diff options
Diffstat (limited to 'drivers/firmware')
| -rw-r--r-- | drivers/firmware/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/firmware/Makefile | 2 | ||||
| -rw-r--r-- | drivers/firmware/dmi_scan.c | 40 | ||||
| -rw-r--r-- | drivers/firmware/efi/libstub/arm-stub.c | 7 | ||||
| -rw-r--r-- | drivers/firmware/efi/libstub/efistub.h | 2 | ||||
| -rw-r--r-- | drivers/firmware/efi/libstub/fdt.c | 7 | ||||
| -rw-r--r-- | drivers/firmware/efi/runtime-map.c | 6 | ||||
| -rw-r--r-- | drivers/firmware/pcdp.c | 4 | ||||
| -rw-r--r-- | drivers/firmware/qcom_scm.c | 494 |
9 files changed, 537 insertions, 29 deletions
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 41983883cef4..6517132e5d8b 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -132,6 +132,10 @@ config ISCSI_IBFT detect iSCSI boot parameters dynamically during system boot, say Y. Otherwise, say N. +config QCOM_SCM + bool + depends on ARM || ARM64 + source "drivers/firmware/google/Kconfig" source "drivers/firmware/efi/Kconfig" diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile index 5373dc5b6011..3fdd3912709a 100644 --- a/drivers/firmware/Makefile +++ b/drivers/firmware/Makefile @@ -11,6 +11,8 @@ obj-$(CONFIG_DMIID) += dmi-id.o obj-$(CONFIG_ISCSI_IBFT_FIND) += iscsi_ibft_find.o obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o +obj-$(CONFIG_QCOM_SCM) += qcom_scm.o +CFLAGS_qcom_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) obj-$(CONFIG_GOOGLE_FIRMWARE) += google/ obj-$(CONFIG_EFI) += efi/ diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index 2eebd28b4c40..97b1616aa391 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -17,7 +17,9 @@ */ static const char dmi_empty_string[] = " "; -static u16 __initdata dmi_ver; +static u32 dmi_ver __initdata; +static u32 dmi_len; +static u16 dmi_num; /* * Catch too early calls to dmi_check_system(): */ @@ -78,7 +80,7 @@ static const char * __init dmi_string(const struct dmi_header *dm, u8 s) * We have to be cautious here. We have seen BIOSes with DMI pointers * pointing to completely the wrong place for example */ -static void dmi_table(u8 *buf, u32 len, int num, +static void dmi_table(u8 *buf, void (*decode)(const struct dmi_header *, void *), void *private_data) { @@ -91,8 +93,8 @@ static void dmi_table(u8 *buf, u32 len, int num, * off the end of the table (should never happen but sometimes does * on bogus implementations.) */ - while ((!num || i < num) && - (data - buf + sizeof(struct dmi_header)) <= len) { + while ((!dmi_num || i < dmi_num) && + (data - buf + sizeof(struct dmi_header)) <= dmi_len) { const struct dmi_header *dm = (const struct dmi_header *)data; /* @@ -101,9 +103,9 @@ static void dmi_table(u8 *buf, u32 len, int num, * table in dmi_decode or dmi_string */ data += dm->length; - while ((data - buf < len - 1) && (data[0] || data[1])) + while ((data - buf < dmi_len - 1) && (data[0] || data[1])) data++; - if (data - buf < len - 1) + if (data - buf < dmi_len - 1) decode(dm, private_data); /* @@ -118,8 +120,6 @@ static void dmi_table(u8 *buf, u32 len, int num, } static phys_addr_t dmi_base; -static u32 dmi_len; -static u16 dmi_num; static int __init dmi_walk_early(void (*decode)(const struct dmi_header *, void *)) @@ -130,7 +130,7 @@ static int __init dmi_walk_early(void (*decode)(const struct dmi_header *, if (buf == NULL) return -1; - dmi_table(buf, dmi_len, dmi_num, decode, NULL); + dmi_table(buf, decode, NULL); add_device_randomness(buf, dmi_len); @@ -201,7 +201,7 @@ static void __init dmi_save_uuid(const struct dmi_header *dm, int slot, * the UUID are supposed to be little-endian encoded. The specification * says that this is the defacto standard. */ - if (dmi_ver >= 0x0206) + if (dmi_ver >= 0x020600) sprintf(s, "%pUL", d); else sprintf(s, "%pUB", d); @@ -473,7 +473,7 @@ static void __init dmi_format_ids(char *buf, size_t len) */ static int __init dmi_present(const u8 *buf) { - int smbios_ver; + u32 smbios_ver; if (memcmp(buf, "_SM_", 4) == 0 && buf[5] < 32 && dmi_checksum(buf, buf[5])) { @@ -499,21 +499,23 @@ static int __init dmi_present(const u8 *buf) buf += 16; if (memcmp(buf, "_DMI_", 5) == 0 && dmi_checksum(buf, 15)) { + if (smbios_ver) + dmi_ver = smbios_ver; + else + dmi_ver = (buf[14] & 0xF0) << 4 | (buf[14] & 0x0F); dmi_num = get_unaligned_le16(buf + 12); dmi_len = get_unaligned_le16(buf + 6); dmi_base = get_unaligned_le32(buf + 8); if (dmi_walk_early(dmi_decode) == 0) { if (smbios_ver) { - dmi_ver = smbios_ver; pr_info("SMBIOS %d.%d present.\n", dmi_ver >> 8, dmi_ver & 0xFF); } else { - dmi_ver = (buf[14] & 0xF0) << 4 | - (buf[14] & 0x0F); pr_info("Legacy DMI %d.%d present.\n", dmi_ver >> 8, dmi_ver & 0xFF); } + dmi_ver <<= 8; dmi_format_ids(dmi_ids_string, sizeof(dmi_ids_string)); printk(KERN_DEBUG "DMI: %s\n", dmi_ids_string); return 0; @@ -531,14 +533,16 @@ static int __init dmi_smbios3_present(const u8 *buf) { if (memcmp(buf, "_SM3_", 5) == 0 && buf[6] < 32 && dmi_checksum(buf, buf[6])) { - dmi_ver = get_unaligned_be16(buf + 7); + dmi_ver = get_unaligned_be32(buf + 6); + dmi_ver &= 0xFFFFFF; dmi_num = 0; /* No longer specified */ dmi_len = get_unaligned_le32(buf + 12); dmi_base = get_unaligned_le64(buf + 16); if (dmi_walk_early(dmi_decode) == 0) { - pr_info("SMBIOS %d.%d present.\n", - dmi_ver >> 8, dmi_ver & 0xFF); + pr_info("SMBIOS %d.%d.%d present.\n", + dmi_ver >> 16, (dmi_ver >> 8) & 0xFF, + dmi_ver & 0xFF); dmi_format_ids(dmi_ids_string, sizeof(dmi_ids_string)); pr_debug("DMI: %s\n", dmi_ids_string); return 0; @@ -893,7 +897,7 @@ int dmi_walk(void (*decode)(const struct dmi_header *, void *), if (buf == NULL) return -1; - dmi_table(buf, dmi_len, dmi_num, decode, private_data); + dmi_table(buf, decode, private_data); dmi_unmap(buf); return 0; diff --git a/drivers/firmware/efi/libstub/arm-stub.c b/drivers/firmware/efi/libstub/arm-stub.c index dcae482a9a17..e29560e6b40b 100644 --- a/drivers/firmware/efi/libstub/arm-stub.c +++ b/drivers/firmware/efi/libstub/arm-stub.c @@ -175,7 +175,7 @@ unsigned long efi_entry(void *handle, efi_system_table_t *sys_table, unsigned long initrd_addr; u64 initrd_size = 0; unsigned long fdt_addr = 0; /* Original DTB */ - u64 fdt_size = 0; /* We don't get size from configuration table */ + unsigned long fdt_size = 0; char *cmdline_ptr = NULL; int cmdline_size = 0; unsigned long new_fdt_addr; @@ -239,8 +239,7 @@ unsigned long efi_entry(void *handle, efi_system_table_t *sys_table, } else { status = handle_cmdline_files(sys_table, image, cmdline_ptr, "dtb=", - ~0UL, (unsigned long *)&fdt_addr, - (unsigned long *)&fdt_size); + ~0UL, &fdt_addr, &fdt_size); if (status != EFI_SUCCESS) { pr_efi_err(sys_table, "Failed to load device tree!