summaryrefslogtreecommitdiff
path: root/drivers/hid/hid-mcp2221.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hid/hid-mcp2221.c')
-rw-r--r--drivers/hid/hid-mcp2221.c742
1 files changed, 742 insertions, 0 deletions
diff --git a/drivers/hid/hid-mcp2221.c b/drivers/hid/hid-mcp2221.c
new file mode 100644
index 000000000000..d958475f8c81
--- /dev/null
+++ b/drivers/hid/hid-mcp2221.c
@@ -0,0 +1,742 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MCP2221A - Microchip USB to I2C Host Protocol Bridge
+ *
+ * Copyright (c) 2020, Rishi Gupta <gupt21@gmail.com>
+ *
+ * Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/20005565B.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/hid.h>
+#include <linux/hidraw.h>
+#include <linux/i2c.h>
+#include "hid-ids.h"
+
+/* Commands codes in a raw output report */
+enum {
+ MCP2221_I2C_WR_DATA = 0x90,
+ MCP2221_I2C_WR_NO_STOP = 0x94,
+ MCP2221_I2C_RD_DATA = 0x91,
+ MCP2221_I2C_RD_RPT_START = 0x93,
+ MCP2221_I2C_GET_DATA = 0x40,
+ MCP2221_I2C_PARAM_OR_STATUS = 0x10,
+ MCP2221_I2C_SET_SPEED = 0x20,
+ MCP2221_I2C_CANCEL = 0x10,
+};
+
+/* Response codes in a raw input report */
+enum {
+ MCP2221_SUCCESS = 0x00,
+ MCP2221_I2C_ENG_BUSY = 0x01,
+ MCP2221_I2C_START_TOUT = 0x12,
+ MCP2221_I2C_STOP_TOUT = 0x62,
+ MCP2221_I2C_WRADDRL_TOUT = 0x23,
+ MCP2221_I2C_WRDATA_TOUT = 0x44,
+ MCP2221_I2C_WRADDRL_NACK = 0x25,
+ MCP2221_I2C_MASK_ADDR_NACK = 0x40,
+ MCP2221_I2C_WRADDRL_SEND = 0x21,
+ MCP2221_I2C_ADDR_NACK = 0x25,
+ MCP2221_I2C_READ_COMPL = 0x55,
+};
+
+/*
+ * There is no way to distinguish responses. Therefore next command
+ * is sent only after response to previous has been received. Mutex
+ * lock is used for this purpose mainly.
+ */
+struct mcp2221 {
+ struct hid_device *hdev;
+ struct i2c_adapter adapter;
+ struct mutex lock;
+ struct completion wait_in_report;
+ u8 *rxbuf;
+ u8 txbuf[64];
+ int rxbuf_idx;
+ int status;
+ u8 cur_i2c_clk_div;
+};
+
+/*
+ * Default i2c bus clock frequency 400 kHz. Modify this if you
+ * want to set some other frequency (min 50 kHz - max 400 kHz).
+ */
+static uint i2c_clk_freq = 400;
+
+/* Synchronously send output report to the device */
+static int mcp_send_report(struct mcp2221 *mcp,
+ u8 *out_report, size_t len)
+{
+ u8 *buf;
+ int ret;
+
+ buf = kmemdup(out_report, len, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ /* mcp2221 uses interrupt endpoint for out reports */
+ ret = hid_hw_output_report(mcp->hdev, buf, len);
+ kfree(buf);
+
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+/*
+ * Send o/p report to the device and wait for i/p report to be
+ * received from the device. If the device does not respond,
+ * we timeout.
