diff options
Diffstat (limited to 'drivers/gpu/drm/i915/display/vlv_dsi.c')
| -rw-r--r-- | drivers/gpu/drm/i915/display/vlv_dsi.c | 1996 |
1 files changed, 1996 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c new file mode 100644 index 000000000000..e272d826210a --- /dev/null +++ b/drivers/gpu/drm/i915/display/vlv_dsi.c @@ -0,0 +1,1996 @@ +/* + * Copyright © 2013 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Author: Jani Nikula <jani.nikula@intel.com> + */ + +#include <linux/gpio/consumer.h> +#include <linux/slab.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_crtc.h> +#include <drm/drm_edid.h> +#include <drm/drm_mipi_dsi.h> + +#include "i915_drv.h" +#include "intel_atomic.h" +#include "intel_connector.h" +#include "intel_drv.h" +#include "intel_dsi.h" +#include "intel_fifo_underrun.h" +#include "intel_panel.h" +#include "intel_sideband.h" + +/* return pixels in terms of txbyteclkhs */ +static u16 txbyteclkhs(u16 pixels, int bpp, int lane_count, + u16 burst_mode_ratio) +{ + return DIV_ROUND_UP(DIV_ROUND_UP(pixels * bpp * burst_mode_ratio, + 8 * 100), lane_count); +} + +/* return pixels equvalent to txbyteclkhs */ +static u16 pixels_from_txbyteclkhs(u16 clk_hs, int bpp, int lane_count, + u16 burst_mode_ratio) +{ + return DIV_ROUND_UP((clk_hs * lane_count * 8 * 100), + (bpp * burst_mode_ratio)); +} + +enum mipi_dsi_pixel_format pixel_format_from_register_bits(u32 fmt) +{ + /* It just so happens the VBT matches register contents. */ + switch (fmt) { + case VID_MODE_FORMAT_RGB888: + return MIPI_DSI_FMT_RGB888; + case VID_MODE_FORMAT_RGB666: + return MIPI_DSI_FMT_RGB666; + case VID_MODE_FORMAT_RGB666_PACKED: + return MIPI_DSI_FMT_RGB666_PACKED; + case VID_MODE_FORMAT_RGB565: + return MIPI_DSI_FMT_RGB565; + default: + MISSING_CASE(fmt); + return MIPI_DSI_FMT_RGB666; + } +} + +void vlv_dsi_wait_for_fifo_empty(struct intel_dsi *intel_dsi, enum port port) +{ + struct drm_encoder *encoder = &intel_dsi->base.base; + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = to_i915(dev); + u32 mask; + + mask = LP_CTRL_FIFO_EMPTY | HS_CTRL_FIFO_EMPTY | + LP_DATA_FIFO_EMPTY | HS_DATA_FIFO_EMPTY; + + if (intel_wait_for_register(&dev_priv->uncore, + MIPI_GEN_FIFO_STAT(port), mask, mask, + 100)) + DRM_ERROR("DPI FIFOs are not empty\n"); +} + +static void write_data(struct drm_i915_private *dev_priv, + i915_reg_t reg, + const u8 *data, u32 len) +{ + u32 i, j; + + for (i = 0; i < len; i += 4) { + u32 val = 0; + + for (j = 0; j < min_t(u32, len - i, 4); j++) + val |= *data++ << 8 * j; + + I915_WRITE(reg, val); + } +} + +static void read_data(struct drm_i915_private *dev_priv, + i915_reg_t reg, + u8 *data, u32 len) +{ + u32 i, j; + + for (i = 0; i < len; i += 4) { + u32 val = I915_READ(reg); + + for (j = 0; j < min_t(u32, len - i, 4); j++) + *data++ = val >> 8 * j; + } +} + +static ssize_t intel_dsi_host_transfer(struct mipi_dsi_host *host, + const struct mipi_dsi_msg *msg) +{ + struct intel_dsi_host *intel_dsi_host = to_intel_dsi_host(host); + struct drm_device *dev = intel_dsi_host->intel_dsi->base.base.dev; + struct drm_i915_private *dev_priv = to_i915(dev); + enum port port = intel_dsi_host->port; + struct mipi_dsi_packet packet; + ssize_t ret; + const u8 *header, *data; + i915_reg_t data_reg, ctrl_reg; + u32 data_mask, ctrl_mask; + + ret = mipi_dsi_create_packet(&packet, msg); + if (ret < 0) + return ret; + + header = packet.header; + data = packet.payload; + + if (msg->flags & MIPI_DSI_MSG_USE_LPM) { + data_reg = MIPI_LP_GEN_DATA(port); + data_mask = LP_DATA_FIFO_FULL; + ctrl_reg = MIPI_LP_GEN_CTRL(port); + ctrl_mask = LP_CTRL_FIFO_FULL; + } else { + data_reg = MIPI_HS_GEN_DATA(port); + data_mask = HS_DATA_FIFO_FULL; + ctrl_reg = MIPI_HS_GEN_CTRL(port); + ctrl_mask = HS_CTRL_FIFO_FULL; + } + + /* note: this is never true for reads */ + if (packet.payload_length) { + if (intel_wait_for_register(&dev_priv->uncore, + MIPI_GEN_FIFO_STAT(port), + data_mask, 0, + 50)) + DRM_ERROR("Timeout waiting for HS/LP DATA FIFO !full\n"); + + write_data(dev_priv, data_reg, packet.payload, + packet.payload_length); + } + + if (msg->rx_len) { + I915_WRITE(MIPI_INTR_STAT(port), GEN_READ_DATA_AVAIL); + } + + if (intel_wait_for_register(&dev_priv->uncore, + MIPI_GEN_FIFO_STAT(port), + ctrl_mask, 0, + 50)) { + DRM_ERROR("Timeout waiting for HS/LP CTRL FIFO !full\n"); + } + + I915_WRITE(ctrl_reg, header[2] << 16 | header[1] << 8 | header[0]); + + /* ->rx_len is set only for reads */ + if (msg->rx_len) { + data_mask = GEN_READ_DATA_AVAIL; + if (intel_wait_for_register(&dev_priv->uncore, + MIPI_INTR_STAT(port), + data_mask, data_mask, + 50)) + DRM_ERROR("Timeout waiting for read data.\n"); + + read_data(dev_priv, data_reg, msg->rx_buf, msg->rx_len); + } + + /* XXX: fix for reads and writes */ + return 4 + packet.payload_length; +} + +static int intel_dsi_host_attach(struct mipi_dsi_host *host, + struct mipi_dsi_device *dsi) +{ + return 0; +} + +static int intel_dsi_host_detach(struct mipi_dsi_host *host, + struct mipi_dsi_device *dsi) +{ + return 0; +} + +static const struct mipi_dsi_host_ops intel_dsi_host_ops = { + .attach = intel_dsi_host_attach, + .detach = intel_dsi_host_detach, + .transfer = intel_dsi_host_transfer, +}; + +/* + * send a video mode command + * + * XXX: commands with data in MIPI_DPI_DATA? + */ +static int dpi_send_cmd(struct intel_dsi *intel_dsi, u32 cmd, bool hs, + enum port port) +{ + struct drm_encoder *encoder = &intel_dsi->base.base; + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = to_i915(dev); + u32 mask; + + /* XXX: pipe, hs */ + if (hs) + cmd &= ~DPI_LP_MODE; + else + cmd |= DPI_LP_MODE; + + /* clear bit */ + I915_WRITE(MIPI_INTR_STAT(port), SPL_PKT_SENT_INTERRUPT); + + /* XXX: old code skips write if control unchanged */ + if (cmd == I915_READ(MIPI_DPI_CONTROL(port))) + DRM_DEBUG_KMS("Same special packet %02x twice in a row.\n", cmd); + + I915_WRITE(MIPI_DPI_CONTROL(port), cmd); + + mask = SPL_PKT_SENT_INTERRUPT; + if (intel_wait_for_register(&dev_priv->uncore, + MIPI_INTR_STAT(port), mask, mask, + 100)) + DRM_ERROR("Video mode command 0x%08x send failed.\n", cmd); + + return 0; +} + +static void band_gap_reset(struct drm_i915_private *dev_priv) +{ + vlv_flisdsi_get(dev_priv); + + vlv_flisdsi_write(dev_priv, 0x08, 0x0001); + vlv_flisdsi_write(dev_priv, 0x0F, 0x0005); + vlv_flisdsi_write(dev_priv, 0x0F, 0x0025); + udelay(150); + vlv_flisdsi_write(dev_priv, 0x0F, 0x0000); + vlv_flisdsi_write(dev_priv, 0x08, 0x0000); + + vlv_flisdsi_put(dev_priv); +} + +static int intel_dsi_compute_config(struct intel_encoder *encoder, + struct intel_crtc_state *pipe_config, + struct drm_connector_state *conn_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dsi *intel_dsi = container_of(encoder, struct intel_dsi, + base); + struct intel_connector *intel_connector = intel_dsi->attached_connector; + struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc); + const struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode; + struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode; + int ret; + + DRM_DEBUG_KMS("\n"); + pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB; + + if (fixed_mode) { + intel_fixed_panel_mode(fixed_mode, adjusted_mode); + + if (HAS_GMCH(dev_priv)) + intel_gmch_panel_fitting(crtc, pipe_config, + conn_state->scaling_mode); + else + intel_pch_panel_fitting(crtc, pipe_config, + conn_state->scaling_mode); + } + + if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) + return -EINVAL; + + /* DSI uses short packets for sync events, so clear mode flags for DSI */ + adjusted_mode->flags = 0; + + if (intel_dsi->pixel_format == MIPI_DSI_FMT_RGB888) + pipe_config->pipe_bpp = 24; + else + pipe_config->pipe_bpp = 18; + + if (IS_GEN9_LP(dev_priv)) { + /* Enable Frame time stamp based scanline reporting */ + adjusted_mode->private_flags |= + I915_MODE_FLAG_GET_SCANLINE_FROM_TIMESTAMP; + + /* Dual link goes to DSI transcoder A. */ + if (intel_dsi->ports == BIT(PORT_C)) + pipe_config->cpu_transcoder = TRANSCODER_DSI_C; + else + pipe_config->cpu_transcoder = TRANSCODER_DSI_A; + + ret = bxt_dsi_pll_compute(encoder, pipe_config); + if (ret) + return -EINVAL; + } else { + ret = vlv_dsi_pll_compute(encoder, pipe_config); + if (ret) + return -EINVAL; + } + + pipe_config->clock_set = true; + + return 0; +} + +static bool glk_dsi_enable_io(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + enum port port; + u32 tmp; + bool cold_boot = false; + + /* Set the MIPI mode + * If MIPI_Mode is off, then writing to LP_Wake bit is not reflecting. + * Power ON MIPI IO first and then write into IO reset and LP wake bits + */ + for_each_dsi_port(port, intel_dsi->ports) { + tmp = I915_READ(MIPI_CTRL(port)); + I915_WRITE(MIPI_CTRL(port), tmp | GLK_MIPIIO_ENABLE); + } + + /* Put the IO into reset */ + tmp = I915_READ(MIPI_CTRL(PORT_A)); + tmp &= ~GLK_MIPIIO_RESET_RELEASED; + I915_WRITE(MIPI_CTRL(PORT_A), tmp); + + /* Program LP Wake */ + for_each_dsi_port(port, intel_dsi->ports) { + tmp = I915_READ(MIPI_CTRL(port)); + if (!(I915_READ(MIPI_DEVICE_READY(port)) & DEVICE_READY)) + tmp &= ~GLK_LP_WAKE; + else + tmp |= GLK_LP_WAKE; + I915_WRITE(MIPI_CTRL(port), tmp); + } + + /* Wait for Pwr ACK */ + for_each_dsi_port(port, intel_dsi->ports) { + if (intel_wait_for_register(&dev_priv->uncore, + MIPI_CTRL(port), + GLK_MIPIIO_PORT_POWERED, + GLK_MIPIIO_PORT_POWERED, + 20)) + DRM_ERROR("MIPIO port is powergated\n"); + } + + /* Check for cold boot scenario */ + for_each_dsi_port(port, intel_dsi->ports) { + cold_boot |= + !(I915_READ(MIPI_DEVICE_READY(port)) & DEVICE_READY); + } + + return cold_boot; +} + +static void glk_dsi_device_ready(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + enum port port; + u32 val; + + /* Wait for MIPI PHY status bit to set */ + for_each_dsi_port(port, intel_dsi->ports) { + if (intel_wait_for_register(&dev_priv->uncore, + MIPI_CTRL(port), + GLK_PHY_STATUS_PORT_READY, + GLK_PHY_STATUS_PORT_READY, + 20)) + DRM_ERROR("PHY is not ON\n"); + } + + /* Get IO out of reset */ + val = I915_READ(MIPI_CTRL(PORT_A)); + I915_WRITE(MIPI_CTRL(PORT_A), val | GLK_MIPIIO_RESET_RELEASED); + + /* Get IO out of Low power state*/ + for_each_dsi_port(port, intel_dsi->ports) { + if (!(I915_READ(MIPI_DEVICE_READY(port)) & DEVICE_READY)) { + val = I915_READ(MIPI_DEVICE_READY(port)); + val &= ~ULPS_STATE_MASK; + val |= DEVICE_READY; + I915_WRITE(MIPI_DEVICE_READY(port), val); + usleep_range(10, 15); + } else { + /* Enter ULPS */ + val = I915_READ(MIPI_DEVICE_READY(port)); + val &= ~ULPS_STATE_MASK; + val |= (ULPS_STATE_ENTER | DEVICE_READY); + I915_WRITE(MIPI_DEVICE_READY(port), val); + + /* Wait for ULPS active */ + if (intel_wait_for_register(&dev_priv->uncore, + MIPI_CTRL(port), + GLK_ULPS_NOT_ACTIVE, + 0, + 20)) + DRM_ERROR("ULPS not active\n"); + + /* Exit ULPS */ + val = I915_READ(MIPI_DEVICE_READY(port)); + val &= ~ULPS_STATE_MASK; + val |= (ULPS_STATE_EXIT | DEVICE_READY); + I915_WRITE(MIPI_DEVICE_READY(port), val); + + /* Enter Normal Mode */ + val = I915_READ(MIPI_DEVICE_READY(port)); + val &= ~ULPS_STATE_MASK; + val |= (ULPS_STATE_NORMAL_OPERATION | DEVICE_READY); + I915_WRITE(MIPI_DEVICE_READY(port), val); + + val = I915_READ(MIPI_CTRL(port)); + val &= ~GLK_LP_WAKE; + I915_WRITE(MIPI_CTRL(port), val); + } + } + + /* Wait for Stop state */ + for_each_dsi_port(port, intel_dsi->ports) { + if (intel_wait_for_register(&dev_priv->uncore, + MIPI_CTRL(port), + GLK_DATA_LANE_STOP_STATE, + GLK_DATA_LANE_STOP_STATE, + 20)) + DRM_ERROR("Date lane not in STOP state\n"); + } + + /* Wait for AFE LATCH */ + for_each_dsi_port(port, intel_dsi->ports) { + if (intel_wait_for_register(&dev_priv->uncore, + BXT_MIPI_PORT_CTRL(port), + AFE_LATCHOUT, + AFE_LATCHOUT, + 20)) + DRM_ERROR("D-PHY not entering LP-11 state\n"); + } +} + +static void bxt_dsi_device_ready(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + enum port port; + u32 val; + + DRM_DEBUG_KMS("\n"); + + /* Enable MIPI PHY transparent latch */ + for_each_dsi_port(port, intel_dsi->ports) { + val = I915_READ(BXT_MIPI_PORT_CTRL(port)); + I915_WRITE(BXT_MIPI_PORT_CTRL(port), val | LP_OUTPUT_HOLD); + usleep_range(2000, 2500); + } + + /* Clear ULPS and set device ready */ + for_each_dsi_port(port, intel_dsi->ports) { + val = I915_READ(MIPI_DEVICE_READY(port)); + val &= ~ULPS_STATE_MASK; + I915_WRITE(MIPI_DEVICE_READY(port), val); + usleep_range(2000, 2500); + val |= DEVICE_READY; + I915_WRITE(MIPI_DEVICE_READY(port), val); + } +} + +static void vlv_dsi_device_ready(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + enum port port; + u32 val; + + DRM_DEBUG_KMS("\n"); + + vlv_flisdsi_get(dev_priv); + /* program rcomp for compliance, reduce from 50 ohms to 45 ohms + * needed everytime after power gate */ + vlv_flisdsi_write(dev_priv, 0x04, 0x0004); + vlv_flisdsi_put(dev_priv); + + /* bandgap reset is needed after everytime we do power gate */ + band_gap_reset(dev_priv); + + for_each_dsi_port(port, intel_dsi->ports) { + + I915_WRITE(MIPI_DEVICE_READY(port), ULPS_STATE_ENTER); + usleep_range(2500, 3000); + + /* Enable MIPI PHY transparent latch + * Common bit for both MIPI Port A & MIPI Port C + * No similar bit in MIPI Port C reg + */ + val = I915_READ(MIPI_PORT_CTRL(PORT_A)); + I915_WRITE(MIPI_PORT_CTRL(PORT_A), val | LP_OUTPUT_HOLD); + usleep_range(1000, 1500); + + I915_WRITE(MIPI_DEVICE_READY(port), ULPS_STATE_EXIT); + usleep_range(2500, 3000); + + I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY); + usleep_range(2500, 3000); + } +} + +static void intel_dsi_device_ready(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + + if (IS_GEMINILAKE(dev_priv)) + glk_dsi_device_ready(encoder); + else if (IS_GEN9_LP(dev_priv)) + bxt_dsi_device_ready(encoder); + else + vlv_dsi_device_ready(encoder); +} + +static void glk_dsi_enter_low_power_mode(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + enum port port; + u32 val; + + /* Enter ULPS */ + for_each_dsi_port(port, intel_dsi->ports) { + val = I915_READ(MIPI_DEVICE_READY(port)); + val &= ~ULPS_STATE_MASK; + val |= (ULPS_STATE_ENTER | DEVICE_READY); + I915_WRITE(MIPI_DEVICE_READY(port), val); + } + + /* Wait for MIPI PHY status bit to unset */ + for_each_dsi_port(port, intel_dsi->ports) { + if (intel_wait_for_register(&dev_priv->uncore, + MIPI_CTRL(port), + GLK_PHY_STATUS_PORT_READY, 0, 20)) + DRM_ERROR("PHY is not turning OFF\n"); + } + + /* Wait for Pwr ACK bit to unset */ + for_each_dsi_port(port, intel_dsi->ports) { + if (intel_wait_for_register(&dev_priv->uncore, + MIPI_CTRL(port), + GLK_MIPIIO_PORT_POWERED, 0, 