summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i2c/tda998x_drv.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/i2c/tda998x_drv.c')
-rw-r--r--drivers/gpu/drm/i2c/tda998x_drv.c450
1 files changed, 302 insertions, 148 deletions
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index 7fcef5125d16..61e042918a7f 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -24,9 +24,26 @@
#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
-struct tda998x_audio_port {
- u8 format; /* AFMT_xxx */
- u8 config; /* AP value */
+enum {
+ AUDIO_ROUTE_I2S,
+ AUDIO_ROUTE_SPDIF,
+ AUDIO_ROUTE_NUM
+};
+
+struct tda998x_audio_route {
+ u8 ena_aclk;
+ u8 mux_ap;
+ u8 aip_clksel;
+};
+
+struct tda998x_audio_settings {
+ const struct tda998x_audio_route *route;
+ struct hdmi_audio_infoframe cea;
+ unsigned int sample_rate;
+ u8 status[5];
+ u8 ena_ap;
+ u8 i2s_format;
+ u8 cts_n;
};
struct tda998x_priv {
@@ -39,11 +56,12 @@ struct tda998x_priv {
bool is_on;
bool supports_infoframes;
bool sink_has_audio;
+ enum hdmi_quantization_range rgb_quant_range;
u8 vip_cntrl_0;
u8 vip_cntrl_1;
u8 vip_cntrl_2;
unsigned long tmds_clock;
- struct tda998x_audio_params audio_params;
+ struct tda998x_audio_settings audio;
struct platform_device *audio_pdev;
struct mutex audio_mutex;
@@ -61,7 +79,7 @@ struct tda998x_priv {
struct drm_bridge bridge;
struct drm_connector connector;
- struct tda998x_audio_port audio_port[2];
+ u8 audio_port_enable[AUDIO_ROUTE_NUM];
struct tda9950_glue cec_glue;
struct gpio_desc *calib;
struct cec_notifier *cec_notify;
@@ -230,8 +248,11 @@ struct tda998x_priv {
# define HVF_CNTRL_1_PAD(x) (((x) & 3) << 4)
# define HVF_CNTRL_1_SEMI_PLANAR (1 << 6)
#define REG_RPT_CNTRL REG(0x00, 0xf0) /* write */
+# define RPT_CNTRL_REPEAT(x) ((x) & 15)
#define REG_I2S_FORMAT REG(0x00, 0xfc) /* read/write */
-# define I2S_FORMAT(x) (((x) & 3) << 0)
+# define I2S_FORMAT_PHILIPS (0 << 0)
+# define I2S_FORMAT_LEFT_J (2 << 0)
+# define I2S_FORMAT_RIGHT_J (3 << 0)
#define REG_AIP_CLKSEL REG(0x00, 0xfd) /* write */
# define AIP_CLKSEL_AIP_SPDIF (0 << 3)
# define AIP_CLKSEL_AIP_I2S (1 << 3)
@@ -821,16 +842,14 @@ tda998x_write_if(struct tda998x_priv *priv, u8 bit, u16 addr,
reg_set(priv, REG_DIP_IF_FLAGS, bit);
}
-static int tda998x_write_aif(struct tda998x_priv *priv,
- struct hdmi_audio_infoframe *cea)
+static void tda998x_write_aif(struct tda998x_priv *priv,
+ const struct hdmi_audio_infoframe *cea)
{
union hdmi_infoframe frame;
frame.audio = *cea;
tda998x_write_if(priv, DIP_IF_FLAGS_IF4, REG_IF4_HB0, &frame);
-
- return 0;
}
static void
@@ -841,12 +860,133 @@ tda998x_write_avi(struct tda998x_priv *priv, const struct drm_display_mode *mode
drm_hdmi_avi_infoframe_from_display_mode(&frame.avi,
&priv->connector, mode);
frame.avi.quantization_range = HDMI_QUANTIZATION_RANGE_FULL;
+ drm_hdmi_avi_infoframe_quant_range(&frame.avi, &priv->connector, mode,
+ priv->rgb_quant_range);
tda998x_write_if(priv, DIP_IF_FLAGS_IF2, REG_IF2_HB0, &frame);
