diff options
Diffstat (limited to 'drivers/gpu/drm/vboxvideo/vboxvideo.h')
| -rw-r--r-- | drivers/gpu/drm/vboxvideo/vboxvideo.h | 442 |
1 files changed, 442 insertions, 0 deletions
diff --git a/drivers/gpu/drm/vboxvideo/vboxvideo.h b/drivers/gpu/drm/vboxvideo/vboxvideo.h new file mode 100644 index 000000000000..0592004f71aa --- /dev/null +++ b/drivers/gpu/drm/vboxvideo/vboxvideo.h @@ -0,0 +1,442 @@ +/* SPDX-License-Identifier: MIT */ +/* Copyright (C) 2006-2016 Oracle Corporation */ + +#ifndef __VBOXVIDEO_H__ +#define __VBOXVIDEO_H__ + +#define VBOX_VIDEO_MAX_SCREENS 64 + +/* + * The last 4096 bytes of the guest VRAM contains the generic info for all + * DualView chunks: sizes and offsets of chunks. This is filled by miniport. + * + * Last 4096 bytes of each chunk contain chunk specific data: framebuffer info, + * etc. This is used exclusively by the corresponding instance of a display + * driver. + * + * The VRAM layout: + * Last 4096 bytes - Adapter information area. + * 4096 bytes aligned miniport heap (value specified in the config rouded up). + * Slack - what left after dividing the VRAM. + * 4096 bytes aligned framebuffers: + * last 4096 bytes of each framebuffer is the display information area. + * + * The Virtual Graphics Adapter information in the guest VRAM is stored by the + * guest video driver using structures prepended by VBOXVIDEOINFOHDR. + * + * When the guest driver writes dword 0 to the VBE_DISPI_INDEX_VBOX_VIDEO + * the host starts to process the info. The first element at the start of + * the 4096 bytes region should be normally be a LINK that points to + * actual information chain. That way the guest driver can have some + * fixed layout of the information memory block and just rewrite + * the link to point to relevant memory chain. + * + * The processing stops at the END element. + * + * The host can access the memory only when the port IO is processed. + * All data that will be needed later must be copied from these 4096 bytes. + * But other VRAM can be used by host until the mode is disabled. + * + * The guest driver writes dword 0xffffffff to the VBE_DISPI_INDEX_VBOX_VIDEO + * to disable the mode. + * + * VBE_DISPI_INDEX_VBOX_VIDEO is used to read the configuration information + * from the host and issue commands to the host. + * + * The guest writes the VBE_DISPI_INDEX_VBOX_VIDEO index register, the the + * following operations with the VBE data register can be performed: + * + * Operation Result + * write 16 bit value NOP + * read 16 bit value count of monitors + * write 32 bit value set the vbox cmd value and the cmd processed by the host + * read 32 bit value result of the last vbox command is returned + */ + +struct vbva_cmd_hdr { + s16 x; + s16 y; + u16 w; + u16 h; +} __packed; + +/* + * The VBVA ring buffer is suitable for transferring large (< 2GB) amount of + * data. For example big bitmaps which do not fit to the buffer. + * + * Guest starts writing to the buffer by initializing a record entry in the + * records queue. VBVA_F_RECORD_PARTIAL indicates that the record is being + * written. As data is written to the ring buffer, the guest increases + * free_offset. + * + * The host reads the records on flushes and processes all completed records. + * When host encounters situation when only a partial record presents and + * len_and_flags & ~VBVA_F_RECORD_PARTIAL >= VBVA_RING_BUFFER_SIZE - + * VBVA_RING_BUFFER_THRESHOLD, the host fetched all record data and updates + * data_offset. After that on each flush the host continues fetching the data + * until the record is completed. + */ + +#define VBVA_RING_BUFFER_SIZE (4194304 - 1024) +#define VBVA_RING_BUFFER_THRESHOLD (4096) + +#define VBVA_MAX_RECORDS (64) + +#define VBVA_F_MODE_ENABLED 0x00000001u +#define VBVA_F_MODE_VRDP 