\n"); @@ -252,7 +251,7 @@ unsigned long efi_entry(void *handle, efi_system_table_t *sys_table, pr_efi(sys_table, "Using DTB from command line\n"); } else { /* Look for a device tree configuration table entry. */ - fdt_addr = (uintptr_t)get_fdt(sys_table); + fdt_addr = (uintptr_t)get_fdt(sys_table, &fdt_size); if (fdt_addr) pr_efi(sys_table, "Using DTB from configuration table\n"); } diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h index 47437b16b186..e334a01cf92f 100644 --- a/drivers/firmware/efi/libstub/efistub.h +++ b/drivers/firmware/efi/libstub/efistub.h @@ -41,7 +41,7 @@ efi_status_t allocate_new_fdt_and_exit_boot(efi_system_table_t *sys_table, unsigned long fdt_addr, unsigned long fdt_size); -void *get_fdt(efi_system_table_t *sys_table); +void *get_fdt(efi_system_table_t *sys_table, unsigned long *fdt_size); void efi_get_virtmap(efi_memory_desc_t *memory_map, unsigned long map_size, unsigned long desc_size, efi_memory_desc_t *runtime_map, diff --git a/drivers/firmware/efi/libstub/fdt.c b/drivers/firmware/efi/libstub/fdt.c index 91da56c4fd54..ef5d764e2a27 100644 --- a/drivers/firmware/efi/libstub/fdt.c +++ b/drivers/firmware/efi/libstub/fdt.c @@ -323,7 +323,7 @@ fail: return EFI_LOAD_ERROR; } -void *get_fdt(efi_system_table_t *sys_table) +void *get_fdt(efi_system_table_t *sys_table, unsigned long *fdt_size) { efi_guid_t fdt_guid = DEVICE_TREE_GUID; efi_config_table_t *tables; @@ -336,6 +336,11 @@ void *get_fdt(efi_system_table_t *sys_table) for (i = 0; i < sys_table->nr_tables; i++) if (efi_guidcmp(tables[i].guid, fdt_guid) == 0) { fdt = (void *) tables[i].table; + if (fdt_check_header(fdt) != 0) { + pr_efi_err(sys_table, "Invalid header detected on UEFI supplied FDT, ignoring ...\n"); + return NULL; + } + *fdt_size = fdt_totalsize(fdt); break; } diff --git a/drivers/firmware/efi/runtime-map.c b/drivers/firmware/efi/runtime-map.c index 87b8e3b900d2..5c55227a34c8 100644 --- a/drivers/firmware/efi/runtime-map.c +++ b/drivers/firmware/efi/runtime-map.c @@ -120,7 +120,8 @@ add_sysfs_runtime_map_entry(struct kobject *kobj, int nr) entry = kzalloc(sizeof(*entry), GFP_KERNEL); if (!entry) { kset_unregister(map_kset); - return entry; + map_kset = NULL; + return ERR_PTR(-ENOMEM); } memcpy(&entry->md, efi_runtime_map + nr * efi_memdesc_size, @@ -132,6 +133,7 @@ add_sysfs_runtime_map_entry(struct kobject *kobj, int nr) if (ret) { kobject_put(&entry->kobj); kset_unregister(map_kset); + map_kset = NULL; return ERR_PTR(ret); } @@ -195,8 +197,6 @@ out_add_entry: entry = *(map_entries + j); kobject_put(&entry->kobj); } - if (map_kset) - kset_unregister(map_kset); out: return ret; } diff --git a/drivers/firmware/pcdp.c b/drivers/firmware/pcdp.c index a330492e06f9..75273a251603 100644 --- a/drivers/firmware/pcdp.c +++ b/drivers/firmware/pcdp.c @@ -15,7 +15,7 @@ #include <linux/console.h> #include <linux/efi.h> #include <linux/serial.h> -#include <linux/serial_8250.h> +#include <linux/serial_core.h> #include <asm/vga.h> #include "pcdp.h" @@ -43,7 +43,7 @@ setup_serial_console(struct pcdp_uart *uart) } add_preferred_console("uart", 8250, &options[9]); - return setup_early_serial8250_console(options); + return setup_earlycon(options); #else return -ENODEV; #endif diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c new file mode 100644 index 000000000000..994b50fd997c --- /dev/null +++ b/drivers/firmware/qcom_scm.c @@ -0,0 +1,494 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * Copyright (C) 2015 Linaro Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/qcom_scm.h> + +#include <asm/outercache.h> +#include <asm/cacheflush.h> + + +#define QCOM_SCM_ENOMEM -5 +#define QCOM_SCM_EOPNOTSUPP -4 +#define QCOM_SCM_EINVAL_ADDR -3 +#define QCOM_SCM_EINVAL_ARG -2 +#define QCOM_SCM_ERROR -1 +#define QCOM_SCM_INTERRUPTED 1 + +#define QCOM_SCM_FLAG_COLDBOOT_CPU0 0x00 +#define QCOM_SCM_FLAG_COLDBOOT_CPU1 0x01 +#define QCOM_SCM_FLAG_COLDBOOT_CPU2 0x08 +#define QCOM_SCM_FLAG_COLDBOOT_CPU3 0x20 + +#define QCOM_SCM_FLAG_WARMBOOT_CPU0 0x04 +#define QCOM_SCM_FLAG_WARMBOOT_CPU1 0x02 +#define QCOM_SCM_FLAG_WARMBOOT_CPU2 0x10 +#define QCOM_SCM_FLAG_WARMBOOT_CPU3 0x40 + +struct qcom_scm_entry { + int flag; + void *entry; +}; + +static struct qcom_scm_entry qcom_scm_wb[] = { + { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU0 }, + { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU1 }, + { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU2 }, + { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 }, +}; + +static DEFINE_MUTEX(qcom_scm_lock); + +/** + * struct qcom_scm_command - one SCM command buffer + * @len: total available memory for command and response + * @buf_offset: start of command buffer + * @resp_hdr_offset: start of response buffer + * @id: command to be executed + * @buf: buffer returned from qcom_scm_get_command_buffer() + * + * An SCM command is laid out in memory as follows: + * + * ------------------- <--- struct qcom_scm_command + * | command header | + * ------------------- <--- qcom_scm_get_command_buffer() + * | command buffer | + * ------------------- <--- struct qcom_scm_response and + * | response header | qcom_scm_command_to_response() + * ------------------- <--- qcom_scm_get_response_buffer() + * | response buffer | + * ------------------- + * + * There can be arbitrary padding between the headers and buffers so + * you should always use the appropriate qcom_scm_get_*_buffer() routines + * to access the buffers in a safe manner. + */ +struct qcom_scm_command { + __le32 len; + __le32 buf_offset; + __le32 resp_hdr_offset; + __le32 id; + __le32 buf[0]; +}; + +/** + * struct qcom_scm_response - one SCM response buffer + * @len: total available memory for response + * @buf_offset: start of response data relative to start of qcom_scm_response + * @is_complete: indicates if the command has finished processing + */ +struct qcom_scm_response { + __le32 len; + __le32 buf_offset; + __le32 is_complete; +}; + +/** + * alloc_qcom_scm_command() - Allocate an SCM command + * @cmd_size: size of the command buffer + * @resp_size: size of the response buffer + * + * Allocate an SCM command, including enough room for the command + * and response headers as well as the command and response buffers. + * + * Returns a valid &qcom_scm_command on success or %NULL if the