diff options
Diffstat (limited to 'drivers/gpu/drm/i915/display/intel_panel.c')
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_panel.c | 2051 |
1 files changed, 2051 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/display/intel_panel.c b/drivers/gpu/drm/i915/display/intel_panel.c new file mode 100644 index 000000000000..39d742094065 --- /dev/null +++ b/drivers/gpu/drm/i915/display/intel_panel.c @@ -0,0 +1,2051 @@ +/* + * Copyright © 2006-2010 Intel Corporation + * Copyright (c) 2006 Dave Airlie <airlied@linux.ie> + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * Dave Airlie <airlied@linux.ie> + * Jesse Barnes <jesse.barnes@intel.com> + * Chris Wilson <chris@chris-wilson.co.uk> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/moduleparam.h> +#include <linux/pwm.h> + +#include "intel_connector.h" +#include "intel_dp_aux_backlight.h" +#include "intel_drv.h" +#include "intel_dsi_dcs_backlight.h" +#include "intel_panel.h" + +#define CRC_PMIC_PWM_PERIOD_NS 21333 + +void +intel_fixed_panel_mode(const struct drm_display_mode *fixed_mode, + struct drm_display_mode *adjusted_mode) +{ + drm_mode_copy(adjusted_mode, fixed_mode); + + drm_mode_set_crtcinfo(adjusted_mode, 0); +} + +static bool is_downclock_mode(const struct drm_display_mode *downclock_mode, + const struct drm_display_mode *fixed_mode) +{ + return drm_mode_match(downclock_mode, fixed_mode, + DRM_MODE_MATCH_TIMINGS | + DRM_MODE_MATCH_FLAGS | + DRM_MODE_MATCH_3D_FLAGS) && + downclock_mode->clock < fixed_mode->clock; +} + +struct drm_display_mode * +intel_panel_edid_downclock_mode(struct intel_connector *connector, + const struct drm_display_mode *fixed_mode) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + const struct drm_display_mode *scan, *best_mode = NULL; + struct drm_display_mode *downclock_mode; + int best_clock = fixed_mode->clock; + + list_for_each_entry(scan, &connector->base.probed_modes, head) { + /* + * If one mode has the same resolution with the fixed_panel + * mode while they have the different refresh rate, it means + * that the reduced downclock is found. In such + * case we can set the different FPx0/1 to dynamically select + * between low and high frequency. + */ + if (is_downclock_mode(scan, fixed_mode) && + scan->clock < best_clock) { + /* + * The downclock is already found. But we + * expect to find the lower downclock. + */ + best_clock = scan->clock; + best_mode = scan; + } + } + + if (!best_mode) + return NULL; + + downclock_mode = drm_mode_duplicate(&dev_priv->drm, best_mode); + if (!downclock_mode) + return NULL; + + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] using downclock mode from EDID: ", + connector->base.base.id, connector->base.name); + drm_mode_debug_printmodeline(downclock_mode); + + return downclock_mode; +} + +struct drm_display_mode * +intel_panel_edid_fixed_mode(struct intel_connector *connector) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + const struct drm_display_mode *scan; + struct drm_display_mode *fixed_mode; + + if (list_empty(&connector->base.probed_modes)) + return NULL; + + /* prefer fixed mode from EDID if available */ + list_for_each_entry(scan, &connector->base.probed_modes, head) { + if ((scan->type & DRM_MODE_TYPE_PREFERRED) == 0) + continue; + + fixed_mode = drm_mode_duplicate(&dev_priv->drm, scan); + if (!fixed_mode) + return NULL; + + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] using preferred mode from EDID: ", + connector->base.base.id, connector->base.name); + drm_mode_debug_printmodeline(fixed_mode); + + return fixed_mode; + } + + scan = list_first_entry(&connector->base.probed_modes, + typeof(*scan), head); + + fixed_mode = drm_mode_duplicate(&dev_priv->drm, scan); + if (!fixed_mode) + return NULL; + + fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; + + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] using first mode from EDID: ", + connector->base.base.id, connector->base.name); + drm_mode_debug_printmodeline(fixed_mode); + + return fixed_mode; +} + +struct drm_display_mode * +intel_panel_vbt_fixed_mode(struct intel_connector *connector) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct drm_display_info *info = &connector->base.display_info; + struct drm_display_mode *fixed_mode; + + if (!dev_priv->vbt.lfp_lvds_vbt_mode) + return NULL; + + fixed_mode = drm_mode_duplicate(&dev_priv->drm, + dev_priv->vbt.lfp_lvds_vbt_mode); + if (!fixed_mode) + return NULL; + + fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; + + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] using mode from VBT: ", + connector->base.base.id, connector->base.name); + drm_mode_debug_printmodeline(fixed_mode); + + info->width_mm = fixed_mode->width_mm; + info->height_mm = fixed_mode->height_mm; + + return fixed_mode; +} + +/* adjusted_mode has been preset to be the panel's fixed mode */ +void +intel_pch_panel_fitting(struct intel_crtc *intel_crtc, + struct intel_crtc_state *pipe_config, + int fitting_mode) +{ + const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode; + int x = 0, y = 0, width = 0, height = 0; + + /* Native modes don't need fitting */ + if (adjusted_mode->crtc_hdisplay == pipe_config->pipe_src_w && + adjusted_mode->crtc_vdisplay == pipe_config->pipe_src_h && + pipe_config->output_format != INTEL_OUTPUT_FORMAT_YCBCR420) + goto done; + + switch (fitting_mode) { + case DRM_MODE_SCALE_CENTER: + width = pipe_config->pipe_src_w; + height = pipe_config->pipe_src_h; + x = (adjusted_mode->crtc_hdisplay - width + 1)/2; + y = (adjusted_mode->crtc_vdisplay - height + 1)/2; + break; + + case DRM_MODE_SCALE_ASPECT: + /* Scale but preserve the aspect ratio */ + { + u32 scaled_width = adjusted_mode->crtc_hdisplay + * pipe_config->pipe_src_h; + u32 scaled_height = pipe_config->pipe_src_w + * adjusted_mode->crtc_vdisplay; + if (scaled_width > scaled_height) { /* pillar */ + width = scaled_height / pipe_config->pipe_src_h; + if (width & 1) + width++; + x = (adjusted_mode->crtc_hdisplay - width + 1) / 2; + y = 0; + height = adjusted_mode->crtc_vdisplay; + } else if (scaled_width < scaled_height) { /* letter */ + height = scaled_width / pipe_config->pipe_src_w; + if (height & 1) + height++; + y = (adjusted_mode->crtc_vdisplay - height + 1) / 2; + x = 0; + width = adjusted_mode->crtc_hdisplay; + } else { + x = y = 0; + width = adjusted_mode->crtc_hdisplay; + height = adjusted_mode->crtc_vdisplay; + } + } + break; + + case DRM_MODE_SCALE_FULLSCREEN: + x = y = 0; + width = adjusted_mode->crtc_hdisplay; + height = adjusted_mode->crtc_vdisplay; + break; + + default: + WARN(1, "bad panel fit mode: %d\n", fitting_mode); + return; + } + +done: + pipe_config->pch_pfit.pos = (x << 16) | y; + pipe_config->pch_pfit.size = (width << 16) | height; + pipe_config->pch_pfit.enabled = pipe_config->pch_pfit.size != 0; +} + +static void +centre_horizontally(struct drm_display_mode *adjusted_mode, + int width) +{ + u32 border, sync_pos, blank_width, sync_width; + + /* keep the hsync and hblank widths constant */ + sync_width = adjusted_mode->crtc_hsync_end - adjusted_mode->crtc_hsync_start; + blank_width = adjusted_mode->crtc_hblank_end - adjusted_mode->crtc_hblank_start; + sync_pos = (blank_width - sync_width + 1) / 2; + + border = (adjusted_mode->crtc_hdisplay - width + 1) / 2; + border += border & 1; /* make the border even */ + + adjusted_mode->crtc_hdisplay = width; + adjusted_mode->crtc_hblank_start = width + border; + adjusted_mode->crtc_hblank_end = adjusted_mode->crtc_hblank_start + blank_width; + + adjusted_mode->crtc_hsync_start = adjusted_mode->crtc_hblank_start + sync_pos; + adjusted_mode->crtc_hsync_end = adjusted_mode->crtc_hsync_start + sync_width; +} + +static void +centre_vertically(struct drm_display_mode *adjusted_mode, + int height) +{ + u32 border, sync_pos, blank_width, sync_width; + + /* keep the vsync and vblank widths constant */ + sync_width = adjusted_mode->crtc_vsync_end - adjusted_mode->crtc_vsync_start; + blank_width = adjusted_mode->crtc_vblank_end - adjusted_mode->crtc_vblank_start; + sync_pos = (blank_width - sync_width + 1) / 2; + + border = (adjusted_mode->crtc_vdisplay - height + 1) / 2; + + adjusted_mode->crtc_vdisplay = height; + adjusted_mode->crtc_vblank_start = height + border; + adjusted_mode->crtc_vblank_end = adjusted_mode->crtc_vblank_start + blank_width; + + adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vblank_start + sync_pos; + adjusted_mode->crtc_vsync_end = adjusted_mode->crtc_vsync_start + sync_width; +} + +static inline u32 panel_fitter_scaling(u32 source, u32 target) +{ + /* + * Floating point operation is not supported. So the FACTOR + * is defined, which can avoid the floating point computation + * when calculating the panel ratio. + */ +#define ACCURACY 12 +#define FACTOR (1 << ACCURACY) + u32 ratio = source * FACTOR / target; + return (FACTOR * ratio + FACTOR/2) / FACTOR; +} + +static void i965_scale_aspect(struct intel_crtc_state *pipe_config, + u32 *pfit_control) +{ + const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode; + u32 scaled_width = adjusted_mode->crtc_hdisplay * + pipe_config->pipe_src_h; + u32 scaled_height = pipe_config->pipe_src_w * + adjusted_mode->crtc_vdisplay; + + /* 965+ is easy, it does everything in hw */ + if (scaled_width > scaled_height) + *pfit_control |= PFIT_ENABLE | + PFIT_SCALING_PILLAR; + else if (scaled_width < scaled_height) + *pfit_control |= PFIT_ENABLE | + PFIT_SCALING_LETTER; + else if (adjusted_mode->crtc_hdisplay != pipe_config->pipe_src_w) + *pfit_control |= PFIT_ENABLE | PFIT_SCALING_AUTO; +} + +static void i9xx_scale_aspect(struct intel_crtc_state *pipe_config, + u32 *pfit_control, u32 *pfit_pgm_ratios, + u32 *border) +{ + struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode; + u32 scaled_width = adjusted_mode->crtc_hdisplay * + pipe_config->pipe_src_h; + u32 scaled_height = pipe_config->pipe_src_w * + adjusted_mode->crtc_vdisplay; + u32 bits; + + /* + * For earlier chips we have to calculate the scaling + * ratio by hand and program it into the + * PFIT_PGM_RATIO register + */ + if (scaled_width > scaled_height) { /* pillar */ + centre_horizontally(adjusted_mode, + scaled_height / + pipe_config->pipe_src_h); + + *border = LVDS_BORDER_ENABLE; + if (pipe_config->pipe_src_h != adjusted_mode->crtc_vdisplay) { + bits = panel_fitter_scaling(pipe_config->pipe_src_h, + adjusted_mode->crtc_vdisplay); + + *pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT | + bits << PFIT_VERT_SCALE_SHIFT); + *pfit_control |= (PFIT_ENABLE | + VERT_INTERP_BILINEAR | + HORIZ_INTERP_BILINEAR); + } + } else if (scaled_width < scaled_height) { /* letter */ + centre_vertically(adjusted_mode, + scaled_width / + pipe_config->pipe_src_w); + + *border = LVDS_BORDER_ENABLE; + if (pipe_config->pipe_src_w != adjusted_mode->crtc_hdisplay) { + bits = panel_fitter_scaling(pipe_config->pipe_src_w, + adjusted_mode->crtc_hdisplay); + + *pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT | + bits << PFIT_VERT_SCALE_SHIFT); + *pfit_control |= (PFIT_ENABLE | + VERT_INTERP_BILINEAR | + HORIZ_INTERP_BILINEAR); + } + } else { + /* Aspects match, Let hw scale both directions */ + *pfit_control |= (PFIT_ENABLE | + VERT_AUTO_SCALE | HORIZ_AUTO_SCALE | + VERT_INTERP_BILINEAR | + HORIZ_INTERP_BILINEAR); + } +} + +void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc, + struct intel_crtc_state *pipe_config, + int fitting_mode) +{ + struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev); + u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0; + struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode; + + /* Native modes don't need fitting */ + if (adjusted_mode->crtc_hdisplay == pipe_config->pipe_src_w && + adjusted_mode->crtc_vdisplay == pipe_config->pipe_src_h) + goto out; + + switch (fitting_mode) { + case DRM_MODE_SCALE_CENTER: + /* + * For centered modes, we have to calculate border widths & + * heights and modify the values programmed into the CRTC. + */ + centre_horizontally(adjusted_mode, pipe_config->pipe_src_w); + centre_vertically(adjusted_mode, pipe_config->pipe_src_h); + border = LVDS_BORDER_ENABLE; + break; + case DRM_MODE_SCALE_ASPECT: + /* Scale but preserve the aspect ratio */ + if (INTEL_GEN(dev_priv) >= 4) + i965_scale_aspect(pipe_config, &pfit_control); + else + i9xx_scale_aspect(pipe_config, &pfit_control, + &pfit_pgm_ratios, &border); + break; + case DRM_MODE_SCALE_FULLSCREEN: + /* + * Full scaling, even if it changes the aspect ratio. + * Fortunately this is all done for us in hw. + */ + if (pipe_config->pipe_src_h != adjusted_mode->crtc_vdisplay || + pipe_config->pipe_src_w != adjusted_mode->crtc_hdisplay) { + pfit_control |= PFIT_ENABLE; + if (INTEL_GEN(dev_priv) >= 4) + pfit_control |= PFIT_SCALING_AUTO; + else + pfit_control |= (VERT_AUTO_SCALE | + VERT_INTERP_BILINEAR | + HORIZ_AUTO_SCALE | + HORIZ_INTERP_BILINEAR); + } + break; + default: + WARN(1, "bad panel fit mode: %d\n", fitting_mode); + return; + } + + /* 965+ wants fuzzy fitting */ + /* FIXME: handle multiple panels by failing gracefully */ + if (INTEL_GEN(dev_priv) >= 4) + pfit_control |= ((intel_crtc->pipe << PFIT_PIPE_SHIFT) | + PFIT_FILTER_FUZZY); + +out: + if ((pfit_control & PFIT_ENABLE) == 0) { + pfit_control = 0; + pfit_pgm_ratios = 0; + } + + /* Make sure pre-965 set dither correctly for 18bpp panels. */ + if (INTEL_GEN(dev_priv) < 4 && pipe_config->pipe_bpp == 18) + pfit_control |= PANEL_8TO6_DITHER_ENABLE; + + pipe_config->gmch_pfit.control = pfit_control; + pipe_config->gmch_pfit.pgm_ratios = pfit_pgm_ratios; + pipe_config->gmch_pfit.lvds_border_bits = border; +} + +/** + * scale - scale values from one range to another + * @source_val: value in range [@source_min..@source_max] + * @source_min: minimum legal value for @source_val + * @source_max: maximum legal value for @source_val + * @target_min: corresponding target value for @source_min + * @target_max: corresponding target value for @source_max + * + * Return @source_val in range [@source_min..@source_max] scaled to range + * [@target_min..@target_max]. + */ +static u32 scale(u32 source_val, + u32 source_min, u32 source_max, + u32 target_min, u32 target_max) +{ + u64 target_val; + + WARN_ON(source_min > source_max); + WARN_ON(target_min > target_max); + + /* defensive */ + source_val = clamp(source_val, source_min, source_max); + + /* avoid overflows */ + target_val = mul_u32_u32(source_val - source_min, + target_max - target_min); + target_val = DIV_ROUND_CLOSEST_ULL(target_val, source_max - source_min); + target_val += target_min; + + return target_val; +} + +/* Scale user_level in range [0..user_max] to [hw_min..hw_max]. */ +static inline u32 scale_user_to_hw(struct intel_connector *connector, + u32 user_level, u32 user_max) +{ + struct intel_panel *panel = &connector->panel; + + return scale(user_level, 0, user_max, + panel->backlight.min, panel->backlight.max); +} + +/* Scale user_level in range [0..user_max] to [0..hw_max], clamping the result + * to [hw_min..hw_max]. */ +static inline u32 clamp_user_to_hw(struct intel_connector *connector, + u32 user_level, u32 user_max) +{ + struct intel_panel *panel = &connector->panel; + u32 hw_level; + + hw_level = scale(user_level, 0, user_max, 