0x00000002u +#define VBVA_F_MODE_VRDP_RESET 0x00000004u +#define VBVA_F_MODE_VRDP_ORDER_MASK 0x00000008u + +#define VBVA_F_STATE_PROCESSING 0x00010000u + +#define VBVA_F_RECORD_PARTIAL 0x80000000u + +struct vbva_record { + u32 len_and_flags; +} __packed; + +/* + * The minimum HGSMI heap size is PAGE_SIZE (4096 bytes) and is a restriction of + * the runtime heapsimple API. Use minimum 2 pages here, because the info area + * also may contain other data (for example hgsmi_host_flags structure). + */ +#define VBVA_ADAPTER_INFORMATION_SIZE 65536 +#define VBVA_MIN_BUFFER_SIZE 65536 + +/* The value for port IO to let the adapter to interpret the adapter memory. */ +#define VBOX_VIDEO_DISABLE_ADAPTER_MEMORY 0xFFFFFFFF + +/* The value for port IO to let the adapter to interpret the adapter memory. */ +#define VBOX_VIDEO_INTERPRET_ADAPTER_MEMORY 0x00000000 + +/* + * The value for port IO to let the adapter to interpret the display memory. + * The display number is encoded in low 16 bits. + */ +#define VBOX_VIDEO_INTERPRET_DISPLAY_MEMORY_BASE 0x00010000 + +struct vbva_host_flags { + u32 host_events; + u32 supported_orders; +} __packed; + +struct vbva_buffer { + struct vbva_host_flags host_flags; + + /* The offset where the data start in the buffer. */ + u32 data_offset; + /* The offset where next data must be placed in the buffer. */ + u32 free_offset; + + /* The queue of record descriptions. */ + struct vbva_record records[VBVA_MAX_RECORDS]; + u32 record_first_index; + u32 record_free_index; + + /* Space to leave free when large partial records are transferred. */ + u32 partial_write_tresh; + + u32 data_len; + /* variable size for the rest of the vbva_buffer area in VRAM. */ + u8 data[0]; +} __packed; + +#define VBVA_MAX_RECORD_SIZE (128 * 1024 * 1024) + +/* guest->host commands */ +#define VBVA_QUERY_CONF32 1 +#define VBVA_SET_CONF32 2 +#define VBVA_INFO_VIEW 3 +#define VBVA_INFO_HEAP 4 +#define VBVA_FLUSH 5 +#define VBVA_INFO_SCREEN 6 +#define VBVA_ENABLE 7 +#define VBVA_MOUSE_POINTER_SHAPE 8 +/* informs host about HGSMI caps. see vbva_caps below */ +#define VBVA_INFO_CAPS 12 +/* configures scanline, see VBVASCANLINECFG below */ +#define VBVA_SCANLINE_CFG 13 +/* requests scanline info, see VBVASCANLINEINFO below */ +#define VBVA_SCANLINE_INFO 14 +/* inform host about VBVA Command submission */ +#define VBVA_CMDVBVA_SUBMIT 16 +/* inform host about VBVA Command submission */ +#define VBVA_CMDVBVA_FLUSH 17 +/* G->H DMA command */ +#define VBVA_CMDVBVA_CTL 18 +/* Query most recent mode hints sent */ +#define VBVA_QUERY_MODE_HINTS 19 +/* + * Report the guest virtual desktop position and size for mapping host and + * guest pointer positions. + */ +#define VBVA_REPORT_INPUT_MAPPING 20 +/* Report the guest cursor position and query the host position. */ +#define VBVA_CURSOR_POSITION 21 + +/* host->guest commands */ +#define VBVAHG_EVENT 1 +#define VBVAHG_DISPLAY_CUSTOM 2 + +/* vbva_conf32::index */ +#define VBOX_VBVA_CONF32_MONITOR_COUNT 0 +#define VBOX_VBVA_CONF32_HOST_HEAP_SIZE 1 +/* + * Returns VINF_SUCCESS if the host can report mode hints via VBVA. + * Set value to VERR_NOT_SUPPORTED before calling. + */ +#define VBOX_VBVA_CONF32_MODE_HINT_REPORTING 2 +/* + * Returns VINF_SUCCESS if the host can report guest cursor enabled status via + * VBVA. Set value to VERR_NOT_SUPPORTED before calling. + */ +#define VBOX_VBVA_CONF32_GUEST_CURSOR_REPORTING 3 +/* + * Returns the currently available host cursor capabilities. Available if + * VBOX_VBVA_CONF32_GUEST_CURSOR_REPORTING returns success. + */ +#define VBOX_VBVA_CONF32_CURSOR_CAPABILITIES 4 +/* Returns the supported flags in vbva_infoscreen.flags. */ +#define VBOX_VBVA_CONF32_SCREEN_FLAGS 5 +/* Returns the max size of VBVA record. */ +#define