}
+static void tda998x_write_vsi(struct tda998x_priv *priv,
+ const struct drm_display_mode *mode)
+{
+ union hdmi_infoframe frame;
+
+ if (drm_hdmi_vendor_infoframe_from_display_mode(&frame.vendor.hdmi,
+ &priv->connector,
+ mode))
+ reg_clear(priv, REG_DIP_IF_FLAGS, DIP_IF_FLAGS_IF1);
+ else
+ tda998x_write_if(priv, DIP_IF_FLAGS_IF1, REG_IF1_HB0, &frame);
+}
+
/* Audio support */
+static const struct tda998x_audio_route tda998x_audio_route[AUDIO_ROUTE_NUM] = {
+ [AUDIO_ROUTE_I2S] = {
+ .ena_aclk = 1,
+ .mux_ap = MUX_AP_SELECT_I2S,
+ .aip_clksel = AIP_CLKSEL_AIP_I2S | AIP_CLKSEL_FS_ACLK,
+ },
+ [AUDIO_ROUTE_SPDIF] = {
+ .ena_aclk = 0,
+ .mux_ap = MUX_AP_SELECT_SPDIF,
+ .aip_clksel = AIP_CLKSEL_AIP_SPDIF | AIP_CLKSEL_FS_FS64SPDIF,
+ },
+};
+
+/* Configure the TDA998x audio data and clock routing. */
+static int tda998x_derive_routing(struct tda998x_priv *priv,
+ struct tda998x_audio_settings *s,
+ unsigned int route)
+{
+ s->route = &tda998x_audio_route[route];
+ s->ena_ap = priv->audio_port_enable[route];
+ if (s->ena_ap == 0) {
+ dev_err(&priv->hdmi->dev, "no audio configuration found\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * The audio clock divisor register controls a divider producing Audio_Clk_Out
+ * from SERclk by dividing it by 2^n where 0 <= n <= 5. We don't know what
+ * Audio_Clk_Out or SERclk are. We guess SERclk is the same as TMDS clock.
+ *
+ * It seems that Audio_Clk_Out must be the smallest value that is greater
+ * than 128*fs, otherwise audio does not function. There is some suggestion
+ * that 126*fs is a better value.
+ */
+static u8 tda998x_get_adiv(struct tda998x_priv *priv, unsigned int fs)
+{
+ unsigned long min_audio_clk = fs * 128;
+ unsigned long ser_clk = priv->tmds_clock * 1000;
+ u8 adiv;
+
+ for (adiv = AUDIO_DIV_SERCLK_32; adiv != AUDIO_DIV_SERCLK_1; adiv--)
+ if (ser_clk > min_audio_clk << adiv)
+ break;
+
+ dev_dbg(&priv->hdmi->dev,
+ "ser_clk=%luHz fs=%uHz min_aclk=%luHz adiv=%d\n",
+ ser_clk, fs, min_audio_clk, adiv);
+
+ return adiv;
+}
+
+/*
+ * In auto-CTS mode, the TDA998x uses a "measured time stamp" counter to
+ * generate the CTS value. It appears that the "measured time stamp" is
+ * the number of TDMS clock cycles within a number of audio input clock
+ * cycles defined by the k and N parameters defined below, in a similar
+ * way to that which is set out in the CTS generation in the HDMI spec.
+ *
+ * tmdsclk ----> mts -> /m ---> CTS
+ * ^
+ * sclk -> /k -> /N
+ *
+ * CTS = mts / m, where m is 2^M.
+ * /k is a divider based on the K value below, K+1 for K < 4, or 8 for K >= 4
+ * /N is a divider based on the HDMI specified N value.
+ *
+ * This produces the following equation:
+ * CTS = tmds_clock * k * N / (sclk * m)
+ *
+ * When combined with the sink-side equation, and realising that sclk is
+ * bclk_ratio * fs, we end up with:
+ * k = m * bclk_ratio / 128.
+ *
+ * Note: S/PDIF always uses a bclk_ratio of 64.
