diff options
Diffstat (limited to 'drivers/gpu/drm/i915/i915_reg.h')
| -rw-r--r-- | drivers/gpu/drm/i915/i915_reg.h | 708 |
1 files changed, 439 insertions, 269 deletions
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 2d6b62e42daf..f2326fc60ac9 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -147,15 +147,9 @@ #define VGA_MSR_MEM_EN (1<<1) #define VGA_MSR_CGA_MODE (1<<0) -/* - * SR01 is the only VGA register touched on non-UMS setups. - * VLV doesn't do UMS, so the sequencer index/data registers - * are the only VGA registers which need to include - * display_mmio_offset. - */ -#define VGA_SR_INDEX (dev_priv->info->display_mmio_offset + 0x3c4) +#define VGA_SR_INDEX 0x3c4 #define SR01 1 -#define VGA_SR_DATA (dev_priv->info->display_mmio_offset + 0x3c5) +#define VGA_SR_DATA 0x3c5 #define VGA_AR_INDEX 0x3c0 #define VGA_AR_VID_EN (1<<5) @@ -265,13 +259,19 @@ #define MI_SEMAPHORE_UPDATE (1<<21) #define MI_SEMAPHORE_COMPARE (1<<20) #define MI_SEMAPHORE_REGISTER (1<<18) -#define MI_SEMAPHORE_SYNC_RV (2<<16) -#define MI_SEMAPHORE_SYNC_RB (0<<16) -#define MI_SEMAPHORE_SYNC_VR (0<<16) -#define MI_SEMAPHORE_SYNC_VB (2<<16) -#define MI_SEMAPHORE_SYNC_BR (2<<16) -#define MI_SEMAPHORE_SYNC_BV (0<<16) -#define MI_SEMAPHORE_SYNC_INVALID (1<<0) +#define MI_SEMAPHORE_SYNC_VR (0<<16) /* RCS wait for VCS (RVSYNC) */ +#define MI_SEMAPHORE_SYNC_VER (1<<16) /* RCS wait for VECS (RVESYNC) */ +#define MI_SEMAPHORE_SYNC_BR (2<<16) /* RCS wait for BCS (RBSYNC) */ +#define MI_SEMAPHORE_SYNC_BV (0<<16) /* VCS wait for BCS (VBSYNC) */ +#define MI_SEMAPHORE_SYNC_VEV (1<<16) /* VCS wait for VECS (VVESYNC) */ +#define MI_SEMAPHORE_SYNC_RV (2<<16) /* VCS wait for RCS (VRSYNC) */ +#define MI_SEMAPHORE_SYNC_RB (0<<16) /* BCS wait for RCS (BRSYNC) */ +#define MI_SEMAPHORE_SYNC_VEB (1<<16) /* BCS wait for VECS (BVESYNC) */ +#define MI_SEMAPHORE_SYNC_VB (2<<16) /* BCS wait for VCS (BVSYNC) */ +#define MI_SEMAPHORE_SYNC_BVE (0<<16) /* VECS wait for BCS (VEBSYNC) */ +#define MI_SEMAPHORE_SYNC_VVE (1<<16) /* VECS wait for VCS (VEVSYNC) */ +#define MI_SEMAPHORE_SYNC_RVE (2<<16) /* VECS wait for RCS (VERSYNC) */ +#define MI_SEMAPHORE_SYNC_INVALID (3<<16) /* * 3D instructions used by the kernel */ @@ -342,33 +342,74 @@ #define DEBUG_RESET_DISPLAY (1<<9) /* - * DPIO - a special bus for various display related registers to hide behind: - * 0x800c: m1, m2, n, p1, p2, k dividers - * 0x8014: REF and SFR select - * 0x8014: N divider, VCO select - * 0x801c/3c: core clock bits - * 0x8048/68: low pass filter coefficients - * 0x8100: fast clock controls + * IOSF sideband + */ +#define VLV_IOSF_DOORBELL_REQ (VLV_DISPLAY_BASE + 0x2100) +#define IOSF_DEVFN_SHIFT 24 +#define IOSF_OPCODE_SHIFT 16 +#define IOSF_PORT_SHIFT 8 +#define IOSF_BYTE_ENABLES_SHIFT 4 +#define IOSF_BAR_SHIFT 1 +#define IOSF_SB_BUSY (1<<0) +#define IOSF_PORT_PUNIT 0x4 +#define IOSF_PORT_NC 0x11 +#define IOSF_PORT_DPIO 0x12 +#define VLV_IOSF_DATA (VLV_DISPLAY_BASE + 0x2104) +#define VLV_IOSF_ADDR (VLV_DISPLAY_BASE + 0x2108) + +#define PUNIT_OPCODE_REG_READ 6 +#define PUNIT_OPCODE_REG_WRITE 7 + +#define PUNIT_REG_GPU_LFM 0xd3 +#define PUNIT_REG_GPU_FREQ_REQ 0xd4 +#define PUNIT_REG_GPU_FREQ_STS 0xd8 +#define PUNIT_REG_MEDIA_TURBO_FREQ_REQ 0xdc + +#define PUNIT_FUSE_BUS2 0xf6 /* bits 47:40 */ +#define PUNIT_FUSE_BUS1 0xf5 /* bits 55:48 */ + +#define IOSF_NC_FB_GFX_FREQ_FUSE 0x1c +#define FB_GFX_MAX_FREQ_FUSE_SHIFT 3 +#define FB_GFX_MAX_FREQ_FUSE_MASK 0x000007f8 +#define FB_GFX_FGUARANTEED_FREQ_FUSE_SHIFT 11 +#define FB_GFX_FGUARANTEED_FREQ_FUSE_MASK 0x0007f800 +#define IOSF_NC_FB_GFX_FMAX_FUSE_HI 0x34 +#define FB_FMAX_VMIN_FREQ_HI_MASK 0x00000007 +#define IOSF_NC_FB_GFX_FMAX_FUSE_LO 0x30 +#define FB_FMAX_VMIN_FREQ_LO_SHIFT 27 +#define FB_FMAX_VMIN_FREQ_LO_MASK 0xf8000000 + +/* + * DPIO - a special bus for various display related registers to hide behind * * DPIO is VLV only. + * + * Note: digital port B is DDI0, digital pot C is DDI1 */ -#define DPIO_PKT (VLV_DISPLAY_BASE + 0x2100) -#define DPIO_RID (0<<24) -#define DPIO_OP_WRITE (1<<16) -#define DPIO_OP_READ (0<<16) -#define DPIO_PORTID (0x12<<8) -#define DPIO_BYTE (0xf<<4) -#define DPIO_BUSY (1<<0) /* status only */ -#define DPIO_DATA (VLV_DISPLAY_BASE + 0x2104) -#define DPIO_REG (VLV_DISPLAY_BASE + 0x2108) +#define DPIO_DEVFN 0 +#define DPIO_OPCODE_REG_WRITE 1 +#define DPIO_OPCODE_REG_READ 0 + #define DPIO_CTL (VLV_DISPLAY_BASE + 0x2110) #define DPIO_MODSEL1 (1<<3) /* if ref clk b == 27 */ #define DPIO_MODSEL0 (1<<2) /* if ref clk a == 27 */ #define DPIO_SFR_BYPASS (1<<1) #define DPIO_RESET (1<<0) +#define _DPIO_TX3_SWING_CTL4_A 0x690 +#define _DPIO_TX3_SWING_CTL4_B 0x2a90 +#define DPIO_TX3_SWING_CTL4(pipe) _PIPE(pipe, _DPIO_TX_SWING_CTL4_A, \ + _DPIO_TX3_SWING_CTL4_B) + +/* + * Per pipe/PLL DPIO regs + */ #define _DPIO_DIV_A 0x800c #define DPIO_POST_DIV_SHIFT (28) /* 3 bits */ +#define DPIO_POST_DIV_DAC 0 +#define DPIO_POST_DIV_HDMIDP 1 /* DAC 225-400M rate */ +#define DPIO_POST_DIV_LVDS1 2 +#define DPIO_POST_DIV_LVDS2 3 #define DPIO_K_SHIFT (24) /* 4 