0, panel->backlight.max); + hw_level = clamp(hw_level, panel->backlight.min, panel->backlight.max); + + return hw_level; +} + +/* Scale hw_level in range [hw_min..hw_max] to [0..user_max]. */ +static inline u32 scale_hw_to_user(struct intel_connector *connector, + u32 hw_level, u32 user_max) +{ + struct intel_panel *panel = &connector->panel; + + return scale(hw_level, panel->backlight.min, panel->backlight.max, + 0, user_max); +} + +static u32 intel_panel_compute_brightness(struct intel_connector *connector, + u32 val) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + + WARN_ON(panel->backlight.max == 0); + + if (i915_modparams.invert_brightness < 0) + return val; + + if (i915_modparams.invert_brightness > 0 || + dev_priv->quirks & QUIRK_INVERT_BRIGHTNESS) { + return panel->backlight.max - val + panel->backlight.min; + } + + return val; +} + +static u32 lpt_get_backlight(struct intel_connector *connector) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + + return I915_READ(BLC_PWM_PCH_CTL2) & BACKLIGHT_DUTY_CYCLE_MASK; +} + +static u32 pch_get_backlight(struct intel_connector *connector) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + + return I915_READ(BLC_PWM_CPU_CTL) & BACKLIGHT_DUTY_CYCLE_MASK; +} + +static u32 i9xx_get_backlight(struct intel_connector *connector) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + u32 val; + + val = I915_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK; + if (INTEL_GEN(dev_priv) < 4) + val >>= 1; + + if (panel->backlight.combination_mode) { + u8 lbpc; + + pci_read_config_byte(dev_priv->drm.pdev, LBPC, &lbpc); + val *= lbpc; + } + + return val; +} + +static u32 _vlv_get_backlight(struct drm_i915_private *dev_priv, enum pipe pipe) +{ + if (WARN_ON(pipe != PIPE_A && pipe != PIPE_B)) + return 0; + + return I915_READ(VLV_BLC_PWM_CTL(pipe)) & BACKLIGHT_DUTY_CYCLE_MASK; +} + +static u32 vlv_get_backlight(struct intel_connector *connector) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + enum pipe pipe = intel_connector_get_pipe(connector); + + return _vlv_get_backlight(dev_priv, pipe); +} + +static u32 bxt_get_backlight(struct intel_connector *connector) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + + return I915_READ(BXT_BLC_PWM_DUTY(panel->backlight.controller)); +} + +static u32 pwm_get_backlight(struct intel_connector *connector) +{ + struct intel_panel *panel = &connector->panel; + int duty_ns; + + duty_ns = pwm_get_duty_cycle(panel->backlight.pwm); + return DIV_ROUND_UP(duty_ns * 100, CRC_PMIC_PWM_PERIOD_NS); +} + +static void lpt_set_backlight(const struct drm_connector_state *conn_state, u32 level) +{ + struct intel_connector *connector = to_intel_connector(conn_state->connector); + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + + u32 val = I915_READ(BLC_PWM_PCH_CTL2) & ~BACKLIGHT_DUTY_CYCLE_MASK; + I915_WRITE(BLC_PWM_PCH_CTL2, val | level); +} + +static void pch_set_backlight(const struct drm_connector_state *conn_state, u32 level) +{ + struct intel_connector *connector = to_intel_connector(conn_state->connector); + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + u32 tmp; + + tmp = I915_READ(BLC_PWM_CPU_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK; + I915_WRITE(BLC_PWM_CPU_CTL, tmp | level); +} + +static void i9xx_set_backlight(const struct drm_connector_state *conn_state, u32 level) +{ + struct intel_connector *connector = to_intel_connector(conn_state->connector); + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + u32 tmp, mask; + + WARN_ON(panel->backlight.max == 0); + + if (panel->backlight.combination_mode) { + u8 lbpc; + + lbpc = level * 0xfe / panel->backlight.max + 1; + level /= lbpc; + pci_write_config_byte(dev_priv->drm.pdev, LBPC, lbpc); + } + + if (IS_GEN(dev_priv, 4)) { + mask = BACKLIGHT_DUTY_CYCLE_MASK; + } else { + level <<= 1; + mask = BACKLIGHT_DUTY_CYCLE_MASK_PNV; + } + + tmp = I915_READ(BLC_PWM_CTL) & ~mask; + I915_WRITE(BLC_PWM_CTL, tmp | level); +} + +static void vlv_set_backlight(const struct drm_connector_state *conn_state, u32 level) +{ + struct intel_connector *connector = to_intel_connector(conn_state->connector); + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + enum pipe pipe = to_intel_crtc(conn_state->crtc)->pipe; + u32 tmp; + + tmp = I915_READ(VLV_BLC_PWM_CTL(pipe)) & ~BACKLIGHT_DUTY_CYCLE_MASK; + I915_WRITE(VLV_BLC_PWM_CTL(pipe), tmp | level); +} + +static void bxt_set_backlight(const struct drm_connector_state *conn_state, u32 level) +{ + struct intel_connector *connector = to_intel_connector(conn_state->connector); + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + + I915_WRITE(BXT_BLC_PWM_DUTY(panel->backlight.controller), level); +} + +static void pwm_set_backlight(const struct drm_connector_state *conn_state, u32 level) +{ + struct intel_panel *panel = &to_intel_connector(conn_state->connector)->panel; + int duty_ns = DIV_ROUND_UP(level * CRC_PMIC_PWM_PERIOD_NS, 100); + + pwm_config(panel->backlight.pwm, duty_ns, CRC_PMIC_PWM_PERIOD_NS); +} + +static void +intel_panel_actually_set_backlight(const struct drm_connector_state *conn_state, u32 level) +{ + struct intel_connector *connector = to_intel_connector(conn_state->connector); + struct intel_panel *panel = &connector->panel; + + DRM_DEBUG_DRIVER("set backlight PWM = %d\n", level); + + level = intel_panel_compute_brightness(connector, level); + panel->backlight.set(conn_state, level); +} + +/* set backlight brightness to level in range [0..max], assuming hw min is + * respected. + */ +void intel_panel_set_backlight_acpi(const struct drm_connector_state *conn_state, + u32 user_level, u32 user_max) +{ + struct intel_connector *connector = to_intel_connector(conn_state->connector); + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + u32 hw_level; + + /* + * Lack of crtc may occur during driver init because + * connection_mutex isn't held across the entire backlight + * setup + modeset readout, and the BIOS can issue the + * requests at any time. + */ + if (!panel->backlight.present || !conn_state->crtc) + return; + + mutex_lock(&dev_priv->backlight_lock); + + WARN_ON(panel->backlight.max == 0); + + hw_level = clamp_user_to_hw(connector, user_level, user_max); + panel->backlight.level = hw_level; + + if (panel->backlight.device) + panel->backlight.device->props.brightness = + scale_hw_to_user(connector, + panel->backlight.level, + panel->backlight.device->props.max_brightness); + + if (panel->backlight.enabled) + intel_panel_actually_set_backlight(conn_state, hw_level); + + mutex_unlock(&dev_priv->backlight_lock); +} + +static void lpt_disable_backlight(const struct drm_connector_state *old_conn_state) +{ + struct intel_connector *connector = to_intel_connector(old_conn_state->connector); + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + u32 tmp; + + intel_panel_actually_set_backlight(old_conn_state, 0); + + /* + * Although we don't support or enable CPU PWM with LPT/SPT based + * systems, it may have been enabled prior to loading the + * driver. Disable to avoid warnings on LCPLL disable. + * + * This needs rework if we need to add support for CPU PWM on PCH split + * platforms. + */ + tmp = I915_READ(BLC_PWM_CPU_CTL2); + if (tmp & BLM_PWM_ENABLE) { + DRM_DEBUG_KMS("cpu backlight was enabled, disabling\n"); + I915_WRITE(BLC_PWM_CPU_CTL2, tmp & ~BLM_PWM_ENABLE); + } + + tmp = I915_READ(BLC_PWM_PCH_CTL1); + I915_WRITE(BLC_PWM_PCH_CTL1, tmp & ~BLM_PCH_PWM_ENABLE); +} + +static void pch_disable_backlight(const struct drm_connector_state *old_conn_state) +{ + struct intel_connector *connector = to_intel_connector(old_conn_state->connector); + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + u32 tmp; + + intel_panel_actually_set_backlight(old_conn_state, 0); + + tmp = I915_READ(BLC_PWM_CPU_CTL2); + I915_WRITE(BLC_PWM_CPU_CTL2, tmp & ~BLM_PWM_ENABLE); + + tmp = I915_READ(BLC_PWM_PCH_CTL1); + I915_WRITE(BLC_PWM_PCH_CTL1, tmp & ~BLM_PCH_PWM_ENABLE); +} + +static void i9xx_disable_backlight(const struct drm_connector_state *old_conn_state) +{ + intel_panel_actually_set_backlight(old_conn_state, 0); +} + +static void i965_disable_backlight(const struct drm_connector_state *old_conn_state) +{ + struct drm_i915_private *dev_priv = to_i915(old_conn_state->connector->dev); + u32 tmp; + + intel_panel_actually_set_backlight(old_conn_state, 0); + + tmp = I915_READ(BLC_PWM_CTL2); + I915_WRITE(BLC_PWM_CTL2, tmp & ~BLM_PWM_ENABLE); +} + +static void vlv_disable_backlight(const struct drm_connector_state *old_conn_state) +{ + struct intel_connector *connector = to_intel_connector(old_conn_state->connector); + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + enum pipe pipe = to_intel_crtc(old_conn_state->crtc)->pipe; + u32 tmp; + + intel_panel_actually_set_backlight(old_conn_state, 0); + + tmp = I915_READ(VLV_BLC_PWM_CTL2(pipe)); + I915_WRITE(VLV_BLC_PWM_CTL2(pipe), tmp & ~BLM_PWM_ENABLE); +} + +static void bxt_disable_backlight(const struct drm_connector_state *old_conn_state) +{ + struct intel_connector *connector = to_intel_connector(old_conn_state->connector); + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + u32 tmp, val; + + intel_panel_actually_set_backlight(old_conn_state, 0); + + tmp = I915_READ(BXT_BLC_PWM_CTL(panel->backlight.controller)); + I915_WRITE(BXT_BLC_PWM_CTL(panel->backlight.controller), + tmp & ~BXT_BLC_PWM_ENABLE); + + if (panel->backlight.controller == 1) { + val = I915_READ(UTIL_PIN_CTL); + val &= ~UTIL_PIN_ENABLE; + I915_WRITE(UTIL_PIN_CTL, val); + } +} + +static void cnp_disable_backlight(const struct drm_connector_state *old_conn_state) +{ + struct intel_connector *connector = to_intel_connector(old_conn_state->connector); + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + u32 tmp; + + intel_panel_actually_set_backlight(old_conn_state, 0); + + tmp = I915_READ(BXT_BLC_PWM_CTL(panel->backlight.controller)); + I915_WRITE(BXT_BLC_PWM_CTL(panel->backlight.controller), + tmp & ~BXT_BLC_PWM_ENABLE); +} + +static void pwm_disable_backlight(const struct drm_connector_state *old_conn_state) +{ + struct intel_connector *connector = to_intel_connector(old_conn_state->connector); + struct intel_panel *panel = &connector->panel; + + /* Disable the backlight */ + intel_panel_actually_set_backlight(old_conn_state, 0); + usleep_range(2000, 3000); + pwm_disable(panel->backlight.pwm); +} + +void intel_panel_disable_backlight(const struct drm_connector_state *old_conn_state) +{ + struct intel_connector *connector = to_intel_connector(old_conn_state->connector); + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + + if (!panel->backlight.present) + return; + + /* + * Do not disable backlight on the vga_switcheroo path. When switching + * away from i915, the other client may depend on i915 to handle the + * backlight. This will leave the backlight on unnecessarily when + * another client is not activated. + */ + if (dev_priv->drm.switch_power_state == DRM_SWITCH_POWER_CHANGING) { + DRM_DEBUG_DRIVER("Skipping backlight disable on vga switch\n"); + return; + } + + mutex_lock(&dev_priv->backlight_lock); + + if (panel->backlight.device) + panel->backlight.device->props.power = FB_BLANK_POWERDOWN; + panel->backlight.enabled = false; + panel->backlight.disable(old_conn_state); + + mutex_unlock(&dev_priv->backlight_lock); +} + +static void lpt_enable_backlight(const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + struct intel_connector *connector = to_intel_connector(conn_state->connector); + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + u32 pch_ctl1, pch_ctl2, schicken; + + pch_ctl1 = I915_READ(BLC_PWM_PCH_CTL1); + if (pch_ctl1 & BLM_PCH_PWM_ENABLE) { + DRM_DEBUG_KMS("pch backlight already enabled\n"); + pch_ctl1 &= ~BLM_PCH_PWM_ENABLE; + I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1); + } + + if (HAS_PCH_LPT(dev_priv)) { + schicken = I915_READ(SOUTH_CHICKEN2); + if (panel->backlight.alternate_pwm_increment) + schicken |= LPT_PWM_GRANULARITY; + else + schicken &= ~LPT_PWM_GRANULARITY; + I915_WRITE(SOUTH_CHICKEN2, schicken); + } else { + schicken = I915_READ(SOUTH_CHICKEN1); + if (panel->backlight.alternate_pwm_increment) + schicken |= SPT_PWM_GRANULARITY; + else + schicken &= ~SPT_PWM_GRANULARITY; + I915_WRITE(SOUTH_CHICKEN1, schicken); + } + + pch_ctl2 = panel->backlight.max << 16; + I915_WRITE(BLC_PWM_PCH_CTL2, pch_ctl2); + + pch_ctl1 = 0; + if (panel->backlight.active_low_pwm) + pch_ctl1 |= BLM_PCH_POLARITY; + + /* After LPT, override is the default. */ + if (HAS_PCH_LPT(dev_priv)) + pch_ctl1 |= BLM_PCH_OVERRIDE_ENABLE; + + I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1); + POSTING_READ(BLC_PWM_PCH_CTL1); + I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1 | BLM_PCH_PWM_ENABLE); + + /* This won't stick until the above enable. */ + intel_panel_actually_set_backlight(conn_state, panel->backlight.level); +} + +static void pch_enable_backlight(const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + struct intel_connector *connector = to_intel_connector(conn_state->connector); + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; + u32 cpu_ctl2, pch_ctl1, pch_ctl2; + + cpu_ctl2 = I915_READ(BLC_PWM_CPU_CTL2); + if (cpu_ctl2 & BLM_PWM_ENABLE) { + DRM_DEBUG_KMS("cpu backlight already enabled\n"); + cpu_ctl2 &= ~BLM_PWM_ENABLE; + I915_WRITE(BLC_PWM_CPU_CTL2, cpu_ctl2); + } + + pch_ctl1 = I915_READ(BLC_PWM_PCH_CTL1); + if (pch_ctl1 & BLM_PCH_PWM_ENABLE) { + DRM_DEBUG_KMS("pch backlight already enabled\n"); + pch_ctl1 &= ~BLM_PCH_PWM_ENABLE; + I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1); + } + + if (cpu_transcoder == TRANSCODER_EDP) + cpu_ctl2 = BLM_TRANSCODER_EDP; + else + cpu_ctl2 = BLM_PIPE(cpu_transcoder); + I915_WRITE(BLC_PWM_CPU_CTL2, cpu_ctl2); + POSTING_READ(BLC_PWM_CPU_CTL2); + I915_WRITE(BLC_PWM_CPU_CTL2, cpu_ctl2 | BLM_PWM_ENABLE); + + /* This won't stick until the above enable. */ + intel_panel_actually_set_backlight(conn_state, panel->backlight.level); + + pch_ctl2 = panel->backlight.max << 16; + I915_WRITE(BLC_PWM_PCH_CTL2, pch_ctl2); + + pch_ctl1 = 0; + if (panel->backlight.active_low_pwm) + pch_ctl1 |= BLM_PCH_POLARITY; + + I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1); + POSTING_READ(BLC_PWM_PCH_CTL1); + I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1 | BLM_PCH_PWM_ENABLE); +} + +static void i9xx_enable_backlight(const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + struct intel_connector *connector = to_intel_connector(conn_state->connector); + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + u32 ctl, freq; + + ctl = I915_READ(BLC_PWM_CTL); + if (ctl & BACKLIGHT_DUTY_CYCLE_MASK_PNV) { + DRM_DEBUG_KMS("backlight already enabled\n"); + I915_WRITE(BLC_PWM_CTL, 0); + } + + freq = panel->backlight.max; + if (panel->backlight.combination_mode) + freq /= 0xff; + + ctl = freq << 17; + if (panel->backlight.combination_mode) + ctl |= BLM_LEGACY_MODE; + if (IS_PINEVIEW(dev_priv) && panel->backlight.active_low_pwm) + ctl |= BLM_POLARITY_PNV; + + I915_WRITE(BLC_PWM_CTL, ctl); + POSTING_READ(BLC_PWM_CTL); + + /* XXX: combine this into above write? */ + intel_panel_actually_set_backlight(conn_state, panel->backlight.level); + + /* + * Needed to enable backlight on some 855gm models. BLC_HIST_CTL