1 files changed, 109 insertions, 0 deletions
diff --git a/drivers/firmware/efi/libstub/riscv-stub.c b/drivers/firmware/efi/libstub/riscv-stub.c
new file mode 100644
index 000000000000..380e4e251399
--- /dev/null
+++ b/drivers/firmware/efi/libstub/riscv-stub.c
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+#include <linux/efi.h>
+#include <linux/libfdt.h>
+
+#include <asm/efi.h>
+#include <asm/sections.h>
+
+#include "efistub.h"
+
+/*
+ * RISC-V requires the kernel image to placed 2 MB aligned base for 64 bit and
+ * 4MB for 32 bit.
+ */
+#ifdef CONFIG_64BIT
+#define MIN_KIMG_ALIGN		SZ_2M
+#else
+#define MIN_KIMG_ALIGN		SZ_4M
+#endif
+
+typedef void __noreturn (*jump_kernel_func)(unsigned int, unsigned long);
+
+static u32 hartid;
+
+static u32 get_boot_hartid_from_fdt(void)
+{
+	const void *fdt;
+	int chosen_node, len;
+	const fdt32_t *prop;
+
+	fdt = get_efi_config_table(DEVICE_TREE_GUID);
+	if (!fdt)
+		return U32_MAX;
+
+	chosen_node = fdt_path_offset(fdt, "/chosen");
+	if (chosen_node < 0)
+		return U32_MAX;
+
+	prop = fdt_getprop((void *)fdt, chosen_node, "boot-hartid", &len);
+	if (!prop || len != sizeof(u32))
+		return U32_MAX;
+
+	return fdt32_to_cpu(*prop);
+}
+
+efi_status_t check_platform_features(void)
+{
+	hartid = get_boot_hartid_from_fdt();
+	if (hartid == U32_MAX) {
+		efi_err("/chosen/boot-hartid missing or invalid!\n");
+		return EFI_UNSUPPORTED;
+	}
+	return EFI_SUCCESS;
+}
+
+void __noreturn efi_enter_kernel(unsigned long entrypoint, unsigned long fdt,
+				 unsigned long fdt_size)
+{
+	unsigned long stext_offset = _start_kernel - _start;
+	unsigned long kernel_entry = entrypoint + stext_offset;
+	jump_kernel_func jump_kernel = (jump_kernel_func)kernel_entry;
+
+	/*
+	 * Jump to real kernel here with following constraints.
+	 * 1. MMU should be disabled.
+	 * 2. a0 should contain hartid
+	 * 3. a1 should DT address
+	 */
+	csr_write(CSR_SATP, 0);
+	jump_kernel(hartid, fdt);
+}
+
+efi_status_t handle_kernel_image(unsigned long *image_addr,
+				 unsigned long *image_size,
+				 unsigned long *reserve_addr,
+				 unsigned long *reserve_size,
+				 efi_loaded_image_t *image)
+{
+	unsigned long kernel_size = 0;
+	unsigned long preferred_addr;
+	efi_status_t status;
+
+	kernel_size = _edata - _start;
+	*image_addr = (unsigned long)_start;
+	*image_size = kernel_size + (_end - _edata);
+
+	/*
+	 * RISC-V kernel maps PAGE_OFFSET virtual address to the same physical
+	 * address where kernel is booted. That's why kernel should boot from
+	 * as low as possible to avoid wastage of memory. Currently, dram_base
+	 * is occupied by the firmware. So the preferred address for kernel to
+	 * boot is next aligned address. If preferred address is not available,
+	 * relocate_kernel will fall back to efi_low_alloc_above to allocate
+	 * lowest possible memory region as long as the address and size meets
+	 * the alignment constraints.
+	 */
+	preferred_addr = MIN_KIMG_ALIGN;
+	status = efi_relocate_kernel(image_addr, kernel_size, *image_size,
+				     preferred_addr, MIN_KIMG_ALIGN, 0x0);
+
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to relocate kernel\n");
+		*image_size = 0;
+	}
+	return status;
+}