VBOX_VBVA_CONF32_MAX_RECORD_SIZE 6 + +struct vbva_conf32 { + u32 index; + u32 value; +} __packed; + +/* Reserved for historical reasons. */ +#define VBOX_VBVA_CURSOR_CAPABILITY_RESERVED0 BIT(0) +/* + * Guest cursor capability: can the host show a hardware cursor at the host + * pointer location? + */ +#define VBOX_VBVA_CURSOR_CAPABILITY_HARDWARE BIT(1) +/* Reserved for historical reasons. */ +#define VBOX_VBVA_CURSOR_CAPABILITY_RESERVED2 BIT(2) +/* Reserved for historical reasons. Must always be unset. */ +#define VBOX_VBVA_CURSOR_CAPABILITY_RESERVED3 BIT(3) +/* Reserved for historical reasons. */ +#define VBOX_VBVA_CURSOR_CAPABILITY_RESERVED4 BIT(4) +/* Reserved for historical reasons. */ +#define VBOX_VBVA_CURSOR_CAPABILITY_RESERVED5 BIT(5) + +struct vbva_infoview { + /* Index of the screen, assigned by the guest. */ + u32 view_index; + + /* The screen offset in VRAM, the framebuffer starts here. */ + u32 view_offset; + + /* The size of the VRAM memory that can be used for the view. */ + u32 view_size; + + /* The recommended maximum size of the VRAM memory for the screen. */ + u32 max_screen_size; +} __packed; + +struct vbva_flush { + u32 reserved; +} __packed; + +/* vbva_infoscreen.flags */ +#define VBVA_SCREEN_F_NONE 0x0000 +#define VBVA_SCREEN_F_ACTIVE 0x0001 +/* + * The virtual monitor has been disabled by the guest and should be removed + * by the host and ignored for purposes of pointer position calculation. + */ +#define VBVA_SCREEN_F_DISABLED 0x0002 +/* + * The virtual monitor has been blanked by the guest and should be blacked + * out by the host using width, height, etc values from the vbva_infoscreen + * request. + */ +#define VBVA_SCREEN_F_BLANK 0x0004 +/* + * The virtual monitor has been blanked by the guest and should be blacked + * out by the host using the previous mode values for width. height, etc. + */ +#define VBVA_SCREEN_F_BLANK2 0x0008 + +struct vbva_infoscreen { + /* Which view contains the screen. */ + u32 view_index; + + /* Physical X origin relative to the primary screen. */ + s32 origin_x; + + /* Physical Y origin relative to the primary screen. */ + s32 origin_y; + + /* Offset of visible framebuffer relative to the framebuffer start. */ + u32 start_offset; + + /* The scan line size in bytes. */ + u32 line_size; + + /* Width of the screen. */ + u32 width; + + /* Height of the screen. */ + u32 height; + + /* Color depth. */ + u16 bits_per_pixel; + + /* VBVA_SCREEN_F_* */ + u16 flags; +} __packed; + +/* vbva_enable.flags */ +#define VBVA_F_NONE 0x00000000 +#define VBVA_F_ENABLE 0x00000001 +#define VBVA_F_DISABLE 0x00000002 +/* extended VBVA to be used with WDDM */ +#define VBVA_F_EXTENDED 0x00000004 +/* vbva offset is absolute VRAM offset */ +#define VBVA_F_ABSOFFSET 0x00000008 + +struct vbva_enable { + u32 flags; + u32 offset; + s32 result; +} __packed; + +struct vbva_enable_ex { + struct vbva_enable base; + u32 screen_id; +} __packed; + +struct vbva_mouse_pointer_shape { + /* The host result. */ + s32 result; + + /* VBOX_MOUSE_POINTER_* bit flags. */ + u32 flags; + + /* X coordinate of the hot spot. */ + u32 hot_X; + + /* Y coordinate of the hot spot. */ + u32 hot_y; + + /* Width of the pointer in pixels. */ + u32 width; + + /* Height of the pointer in scanlines. */ + u32 height; + + /* Pointer data. + * + * The data consists of 1 bpp AND mask followed by 32 bpp XOR (color) + * mask. + * + * For pointers without alpha channel the XOR mask pixels are 32 bit + * values: (lsb)BGR0(msb). For pointers with alpha channel the XOR mask + * consists of (lsb)BGRA(msb) 32 bit values. + * + * Guest driver must create the AND mask for pointers with alpha chan., + * so if host does not support alpha, the pointer could be displayed as + * a normal color pointer. The AND mask can be constructed