1 files changed, 161 insertions, 39 deletions

diff --git a/drivers/gpu/drm/i915/intel_device_info.c b/drivers/gpu/drm/i915/intel_device_info.c
index 875d428ea75f..d28592e43512 100644
--- a/drivers/gpu/drm/i915/intel_device_info.c
+++ b/drivers/gpu/drm/i915/intel_device_info.c
@@ -22,6 +22,9 @@
  *
  */
 
+#include <drm/drm_print.h>
+
+#include "intel_device_info.h"
 #include "i915_drv.h"
 
 #define PLATFORM_NAME(x) [INTEL_##x] = #x
@@ -67,21 +70,55 @@ const char *intel_platform_name(enum intel_platform platform)
 	return platform_names[platform];
 }
 
-void intel_device_info_dump(struct drm_i915_private *dev_priv)
+void intel_device_info_dump_flags(const struct intel_device_info *info,
+				  struct drm_printer *p)
 {
-	const struct intel_device_info *info = &dev_priv->info;
-
-	DRM_DEBUG_DRIVER("i915 device info: platform=%s gen=%i pciid=0x%04x rev=0x%02x",
-			 intel_platform_name(info->platform),
-			 info->gen,
-			 dev_priv->drm.pdev->device,
-			 dev_priv->drm.pdev->revision);
-#define PRINT_FLAG(name) \
-	DRM_DEBUG_DRIVER("i915 device info: " #name ": %s", yesno(info->name))
+#define PRINT_FLAG(name) drm_printf(p, "%s: %s\n", #name, yesno(info->name));
 	DEV_INFO_FOR_EACH_FLAG(PRINT_FLAG);
 #undef PRINT_FLAG
 }
 
+static void sseu_dump(const struct sseu_dev_info *sseu, struct drm_printer *p)
+{
+	drm_printf(p, "slice mask: %04x\n", sseu->slice_mask);
+	drm_printf(p, "slice total: %u\n", hweight8(sseu->slice_mask));
+	drm_printf(p, "subslice total: %u\n", sseu_subslice_total(sseu));
+	drm_printf(p, "subslice mask %04x\n", sseu->subslice_mask);
+	drm_printf(p, "subslice per slice: %u\n",
+		   hweight8(sseu->subslice_mask));
+	drm_printf(p, "EU total: %u\n", sseu->eu_total);
+	drm_printf(p, "EU per subslice: %u\n", sseu->eu_per_subslice);
+	drm_printf(p, "has slice power gating: %s\n",
+		   yesno(sseu->has_slice_pg));
+	drm_printf(p, "has subslice power gating: %s\n",
+		   yesno(sseu->has_subslice_pg));
+	drm_printf(p, "has EU power gating: %s\n", yesno(sseu->has_eu_pg));
+}
+
+void intel_device_info_dump_runtime(const struct intel_device_info *info,
+				    struct drm_printer *p)
+{
+	sseu_dump(&info->sseu, p);
+
+	drm_printf(p, "CS timestamp frequency: %u kHz\n",
+		   info->cs_timestamp_frequency_khz);
+}
+
+void intel_device_info_dump(const struct intel_device_info *info,
+			    struct drm_printer *p)
+{
+	struct drm_i915_private *dev_priv =
+		container_of(info, struct drm_i915_private, info);
+
+	drm_printf(p, "pciid=0x%04x rev=0x%02x platform=%s gen=%i\n",
+		   INTEL_DEVID(dev_priv),
+		   INTEL_REVID(dev_priv),
+		   intel_platform_name(info->platform),
+		   info->gen);
+
+	intel_device_info_dump_flags(info, p);
+}
+
 static void gen10_sseu_info_init(struct drm_i915_private *dev_priv)
 {
 	struct sseu_dev_info *sseu = &mkwrite_device_info(dev_priv)->sseu;
@@ -235,16 +272,6 @@ static void gen9_sseu_info_init(struct drm_i915_private *dev_priv)
 #define IS_SS_DISABLED(ss)	(!(sseu->subslice_mask & BIT(ss)))
 		info->has_pooled_eu = hweight8(sseu->subslice_mask) == 3;
 