20)) + DRM_ERROR("MIPI IO Port is not powergated\n"); + } +} + +static void glk_dsi_disable_mipi_io(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + enum port port; + u32 tmp; + + /* Put the IO into reset */ + tmp = I915_READ(MIPI_CTRL(PORT_A)); + tmp &= ~GLK_MIPIIO_RESET_RELEASED; + I915_WRITE(MIPI_CTRL(PORT_A), tmp); + + /* Wait for MIPI PHY status bit to unset */ + for_each_dsi_port(port, intel_dsi->ports) { + if (intel_wait_for_register(&dev_priv->uncore, + MIPI_CTRL(port), + GLK_PHY_STATUS_PORT_READY, 0, 20)) + DRM_ERROR("PHY is not turning OFF\n"); + } + + /* Clear MIPI mode */ + for_each_dsi_port(port, intel_dsi->ports) { + tmp = I915_READ(MIPI_CTRL(port)); + tmp &= ~GLK_MIPIIO_ENABLE; + I915_WRITE(MIPI_CTRL(port), tmp); + } +} + +static void glk_dsi_clear_device_ready(struct intel_encoder *encoder) +{ + glk_dsi_enter_low_power_mode(encoder); + glk_dsi_disable_mipi_io(encoder); +} + +static void vlv_dsi_clear_device_ready(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + enum port port; + + DRM_DEBUG_KMS("\n"); + for_each_dsi_port(port, intel_dsi->ports) { + /* Common bit for both MIPI Port A & MIPI Port C on VLV/CHV */ + i915_reg_t port_ctrl = IS_GEN9_LP(dev_priv) ? + BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(PORT_A); + u32 val; + + I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY | + ULPS_STATE_ENTER); + usleep_range(2000, 2500); + + I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY | + ULPS_STATE_EXIT); + usleep_range(2000, 2500); + + I915_WRITE(MIPI_DEVICE_READY(port), DEVICE_READY | + ULPS_STATE_ENTER); + usleep_range(2000, 2500); + + /* + * On VLV/CHV, wait till Clock lanes are in LP-00 state for MIPI + * Port A only. MIPI Port C has no similar bit for checking. + */ + if ((IS_GEN9_LP(dev_priv) || port == PORT_A) && + intel_wait_for_register(&dev_priv->uncore, + port_ctrl, AFE_LATCHOUT, 0, + 30)) + DRM_ERROR("DSI LP not going Low\n"); + + /* Disable MIPI PHY transparent latch */ + val = I915_READ(port_ctrl); + I915_WRITE(port_ctrl, val & ~LP_OUTPUT_HOLD); + usleep_range(1000, 1500); + + I915_WRITE(MIPI_DEVICE_READY(port), 0x00); + usleep_range(2000, 2500); + } +} + +static void intel_dsi_port_enable(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + enum port port; + + if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) { + u32 temp; + if (IS_GEN9_LP(dev_priv)) { + for_each_dsi_port(port, intel_dsi->ports) { + temp = I915_READ(MIPI_CTRL(port)); + temp &= ~BXT_PIXEL_OVERLAP_CNT_MASK | + intel_dsi->pixel_overlap << + BXT_PIXEL_OVERLAP_CNT_SHIFT; + I915_WRITE(MIPI_CTRL(port), temp); + } + } else { + temp = I915_READ(VLV_CHICKEN_3); + temp &= ~PIXEL_OVERLAP_CNT_MASK | + intel_dsi->pixel_overlap << + PIXEL_OVERLAP_CNT_SHIFT; + I915_WRITE(VLV_CHICKEN_3, temp); + } + } + + for_each_dsi_port(port, intel_dsi->ports) { + i915_reg_t port_ctrl = IS_GEN9_LP(dev_priv) ? + BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(port); + u32 temp; + + temp = I915_READ(port_ctrl); + + temp &= ~LANE_CONFIGURATION_MASK; + temp &= ~DUAL_LINK_MODE_MASK; + + if (intel_dsi->ports == (BIT(PORT_A) | BIT(PORT_C))) { + temp |= (intel_dsi->dual_link - 1) + << DUAL_LINK_MODE_SHIFT; + if (IS_BROXTON(dev_priv)) + temp |= LANE_CONFIGURATION_DUAL_LINK_A; + else + temp |= crtc->pipe ? + LANE_CONFIGURATION_DUAL_LINK_B : + LANE_CONFIGURATION_DUAL_LINK_A; + } + + if (intel_dsi->pixel_format != MIPI_DSI_FMT_RGB888) + temp |= DITHERING_ENABLE; + + /* assert ip_tg_enable signal */ + I915_WRITE(port_ctrl, temp | DPI_ENABLE); + POSTING_READ(port_ctrl); + } +} + +static void intel_dsi_port_disable(struct intel_encoder *encoder) +{ + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = to_i915(dev); + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + enum port port; + + for_each_dsi_port(port, intel_dsi->ports) { + i915_reg_t port_ctrl = IS_GEN9_LP(dev_priv) ? + BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(port); + u32 temp; + + /* de-assert ip_tg_enable signal */ + temp = I915_READ(port_ctrl); + I915_WRITE(port_ctrl, temp & ~DPI_ENABLE); + POSTING_READ(port_ctrl); + } +} + +static void intel_dsi_prepare(struct intel_encoder *intel_encoder, + const struct intel_crtc_state *pipe_config); +static void intel_dsi_unprepare(struct intel_encoder *encoder); + +/* + * Panel enable/disable sequences from the VBT spec. + * + * Note the spec has AssertReset / DeassertReset swapped from their + * usual naming. We use the normal names to avoid confusion (so below + * they are swapped compared to the spec). + * + * Steps starting with MIPI refer to VBT sequences, note that for v2 + * VBTs several steps which have a VBT in v2 are expected to be handled + * directly by the driver, by directly driving gpios for example. + * + * v2 video mode seq v3 video mode seq command mode seq + * - power on - MIPIPanelPowerOn - power on + * - wait t1+t2 - wait t1+t2 + * - MIPIDeassertResetPin - MIPIDeassertResetPin - MIPIDeassertResetPin + * - io lines to lp-11 - io lines to lp-11 - io lines to lp-11 + * - MIPISendInitialDcsCmds - MIPISendInitialDcsCmds - MIPISendInitialDcsCmds + * - MIPITearOn + * - MIPIDisplayOn + * - turn on DPI - turn on DPI - set pipe to dsr mode + * - MIPIDisplayOn - MIPIDisplayOn + * - wait t5 - wait t5 + * - backlight on - MIPIBacklightOn - backlight on + * ... ... ... issue mem cmds ... + * - backlight off - MIPIBacklightOff - backlight off + * - wait t6 - wait t6 + * - MIPIDisplayOff + * - turn off DPI - turn off DPI - disable pipe dsr mode + * - MIPITearOff + * - MIPIDisplayOff - MIPIDisplayOff + * - io lines to lp-00 - io lines to lp-00 - io lines to lp-00 + * - MIPIAssertResetPin - MIPIAssertResetPin - MIPIAssertResetPin + * - wait t3 - wait t3 + * - power off - MIPIPanelPowerOff - power off + * - wait t4 - wait t4 + */ + +/* + * DSI port enable has to be done before pipe and plane enable, so we do it in + * the pre_enable hook instead of the enable hook. + */ +static void intel_dsi_pre_enable(struct intel_encoder *encoder, + const struct intel_crtc_state *pipe_config, + const struct drm_connector_state *conn_state) +{ + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + struct drm_crtc *crtc = pipe_config->base.crtc; + struct drm_i915_private *dev_priv = to_i915(crtc->dev); + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + enum port port; + u32 val; + bool glk_cold_boot = false; + + DRM_DEBUG_KMS("\n"); + + intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true); + + /* + * The BIOS may leave the PLL in a wonky state where it doesn't + * lock. It needs to be fully powered down to fix it. + */ + if (IS_GEN9_LP(dev_priv)) { + bxt_dsi_pll_disable(encoder); + bxt_dsi_pll_enable(encoder, pipe_config); + } else { + vlv_dsi_pll_disable(encoder); + vlv_dsi_pll_enable(encoder, pipe_config); + } + + if (IS_BROXTON(dev_priv)) { + /* Add MIPI IO reset programming for modeset */ + val = I915_READ(BXT_P_CR_GT_DISP_PWRON); + I915_WRITE(BXT_P_CR_GT_DISP_PWRON, + val | MIPIO_RST_CTRL); + + /* Power up DSI regulator */ + I915_WRITE(BXT_P_DSI_REGULATOR_CFG, STAP_SELECT); + I915_WRITE(BXT_P_DSI_REGULATOR_TX_CTRL, 0); + } + + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { + u32 val; + + /* Disable DPOunit clock gating, can stall pipe */ + val = I915_READ(DSPCLK_GATE_D); + val |= DPOUNIT_CLOCK_GATE_DISABLE; + I915_WRITE(DSPCLK_GATE_D, val); + } + + if (!IS_GEMINILAKE(dev_priv)) + intel_dsi_prepare(encoder, pipe_config); + + /* Power on, try both CRC pmic gpio and VBT */ + if (intel_dsi->gpio_panel) + gpiod_set_value_cansleep(intel_dsi->gpio_panel, 1); + intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_POWER_ON); + intel_dsi_msleep(intel_dsi, intel_dsi->panel_on_delay); + + /* Deassert reset */ + intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DEASSERT_RESET); + + if (IS_GEMINILAKE(dev_priv)) { + glk_cold_boot = glk_dsi_enable_io(encoder); + + /* Prepare port in cold boot(s3/s4) scenario */ + if (glk_cold_boot) + intel_dsi_prepare(encoder, pipe_config); + } + + /* Put device in ready state (LP-11) */ + intel_dsi_device_ready(encoder); + + /* Prepare port in normal boot scenario */ + if (IS_GEMINILAKE(dev_priv) && !glk_cold_boot) + intel_dsi_prepare(encoder, pipe_config); + + /* Send initialization commands in LP mode */ + intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_INIT_OTP); + + /* Enable port in pre-enable phase itself because as per hw team + * recommendation, port should be enabled befor plane & pipe */ + if (is_cmd_mode(intel_dsi)) { + for_each_dsi_port(port, intel_dsi->ports) + I915_WRITE(MIPI_MAX_RETURN_PKT_SIZE(port), 8 * 4); + intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_TEAR_ON); + intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DISPLAY_ON); + } else { + msleep(20); /* XXX */ + for_each_dsi_port(port, intel_dsi->ports) + dpi_send_cmd(intel_dsi, TURN_ON, false, port); + intel_dsi_msleep(intel_dsi, 100); + + intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DISPLAY_ON); + + intel_dsi_port_enable(encoder, pipe_config); + } + + intel_panel_enable_backlight(pipe_config, conn_state); + intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_BACKLIGHT_ON); +} + +/* + * DSI port disable has to be done after pipe and plane disable, so we do it in + * the post_disable hook. + */ +static void intel_dsi_disable(struct intel_encoder *encoder, + const struct intel_crtc_state *old_crtc_state, + const struct drm_connector_state *old_conn_state) +{ + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + enum port port; + + DRM_DEBUG_KMS("\n"); + + intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_BACKLIGHT_OFF); + intel_panel_disable_backlight(old_conn_state); + + /* + * According to the spec we should send SHUTDOWN before + * MIPI_SEQ_DISPLAY_OFF only for v3+ VBTs, but field testing + * has shown that the v3 sequence works for v2 VBTs too + */ + if (is_vid_mode(intel_dsi)) { + /* Send Shutdown command to the panel in LP mode */ + for_each_dsi_port(port, intel_dsi->ports) + dpi_send_cmd(intel_dsi, SHUTDOWN, false, port); + msleep(10); + } +} + +static void intel_dsi_clear_device_ready(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + + if (IS_GEMINILAKE(dev_priv)) + glk_dsi_clear_device_ready(encoder); + else + vlv_dsi_clear_device_ready(encoder); +} + +static void intel_dsi_post_disable(struct intel_encoder *encoder, + const struct intel_crtc_state *pipe_config, + const struct drm_connector_state *conn_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + enum port port; + u32 val; + + DRM_DEBUG_KMS("\n"); + + if (is_vid_mode(intel_dsi)) { + for_each_dsi_port(port, intel_dsi->ports) + vlv_dsi_wait_for_fifo_empty(intel_dsi, port); + + intel_dsi_port_disable(encoder); + usleep_range(2000, 5000); + } + + intel_dsi_unprepare(encoder); + + /* + * if disable packets are sent before sending shutdown packet then in + * some next enable sequence send turn on packet error is observed + */ + if (is_cmd_mode(intel_dsi)) + intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_TEAR_OFF); + intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DISPLAY_OFF); + + /* Transition to LP-00 */ + intel_dsi_clear_device_ready(encoder); + + if (IS_BROXTON(dev_priv)) { + /* Power down DSI regulator to save power */ + I915_WRITE(BXT_P_DSI_REGULATOR_CFG, STAP_SELECT); + I915_WRITE(BXT_P_DSI_REGULATOR_TX_CTRL, HS_IO_CTRL_SELECT); + + /* Add MIPI IO reset programming for modeset */ + val = I915_READ(BXT_P_CR_GT_DISP_PWRON); + I915_WRITE(BXT_P_CR_GT_DISP_PWRON, + val & ~MIPIO_RST_CTRL); + } + + if (IS_GEN9_LP(dev_priv)) { + bxt_dsi_pll_disable(encoder); + } else { + u32 val; + + vlv_dsi_pll_disable(encoder); + + val = I915_READ(DSPCLK_GATE_D); + val &= ~DPOUNIT_CLOCK_GATE_DISABLE; + I915_WRITE(DSPCLK_GATE_D, val); + } + + /* Assert reset */ + intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_ASSERT_RESET); + + /* Power off, try both CRC pmic gpio and VBT */ + intel_dsi_msleep(intel_dsi, intel_dsi->panel_off_delay); + intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_POWER_OFF); + if (intel_dsi->gpio_panel) + gpiod_set_value_cansleep(intel_dsi->gpio_panel, 0); + + /* + * FIXME As we do with eDP, just make a note of the time here + * and perform the wait before the next panel power on. + */ + intel_dsi_msleep(intel_dsi, intel_dsi->panel_pwr_cycle_delay); +} + +static bool intel_dsi_get_hw_state(struct intel_encoder *encoder, + enum pipe *pipe) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + intel_wakeref_t wakeref; + enum port port; + bool active = false; + + DRM_DEBUG_KMS("\n"); + + wakeref = intel_display_power_get_if_enabled(dev_priv, + encoder->power_domain); + if (!wakeref) + return false; + + /* + * On Broxton the PLL needs to be enabled with a valid divider + * configuration, otherwise accessing DSI registers will hang the + * machine. See BSpec North Display Engine registers/MIPI[BXT]. + */ + if (IS_GEN9_LP(dev_priv) && !bxt_dsi_pll_is_enabled(dev_priv)) + goto out_put_power; + + /* XXX: this only works for one DSI output */ + for_each_dsi_port(port, intel_dsi->ports) { + i915_reg_t ctrl_reg = IS_GEN9_LP(dev_priv) ? + BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(port); + bool enabled = I915_READ(ctrl_reg) & DPI_ENABLE; + + /* + * Due to some hardware limitations on VLV/CHV, the DPI enable + * bit in port C control register does not get set. As a + * workaround, check pipe B conf instead. + */ + if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) && + port == PORT_C) + enabled = I915_READ(PIPECONF(PIPE_B)) & PIPECONF_ENABLE; + + /* Try command mode if video mode not enabled */ + if (!enabled) { + u32 tmp = I915_READ(MIPI_DSI_FUNC_PRG(port)); + enabled = tmp & CMD_MODE_DATA_WIDTH_MASK; + } + + if (!enabled) + continue; + + if (!