diff options
Diffstat (limited to 'drivers/extcon')
-rw-r--r-- | drivers/extcon/extcon-axp288.c | 39 | ||||
-rw-r--r-- | drivers/extcon/extcon-usbc-cros-ec.c | 142 |
2 files changed, 142 insertions, 39 deletions
diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c index 981fba56bc18..1621f2f7f129 100644 --- a/drivers/extcon/extcon-axp288.c +++ b/drivers/extcon/extcon-axp288.c @@ -24,8 +24,6 @@ #include <linux/notifier.h> #include <linux/extcon-provider.h> #include <linux/regmap.h> -#include <linux/gpio.h> -#include <linux/gpio/consumer.h> #include <linux/mfd/axp20x.h> /* Power source status register */ @@ -79,11 +77,6 @@ enum axp288_extcon_reg { AXP288_BC_DET_STAT_REG = 0x2f, }; -enum axp288_mux_select { - EXTCON_GPIO_MUX_SEL_PMIC = 0, - EXTCON_GPIO_MUX_SEL_SOC, -}; - enum axp288_extcon_irq { VBUS_FALLING_IRQ = 0, VBUS_RISING_IRQ, @@ -104,10 +97,8 @@ struct axp288_extcon_info { struct device *dev; struct regmap *regmap; struct regmap_irq_chip_data *regmap_irqc; - struct gpio_desc *gpio_mux_cntl; int irq[EXTCON_IRQ_END]; struct extcon_dev *edev; - struct notifier_block extcon_nb; unsigned int previous_cable; }; @@ -197,15 +188,6 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) } no_vbus: - /* - * If VBUS is absent Connect D+/D- lines to PMIC for BC - * detection. Else connect them to SOC for USB communication. - */ - if (info->gpio_mux_cntl) - gpiod_set_value(info->gpio_mux_cntl, - vbus_attach ? EXTCON_GPIO_MUX_SEL_SOC - : EXTCON_GPIO_MUX_SEL_PMIC); - extcon_set_state_sync(info->edev, info->previous_cable, false); if (info->previous_cable == EXTCON_CHG_USB_SDP) extcon_set_state_sync(info->edev, EXTCON_USB, false); @@ -253,8 +235,7 @@ static int axp288_extcon_probe(struct platform_device *pdev) { struct axp288_extcon_info *info; struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); - struct axp288_extcon_pdata *pdata = pdev->dev.platform_data; - int ret, i, pirq, gpio; + int ret, i, pirq; info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); if (!info) @@ -264,8 +245,6 @@ static int axp288_extcon_probe(struct platform_device *pdev) info->regmap = axp20x->regmap; info->regmap_irqc = axp20x->regmap_irqc; info->previous_cable = EXTCON_NONE; - if (pdata) - info->gpio_mux_cntl = pdata->gpio_mux_cntl; platform_set_drvdata(pdev, info); @@ -286,21 +265,11 @@ static int axp288_extcon_probe(struct platform_device *pdev) return ret; } - /* Set up gpio control for USB Mux */ - if (info->gpio_mux_cntl) { - gpio = desc_to_gpio(info->gpio_mux_cntl); - ret = devm_gpio_request(&pdev->dev, gpio, "USB_MUX"); - if (ret < 0) { - dev_err(&pdev->dev, - "failed to request the gpio=%d\n", gpio); - return ret; - } - gpiod_direction_output(info->gpio_mux_cntl, - EXTCON_GPIO_MUX_SEL_PMIC); - } - for (i = 0; i < EXTCON_IRQ_END; i++) { pirq = platform_get_irq(pdev, i); + if (pirq < 0) + return pirq; + info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq); if (info->irq[i] < 0) { dev_err(&pdev->dev, diff --git a/drivers/extcon/extcon-usbc-cros-ec.c b/drivers/extcon/extcon-usbc-cros-ec.c index 6187f731b29d..6721ab01fe7d 100644 --- a/drivers/extcon/extcon-usbc-cros-ec.c +++ b/drivers/extcon/extcon-usbc-cros-ec.c @@ -34,16 +34,26 @@ struct cros_ec_extcon_info { struct notifier_block notifier; + unsigned int dr; /* data role */ + bool pr; /* power role (true if VBUS enabled) */ bool dp; /* DisplayPort