+ */
+static int tda998x_derive_cts_n(struct tda998x_priv *priv,
+ struct tda998x_audio_settings *settings,
+ unsigned int ratio)
+{
+ switch (ratio) {
+ case 16:
+ settings->cts_n = CTS_N_M(3) | CTS_N_K(0);
+ break;
+ case 32:
+ settings->cts_n = CTS_N_M(3) | CTS_N_K(1);
+ break;
+ case 48:
+ settings->cts_n = CTS_N_M(3) | CTS_N_K(2);
+ break;
+ case 64:
+ settings->cts_n = CTS_N_M(3) | CTS_N_K(3);
+ break;
+ case 128:
+ settings->cts_n = CTS_N_M(0) | CTS_N_K(0);
+ break;
+ default:
+ dev_err(&priv->hdmi->dev, "unsupported bclk ratio %ufs\n",
+ ratio);
+ return -EINVAL;
+ }
+ return 0;
+}
+
static void tda998x_audio_mute(struct tda998x_priv *priv, bool on)
{
if (on) {
@@ -858,79 +998,34 @@ static void tda998x_audio_mute(struct tda998x_priv *priv, bool on)
}
}
-static int
-tda998x_configure_audio(struct tda998x_priv *priv,
- struct tda998x_audio_params *params)
+static void tda998x_configure_audio(struct tda998x_priv *priv)
{
- u8 buf[6], clksel_aip, clksel_fs, cts_n, adiv;
+ const struct tda998x_audio_settings *settings = &priv->audio;
+ u8 buf[6], adiv;
u32 n;
- /* Enable audio ports */
- reg_write(priv, REG_ENA_AP, params->config);
-
- /* Set audio input source */
- switch (params->format) {
- case AFMT_SPDIF:
- reg_write(priv, REG_ENA_ACLK, 0);
- reg_write(priv, REG_MUX_AP, MUX_AP_SELECT_SPDIF);
- clksel_aip = AIP_CLKSEL_AIP_SPDIF;
- clksel_fs = AIP_CLKSEL_FS_FS64SPDIF;
- cts_n = CTS_N_M(3) | CTS_N_K(3);
- break;
-
- case AFMT_I2S:
- reg_write(priv, REG_ENA_ACLK, 1);
- reg_write(priv, REG_MUX_AP, MUX_AP_SELECT_I2S);
- clksel_aip = AIP_CLKSEL_AIP_I2S;
- clksel_fs = AIP_CLKSEL_FS_ACLK;
- switch (params->sample_width) {
- case 16:
- cts_n = CTS_N_M(3) | CTS_N_K(1);
- break;
- case 18:
- case 20:
- case 24:
- cts_n = CTS_N_M(3) | CTS_N_K(2);
- break;
- default:
- case 32:
- cts_n = CTS_N_M(3) | CTS_N_K(3);
- break;
- }
- break;
+ /* If audio is not configured, there is nothing to do. */
+ if (settings->ena_ap == 0)
+ return;
- default:
- dev_err(&priv->hdmi->dev, "Unsupported I2S format\n");
- return -EINVAL;
- }
+ adiv = tda998x_get_adiv(priv, settings->sample_rate);
- reg_write(priv, REG_AIP_CLKSEL, clksel_aip);
+ /* Enable audio ports */
+ reg_write(priv, REG_ENA_AP, settings->ena_ap);
+ reg_write(priv, REG_ENA_ACLK, settings->route->ena_aclk);
+ reg_write(priv, REG_MUX_AP, settings->route->mux_ap);
+ reg_write(priv, REG_I2S_FORMAT, settings->i2s_format);
+ reg_write(priv, REG_AIP_CLKSEL, settings->route->aip_clksel);
reg_clear(priv, REG_AIP_CNTRL_0, AIP_CNTRL_0_LAYOUT |
AIP_CNTRL_0_ACR_MAN); /* auto CTS */
- reg_write(priv, REG_CTS_N, cts_n);
-
- /*
- * Audio input somehow depends on HDMI line rate which is
- * related to pixclk. Testing showed that modes with pixclk
- * >100MHz need a larger divider while <40MHz need the default.
- * There is no detailed info in the datasheet, so we just
- * assume 100MHz requires larger divider.