(I915_READ(MIPI_DEVICE_READY(port)) & DEVICE_READY)) + continue; + + if (IS_GEN9_LP(dev_priv)) { + u32 tmp = I915_READ(MIPI_CTRL(port)); + tmp &= BXT_PIPE_SELECT_MASK; + tmp >>= BXT_PIPE_SELECT_SHIFT; + + if (WARN_ON(tmp > PIPE_C)) + continue; + + *pipe = tmp; + } else { + *pipe = port == PORT_A ? PIPE_A : PIPE_B; + } + + active = true; + break; + } + +out_put_power: + intel_display_power_put(dev_priv, encoder->power_domain, wakeref); + + return active; +} + +static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder, + struct intel_crtc_state *pipe_config) +{ + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = to_i915(dev); + struct drm_display_mode *adjusted_mode = + &pipe_config->base.adjusted_mode; + struct drm_display_mode *adjusted_mode_sw; + struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc); + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + unsigned int lane_count = intel_dsi->lane_count; + unsigned int bpp, fmt; + enum port port; + u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp; + u16 hfp_sw, hsync_sw, hbp_sw; + u16 crtc_htotal_sw, crtc_hsync_start_sw, crtc_hsync_end_sw, + crtc_hblank_start_sw, crtc_hblank_end_sw; + + /* FIXME: hw readout should not depend on SW state */ + adjusted_mode_sw = &crtc->config->base.adjusted_mode; + + /* + * Atleast one port is active as encoder->get_config called only if + * encoder->get_hw_state() returns true. + */ + for_each_dsi_port(port, intel_dsi->ports) { + if (I915_READ(BXT_MIPI_PORT_CTRL(port)) & DPI_ENABLE) + break; + } + + fmt = I915_READ(MIPI_DSI_FUNC_PRG(port)) & VID_MODE_FORMAT_MASK; + bpp = mipi_dsi_pixel_format_to_bpp( + pixel_format_from_register_bits(fmt)); + + pipe_config->pipe_bpp = bdw_get_pipemisc_bpp(crtc); + + /* Enable Frame time stamo based scanline reporting */ + adjusted_mode->private_flags |= + I915_MODE_FLAG_GET_SCANLINE_FROM_TIMESTAMP; + + /* In terms of pixels */ + adjusted_mode->crtc_hdisplay = + I915_READ(BXT_MIPI_TRANS_HACTIVE(port)); + adjusted_mode->crtc_vdisplay = + I915_READ(BXT_MIPI_TRANS_VACTIVE(port)); + adjusted_mode->crtc_vtotal = + I915_READ(BXT_MIPI_TRANS_VTOTAL(port)); + + hactive = adjusted_mode->crtc_hdisplay; + hfp = I915_READ(MIPI_HFP_COUNT(port)); + + /* + * Meaningful for video mode non-burst sync pulse mode only, + * can be zero for non-burst sync events and burst modes + */ + hsync = I915_READ(MIPI_HSYNC_PADDING_COUNT(port)); + hbp = I915_READ(MIPI_HBP_COUNT(port)); + + /* harizontal values are in terms of high speed byte clock */ + hfp = pixels_from_txbyteclkhs(hfp, bpp, lane_count, + intel_dsi->burst_mode_ratio); + hsync = pixels_from_txbyteclkhs(hsync, bpp, lane_count, + intel_dsi->burst_mode_ratio); + hbp = pixels_from_txbyteclkhs(hbp, bpp, lane_count, + intel_dsi->burst_mode_ratio); + + if (intel_dsi->dual_link) { + hfp *= 2; + hsync *= 2; + hbp *= 2; + } + + /* vertical values are in terms of lines */ + vfp = I915_READ(MIPI_VFP_COUNT(port)); + vsync = I915_READ(MIPI_VSYNC_PADDING_COUNT(port)); + vbp = I915_READ(MIPI_VBP_COUNT(port)); + + adjusted_mode->crtc_htotal = hactive + hfp + hsync + hbp; + adjusted_mode->crtc_hsync_start = hfp + adjusted_mode->crtc_hdisplay; + adjusted_mode->crtc_hsync_end = hsync + adjusted_mode->crtc_hsync_start; + adjusted_mode->crtc_hblank_start = adjusted_mode->crtc_hdisplay; + adjusted_mode->crtc_hblank_end = adjusted_mode->crtc_htotal; + + adjusted_mode->crtc_vsync_start = vfp + adjusted_mode->crtc_vdisplay; + adjusted_mode->crtc_vsync_end = vsync + adjusted_mode->crtc_vsync_start; + adjusted_mode->crtc_vblank_start = adjusted_mode->crtc_vdisplay; + adjusted_mode->crtc_vblank_end = adjusted_mode->crtc_vtotal; + + /* + * In BXT DSI there is no regs programmed with few horizontal timings + * in Pixels but txbyteclkhs.. So retrieval process adds some + * ROUND_UP ERRORS in the process of PIXELS<==>txbyteclkhs. + * Actually here for the given adjusted_mode, we are calculating the + * value programmed to the port and then back to the horizontal timing + * param in pixels. This is the expected value, including roundup errors + * And if that is same as retrieved value from port, then + * (HW state) adjusted_mode's horizontal timings are corrected to + * match with SW state to nullify the errors. + */ + /* Calculating the value programmed to the Port register */ + hfp_sw = adjusted_mode_sw->crtc_hsync_start - + adjusted_mode_sw->crtc_hdisplay; + hsync_sw = adjusted_mode_sw->crtc_hsync_end - + adjusted_mode_sw->crtc_hsync_start; + hbp_sw = adjusted_mode_sw->crtc_htotal - + adjusted_mode_sw->crtc_hsync_end; + + if (intel_dsi->dual_link) { + hfp_sw /= 2; + hsync_sw /= 2; + hbp_sw /= 2; + } + + hfp_sw = txbyteclkhs(hfp_sw, bpp, lane_count, + intel_dsi->burst_mode_ratio); + hsync_sw = txbyteclkhs(hsync_sw, bpp, lane_count, + intel_dsi->burst_mode_ratio); + hbp_sw = txbyteclkhs(hbp_sw, bpp, lane_count, + intel_dsi->burst_mode_ratio); + + /* Reverse calculating the adjusted mode parameters from port reg vals*/ + hfp_sw = pixels_from_txbyteclkhs(hfp_sw, bpp, lane_count, + intel_dsi->burst_mode_ratio); + hsync_sw = pixels_from_txbyteclkhs(hsync_sw, bpp, lane_count, + intel_dsi->burst_mode_ratio); + hbp_sw = pixels_from_txbyteclkhs(hbp_sw, bpp, lane_count, + intel_dsi->burst_mode_ratio); + + if (intel_dsi->dual_link) { + hfp_sw *= 2; + hsync_sw *= 2; + hbp_sw *= 2; + } + + crtc_htotal_sw = adjusted_mode_sw->crtc_hdisplay + hfp_sw + + hsync_sw + hbp_sw; + crtc_hsync_start_sw = hfp_sw + adjusted_mode_sw->crtc_hdisplay; + crtc_hsync_end_sw = hsync_sw + crtc_hsync_start_sw; + crtc_hblank_start_sw = adjusted_mode_sw->crtc_hdisplay; + crtc_hblank_end_sw = crtc_htotal_sw; + + if (adjusted_mode->crtc_htotal == crtc_htotal_sw) + adjusted_mode->crtc_htotal = adjusted_mode_sw->crtc_htotal; + + if (adjusted_mode->crtc_hsync_start == crtc_hsync_start_sw) + adjusted_mode->crtc_hsync_start = + adjusted_mode_sw->crtc_hsync_start; + + if (adjusted_mode->crtc_hsync_end == crtc_hsync_end_sw) + adjusted_mode->crtc_hsync_end = + adjusted_mode_sw->crtc_hsync_end; + + if (adjusted_mode->crtc_hblank_start == crtc_hblank_start_sw) + adjusted_mode->crtc_hblank_start = + adjusted_mode_sw->crtc_hblank_start; + + if (adjusted_mode->crtc_hblank_end == crtc_hblank_end_sw) + adjusted_mode->crtc_hblank_end = + adjusted_mode_sw->crtc_hblank_end; +} + +static void intel_dsi_get_config(struct intel_encoder *encoder, + struct intel_crtc_state *pipe_config) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + u32 pclk; + DRM_DEBUG_KMS("\n"); + + pipe_config->output_types |= BIT(INTEL_OUTPUT_DSI); + + if (IS_GEN9_LP(dev_priv)) { + bxt_dsi_get_pipe_config(encoder, pipe_config); + pclk = bxt_dsi_get_pclk(encoder, pipe_config); + } else { + pclk = vlv_dsi_get_pclk(encoder, pipe_config); + } + + if (pclk) { + pipe_config->base.adjusted_mode.crtc_clock = pclk; + pipe_config->port_clock = pclk; + } +} + +/* return txclkesc cycles in terms of divider and duration in us */ +static u16 txclkesc(u32 divider, unsigned int us) +{ + switch (divider) { + case ESCAPE_CLOCK_DIVIDER_1: + default: + return 20 * us; + case ESCAPE_CLOCK_DIVIDER_2: + return 10 * us; + case ESCAPE_CLOCK_DIVIDER_4: + return 5 * us; + } +} + +static void set_dsi_timings(struct drm_encoder *encoder, + const struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = to_i915(dev); + struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder); + enum port port; + unsigned int bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format); + unsigned int lane_count = intel_dsi->lane_count; + + u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp; + + hactive = adjusted_mode->crtc_hdisplay; + hfp = adjusted_mode->crtc_hsync_start - adjusted_mode->crtc_hdisplay; + hsync = adjusted_mode->crtc_hsync_end - adjusted_mode->crtc_hsync_start; + hbp = adjusted_mode->crtc_htotal - adjusted_mode->crtc_hsync_end; + + if (intel_dsi->dual_link) { + hactive /= 2; + if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) + hactive += intel_dsi->pixel_overlap; + hfp /= 2; + hsync /= 2; + hbp /= 2; + } + + vfp = adjusted_mode->crtc_vsync_start - adjusted_mode->crtc_vdisplay; + vsync = adjusted_mode->crtc_vsync_end - adjusted_mode->crtc_vsync_start; + vbp = adjusted_mode->crtc_vtotal - adjusted_mode->crtc_vsync_end; + + /* horizontal values are in terms of high speed byte clock */ + hactive = txbyteclkhs(hactive, bpp, lane_count, + intel_dsi->burst_mode_ratio); + hfp = txbyteclkhs(hfp, bpp, lane_count, intel_dsi->burst_mode_ratio); + hsync = txbyteclkhs(hsync, bpp, lane_count, + intel_dsi->burst_mode_ratio); + hbp = txbyteclkhs(hbp, bpp, lane_count, intel_dsi->burst_mode_ratio); + + for_each_dsi_port(port, intel_dsi->ports) { + if (IS_GEN9_LP(dev_priv)) { + /* + * Program hdisplay and vdisplay on MIPI transcoder. + * This is different from calculated hactive and + * vactive, as they are calculated per channel basis, + * whereas these values should be based on resolution. + */ + I915_WRITE(BXT_MIPI_TRANS_HACTIVE(port), + adjusted_mode->crtc_hdisplay); + I915_WRITE(BXT_MIPI_TRANS_VACTIVE(port), + adjusted_mode->crtc_vdisplay); + I915_WRITE(BXT_MIPI_TRANS_VTOTAL(port), + adjusted_mode->crtc_vtotal); + } + + I915_WRITE(MIPI_HACTIVE_AREA_COUNT(port), hactive); + I915_WRITE(MIPI_HFP_COUNT(port), hfp); + + /* meaningful for video mode non-burst sync pulse mode only, + * can be zero for non-burst sync events and burst modes */ + I915_WRITE(MIPI_HSYNC_PADDING_COUNT(port), hsync); + I915_WRITE(MIPI_HBP_COUNT(port), hbp); + + /* vertical values are in terms of lines */ + I915_WRITE(MIPI_VFP_COUNT(port), vfp); + I915_WRITE(MIPI_VSYNC_PADDING_COUNT(port), vsync); + I915_WRITE(MIPI_VBP_COUNT(port), vbp); + } +} + +static u32 pixel_format_to_reg(enum mipi_dsi_pixel_format fmt) +{ + switch (fmt) { + case MIPI_DSI_FMT_RGB888: + return VID_MODE_FORMAT_RGB888; + case MIPI_DSI_FMT_RGB666: + return VID_MODE_FORMAT_RGB666; + case MIPI_DSI_FMT_RGB666_PACKED: + return VID_MODE_FORMAT_RGB666_PACKED; + case MIPI_DSI_FMT_RGB565: + return VID_MODE_FORMAT_RGB565; + default: + MISSING_CASE(fmt); + return VID_MODE_FORMAT_RGB666; + } +} + +static void intel_dsi_prepare(struct intel_encoder *intel_encoder, + const struct intel_crtc_state *pipe_config) +{ + struct drm_encoder *encoder = &intel_encoder->base; + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = to_i915(dev); + struct intel_crtc *intel_crtc = to_intel_crtc(pipe_config->base.crtc); + struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder); + const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode; + enum port port; + unsigned int bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format); + u32 val, tmp; + u16 mode_hdisplay; + + DRM_DEBUG_KMS("pipe %c\n", pipe_name(intel_crtc->pipe)); + + mode_hdisplay = adjusted_mode->crtc_hdisplay; + + if (intel_dsi->dual_link) { + mode_hdisplay /= 2; + if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) + mode_hdisplay += intel_dsi->pixel_overlap; + } + + for_each_dsi_port(port, intel_dsi->ports) { + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { + /* + * escape clock divider, 20MHz, shared for A and C. + * device ready must be off when doing this! txclkesc? + */ + tmp = I915_READ(MIPI_CTRL(PORT_A)); + tmp &= ~ESCAPE_CLOCK_DIVIDER_MASK; + I915_WRITE(MIPI_CTRL(PORT_A), tmp | + ESCAPE_CLOCK_DIVIDER_1); + + /* read request priority is per pipe */ + tmp = I915_READ(MIPI_CTRL(port)); + tmp &= ~READ_REQUEST_PRIORITY_MASK; + I915_WRITE(MIPI_CTRL(port), tmp | + READ_REQUEST_PRIORITY_HIGH); + } else if (IS_GEN9_LP(dev_priv)) { + enum pipe pipe = intel_crtc->pipe; + + tmp = I915_READ(MIPI_CTRL(port)); + tmp &= ~BXT_PIPE_SELECT_MASK; + + tmp |= BXT_PIPE_SELECT(pipe); + I915_WRITE(MIPI_CTRL(port), tmp); + } + + /* XXX: why here, why like this? handling in irq handler?! */ + I915_WRITE(MIPI_INTR_STAT(port), 0xffffffff); + I915_WRITE(MIPI_INTR_EN(port), 0xffffffff); + + I915_WRITE(MIPI_DPHY_PARAM(port), intel_dsi->dphy_reg); + + I915_WRITE(MIPI_DPI_RESOLUTION(port), + adjusted_mode->crtc_vdisplay << VERTICAL_ADDRESS_SHIFT | + mode_hdisplay << HORIZONTAL_ADDRESS_SHIFT); + } + + set_dsi_timings(encoder, adjusted_mode); + + val = intel_dsi->lane_count << DATA_LANES_PRG_REG_SHIFT; + if (is_cmd_mode(intel_dsi)) { + val |= intel_dsi->channel << CMD_MODE_CHANNEL_NUMBER_SHIFT; + val |= CMD_MODE_DATA_WIDTH_8_BIT; /* XXX */ + } else { + val |= intel_dsi->channel << VID_MODE_CHANNEL_NUMBER_SHIFT; + val |= pixel_format_to_reg(intel_dsi->pixel_format); + } + + tmp = 0; + if (intel_dsi->eotp_pkt == 0) + tmp |= EOT_DISABLE; + if (intel_dsi->clock_stop) + tmp |= CLOCKSTOP; + + if (IS_GEN9_LP(dev_priv)) { + tmp |= BXT_DPHY_DEFEATURE_EN; + if (!is_cmd_mode(intel_dsi)) + tmp |= BXT_DEFEATURE_DPI_FIFO_CTR; + } + + for_each_dsi_port(port, intel_dsi->ports) { + I915_WRITE(MIPI_DSI_FUNC_PRG(port), val); + + /* timeouts for recovery. one frame IIUC. if counter expires, + * EOT and stop state. */ + + /* + * In burst mode, value greater than one DPI line Time in byte + * clock (txbyteclkhs) To timeout this timer 1+ of the above + * said value is recommended. + * + * In non-burst mode, Value greater than one DPI frame time in + * byte clock(txbyteclkhs) To timeout this timer 1+ of the above + * said value is recommended. + * + * In DBI only mode, value greater than one DBI frame time in + * byte clock(txbyteclkhs) To timeout this timer 1+ of the above + * said value is recommended. + */ + + if (is_vid_mode(intel_dsi) && + intel_dsi->video_mode_format == VIDEO_MODE_BURST) { + I915_WRITE(MIPI_HS_TX_TIMEOUT(port), + txbyteclkhs(adjusted_mode->crtc_htotal, bpp, + intel_dsi->lane_count, + intel_dsi->burst_mode_ratio) + 1); + } else { + I915_WRITE(MIPI_HS_TX_TIMEOUT(port), + txbyteclkhs(adjusted_mode->crtc_vtotal * + adjusted_mode->crtc_htotal, + bpp, intel_dsi->lane_count, + intel_dsi->burst_mode_ratio) + 1); + } + I915_WRITE(MIPI_LP_RX_TIMEOUT(port), intel_dsi->lp_rx_timeout); + I915_WRITE(MIPI_TURN_AROUND_TIMEOUT(port), + intel_dsi->turn_arnd_val); + I915_WRITE(MIPI_DEVICE_RESET_TIMER(port), + intel_dsi->rst_timer_val); + + /* dphy stuff */ + + /* in terms of low power clock */ + I915_WRITE(MIPI_INIT_COUNT(port), + txclkesc(intel_dsi->escape_clk_div, 100)); + + if (IS_GEN9_LP(dev_priv) && (!intel_dsi->dual_link)) { + /* + * BXT spec says write MIPI_INIT_COUNT for + * both the ports, even if only one is + * getting used. So write the other port + * if not in dual link mode. + */ + I915_WRITE(MIPI_INIT_COUNT(port == + PORT_A ? PORT_C : PORT_A), + intel_dsi->init_count); + } + + /* recovery disables */ + I915_WRITE(MIPI_EOT_DISABLE(port), tmp); + + /* in terms of low power clock */ + I915_WRITE(MIPI_INIT_COUNT(port), intel_dsi->init_count); + + /* in terms of txbyteclkhs. actual high to low switch + + * MIPI_STOP_STATE_STALL * MIPI_LP_BYTECLK. + * + * XXX: write MIPI_STOP_STATE_STALL? + */ + I915_WRITE(MIPI_HIGH_LOW_SWITCH_COUNT(port), + intel_dsi->hs_to_lp_count); + + /* XXX: low power clock equivalence in terms of byte clock. + * the number of byte clocks occupied in one low power clock. + * based on txbyteclkhs and txclkesc. + * txclkesc time / txbyteclk time * (105 + MIPI_STOP_STATE_STALL + * ) / 105.??? + */ + I915_WRITE(MIPI_LP_BYTECLK(port), intel_dsi->lp_byte_clk); + + if (IS_GEMINILAKE(dev_priv)) { + I915_WRITE(MIPI_TLPX_TIME_COUNT(port), + intel_dsi->lp_byte_clk); + /* Shadow of DPHY reg */ + I915_WRITE(MIPI_CLK_LANE_TIMING(port), + intel_dsi->dphy_reg); + } + + /* the bw essential for transmitting 16 long packets containing + * 252 bytes meant for dcs write memory command is programmed in + * this register in terms of byte clocks. based on dsi transfer + * rate and the number of lanes configured the time taken to + * transmit 16 long packets in a dsi stream varies. */ + I915_WRITE(MIPI_DBI_BW_CTRL(port), intel_dsi->bw_timer); + + I915_WRITE(MIPI_CLK_LANE_SWITCH_TIME_CNT(port), + intel_dsi->clk_lp_to_hs_count << LP_HS_SSW_CNT_SHIFT | + intel_dsi->clk_hs_to_lp_count << HS_LP_PWR_SW_CNT_SHIFT); + + if (is_vid_mode(intel_dsi)) + /* Some panels might have resolution which is not a + * multiple of 64 like 1366 x 768. Enable RANDOM + * resolution support for such panels by default */ + I915_WRITE(MIPI_VIDEO_MODE_FORMAT(port), + intel_dsi->video_frmt_cfg_bits | + intel_dsi->video_mode_format | + IP_TG_CONFIG | + RANDOM_DPI_DISPLAY_RESOLUTION); + } +} + +static void intel_dsi_unprepare(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + enum port port; + u32 val; + + if (IS_GEMINILAKE(dev_priv)) + return; + + for_each_dsi_port(port, intel_dsi->ports) { + /* Panel commands can be sent when clock is in LP11 */ + I915_WRITE(MIPI_DEVICE_READY(port), 0x0); + + if (IS_GEN9_LP(dev_priv)) + bxt_dsi_reset_clocks(encoder, port); + else + vlv_dsi_reset_clocks(encoder, port); + I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP); + + val = I915_READ(MIPI_DSI_FUNC_PRG(port)); + val &= ~VID_MODE_FORMAT_MASK; + I915_WRITE(MIPI_DSI_FUNC_PRG(port), val); + + I915_WRITE(MIPI_DEVICE_READY(port), 0x1); + } +} + +static void intel_dsi_encoder_destroy(struct drm_encoder *encoder) +{ + struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder); + + /* dispose of the gpios */ + if (intel_dsi->gpio_panel) + gpiod_put(intel_dsi->gpio_panel); + + intel_encoder_destroy(encoder); +} + +static const struct drm_encoder_funcs intel_dsi_funcs = { + .destroy = intel_dsi_encoder_destroy, +}; + +static const struct drm_connector_helper_funcs intel_dsi_connector_helper_funcs = { + .get_modes = intel_dsi_get_modes, + .mode_valid = intel_dsi_mode_valid, + .atomic_check = intel_digital_connector_atomic_check, +}; + +static const struct drm_connector_funcs intel_dsi_connector_funcs = { + .late_register = intel_connector_register, + .early_unregister = intel_connector_unregister, + .destroy = intel_connector_destroy, + .fill_modes = drm_helper_probe_single_connector_modes, + .atomic_get_property = intel_digital_connector_atomic_get_property, + .atomic_set_property = intel_digital_connector_atomic_set_property, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, + .atomic_duplicate_state = intel_digital_connector_duplicate_state, +}; + +static enum drm_panel_orientation +vlv_dsi_get_hw_panel_orientation(struct intel_connector *connector) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_encoder *encoder = connector->encoder; + enum intel_display_power_domain power_domain; + enum drm_panel_orientation orientation; + struct intel_plane *plane; + struct intel_crtc *crtc; + intel_wakeref_t wakeref; + enum pipe pipe; + u32 val; + + if (!encoder->get_hw_state(encoder, &pipe)) + return DRM_MODE_PANEL_ORIENTATION_UNKNOWN; + + crtc = intel_get_crtc_for_pipe(dev_priv, pipe); + plane = to_intel_plane(crtc->base.primary); + + power_domain = POWER_DOMAIN_PIPE(pipe); + wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain); + if (!wakeref) + return DRM_MODE_PANEL_ORIENTATION_UNKNOWN; + + val = I915_READ(DSPCNTR(plane->i9xx_plane)); + + if (!(val & DISPLAY_PLANE_ENABLE)) + orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN; + else if (val & DISPPLANE_ROTATE_180) + orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP; + else + orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL; + + intel_display_power_put(dev_priv, power_domain, wakeref); + + return orientation; +} + +static enum drm_panel_orientation +vlv_dsi_get_panel_orientation(struct intel_connector *connector) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + enum drm_panel_orientation orientation; + + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { + orientation = vlv_dsi_get_hw_panel_orientation(connector); + if (orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN) + return orientation; + } + + return intel_dsi_get_panel_orientation(connector); +} + +static void intel_dsi_add_properties(struct intel_connector *connector) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + + if (connector->panel.fixed_mode) { + u32 allowed_scalers; + + allowed_scalers = BIT(DRM_MODE_SCALE_ASPECT) | BIT(DRM_MODE_SCALE_FULLSCREEN); + if (!HAS_GMCH(dev_priv)) + allowed_scalers |= BIT(DRM_MODE_SCALE_CENTER); + + drm_connector_attach_scaling_mode_property(&connector->base, + allowed_scalers); + + connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT; + + connector->base.display_info.panel_orientation = + vlv_dsi_get_panel_orientation(connector); + drm_connector_init_panel_orientation_property( + &connector->base, + connector->panel.fixed_mode->hdisplay, + connector->panel.fixed_mode->vdisplay); + } +} + +#define NS_KHZ_RATIO 1000000 + +#define PREPARE_CNT_MAX 0x3F +#define EXIT_ZERO_CNT_MAX 0x3F +#define CLK_ZERO_CNT_MAX 0xFF +#define TRAIL_CNT_MAX 0x1F + +static void vlv_dphy_param_init(struct intel_dsi *intel_dsi) +{ + struct drm_device *dev = intel_dsi->base.base.dev; + struct drm_i915_private *dev_priv = to_i915(dev); + struct mipi_config *mipi_config = dev_priv->vbt.dsi.config; + u32 tlpx_ns, extra_byte_count, tlpx_ui; + u32 ui_num, ui_den; + u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt; + u32 ths_prepare_ns, tclk_trail_ns; + u32 tclk_prepare_clkzero, ths_prepare_hszero; + u32 lp_to_hs_switch, hs_to_lp_switch; + u32 mul; + + tlpx_ns = intel_dsi_tlpx_ns(intel_dsi); + + switch (intel_dsi->lane_count) { + case 1: + case 2: + extra_byte_count = 2; + break; + case 3: + extra_byte_count = 4; + break; + case 4: + default: + extra_byte_count = 3; + break; + } + + /* in Kbps */ + ui_num = NS_KHZ_RATIO; + ui_den = intel_dsi_bitrate(intel_dsi); + + tclk_prepare_clkzero = mipi_config->tclk_prepare_clkzero; + ths_prepare_hszero = mipi_config->ths_prepare_hszero; + + /* + * B060 + * LP byte clock = TLPX/ (8UI) + */ + intel_dsi->lp_byte_clk = DIV_ROUND_UP(tlpx_ns * ui_den, 8 * ui_num); + + /* DDR clock period = 2 * UI + * UI(sec) = 1/(bitrate * 10^3) (bitrate is in KHZ) + * UI(nsec) = 10^6 / bitrate + * DDR clock period (nsec) = 2 * UI = (2 * 10^6)/ bitrate + * DDR clock count = ns_value / DDR clock period + * + * For GEMINILAKE dphy_param_reg will be programmed in terms of + * HS byte clock count for other platform in HS ddr clock count + */ + mul = IS_GEMINILAKE(dev_priv) ? 