allocation fails. + */ +static struct qcom_scm_command *alloc_qcom_scm_command(size_t cmd_size, size_t resp_size) +{ + struct qcom_scm_command *cmd; + size_t len = sizeof(*cmd) + sizeof(struct qcom_scm_response) + cmd_size + + resp_size; + u32 offset; + + cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL); + if (cmd) { + cmd->len = cpu_to_le32(len); + offset = offsetof(struct qcom_scm_command, buf); + cmd->buf_offset = cpu_to_le32(offset); + cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size); + } + return cmd; +} + +/** + * free_qcom_scm_command() - Free an SCM command + * @cmd: command to free + * + * Free an SCM command. + */ +static inline void free_qcom_scm_command(struct qcom_scm_command *cmd) +{ + kfree(cmd); +} + +/** + * qcom_scm_command_to_response() - Get a pointer to a qcom_scm_response + * @cmd: command + * + * Returns a pointer to a response for a command. + */ +static inline struct qcom_scm_response *qcom_scm_command_to_response( + const struct qcom_scm_command *cmd) +{ + return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset); +} + +/** + * qcom_scm_get_command_buffer() - Get a pointer to a command buffer + * @cmd: command + * + * Returns a pointer to the command buffer of a command. + */ +static inline void *qcom_scm_get_command_buffer(const struct qcom_scm_command *cmd) +{ + return (void *)cmd->buf; +} + +/** + * qcom_scm_get_response_buffer() - Get a pointer to a response buffer + * @rsp: response + * + * Returns a pointer to a response buffer of a response. + */ +static inline void *qcom_scm_get_response_buffer(const struct qcom_scm_response *rsp) +{ + return (void *)rsp + le32_to_cpu(rsp->buf_offset); +} + +static int qcom_scm_remap_error(int err) +{ + pr_err("qcom_scm_call failed with error code %d\n", err); + switch (err) { + case QCOM_SCM_ERROR: + return -EIO; + case QCOM_SCM_EINVAL_ADDR: + case QCOM_SCM_EINVAL_ARG: + return -EINVAL; + case QCOM_SCM_EOPNOTSUPP: + return -EOPNOTSUPP; + case QCOM_SCM_ENOMEM: + return -ENOMEM; + } + return -EINVAL; +} + +static u32 smc(u32 cmd_addr) +{ + int context_id; + register u32 r0 asm("r0") = 1; + register u32 r1 asm("r1") = (u32)&context_id; + register u32 r2 asm("r2") = cmd_addr; + do { + asm volatile( + __asmeq("%0", "r0") + __asmeq("%1", "r0") + __asmeq("%2", "r1") + __asmeq("%3", "r2") +#ifdef REQUIRES_SEC + ".arch_extension sec\n" +#endif + "smc #0 @ switch to secure world\n" + : "=r" (r0) + : "r" (r0), "r" (r1), "r" (r2) + : "r3"); + } while (r0 == QCOM_SCM_INTERRUPTED); + + return r0; +} + +static int __qcom_scm_call(const struct qcom_scm_command *cmd) +{ + int ret; + u32 cmd_addr = virt_to_phys(cmd); + + /* + * Flush the command buffer so that the secure world sees + * the correct data. + */ + __cpuc_flush_dcache_area((void *)cmd, cmd->len); + outer_flush_range(cmd_addr, cmd_addr + cmd->len); + + ret = smc(cmd_addr); + if (ret < 0) + ret = qcom_scm_remap_error(ret); + + return ret; +} + +static void qcom_scm_inv_range(unsigned long start, unsigned long end) +{ + u32 cacheline_size, ctr; + + asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr)); + cacheline_size = 4 << ((ctr >> 16) & 0xf); + + start = round_down(start, cacheline_size); + end = round_up(end, cacheline_size); + outer_inv_range(start, end); + while (start < end) { + asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start) + : "memory"); + start += cacheline_size; + } + dsb(); + isb(); +} + +/** + * qcom_scm_call() - Send an SCM command + * @svc_id: service identifier + * @cmd_id: command identifier + * @cmd_buf: command buffer + * @cmd_len: length of the command buffer + * @resp_buf: response buffer + * @resp_len: length of the response buffer + * + * Sends a command to the SCM and waits for the command to finish processing. + * + * A note on cache maintenance: + * Note that any buffers that are expected to be accessed by the secure world + * must be flushed before invoking qcom_scm_call and invalidated in the cache + * immediately after qcom_scm_call returns. Cache maintenance on the command + * and response buffers is taken care of by qcom_scm_call; however, callers are + * responsible for any other cached buffers passed over to the secure world. + */ +static int qcom_scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, + size_t cmd_len, void *resp_buf, size_t resp_len) +{ + int ret; + struct qcom_scm_command *cmd; + struct qcom_scm_response *rsp; + unsigned long start, end; + + cmd = alloc_qcom_scm_command(cmd_len, resp_len); + if (!cmd) + return -ENOMEM; + + cmd->id = cpu_to_le32((svc_id << 10) | cmd_id); + if (cmd_buf) + memcpy(qcom_scm_get_command_buffer(cmd), cmd_buf, cmd_len); + + mutex_lock(&qcom_scm_lock); + ret = __qcom_scm_call(cmd); + mutex_unlock(&qcom_scm_lock); + if (ret) + goto out; + + rsp = qcom_scm_command_to_response(cmd); + start = (unsigned long)rsp; + + do { + qcom_scm_inv_range(start, start + sizeof(*rsp)); + } while (!rsp->is_complete); + + end = (unsigned long)qcom_scm_get_response_buffer(rsp) + resp_len; + qcom_scm_inv_range(start, end); + + if (resp_buf) + memcpy(resp_buf, qcom_scm_get_response_buffer(rsp), resp_len); +out: + free_qcom_scm_command(cmd); + return ret; +} + +#define SCM_CLASS_REGISTER (0x2 << 8) +#define SCM_MASK_IRQS BIT(5) +#define SCM_ATOMIC(svc, cmd, n) (((((svc) << 10)|((cmd) & 0x3ff)) << 12) | \ + SCM_CLASS_REGISTER | \ + SCM_MASK_IRQS | \ + (n & 0xf)) + +/** + * qcom_scm_call_atomic1() - Send an atomic SCM command with one argument + * @svc_id: service identifier + * @cmd_id: command identifier + * @arg1: first argument + * + * This shall only be used with commands that are guaranteed to be + * uninterruptable, atomic and SMP safe. + */ +static s32 qcom_scm_call_atomic1(u32 svc, u32 cmd, u32 arg1) +{ + int context_id; + + register u32 r0 asm("r0") = SCM_ATOMIC(svc, cmd, 1); + register u32 r1 asm("r1") = (u32)&context_id; + register u32 r2 asm("r2") = arg1; + + asm volatile( + __asmeq("%0", "r0") + __asmeq("%1", "r0") + __asmeq("%2", "r1") + __asmeq("%3", "r2") +#ifdef REQUIRES_SEC + ".arch_extension sec\n" +#endif + "smc #0 @ switch to secure world\n" + : "=r" (r0) + : "r" (r0), "r" (r1), "r" (r2) + : "r3"); + return r0; +} + +u32 qcom_scm_get_version(void) +{ + int context_id; + static u32 version = -1; + register u32 r0 asm("r0"); + register u32 r1 asm("r1"); + + if (version != -1) + return version; + + mutex_lock(&qcom_scm_lock); + + r0 = 0x1 << 8; + r1 = (u32)&context_id; + do { + asm