diff options
Diffstat (limited to 'drivers/gpu/drm/bridge/ti-sn65dsi86.c')
| -rw-r--r-- | drivers/gpu/drm/bridge/ti-sn65dsi86.c | 111 |
1 files changed, 72 insertions, 39 deletions
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c index ff4d0564122a..6595f954135a 100644 --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c @@ -331,12 +331,18 @@ static void ti_sn65dsi86_enable_comms(struct ti_sn65dsi86 *pdata) * 200 ms. We'll assume that the panel driver will have the hardcoded * delay in its prepare and always disable HPD. * - * If HPD somehow makes sense on some future panel we'll have to - * change this to be conditional on someone specifying that HPD should - * be used. + * For DisplayPort bridge type, we need HPD. So we use the bridge type + * to conditionally disable HPD. + * NOTE: The bridge type is set in ti_sn_bridge_probe() but enable_comms() + * can be called before. So for DisplayPort, HPD will be enabled once + * bridge type is set. We are using bridge type instead of "no-hpd" + * property because it is not used properly in devicetree description + * and hence is unreliable. */ - regmap_update_bits(pdata->regmap, SN_HPD_DISABLE_REG, HPD_DISABLE, - HPD_DISABLE); + + if (pdata->bridge.type != DRM_MODE_CONNECTOR_DisplayPort) + regmap_update_bits(pdata->regmap, SN_HPD_DISABLE_REG, HPD_DISABLE, + HPD_DISABLE); pdata->comms_enabled = true; @@ -424,36 +430,8 @@ static int status_show(struct seq_file *s, void *data) return 0; } - DEFINE_SHOW_ATTRIBUTE(status); -static void ti_sn65dsi86_debugfs_remove(void *data) -{ - debugfs_remove_recursive(data); -} - -static void ti_sn65dsi86_debugfs_init(struct ti_sn65dsi86 *pdata) -{ - struct device *dev = pdata->dev; - struct dentry *debugfs; - int ret; - - debugfs = debugfs_create_dir(dev_name(dev), NULL); - - /* - * We might get an error back if debugfs wasn't enabled in the kernel - * so let's just silently return upon failure. - */ - if (IS_ERR_OR_NULL(debugfs)) - return; - - ret = devm_add_action_or_reset(dev, ti_sn65dsi86_debugfs_remove, debugfs); - if (ret) - return; - - debugfs_create_file("status", 0600, debugfs, pdata, &status_fops); -} - /* ----------------------------------------------------------------------------- * Auxiliary Devices (*not* AUX) */ @@ -480,6 +458,7 @@ static int ti_sn65dsi86_add_aux_device(struct ti_sn65dsi86 *pdata, const char *name) { struct device *dev = pdata->dev; + const struct i2c_client *client = to_i2c_client(dev); struct auxiliary_device *aux; int ret; @@ -488,6 +467,7 @@ static int ti_sn65dsi86_add_aux_device(struct ti_sn65dsi86 *pdata, return -ENOMEM; aux->name = name; + aux->id = (client->adapter->nr << 10) | client->addr; aux->dev.parent = dev; aux->dev.release = ti_sn65dsi86_aux_device_release; device_set_of_node_from_dev(&aux->dev, dev); @@ -1180,9 +1160,14 @@ static enum drm_connector_status ti_sn_bridge_detect(struct drm_bridge *bridge) struct ti_sn65dsi86 *pdata = bridge_to_ti_sn65dsi86(bridge); int val = 0; - pm_runtime_get_sync(pdata->dev); + /* + * Runtime reference is grabbed in ti_sn_bridge_hpd_enable() + * as the chip won't report HPD just after being powered on. + * HPD_DEBOUNCED_STATE reflects correct state only after the + * debounce time (~100-400 ms). + */ + regmap_read(pdata->regmap, SN_HPD_DISABLE_REG, &val); - pm_runtime_put_autosuspend(pdata->dev); return val & HPD_DEBOUNCED_STATE ? connector_status_connected : connector_status_disconnected; @@ -1196,6 +1181,35 @@ static struct edid *ti_sn_bridge_get_edid(struct drm_bridge *bridge, return drm_get_edid(connector, &pdata->aux.ddc); } +static void ti_sn65dsi86_debugfs_init(struct drm_bridge *bridge, struct dentry *root) +{ + struct ti_sn65dsi86 *pdata = bridge_to_ti_sn65dsi86(bridge); + struct dentry *debugfs; + + debugfs = debugfs_create_dir(dev_name(pdata->dev), root); + debugfs_create_file("status", 0600, debugfs, pdata, &status_fops); +} + +static void ti_sn_bridge_hpd_enable(struct drm_bridge *bridge) +{ + struct ti_sn65dsi86 *pdata = bridge_to_ti_sn65dsi86(bridge); + + /* + * Device needs to be powered on before reading the HPD state + * for reliable hpd detection in ti_sn_bridge_detect() due to + * the high debounce time. + */ + + pm_runtime_get_sync(pdata->dev); +} + +static void ti_sn_bridge_hpd_disable(struct drm_bridge *bridge) +{ + struct ti_sn65dsi86 *pdata = bridge_to_ti_sn65dsi86(bridge); + + pm_runtime_put_autosuspend(pdata->dev); +} + static const struct drm_bridge_funcs ti_sn_bridge_funcs = { .attach = ti_sn_bridge_attach, .detach = ti_sn_bridge_detach, @@ -1209,6 +1223,9 @@ static const struct drm_bridge_funcs ti_sn_bridge_funcs = { .atomic_reset = drm_atomic_helper_bridge_reset, .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, + .debugfs_init = ti_sn65dsi86_debugfs_init, + .hpd_enable = ti_sn_bridge_hpd_enable, + .hpd_disable = ti_sn_bridge_hpd_disable, }; static void ti_sn_bridge_parse_lanes(struct ti_sn65dsi86 *pdata, @@ -1297,8 +1314,26 @@ static int ti_sn_bridge_probe(struct auxiliary_device *adev, pdata->bridge.type = pdata->next_bridge->type == DRM_MODE_CONNECTOR_DisplayPort ? DRM_MODE_CONNECTOR_DisplayPort : DRM_MODE_CONNECTOR_eDP; - if (pdata->bridge.type == DRM_MODE_CONNECTOR_DisplayPort) - pdata->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT; + if (pdata->bridge.type == DRM_MODE_CONNECTOR_DisplayPort) { + pdata->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT | + DRM_BRIDGE_OP_HPD; + /* + * If comms were already enabled they would have been enabled + * with the wrong value of HPD_DISABLE. Update it now. Comms + * could be enabled if anyone is holding a pm_runtime reference + * (like if a GPIO is in use). Note that in most cases nobody + * is doing AUX channel xfers before the bridge is added so + * HPD doesn't _really_ matter then. The only exception is in + * the eDP case where the panel wants to read the EDID before + * the bridge is added. We always consistently have HPD disabled + * for eDP. + */ + mutex_lock(&pdata->comms_mutex); + if (pdata->comms_enabled) + regmap_update_bits(pdata->regmap, SN_HPD_DISABLE_REG, + HPD_DISABLE, 0); + mutex_unlock(&pdata->comms_mutex); + } drm_bridge_add(&pdata->bridge); @@ -1915,8 +1950,6 @@ static int ti_sn65dsi86_probe(struct i2c_client *client, if (ret) return ret; - ti_sn65dsi86_debugfs_init(pdata); - /* * Break ourselves up into a collection of aux devices. The only real * motiviation here is to solve the chicken-and-egg problem of probe |