diff options
Diffstat (limited to 'drivers/hwmon/adm1026.c')
| -rw-r--r-- | drivers/hwmon/adm1026.c | 53 |
1 files changed, 27 insertions, 26 deletions
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c index ea09046e651d..3a6d9ef1c16c 100644 --- a/drivers/hwmon/adm1026.c +++ b/drivers/hwmon/adm1026.c @@ -49,14 +49,14 @@ static int gpio_fan[8] = { -1, -1, -1, -1, -1, -1, -1, -1 }; module_param_array(gpio_input, int, NULL, 0); MODULE_PARM_DESC(gpio_input, "List of GPIO pins (0-16) to program as inputs"); module_param_array(gpio_output, int, NULL, 0); -MODULE_PARM_DESC(gpio_output, "List of GPIO pins (0-16) to program as " - "outputs"); +MODULE_PARM_DESC(gpio_output, + "List of GPIO pins (0-16) to program as outputs"); module_param_array(gpio_inverted, int, NULL, 0); -MODULE_PARM_DESC(gpio_inverted, "List of GPIO pins (0-16) to program as " - "inverted"); +MODULE_PARM_DESC(gpio_inverted, + "List of GPIO pins (0-16) to program as inverted"); module_param_array(gpio_normal, int, NULL, 0); -MODULE_PARM_DESC(gpio_normal, "List of GPIO pins (0-16) to program as " - "normal/non-inverted"); +MODULE_PARM_DESC(gpio_normal, + "List of GPIO pins (0-16) to program as normal/non-inverted"); module_param_array(gpio_fan, int, NULL, 0); MODULE_PARM_DESC(gpio_fan, "List of GPIO pins (0-7) to program as fan tachs"); @@ -372,31 +372,31 @@ static void adm1026_init_client(struct i2c_client *client) dev_dbg(&client->dev, "ADM1026_REG_CONFIG1 is: 0x%02x\n", data->config1); if ((data->config1 & CFG1_MONITOR) == 0) { - dev_dbg(&client->dev, "Monitoring not currently " - "enabled.\n"); + dev_dbg(&client->dev, + "Monitoring not currently enabled.\n"); } if (data->config1 & CFG1_INT_ENABLE) { - dev_dbg(&client->dev, "SMBALERT interrupts are " - "enabled.\n"); + dev_dbg(&client->dev, + "SMBALERT interrupts are enabled.\n"); } if (data->config1 & CFG1_AIN8_9) { - dev_dbg(&client->dev, "in8 and in9 enabled. " - "temp3 disabled.\n"); + dev_dbg(&client->dev, + "in8 and in9 enabled. temp3 disabled.\n"); } else { - dev_dbg(&client->dev, "temp3 enabled. in8 and " - "in9 disabled.\n"); + dev_dbg(&client->dev, + "temp3 enabled. in8 and in9 disabled.\n"); } if (data->config1 & CFG1_THERM_HOT) { - dev_dbg(&client->dev, "Automatic THERM, PWM, " - "and temp limits enabled.\n"); + dev_dbg(&client->dev, + "Automatic THERM, PWM, and temp limits enabled.\n"); } if (data->config3 & CFG3_GPIO16_ENABLE) { - dev_dbg(&client->dev, "GPIO16 enabled. THERM " - "pin disabled.\n"); + dev_dbg(&client->dev, + "GPIO16 enabled. THERM pin disabled.\n"); } else { - dev_dbg(&client->dev, "THERM pin enabled. " - "GPIO16 disabled.\n"); + dev_dbg(&client->dev, + "THERM pin enabled. GPIO16 disabled.\n"); } if (data->config3 & CFG3_VREF_250) dev_dbg(&client->dev, "Vref is 2.50 Volts.\n"); @@ -1798,8 +1798,8 @@ static int adm1026_detect(struct i2c_client *client, company = adm1026_read_value(client, ADM1026_REG_COMPANY); verstep = adm1026_read_value(client, ADM1026_REG_VERSTEP); - dev_dbg(&adapter->dev, "Detecting device at %d,0x%02x with" - " COMPANY: 0x%02x and VERSTEP: 0x%02x\n", + dev_dbg(&adapter->dev, + "Detecting device at %d,0x%02x with COMPANY: 0x%02x and VERSTEP: 0x%02x\n", i2c_adapter_id(client->adapter), client->addr, company, verstep); @@ -1811,11 +1811,12 @@ static int adm1026_detect(struct i2c_client *client, /* Analog Devices ADM1026 */ } else if (company == ADM1026_COMPANY_ANALOG_DEV && (verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) { - dev_err(&adapter->dev, "Unrecognized stepping " - "0x%02x. Defaulting to ADM1026.\n", verstep); + dev_err(&adapter->dev, + "Unrecognized stepping 0x%02x. Defaulting to ADM1026.\n", + verstep); } else if ((verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) { - dev_err(&adapter->dev, "Found version/stepping " - "0x%02x. Assuming generic ADM1026.\n", + dev_err(&adapter->dev, + "Found version/stepping 0x%02x. Assuming generic ADM1026.\n", verstep); } else { dev_dbg(&adapter->dev, "Autodetection failed\n"); |