volatile( + __asmeq("%0", "r0") + __asmeq("%1", "r1") + __asmeq("%2", "r0") + __asmeq("%3", "r1") +#ifdef REQUIRES_SEC + ".arch_extension sec\n" +#endif + "smc #0 @ switch to secure world\n" + : "=r" (r0), "=r" (r1) + : "r" (r0), "r" (r1) + : "r2", "r3"); + } while (r0 == QCOM_SCM_INTERRUPTED); + + version = r1; + mutex_unlock(&qcom_scm_lock); + + return version; +} +EXPORT_SYMBOL(qcom_scm_get_version); + +#define QCOM_SCM_SVC_BOOT 0x1 +#define QCOM_SCM_BOOT_ADDR 0x1 +/* + * Set the cold/warm boot address for one of the CPU cores. + */ +static int qcom_scm_set_boot_addr(u32 addr, int flags) +{ + struct { + __le32 flags; + __le32 addr; + } cmd; + + cmd.addr = cpu_to_le32(addr); + cmd.flags = cpu_to_le32(flags); + return qcom_scm_call(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR, + &cmd, sizeof(cmd), NULL, 0); +} + +/** + * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus + * @entry: Entry point function for the cpus + * @cpus: The cpumask of cpus that will use the entry point + * + * Set the cold boot address of the cpus. Any cpu outside the supported + * range would be removed from the cpu present mask. + */ +int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus) +{ + int flags = 0; + int cpu; + int scm_cb_flags[] = { + QCOM_SCM_FLAG_COLDBOOT_CPU0, + QCOM_SCM_FLAG_COLDBOOT_CPU1, + QCOM_SCM_FLAG_COLDBOOT_CPU2, + QCOM_SCM_FLAG_COLDBOOT_CPU3, + }; + + if (!cpus || (cpus && cpumask_empty(cpus))) + return -EINVAL; + + for_each_cpu(cpu, cpus) { + if (cpu < ARRAY_SIZE(scm_cb_flags)) + flags |= scm_cb_flags[cpu]; + else + set_cpu_present(cpu, false); + } + + return qcom_scm_set_boot_addr(virt_to_phys(entry), flags); +} +EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr); + +/** + * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus + * @entry: Entry point function for the cpus + * @cpus: The cpumask of cpus that will use the entry point + * + * Set the Linux entry point for the SCM to transfer control to when coming + * out of a power down. CPU power down may be executed on cpuidle or hotplug. + */ +int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus) +{ + int ret; + int flags = 0; + int cpu; + + /* + * Reassign only if we are switching from hotplug entry point + * to cpuidle entry point or vice versa. + */ + for_each_cpu(cpu, cpus) { + if (entry == qcom_scm_wb[cpu].entry) + continue; + flags |= qcom_scm_wb[cpu].flag; + } + + /* No change in entry function */ + if (!flags) + return 0; + + ret = qcom_scm_set_boot_addr(virt_to_phys(entry), flags); + if (!ret) { + for_each_cpu(cpu, cpus) + qcom_scm_wb[cpu].entry = entry; + } + + return ret; +} +EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr); + +#define QCOM_SCM_CMD_TERMINATE_PC 0x2 +#define QCOM_SCM_FLUSH_FLAG_MASK 0x3 + +/** + * qcom_scm_cpu_power_down() - Power down the cpu + * @flags - Flags to flush cache + * + * This is an end point to power down cpu. If there was a pending interrupt, + * the control would return from this function, otherwise, the cpu jumps to the + * warm boot entry point set for this cpu upon reset. + */ +void qcom_scm_cpu_power_down(u32 flags) +{ + qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_CMD_TERMINATE_PC, + flags & QCOM_SCM_FLUSH_FLAG_MASK); +} +EXPORT_SYMBOL(qcom_scm_cpu_power_down); |