diff options
Diffstat (limited to 'drivers/gpu/drm/panel/panel-sony-acx565akm.c')
| -rw-r--r-- | drivers/gpu/drm/panel/panel-sony-acx565akm.c | 701 |
1 files changed, 701 insertions, 0 deletions
diff --git a/drivers/gpu/drm/panel/panel-sony-acx565akm.c b/drivers/gpu/drm/panel/panel-sony-acx565akm.c new file mode 100644 index 000000000000..305259b58767 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-sony-acx565akm.c @@ -0,0 +1,701 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Sony ACX565AKM LCD Panel driver + * + * Copyright (C) 2019 Texas Instruments Incorporated + * + * Based on the omapdrm-specific panel-sony-acx565akm driver + * + * Copyright (C) 2010 Nokia Corporation + * Author: Imre Deak <imre.deak@nokia.com> + */ + +/* + * TODO (to be addressed with hardware access to test the changes): + * + * - Update backlight support to use backlight_update_status() etc. + * - Use prepare/unprepare for the basic power on/off of the backligt + */ + +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/jiffies.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/sched.h> +#include <linux/spi/spi.h> +#include <video/mipi_display.h> + +#include <drm/drm_connector.h> +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> + +#define CTRL_DISP_BRIGHTNESS_CTRL_ON BIT(5) +#define CTRL_DISP_AMBIENT_LIGHT_CTRL_ON BIT(4) +#define CTRL_DISP_BACKLIGHT_ON BIT(2) +#define CTRL_DISP_AUTO_BRIGHTNESS_ON BIT(1) + +#define MIPID_CMD_WRITE_CABC 0x55 +#define MIPID_CMD_READ_CABC 0x56 + +#define MIPID_VER_LPH8923 3 +#define MIPID_VER_LS041Y3 4 +#define MIPID_VER_L4F00311 8 +#define MIPID_VER_ACX565AKM 9 + +struct acx565akm_panel { + struct drm_panel panel; + + struct spi_device *spi; + struct gpio_desc *reset_gpio; + struct backlight_device *backlight; + + struct mutex mutex; + + const char *name; + u8 display_id[3]; + int model; + int revision; + bool has_bc; + bool has_cabc; + + bool enabled; + unsigned int cabc_mode; + /* + * Next value of jiffies when we can issue the next sleep in/out + * command. + */ + unsigned long hw_guard_end; + unsigned long hw_guard_wait; /* max guard time in jiffies */ +}; + +#define to_acx565akm_device(p) container_of(p, struct acx565akm_panel, panel) + +static void acx565akm_transfer(struct acx565akm_panel *lcd, int cmd, + const u8 *wbuf, int wlen, u8 *rbuf, int rlen) +{ + struct spi_message m; + struct spi_transfer *x, xfer[5]; + int ret; + + spi_message_init(&m); + + memset(xfer, 0, sizeof(xfer)); + x = &xfer[0]; + + cmd &= 0xff; + x->tx_buf = &cmd; + x->bits_per_word = 9; + x->len = 2; + + if (rlen > 1 && wlen == 0) { + /* + * Between the command and the response data there is a + * dummy clock cycle. Add an extra bit after the command + * word to account for this. + */ + x->bits_per_word = 10; + cmd <<= 1; + } + spi_message_add_tail(x, &m); + + if (wlen) { + x++; + x->tx_buf = wbuf; + x->len = wlen; + x->bits_per_word = 9; + spi_message_add_tail(x, &m); + } + + if (rlen) { + x++; + x->rx_buf = rbuf; + x->len = rlen; + spi_message_add_tail(x, &m); + } + + ret = spi_sync(lcd->spi, &m); + if (ret < 0) + dev_dbg(&lcd->spi->dev, "spi_sync %d\n", ret); +} + +static inline void acx565akm_cmd(struct acx565akm_panel *lcd, int cmd) +{ + acx565akm_transfer(lcd, cmd, NULL, 0, NULL, 0); +} + +static inline void acx565akm_write(struct acx565akm_panel *lcd, + int reg, const u8 *buf, int len) +{ + acx565akm_transfer(lcd, reg, buf, len, NULL, 