diff options
Diffstat (limited to 'drivers/gpu/drm/bridge/tc358767.c')
| -rw-r--r-- | drivers/gpu/drm/bridge/tc358767.c | 48 |
1 files changed, 38 insertions, 10 deletions
diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c index 8e28e738cb52..e6403b9549f1 100644 --- a/drivers/gpu/drm/bridge/tc358767.c +++ b/drivers/gpu/drm/bridge/tc358767.c @@ -98,6 +98,8 @@ #define DP0_STARTVAL 0x064c #define DP0_ACTIVEVAL 0x0650 #define DP0_SYNCVAL 0x0654 +#define SYNCVAL_HS_POL_ACTIVE_LOW (1 << 15) +#define SYNCVAL_VS_POL_ACTIVE_LOW (1 << 31) #define DP0_MISC 0x0658 #define TU_SIZE_RECOMMENDED (63) /* LSCLK cycles per TU */ #define BPC_6 (0 << 5) @@ -142,6 +144,8 @@ #define DP0_LTLOOPCTRL 0x06d8 #define DP0_SNKLTCTRL 0x06e4 +#define DP1_SRCCTRL 0x07a0 + /* PHY */ #define DP_PHY_CTRL 0x0800 #define DP_PHY_RST BIT(28) /* DP PHY Global Soft Reset */ @@ -150,6 +154,7 @@ #define PHY_M1_RST BIT(12) /* Reset PHY1 Main Channel */ #define PHY_RDY BIT(16) /* PHY Main Channels Ready */ #define PHY_M0_RST BIT(8) /* Reset PHY0 Main Channel */ +#define PHY_2LANE BIT(2) /* PHY Enable 2 lanes */ #define PHY_A0_EN BIT(1) /* PHY Aux Channel0 Enable */ #define PHY_M0_EN BIT(0) /* PHY Main Channel0 Enable */ @@ -540,6 +545,7 @@ static int tc_aux_link_setup(struct tc_data *tc) unsigned long rate; u32 value; int ret; + u32 dp_phy_ctrl; rate = clk_get_rate(tc->refclk); switch (rate) { @@ -564,7 +570,10 @@ static int tc_aux_link_setup(struct tc_data *tc) value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2; tc_write(SYS_PLLPARAM, value); - tc_write(DP_PHY_CTRL, BGREN | PWR_SW_EN | BIT(2) | PHY_A0_EN); + dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_A0_EN; + if (tc->link.base.num_lanes == 2) + dp_phy_ctrl |= PHY_2LANE; + tc_write(DP_PHY_CTRL, dp_phy_ctrl); /* * Initially PLLs are in bypass. Force PLL parameter update, @@ -719,7 +728,9 @@ static int tc_set_video_mode(struct tc_data *tc, struct drm_display_mode *mode) tc_write(DP0_ACTIVEVAL, (mode->vdisplay << 16) | (mode->hdisplay)); - tc_write(DP0_SYNCVAL, (vsync_len << 16) | (hsync_len << 0)); + tc_write(DP0_SYNCVAL, (vsync_len << 16) | (hsync_len << 0) | + ((mode->flags & DRM_MODE_FLAG_NHSYNC) ? SYNCVAL_HS_POL_ACTIVE_LOW : 0) | + ((mode->flags & DRM_MODE_FLAG_NVSYNC) ? SYNCVAL_VS_POL_ACTIVE_LOW : 0)); tc_write(DPIPXLFMT, VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW | DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 | DPI_BPP_RGB888); @@ -829,12 +840,11 @@ static int tc_main_link_setup(struct tc_data *tc) if (!tc->mode) return -EINVAL; - /* from excel file - DP0_SrcCtrl */ - tc_write(DP0_SRCCTRL, DP0_SRCCTRL_SCRMBLDIS | DP0_SRCCTRL_EN810B | - DP0_SRCCTRL_LANESKEW | DP0_SRCCTRL_LANES_2 | - DP0_SRCCTRL_BW27 | DP0_SRCCTRL_AUTOCORRECT); - /* from excel file - DP1_SrcCtrl */ - tc_write(0x07a0, 0x00003083); + tc_write(DP0_SRCCTRL, tc_srcctrl(tc)); + /* SSCG and BW27 on DP1 must be set to the same as on DP0 */ + tc_write(DP1_SRCCTRL, + (tc->link.spread ? DP0_SRCCTRL_SSCG : 0) | + ((tc->link.base.rate != 162000) ? DP0_SRCCTRL_BW27 : 0)); rate = clk_get_rate(tc->refclk); switch (rate) { @@ -855,8 +865,11 @@ static int tc_main_link_setup(struct tc_data *tc) } value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2; tc_write(SYS_PLLPARAM, value); + /* Setup Main Link */ - dp_phy_ctrl = BGREN | PWR_SW_EN | BIT(2) | PHY_A0_EN | PHY_M0_EN; + dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_A0_EN | PHY_M0_EN; + if (tc->link.base.num_lanes == 2) + dp_phy_ctrl |= PHY_2LANE; tc_write(DP_PHY_CTRL, dp_phy_ctrl); msleep(100); @@ -1105,10 +1118,20 @@ static bool tc_bridge_mode_fixup(struct drm_bridge *bridge, static enum drm_mode_status tc_connector_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + struct tc_data *tc = connector_to_tc(connector); + u32 req, avail; + u32 bits_per_pixel = 24; + /* DPI interface clock limitation: upto 154 MHz */ if (mode->clock > 154000) return MODE_CLOCK_HIGH; + req = mode->clock * bits_per_pixel / 8; + avail = tc->link.base.num_lanes * tc->link.base.rate; + + if (req > avail) + return MODE_BAD; + return MODE_OK; } @@ -1186,7 +1209,8 @@ static int tc_bridge_attach(struct drm_bridge *bridge) /* Create eDP connector */ drm_connector_helper_add(&tc->connector, &tc_connector_helper_funcs); ret = drm_connector_init(drm, &tc->connector, &tc_connector_funcs, - DRM_MODE_CONNECTOR_eDP); + tc->panel ? DRM_MODE_CONNECTOR_eDP : + DRM_MODE_CONNECTOR_DisplayPort); if (ret) return ret; @@ -1195,6 +1219,10 @@ static int tc_bridge_attach(struct drm_bridge *bridge) drm_display_info_set_bus_formats(&tc->connector.display_info, &bus_format, 1); + tc->connector.display_info.bus_flags = + DRM_BUS_FLAG_DE_HIGH | + DRM_BUS_FLAG_PIXDATA_NEGEDGE | + DRM_BUS_FLAG_SYNC_NEGEDGE; drm_connector_attach_encoder(&tc->connector, tc->bridge.encoder); return 0; |