- */
- adiv = AUDIO_DIV_SERCLK_8;
- if (priv->tmds_clock > 100000)
- adiv++; /* AUDIO_DIV_SERCLK_16 */
-
- /* S/PDIF asks for a larger divider */
- if (params->format == AFMT_SPDIF)
- adiv++; /* AUDIO_DIV_SERCLK_16 or _32 */
-
+ reg_write(priv, REG_CTS_N, settings->cts_n);
reg_write(priv, REG_AUDIO_DIV, adiv);
/*
* This is the approximate value of N, which happens to be
* the recommended values for non-coherent clocks.
*/
- n = 128 * params->sample_rate / 1000;
+ n = 128 * settings->sample_rate / 1000;
/* Write the CTS and N values */
buf[0] = 0x44;
@@ -941,9 +1036,6 @@ tda998x_configure_audio(struct tda998x_priv *priv,
buf[5] = n >> 16;
reg_write_range(priv, REG_ACR_CTS_0, buf, 6);
- /* Set CTS clock reference */
- reg_write(priv, REG_AIP_CLKSEL, clksel_aip | clksel_fs);
-
/* Reset CTS generator */
reg_set(priv, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_CTS);
reg_clear(priv, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_CTS);
@@ -952,17 +1044,17 @@ tda998x_configure_audio(struct tda998x_priv *priv,
* The REG_CH_STAT_B-registers skip IEC958 AES2 byte, because
* there is a separate register for each I2S wire.
*/
- buf[0] = params->status[0];
- buf[1] = params->status[1];
- buf[2] = params->status[3];
- buf[3] = params->status[4];
+ buf[0] = settings->status[0];
+ buf[1] = settings->status[1];
+ buf[2] = settings->status[3];
+ buf[3] = settings->status[4];
reg_write_range(priv, REG_CH_STAT_B(0), buf, 4);
tda998x_audio_mute(priv, true);
msleep(20);
tda998x_audio_mute(priv, false);
- return tda998x_write_aif(priv, &params->cea);
+ tda998x_write_aif(priv, &settings->cea);
}
static int tda998x_audio_hw_params(struct device *dev, void *data,
@@ -970,9 +1062,10 @@ static int tda998x_audio_hw_params(struct device *dev, void *data,
struct hdmi_codec_params *params)
{
struct tda998x_priv *priv = dev_get_drvdata(dev);
- int i, ret;
- struct tda998x_audio_params audio = {
- .sample_width = params->sample_width,
+ unsigned int bclk_ratio;
+ bool spdif = daifmt->fmt == HDMI_SPDIF;
+ int ret;
+ struct tda998x_audio_settings audio = {
.sample_rate = params->sample_rate,
.cea = params->cea,
};
@@ -982,46 +1075,48 @@ static int tda998x_audio_hw_params(struct device *dev, void *data,
switch (daifmt->fmt) {
case HDMI_I2S:
- if (daifmt->bit_clk_inv || daifmt->frame_clk_inv ||
- daifmt->bit_clk_master || daifmt->frame_clk_master) {
- dev_err(dev, "%s: Bad flags %d %d %d %d\n", __func__,
- daifmt->bit_clk_inv, daifmt->frame_clk_inv,
- daifmt->bit_clk_master,
- daifmt->frame_clk_master);
- return -EINVAL;
- }
- for (i = 0; i < ARRAY_SIZE(priv->audio_port); i++)
- if (priv->audio_port[i].format == AFMT_I2S)
- audio.config = priv->audio_port[i].config;
- audio.format = AFMT_I2S;
+ audio.i2s_format = I2S_FORMAT_PHILIPS;
+ break;
+ case HDMI_LEFT_J:
+ audio.i2s_format = I2S_FORMAT_LEFT_J;
+ break;
+ case HDMI_RIGHT_J:
+ audio.i2s_format = I2S_FORMAT_RIGHT_J;
break;
case HDMI_SPDIF:
- for (i = 0; i < ARRAY_SIZE(priv->audio_port); i++)
- if (priv->audio_port[i].format == AFMT_SPDIF)
