diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 121 |
1 files changed, 90 insertions, 31 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index d514719f65e2..5908cd563400 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2245,6 +2245,33 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, } static int +intel_finish_fb(struct drm_framebuffer *old_fb) +{ + struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj; + struct drm_i915_private *dev_priv = obj->base.dev->dev_private; + bool was_interruptible = dev_priv->mm.interruptible; + int ret; + + wait_event(dev_priv->pending_flip_queue, + atomic_read(&dev_priv->mm.wedged) || + atomic_read(&obj->pending_flip) == 0); + + /* Big Hammer, we also need to ensure that any pending + * MI_WAIT_FOR_EVENT inside a user batch buffer on the + * current scanout is retired before unpinning the old + * framebuffer. + * + * This should only fail upon a hung GPU, in which case we + * can safely continue. + */ + dev_priv->mm.interruptible = false; + ret = i915_gem_object_finish_gpu(obj); + dev_priv->mm.interruptible = was_interruptible; + + return ret; +} + +static int intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb) { @@ -2282,25 +2309,8 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, return ret; } - if (old_fb) { - struct drm_i915_private *dev_priv = dev->dev_private; - struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj; - - wait_event(dev_priv->pending_flip_queue, - atomic_read(&dev_priv->mm.wedged) || - atomic_read(&obj->pending_flip) == 0); - - /* Big Hammer, we also need to ensure that any pending - * MI_WAIT_FOR_EVENT inside a user batch buffer on the - * current scanout is retired before unpinning the old - * framebuffer. - * - * This should only fail upon a hung GPU, in which case we - * can safely continue. - */ - ret = i915_gem_object_finish_gpu(obj); - (void) ret; - } + if (old_fb) + intel_finish_fb(old_fb); ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y, LEAVE_ATOMIC_MODE_SET); @@ -3371,6 +3381,23 @@ static void intel_crtc_disable(struct drm_crtc *crtc) struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; struct drm_device *dev = crtc->dev; + /* Flush any pending WAITs before we disable the pipe. Note that + * we need to drop the struct_mutex in order to acquire it again + * during the lowlevel dpms routines around a couple of the + * operations. It does not look trivial nor desirable to move + * that locking higher. So instead we leave a window for the + * submission of further commands on the fb before we can actually + * disable it. This race with userspace exists anyway, and we can + * only rely on the pipe being disabled by userspace after it + * receives the hotplug notification and has flushed any pending + * batches. + */ + if (crtc->fb) { + mutex_lock(&dev->struct_mutex); + intel_finish_fb(crtc->fb); + mutex_unlock(&dev->struct_mutex); + } + crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane); assert_pipe_disabled(dev->dev_private, to_intel_crtc(crtc)->pipe); @@ -3451,8 +3478,11 @@ static bool intel_crtc_mode_fixup(struct drm_crtc *crtc, return false; } - /* All interlaced capable intel hw wants timings in frames. */ - drm_mode_set_crtcinfo(adjusted_mode, 0); + /* All interlaced capable intel hw wants timings in frames. Note though + * that intel_lvds_mode_fixup does some funny tricks with the crtc + * timings, so we need to be careful not to clobber these.*/ + if (!