bits */ #define DPIO_P1_SHIFT (21) /* 3 bits */ #define DPIO_P2_SHIFT (16) /* 5 bits */ @@ -394,14 +435,111 @@ #define _DPIO_CORE_CLK_B 0x803c #define DPIO_CORE_CLK(pipe) _PIPE(pipe, _DPIO_CORE_CLK_A, _DPIO_CORE_CLK_B) -#define _DPIO_LFP_COEFF_A 0x8048 -#define _DPIO_LFP_COEFF_B 0x8068 -#define DPIO_LFP_COEFF(pipe) _PIPE(pipe, _DPIO_LFP_COEFF_A, _DPIO_LFP_COEFF_B) +#define _DPIO_IREF_CTL_A 0x8040 +#define _DPIO_IREF_CTL_B 0x8060 +#define DPIO_IREF_CTL(pipe) _PIPE(pipe, _DPIO_IREF_CTL_A, _DPIO_IREF_CTL_B) + +#define DPIO_IREF_BCAST 0xc044 +#define _DPIO_IREF_A 0x8044 +#define _DPIO_IREF_B 0x8064 +#define DPIO_IREF(pipe) _PIPE(pipe, _DPIO_IREF_A, _DPIO_IREF_B) + +#define _DPIO_PLL_CML_A 0x804c +#define _DPIO_PLL_CML_B 0x806c +#define DPIO_PLL_CML(pipe) _PIPE(pipe, _DPIO_PLL_CML_A, _DPIO_PLL_CML_B) + +#define _DPIO_LPF_COEFF_A 0x8048 +#define _DPIO_LPF_COEFF_B 0x8068 +#define DPIO_LPF_COEFF(pipe) _PIPE(pipe, _DPIO_LPF_COEFF_A, _DPIO_LPF_COEFF_B) + +#define DPIO_CALIBRATION 0x80ac #define DPIO_FASTCLK_DISABLE 0x8100 -#define DPIO_DATA_CHANNEL1 0x8220 -#define DPIO_DATA_CHANNEL2 0x8420 +/* + * Per DDI channel DPIO regs + */ + +#define _DPIO_PCS_TX_0 0x8200 +#define _DPIO_PCS_TX_1 0x8400 +#define DPIO_PCS_TX_LANE2_RESET (1<<16) +#define DPIO_PCS_TX_LANE1_RESET (1<<7) +#define DPIO_PCS_TX(port) _PORT(port, _DPIO_PCS_TX_0, _DPIO_PCS_TX_1) + +#define _DPIO_PCS_CLK_0 0x8204 +#define _DPIO_PCS_CLK_1 0x8404 +#define DPIO_PCS_CLK_CRI_RXEB_EIOS_EN (1<<22) +#define DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN (1<<21) +#define DPIO_PCS_CLK_DATAWIDTH_SHIFT (6) +#define DPIO_PCS_CLK_SOFT_RESET (1<<5) +#define DPIO_PCS_CLK(port) _PORT(port, _DPIO_PCS_CLK_0, _DPIO_PCS_CLK_1) + +#define _DPIO_PCS_CTL_OVR1_A 0x8224 +#define _DPIO_PCS_CTL_OVR1_B 0x8424 +#define DPIO_PCS_CTL_OVER1(port) _PORT(port, _DPIO_PCS_CTL_OVR1_A, \ + _DPIO_PCS_CTL_OVR1_B) + +#define _DPIO_PCS_STAGGER0_A 0x822c +#define _DPIO_PCS_STAGGER0_B 0x842c +#define DPIO_PCS_STAGGER0(port) _PORT(port, _DPIO_PCS_STAGGER0_A, \ + _DPIO_PCS_STAGGER0_B) + +#define _DPIO_PCS_STAGGER1_A 0x8230 +#define _DPIO_PCS_STAGGER1_B 0x8430 +#define DPIO_PCS_STAGGER1(port) _PORT(port, _DPIO_PCS_STAGGER1_A, \ + _DPIO_PCS_STAGGER1_B) + +#define _DPIO_PCS_CLOCKBUF0_A 0x8238 +#define _DPIO_PCS_CLOCKBUF0_B 0x8438 +#define DPIO_PCS_CLOCKBUF0(port) _PORT(port, _DPIO_PCS_CLOCKBUF0_A, \ + _DPIO_PCS_CLOCKBUF0_B) + +#define _DPIO_PCS_CLOCKBUF8_A 0x825c +#define _DPIO_PCS_CLOCKBUF8_B 0x845c +#define DPIO_PCS_CLOCKBUF8(port) _PORT(port, _DPIO_PCS_CLOCKBUF8_A, \ + _DPIO_PCS_CLOCKBUF8_B) + +#define _DPIO_TX_SWING_CTL2_A 0x8288 +#define _DPIO_TX_SWING_CTL2_B 0x8488 +#define DPIO_TX_SWING_CTL2(port) _PORT(port, _DPIO_TX_SWING_CTL2_A, \ + _DPIO_TX_SWING_CTL2_B) + +#define _DPIO_TX_SWING_CTL3_A 0x828c +#define _DPIO_TX_SWING_CTL3_B 0x848c +#define DPIO_TX_SWING_CTL3(port) _PORT(port, _DPIO_TX_SWING_CTL3_A, \ + _DPIO_TX_SWING_CTL3_B) + +#define _DPIO_TX_SWING_CTL4_A 0x8290 +#define _DPIO_TX_SWING_CTL4_B 0x8490 +#define DPIO_TX_SWING_CTL4(port) _PORT(port, _DPIO_TX_SWING_CTL4_A, \ + _DPIO_TX_SWING_CTL4_B) + +#define _DPIO_TX_OCALINIT_0 0x8294 +#define _DPIO_TX_OCALINIT_1 0x8494 +#define DPIO_TX_OCALINIT_EN (1<<31) +#define DPIO_TX_OCALINIT(port) _PORT(port, _DPIO_TX_OCALINIT_0, \ + _DPIO_TX_OCALINIT_1) + +#define _DPIO_TX_CTL_0 0x82ac +#define _DPIO_TX_CTL_1 0x84ac +#define DPIO_TX_CTL(port) _PORT(port, _DPIO_TX_CTL_0, _DPIO_TX_CTL_1) + +#define _DPIO_TX_LANE_0 0x82b8 +#define _DPIO_TX_LANE_1 0x84b8 +#define DPIO_TX_LANE(port) _PORT(port, _DPIO_TX_LANE_0, _DPIO_TX_LANE_1) + +#define _DPIO_DATA_CHANNEL1 0x8220 +#define _DPIO_DATA_CHANNEL2 0x8420 +#define DPIO_DATA_CHANNEL(port) _PORT(port, _DPIO_DATA_CHANNEL1, _DPIO_DATA_CHANNEL2) + +#define _DPIO_PORT0_PCS0 0x0220 +#define _DPIO_PORT0_PCS1 0x0420 +#define _DPIO_PORT1_PCS2 0x2620 +#define _DPIO_PORT1_PCS3 0x2820 +#define DPIO_DATA_LANE_A(port) _PORT(port, _DPIO_PORT0_PCS0, _DPIO_PORT1_PCS2) +#define DPIO_DATA_LANE_B(port) _PORT(port, _DPIO_PORT0_PCS1, _DPIO_PORT1_PCS3) +#define DPIO_DATA_CHANNEL1 0x8220 +#define DPIO_DATA_CHANNEL2 0x8420 /* * Fence registers @@ -443,6 +581,7 @@ #define RENDER_RING_BASE 0x02000 #define BSD_RING_BASE 0x04000 #define GEN6_BSD_RING_BASE 0x12000 +#define VEBOX_RING_BASE 0x1a000 #define BLT_RING_BASE 0x22000 #define RING_TAIL(base) ((base)+0x30) #define RING_HEAD(base) ((base)+0x34) @@ -450,12 +589,20 @@ #define RING_CTL(base) ((base)+0x3c) #define RING_SYNC_0(base) ((base)+0x40) #define RING_SYNC_1(base) ((base)+0x44) -#define GEN6_RVSYNC (RING_SYNC_0(RENDER_RING_BASE)) -#define GEN6_RBSYNC (RING_SYNC_1(RENDER_RING_BASE)) -#define GEN6_VRSYNC (RING_SYNC_1(GEN6_BSD_RING_BASE)) -#define GEN6_VBSYNC (RING_SYNC_0(GEN6_BSD_RING_BASE)) -#define GEN6_BRSYNC (RING_SYNC_0(BLT_RING_BASE)) -#define GEN6_BVSYNC (RING_SYNC_1(BLT_RING_BASE)) +#define RING_SYNC_2(base) ((base)+0x48) +#define GEN6_RVSYNC (RING_SYNC_0(RENDER_RING_BASE)) +#define GEN6_RBSYNC (RING_SYNC_1(RENDER_RING_BASE)) +#define GEN6_RVESYNC (RING_SYNC_2(RENDER_RING_BASE)) +#define