summaryrefslogtreecommitdiff
path: root/drivers/hwmon/lis3lv02d.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/lis3lv02d.c')
-rw-r--r--drivers/hwmon/lis3lv02d.c231
1 files changed, 177 insertions, 54 deletions
diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
index cf5afb9a10ab..b2f2277cad3c 100644
--- a/drivers/hwmon/lis3lv02d.c
+++ b/drivers/hwmon/lis3lv02d.c
@@ -43,13 +43,30 @@
#define MDPS_POLL_INTERVAL 50
/*
* The sensor can also generate interrupts (DRDY) but it's pretty pointless
- * because their are generated even if the data do not change. So it's better
+ * because they are generated even if the data do not change. So it's better
* to keep the interrupt for the free-fall event. The values are updated at
* 40Hz (at the lowest frequency), but as it can be pretty time consuming on
* some low processor, we poll the sensor only at 20Hz... enough for the
* joystick.
*/
+#define LIS3_PWRON_DELAY_WAI_12B (5000)
+#define LIS3_PWRON_DELAY_WAI_8B (3000)
+
+/*
+ * LIS3LV02D spec says 1024 LSBs corresponds 1 G -> 1LSB is 1000/1024 mG
+ * LIS302D spec says: 18 mG / digit
+ * LIS3_ACCURACY is used to increase accuracy of the intermediate
+ * calculation results.
+ */
+#define LIS3_ACCURACY 1024
+/* Sensitivity values for -2G +2G scale */
+#define LIS3_SENSITIVITY_12B ((LIS3_ACCURACY * 1000) / 1024)
+#define LIS3_SENSITIVITY_8B (18 * LIS3_ACCURACY)
+
+#define LIS3_DEFAULT_FUZZ 3
+#define LIS3_DEFAULT_FLAT 3
+
struct lis3lv02d lis3_dev = {
.misc_wait = __WAIT_QUEUE_HEAD_INITIALIZER(lis3_dev.misc_wait),
};
@@ -65,7 +82,7 @@ static s16 lis3lv02d_read_8(struct lis3lv02d *lis3, int reg)
return lo;
}
-static s16 lis3lv02d_read_16(struct lis3lv02d *lis3, int reg)
+static s16 lis3lv02d_read_12(struct lis3lv02d *lis3, int reg)
{
u8 lo, hi;
@@ -102,16 +119,106 @@ static inline int lis3lv02d_get_axis(s8 axis, int hw_values[3])
static void lis3lv02d_get_xyz(struct lis3lv02d *lis3, int *x, int *y, int *z)
{
int position[3];
+ int i;
+ mutex_lock(&lis3->mutex);
position[0] = lis3->read_data(lis3, OUTX);
position[1] = lis3->read_data(lis3, OUTY);
position[2] = lis3->read_data(lis3, OUTZ);
+ mutex_unlock(&lis3->mutex);
+
+ for (i = 0; i < 3; i++)
+ position[i] = (position[i] * lis3->scale) / LIS3_ACCURACY;
*x = lis3lv02d_get_axis(lis3->ac.x, position);
*y = lis3lv02d_get_axis(lis3->ac.y, position);
*z = lis3lv02d_get_axis(lis3->ac.z, position);
}
+/* conversion btw sampling rate and the register values */
+static int lis3_12_rates[4] = {40, 160, 640, 2560};
+static int lis3_8_rates[2] = {100, 400};
+
+/* ODR is Output Data Rate */
+static int lis3lv02d_get_odr(void)
+{
+ u8 ctrl;
+ int shift;
+
+ lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl);
+ ctrl &= lis3_dev.odr_mask;
+ shift = ffs(lis3_dev.odr_mask) - 1;
+ return lis3_dev.odrs[(ctrl >> shift)];
+}
+
+static int lis3lv02d_set_odr(int rate)
+{
+ u8 ctrl;
+ int i, len, shift;
+
+ lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl);
+ ctrl &= ~lis3_dev.odr_mask;
+ len = 1 << hweight_long(lis3_dev.odr_mask); /* # of possible values */
+ shift = ffs(lis3_dev.odr_mask) - 1;
+
+ for (i = 0; i < len; i++)
+ if (lis3_dev.odrs[i] == rate) {
+ lis3_dev.write(&lis3_dev, CTRL_REG1,
+ ctrl | (i << shift));