+ */
+static int mcp_send_data_req_status(struct mcp2221 *mcp,
+ u8 *out_report, int len)
+{
+ int ret;
+ unsigned long t;
+
+ reinit_completion(&mcp->wait_in_report);
+
+ ret = mcp_send_report(mcp, out_report, len);
+ if (ret)
+ return ret;
+
+ t = wait_for_completion_timeout(&mcp->wait_in_report,
+ msecs_to_jiffies(4000));
+ if (!t)
+ return -ETIMEDOUT;
+
+ return mcp->status;
+}
+
+/* Check pass/fail for actual communication with i2c slave */
+static int mcp_chk_last_cmd_status(struct mcp2221 *mcp)
+{
+ memset(mcp->txbuf, 0, 8);
+ mcp->txbuf[0] = MCP2221_I2C_PARAM_OR_STATUS;
+
+ return mcp_send_data_req_status(mcp, mcp->txbuf, 8);
+}
+
+/* Cancels last command releasing i2c bus just in case occupied */
+static int mcp_cancel_last_cmd(struct mcp2221 *mcp)
+{
+ memset(mcp->txbuf, 0, 8);
+ mcp->txbuf[0] = MCP2221_I2C_PARAM_OR_STATUS;
+ mcp->txbuf[2] = MCP2221_I2C_CANCEL;
+
+ return mcp_send_data_req_status(mcp, mcp->txbuf, 8);
+}
+
+static int mcp_set_i2c_speed(struct mcp2221 *mcp)
+{
+ int ret;
+
+ memset(mcp->txbuf, 0, 8);
+ mcp->txbuf[0] = MCP2221_I2C_PARAM_OR_STATUS;
+ mcp->txbuf[3] = MCP2221_I2C_SET_SPEED;
+ mcp->txbuf[4] = mcp->cur_i2c_clk_div;
+
+ ret = mcp_send_data_req_status(mcp, mcp->txbuf, 8);
+ if (ret) {
+ /* Small delay is needed here */
+ usleep_range(980, 1000);
+ mcp_cancel_last_cmd(mcp);
+ }
+
+ return 0;
+}
+
+/*
+ * An output report can contain minimum 1 and maximum 60 user data
+ * bytes. If the number of data bytes is more then 60, we send it
+ * in chunks of 60 bytes. Last chunk may contain exactly 60 or less
+ * bytes. Total number of bytes is informed in very first report to
+ * mcp2221, from that point onwards it first collect all the data
+ * from host and then send to i2c slave device.
+ */
+static int mcp_i2c_write(struct mcp2221 *mcp,
+ struct i2c_msg *msg, int type, u8 last_status)
+{
+ int ret, len, idx, sent;
+
+ idx = 0;
+ sent = 0;
+ if (msg->len < 60)
+ len = msg->len;
+ else
+ len = 60;
+
+ do {
+ mcp->txbuf[0] = type;
+ mcp->txbuf[1] = msg->len & 0xff;
+ mcp->txbuf[2] = msg->len >> 8;
+ mcp->txbuf[3] = (u8)(msg->addr << 1);
+
+ memcpy(&mcp->txbuf[4], &msg->buf[idx], len);
+
+ ret = mcp_send_data_req_status(mcp, mcp->txbuf, len + 4);
+ if (ret)
+ return ret;
+
+ usleep_range(980, 1000);
+
+ if (last_status) {
+ ret = mcp_chk_last_cmd_status(mcp);
+ if (ret)
+ return ret;
+ }
+
+ sent = sent + len;
+ if (sent >= msg->len)
+ break;
+
+ idx = idx + len;
+ if ((msg->len - sent) < 60)
+ len = msg->len - sent;
+ else
+ len = 60;
+
+ /*
+ * Testing shows delay is needed between successive writes
+ * otherwise next write fails on first-try from i2c core.
+ * This value is obtained through automated stress testing.
+ */
+ usleep_range(980, 1000);
+ } while (len > 0);
+
+ return ret;
+}
+
+/*
+ * Device reads all data (0 - 65535 bytes) from i2c slave device and
+ * stores it in device itself. This data is read back from device to
+ * host in multiples of 60 bytes using input reports.