GEN6_VBSYNC (RING_SYNC_0(GEN6_BSD_RING_BASE)) +#define GEN6_VRSYNC (RING_SYNC_1(GEN6_BSD_RING_BASE)) +#define GEN6_VVESYNC (RING_SYNC_2(GEN6_BSD_RING_BASE)) +#define GEN6_BRSYNC (RING_SYNC_0(BLT_RING_BASE)) +#define GEN6_BVSYNC (RING_SYNC_1(BLT_RING_BASE)) +#define GEN6_BVESYNC (RING_SYNC_2(BLT_RING_BASE)) +#define GEN6_VEBSYNC (RING_SYNC_0(VEBOX_RING_BASE)) +#define GEN6_VERSYNC (RING_SYNC_1(VEBOX_RING_BASE)) +#define GEN6_VEVSYNC (RING_SYNC_2(VEBOX_RING_BASE)) +#define GEN6_NOSYNC 0 #define RING_MAX_IDLE(base) ((base)+0x54) #define RING_HWS_PGA(base) ((base)+0x80) #define RING_HWS_PGA_GEN6(base) ((base)+0x2080) @@ -467,6 +614,7 @@ #define DONE_REG 0x40b0 #define BSD_HWS_PGA_GEN7 (0x04180) #define BLT_HWS_PGA_GEN7 (0x04280) +#define VEBOX_HWS_PGA_GEN7 (0x04380) #define RING_ACTHD(base) ((base)+0x74) #define RING_NOPID(base) ((base)+0x94) #define RING_IMR(base) ((base)+0xa8) @@ -527,7 +675,11 @@ #define ERROR_GEN6 0x040a0 #define GEN7_ERR_INT 0x44040 -#define ERR_INT_MMIO_UNCLAIMED (1<<13) +#define ERR_INT_POISON (1<<31) +#define ERR_INT_MMIO_UNCLAIMED (1<<13) +#define ERR_INT_FIFO_UNDERRUN_C (1<<6) +#define ERR_INT_FIFO_UNDERRUN_B (1<<3) +#define ERR_INT_FIFO_UNDERRUN_A (1<<0) #define FPGA_DBG 0x42300 #define FPGA_DBG_RM_NOCLAIM (1<<31) @@ -583,24 +735,7 @@ #define VLV_IIR (VLV_DISPLAY_BASE + 0x20a4) #define VLV_IMR (VLV_DISPLAY_BASE + 0x20a8) #define VLV_ISR (VLV_DISPLAY_BASE + 0x20ac) -#define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18) -#define I915_DISPLAY_PORT_INTERRUPT (1<<17) -#define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15) -#define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14) /* p-state */ -#define I915_HWB_OOM_INTERRUPT (1<<13) -#define I915_SYNC_STATUS_INTERRUPT (1<<12) -#define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT (1<<11) -#define I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT (1<<10) -#define I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT (1<<9) -#define I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT (1<<8) -#define I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT (1<<7) -#define I915_DISPLAY_PIPE_A_EVENT_INTERRUPT (1<<6) -#define I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT (1<<5) -#define I915_DISPLAY_PIPE_B_EVENT_INTERRUPT (1<<4) -#define I915_DEBUG_INTERRUPT (1<<2) -#define I915_USER_INTERRUPT (1<<1) -#define I915_ASLE_INTERRUPT (1<<0) -#define I915_BSD_USER_INTERRUPT (1<<25) +#define VLV_PCBR (VLV_DISPLAY_BASE + 0x2120) #define DISPLAY_PLANE_FLIP_PENDING(plane) (1<<(11-(plane))) /* A and B only */ #define EIR 0x020b0 #define EMR 0x020b4 @@ -712,28 +847,6 @@ #define CACHE_MODE_1 0x7004 /* IVB+ */ #define PIXEL_SUBSPAN_COLLECT_OPT_DISABLE (1<<6) -/* GEN6 interrupt control - * Note that the per-ring interrupt bits do alias with the global interrupt bits - * in GTIMR. */ -#define GEN6_RENDER_HWSTAM 0x2098 -#define GEN6_RENDER_IMR 0x20a8 -#define GEN6_RENDER_CONTEXT_SWITCH_INTERRUPT (1 << 8) -#define GEN6_RENDER_PPGTT_PAGE_FAULT (1 << 7) -#define GEN6_RENDER_TIMEOUT_COUNTER_EXPIRED (1 << 6) -#define GEN6_RENDER_L3_PARITY_ERROR (1 << 5) -#define GEN6_RENDER_PIPE_CONTROL_NOTIFY_INTERRUPT (1 << 4) -#define GEN6_RENDER_COMMAND_PARSER_MASTER_ERROR (1 << 3) -#define GEN6_RENDER_SYNC_STATUS (1 << 2) -#define GEN6_RENDER_DEBUG_INTERRUPT (1 << 1) -#define GEN6_RENDER_USER_INTERRUPT (1 << 0) - -#define GEN6_BLITTER_HWSTAM 0x22098 -#define GEN6_BLITTER_IMR 0x220a8 -#define GEN6_BLITTER_MI_FLUSH_DW_NOTIFY_INTERRUPT (1 << 26) -#define GEN6_BLITTER_COMMAND_PARSER_MASTER_ERROR (1 << 25) -#define GEN6_BLITTER_SYNC_STATUS (1 << 24) -#define GEN6_BLITTER_USER_INTERRUPT (1 << 22) - #define GEN6_BLITTER_ECOSKPD 0x221d0 #define GEN6_BLITTER_LOCK_SHIFT 16 #define GEN6_BLITTER_FBC_NOTIFY (1<<3) @@ -744,9 +857,52 @@ #define GEN6_BSD_SLEEP_INDICATOR (1 << 3) #define GEN6_BSD_GO_INDICATOR (1 << 4) -#define GEN6_BSD_HWSTAM 0x12098 -#define GEN6_BSD_IMR 0x120a8 -#define GEN6_BSD_USER_INTERRUPT (1 << 12) +/* On modern GEN architectures interrupt control consists of two sets + * of registers. The first set pertains to the ring generating the + * interrupt. The second control is for the functional block generating the + * interrupt. These are PM, GT, DE, etc. + * + * Luckily *knocks on wood* all the ring interrupt bits match up with the + * GT interrupt bits, so we don't need to duplicate the defines. + * + * These defines should cover us well from SNB->HSW with minor exceptions + * it can also work on ILK. + */ +#define GT_BLT_FLUSHDW_NOTIFY_INTERRUPT (1 << 26) +#define GT_BLT_CS_ERROR_INTERRUPT (1 << 25) +#define GT_BLT_USER_INTERRUPT (1 << 22) +#define GT_BSD_CS_ERROR_INTERRUPT (1 << 15) +#define GT_BSD_USER_INTERRUPT (1 << 12) +#define GT_RENDER_L3_PARITY_ERROR_INTERRUPT (1 << 5) /* !snb */ +#define GT_RENDER_PIPECTL_NOTIFY_INTERRUPT (1 << 4) +#define GT_RENDER_CS_MASTER_ERROR_INTERRUPT (1 << 3) +#define GT_RENDER_SYNC_STATUS_INTERRUPT (1 << 2) +#define GT_RENDER_DEBUG_INTERRUPT (1 << 1) +#define GT_RENDER_USER_INTERRUPT (1 << 0) + +#define