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static int lis3lv02d_selftest(struct lis3lv02d *lis3, s16 results[3])
+{
+ u8 reg;
+ s16 x, y, z;
+ u8 selftest;
+ int ret;
+
+ mutex_lock(&lis3->mutex);
+ if (lis3_dev.whoami == WAI_12B)
+ selftest = CTRL1_ST;
+ else
+ selftest = CTRL1_STP;
+
+ lis3->read(lis3, CTRL_REG1, &reg);
+ lis3->write(lis3, CTRL_REG1, (reg | selftest));
+ msleep(lis3->pwron_delay / lis3lv02d_get_odr());
+
+ /* Read directly to avoid axis remap */
+ x = lis3->read_data(lis3, OUTX);
+ y = lis3->read_data(lis3, OUTY);
+ z = lis3->read_data(lis3, OUTZ);
+
+ /* back to normal settings */
+ lis3->write(lis3, CTRL_REG1, reg);
+ msleep(lis3->pwron_delay / lis3lv02d_get_odr());
+
+ results[0] = x - lis3->read_data(lis3, OUTX);
+ results[1] = y - lis3->read_data(lis3, OUTY);
+ results[2] = z - lis3->read_data(lis3, OUTZ);
+
+ ret = 0;
+ if (lis3->pdata) {
+ int i;
+ for (i = 0; i < 3; i++) {
+ /* Check against selftest acceptance limits */
+ if ((results[i] < lis3->pdata->st_min_limits[i]) ||
+ (results[i] > lis3->pdata->st_max_limits[i])) {
+ ret = -EIO;
+ goto fail;
+ }
+ }
+ }
+
+ /* test passed */
+fail:
+ mutex_unlock(&lis3->mutex);
+ return ret;
+}
+
void lis3lv02d_poweroff(struct lis3lv02d *lis3)
{
/* disable X,Y,Z axis and power down */
@@ -125,14 +232,19 @@ void lis3lv02d_poweron(struct lis3lv02d *lis3)
lis3->init(lis3);
+ /* LIS3 power on delay is quite long */
+ msleep(lis3->pwron_delay / lis3lv02d_get_odr());
+
/*
* Common configuration
- * BDU: LSB and MSB values are not updated until both have been read.
- * So the value read will always be correct.
+ * BDU: (12 bits sensors only) LSB and MSB values are not updated until
+ * both have been read. So the value read will always be correct.
*/
- lis3->read(lis3, CTRL_REG2, &reg);
- reg |= CTRL2_BDU;
- lis3->write(lis3, CTRL_REG2, reg);
+ if (lis3->whoami == WAI_12B) {
+ lis3->read(lis3, CTRL_REG2, &reg);
+ reg |= CTRL2_BDU;
+ lis3->write(lis3, CTRL_REG2, reg);
+ }
}
EXPORT_SYMBOL_GPL(lis3lv02d_poweron);
@@ -273,22 +385,17 @@ static void lis3lv02d_joystick_poll(struct input_polled_dev *pidev)
int x, y, z;
lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z);
- input_report_abs(pidev->input, ABS_X, x - lis3_dev.xcalib);
- input_report_abs(pidev->input, ABS_Y, y - lis3_dev.ycalib);
- input_report_abs(pidev->input, ABS_Z, z - lis3_dev.zcalib);
-}
-
-
-static inline void lis3lv02d_calibrate_joystick(void)
-{
- lis3lv02d_get_xyz(&lis3_dev,
- &lis3_dev.xcalib, &lis3_dev.ycalib, &lis3_dev.zcalib);
+ input_report_abs(pidev->input, ABS_X, x);
+ input_report_abs(pidev->input, ABS_Y, y);
+ input_report_abs(pidev->input, ABS_Z, z);
+ input_sync(pidev->input);
}
int lis3lv02d_joystick_enable(void)
{
struct input_dev *input_dev;
int err;
+ int max_val, fuzz, flat;
if (lis3_dev.idev)
return -EINVAL;
@@ -301,8 +408,6 @@ int lis3lv02d_joystick_enable(void)
lis3_dev.idev->poll_interval = MDPS_POLL_INTERVAL;
input_dev = lis3_dev.idev->input;
- lis3lv02d_calibrate_joystick();
-
input_dev->name = "ST LIS3LV02DL Accelerometer";
input_dev->phys = DRIVER_NAME "/input0";
input_dev->id.bustype = BUS_HOST;
@@ -310,9 +415,12 @@ int lis3lv02d_joystick_enable(void)
input_dev->dev.parent = &lis3_dev.pdev->dev;
set_bit(EV_ABS, input_dev->evbit);
- input_set_abs_params(input_dev, ABS_X, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3);