- audio.config = priv->audio_port[i].config;
- audio.format = AFMT_SPDIF;
+ audio.i2s_format = 0;
break;
default:
dev_err(dev, "%s: Invalid format %d\n", __func__, daifmt->fmt);
return -EINVAL;
}
- if (audio.config == 0) {
- dev_err(dev, "%s: No audio configuration found\n", __func__);
+ if (!spdif &&
+ (daifmt->bit_clk_inv || daifmt->frame_clk_inv ||
+ daifmt->bit_clk_master || daifmt->frame_clk_master)) {
+ dev_err(dev, "%s: Bad flags %d %d %d %d\n", __func__,
+ daifmt->bit_clk_inv, daifmt->frame_clk_inv,
+ daifmt->bit_clk_master,
+ daifmt->frame_clk_master);
return -EINVAL;
}
+ ret = tda998x_derive_routing(priv, &audio, AUDIO_ROUTE_I2S + spdif);
+ if (ret < 0)
+ return ret;
+
+ bclk_ratio = spdif ? 64 : params->sample_width * 2;
+ ret = tda998x_derive_cts_n(priv, &audio, bclk_ratio);
+ if (ret < 0)
+ return ret;
+
mutex_lock(&priv->audio_mutex);
+ priv->audio = audio;
if (priv->supports_infoframes && priv->sink_has_audio)
- ret = tda998x_configure_audio(priv, &audio);
- else
- ret = 0;
-
- if (ret == 0)
- priv->audio_params = audio;
+ tda998x_configure_audio(priv);
mutex_unlock(&priv->audio_mutex);
- return ret;
+ return 0;
}
static void tda998x_audio_shutdown(struct device *dev, void *data)
@@ -1031,8 +1126,7 @@ static void tda998x_audio_shutdown(struct device *dev, void *data)
mutex_lock(&priv->audio_mutex);
reg_write(priv, REG_ENA_AP, 0);
-
- priv->audio_params.format = AFMT_UNUSED;
+ priv->audio.ena_ap = 0;
mutex_unlock(&priv->audio_mutex);
}
@@ -1076,16 +1170,11 @@ static int tda998x_audio_codec_init(struct tda998x_priv *priv,
.ops = &audio_codec_ops,
.max_i2s_channels = 2,
};
- int i;
- for (i = 0; i < ARRAY_SIZE(priv->audio_port); i++) {
- if (priv->audio_port[i].format == AFMT_I2S &&
- priv->audio_port[i].config != 0)
- codec_data.i2s = 1;
- if (priv->audio_port[i].format == AFMT_SPDIF &&
- priv->audio_port[i].config != 0)
- codec_data.spdif = 1;
- }
+ if (priv->audio_port_enable[AUDIO_ROUTE_I2S])
+ codec_data.i2s = 1;
+ if (priv->audio_port_enable[AUDIO_ROUTE_SPDIF])
+ codec_data.spdif = 1;
priv->audio_pdev = platform_device_register_data(
dev, HDMI_CODEC_DRV_NAME, PLATFORM_DEVID_AUTO,
@@ -1340,7 +1429,17 @@ static void tda998x_bridge_mode_set(struct drm_bridge *bridge,
u16 vwin1_line_s, vwin1_line_e;
u16 vwin2_line_s, vwin2_line_e;
u16 de_pix_s, de_pix_e;
- u8 reg, div, rep;
+ u8 reg, div, rep, sel_clk;
+
+ /*
+ * Since we are "computer" like, our source invariably produces
+ * full-range RGB. If the monitor supports full-range, then use
+ * it, otherwise reduce to limited-range.
+ */
+ priv->rgb_quant_range =
+ priv->connector.display_info.rgb_quant_range_selectable ?
+ HDMI_QUANTIZATION_RANGE_FULL :
+ drm_default_rgb_quant_range(adjusted_mode);
/*
* Internally TDA998x is using ITU-R BT.656 style sync but
@@ -1403,7 +1502,16 @@ static void tda998x_bridge_mode_set(struct drm_bridge *bridge,
(mode->vsync_end - mode->vsync_start)/2;
}
- tmds_clock = mode->clock;
+ /*
+ * Select pixel repeat depending on the double-clock flag
+ * (which means we have to repeat each pixel once.)