+ */
+static int mcp_i2c_smbus_read(struct mcp2221 *mcp,
+ struct i2c_msg *msg, int type, u16 smbus_addr,
+ u8 smbus_len, u8 *smbus_buf)
+{
+ int ret;
+ u16 total_len;
+
+ mcp->txbuf[0] = type;
+ if (msg) {
+ mcp->txbuf[1] = msg->len & 0xff;
+ mcp->txbuf[2] = msg->len >> 8;
+ mcp->txbuf[3] = (u8)(msg->addr << 1);
+ total_len = msg->len;
+ mcp->rxbuf = msg->buf;
+ } else {
+ mcp->txbuf[1] = smbus_len;
+ mcp->txbuf[2] = 0;
+ mcp->txbuf[3] = (u8)(smbus_addr << 1);
+ total_len = smbus_len;
+ mcp->rxbuf = smbus_buf;
+ }
+
+ ret = mcp_send_data_req_status(mcp, mcp->txbuf, 4);
+ if (ret)
+ return ret;
+
+ mcp->rxbuf_idx = 0;
+
+ do {
+ memset(mcp->txbuf, 0, 4);
+ mcp->txbuf[0] = MCP2221_I2C_GET_DATA;
+
+ ret = mcp_send_data_req_status(mcp, mcp->txbuf, 1);
+ if (ret)
+ return ret;
+
+ ret = mcp_chk_last_cmd_status(mcp);
+ if (ret)
+ return ret;
+
+ usleep_range(980, 1000);
+ } while (mcp->rxbuf_idx < total_len);
+
+ return ret;
+}
+
+static int mcp_i2c_xfer(struct i2c_adapter *adapter,
+ struct i2c_msg msgs[], int num)
+{
+ int ret;
+ struct mcp2221 *mcp = i2c_get_adapdata(adapter);
+
+ hid_hw_power(mcp->hdev, PM_HINT_FULLON);
+
+ mutex_lock(&mcp->lock);
+
+ /* Setting speed before every transaction is required for mcp2221 */
+ ret = mcp_set_i2c_speed(mcp);
+ if (ret)
+ goto exit;
+
+ if (num == 1) {
+ if (msgs->flags & I2C_M_RD) {
+ ret = mcp_i2c_smbus_read(mcp, msgs, MCP2221_I2C_RD_DATA,
+ 0, 0, NULL);
+ } else {
+ ret = mcp_i2c_write(mcp, msgs, MCP2221_I2C_WR_DATA, 1);
+ }
+ if (ret)
+ goto exit;
+ ret = num;
+ } else if (num == 2) {
+ /* Ex transaction; send reg address and read its contents */
+ if (msgs[0].addr == msgs[1].addr &&
+ !(msgs[0].flags & I2C_M_RD) &&
+ (msgs[1].flags & I2C_M_RD)) {
+
+ ret = mcp_i2c_write(mcp, &msgs[0],
+ MCP2221_I2C_WR_NO_STOP, 0);
+ if (ret)
+ goto exit;
+
+ ret = mcp_i2c_smbus_read(mcp, &msgs[1],
+ MCP2221_I2C_RD_RPT_START,
+ 0, 0, NULL);
+ if (ret)
+ goto exit;
+ ret = num;
+ } else {
+ dev_err(&adapter->dev,
+ "unsupported multi-msg i2c transaction\n");
+ ret = -EOPNOTSUPP;
+ }
+ } else {
+ dev_err(&adapter->dev,
+ "unsupported multi-msg i2c transaction\n");
+ ret = -EOPNOTSUPP;
+ }
+
+exit:
+ hid_hw_power(mcp->hdev, PM_HINT_NORMAL);
+ mutex_unlock(&mcp->lock);
+ return ret;
+}
+
+static int mcp_smbus_write(struct mcp2221 *mcp, u16 addr,
+ u8 command, u8 *buf, u8 len, int type,
+ u8 last_status)
+{
+ int data_len, ret;
+
+ mcp->txbuf[0] = type;
+ mcp->txbuf[1] = len + 1; /* 1 is due to command byte itself */
+ mcp->txbuf[2] = 0;
+ mcp->txbuf[3] = (u8)(addr << 1);
+ mcp->txbuf[4] = command;
+
+ switch (len) {
+ case 0:
+ data_len = 5;
+ break;
+ case 1:
+ mcp->txbuf[5] = buf[0];
+ data_len = 6;
+ break;
+ case 2:
+ mcp->txbuf[5] = buf[0];
+ mcp->txbuf[6] = buf[1];
+ data_len = 7;
+ break;
+ default:
+ memcpy(&mcp->txbuf[5], buf, len);
+ data_len = len + 5;
+ }
+
+ ret = mcp_send_data_req_status(mcp, mcp->txbuf, data_len);
+ if (ret)
+ return ret;
+
+ if (last_status) {
+ usleep_range(980, 1000);