is + * 855gm only, but checking for gen2 is safe, as 855gm is the only gen2 + * that has backlight. + */ + if (IS_GEN(dev_priv, 2)) + I915_WRITE(BLC_HIST_CTL, BLM_HISTOGRAM_ENABLE); +} + +static void i965_enable_backlight(const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + struct intel_connector *connector = to_intel_connector(conn_state->connector); + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + enum pipe pipe = to_intel_crtc(conn_state->crtc)->pipe; + u32 ctl, ctl2, freq; + + ctl2 = I915_READ(BLC_PWM_CTL2); + if (ctl2 & BLM_PWM_ENABLE) { + DRM_DEBUG_KMS("backlight already enabled\n"); + ctl2 &= ~BLM_PWM_ENABLE; + I915_WRITE(BLC_PWM_CTL2, ctl2); + } + + freq = panel->backlight.max; + if (panel->backlight.combination_mode) + freq /= 0xff; + + ctl = freq << 16; + I915_WRITE(BLC_PWM_CTL, ctl); + + ctl2 = BLM_PIPE(pipe); + if (panel->backlight.combination_mode) + ctl2 |= BLM_COMBINATION_MODE; + if (panel->backlight.active_low_pwm) + ctl2 |= BLM_POLARITY_I965; + I915_WRITE(BLC_PWM_CTL2, ctl2); + POSTING_READ(BLC_PWM_CTL2); + I915_WRITE(BLC_PWM_CTL2, ctl2 | BLM_PWM_ENABLE); + + intel_panel_actually_set_backlight(conn_state, panel->backlight.level); +} + +static void vlv_enable_backlight(const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + struct intel_connector *connector = to_intel_connector(conn_state->connector); + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + enum pipe pipe = to_intel_crtc(crtc_state->base.crtc)->pipe; + u32 ctl, ctl2; + + ctl2 = I915_READ(VLV_BLC_PWM_CTL2(pipe)); + if (ctl2 & BLM_PWM_ENABLE) { + DRM_DEBUG_KMS("backlight already enabled\n"); + ctl2 &= ~BLM_PWM_ENABLE; + I915_WRITE(VLV_BLC_PWM_CTL2(pipe), ctl2); + } + + ctl = panel->backlight.max << 16; + I915_WRITE(VLV_BLC_PWM_CTL(pipe), ctl); + + /* XXX: combine this into above write? */ + intel_panel_actually_set_backlight(conn_state, panel->backlight.level); + + ctl2 = 0; + if (panel->backlight.active_low_pwm) + ctl2 |= BLM_POLARITY_I965; + I915_WRITE(VLV_BLC_PWM_CTL2(pipe), ctl2); + POSTING_READ(VLV_BLC_PWM_CTL2(pipe)); + I915_WRITE(VLV_BLC_PWM_CTL2(pipe), ctl2 | BLM_PWM_ENABLE); +} + +static void bxt_enable_backlight(const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + struct intel_connector *connector = to_intel_connector(conn_state->connector); + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + enum pipe pipe = to_intel_crtc(crtc_state->base.crtc)->pipe; + u32 pwm_ctl, val; + + /* Controller 1 uses the utility pin. */ + if (panel->backlight.controller == 1) { + val = I915_READ(UTIL_PIN_CTL); + if (val & UTIL_PIN_ENABLE) { + DRM_DEBUG_KMS("util pin already enabled\n"); + val &= ~UTIL_PIN_ENABLE; + I915_WRITE(UTIL_PIN_CTL, val); + } + + val = 0; + if (panel->backlight.util_pin_active_low) + val |= UTIL_PIN_POLARITY; + I915_WRITE(UTIL_PIN_CTL, val | UTIL_PIN_PIPE(pipe) | + UTIL_PIN_MODE_PWM | UTIL_PIN_ENABLE); + } + + pwm_ctl = I915_READ(BXT_BLC_PWM_CTL(panel->backlight.controller)); + if (pwm_ctl & BXT_BLC_PWM_ENABLE) { + DRM_DEBUG_KMS("backlight already enabled\n"); + pwm_ctl &= ~BXT_BLC_PWM_ENABLE; + I915_WRITE(BXT_BLC_PWM_CTL(panel->backlight.controller), + pwm_ctl); + } + + I915_WRITE(BXT_BLC_PWM_FREQ(panel->backlight.controller), + panel->backlight.max); + + intel_panel_actually_set_backlight(conn_state, panel->backlight.level); + + pwm_ctl = 0; + if (panel->backlight.active_low_pwm) + pwm_ctl |= BXT_BLC_PWM_POLARITY; + + I915_WRITE(BXT_BLC_PWM_CTL(panel->backlight.controller), pwm_ctl); + POSTING_READ(BXT_BLC_PWM_CTL(panel->backlight.controller)); + I915_WRITE(BXT_BLC_PWM_CTL(panel->backlight.controller), + pwm_ctl | BXT_BLC_PWM_ENABLE); +} + +static void cnp_enable_backlight(const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + struct intel_connector *connector = to_intel_connector(conn_state->connector); + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + u32 pwm_ctl; + + pwm_ctl = I915_READ(BXT_BLC_PWM_CTL(panel->backlight.controller)); + if (pwm_ctl & BXT_BLC_PWM_ENABLE) { + DRM_DEBUG_KMS("backlight already enabled\n"); + pwm_ctl &= ~BXT_BLC_PWM_ENABLE; + I915_WRITE(BXT_BLC_PWM_CTL(panel->backlight.controller), + pwm_ctl); + } + + I915_WRITE(BXT_BLC_PWM_FREQ(panel->backlight.controller), + panel->backlight.max); + + intel_panel_actually_set_backlight(conn_state, panel->backlight.level); + + pwm_ctl = 0; + if (panel->backlight.active_low_pwm) + pwm_ctl |= BXT_BLC_PWM_POLARITY; + + I915_WRITE(BXT_BLC_PWM_CTL(panel->backlight.controller), pwm_ctl); + POSTING_READ(BXT_BLC_PWM_CTL(panel->backlight.controller)); + I915_WRITE(BXT_BLC_PWM_CTL(panel->backlight.controller), + pwm_ctl | BXT_BLC_PWM_ENABLE); +} + +static void pwm_enable_backlight(const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + struct intel_connector *connector = to_intel_connector(conn_state->connector); + struct intel_panel *panel = &connector->panel; + + pwm_enable(panel->backlight.pwm); + intel_panel_actually_set_backlight(conn_state, panel->backlight.level); +} + +static void __intel_panel_enable_backlight(const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + struct intel_connector *connector = to_intel_connector(conn_state->connector); + struct intel_panel *panel = &connector->panel; + + WARN_ON(panel->backlight.max == 0); + + if (panel->backlight.level <= panel->backlight.min) { + panel->backlight.level = panel->backlight.max; + if (panel->backlight.device) + panel->backlight.device->props.brightness = + scale_hw_to_user(connector, + panel->backlight.level, + panel->backlight.device->props.max_brightness); + } + + panel->backlight.enable(crtc_state, conn_state); + panel->backlight.enabled = true; + if (panel->backlight.device) + panel->backlight.device->props.power = FB_BLANK_UNBLANK; +} + +void intel_panel_enable_backlight(const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + struct intel_connector *connector = to_intel_connector(conn_state->connector); + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + enum pipe pipe = to_intel_crtc(crtc_state->base.crtc)->pipe; + + if (!panel->backlight.present) + return; + + DRM_DEBUG_KMS("pipe %c\n", pipe_name(pipe)); + + mutex_lock(&dev_priv->backlight_lock); + + __intel_panel_enable_backlight(crtc_state, conn_state); + + mutex_unlock(&dev_priv->backlight_lock); +} + +#if IS_ENABLED(CONFIG_BACKLIGHT_CLASS_DEVICE) +static u32 intel_panel_get_backlight(struct intel_connector *connector) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + u32 val = 0; + + mutex_lock(&dev_priv->backlight_lock); + + if (panel->backlight.enabled) { + val = panel->backlight.get(connector); + val = intel_panel_compute_brightness(connector, val); + } + + mutex_unlock(&dev_priv->backlight_lock); + + DRM_DEBUG_DRIVER("get backlight PWM = %d\n", val); + return val; +} + +/* set backlight brightness to level in range [0..max], scaling wrt hw min */ +static void intel_panel_set_backlight(const struct drm_connector_state *conn_state, + u32 user_level, u32 user_max) +{ + struct intel_connector *connector = to_intel_connector(conn_state->connector); + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + u32 hw_level; + + if (!panel->backlight.present) + return; + + mutex_lock(&dev_priv->backlight_lock); + + WARN_ON(panel->backlight.max == 0); + + hw_level = scale_user_to_hw(connector, user_level, user_max); + panel->backlight.level = hw_level; + + if (panel->backlight.enabled) + intel_panel_actually_set_backlight(conn_state, hw_level); + + mutex_unlock(&dev_priv->backlight_lock); +} + +static int intel_backlight_device_update_status(struct backlight_device *bd) +{ + struct intel_connector *connector = bl_get_data(bd); + struct