(adjusted_mode->private_flags & INTEL_MODE_CRTC_TIMINGS_SET)) + drm_mode_set_crtcinfo(adjusted_mode, 0); return true; } @@ -5539,7 +5569,8 @@ void ironlake_init_pch_refclk(struct drm_device *dev) if (intel_panel_use_ssc(dev_priv) && can_ssc) { DRM_DEBUG_KMS("Using SSC on panel\n"); temp |= DREF_SSC1_ENABLE; - } + } else + temp &= ~DREF_SSC1_ENABLE; /* Get SSC going before enabling the outputs */ I915_WRITE(PCH_DREF_CONTROL, temp); @@ -7437,7 +7468,13 @@ static int intel_gen6_queue_flip(struct drm_device *dev, OUT_RING(fb->pitches[0] | obj->tiling_mode); OUT_RING(obj->gtt_offset); - pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE; + /* Contrary to the suggestions in the documentation, + * "Enable Panel Fitter" does not seem to be required when page + * flipping with a non-native mode, and worse causes a normal + * modeset to fail. + * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE; + */ + pf = 0; pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff; OUT_RING(pf | pipesrc); ADVANCE_LP_RING(); @@ -7580,6 +7617,12 @@ static void intel_sanitize_modesetting(struct drm_device *dev, struct drm_i915_private *dev_priv = dev->dev_private; u32 reg, val; + /* Clear any frame start delays used for debugging left by the BIOS */ + for_each_pipe(pipe) { + reg = PIPECONF(pipe); + I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK); + } + if (HAS_PCH_SPLIT(dev)) return; @@ -8215,7 +8258,7 @@ void intel_init_emon(struct drm_device *dev) dev_priv->corr = (lcfuse & LCFUSE_HIV_MASK); } -static bool intel_enable_rc6(struct drm_device *dev) +static int intel_enable_rc6(struct drm_device *dev) { /* * Respect the kernel parameter if it is set @@ -8233,11 +8276,11 @@ static bool intel_enable_rc6(struct drm_device *dev) * Disable rc6 on Sandybridge */ if (INTEL_INFO(dev)->gen == 6) { - DRM_DEBUG_DRIVER("Sandybridge: RC6 disabled\n"); - return 0; + DRM_DEBUG_DRIVER("Sandybridge: deep RC6 disabled\n"); + return INTEL_RC6_ENABLE; } - DRM_DEBUG_DRIVER("RC6 enabled\n"); - return 1; + DRM_DEBUG_DRIVER("RC6 and deep RC6 enabled\n"); + return (INTEL_RC6_ENABLE | INTEL_RC6p_ENABLE); } void gen6_enable_rps(struct drm_i915_private *dev_priv) @@ -8247,6 +8290,7 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv) u32 pcu_mbox, rc6_mask = 0; u32 gtfifodbg; int cur_freq, min_freq, max_freq; + int rc6_mode; int i; /* Here begins a magic sequence of register writes to enable @@ -8284,9 +8328,20 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv) I915_WRITE(GEN6_RC6p_THRESHOLD, 100000); I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */ - if (intel_enable_rc6(dev_priv->dev)) - rc6_mask = GEN6_RC_CTL_RC6_ENABLE | - ((IS_GEN7(dev_priv->dev)) ? GEN6_RC_CTL_RC6p_ENABLE : 0); + rc6_mode = intel_enable_rc6(dev_priv->dev); + if (rc6_mode & INTEL_RC6_ENABLE) + rc6_mask |= GEN6_RC_CTL_RC6_ENABLE; + + if (rc6_mode & INTEL_RC6p_ENABLE) + rc6_mask |= GEN6_RC_CTL_RC6p_ENABLE; + + if (rc6_mode & INTEL_RC6pp_ENABLE) + rc6_mask |= GEN6_RC_CTL_RC6pp_ENABLE; + + DRM_INFO("Enabling RC6 states: RC6 %s, RC6p %s, RC6pp %s\n", + (rc6_mode & INTEL_RC6_ENABLE) ? "on" : "off", + (rc6_mode & INTEL_RC6p_ENABLE) ? "on" : "off", + (rc6_mode & INTEL_RC6pp_ENABLE) ? "on" : "off"); I915_WRITE(GEN6_RC_CONTROL, rc6_mask | @@ -8510,6 +8565,10 @@ static void gen6_init_clock_gating(struct drm_device *dev) I915_WRITE(WM2_LP_ILK, 0); I915_WRITE(WM1_LP_ILK, 0); + I915_WRITE(GEN6_UCGCTL1, + I915_READ(GEN6_UCGCTL1) | + GEN6_BLBUNIT_CLOCK_GATE_DISABLE); + /* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock * gating disable must be set. Failure to set it results in * flickering pixels due to Z write ordering failures after |