PM_VEBOX_CS_ERROR_INTERRUPT (1 << 12) /* hsw+ */ +#define PM_VEBOX_USER_INTERRUPT (1 << 10) /* hsw+ */ + +/* These are all the "old" interrupts */ +#define ILK_BSD_USER_INTERRUPT (1<<5) +#define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18) +#define I915_DISPLAY_PORT_INTERRUPT (1<<17) +#define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15) +#define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14) /* p-state */ +#define I915_HWB_OOM_INTERRUPT (1<<13) +#define I915_SYNC_STATUS_INTERRUPT (1<<12) +#define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT (1<<11) +#define I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT (1<<10) +#define I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT (1<<9) +#define I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT (1<<8) +#define I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT (1<<7) +#define I915_DISPLAY_PIPE_A_EVENT_INTERRUPT (1<<6) +#define I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT (1<<5) +#define I915_DISPLAY_PIPE_B_EVENT_INTERRUPT (1<<4) +#define I915_DEBUG_INTERRUPT (1<<2) +#define I915_USER_INTERRUPT (1<<1) +#define I915_ASLE_INTERRUPT (1<<0) +#define I915_BSD_USER_INTERRUPT (1 << 25) #define GEN6_BSD_RNCID 0x12198 @@ -807,7 +963,9 @@ #define DPFC_CTL_EN (1<<31) #define DPFC_CTL_PLANEA (0<<30) #define DPFC_CTL_PLANEB (1<<30) +#define IVB_DPFC_CTL_PLANE_SHIFT (29) #define DPFC_CTL_FENCE_EN (1<<29) +#define IVB_DPFC_CTL_FENCE_EN (1<<28) #define DPFC_CTL_PERSISTENT_MODE (1<<25) #define DPFC_SR_EN (1<<10) #define DPFC_CTL_LIMIT_1X (0<<6) @@ -840,6 +998,7 @@ #define ILK_DPFC_CHICKEN 0x43224 #define ILK_FBC_RT_BASE 0x2128 #define ILK_FBC_RT_VALID (1<<0) +#define SNB_FBC_FRONT_BUFFER (1<<1) #define ILK_DISPLAY_CHICKEN1 0x42000 #define ILK_FBCQ_DIS (1<<22) @@ -855,6 +1014,25 @@ #define SNB_CPU_FENCE_ENABLE (1<<29) #define DPFC_CPU_FENCE_OFFSET 0x100104 +/* Framebuffer compression for Ivybridge */ +#define IVB_FBC_RT_BASE 0x7020 + +#define IPS_CTL 0x43408 +#define IPS_ENABLE (1 << 31) + +#define MSG_FBC_REND_STATE 0x50380 +#define FBC_REND_NUKE (1<<2) +#define FBC_REND_CACHE_CLEAN (1<<1) + +#define _HSW_PIPE_SLICE_CHICKEN_1_A 0x420B0 +#define _HSW_PIPE_SLICE_CHICKEN_1_B 0x420B4 +#define HSW_BYPASS_FBC_QUEUE (1<<22) +#define HSW_PIPE_SLICE_CHICKEN_1(pipe) _PIPE(pipe, + \ + _HSW_PIPE_SLICE_CHICKEN_1_A, + \ + _HSW_PIPE_SLICE_CHICKEN_1_B) + +#define HSW_CLKGATE_DISABLE_PART_1 0x46500 +#define HSW_DPFC_GATING_DISABLE (1<<23) /* * GPIO regs @@ -963,7 +1141,10 @@ #define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */ #define DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW 0x00ff8000 /* Pineview */ #define DPLL_LOCK_VLV (1<<15) +#define DPLL_INTEGRATED_CRI_CLK_VLV (1<<14) #define DPLL_INTEGRATED_CLOCK_VLV (1<<13) +#define DPLL_PORTC_READY_MASK (0xf << 4) +#define DPLL_PORTB_READY_MASK (0xf) #define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000 /* @@ -1073,7 +1254,7 @@ #define DSTATE_PLL_D3_OFF (1<<3) #define DSTATE_GFX_CLOCK_GATING (1<<1) #define DSTATE_DOT_CLOCK_GATING (1<<0) -#define DSPCLK_GATE_D 0x6200 +#define DSPCLK_GATE_D (dev_priv->info->display_mmio_offset + 0x6200) # define DPUNIT_B_CLOCK_GATE_DISABLE (1 << 30) /* 965 */ # define VSUNIT_CLOCK_GATE_DISABLE (1 << 29) /* 965 */ # define VRHUNIT_CLOCK_GATE_DISABLE (1 << 28) /* 965 */ @@ -1186,6 +1367,8 @@ #define FW_BLC_SELF_VLV (VLV_DISPLAY_BASE + 0x6500) #define FW_CSPWRDWNEN (1<<15) +#define MI_ARB_VLV (VLV_DISPLAY_BASE + 0x6504) + /* * Palette regs */ @@ -1535,14 +1718,13 @@ GEN7_CXT_EXTENDED_SIZE(ctx_reg) + \ GEN7_CXT_GT1_SIZE(ctx_reg) + \ GEN7_CXT_VFSTATE_SIZE(ctx_reg)) -#define HSW_CXT_POWER_SIZE(ctx_reg) ((ctx_reg >> 26) & 0x3f) -#define HSW_CXT_RING_SIZE(ctx_reg) ((ctx_reg >> 23) & 0x7) -#define HSW_CXT_RENDER_SIZE(ctx_reg) ((ctx_reg >> 15) & 0xff) -#define HSW_CXT_TOTAL_SIZE(ctx_reg) (HSW_CXT_POWER_SIZE(ctx_reg) + \ - HSW_CXT_RING_SIZE(ctx_reg) + \ - HSW_CXT_RENDER_SIZE(ctx_reg) + \ - GEN7_CXT_VFSTATE_SIZE(ctx_reg)) - +/* Haswell does have the CXT_SIZE register however it does not appear to be + * valid. Now, docs explain in dwords what is in the context object. The full + * size is 70720 bytes, however, the power context and execlist context will + * never be saved (power context is stored elsewhere, and execlists don't work + * on HSW) - so the final size is 66944 bytes, which rounds to 17 pages. + */ +#define HSW_CXT_TOTAL_SIZE (17 * PAGE_SIZE) /* * Overlay regs @@ -1691,6 +1873,12 @@ /* SDVO is different across gen3/4 */ #define SDVOC_HOTPLUG_INT_STATUS_G4X (1 << 3) #define SDVOB_HOTPLUG_INT_STATUS_G4X (1 << 2) +/* + * Bspec seems to be seriously misleaded about the SDVO hpd bits on i965g/gm, + * since reality corrobates that they're the same as on gen3. But keep these + * bits here (and the comment!) to help any other lost wanderers back onto the + * right tracks. + */ #define SDVOC_HOTPLUG_INT_STATUS_I965 (3 << 4) #define SDVOB_HOTPLUG_INT_STATUS_I965 (3 << 2) #define SDVOC_HOTPLUG_INT_STATUS_I915 (1 << 7) @@ -1702,13 +1890,6 @@ PORTC_HOTPLUG_INT_STATUS | \ PORTD_HOTPLUG_INT_STATUS) -#define HOTPLUG_INT_STATUS_I965 (CRT_HOTPLUG_INT_STATUS | \ - SDVOB_HOTPLUG_INT_STATUS_I965 | \ - SDVOC_HOTPLUG_INT_STATUS_I965 | \ - PORTB_HOTPLUG_INT_STATUS | \ - PORTC_HOTPLUG_INT_STATUS | \ - PORTD_HOTPLUG_INT_STATUS) - #define HOTPLUG_INT_STATUS_I915 (CRT_HOTPLUG_INT_STATUS | \ SDVOB_HOTPLUG_INT_STATUS_I915 | \ SDVOC_HOTPLUG_INT_STATUS_I915 | \ @@ -1967,6 +2148,10 @@ #define BLM_PIPE_A (0 << 29) #define BLM_PIPE_B (1 << 29) #define BLM_PIPE_C (2 << 29) /* ivb + */ +#define BLM_TRANSCODER_A BLM_PIPE_A /* hsw */ +#define BLM_TRANSCODER_B BLM_PIPE_B +#define BLM_TRANSCODER_C BLM_PIPE_C +#define BLM_TRANSCODER_EDP (3 << 29) #define BLM_PIPE(pipe) ((pipe) << 29) #define BLM_POLARITY_I965 (1 << 28) /* gen4 only */ #define BLM_PHASE_IN_INTERUPT_STATUS (1 << 26) @@ -2540,9 +2725,7 @@ #define DP_PRE_EMPHASIS_SHIFT 22 /* How many wires to use. I guess 3 was too hard */ -#define DP_PORT_WIDTH_1 (0 << 19) -#define DP_PORT_WIDTH_2 (1 << 19) -#define DP_PORT_WIDTH_4 (3 << 19) +#define DP_PORT_WIDTH(width) (((width) - 1) << 19) #define DP_PORT_WIDTH_MASK (7 << 19) /* Mystic DPCD version 1.1 special mode */ @@ -2646,18 +2829,20 @@ * which is after the LUTs, so we want the bytes for our color format. * For our current usage, this is always 3, one byte for R, G and B. */ -#define _PIPEA_GMCH_DATA_M 0x70050 -#define _PIPEB_GMCH_DATA_M 0x71050 +#define _PIPEA_DATA_M_G4X 0x70050 +#define _PIPEB_DATA_M_G4X 0x71050 /* Transfer unit size for display port - 1, default is 0x3f (for TU size 64) */ #define TU_SIZE(x) (((x)-1) << 25) /* default size 64 */ +#define TU_SIZE_SHIFT 25 #define TU_SIZE_MASK (0x3f << 25) #define DATA_LINK_M_N_MASK (0xffffff) #define DATA_LINK_N_MAX (0x800000) -#define _PIPEA_GMCH_DATA_N 0x70054 -#define _PIPEB_GMCH_DATA_N 0x71054 +#define _PIPEA_DATA_N_G4X 0x70054 +#define _PIPEB_DATA_N_G4X 0x71054 +#define PIPE_GMCH_DATA_N_MASK (0xffffff) /* * Computing Link M and N values for the Display Port link @@ -2670,16 +2855,18 @@ * Attributes and VB-ID. */ -#define _PIPEA_DP_LINK_M 0x70060 -#define _PIPEB_DP_LINK_M 0x71060 +#define _PIPEA_LINK_M_G4X 0x70060 +#define _PIPEB_LINK_M_G4X 0x71060 +#define PIPEA_DP_LINK_M_MASK (0xffffff) -#define _PIPEA_DP_LINK_N 0x70064 -#define _PIPEB_DP_LINK_N 0x71064 +#define _PIPEA_LINK_N_G4X 0x70064 +#define _PIPEB_LINK_N_G4X 0x71064 +#define PIPEA_DP_LINK_N_MASK (0xffffff) -#define PIPE_GMCH_DATA_M(pipe) _PIPE(pipe, _PIPEA_GMCH_DATA_M, _PIPEB_GMCH_DATA_M) -#define PIPE_GMCH_DATA_N(pipe) _PIPE(pipe, _PIPEA_GMCH_DATA_N, _PIPEB_GMCH_DATA_N) -#define PIPE_DP_LINK_M(pipe) _PIPE(pipe, _PIPEA_DP_LINK_M, _PIPEB_DP_LINK_M) -#define PIPE_DP_LINK_N(pipe) _PIPE(pipe, _PIPEA_DP_LINK_N, _PIPEB_DP_LINK_N) +#define PIPE_DATA_M_G4X(pipe) _PIPE(pipe, _PIPEA_DATA_M_G4X, _PIPEB_DATA_M_G4X) +#define PIPE_DATA_N_G4X(pipe) _PIPE(pipe, _PIPEA_DATA_N_G4X, _PIPEB_DATA_N_G4X) +#define PIPE_LINK_M_G4X(pipe) _PIPE(pipe, _PIPEA_LINK_M_G4X, _PIPEB_LINK_M_G4X) +#define PIPE_LINK_N_G4X(pipe) _PIPE(pipe, _PIPEA_LINK_N_G4X, _PIPEB_LINK_N_G4X) /* Display & cursor control */ @@ -2715,6 +2902,7 @@ #define PIPECONF_INTERLACED_ILK (3 << 21) #define PIPECONF_INTERLACED_DBL_ILK (4 << 21) /* ilk/snb only */ #define PIPECONF_PFIT_PF_INTERLACED_DBL_ILK (5 << 21) /* ilk/snb only */ +#define PIPECONF_INTERLACE_MODE_MASK (7 << 21) #define PIPECONF_CXSR_DOWNCLOCK (1<<16) #define PIPECONF_COLOR_RANGE_SELECT (1 << 13) #define PIPECONF_BPC_MASK (0x7 << 5) @@ -2915,6 +3103,10 @@ #define WM3S_LP_IVB 0x45128 #define WM1S_LP_EN (1<<31) +#define HSW_WM_LP_VAL(lat, fbc, pri, cur) \ + (WM3_LP_EN | ((lat) << WM1_LP_LATENCY_SHIFT) | \ + ((fbc) << WM1_LP_FBC_SHIFT) | ((pri) << WM1_LP_SR_SHIFT) | (cur)) + /* Memory latency timer register */ #define MLTR_ILK 0x11222 #define MLTR_WM1_SHIFT 0 @@ -3294,7 +3486,7 @@ #define SPRGAMC(pipe) _PIPE(pipe, _SPRA_GAMC, _SPRB_GAMC) #define SPRSURFLIVE(pipe) _PIPE(pipe, _SPRA_SURFLIVE, _SPRB_SURFLIVE) -#define _SPACNTR 0x72180 +#define _SPACNTR (VLV_DISPLAY_BASE + 0x72180) #define SP_ENABLE (1<<31) #define SP_GEAMMA_ENABLE (1<<30) #define SP_PIXFORMAT_MASK (0xf<<26) @@ -3313,30 +3505,30 @@ #define SP_YUV_ORDER_YVYU (2<<16) #define SP_YUV_ORDER_VYUY (3<<16) #define SP_TILED (1<<10) -#define _SPALINOFF 0x72184 -#define _SPASTRIDE 0x72188 -#define _SPAPOS 0x7218c -#define _SPASIZE 0x72190 -#define _SPAKEYMINVAL 0x72194 -#define _SPAKEYMSK 0x72198 -#define _SPASURF 0x7219c -#define _SPAKEYMAXVAL 0x721a0 -#define _SPATILEOFF 0x721a4 -#define _SPACONSTALPHA 0x721a8 -#define _SPAGAMC 0x721f4 - -#define _SPBCNTR 0x72280 -#define _SPBLINOFF 0x72284 -#define _SPBSTRIDE 0x72288 -#define _SPBPOS 0x7228c -#define _SPBSIZE 0x72290 -#define _SPBKEYMINVAL 0x72294 -#define _SPBKEYMSK 0x72298 -#define _SPBSURF 0x7229c -#define _SPBKEYMAXVAL 0x722a0 -#define _SPBTILEOFF 0x722a4 -#define _SPBCONSTALPHA 0x722a8 -#define _SPBGAMC 0x722f4 +#define _SPALINOFF (VLV_DISPLAY_BASE + 0x72184) +#define _SPASTRIDE (VLV_DISPLAY_BASE + 0x72188) +#define _SPAPOS (VLV_DISPLAY_BASE + 0x7218c) +#define _SPASIZE (VLV_DISPLAY_BASE + 0x72190) +#define _SPAKEYMINVAL (VLV_DISPLAY_BASE + 0x72194) +#define _SPAKEYMSK (VLV_DISPLAY_BASE + 0x72198) +#define _SPASURF (VLV_DISPLAY_BASE + 0x7219c) +#define _SPAKEYMAXVAL (VLV_DISPLAY_BASE + 0x721a0) +#define _SPATILEOFF (VLV_DISPLAY_BASE + 0x721a4) +#define _SPACONSTALPHA (VLV_DISPLAY_BASE + 0x721a8) +#define _SPAGAMC (VLV_DISPLAY_BASE + 0x721f4) + +#define _SPBCNTR (VLV_DISPLAY_BASE + 0x72280) +#define _SPBLINOFF (VLV_DISPLAY_BASE + 0x72284) +#define _SPBSTRIDE (VLV_DISPLAY_BASE + 0x72288) +#define _SPBPOS (VLV_DISPLAY_BASE + 0x7228c) +#define _SPBSIZE (VLV_DISPLAY_BASE + 0x72290) +#define _SPBKEYMINVAL (VLV_DISPLAY_BASE + 0x72294) +#define _SPBKEYMSK (VLV_DISPLAY_BASE + 0x72298) +#define _SPBSURF (VLV_DISPLAY_BASE + 0x7229c) +#define _SPBKEYMAXVAL (VLV_DISPLAY_BASE + 0x722a0) +#define _SPBTILEOFF (VLV_DISPLAY_BASE + 0x722a4) +#define _SPBCONSTALPHA (VLV_DISPLAY_BASE + 0x722a8) +#define _SPBGAMC (VLV_DISPLAY_BASE + 0x722f4) #define SPCNTR(pipe, plane) _PIPE(pipe * 2 + plane, _SPACNTR, _SPBCNTR) #define SPLINOFF(pipe, plane) _PIPE(pipe * 2 + plane, _SPALINOFF, _SPBLINOFF) @@ -3474,6 +3666,15 @@ #define _LGC_PALETTE_B 0x4a800 #define LGC_PALETTE(pipe) _PIPE(pipe, _LGC_PALETTE_A, _LGC_PALETTE_B) +#define _GAMMA_MODE_A 0x4a480 +#define _GAMMA_MODE_B 0x4ac80 +#define GAMMA_MODE(pipe) _PIPE(pipe, _GAMMA_MODE_A, _GAMMA_MODE_B) +#define GAMMA_MODE_MODE_MASK (3 << 0) +#define GAMMA_MODE_MODE_8BIT (0 << 0) +#define GAMMA_MODE_MODE_10BIT (1 << 0) +#define GAMMA_MODE_MODE_12BIT (2 << 0) +#define GAMMA_MODE_MODE_SPLIT (3 << 0) + /* interrupts */ #define DE_MASTER_IRQ_CONTROL (1 << 31) #define DE_SPRITEB_FLIP_DONE (1 << 29) @@ -3502,7 +3703,7 @@ #define DE_PIPEA_FIFO_UNDERRUN (1 << 0) /* More Ivybridge lolz */ -#define DE_ERR_DEBUG_IVB (1<<30) +#define DE_ERR_INT_IVB (1<<30) #define DE_GSE_IVB (1<<29) #define DE_PCH_EVENT_IVB (1<<28) #define DE_DP_A_HOTPLUG_IVB (1<<27) @@ -3525,21 +3726,6 @@ #define DEIIR 0x44008 #define DEIER 0x4400c -/* GT interrupt. - * Note that for gen6+ the ring-specific interrupt bits do alias with the - * corresponding bits in the per-ring interrupt control registers. */ -#define GT_GEN6_BLT_FLUSHDW_NOTIFY_INTERRUPT (1 << 26) -#define GT_GEN6_BLT_CS_ERROR_INTERRUPT (1 << 25) -#define GT_GEN6_BLT_USER_INTERRUPT (1 << 22) -#define GT_GEN6_BSD_CS_ERROR_INTERRUPT (1 << 15) -#define GT_GEN6_BSD_USER_INTERRUPT (1 << 12) -#define GT_BSD_USER_INTERRUPT (1 << 5) /* ilk only */ -#define GT_GEN7_L3_PARITY_ERROR_INTERRUPT (1 << 5) -#define GT_PIPE_NOTIFY (1 << 4) -#define GT_RENDER_CS_ERROR_INTERRUPT (1 << 3) -#define GT_SYNC_STATUS (1 << 2) -#define GT_USER_INTERRUPT (1 << 0) - #define GTISR 0x44010 #define GTIMR 0x44014 #define GTIIR 0x44018 @@ -3569,6 +3755,9 @@ # define CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE (1 << 5) # define CHICKEN3_DGMG_DONE_FIX_DISABLE (1 << 2) +#define CHICKEN_PAR1_1 0x42080 +#define FORCE_ARB_IDLE_PLANES (1 << 14) + #define DISP_ARB_CTL 0x45000 #define DISP_TILE_SURFACE_SWIZZLING (1<<13) #define DISP_FBC_WM_DIS (1<<15) @@ -3661,6 +3850,7 @@ SDE_PORTC_HOTPLUG_CPT | \ SDE_PORTB_HOTPLUG_CPT) #define SDE_GMBUS_CPT (1 << 17) +#define SDE_ERROR_CPT (1 << 16) #define SDE_AUDIO_CP_REQ_C_CPT (1 << 10) #define SDE_AUDIO_CP_CHG_C_CPT (1 << 9) #define SDE_FDI_RXC_CPT (1 << 8) @@ -3685,6 +3875,12 @@ #define SDEIIR 0xc4008 #define SDEIER 0xc400c +#define SERR_INT 0xc4040 +#define SERR_INT_POISON (1<<31) +#define SERR_INT_TRANS_C_FIFO_UNDERRUN (1<<6) +#define SERR_INT_TRANS_B_FIFO_UNDERRUN (1<<3) +#define SERR_INT_TRANS_A_FIFO_UNDERRUN (1<<0) + /* digital port hotplug */ #define PCH_PORT_HOTPLUG 0xc4030 /* SHOTPLUG_CTL */ #define PORTD_HOTPLUG_ENABLE (1 << 20) @@ -3734,15 +3930,15 @@ #define _PCH_DPLL_A 0xc6014 #define _PCH_DPLL_B 0xc6018 -#define _PCH_DPLL(pll) (pll == 0 ? _PCH_DPLL_A : _PCH_DPLL_B) +#define PCH_DPLL(pll) (pll == 0 ? _PCH_DPLL_A : _PCH_DPLL_B) #define _PCH_FPA0 0xc6040 #define FP_CB_TUNE (0x3<<22) #define _PCH_FPA1 0xc6044 #define _PCH_FPB0 0xc6048 #define _PCH_FPB1 0xc604c -#define _PCH_FP0(pll) (pll == 0 ? _PCH_FPA0 : _PCH_FPB0) -#define _PCH_FP1(pll) (pll == 0 ? _PCH_FPA1 : _PCH_FPB1) +#define PCH_FP0(pll) (pll == 0 ? _PCH_FPA0 : _PCH_FPB0) +#define PCH_FP1(pll) (pll == 0 ? _PCH_FPA1 : _PCH_FPB1) #define PCH_DPLL_TEST 0xc606c @@ -3782,46 +3978,40 @@ #define PCH_SSC4_AUX_PARMS 0xc6214 #define PCH_DPLL_SEL 0xc7000 -#define TRANSA_DPLL_ENABLE (1<<3) -#define TRANSA_DPLLB_SEL (1<<0) -#define TRANSA_DPLLA_SEL 0 -#define TRANSB_DPLL_ENABLE (1<<7) -#define TRANSB_DPLLB_SEL (1<<4) -#define TRANSB_DPLLA_SEL (0) -#define TRANSC_DPLL_ENABLE (1<<11) -#define TRANSC_DPLLB_SEL (1<<8) -#define TRANSC_DPLLA_SEL (0) +#define TRANS_DPLLB_SEL(pipe) (1 << (pipe * 4)) +#define TRANS_DPLLA_SEL(pipe) 0 +#define TRANS_DPLL_ENABLE(pipe) (1 << (pipe * 4 + 3)) /* transcoder */ -#define _TRANS_HTOTAL_A 0xe0000 -#define TRANS_HTOTAL_SHIFT 16 -#define TRANS_HACTIVE_SHIFT 0 -#define _TRANS_HBLANK_A 0xe0004 -#define TRANS_HBLANK_END_SHIFT 16 -#define TRANS_HBLANK_START_SHIFT 