+ */
+ rep = mode->flags & DRM_MODE_FLAG_DBLCLK ? 1 : 0;
+ sel_clk = SEL_CLK_ENA_SC_CLK | SEL_CLK_SEL_CLK1 |
+ SEL_CLK_SEL_VRF_CLK(rep ? 2 : 0);
+
+ /* the TMDS clock is scaled up by the pixel repeat */
+ tmds_clock = mode->clock * (1 + rep);
/*
* The divisor is power-of-2. The TDA9983B datasheet gives
@@ -1419,6 +1527,8 @@ static void tda998x_bridge_mode_set(struct drm_bridge *bridge,
mutex_lock(&priv->audio_mutex);
+ priv->tmds_clock = tmds_clock;
+
/* mute the audio FIFO: */
reg_set(priv, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_FIFO);
@@ -1441,19 +1551,30 @@ static void tda998x_bridge_mode_set(struct drm_bridge *bridge,
reg_write(priv, REG_SERIALIZER, 0);
reg_write(priv, REG_HVF_CNTRL_1, HVF_CNTRL_1_VQR(0));
- /* TODO enable pixel repeat for pixel rates less than 25Msamp/s */
- rep = 0;
- reg_write(priv, REG_RPT_CNTRL, 0);
- reg_write(priv, REG_SEL_CLK, SEL_CLK_SEL_VRF_CLK(0) |
- SEL_CLK_SEL_CLK1 | SEL_CLK_ENA_SC_CLK);
-
+ reg_write(priv, REG_RPT_CNTRL, RPT_CNTRL_REPEAT(rep));
+ reg_write(priv, REG_SEL_CLK, sel_clk);
reg_write(priv, REG_PLL_SERIAL_2, PLL_SERIAL_2_SRL_NOSC(div) |
PLL_SERIAL_2_SRL_PR(rep));
- /* set color matrix bypass flag: */
- reg_write(priv, REG_MAT_CONTRL, MAT_CONTRL_MAT_BP |
- MAT_CONTRL_MAT_SC(1));
- reg_set(priv, REG_FEAT_POWERDOWN, FEAT_POWERDOWN_CSC);
+ /* set color matrix according to output rgb quant range */
+ if (priv->rgb_quant_range == HDMI_QUANTIZATION_RANGE_LIMITED) {
+ static u8 tda998x_full_to_limited_range[] = {
+ MAT_CONTRL_MAT_SC(2),
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x03, 0x6f, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x03, 0x6f, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x03, 0x6f,
+ 0x00, 0x40, 0x00, 0x40, 0x00, 0x40
+ };
+ reg_clear(priv, REG_FEAT_POWERDOWN, FEAT_POWERDOWN_CSC);
+ reg_write_range(priv, REG_MAT_CONTRL,
+ tda998x_full_to_limited_range,
+ sizeof(tda998x_full_to_limited_range));
+ } else {
+ reg_write(priv, REG_MAT_CONTRL, MAT_CONTRL_MAT_BP |
+ MAT_CONTRL_MAT_SC(1));
+ reg_set(priv, REG_FEAT_POWERDOWN, FEAT_POWERDOWN_CSC);
+ }
/* set BIAS tmds value: */
reg_write(priv, REG_ANA_GENERAL, 0x09);
@@ -1514,8 +1635,6 @@ static void tda998x_bridge_mode_set(struct drm_bridge *bridge,
/* must be last register set: */
reg_write(priv, REG_TBG_CNTRL_0, 0);
- priv->tmds_clock = adjusted_mode->clock;
-
/* CEA-861B section 6 says that:
* CEA version 1 (CEA-861) has no support for infoframes.