from alpha + * values. For example alpha value >= 0xf0 means bit 0 in the AND mask. + * + * The AND mask is 1 bpp bitmap with byte aligned scanlines. Size of AND + * mask, therefore, is and_len = (width + 7) / 8 * height. The padding + * bits at the end of any scanline are undefined. + * + * The XOR mask follows the AND mask on the next 4 bytes aligned offset: + * u8 *xor = and + (and_len + 3) & ~3 + * Bytes in the gap between the AND and the XOR mask are undefined. + * XOR mask scanlines have no gap between them and size of XOR mask is: + * xor_len = width * 4 * height. + * + * Preallocate 4 bytes for accessing actual data as p->data. + */ + u8 data[4]; +} __packed; + +/* pointer is visible */ +#define VBOX_MOUSE_POINTER_VISIBLE 0x0001 +/* pointer has alpha channel */ +#define VBOX_MOUSE_POINTER_ALPHA 0x0002 +/* pointerData contains new pointer shape */ +#define VBOX_MOUSE_POINTER_SHAPE 0x0004 + +/* + * The guest driver can handle asynch guest cmd completion by reading the + * command offset from io port. + */ +#define VBVACAPS_COMPLETEGCMD_BY_IOREAD 0x00000001 +/* the guest driver can handle video adapter IRQs */ +#define VBVACAPS_IRQ 0x00000002 +/* The guest can read video mode hints sent via VBVA. */ +#define VBVACAPS_VIDEO_MODE_HINTS 0x00000004 +/* The guest can switch to a software cursor on demand. */ +#define VBVACAPS_DISABLE_CURSOR_INTEGRATION 0x00000008 +/* The guest does not depend on host handling the VBE registers. */ +#define VBVACAPS_USE_VBVA_ONLY 0x00000010 + +struct vbva_caps { + s32 rc; + u32 caps; +} __packed; + +/* Query the most recent mode hints received from the host. */ +struct vbva_query_mode_hints { + /* The maximum number of screens to return hints for. */ + u16 hints_queried_count; + /* The size of the mode hint structures directly following this one. */ + u16 hint_structure_guest_size; + /* Return code for the operation. Initialise to VERR_NOT_SUPPORTED. */ + s32 rc; +} __packed; + +/* + * Structure in which a mode hint is returned. The guest allocates an array + * of these immediately after the vbva_query_mode_hints structure. + * To accommodate future extensions, the vbva_query_mode_hints structure + * specifies the size of the vbva_modehint structures allocated by the guest, + * and the host only fills out structure elements which fit into that size. The + * host should fill any unused members (e.g. dx, dy) or structure space on the + * end with ~0. The whole structure can legally be set to ~0 to skip a screen. + */ +struct vbva_modehint { + u32 magic; + u32 cx; + u32 cy; + u32 bpp; /* Which has never been used... */ + u32 display; + u32 dx; /* X offset into the virtual frame-buffer. */ + u32 dy; /* Y offset into the virtual frame-buffer. */ + u32 enabled; /* Not flags. Add new members for new flags. */ +} __packed; + +#define VBVAMODEHINT_MAGIC 0x0801add9u + +/* + * Report the rectangle relative to which absolute pointer events should be + * expressed. This information remains valid until the next VBVA resize event + * for any screen, at which time it is reset to the bounding rectangle of all + * virtual screens and must be re-set. + */ +struct vbva_report_input_mapping { + s32 x; /* Upper left X co-ordinate relative to the first screen. */ + s32 y; /* Upper left Y co-ordinate relative to the first screen. */ + u32 cx; /* Rectangle width. */ + u32 cy; /* Rectangle height. */ +} __packed; + +/* + * Report the guest cursor position and query the host one. The host may wish + * to use the guest information to re-position its own cursor (though this is + * currently unlikely). + */ +struct vbva_cursor_position { + u32 report_position; /* Are we reporting a position? */ + u32 x; /* Guest cursor X position */ + u32 y; /* Guest cursor Y position */ +} __packed; + +#endif |