intel_panel *panel = &connector->panel; + struct drm_device *dev = connector->base.dev; + + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); + DRM_DEBUG_KMS("updating intel_backlight, brightness=%d/%d\n", + bd->props.brightness, bd->props.max_brightness); + intel_panel_set_backlight(connector->base.state, bd->props.brightness, + bd->props.max_brightness); + + /* + * Allow flipping bl_power as a sub-state of enabled. Sadly the + * backlight class device does not make it easy to to differentiate + * between callbacks for brightness and bl_power, so our backlight_power + * callback needs to take this into account. + */ + if (panel->backlight.enabled) { + if (panel->backlight.power) { + bool enable = bd->props.power == FB_BLANK_UNBLANK && + bd->props.brightness != 0; + panel->backlight.power(connector, enable); + } + } else { + bd->props.power = FB_BLANK_POWERDOWN; + } + + drm_modeset_unlock(&dev->mode_config.connection_mutex); + return 0; +} + +static int intel_backlight_device_get_brightness(struct backlight_device *bd) +{ + struct intel_connector *connector = bl_get_data(bd); + struct drm_device *dev = connector->base.dev; + struct drm_i915_private *dev_priv = to_i915(dev); + intel_wakeref_t wakeref; + int ret = 0; + + with_intel_runtime_pm(&dev_priv->runtime_pm, wakeref) { + u32 hw_level; + + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); + + hw_level = intel_panel_get_backlight(connector); + ret = scale_hw_to_user(connector, + hw_level, bd->props.max_brightness); + + drm_modeset_unlock(&dev->mode_config.connection_mutex); + } + + return ret; +} + +static const struct backlight_ops intel_backlight_device_ops = { + .update_status = intel_backlight_device_update_status, + .get_brightness = intel_backlight_device_get_brightness, +}; + +int intel_backlight_device_register(struct intel_connector *connector) +{ + struct intel_panel *panel = &connector->panel; + struct backlight_properties props; + + if (WARN_ON(panel->backlight.device)) + return -ENODEV; + + if (!panel->backlight.present) + return 0; + + WARN_ON(panel->backlight.max == 0); + + memset(&props, 0, sizeof(props)); + props.type = BACKLIGHT_RAW; + + /* + * Note: Everything should work even if the backlight device max + * presented to the userspace is arbitrarily chosen. + */ + props.max_brightness = panel->backlight.max; + props.brightness = scale_hw_to_user(connector, + panel->backlight.level, + props.max_brightness); + + if (panel->backlight.enabled) + props.power = FB_BLANK_UNBLANK; + else + props.power = FB_BLANK_POWERDOWN; + + /* + * Note: using the same name independent of the connector prevents + * registration of multiple backlight devices in the driver. + */ + panel->backlight.device = + backlight_device_register("intel_backlight", + connector->base.kdev, + connector, + &intel_backlight_device_ops, &props); + + if (IS_ERR(panel->backlight.device)) { + DRM_ERROR("Failed to register backlight: %ld\n", + PTR_ERR(panel->backlight.device)); + panel->backlight.device = NULL; + return -ENODEV; + } + + DRM_DEBUG_KMS("Connector %s backlight sysfs interface registered\n", + connector->base.name); + + return 0; +} + +void intel_backlight_device_unregister(struct intel_connector *connector) +{ + struct intel_panel *panel = &connector->panel; + + if (panel->backlight.device) { + backlight_device_unregister(panel->backlight.device); + panel->backlight.device = NULL; + } +} +#endif /* CONFIG_BACKLIGHT_CLASS_DEVICE */ + +/* + * CNP: PWM clock frequency is 19.2 MHz or 24 MHz. + * PWM increment = 1 + */ +static u32 cnp_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + + return DIV_ROUND_CLOSEST(KHz(dev_priv->rawclk_freq), pwm_freq_hz); +} + +/* + * BXT: PWM clock frequency = 19.2 MHz. + */ +static u32 bxt_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz) +{ + return DIV_ROUND_CLOSEST(KHz(19200), pwm_freq_hz); +} + +/* + * SPT: This value represents the period of the PWM stream in clock periods + * multiplied by 16 (default increment) or 128 (alternate increment selected in + * SCHICKEN_1 bit 0). PWM clock is 24 MHz. + */ +static u32 spt_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz) +{ + struct intel_panel *panel = &connector->panel; + u32 mul; + + if (panel->backlight.alternate_pwm_increment) + mul = 128; + else + mul = 16; + + return DIV_ROUND_CLOSEST(MHz(24), pwm_freq_hz * mul); +} + +/* + * LPT: This value represents the period of the PWM stream in clock periods + * multiplied by 128 (default increment) or 16 (alternate increment, selected in + * LPT SOUTH_CHICKEN2 register bit 5). + */ +static u32 lpt_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + u32 mul, clock; + + if (panel->backlight.alternate_pwm_increment) + mul = 16; + else + mul = 128; + + if (HAS_PCH_LPT_H(dev_priv)) + clock = MHz(135); /* LPT:H */ + else + clock = MHz(24); /* LPT:LP */ + + return DIV_ROUND_CLOSEST(clock, pwm_freq_hz * mul); +} + +/* + * ILK/SNB/IVB: This value represents the period of the PWM stream in PCH + * display raw clocks multiplied by 128. + */ +static u32 pch_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + + return DIV_ROUND_CLOSEST(KHz(dev_priv->rawclk_freq), pwm_freq_hz * 128); +} + +/* + * Gen2: This field determines the number of time base events (display core + * clock frequency/32) in total for a complete cycle of modulated backlight + * control. + * + * Gen3: A time base event equals the display core clock ([DevPNV] HRAW clock) + * divided by 32. + */ +static u32 i9xx_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + int clock; + + if (IS_PINEVIEW(dev_priv)) + clock = KHz(dev_priv->rawclk_freq); + else + clock = KHz(dev_priv->cdclk.hw.cdclk); + + return DIV_ROUND_CLOSEST(clock, pwm_freq_hz * 32); +} + +/* + * Gen4: This value represents the period of the PWM stream in display core + * clocks ([DevCTG] HRAW clocks) multiplied by 128. + * + */ +static u32 i965_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + int clock; + + if (IS_G4X(dev_priv)) + clock = KHz(dev_priv->rawclk_freq); + else + clock = KHz(dev_priv->cdclk.hw.cdclk); + + return DIV_ROUND_CLOSEST(clock, pwm_freq_hz * 128); +} + +/* + * VLV: This value represents the period of the PWM stream in display core + * clocks ([DevCTG] 200MHz HRAW clocks) multiplied by 128 or 25MHz S0IX clocks + * multiplied by 16. CHV uses a 19.2MHz S0IX clock. + */ +static u32 vlv_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + int mul, clock; + + if ((I915_READ(CBR1_VLV) & CBR_PWM_CLOCK_MUX_SELECT) == 0) { + if (IS_CHERRYVIEW(dev_priv)) + clock = KHz(19200); + else + clock = MHz(25); + mul = 16; + } else { + clock = KHz(dev_priv->rawclk_freq); + mul = 128; + } + + return DIV_ROUND_CLOSEST(clock, pwm_freq_hz * mul); +} + +static u32 get_backlight_max_vbt(struct intel_connector *connector) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + u16 pwm_freq_hz = dev_priv->vbt.backlight.pwm_freq_hz; + u32 pwm; + + if (!panel->backlight.hz_to_pwm) { + DRM_DEBUG_KMS("backlight frequency conversion not supported\n"); + return 0; + } + + if (pwm_freq_hz) { + DRM_DEBUG_KMS("VBT defined backlight frequency %u Hz\n", + pwm_freq_hz); + } else { + pwm_freq_hz = 200; + DRM_DEBUG_KMS("default backlight frequency %u Hz\n", + pwm_freq_hz); + } + + pwm = panel->backlight.hz_to_pwm(connector, pwm_freq_hz); + if (!pwm) { + DRM_DEBUG_KMS("backlight frequency conversion failed\n"); + return 0; + } + + return pwm; +} + +/* + * Note: The setup hooks can't assume pipe is set! + */ +static u32 get_backlight_min_vbt(struct intel_connector *connector) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + int min; + + WARN_ON(panel->backlight.max == 0); + + /* + * XXX: If the vbt value is 255, it makes min equal to max, which leads + * to problems. There are such machines out there. Either our + * interpretation is wrong or the vbt has bogus data. Or both. Safeguard + * against this by letting the minimum be at most (arbitrarily chosen) + * 25% of the max. + */ + min = clamp_t(int, dev_priv->vbt.backlight.min_brightness, 0, 64); + if (min != dev_priv->vbt.backlight.min_brightness) { + DRM_DEBUG_KMS("clamping VBT min backlight %d/255 to %d/255\n", + dev_priv->vbt.backlight.min_brightness, min); + } + + /* vbt value is a coefficient in range [0..255] */ + return scale(min, 0, 255, 0, panel->backlight.max); +} + +static int lpt_setup_backlight(struct intel_connector *connector, enum pipe unused) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + u32 cpu_ctl2, pch_ctl1, pch_ctl2, val; + bool alt, cpu_mode; + + if (HAS_PCH_LPT(dev_priv)) + alt = I915_READ(SOUTH_CHICKEN2) & LPT_PWM_GRANULARITY; + else + alt = I915_READ(SOUTH_CHICKEN1) & SPT_PWM_GRANULARITY; + panel->backlight.alternate_pwm_increment = alt; + + pch_ctl1 = I915_READ(BLC_PWM_PCH_CTL1); + panel->backlight.active_low_pwm = pch_ctl1 & BLM_PCH_POLARITY; + + pch_ctl2 = I915_READ(BLC_PWM_PCH_CTL2); + panel->backlight.max = pch_ctl2 >> 16; + + cpu_ctl2 = I915_READ(BLC_PWM_CPU_CTL2); + + if (!panel->backlight.max) + panel->backlight.max = get_backlight_max_vbt(connector); + + if (!panel->backlight.max) + return -ENODEV; + + panel->backlight.min = get_backlight_min_vbt(connector); + + panel->backlight.enabled = pch_ctl1 & BLM_PCH_PWM_ENABLE; + + cpu_mode = panel->backlight.enabled && HAS_PCH_LPT(dev_priv) && + !(pch_ctl1 & BLM_PCH_OVERRIDE_ENABLE) && + (cpu_ctl2 & BLM_PWM_ENABLE); + if (cpu_mode) + val = pch_get_backlight(connector); + else + val = lpt_get_backlight(connector); + val = intel_panel_compute_brightness(connector, val); + panel->backlight.level = clamp(val, panel->backlight.min, + panel->backlight.max); + + if (cpu_mode) { + DRM_DEBUG_KMS("CPU backlight register was enabled, switching to PCH override\n"); + + /* Write converted CPU PWM value to PCH override register */ + lpt_set_backlight(connector->base.state, panel->backlight.level); + I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1 | BLM_PCH_OVERRIDE_ENABLE); + + I915_WRITE(BLC_PWM_CPU_CTL2, cpu_ctl2 & ~BLM_PWM_ENABLE); + } + + return 0; +} + +static int pch_setup_backlight(struct intel_connector *connector, enum pipe unused) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + u32 cpu_ctl2, pch_ctl1, pch_ctl2, val; + + pch_ctl1 = I915_READ(BLC_PWM_PCH_CTL1); + panel->backlight.active_low_pwm = pch_ctl1 & BLM_PCH_POLARITY; + + pch_ctl2 = I915_READ(BLC_PWM_PCH_CTL2); + panel->backlight.max = pch_ctl2 >> 16; + + if (!panel->backlight.max) + panel->backlight.max = get_backlight_max_vbt(connector); + + if (!panel->backlight.max) + return -ENODEV; + + panel->backlight.min = get_backlight_min_vbt(connector); + + val = pch_get_backlight(connector); + val = intel_panel_compute_brightness(connector, val); + panel->backlight.level = clamp(val, panel->backlight.min, + panel->backlight.max); + + cpu_ctl2 = I915_READ(BLC_PWM_CPU_CTL2); + panel->backlight.enabled = (cpu_ctl2 & BLM_PWM_ENABLE) && + (pch_ctl1 & BLM_PCH_PWM_ENABLE); + + return 0; +} + +static int i9xx_setup_backlight(struct intel_connector *connector, enum pipe unused) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + u32 ctl, val; + + ctl = I915_READ(BLC_PWM_CTL); + + if (IS_GEN(dev_priv, 2) || IS_I915GM(dev_priv) || IS_I945GM(dev_priv)) + panel->backlight.combination_mode = ctl & BLM_LEGACY_MODE; + + if (IS_PINEVIEW(dev_priv)) + panel->backlight.active_low_pwm = ctl & BLM_POLARITY_PNV; + + panel->backlight.max = ctl >> 17; + + if (!panel->backlight.max) { + panel->backlight.max = get_backlight_max_vbt(connector); + panel->backlight.max >>= 1; + } + + if (!panel->backlight.max) + return -ENODEV; + + if (panel->backlight.combination_mode) + panel->backlight.max *= 0xff; + + panel->backlight.min = get_backlight_min_vbt(connector); + + val = i9xx_get_backlight(connector); + val = intel_panel_compute_brightness(connector, val); + panel->backlight.level = clamp(val, panel->backlight.min, + panel->backlight.max); + + panel->backlight.enabled = val != 0; + + return 0; +} + +static int i965_setup_backlight(struct intel_connector *connector, enum pipe unused) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + u32 ctl, ctl2, val; + + ctl2 = I915_READ(BLC_PWM_CTL2); + panel->backlight.combination_mode = ctl2 & BLM_COMBINATION_MODE; + panel->backlight.active_low_pwm = ctl2 & BLM_POLARITY_I965; + + ctl = I915_READ(BLC_PWM_CTL); + panel->backlight.max = ctl >> 16; + + if (!panel->backlight.max) + panel->backlight.max = get_backlight_max_vbt(connector); + + if (!panel->backlight.max) + return -ENODEV; + + if (panel->backlight.combination_mode) + panel->backlight.max *= 0xff; + + panel->backlight.min = get_backlight_min_vbt(connector); + + val = i9xx_get_backlight(connector); + val = intel_panel_compute_brightness(connector, val); + panel->backlight.level = clamp(val, panel->backlight.min, + panel->backlight.max); + + panel->backlight.enabled = ctl2 & BLM_PWM_ENABLE; + + return 0; +} + +static int vlv_setup_backlight(struct intel_connector *connector, enum pipe pipe) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + u32 ctl, ctl2, val; + + if (WARN_ON(pipe != PIPE_A && pipe != PIPE_B)) + return -ENODEV; + + ctl2 = I915_READ(VLV_BLC_PWM_CTL2(pipe)); + panel->backlight.active_low_pwm = ctl2 & BLM_POLARITY_I965; + + ctl = I915_READ(VLV_BLC_PWM_CTL(pipe)); + panel->backlight.max = ctl >> 16; + + if (!panel->backlight.max) + panel->backlight.max = get_backlight_max_vbt(connector); + + if (!panel->backlight.max) + return -ENODEV; + + panel->backlight.min = get_backlight_min_vbt(connector); + + val = _vlv_get_backlight(dev_priv, pipe); + val = intel_panel_compute_brightness(connector, val); + panel->backlight.level = clamp(val, panel->backlight.min, + panel->backlight.max); + + panel->backlight.enabled = ctl2 & BLM_PWM_ENABLE; + + return 0; +} + +static int +bxt_setup_backlight(struct intel_connector *connector, enum pipe unused) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + u32 pwm_ctl, val; + + panel->backlight.controller = dev_priv->vbt.backlight.controller; + + pwm_ctl = I915_READ(BXT_BLC_PWM_CTL(panel->backlight.controller)); + + /* Controller 1 uses the utility pin. */ + if (panel->backlight.controller == 1) { + val = I915_READ(UTIL_PIN_CTL); + panel->backlight.util_pin_active_low = + val & UTIL_PIN_POLARITY; + } + + panel->backlight.active_low_pwm = pwm_ctl & BXT_BLC_PWM_POLARITY; + panel->backlight.max = + I915_READ(BXT_BLC_PWM_FREQ(panel->backlight.controller)); + + if (!panel->backlight.max) + panel->backlight.max = get_backlight_max_vbt(connector); + + if (!panel->backlight.max) + return -ENODEV; + + panel->backlight.min = get_backlight_min_vbt(connector); + + val = bxt_get_backlight(connector); + val = intel_panel_compute_brightness(connector, val); + panel->backlight.level = clamp(val, panel->backlight.min, + panel->backlight.max); + + panel->backlight.enabled = pwm_ctl & BXT_BLC_PWM_ENABLE; + + return 0; +} + +static int +cnp_setup_backlight(struct intel_connector *connector, enum pipe unused) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + u32 pwm_ctl, val; + + /* + * CNP has the BXT implementation of backlight, but with only one + * controller. TODO: ICP has multiple controllers but we only use + * controller 0 for now. + */ + panel->backlight.controller = 