0); +} + +static inline void acx565akm_read(struct acx565akm_panel *lcd, + int reg, u8 *buf, int len) +{ + acx565akm_transfer(lcd, reg, NULL, 0, buf, len); +} + +/* ----------------------------------------------------------------------------- + * Auto Brightness Control Via sysfs + */ + +static unsigned int acx565akm_get_cabc_mode(struct acx565akm_panel *lcd) +{ + return lcd->cabc_mode; +} + +static void acx565akm_set_cabc_mode(struct acx565akm_panel *lcd, + unsigned int mode) +{ + u16 cabc_ctrl; + + lcd->cabc_mode = mode; + if (!lcd->enabled) + return; + cabc_ctrl = 0; + acx565akm_read(lcd, MIPID_CMD_READ_CABC, (u8 *)&cabc_ctrl, 1); + cabc_ctrl &= ~3; + cabc_ctrl |= (1 << 8) | (mode & 3); + acx565akm_write(lcd, MIPID_CMD_WRITE_CABC, (u8 *)&cabc_ctrl, 2); +} + +static unsigned int acx565akm_get_hw_cabc_mode(struct acx565akm_panel *lcd) +{ + u8 cabc_ctrl; + + acx565akm_read(lcd, MIPID_CMD_READ_CABC, &cabc_ctrl, 1); + return cabc_ctrl & 3; +} + +static const char * const acx565akm_cabc_modes[] = { + "off", /* always used when CABC is not supported */ + "ui", + "still-image", + "moving-image", +}; + +static ssize_t cabc_mode_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct acx565akm_panel *lcd = dev_get_drvdata(dev); + const char *mode_str; + int mode; + + if (!lcd->has_cabc) + mode = 0; + else + mode = acx565akm_get_cabc_mode(lcd); + + mode_str = "unknown"; + if (mode >= 0 && mode < ARRAY_SIZE(acx565akm_cabc_modes)) + mode_str = acx565akm_cabc_modes[mode]; + + return sprintf(buf, "%s\n", mode_str); +} + +static ssize_t cabc_mode_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct acx565akm_panel *lcd = dev_get_drvdata(dev); + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(acx565akm_cabc_modes); i++) { + const char *mode_str = acx565akm_cabc_modes[i]; + int cmp_len = strlen(mode_str); + + if (count > 0 && buf[count - 1] == '\n') + count--; + if (count != cmp_len) + continue; + + if (strncmp(buf, mode_str, cmp_len) == 0) + break; + } + + if (i == ARRAY_SIZE(acx565akm_cabc_modes)) + return -EINVAL; + + if (!lcd->has_cabc && i != 0) + return -EINVAL; + + mutex_lock(&lcd->mutex); + acx565akm_set_cabc_mode(lcd, i); + mutex_unlock(&lcd->mutex); + + return count; +} + +static ssize_t cabc_available_modes_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct acx565akm_panel *lcd = dev_get_drvdata(dev); + unsigned int i; + size_t len = 0; + + if (!lcd->has_cabc) + return sprintf(buf, "%s\n", acx565akm_cabc_modes[0]); + + for (i = 0; i < ARRAY_SIZE(acx565akm_cabc_modes); i++) + len += sprintf(&buf[len], "%s%s", i ? " " : "", + acx565akm_cabc_modes[i]); + + buf[len++] = '\n'; + + return len; +} + +static DEVICE_ATTR_RW(cabc_mode); +static DEVICE_ATTR_RO(cabc_available_modes); + +static struct attribute *acx565akm_cabc_attrs[] = { + &dev_attr_cabc_mode.attr, + &dev_attr_cabc_available_modes.attr, + NULL, +}; + +static const struct attribute_group acx565akm_cabc_attr_group = { + .attrs = acx565akm_cabc_attrs, +}; + +/* ----------------------------------------------------------------------------- + * Backlight Device + */ + +static int acx565akm_get_actual_brightness(struct acx565akm_panel *lcd) +{ + u8 bv; + + acx565akm_read(lcd, MIPI_DCS_GET_DISPLAY_BRIGHTNESS, &bv, 1); + + return bv; +} + +static void acx565akm_set_brightness(struct acx565akm_panel *lcd, int level) +{ + u16 ctrl; + int bv; + + bv = level | (1 << 8); + acx565akm_write(lcd, MIPI_DCS_SET_DISPLAY_BRIGHTNESS, (u8 *)&bv, 2); + + acx565akm_read(lcd, MIPI_DCS_GET_CONTROL_DISPLAY, (u8 *)&ctrl, 1); + if (level) + ctrl |= CTRL_DISP_BRIGHTNESS_CTRL_ON | + CTRL_DISP_BACKLIGHT_ON; + else + ctrl &= ~(CTRL_DISP_BRIGHTNESS_CTRL_ON | + CTRL_DISP_BACKLIGHT_ON); + + ctrl |= 1 << 8; + acx565akm_write(lcd, MIPI_DCS_WRITE_CONTROL_DISPLAY, (u8 *)&ctrl, 2); +} + +static int acx565akm_bl_update_status_locked(struct backlight_device *dev) +{ + struct acx565akm_panel *lcd = dev_get_drvdata(&dev->dev); + int level; + + if (dev->props.fb_blank == FB_BLANK_UNBLANK && + dev->props.power == FB_BLANK_UNBLANK) + level = dev->props.brightness; + else + level = 0; + + acx565akm_set_brightness(lcd, level); + + return 0; +} + +static int acx565akm_bl_update_status(struct backlight_device *dev) +{ + struct acx565akm_panel *lcd = dev_get_drvdata(&dev->dev); + int ret; + + mutex_lock(&lcd->mutex); + ret = acx565akm_bl_update_status_locked(dev); + mutex_unlock(&lcd->mutex); + + return ret; +} + +static int acx565akm_bl_get_intensity(struct backlight_device *dev) +{ + struct acx565akm_panel *lcd = dev_get_drvdata(&dev->dev); + unsigned int intensity; + + mutex_lock(&lcd->mutex); + + if (dev->props.fb_blank == FB_BLANK_UNBLANK && + dev->props.power == FB_BLANK_UNBLANK) + intensity = acx565akm_get_actual_brightness(lcd); + else + intensity = 0; + + mutex_unlock(&lcd->mutex); + + return intensity; +} + +static const struct backlight_ops acx565akm_bl_ops = { + .get_brightness = acx565akm_bl_get_intensity, + .update_status = acx565akm_bl_update_status, +}; + +static int acx565akm_backlight_init(struct acx565akm_panel *lcd) +{ + struct backlight_properties props = { + .fb_blank = FB_BLANK_UNBLANK, + .power = FB_BLANK_UNBLANK, + .type = BACKLIGHT_RAW, + }; + int ret; + + lcd->backlight = backlight_device_register(lcd->name, &lcd->spi->dev, + lcd, &acx565akm_bl_ops, + &props); + if (IS_ERR(lcd->backlight)) { + ret = PTR_ERR(lcd->backlight); + lcd->backlight = NULL; + return ret; + } + + if (lcd->has_cabc) { + ret = sysfs_create_group(&lcd->backlight->dev.kobj, + &acx565akm_cabc_attr_group); + if (ret < 0) { + dev_err(&lcd->spi->dev, + "%s failed to create sysfs files\n", __func__); + backlight_device_unregister(lcd->backlight); + return ret; + } + + lcd->cabc_mode = acx565akm_get_hw_cabc_mode(lcd); + } + + lcd->backlight->props.max_brightness = 255; + lcd->backlight->props.brightness = acx565akm_get_actual_brightness(lcd); + + acx565akm_bl_update_status_locked(lcd->backlight); + + return 0; +} + +static void acx565akm_backlight_cleanup(struct acx565akm_panel *lcd) +{ + if (lcd->has_cabc) + sysfs_remove_group(&lcd->backlight->dev.kobj, + &acx565akm_cabc_attr_group); + + backlight_device_unregister(lcd->backlight); +} + +/* ----------------------------------------------------------------------------- + * DRM Bridge Operations + */ + +static void acx565akm_set_sleep_mode(struct acx565akm_panel *lcd, int on) +{ + int cmd = on ? MIPI_DCS_ENTER_SLEEP_MODE : MIPI_DCS_EXIT_SLEEP_MODE; + unsigned long wait; + + /* + * We have to keep 120msec between sleep in/out commands. + * (8.2.15, 8.2.16). + */ + wait = lcd->hw_guard_end - jiffies; + if ((long)wait > 0 && wait <= lcd->hw_guard_wait) { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(wait); + } + + acx565akm_cmd(lcd, cmd); + + lcd->hw_guard_wait = msecs_to_jiffies(120); + lcd->hw_guard_end = jiffies + lcd->hw_guard_wait; +} + +static void acx565akm_set_display_state(struct acx565akm_panel *lcd, + int enabled) +{ + int cmd = enabled ? MIPI_DCS_SET_DISPLAY_ON : MIPI_DCS_SET_DISPLAY_OFF; + + acx565akm_cmd(lcd, cmd); +} + +static int acx565akm_power_on(struct acx565akm_panel *lcd) +{ + /*FIXME tweak me */ + msleep(50); + + gpiod_set_value(lcd->reset_gpio, 1); + + if (lcd->enabled) { + dev_dbg(&lcd->spi->dev, "panel already enabled\n"); + return 0; + } + + /* + * We have to meet all the following delay requirements: + * 1. tRW: reset pulse width 10usec (7.12.1) + * 2. tRT: reset cancel time 5msec (7.12.1) + * 3. Providing PCLK,HS,VS signals for 2 frames = ~50msec worst + * case (7.6.2) + * 4. 120msec before the sleep out command (7.12.1) + */ + msleep(120); + + acx565akm_set_sleep_mode(lcd, 0); + lcd->enabled = true; + + /* 5msec between sleep out and the next command. (8.2.16) */ + usleep_range(5000, 10000); + acx565akm_set_display_state(lcd, 1); + acx565akm_set_cabc_mode(lcd, lcd->cabc_mode); + + return acx565akm_bl_update_status_locked(lcd->backlight); +} + +static void acx565akm_power_off(struct acx565akm_panel *lcd) +{ + if (!lcd->enabled) + return; + + acx565akm_set_display_state(lcd, 0); + acx565akm_set_sleep_mode(lcd, 1); + lcd->enabled = false; + /* + * We have to provide PCLK,HS,VS signals for 2 frames (worst case + * ~50msec) after sending the sleep in command and asserting the + * reset signal. We probably could assert the reset w/o the delay + * but we still delay to avoid possible artifacts. (7.6.1) + */ + msleep(50); + + gpiod_set_value(lcd->reset_gpio, 0); + + /* FIXME need to tweak this delay */ + msleep(100); +} + +static int acx565akm_disable(struct drm_panel *panel) +{ + struct acx565akm_panel *lcd = to_acx565akm_device(panel); + + mutex_lock(&lcd->mutex); + acx565akm_power_off(lcd); + mutex_unlock(&lcd->mutex); + + return 0; +} + +static int acx565akm_enable(struct drm_panel *panel) +{ + struct acx565akm_panel *lcd = to_acx565akm_device(panel); + + mutex_lock(&lcd->mutex); + acx565akm_power_on(lcd); + mutex_unlock(&lcd->mutex); + + return 0; +} + +static const struct drm_display_mode acx565akm_mode = { + .clock = 24000, + .hdisplay = 800, + .hsync_start = 800 + 28, + .hsync_end = 800 + 28 + 4, + .htotal = 800 + 28 + 4 + 24, + .vdisplay = 480, + .vsync_start = 480 + 3, + .vsync_end = 480 + 3 + 3, + .vtotal = 480 + 3 + 3 + 4, + .vrefresh = 57, + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, + .width_mm = 77, + .height_mm = 46, +}; + +static int acx565akm_get_modes(struct drm_panel *panel) +{ + struct drm_connector *connector = panel->connector; + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(panel->drm, &acx565akm_mode); + if (!mode) + return -ENOMEM; + + drm_mode_set_name(mode); + drm_mode_probed_add(connector, mode); + + connector->display_info.width_mm = acx565akm_mode.width_mm; + connector->display_info.height_mm = acx565akm_mode.height_mm; + connector->display_info.bus_flags = DRM_BUS_FLAG_DE_HIGH + | DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE + | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE; + + return 1; +} + +static const struct drm_panel_funcs acx565akm_funcs = { + .disable = acx565akm_disable, + .enable = acx565akm_enable, + .get_modes = acx565akm_get_modes, +}; + +/* ----------------------------------------------------------------------------- + * Probe, Detect