0 -#define _TRANS_HSYNC_A 0xe0008 -#define TRANS_HSYNC_END_SHIFT 16 -#define TRANS_HSYNC_START_SHIFT 0 -#define _TRANS_VTOTAL_A 0xe000c -#define TRANS_VTOTAL_SHIFT 16 -#define TRANS_VACTIVE_SHIFT 0 -#define _TRANS_VBLANK_A 0xe0010 -#define TRANS_VBLANK_END_SHIFT 16 -#define TRANS_VBLANK_START_SHIFT 0 -#define _TRANS_VSYNC_A 0xe0014 -#define TRANS_VSYNC_END_SHIFT 16 -#define TRANS_VSYNC_START_SHIFT 0 -#define _TRANS_VSYNCSHIFT_A 0xe0028 - -#define _TRANSA_DATA_M1 0xe0030 -#define _TRANSA_DATA_N1 0xe0034 -#define _TRANSA_DATA_M2 0xe0038 -#define _TRANSA_DATA_N2 0xe003c -#define _TRANSA_DP_LINK_M1 0xe0040 -#define _TRANSA_DP_LINK_N1 0xe0044 -#define _TRANSA_DP_LINK_M2 0xe0048 -#define _TRANSA_DP_LINK_N2 0xe004c +#define _PCH_TRANS_HTOTAL_A 0xe0000 +#define TRANS_HTOTAL_SHIFT 16 +#define TRANS_HACTIVE_SHIFT 0 +#define _PCH_TRANS_HBLANK_A 0xe0004 +#define TRANS_HBLANK_END_SHIFT 16 +#define TRANS_HBLANK_START_SHIFT 0 +#define _PCH_TRANS_HSYNC_A 0xe0008 +#define TRANS_HSYNC_END_SHIFT 16 +#define TRANS_HSYNC_START_SHIFT 0 +#define _PCH_TRANS_VTOTAL_A 0xe000c +#define TRANS_VTOTAL_SHIFT 16 +#define TRANS_VACTIVE_SHIFT 0 +#define _PCH_TRANS_VBLANK_A 0xe0010 +#define TRANS_VBLANK_END_SHIFT 16 +#define TRANS_VBLANK_START_SHIFT 0 +#define _PCH_TRANS_VSYNC_A 0xe0014 +#define TRANS_VSYNC_END_SHIFT 16 +#define TRANS_VSYNC_START_SHIFT 0 +#define _PCH_TRANS_VSYNCSHIFT_A 0xe0028 + +#define _PCH_TRANSA_DATA_M1 0xe0030 +#define _PCH_TRANSA_DATA_N1 0xe0034 +#define _PCH_TRANSA_DATA_M2 0xe0038 +#define _PCH_TRANSA_DATA_N2 0xe003c +#define _PCH_TRANSA_LINK_M1 0xe0040 +#define _PCH_TRANSA_LINK_N1 0xe0044 +#define _PCH_TRANSA_LINK_M2 0xe0048 +#define _PCH_TRANSA_LINK_N2 0xe004c /* Per-transcoder DIP controls */ @@ -3890,44 +4080,45 @@ #define HSW_TVIDEO_DIP_VSC_DATA(trans) \ _TRANSCODER(trans, HSW_VIDEO_DIP_VSC_DATA_A, HSW_VIDEO_DIP_VSC_DATA_B) -#define _TRANS_HTOTAL_B 0xe1000 -#define _TRANS_HBLANK_B 0xe1004 -#define _TRANS_HSYNC_B 0xe1008 -#define _TRANS_VTOTAL_B 0xe100c -#define _TRANS_VBLANK_B 0xe1010 -#define _TRANS_VSYNC_B 0xe1014 -#define _TRANS_VSYNCSHIFT_B 0xe1028 - -#define TRANS_HTOTAL(pipe) _PIPE(pipe, _TRANS_HTOTAL_A, _TRANS_HTOTAL_B) -#define TRANS_HBLANK(pipe) _PIPE(pipe, _TRANS_HBLANK_A, _TRANS_HBLANK_B) -#define TRANS_HSYNC(pipe) _PIPE(pipe, _TRANS_HSYNC_A, _TRANS_HSYNC_B) -#define TRANS_VTOTAL(pipe) _PIPE(pipe, _TRANS_VTOTAL_A, _TRANS_VTOTAL_B) -#define TRANS_VBLANK(pipe) _PIPE(pipe, _TRANS_VBLANK_A, _TRANS_VBLANK_B) -#define TRANS_VSYNC(pipe) _PIPE(pipe, _TRANS_VSYNC_A, _TRANS_VSYNC_B) -#define TRANS_VSYNCSHIFT(pipe) _PIPE(pipe, _TRANS_VSYNCSHIFT_A, \ - _TRANS_VSYNCSHIFT_B) - -#define _TRANSB_DATA_M1 0xe1030 -#define _TRANSB_DATA_N1 0xe1034 -#define _TRANSB_DATA_M2 0xe1038 -#define _TRANSB_DATA_N2 0xe103c -#define _TRANSB_DP_LINK_M1 0xe1040 -#define _TRANSB_DP_LINK_N1 0xe1044 -#define _TRANSB_DP_LINK_M2 0xe1048 -#define _TRANSB_DP_LINK_N2 0xe104c - -#define TRANSDATA_M1(pipe) _PIPE(pipe, _TRANSA_DATA_M1, _TRANSB_DATA_M1) -#define TRANSDATA_N1(pipe) _PIPE(pipe, _TRANSA_DATA_N1, _TRANSB_DATA_N1) -#define TRANSDATA_M2(pipe) _PIPE(pipe, _TRANSA_DATA_M2, _TRANSB_DATA_M2) -#define TRANSDATA_N2(pipe) _PIPE(pipe, _TRANSA_DATA_N2, _TRANSB_DATA_N2) -#define TRANSDPLINK_M1(pipe) _PIPE(pipe, _TRANSA_DP_LINK_M1, _TRANSB_DP_LINK_M1) -#define TRANSDPLINK_N1(pipe) _PIPE(pipe, _TRANSA_DP_LINK_N1, _TRANSB_DP_LINK_N1) -#define TRANSDPLINK_M2(pipe) _PIPE(pipe, _TRANSA_DP_LINK_M2, _TRANSB_DP_LINK_M2) -#define TRANSDPLINK_N2(pipe) _PIPE(pipe, _TRANSA_DP_LINK_N2, _TRANSB_DP_LINK_N2) - -#define _TRANSACONF 0xf0008 -#define _TRANSBCONF 0xf1008 -#define TRANSCONF(plane) _PIPE(plane, _TRANSACONF, _TRANSBCONF) +#define _PCH_TRANS_HTOTAL_B 0xe1000 +#define _PCH_TRANS_HBLANK_B 0xe1004 +#define _PCH_TRANS_HSYNC_B 0xe1008 +#define _PCH_TRANS_VTOTAL_B 0xe100c +#define _PCH_TRANS_VBLANK_B 0xe1010 +#define _PCH_TRANS_VSYNC_B 0xe1014 +#define _PCH_TRANS_VSYNCSHIFT_B 0xe1028 + +#define PCH_TRANS_HTOTAL(pipe) _PIPE(pipe, _PCH_TRANS_HTOTAL_A, _PCH_TRANS_HTOTAL_B) +#define PCH_TRANS_HBLANK(pipe) _PIPE(pipe, _PCH_TRANS_HBLANK_A, _PCH_TRANS_HBLANK_B) +#define PCH_TRANS_HSYNC(pipe) _PIPE(pipe, _PCH_TRANS_HSYNC_A, _PCH_TRANS_HSYNC_B) +#define PCH_TRANS_VTOTAL(pipe) _PIPE(pipe, _PCH_TRANS_VTOTAL_A, _PCH_TRANS_VTOTAL_B) +#define PCH_TRANS_VBLANK(pipe) _PIPE(pipe, _PCH_TRANS_VBLANK_A, _PCH_TRANS_VBLANK_B) +#define PCH_TRANS_VSYNC(pipe) _PIPE(pipe, _PCH_TRANS_VSYNC_A, _PCH_TRANS_VSYNC_B) +#define PCH_TRANS_VSYNCSHIFT(pipe) _PIPE(pipe, _PCH_TRANS_VSYNCSHIFT_A, \ + _PCH_TRANS_VSYNCSHIFT_B) + +#define _PCH_TRANSB_DATA_M1 0xe1030 +#define _PCH_TRANSB_DATA_N1 0xe1034 +#define _PCH_TRANSB_DATA_M2 0xe1038 +#define _PCH_TRANSB_DATA_N2 0xe103c +#define _PCH_TRANSB_LINK_M1 0xe1040 +#define _PCH_TRANSB_LINK_N1 0xe1044 +#define _PCH_TRANSB_LINK_M2 0xe1048 +#define _PCH_TRANSB_LINK_N2 0xe104c + +#define PCH_TRANS_DATA_M1(pipe) _PIPE(pipe, _PCH_TRANSA_DATA_M1, _PCH_TRANSB_DATA_M1) +#define PCH_TRANS_DATA_N1(pipe) _PIPE(pipe, _PCH_TRANSA_DATA_N1, _PCH_TRANSB_DATA_N1) +#define