8 : 2; + ths_prepare_ns = max(mipi_config->ths_prepare, + mipi_config->tclk_prepare); + + /* prepare count */ + prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * ui_den, ui_num * mul); + + if (prepare_cnt > PREPARE_CNT_MAX) { + DRM_DEBUG_KMS("prepare count too high %u\n", prepare_cnt); + prepare_cnt = PREPARE_CNT_MAX; + } + + /* exit zero count */ + exit_zero_cnt = DIV_ROUND_UP( + (ths_prepare_hszero - ths_prepare_ns) * ui_den, + ui_num * mul + ); + + /* + * Exit zero is unified val ths_zero and ths_exit + * minimum value for ths_exit = 110ns + * min (exit_zero_cnt * 2) = 110/UI + * exit_zero_cnt = 55/UI + */ + if (exit_zero_cnt < (55 * ui_den / ui_num) && (55 * ui_den) % ui_num) + exit_zero_cnt += 1; + + if (exit_zero_cnt > EXIT_ZERO_CNT_MAX) { + DRM_DEBUG_KMS("exit zero count too high %u\n", exit_zero_cnt); + exit_zero_cnt = EXIT_ZERO_CNT_MAX; + } + + /* clk zero count */ + clk_zero_cnt = DIV_ROUND_UP( + (tclk_prepare_clkzero - ths_prepare_ns) + * ui_den, ui_num * mul); + + if (clk_zero_cnt > CLK_ZERO_CNT_MAX) { + DRM_DEBUG_KMS("clock zero count too high %u\n", clk_zero_cnt); + clk_zero_cnt = CLK_ZERO_CNT_MAX; + } + + /* trail count */ + tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail); + trail_cnt = DIV_ROUND_UP(tclk_trail_ns * ui_den, ui_num * mul); + + if (trail_cnt > TRAIL_CNT_MAX) { + DRM_DEBUG_KMS("trail count too high %u\n", trail_cnt); + trail_cnt = TRAIL_CNT_MAX; + } + + /* B080 */ + intel_dsi->dphy_reg = exit_zero_cnt << 24 | trail_cnt << 16 | + clk_zero_cnt << 8 | prepare_cnt; + + /* + * LP to HS switch count = 4TLPX + PREP_COUNT * mul + EXIT_ZERO_COUNT * + * mul + 10UI + Extra Byte Count + * + * HS to LP switch count = THS-TRAIL + 2TLPX + Extra Byte Count + * Extra Byte Count is calculated according to number of lanes. + * High Low Switch Count is the Max of LP to HS and + * HS to LP switch count + * + */ + tlpx_ui = DIV_ROUND_UP(tlpx_ns * ui_den, ui_num); + + /* B044 */ + /* FIXME: + * The comment above does not match with the code */ + lp_to_hs_switch = DIV_ROUND_UP(4 * tlpx_ui + prepare_cnt * mul + + exit_zero_cnt * mul + 10, 8); + + hs_to_lp_switch = DIV_ROUND_UP(mipi_config->ths_trail + 2 * tlpx_ui, 8); + + intel_dsi->hs_to_lp_count = max(lp_to_hs_switch, hs_to_lp_switch); + intel_dsi->hs_to_lp_count += extra_byte_count; + + /* B088 */ + /* LP -> HS for clock lanes + * LP clk sync + LP11 + LP01 + tclk_prepare + tclk_zero + + * extra byte count + * 2TPLX + 1TLPX + 1 TPLX(in ns) + prepare_cnt * 2 + clk_zero_cnt * + * 2(in UI) + extra byte count + * In byteclks = (4TLPX + prepare_cnt * 2 + clk_zero_cnt *2 (in UI)) / + * 8 + extra byte count + */ + intel_dsi->clk_lp_to_hs_count = + DIV_ROUND_UP( + 4 * tlpx_ui + prepare_cnt * 2 + + clk_zero_cnt * 2, + 8); + + intel_dsi->clk_lp_to_hs_count += extra_byte_count; + + /* HS->LP for Clock Lanes + * Low Power clock synchronisations + 1Tx byteclk + tclk_trail + + * Extra byte count + * 2TLPX + 8UI + (trail_count*2)(in UI) + Extra byte count + * In byteclks = (2*TLpx(in UI) + trail_count*2 +8)(in UI)/8 + + * Extra byte count + */ + intel_dsi->clk_hs_to_lp_count = + DIV_ROUND_UP(2 * tlpx_ui + trail_cnt * 2 + 8, + 8); + intel_dsi->clk_hs_to_lp_count += extra_byte_count; + + intel_dsi_log_params(intel_dsi); +} + +void vlv_dsi_init(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = &dev_priv->drm; + struct intel_dsi *intel_dsi; + struct intel_encoder *intel_encoder; + struct drm_encoder *encoder; + struct intel_connector *intel_connector; + struct drm_connector *connector; + struct drm_display_mode *current_mode, *fixed_mode; + enum port port; + + DRM_DEBUG_KMS("\n"); + + /* There is no detection method for MIPI so rely on VBT */ + if (!intel_bios_is_dsi_present(dev_priv, &port)) + return; + + if (IS_GEN9_LP(dev_priv)) + dev_priv->mipi_mmio_base = BXT_MIPI_BASE; + else + dev_priv->mipi_mmio_base = VLV_MIPI_BASE; + + intel_dsi = kzalloc(sizeof(*intel_dsi), GFP_KERNEL); + if (!intel_dsi) + return; + + intel_connector = intel_connector_alloc(); + if (!intel_connector) { + kfree(intel_dsi); + return; + } + + intel_encoder = &intel_dsi->base; + encoder = &intel_encoder->base; + intel_dsi->attached_connector = intel_connector; + + connector = &intel_connector->base; + + drm_encoder_init(dev, encoder, &intel_dsi_funcs, DRM_MODE_ENCODER_DSI, + "DSI %c", port_name(port)); + + intel_encoder->compute_config = intel_dsi_compute_config; + intel_encoder->pre_enable = intel_dsi_pre_enable; + intel_encoder->disable = intel_dsi_disable; + intel_encoder->post_disable = intel_dsi_post_disable; + intel_encoder->get_hw_state = intel_dsi_get_hw_state; + intel_encoder->get_config = intel_dsi_get_config; + intel_encoder->update_pipe = intel_panel_update_backlight; + + intel_connector->get_hw_state = intel_connector_get_hw_state; + + intel_encoder->port = port; + intel_encoder->type = INTEL_OUTPUT_DSI; + intel_encoder->power_domain = POWER_DOMAIN_PORT_DSI; + intel_encoder->cloneable = 0; + + /* + * On BYT/CHV, pipe A maps to MIPI DSI port A, pipe B maps to MIPI DSI + * port C. BXT isn't limited like this. + */ + if (IS_GEN9_LP(dev_priv)) + intel_encoder->crtc_mask = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C); + else if (port == PORT_A) + intel_encoder->crtc_mask = BIT(PIPE_A); + else + intel_encoder->crtc_mask = BIT(PIPE_B); + + if (dev_priv->vbt.dsi.config->dual_link) + intel_dsi->ports = BIT(PORT_A) | BIT(PORT_C); + else + intel_dsi->ports = BIT(port); + + intel_dsi->dcs_backlight_ports = dev_priv->vbt.dsi.bl_ports; + intel_dsi->dcs_cabc_ports = dev_priv->vbt.dsi.cabc_ports; + + /* Create a DSI host (and a device) for each port. */ + for_each_dsi_port(port, intel_dsi->ports) { + struct intel_dsi_host *host; + + host = intel_dsi_host_init(intel_dsi, &intel_dsi_host_ops, + port); + if (!host) + goto err; + + intel_dsi->dsi_hosts[port] = host; + } + + if (!intel_dsi_vbt_init(intel_dsi, MIPI_DSI_GENERIC_PANEL_ID)) { + DRM_DEBUG_KMS("no device found\n"); + goto err; + } + + /* Use clock read-back from current hw-state for fastboot */ + current_mode = intel_encoder_current_mode(intel_encoder); + if (current_mode) { + DRM_DEBUG_KMS("Calculated pclk %d GOP %d\n", + intel_dsi->pclk, current_mode->clock); + if (intel_fuzzy_clock_check(intel_dsi->pclk, + current_mode->clock)) { + DRM_DEBUG_KMS("Using GOP pclk\n"); + intel_dsi->pclk = current_mode->clock; + } + + kfree(current_mode); + } + + vlv_dphy_param_init(intel_dsi); + + /* + * In case of BYT with CRC PMIC, we need to use GPIO for + * Panel control. + */ + if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) && + (dev_priv->vbt.dsi.config->pwm_blc == PPS_BLC_PMIC)) { + intel_dsi->gpio_panel = + gpiod_get(dev->dev, "panel", GPIOD_OUT_HIGH); + + if (IS_ERR(intel_dsi->gpio_panel)) { + DRM_ERROR("Failed to own gpio for panel control\n"); + intel_dsi->gpio_panel = NULL; + } + } + + drm_connector_init(dev, connector, &intel_dsi_connector_funcs, + DRM_MODE_CONNECTOR_DSI); + + drm_connector_helper_add(connector, &intel_dsi_connector_helper_funcs); + + connector->display_info.subpixel_order = SubPixelHorizontalRGB; /*XXX*/ + connector->interlace_allowed = false; + connector->doublescan_allowed = false; + + intel_connector_attach_encoder(intel_connector, intel_encoder); + + mutex_lock(&dev->mode_config.mutex); + fixed_mode = intel_panel_vbt_fixed_mode(intel_connector); + mutex_unlock(&dev->mode_config.mutex); + + if (!fixed_mode) { + DRM_DEBUG_KMS("no fixed mode\n"); + goto err_cleanup_connector; + } + + intel_panel_init(&intel_connector->panel, fixed_mode, NULL); + intel_panel_setup_backlight(connector, INVALID_PIPE); + + intel_dsi_add_properties(intel_connector); + + return; + +err_cleanup_connector: + drm_connector_cleanup(&intel_connector->base); +err: + drm_encoder_cleanup(&intel_encoder->base); + kfree(intel_dsi); + kfree(intel_connector); +} |