and Remove + */ + +static int acx565akm_detect(struct acx565akm_panel *lcd) +{ + __be32 value; + u32 status; + int ret = 0; + + /* + * After being taken out of reset the panel needs 5ms before the first + * command can be sent. + */ + gpiod_set_value(lcd->reset_gpio, 1); + usleep_range(5000, 10000); + + acx565akm_read(lcd, MIPI_DCS_GET_DISPLAY_STATUS, (u8 *)&value, 4); + status = __be32_to_cpu(value); + lcd->enabled = (status & (1 << 17)) && (status & (1 << 10)); + + dev_dbg(&lcd->spi->dev, + "LCD panel %s by bootloader (status 0x%04x)\n", + lcd->enabled ? "enabled" : "disabled ", status); + + acx565akm_read(lcd, MIPI_DCS_GET_DISPLAY_ID, lcd->display_id, 3); + dev_dbg(&lcd->spi->dev, "MIPI display ID: %02x%02x%02x\n", + lcd->display_id[0], lcd->display_id[1], lcd->display_id[2]); + + switch (lcd->display_id[0]) { + case 0x10: + lcd->model = MIPID_VER_ACX565AKM; + lcd->name = "acx565akm"; + lcd->has_bc = 1; + lcd->has_cabc = 1; + break; + case 0x29: + lcd->model = MIPID_VER_L4F00311; + lcd->name = "l4f00311"; + break; + case 0x45: + lcd->model = MIPID_VER_LPH8923; + lcd->name = "lph8923"; + break; + case 0x83: + lcd->model = MIPID_VER_LS041Y3; + lcd->name = "ls041y3"; + break; + default: + lcd->name = "unknown"; + dev_err(&lcd->spi->dev, "unknown display ID\n"); + ret = -ENODEV; + goto done; + } + + lcd->revision = lcd->display_id[1]; + + dev_info(&lcd->spi->dev, "%s rev %02x panel detected\n", + lcd->name, lcd->revision); + +done: + if (!lcd->enabled) + gpiod_set_value(lcd->reset_gpio, 0); + + return ret; +} + +static int acx565akm_probe(struct spi_device *spi) +{ + struct acx565akm_panel *lcd; + int ret; + + lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL); + if (!lcd) + return -ENOMEM; + + spi_set_drvdata(spi, lcd); + spi->mode = SPI_MODE_3; + + lcd->spi = spi; + mutex_init(&lcd->mutex); + + lcd->reset_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(lcd->reset_gpio)) { + dev_err(&spi->dev, "failed to get reset GPIO\n"); + return PTR_ERR(lcd->reset_gpio); + } + + ret = acx565akm_detect(lcd); + if (ret < 0) { + dev_err(&spi->dev, "panel detection failed\n"); + return ret; + } + + if (lcd->has_bc) { + ret = acx565akm_backlight_init(lcd); + if (ret < 0) + return ret; + } + + drm_panel_init(&lcd->panel); + lcd->panel.dev = &lcd->spi->dev; + lcd->panel.funcs = &acx565akm_funcs; + + ret = drm_panel_add(&lcd->panel); + if (ret < 0) { + if (lcd->has_bc) + acx565akm_backlight_cleanup(lcd); + return ret; + } + + return 0; +} + +static int acx565akm_remove(struct spi_device *spi) +{ + struct acx565akm_panel *lcd = spi_get_drvdata(spi); + + drm_panel_remove(&lcd->panel); + + if (lcd->has_bc) + acx565akm_backlight_cleanup(lcd); + + drm_panel_disable(&lcd->panel); + drm_panel_unprepare(&lcd->panel); + + return 0; +} + +static const struct of_device_id acx565akm_of_match[] = { + { .compatible = "sony,acx565akm", }, + { /* sentinel */ }, +}; + +MODULE_DEVICE_TABLE(of, acx565akm_of_match); + +static struct spi_driver acx565akm_driver = { + .probe = acx565akm_probe, + .remove = acx565akm_remove, + .driver = { + .name = "panel-sony-acx565akm", + .of_match_table = acx565akm_of_match, + }, +}; + +module_spi_driver(acx565akm_driver); + +MODULE_ALIAS("spi:sony,acx565akm"); +MODULE_AUTHOR("Nokia Corporation"); +MODULE_DESCRIPTION("Sony ACX565AKM LCD Panel Driver"); +MODULE_LICENSE("GPL"); |