enabled */ bool mux; /* SuperSpeed (usb3) enabled */ unsigned int power_type; }; static const unsigned int usb_type_c_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, EXTCON_DISP_DP, EXTCON_NONE, }; +enum usb_data_roles { + DR_NONE, + DR_HOST, + DR_DEVICE, +}; + /** * cros_ec_pd_command() - Send a command to the EC. * @info: pointer to struct cros_ec_extcon_info @@ -150,6 +160,7 @@ static int cros_ec_usb_get_role(struct cros_ec_extcon_info *info, pd_control.port = info->port_id; pd_control.role = USB_PD_CTRL_ROLE_NO_CHANGE; pd_control.mux = USB_PD_CTRL_MUX_NO_CHANGE; + pd_control.swap = USB_PD_CTRL_SWAP_NONE; ret = cros_ec_pd_command(info, EC_CMD_USB_PD_CONTROL, 1, &pd_control, sizeof(pd_control), &resp, sizeof(resp)); @@ -183,11 +194,72 @@ static int cros_ec_pd_get_num_ports(struct cros_ec_extcon_info *info) return resp.num_ports; } +static const char *cros_ec_usb_role_string(unsigned int role) +{ + return role == DR_NONE ? "DISCONNECTED" : + (role == DR_HOST ? "DFP" : "UFP"); +} + +static const char *cros_ec_usb_power_type_string(unsigned int type) +{ + switch (type) { + case USB_CHG_TYPE_NONE: + return "USB_CHG_TYPE_NONE"; + case USB_CHG_TYPE_PD: + return "USB_CHG_TYPE_PD"; + case USB_CHG_TYPE_PROPRIETARY: + return "USB_CHG_TYPE_PROPRIETARY"; + case USB_CHG_TYPE_C: + return "USB_CHG_TYPE_C"; + case USB_CHG_TYPE_BC12_DCP: + return "USB_CHG_TYPE_BC12_DCP"; + case USB_CHG_TYPE_BC12_CDP: + return "USB_CHG_TYPE_BC12_CDP"; + case USB_CHG_TYPE_BC12_SDP: + return "USB_CHG_TYPE_BC12_SDP"; + case USB_CHG_TYPE_OTHER: + return "USB_CHG_TYPE_OTHER"; + case USB_CHG_TYPE_VBUS: + return "USB_CHG_TYPE_VBUS"; + case USB_CHG_TYPE_UNKNOWN: + return "USB_CHG_TYPE_UNKNOWN"; + default: + return "USB_CHG_TYPE_UNKNOWN"; + } +} + +static bool cros_ec_usb_power_type_is_wall_wart(unsigned int type, + unsigned int role) +{ + switch (type) { + /* FIXME : Guppy, Donnettes, and other chargers will be miscategorized + * because they identify with USB_CHG_TYPE_C, but we can't return true + * here from that code because that breaks Suzy-Q and other kinds of + * USB Type-C cables and peripherals. + */ + case USB_CHG_TYPE_PROPRIETARY: + case USB_CHG_TYPE_BC12_DCP: + return true; + case USB_CHG_TYPE_PD: + case USB_CHG_TYPE_C: + case USB_CHG_TYPE_BC12_CDP: + case USB_CHG_TYPE_BC12_SDP: + case USB_CHG_TYPE_OTHER: + case USB_CHG_TYPE_VBUS: + case USB_CHG_TYPE_UNKNOWN: + case USB_CHG_TYPE_NONE: + default: + return false; + } +} + static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info, bool force) { struct device *dev = info->dev; int role, power_type; + unsigned int dr = DR_NONE; + bool pr = false; bool polarity = false; bool dp = false; bool mux = false; @@ -206,9 +278,12 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info, dev_err(dev, "failed getting role err = %d\n", role); return role; } + dev_dbg(dev, "disconnected\n"); } else { int pd_mux_state; + dr = (role & PD_CTRL_RESP_ROLE_DATA) ? DR_HOST : DR_DEVICE; + pr = (role & PD_CTRL_RESP_ROLE_POWER); pd_mux_state = cros_ec_usb_get_pd_mux_state(info); if (pd_mux_state < 0) pd_mux_state = USB_PD_MUX_USB_ENABLED; @@ -216,20 +291,62 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info, dp = pd_mux_state & USB_PD_MUX_DP_ENABLED; mux = pd_mux_state & USB_PD_MUX_USB_ENABLED; hpd = pd_mux_state & USB_PD_MUX_HPD_IRQ; - } - if (force || info->dp != dp || info->mux != mux || - info->power_type != power_type) { + dev_dbg(dev, + "connected role 0x%x pwr type %d dr %d pr %d pol %d mux %d dp %d hpd %d\n", + role, power_type, dr, pr, polarity, mux, dp, hpd); + } + /* + * When there is no USB host (e.g. USB PD charger), + * we are not really a UFP for the AP. + */ + if (dr == DR_DEVICE && + cros_ec_usb_power_type_is_wall_wart(power_type, role)) + dr = DR_NONE; + + if (force || info->dr != dr || info->pr != pr || info->dp != dp || + info->mux != mux || info->power_type != power_type) { + bool host_connected = false, device_connected = false; + + dev_dbg(dev, "Type/Role switch! type = %s role = %s\n", + cros_ec_usb_power_type_string(power_type), + cros_ec_usb_role_string(dr)); + info->dr = dr; + info->pr = pr; info->dp = dp; info->mux = mux; info->power_type = power_type; - extcon_set_state(info->edev, EXTCON_DISP_DP, dp); + if (dr == DR_DEVICE) + device_connected = true; + else if (dr == DR_HOST) + host_connected = true; + extcon_set_state(info->edev, EXTCON_USB, device_connected); + extcon_set_state(info->edev, EXTCON_USB_HOST, host_connected); + extcon_set_state(info->edev, EXTCON_DISP_DP, dp); + extcon_set_property(info->edev, EXTCON_USB, + EXTCON_PROP_USB_VBUS, + (union extcon_property_value)(int)pr); + extcon_set_property(info->edev, EXTCON_USB_HOST, + EXTCON_PROP_USB_VBUS, + (union extcon_property_value)(int)pr); + extcon_set_property(info->edev, EXTCON_USB, + EXTCON_PROP_USB_TYPEC_POLARITY, + (union extcon_property_value)(int)polarity); + extcon_set_property(info->edev, EXTCON_USB_HOST, + EXTCON_PROP_USB_TYPEC_POLARITY, + (union extcon_property_value)(int)polarity); extcon_set_property(info->edev, EXTCON_DISP_DP, EXTCON_PROP_USB_TYPEC_POLARITY, (union extcon_property_value)(int)polarity); + extcon_set_property(info->edev, EXTCON_USB, + EXTCON_PROP_USB_SS, + (union extcon_property_value)(int)mux); + extcon_set_property(info->edev, EXTCON_USB_HOST, + EXTCON_PROP_USB_SS, + (union extcon_property_value)(int)mux); extcon_set_property(info->edev, EXTCON_DISP_DP, EXTCON_PROP_USB_SS, (union extcon_property_value)(int)mux); @@ -237,6 +354,8 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info, EXTCON_PROP_DISP_HPD, (union extcon_property_value)(int)hpd); + extcon_sync(info->edev, EXTCON_USB); + extcon_sync(info->edev, EXTCON_USB_HOST); extcon_sync(info->edev, EXTCON_DISP_DP); } else if (hpd) { @@ -322,13 +441,28 @@ static int extcon_cros_ec_probe(struct platform_device *pdev) return ret; } + extcon_set_property_capability(info->edev, EXTCON_USB, + EXTCON_PROP_USB_VBUS); + extcon_set_property_capability(info->edev, EXTCON_USB_HOST, + EXTCON_PROP_USB_VBUS); + extcon_set_property_capability(info->edev, EXTCON_USB, + EXTCON_PROP_USB_TYPEC_POLARITY); + extcon_set_property_capability(info->edev, EXTCON_USB_HOST, + EXTCON_PROP_USB_TYPEC_POLARITY); extcon_set_property_capability(info->edev, EXTCON_DISP_DP, EXTCON_PROP_USB_TYPEC_POLARITY); + extcon_set_property_capability(info->edev, EXTCON_USB, + EXTCON_PROP_USB_SS); + extcon_set_property_capability(info->edev, EXTCON_USB_HOST, + EXTCON_PROP_USB_SS); extcon_set_property_capability(info->edev, EXTCON_DISP_DP, EXTCON_PROP_USB_SS); extcon_set_property_capability(info->edev, EXTCON_DISP_DP, EXTCON_PROP_DISP_HPD); + info->dr = DR_NONE; + info->pr = false; + platform_set_drvdata(pdev, info); /* Get PD events from the EC */ |