PCH_TRANS_DATA_M2(pipe) _PIPE(pipe, _PCH_TRANSA_DATA_M2, _PCH_TRANSB_DATA_M2) +#define PCH_TRANS_DATA_N2(pipe) _PIPE(pipe, _PCH_TRANSA_DATA_N2, _PCH_TRANSB_DATA_N2) +#define PCH_TRANS_LINK_M1(pipe) _PIPE(pipe, _PCH_TRANSA_LINK_M1, _PCH_TRANSB_LINK_M1) +#define PCH_TRANS_LINK_N1(pipe) _PIPE(pipe, _PCH_TRANSA_LINK_N1, _PCH_TRANSB_LINK_N1) +#define PCH_TRANS_LINK_M2(pipe) _PIPE(pipe, _PCH_TRANSA_LINK_M2, _PCH_TRANSB_LINK_M2) +#define PCH_TRANS_LINK_N2(pipe) _PIPE(pipe, _PCH_TRANSA_LINK_N2, _PCH_TRANSB_LINK_N2) + +#define _PCH_TRANSACONF 0xf0008 +#define _PCH_TRANSBCONF 0xf1008 +#define PCH_TRANSCONF(pipe) _PIPE(pipe, _PCH_TRANSACONF, _PCH_TRANSBCONF) +#define LPT_TRANSCONF _PCH_TRANSACONF /* lpt has only one transcoder */ #define TRANS_DISABLE (0<<31) #define TRANS_ENABLE (1<<31) #define TRANS_STATE_MASK (1<<30) @@ -4011,10 +4202,9 @@ #define FDI_LINK_TRAIN_600MV_3_5DB_SNB_B (0x39<<22) #define FDI_LINK_TRAIN_800MV_0DB_SNB_B (0x38<<22) #define FDI_LINK_TRAIN_VOL_EMP_MASK (0x3f<<22) -#define FDI_DP_PORT_WIDTH_X1 (0<<19) -#define FDI_DP_PORT_WIDTH_X2 (1<<19) -#define FDI_DP_PORT_WIDTH_X3 (2<<19) -#define FDI_DP_PORT_WIDTH_X4 (3<<19) +#define FDI_DP_PORT_WIDTH_SHIFT 19 +#define FDI_DP_PORT_WIDTH_MASK (7 << FDI_DP_PORT_WIDTH_SHIFT) +#define FDI_DP_PORT_WIDTH(width) (((width) - 1) << FDI_DP_PORT_WIDTH_SHIFT) #define FDI_TX_ENHANCE_FRAME_ENABLE (1<<18) /* Ironlake: hardwired to 1 */ #define FDI_TX_PLL_ENABLE (1<<14) @@ -4039,7 +4229,6 @@ /* train, dp width same as FDI_TX */ #define FDI_FS_ERRC_ENABLE (1<<27) #define FDI_FE_ERRC_ENABLE (1<<26) -#define FDI_DP_PORT_WIDTH_X8 (7<<19) #define FDI_RX_POLARITY_REVERSED_LPT (1<<16) #define FDI_8BPC (0<<16) #define FDI_10BPC (1<<16) @@ -4061,9 +4250,6 @@ #define FDI_LINK_TRAIN_PATTERN_IDLE_CPT (2<<8) #define FDI_LINK_TRAIN_NORMAL_CPT (3<<8) #define FDI_LINK_TRAIN_PATTERN_MASK_CPT (3<<8) -/* LPT */ -#define FDI_PORT_WIDTH_2X_LPT (1<<19) -#define FDI_PORT_WIDTH_1X_LPT (0<<19) #define _FDI_RXA_MISC 0xf0010 #define _FDI_RXB_MISC 0xf1010 @@ -4309,6 +4495,7 @@ #define GEN6_RC_CTL_RC6_ENABLE (1<<18) #define GEN6_RC_CTL_RC1e_ENABLE (1<<20) #define GEN6_RC_CTL_RC7_ENABLE (1<<22) +#define GEN7_RC_CTL_TO_MODE (1<<28) #define GEN6_RC_CTL_EI_MODE(x) ((x)<<27) #define GEN6_RC_CTL_HW_ENABLE (1<<31) #define GEN6_RP_DOWN_TIMEOUT 0xA010 @@ -4370,7 +4557,7 @@ #define GEN6_PM_RP_DOWN_THRESHOLD (1<<4) #define GEN6_PM_RP_UP_EI_EXPIRED (1<<2) #define GEN6_PM_RP_DOWN_EI_EXPIRED (1<<1) -#define GEN6_PM_DEFERRED_EVENTS (GEN6_PM_RP_UP_THRESHOLD | \ +#define GEN6_PM_RPS_EVENTS (GEN6_PM_RP_UP_THRESHOLD | \ GEN6_PM_RP_DOWN_THRESHOLD | \ GEN6_PM_RP_DOWN_TIMEOUT) @@ -4392,20 +4579,6 @@ #define GEN6_PCODE_FREQ_IA_RATIO_SHIFT 8 #define GEN6_PCODE_FREQ_RING_RATIO_SHIFT 16 -#define VLV_IOSF_DOORBELL_REQ 0x182100 -#define IOSF_DEVFN_SHIFT 24 -#define IOSF_OPCODE_SHIFT 16 -#define IOSF_PORT_SHIFT 8 -#define IOSF_BYTE_ENABLES_SHIFT 4 -#define IOSF_BAR_SHIFT 1 -#define IOSF_SB_BUSY (1<<0) -#define IOSF_PORT_PUNIT 0x4 -#define VLV_IOSF_DATA 0x182104 -#define VLV_IOSF_ADDR 0x182108 - -#define PUNIT_OPCODE_REG_READ 6 -#define PUNIT_OPCODE_REG_WRITE 7 - #define GEN6_GT_CORE_STATUS 0x138060 #define GEN6_CORE_CPD_STATE_MASK (7<<4) #define GEN6_RCn_MASK 7 @@ -4602,9 +4775,6 @@ #define TRANS_DDI_EDP_INPUT_B_ONOFF (5<<12) #define TRANS_DDI_EDP_INPUT_C_ONOFF (6<<12) #define TRANS_DDI_BFI_ENABLE (1<<4) -#define TRANS_DDI_PORT_WIDTH_X1 (0<<1) -#define TRANS_DDI_PORT_WIDTH_X2 (1<<1) -#define TRANS_DDI_PORT_WIDTH_X4 (3<<1) /* DisplayPort Transport Control */ #define DP_TP_CTL_A 0x64040 @@ -4648,9 +4818,7 @@ #define DDI_BUF_PORT_REVERSAL (1<<16) #define DDI_BUF_IS_IDLE (1<<7) #define DDI_A_4_LANES (1<<4) -#define DDI_PORT_WIDTH_X1 (0<<1) -#define DDI_PORT_WIDTH_X2 (1<<1) -#define DDI_PORT_WIDTH_X4 (3<<1) +#define DDI_PORT_WIDTH(width) (((width) - 1) << 1) #define DDI_INIT_DISPLAY_DETECTED (1<<0) /* DDI Buffer Translations */ @@ -4774,6 +4942,9 @@ #define SFUSE_STRAP_DDIC_DETECTED (1<<1) #define SFUSE_STRAP_DDID_DETECTED (1<<0) +#define WM_MISC 0x45260 +#define WM_MISC_DATA_PARTITION_5_6 (1 << 0) + #define WM_DBG 0x45280 #define WM_DBG_DISALLOW_MULTIPLE_LP (1<<0) #define WM_DBG_DISALLOW_MAXFIFO (1<<1) @@ -4787,6 +4958,9 @@ #define _PIPE_A_CSC_COEFF_RV_GV 0x49020 #define _PIPE_A_CSC_COEFF_BV 0x49024 #define _PIPE_A_CSC_MODE 0x49028 +#define CSC_BLACK_SCREEN_OFFSET (1 << 2) +#define CSC_POSITION_BEFORE_GAMMA (1 << 1) +#define CSC_MODE_YUV_TO_RGB (1 << 0) #define _PIPE_A_CSC_PREOFF_HI 0x49030 #define _PIPE_A_CSC_PREOFF_ME 0x49034 #define _PIPE_A_CSC_PREOFF_LO 0x49038 @@ -4808,10 +4982,6 @@ #define _PIPE_B_CSC_POSTOFF_ME 0x49144 #define _PIPE_B_CSC_POSTOFF_LO 0x49148 -#define CSC_BLACK_SCREEN_OFFSET (1 << 2) -#define CSC_POSITION_BEFORE_GAMMA (1 << 1) -#define CSC_MODE_YUV_TO_RGB (1 << 0) - #define PIPE_CSC_COEFF_RY_GY(pipe) _PIPE(pipe, _PIPE_A_CSC_COEFF_RY_GY, _PIPE_B_CSC_COEFF_RY_GY) #define PIPE_CSC_COEFF_BY(pipe) _PIPE(pipe, _PIPE_A_CSC_COEFF_BY, _PIPE_B_CSC_COEFF_BY) #define PIPE_CSC_COEFF_RU_GU(pipe) _PIPE(pipe, _PIPE_A_CSC_COEFF_RU_GU, _PIPE_B_CSC_COEFF_RU_GU) |