+
+ ret = mcp_chk_last_cmd_status(mcp);
+ if (ret)
+ return ret;
+ }
+
+ return ret;
+}
+
+static int mcp_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size,
+ union i2c_smbus_data *data)
+{
+ int ret;
+ struct mcp2221 *mcp = i2c_get_adapdata(adapter);
+
+ hid_hw_power(mcp->hdev, PM_HINT_FULLON);
+
+ mutex_lock(&mcp->lock);
+
+ ret = mcp_set_i2c_speed(mcp);
+ if (ret)
+ goto exit;
+
+ switch (size) {
+
+ case I2C_SMBUS_QUICK:
+ if (read_write == I2C_SMBUS_READ)
+ ret = mcp_i2c_smbus_read(mcp, NULL, MCP2221_I2C_RD_DATA,
+ addr, 0, &data->byte);
+ else
+ ret = mcp_smbus_write(mcp, addr, command, NULL,
+ 0, MCP2221_I2C_WR_DATA, 1);
+ break;
+ case I2C_SMBUS_BYTE:
+ if (read_write == I2C_SMBUS_READ)
+ ret = mcp_i2c_smbus_read(mcp, NULL, MCP2221_I2C_RD_DATA,
+ addr, 1, &data->byte);
+ else
+ ret = mcp_smbus_write(mcp, addr, command, NULL,
+ 0, MCP2221_I2C_WR_DATA, 1);
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ if (read_write == I2C_SMBUS_READ) {
+ ret = mcp_smbus_write(mcp, addr, command, NULL,
+ 0, MCP2221_I2C_WR_NO_STOP, 0);
+ if (ret)
+ goto exit;
+
+ ret = mcp_i2c_smbus_read(mcp, NULL,
+ MCP2221_I2C_RD_RPT_START,
+ addr, 1, &data->byte);
+ } else {
+ ret = mcp_smbus_write(mcp, addr, command, &data->byte,
+ 1, MCP2221_I2C_WR_DATA, 1);
+ }
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ if (read_write == I2C_SMBUS_READ) {
+ ret = mcp_smbus_write(mcp, addr, command, NULL,
+ 0, MCP2221_I2C_WR_NO_STOP, 0);
+ if (ret)
+ goto exit;
+
+ ret = mcp_i2c_smbus_read(mcp, NULL,
+ MCP2221_I2C_RD_RPT_START,
+ addr, 2, (u8 *)&data->word);
+ } else {
+ ret = mcp_smbus_write(mcp, addr, command,
+ (u8 *)&data->word, 2,
+ MCP2221_I2C_WR_DATA, 1);
+ }
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ if (read_write == I2C_SMBUS_READ) {
+ ret = mcp_smbus_write(mcp, addr, command, NULL,
+ 0, MCP2221_I2C_WR_NO_STOP, 1);
+ if (ret)
+ goto exit;
+
+ mcp->rxbuf_idx = 0;
+ mcp->rxbuf = data->block;
+ mcp->txbuf[0] = MCP2221_I2C_GET_DATA;
+ ret = mcp_send_data_req_status(mcp, mcp->txbuf, 1);
+ if (ret)
+ goto exit;
+ } else {
+ if (!data->block[0]) {
+ ret = -EINVAL;
+ goto exit;
+ }
+ ret = mcp_smbus_write(mcp, addr, command, data->block,
+ data->block[0] + 1,
+ MCP2221_I2C_WR_DATA, 1);
+ }
+ break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ if (read_write == I2C_SMBUS_READ) {
+ ret = mcp_smbus_write(mcp, addr, command, NULL,
+ 0, MCP2221_I2C_WR_NO_STOP, 1);
+ if (ret)
+ goto exit;
+
+ mcp->rxbuf_idx = 0;
+ mcp->rxbuf = data->block;
+ mcp->txbuf[0] = MCP2221_I2C_GET_DATA;
+ ret = mcp_send_data_req_status(mcp, mcp->txbuf, 1);
+ if (ret)
+ goto exit;
+ } else {
+ if (!data->block[0]) {
+ ret = -EINVAL;
+ goto exit;
+ }
+ ret = mcp_smbus_write(mcp, addr, command,
+ &data->block[1], data->block[0],
+ MCP2221_I2C_WR_DATA, 1);
+ }
+ break;
+ case I2C_SMBUS_PROC_CALL:
+ ret = mcp_smbus_write(mcp, addr, command,
+ (u8 *)&data->word,
+ 2, MCP2221_I2C_WR_NO_STOP, 0);
+ if (ret)
+ goto exit;
+