- input_set_abs_params(input_dev, ABS_Y, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3);
- input_set_abs_params(input_dev, ABS_Z, -lis3_dev.mdps_max_val, lis3_dev.mdps_max_val, 3, 3);
+ max_val = (lis3_dev.mdps_max_val * lis3_dev.scale) / LIS3_ACCURACY;
+ fuzz = (LIS3_DEFAULT_FUZZ * lis3_dev.scale) / LIS3_ACCURACY;
+ flat = (LIS3_DEFAULT_FLAT * lis3_dev.scale) / LIS3_ACCURACY;
+ input_set_abs_params(input_dev, ABS_X, -max_val, max_val, fuzz, flat);
+ input_set_abs_params(input_dev, ABS_Y, -max_val, max_val, fuzz, flat);
+ input_set_abs_params(input_dev, ABS_Z, -max_val, max_val, fuzz, flat);
err = input_register_polled_device(lis3_dev.idev);
if (err) {
@@ -332,11 +440,23 @@ void lis3lv02d_joystick_disable(void)
if (lis3_dev.irq)
misc_deregister(&lis3lv02d_misc_device);
input_unregister_polled_device(lis3_dev.idev);
+ input_free_polled_device(lis3_dev.idev);
lis3_dev.idev = NULL;
}
EXPORT_SYMBOL_GPL(lis3lv02d_joystick_disable);
/* Sysfs stuff */
+static ssize_t lis3lv02d_selftest_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int result;
+ s16 values[3];
+
+ result = lis3lv02d_selftest(&lis3_dev, values);
+ return sprintf(buf, "%s %d %d %d\n", result == 0 ? "OK" : "FAIL",
+ values[0], values[1], values[2]);
+}
+
static ssize_t lis3lv02d_position_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -346,41 +466,35 @@ static ssize_t lis3lv02d_position_show(struct device *dev,
return sprintf(buf, "(%d,%d,%d)\n", x, y, z);
}
-static ssize_t lis3lv02d_calibrate_show(struct device *dev,
- struct device_attribute *attr, char *buf)
+static ssize_t lis3lv02d_rate_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
- return sprintf(buf, "(%d,%d,%d)\n", lis3_dev.xcalib, lis3_dev.ycalib, lis3_dev.zcalib);
+ return sprintf(buf, "%d\n", lis3lv02d_get_odr());
}
-static ssize_t lis3lv02d_calibrate_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
+static ssize_t lis3lv02d_rate_set(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
{
- lis3lv02d_calibrate_joystick();
- return count;
-}
+ unsigned long rate;
-/* conversion btw sampling rate and the register values */
-static int lis3lv02dl_df_val[4] = {40, 160, 640, 2560};
-static ssize_t lis3lv02d_rate_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- u8 ctrl;
- int val;
+ if (strict_strtoul(buf, 0, &rate))
+ return -EINVAL;
- lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl);
- val = (ctrl & (CTRL1_DF0 | CTRL1_DF1)) >> 4;
- return sprintf(buf, "%d\n", lis3lv02dl_df_val[val]);
+ if (lis3lv02d_set_odr(rate))
+ return -EINVAL;
+
+ return count;
}
+static DEVICE_ATTR(selftest, S_IRUSR, lis3lv02d_selftest_show, NULL);
static DEVICE_ATTR(position, S_IRUGO, lis3lv02d_position_show, NULL);
-static DEVICE_ATTR(calibrate, S_IRUGO|S_IWUSR, lis3lv02d_calibrate_show,
- lis3lv02d_calibrate_store);
-static DEVICE_ATTR(rate, S_IRUGO, lis3lv02d_rate_show, NULL);
+static DEVICE_ATTR(rate, S_IRUGO | S_IWUSR, lis3lv02d_rate_show,
+ lis3lv02d_rate_set);
static struct attribute *lis3lv02d_attributes[] = {
+ &dev_attr_selftest.attr,
&dev_attr_position.attr,
- &dev_attr_calibrate.attr,
&dev_attr_rate.attr,
NULL
};
@@ -409,22 +523,30 @@ EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs);
/*
* Initialise the accelerometer and the various subsystems.
