diff options
Diffstat (limited to 'drivers/hwmon/Kconfig')
| -rw-r--r-- | drivers/hwmon/Kconfig | 91 |
1 files changed, 67 insertions, 24 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 9afa70f877cc..079620dd4286 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -324,7 +324,7 @@ config SENSORS_K8TEMP config SENSORS_K10TEMP tristate "AMD Family 10h+ temperature sensor" - depends on X86 && PCI && AMD_NB + depends on X86 && PCI && AMD_NODE help If you say yes here you get support for the temperature sensor(s) inside your CPU. Supported are later revisions of @@ -335,6 +335,26 @@ config SENSORS_K10TEMP This driver can also be built as a module. If so, the module will be called k10temp. +config SENSORS_KBATT + tristate "KEBA battery controller support" + depends on KEBA_CP500 + help + This driver supports the battery monitoring controller found in + KEBA system FPGA devices. + + This driver can also be built as a module. If so, the module + will be called kbatt. + +config SENSORS_KFAN + tristate "KEBA fan controller support" + depends on KEBA_CP500 + help + This driver supports the fan controller found in KEBA system + FPGA devices. + + This driver can also be built as a module. If so, the module + will be called kfan. + config SENSORS_FAM15H_POWER tristate "AMD Family 15h processor power" depends on X86 && PCI && CPU_SUP_AMD @@ -463,6 +483,16 @@ config SENSORS_BT1_PVT_ALARMS the data conversion will be periodically performed and the data will be saved in the internal driver cache. +config SENSORS_CGBC + tristate "Congatec Board Controller Sensors" + depends on MFD_CGBC + help + Enable sensors support for the Congatec Board Controller. It has + temperature, voltage, current and fan sensors. + + This driver can also be built as a module. If so, the module will be + called cgbc-hwmon. + config SENSORS_CHIPCAP2 tristate "Amphenol ChipCap 2 relative humidity and temperature sensor" depends on I2C @@ -789,6 +819,17 @@ config SENSORS_HS3001 This driver can also be built as a module. If so, the module will be called hs3001. +config SENSORS_HTU31 + tristate "Measurement Specialties HTU31 humidity and temperature sensor" + depends on I2C + select CRC8 + help + If you say yes here you get support for the HTU31 humidity + and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called htu31. + config SENSORS_IBMAEM tristate "IBM Active Energy Manager temperature/power sensors and control" select IPMI_SI @@ -1287,6 +1328,15 @@ config SENSORS_MAX31790 This driver can also be built as a module. If so, the module will be called max31790. +config SENSORS_MAX77705 + tristate "MAX77705 current and voltage sensor" + depends on MFD_MAX77705 + help + If you say yes here you get support for MAX77705 sensors connected with I2C. + + This driver can also be built as a module. If so, the module + will be called max77705-hwmon. + config SENSORS_MC34VR500 tristate "NXP MC34VR500 hardware monitoring driver" depends on I2C @@ -1412,7 +1462,9 @@ config SENSORS_LM73 config SENSORS_LM75 tristate "National Semiconductor LM75 and compatibles" depends on I2C + depends on I3C || !I3C select REGMAP_I2C + select REGMAP_I3C if I3C help If you say yes here you get support for one common type of temperature sensor chip, with models including: @@ -1517,7 +1569,7 @@ config SENSORS_LM90 MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008, NCT210, NCT72, NCT214, NCT218, - Winbond/Nuvoton W83L771W/G/AWG/ASG, + Winbond/Nuvoton W83L771W/G/AWG/ASG, NCT7716, NCT7717 and NCT7718, Philips NE1618, SA56004, GMT G781, Texas Instruments TMP451 and TMP461 sensor chips. @@ -1623,7 +1675,7 @@ config SENSORS_NTC_THERMISTOR B57891S0103 from EPCOS. This driver can also be built as a module. If so, the module - will be called ntc-thermistor. + will be called ntc_thermistor. config SENSORS_NCT6683 tristate "Nuvoton NCT6683D" @@ -1772,17 +1824,6 @@ config SENSORS_NZXT_SMART2 source "drivers/hwmon/occ/Kconfig" -config SENSORS_OXP - tristate "OneXPlayer EC fan control" - depends on ACPI_EC - depends on X86 - help - If you say yes here you get support for fan readings and control over - OneXPlayer handheld devices. Only OneXPlayer mini AMD handheld variant - boards are supported. - - Can also be built as a module. In that case it will be called oxp-sensors. - config SENSORS_PCF8591 tristate "Philips PCF8591 ADC/DAC" depends on I2C @@ -1822,6 +1863,18 @@ config SENSORS_PWM_FAN This driver can also be built as a module. If so, the module will be called pwm-fan. +config SENSORS_QNAP_MCU_HWMON + tristate "QNAP MCU hardware monitoring" + depends on MFD_QNAP_MCU + depends on THERMAL || THERMAL=n + help + Say yes here to enable support for fan and temperature sensor + connected to a QNAP MCU, as found in a number of QNAP network + attached storage devices. + + This driver can also be built as a module. If so, the module + will be called qnap-mcu-hwmon. + config SENSORS_RASPBERRYPI_HWMON tristate "Raspberry Pi voltage monitor" depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) @@ -1852,16 +1905,6 @@ config SENSORS_SBTSI This driver can also be built as a module. If so, the module will be called sbtsi_temp. -config SENSORS_SBRMI - tristate "Emulated SB-RMI sensor" - depends on I2C - help - If you say yes here you get support for emulated RMI - sensors on AMD SoCs with APML interface connected to a BMC device. - - This driver can also be built as a module. If so, the module will - be called sbrmi. - config SENSORS_SHT15 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." depends on GPIOLIB || COMPILE_TEST |