difference for the temperature value registers. * + * This driver also supports the SA56004 from Philips. This device is + * pin-compatible with the LM86, the ED/EDP parts are also address-compatible. + * * Since the LM90 was the first chipset supported by this driver, most * comments will refer to this chipset, but are actually general and * concern all supported chipsets, unless mentioned otherwise. @@ -96,13 +99,15 @@ * MAX6659 can have address 0x4c, 0x4d or 0x4e. * MAX6680 and MAX6681 can have address 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, * 0x4c, 0x4d or 0x4e. + * SA56004 can have address 0x48 through 0x4F. */ static const unsigned short normal_i2c[] = { - 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END }; + 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x48, 0x49, 0x4a, 0x4b, 0x4c, + 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680, - max6646, w83l771, max6696 }; + max6646, w83l771, max6696, sa56004 }; /* * The LM90 registers @@ -152,6 +157,10 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680, #define MAX6659_REG_R_LOCAL_EMERG 0x17 #define MAX6659_REG_W_LOCAL_EMERG 0x17 +/* SA56004 registers */ + +#define SA56004_REG_R_LOCAL_TEMPL 0x22 + #define LM90_DEF_CONVRATE_RVAL 6 /* Def conversion rate register value */ #define LM90_MAX_CONVRATE_MS 16000 /* Maximum conversion rate in ms */ @@ -192,6 +201,7 @@ static const struct i2c_device_id lm90_id[] = { { "max6696", max6696 }, { "nct1008", adt7461 }, { "w83l771", w83l771 }, + { "sa56004", sa56004 }, { } }; MODULE_DEVICE_TABLE(i2c, lm90_id); @@ -204,6 +214,8 @@ struct lm90_params { u16 alert_alarms; /* Which alarm bits trigger ALERT# */ /* Upper 8 bits for max6695/96 */ u8 max_convrate; /* Maximum conversion rate register value */ + u8 reg_local_ext; /* Local extension register if + LM90_HAVE_LOCAL_EXT is set*/ }; static const struct lm90_params lm90_params[] = { @@ -238,16 +250,19 @@ static const struct lm90_params lm90_params[] = { .flags = LM90_HAVE_LOCAL_EXT, .alert_alarms = 0x7c, .max_convrate = 6, + .reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL, }, [max6657] = { .flags = LM90_HAVE_LOCAL_EXT, .alert_alarms = 0x7c, .max_convrate = 8, + .reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL, }, [max6659] = { .flags = LM90_HAVE_LOCAL_EXT | LM90_HAVE_EMERGENCY, .alert_alarms = 0x7c, .max_convrate = 8, + .reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL, }, [max6680] = { .flags = LM90_HAVE_OFFSET, @@ -259,12 +274,20 @@ static const struct lm90_params lm90_params[] = { | LM90_HAVE_EMERGENCY_ALARM | LM90_HAVE_TEMP3, .alert_alarms = 0x187c, .max_convrate = 6, + .reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL, }, [w83l771] = { .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT, .alert_alarms = 0x7c, .max_convrate = 8, }, + [sa56004] = { + .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT + | LM90_HAVE_LOCAL_EXT, + .alert_alarms = 0x7b, + .max_convrate = 9, + .reg_local_ext = SA56004_REG_R_LOCAL_TEMPL, + }, }; /* @@ -286,6 +309,7 @@ struct lm90_data { u16 alert_alarms; /* Which alarm bits trigger ALERT# */ /* Upper 8 bits for max6695/96 */ u8 max_convrate; /* Maximum conversion rate */ + u8 reg_local_ext; /* local extension register offset */ /* registers values */ s8 temp8[8]; /* 0: local low limit @@ -454,7 +478,7 @@ static struct lm90_data *lm90_update_device(struct device *dev) if (data->flags & LM90_HAVE_LOCAL_EXT) { lm90_read16(client, LM90_REG_R_LOCAL_TEMP, - MAX6657_REG_R_LOCAL_TEMPL, + data->reg_local_ext, &data->temp11[4]); } else { if (lm90_read_reg(client, LM90_REG_R_LOCAL_TEMP, @@ -1263,6 +1287,11 @@ static int lm90_detect(struct i2c_client *new_client, name = "w83l771"; } } + } else + if (man_id == 0xA1) { /* NXP Semiconductor/Philips */ + if (chip_id == 0x00 && address >= 0x48 && address <= 0x4F) { + name = "sa56004"; + } } if (!name) { /* identification failed */ @@ -1372,6 +1401,11 @@ static int lm90_probe(struct i2c_client *new_client, /* Set maximum conversion rate */ data->max_convrate = lm90_params[data->kind].max_convrate; + if (data->flags & LM90_HAVE_LOCAL_EXT) { + data->reg_local_ext = lm90_params[data->kind].reg_local_ext; + WARN_ON(data->reg_local_ext == 0); + } + /* Initialize the LM90 chip */ lm90_init_client(new_client); |