* CEA version 2 (CEA-861A) supports version 1 AVI infoframes,
@@ -1537,10 +1656,10 @@ static void tda998x_bridge_mode_set(struct drm_bridge *bridge,
reg_set(priv, REG_TX33, TX33_HDMI);
tda998x_write_avi(priv, adjusted_mode);
+ tda998x_write_vsi(priv, adjusted_mode);
- if (priv->audio_params.format != AFMT_UNUSED &&
- priv->sink_has_audio)
- tda998x_configure_audio(priv, &priv->audio_params);
+ if (priv->sink_has_audio)
+ tda998x_configure_audio(priv);
}
mutex_unlock(&priv->audio_mutex);
@@ -1569,7 +1688,7 @@ static int tda998x_get_audio_ports(struct tda998x_priv *priv,
return 0;
size /= sizeof(u32);
- if (size > 2 * ARRAY_SIZE(priv->audio_port) || size % 2 != 0) {
+ if (size > 2 * ARRAY_SIZE(priv->audio_port_enable) || size % 2 != 0) {
dev_err(&priv->hdmi->dev,
"Bad number of elements in audio-ports dt-property\n");
return -EINVAL;
@@ -1578,29 +1697,42 @@ static int tda998x_get_audio_ports(struct tda998x_priv *priv,
size /= 2;
for (i = 0; i < size; i++) {
+ unsigned int route;
u8 afmt = be32_to_cpup(&port_data[2*i]);
u8 ena_ap = be32_to_cpup(&port_data[2*i+1]);
- if (afmt != AFMT_SPDIF && afmt != AFMT_I2S) {
+ switch (afmt) {
+ case AFMT_I2S:
+ route = AUDIO_ROUTE_I2S;
+ break;
+ case AFMT_SPDIF:
+ route = AUDIO_ROUTE_SPDIF;
+ break;
+ default:
dev_err(&priv->hdmi->dev,
"Bad audio format %u\n", afmt);
return -EINVAL;
}
- priv->audio_port[i].format = afmt;
- priv->audio_port[i].config = ena_ap;
- }
+ if (!ena_ap) {
+ dev_err(&priv->hdmi->dev, "invalid zero port config\n");
+ continue;
+ }
- if (priv->audio_port[0].format == priv->audio_port[1].format) {
- dev_err(&priv->hdmi->dev,
- "There can only be on I2S port and one SPDIF port\n");
- return -EINVAL;
+ if (priv->audio_port_enable[route]) {
+ dev_err(&priv->hdmi->dev,
+ "%s format already configured\n",
+ route == AUDIO_ROUTE_SPDIF ? "SPDIF" : "I2S");
+ return -EINVAL;
+ }
+
+ priv->audio_port_enable[route] = ena_ap;
}
return 0;
}
-static void tda998x_set_config(struct tda998x_priv *priv,
- const struct tda998x_encoder_params *p)
+static int tda998x_set_config(struct tda998x_priv *priv,
+ const struct tda998x_encoder_params *p)
{
priv->vip_cntrl_0 = VIP_CNTRL_0_SWAP_A(p->swap_a) |
(p->mirr_a ? VIP_CNTRL_0_MIRR_A : 0) |
@@ -1615,7 +1747,26 @@ static void tda998x_set_config(struct tda998x_priv *priv,
VIP_CNTRL_2_SWAP_F(p->swap_f) |
(p->mirr_f ? VIP_CNTRL_2_MIRR_F : 0);
- priv->audio_params = p->audio_params;
+ if (p->audio_params.format != AFMT_UNUSED) {
+ unsigned int ratio, route;
+ bool spdif = p->audio_params.format == AFMT_SPDIF;
+
+ route = AUDIO_ROUTE_I2S + spdif;
+
+ priv->audio.route = &tda998x_audio_route[route];
+ priv->audio.cea = p->audio_params.cea;
+ priv->audio.sample_rate = p->audio_params.sample_rate;
+ memcpy(priv->audio.status, p->audio_params.status,
+ min(sizeof(priv->audio.status),
+ sizeof(p->audio_params.status)));
+ priv->audio.ena_ap = p->audio_params.config;
+ priv->audio.i2s_format = I2S_FORMAT_PHILIPS;
+
+ ratio = spdif ? 64 : p->audio_params.sample_width * 2;
+ return tda998x_derive_cts_n(priv, &priv->audio, ratio);
+ }
+
+ return 0;
}
static void tda998x_destroy(struct device *dev)
@@ -1814,10 +1965,13 @@ static int tda998x_create(struct device *dev)
if (ret)
goto fail;
- if (priv->audio_port[0].format != AFMT_UNUSED)
+ if (priv->audio_port_enable[AUDIO_ROUTE_I2S] ||
+ priv->audio_port_enable[AUDIO_ROUTE_SPDIF])
tda998x_audio_codec_init(priv, &client->dev);
} else if (dev->platform_data) {
- tda998x_set_config(priv, dev->platform_data);
+ ret = tda998x_set_config(priv, dev->platform_data);
+ if (ret)
+ goto fail;
}
priv->bridge.funcs = &tda998x_bridge_funcs;
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-21 11:55:00 +0300