+ ret = mcp_i2c_smbus_read(mcp, NULL,
+ MCP2221_I2C_RD_RPT_START,
+ addr, 2, (u8 *)&data->word);
+ break;
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ ret = mcp_smbus_write(mcp, addr, command, data->block,
+ data->block[0] + 1,
+ MCP2221_I2C_WR_NO_STOP, 0);
+ if (ret)
+ goto exit;
+
+ ret = mcp_i2c_smbus_read(mcp, NULL,
+ MCP2221_I2C_RD_RPT_START,
+ addr, I2C_SMBUS_BLOCK_MAX,
+ data->block);
+ break;
+ default:
+ dev_err(&mcp->adapter.dev,
+ "unsupported smbus transaction size:%d\n", size);
+ ret = -EOPNOTSUPP;
+ }
+
+exit:
+ hid_hw_power(mcp->hdev, PM_HINT_NORMAL);
+ mutex_unlock(&mcp->lock);
+ return ret;
+}
+
+static u32 mcp_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C |
+ I2C_FUNC_SMBUS_READ_BLOCK_DATA |
+ I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+ (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_PEC);
+}
+
+static const struct i2c_algorithm mcp_i2c_algo = {
+ .master_xfer = mcp_i2c_xfer,
+ .smbus_xfer = mcp_smbus_xfer,
+ .functionality = mcp_i2c_func,
+};
+
+/* Gives current state of i2c engine inside mcp2221 */
+static int mcp_get_i2c_eng_state(struct mcp2221 *mcp,
+ u8 *data, u8 idx)
+{
+ int ret;
+
+ switch (data[idx]) {
+ case MCP2221_I2C_WRADDRL_NACK:
+ case MCP2221_I2C_WRADDRL_SEND:
+ ret = -ENXIO;
+ break;
+ case MCP2221_I2C_START_TOUT:
+ case MCP2221_I2C_STOP_TOUT:
+ case MCP2221_I2C_WRADDRL_TOUT:
+ case MCP2221_I2C_WRDATA_TOUT:
+ ret = -ETIMEDOUT;
+ break;
+ case MCP2221_I2C_ENG_BUSY:
+ ret = -EAGAIN;
+ break;
+ case MCP2221_SUCCESS:
+ ret = 0x00;
+ break;
+ default:
+ ret = -EIO;
+ }
+
+ return ret;
+}
+
+/*
+ * MCP2221 uses interrupt endpoint for input reports. This function
+ * is called by HID layer when it receives i/p report from mcp2221,
+ * which is actually a response to the previously sent command.
+ *
+ * MCP2221A firmware specific return codes are parsed and 0 or
+ * appropriate negative error code is returned. Delayed response
+ * results in timeout error and stray reponses results in -EIO.
+ */
+static int mcp2221_raw_event(struct hid_device *hdev,
+ struct hid_report *report, u8 *data, int size)
+{
+ u8 *buf;
+ struct mcp2221 *mcp = hid_get_drvdata(hdev);
+
+ switch (data[0]) {
+
+ case MCP2221_I2C_WR_DATA:
+ case MCP2221_I2C_WR_NO_STOP:
+ case MCP2221_I2C_RD_DATA:
+ case MCP2221_I2C_RD_RPT_START:
+ switch (data[1]) {
+ case MCP2221_SUCCESS:
+ mcp->status = 0;
+ break;
+ default:
+ mcp->status = mcp_get_i2c_eng_state(mcp, data, 2);
+ }
+ complete(&mcp->wait_in_report);
+ break;
+
+ case MCP2221_I2C_PARAM_OR_STATUS:
+ switch (data[1]) {
+ case MCP2221_SUCCESS:
+ if ((mcp->txbuf[3] == MCP2221_I2C_SET_SPEED) &&
+ (data[3] != MCP2221_I2C_SET_SPEED)) {
+ mcp->status = -EAGAIN;
+ break;
+ }
+ if (data[20] & MCP2221_I2C_MASK_ADDR_NACK) {
+ mcp->status = -ENXIO;
+ break;
+ }
+ mcp->status = mcp_get_i2c_eng_state(mcp, data, 8);
+ break;
+ default:
+ mcp->status = -EIO;
+ }
+ complete(&mcp->wait_in_report);
+ break;
+
+ case MCP2221_I2C_GET_DATA:
+ switch (data[1]) {