-		/*
-		 * There is a HW issue in 2x6 fused down parts that requires
-		 * Pooled EU to be enabled as a WA. The pool configuration
-		 * changes depending upon which subslice is fused down. This
-		 * doesn't affect if the device has all 3 subslices enabled.
-		 */
-		/* WaEnablePooledEuFor2x6:bxt */
-		info->has_pooled_eu |= (hweight8(sseu->subslice_mask) == 2 &&
-					IS_BXT_REVID(dev_priv, 0, BXT_REVID_B_LAST));
-
 		sseu->min_eu_in_pool = 0;
 		if (info->has_pooled_eu) {
 			if (IS_SS_DISABLED(2) || IS_SS_DISABLED(0))
@@ -329,7 +356,111 @@ static void broadwell_sseu_info_init(struct drm_i915_private *dev_priv)
 	sseu->has_eu_pg = 0;
 }
 
-/*
+static u32 read_reference_ts_freq(struct drm_i915_private *dev_priv)
+{
+	u32 ts_override = I915_READ(GEN9_TIMESTAMP_OVERRIDE);
+	u32 base_freq, frac_freq;
+
+	base_freq = ((ts_override & GEN9_TIMESTAMP_OVERRIDE_US_COUNTER_DIVIDER_MASK) >>
+		     GEN9_TIMESTAMP_OVERRIDE_US_COUNTER_DIVIDER_SHIFT) + 1;
+	base_freq *= 1000;
+
+	frac_freq = ((ts_override &
+		      GEN9_TIMESTAMP_OVERRIDE_US_COUNTER_DENOMINATOR_MASK) >>
+		     GEN9_TIMESTAMP_OVERRIDE_US_COUNTER_DENOMINATOR_SHIFT);
+	frac_freq = 1000 / (frac_freq + 1);
+
+	return base_freq + frac_freq;
+}
+
+static u32 read_timestamp_frequency(struct drm_i915_private *dev_priv)
+{
+	u32 f12_5_mhz = 12500;
+	u32 f19_2_mhz = 19200;
+	u32 f24_mhz = 24000;
+
+	if (INTEL_GEN(dev_priv) <= 4) {
+		/* PRMs say:
+		 *
+		 *     "The value in this register increments once every 16
+		 *      hclks." (through the “Clocking Configuration”
+		 *      (“CLKCFG”) MCHBAR register)
+		 */
+		return dev_priv->rawclk_freq / 16;
+	} else if (INTEL_GEN(dev_priv) <= 8) {
+		/* PRMs say:
+		 *
+		 *     "The PCU TSC counts 10ns increments; this timestamp
+		 *      reflects bits 38:3 of the TSC (i.e. 80ns granularity,
+		 *      rolling over every 1.5 hours).
+		 */
+		return f12_5_mhz;
+	} else if (INTEL_GEN(dev_priv) <= 9) {
+		u32 ctc_reg = I915_READ(CTC_MODE);
+		u32 freq = 0;
+
+		if ((ctc_reg & CTC_SOURCE_PARAMETER_MASK) == CTC_SOURCE_DIVIDE_LOGIC) {
+			freq = read_reference_ts_freq(dev_priv);
+		} else {
+			freq = IS_GEN9_LP(dev_priv) ? f19_2_mhz : f24_mhz;
+
+			/* Now figure out how the command stream's timestamp
+			 * register increments from this frequency (it might
+			 * increment only every few clock cycle).
+			 */
+			freq >>= 3 - ((ctc_reg & CTC_SHIFT_PARAMETER_MASK) >>
+				      CTC_SHIFT_PARAMETER_SHIFT);
+		}
+
+		return freq;
+	} else if (INTEL_GEN(dev_priv) <= 10) {
+		u32 ctc_reg = I915_READ(CTC_MODE);
+		u32 freq = 0;
+		u32 rpm_config_reg = 0;
+
+		/* First figure out the reference frequency. There are 2 ways
+		 * we can compute the frequency, either through the
+		 * TIMESTAMP_OVERRIDE register or through RPM_CONFIG. CTC_MODE
+		 * tells us which one we should use.
+		 */
+		if ((ctc_reg & CTC_SOURCE_PARAMETER_MASK) == CTC_SOURCE_DIVIDE_LOGIC) {
+			freq = read_reference_ts_freq(dev_priv);
+		} else {
+			u32 crystal_clock;
+
+			rpm_config_reg = I915_READ(RPM_CONFIG0);
+			crystal_clock = (rpm_config_reg &
+					 GEN9_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_MASK) >>
+				GEN9_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_SHIFT;
+			switch (crystal_clock) {
+			case GEN9_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_19_2_MHZ:
+				freq = f19_2_mhz;
+				break;
+			case GEN9_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_24_MHZ:
+				freq = f24_mhz;
+				break;
+			}
+
+			/* Now figure out how the command stream's timestamp
+			 * register increments from this frequency (it might
+			 * increment only every few clock cycle).
+			 */
+			freq >>= 3 - ((rpm_config_reg &
+				       GEN10_RPM_CONFIG0_CTC_SHIFT_PARAMETER_MASK) >>
+				      GEN10_RPM_CONFIG0_CTC_SHIFT_PARAMETER_SHIFT);
+		}
+
+		return freq;
+	}
+
+	MISSING_CASE("Unknown gen, unable to read command streamer timestamp frequency\n");
+	return 0;
+}
+
+/**
+ * intel_device_info_runtime_init - initialize runtime info
+ * @info: intel device info struct
+ *
  * Determine various intel_device_info fields at runtime.
  *
  * Use it when either:
@@ -342,12 +473,16 @@ static void broadwell_sseu_info_init(struct drm_i915_private *dev_priv)
  *   - after the PCH has been detected,
  *   - before the first usage of the fields it can tweak.
  */
-void intel_device_info_runtime_init(struct drm_i915_private *dev_priv)
+void intel_device_info_runtime_init(struct intel_device_info *info)
 {
-	struct intel_device_info *info = mkwrite_device_info(dev_priv);
+	struct drm_i915_private *dev_priv =
+		container_of(info, struct drm_i915_private, info);
 	enum pipe pipe;
 