0; + + pwm_ctl = I915_READ(BXT_BLC_PWM_CTL(panel->backlight.controller)); + + panel->backlight.active_low_pwm = pwm_ctl & BXT_BLC_PWM_POLARITY; + panel->backlight.max = + I915_READ(BXT_BLC_PWM_FREQ(panel->backlight.controller)); + + if (!panel->backlight.max) + panel->backlight.max = get_backlight_max_vbt(connector); + + if (!panel->backlight.max) + return -ENODEV; + + panel->backlight.min = get_backlight_min_vbt(connector); + + val = bxt_get_backlight(connector); + val = intel_panel_compute_brightness(connector, val); + panel->backlight.level = clamp(val, panel->backlight.min, + panel->backlight.max); + + panel->backlight.enabled = pwm_ctl & BXT_BLC_PWM_ENABLE; + + return 0; +} + +static int pwm_setup_backlight(struct intel_connector *connector, + enum pipe pipe) +{ + struct drm_device *dev = connector->base.dev; + struct intel_panel *panel = &connector->panel; + int retval; + + /* Get the PWM chip for backlight control */ + panel->backlight.pwm = pwm_get(dev->dev, "pwm_backlight"); + if (IS_ERR(panel->backlight.pwm)) { + DRM_ERROR("Failed to own the pwm chip\n"); + panel->backlight.pwm = NULL; + return -ENODEV; + } + + /* + * FIXME: pwm_apply_args() should be removed when switching to + * the atomic PWM API. + */ + pwm_apply_args(panel->backlight.pwm); + + retval = pwm_config(panel->backlight.pwm, CRC_PMIC_PWM_PERIOD_NS, + CRC_PMIC_PWM_PERIOD_NS); + if (retval < 0) { + DRM_ERROR("Failed to configure the pwm chip\n"); + pwm_put(panel->backlight.pwm); + panel->backlight.pwm = NULL; + return retval; + } + + panel->backlight.min = 0; /* 0% */ + panel->backlight.max = 100; /* 100% */ + panel->backlight.level = DIV_ROUND_UP( + pwm_get_duty_cycle(panel->backlight.pwm) * 100, + CRC_PMIC_PWM_PERIOD_NS); + panel->backlight.enabled = panel->backlight.level != 0; + + return 0; +} + +void intel_panel_update_backlight(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + struct intel_connector *connector = to_intel_connector(conn_state->connector); + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_panel *panel = &connector->panel; + + if (!panel->backlight.present) + return; + + mutex_lock(&dev_priv->backlight_lock); + if (!panel->backlight.enabled) + __intel_panel_enable_backlight(crtc_state, conn_state); + + mutex_unlock(&dev_priv->backlight_lock); +} + +int intel_panel_setup_backlight(struct drm_connector *connector, enum pipe pipe) +{ + struct drm_i915_private *dev_priv = to_i915(connector->dev); + struct intel_connector *intel_connector = to_intel_connector(connector); + struct intel_panel *panel = &intel_connector->panel; + int ret; + + if (!dev_priv->vbt.backlight.present) { + if (dev_priv->quirks & QUIRK_BACKLIGHT_PRESENT) { + DRM_DEBUG_KMS("no backlight present per VBT, but present per quirk\n"); + } else { + DRM_DEBUG_KMS("no backlight present per VBT\n"); + return 0; + } + } + + /* ensure intel_panel has been initialized first */ + if (WARN_ON(!panel->backlight.setup)) + return -ENODEV; + + /* set level and max in panel struct */ + mutex_lock(&dev_priv->backlight_lock); + ret = panel->backlight.setup(intel_connector, pipe); + mutex_unlock(&dev_priv->backlight_lock); + + if (ret) { + DRM_DEBUG_KMS("failed to setup backlight for connector %s\n", + connector->name); + return ret; + } + + panel->backlight.present = true; + + DRM_DEBUG_KMS("Connector %s backlight initialized, %s, brightness %u/%u\n", + connector->name, + enableddisabled(panel->backlight.enabled), + panel->backlight.level, panel->backlight.max); + + return 0; +} + +static void intel_panel_destroy_backlight(struct intel_panel *panel) +{ + /* dispose of the pwm */ + if (panel->backlight.pwm) + pwm_put(panel->backlight.pwm); + + panel->backlight.present = false; +} + +/* Set up chip specific backlight functions */ +static void +intel_panel_init_backlight_funcs(struct intel_panel *panel) +{ + struct intel_connector *connector = + container_of(panel, struct intel_connector, panel); + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + + if (connector->base.connector_type == DRM_MODE_CONNECTOR_eDP && + intel_dp_aux_init_backlight_funcs(connector) == 0) + return; + + if (connector->base.connector_type == DRM_MODE_CONNECTOR_DSI && + intel_dsi_dcs_init_backlight_funcs(connector) == 0) + return; + + if (IS_GEN9_LP(dev_priv)) { + panel->backlight.setup = bxt_setup_backlight; + panel->backlight.enable = bxt_enable_backlight; + panel->backlight.disable = bxt_disable_backlight; + panel->backlight.set = bxt_set_backlight; + panel->backlight.get = bxt_get_backlight; + panel->backlight.hz_to_pwm = bxt_hz_to_pwm; + } else if (INTEL_PCH_TYPE(dev_priv) >= PCH_CNP) { + panel->backlight.setup = cnp_setup_backlight; + panel->backlight.enable = cnp_enable_backlight; + panel->backlight.disable = cnp_disable_backlight; + panel->backlight.set = bxt_set_backlight; + panel->backlight.get = bxt_get_backlight; + panel->backlight.hz_to_pwm = cnp_hz_to_pwm; + } else if (INTEL_PCH_TYPE(dev_priv) >= PCH_LPT) { + panel->backlight.setup = lpt_setup_backlight; + panel->backlight.enable = lpt_enable_backlight; + panel->backlight.disable = lpt_disable_backlight; + panel->backlight.set = lpt_set_backlight; + panel->backlight.get = lpt_get_backlight; + if (HAS_PCH_LPT(dev_priv)) + panel->backlight.hz_to_pwm = lpt_hz_to_pwm; + else + panel->backlight.hz_to_pwm = spt_hz_to_pwm; + } else if (HAS_PCH_SPLIT(dev_priv)) { + panel->backlight.setup = pch_setup_backlight; + panel->backlight.enable = pch_enable_backlight; + panel->backlight.disable = pch_disable_backlight; + panel->backlight.set = pch_set_backlight; + panel->backlight.get = pch_get_backlight; + panel->backlight.hz_to_pwm = pch_hz_to_pwm; + } else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { + if (connector->base.connector_type == DRM_MODE_CONNECTOR_DSI) { + panel->backlight.setup = pwm_setup_backlight; + panel->backlight.enable = pwm_enable_backlight; + panel->backlight.disable = pwm_disable_backlight; + panel->backlight.set = pwm_set_backlight; + panel->backlight.get = pwm_get_backlight; + } else { + panel->backlight.setup = vlv_setup_backlight; + panel->backlight.enable = vlv_enable_backlight; + panel->backlight.disable = vlv_disable_backlight; + panel->backlight.set = vlv_set_backlight; + panel->backlight.get = vlv_get_backlight; + panel->backlight.hz_to_pwm = vlv_hz_to_pwm; + } + } else if (IS_GEN(dev_priv, 4)) { + panel->backlight.setup = i965_setup_backlight; + panel->backlight.enable = i965_enable_backlight; + panel->backlight.disable = i965_disable_backlight; + panel->backlight.set = i9xx_set_backlight; + panel->backlight.get = i9xx_get_backlight; + panel->backlight.hz_to_pwm = i965_hz_to_pwm; + } else { + panel->backlight.setup = i9xx_setup_backlight; + panel->backlight.enable = i9xx_enable_backlight; + panel->backlight.disable = i9xx_disable_backlight; + panel->backlight.set = i9xx_set_backlight; + panel->backlight.get = i9xx_get_backlight; + panel->backlight.hz_to_pwm = i9xx_hz_to_pwm; + } +} + +int intel_panel_init(struct intel_panel *panel, + struct drm_display_mode *fixed_mode, + struct drm_display_mode *downclock_mode) +{ + intel_panel_init_backlight_funcs(panel); + + panel->fixed_mode = fixed_mode; + panel->downclock_mode = downclock_mode; + + return 0; +} + +void intel_panel_fini(struct intel_panel *panel) +{ + struct intel_connector *intel_connector = + container_of(panel, struct intel_connector, panel); + + intel_panel_destroy_backlight(panel); + + if (panel->fixed_mode) + drm_mode_destroy(intel_connector->base.dev, panel->fixed_mode); + + if (panel->downclock_mode) + drm_mode_destroy(intel_connector->base.dev, + panel->downclock_mode); +} |