+ case MCP2221_SUCCESS:
+ if (data[2] == MCP2221_I2C_ADDR_NACK) {
+ mcp->status = -ENXIO;
+ break;
+ }
+ if (!mcp_get_i2c_eng_state(mcp, data, 2)
+ && (data[3] == 0)) {
+ mcp->status = 0;
+ break;
+ }
+ if (data[3] == 127) {
+ mcp->status = -EIO;
+ break;
+ }
+ if (data[2] == MCP2221_I2C_READ_COMPL) {
+ buf = mcp->rxbuf;
+ memcpy(&buf[mcp->rxbuf_idx], &data[4], data[3]);
+ mcp->rxbuf_idx = mcp->rxbuf_idx + data[3];
+ mcp->status = 0;
+ break;
+ }
+ mcp->status = -EIO;
+ break;
+ default:
+ mcp->status = -EIO;
+ }
+ complete(&mcp->wait_in_report);
+ break;
+
+ default:
+ mcp->status = -EIO;
+ complete(&mcp->wait_in_report);
+ }
+
+ return 1;
+}
+
+static int mcp2221_probe(struct hid_device *hdev,
+ const struct hid_device_id *id)
+{
+ int ret;
+ struct mcp2221 *mcp;
+
+ mcp = devm_kzalloc(&hdev->dev, sizeof(*mcp), GFP_KERNEL);
+ if (!mcp)
+ return -ENOMEM;
+
+ ret = hid_parse(hdev);
+ if (ret) {
+ hid_err(hdev, "can't parse reports\n");
+ return ret;
+ }
+
+ ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
+ if (ret) {
+ hid_err(hdev, "can't start hardware\n");
+ return ret;
+ }
+
+ ret = hid_hw_open(hdev);
+ if (ret) {
+ hid_err(hdev, "can't open device\n");
+ goto err_hstop;
+ }
+
+ mutex_init(&mcp->lock);
+ init_completion(&mcp->wait_in_report);
+ hid_set_drvdata(hdev, mcp);
+ mcp->hdev = hdev;
+
+ /* Set I2C bus clock diviser */
+ if (i2c_clk_freq > 400)
+ i2c_clk_freq = 400;
+ if (i2c_clk_freq < 50)
+ i2c_clk_freq = 50;
+ mcp->cur_i2c_clk_div = (12000000 / (i2c_clk_freq * 1000)) - 3;
+
+ mcp->adapter.owner = THIS_MODULE;
+ mcp->adapter.class = I2C_CLASS_HWMON;
+ mcp->adapter.algo = &mcp_i2c_algo;
+ mcp->adapter.retries = 1;
+ mcp->adapter.dev.parent = &hdev->dev;
+ snprintf(mcp->adapter.name, sizeof(mcp->adapter.name),
+ "MCP2221 usb-i2c bridge on hidraw%d",
+ ((struct hidraw *)hdev->hidraw)->minor);
+
+ ret = i2c_add_adapter(&mcp->adapter);
+ if (ret) {
+ hid_err(hdev, "can't add usb-i2c adapter: %d\n", ret);
+ goto err_i2c;
+ }
+ i2c_set_adapdata(&mcp->adapter, mcp);
+
+ return 0;
+
+err_i2c:
+ hid_hw_close(mcp->hdev);
+err_hstop:
+ hid_hw_stop(mcp->hdev);
+ return ret;
+}
+
+static void mcp2221_remove(struct hid_device *hdev)
+{
+ struct mcp2221 *mcp = hid_get_drvdata(hdev);
+
+ i2c_del_adapter(&mcp->adapter);
+ hid_hw_close(mcp->hdev);
+ hid_hw_stop(mcp->hdev);
+}
+
+static const struct hid_device_id mcp2221_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_MCP2221) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, mcp2221_devices);
+
+static struct hid_driver mcp2221_driver = {
+ .name = "mcp2221",
+ .id_table = mcp2221_devices,
+ .probe = mcp2221_probe,
+ .remove = mcp2221_remove,
+ .raw_event = mcp2221_raw_event,
+};
+
+/* Register with HID core */
+module_hid_driver(mcp2221_driver);
+
+MODULE_AUTHOR("Rishi Gupta <gupt21@gmail.com>");
+MODULE_DESCRIPTION("MCP2221 Microchip HID USB to I2C master bridge");
+MODULE_LICENSE("GPL v2");
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-30 05:47:31 +0300