-	if (INTEL_GEN(dev_priv) >= 9) {
+	if (INTEL_GEN(dev_priv) >= 10) {
+		for_each_pipe(dev_priv, pipe)
+			info->num_scalers[pipe] = 2;
+	} else if (INTEL_GEN(dev_priv) == 9) {
 		info->num_scalers[PIPE_A] = 2;
 		info->num_scalers[PIPE_B] = 2;
 		info->num_scalers[PIPE_C] = 1;
@@ -447,19 +582,6 @@ void intel_device_info_runtime_init(struct drm_i915_private *dev_priv)
 	else if (INTEL_GEN(dev_priv) >= 10)
 		gen10_sseu_info_init(dev_priv);
 
-	DRM_DEBUG_DRIVER("slice mask: %04x\n", info->sseu.slice_mask);
-	DRM_DEBUG_DRIVER("slice total: %u\n", hweight8(info->sseu.slice_mask));
-	DRM_DEBUG_DRIVER("subslice total: %u\n",
-			 sseu_subslice_total(&info->sseu));
-	DRM_DEBUG_DRIVER("subslice mask %04x\n", info->sseu.subslice_mask);
-	DRM_DEBUG_DRIVER("subslice per slice: %u\n",
-			 hweight8(info->sseu.subslice_mask));
-	DRM_DEBUG_DRIVER("EU total: %u\n", info->sseu.eu_total);
-	DRM_DEBUG_DRIVER("EU per subslice: %u\n", info->sseu.eu_per_subslice);
-	DRM_DEBUG_DRIVER("has slice power gating: %s\n",
-			 info->sseu.has_slice_pg ? "y" : "n");
-	DRM_DEBUG_DRIVER("has subslice power gating: %s\n",
-			 info->sseu.has_subslice_pg ? "y" : "n");
-	DRM_DEBUG_DRIVER("has EU power gating: %s\n",
-			 info->sseu.has_eu_pg ? "y" : "n");
+	/* Initialize command stream timestamp frequency */
+	info->cs_timestamp_frequency_khz = read_timestamp_frequency(dev_priv);
 }