- * Should be rather independant of the bus system.
+ * Should be rather independent of the bus system.
*/
int lis3lv02d_init_device(struct lis3lv02d *dev)
{
dev->whoami = lis3lv02d_read_8(dev, WHO_AM_I);
switch (dev->whoami) {
- case LIS_DOUBLE_ID:
- printk(KERN_INFO DRIVER_NAME ": 2-byte sensor found\n");
- dev->read_data = lis3lv02d_read_16;
+ case WAI_12B:
+ printk(KERN_INFO DRIVER_NAME ": 12 bits sensor found\n");
+ dev->read_data = lis3lv02d_read_12;
dev->mdps_max_val = 2048;
+ dev->pwron_delay = LIS3_PWRON_DELAY_WAI_12B;
+ dev->odrs = lis3_12_rates;
+ dev->odr_mask = CTRL1_DF0 | CTRL1_DF1;
+ dev->scale = LIS3_SENSITIVITY_12B;
break;
- case LIS_SINGLE_ID:
- printk(KERN_INFO DRIVER_NAME ": 1-byte sensor found\n");
+ case WAI_8B:
+ printk(KERN_INFO DRIVER_NAME ": 8 bits sensor found\n");
dev->read_data = lis3lv02d_read_8;
dev->mdps_max_val = 128;
+ dev->pwron_delay = LIS3_PWRON_DELAY_WAI_8B;
+ dev->odrs = lis3_8_rates;
+ dev->odr_mask = CTRL1_DR;
+ dev->scale = LIS3_SENSITIVITY_8B;
break;
default:
printk(KERN_ERR DRIVER_NAME
@@ -432,6 +554,8 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
return -EINVAL;
}
+ mutex_init(&dev->mutex);
+
lis3lv02d_add_fs(dev);
lis3lv02d_poweron(dev);
@@ -443,7 +567,7 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
if (dev->pdata) {
struct lis3lv02d_platform_data *p = dev->pdata;
- if (p->click_flags && (dev->whoami == LIS_SINGLE_ID)) {
+ if (p->click_flags && (dev->whoami == WAI_8B)) {
dev->write(dev, CLICK_CFG, p->click_flags);
dev->write(dev, CLICK_TIMELIMIT, p->click_time_limit);
dev->write(dev, CLICK_LATENCY, p->click_latency);
@@ -454,7 +578,7 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
(p->click_thresh_y << 4));
}
- if (p->wakeup_flags && (dev->whoami == LIS_SINGLE_ID)) {
+ if (p->wakeup_flags && (dev->whoami == WAI_8B)) {
dev->write(dev, FF_WU_CFG_1, p->wakeup_flags);
dev->write(dev, FF_WU_THS_1, p->wakeup_thresh & 0x7f);
/* default to 2.5ms for now */
@@ -484,4 +608,3 @@ EXPORT_SYMBOL_GPL(lis3lv02d_init_device);
MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver");
MODULE_AUTHOR("Yan Burman, Eric Piel, Pavel Machek");
MODULE_LICENSE("GPL");
-
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 15:10:21 +0300