diff options
Diffstat (limited to 'drivers/clocksource')
| -rw-r--r-- | drivers/clocksource/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/clocksource/Makefile | 1 | ||||
| -rw-r--r-- | drivers/clocksource/timer-atmel-pit.c | 296 |
3 files changed, 301 insertions, 0 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index cfd6519df661..82a2ebe41e27 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -120,6 +120,10 @@ config CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK help Use ARM global timer clock source as sched_clock +config ATMEL_PIT + select CLKSRC_OF if OF + def_bool SOC_AT91SAM9 || SOC_SAMA5 + config CLKSRC_METAG_GENERIC def_bool y if METAG help diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 7fd9fd1dff42..e566f6c7ded4 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -1,4 +1,5 @@ obj-$(CONFIG_CLKSRC_OF) += clksrc-of.o +obj-$(CONFIG_ATMEL_PIT) += timer-atmel-pit.o obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_clksrc.o obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o diff --git a/drivers/clocksource/timer-atmel-pit.c b/drivers/clocksource/timer-atmel-pit.c new file mode 100644 index 000000000000..d5289098b3df --- /dev/null +++ b/drivers/clocksource/timer-atmel-pit.c @@ -0,0 +1,296 @@ +/* + * at91sam926x_time.c - Periodic Interval Timer (PIT) for at91sam926x + * + * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France + * Revision 2005 M. Nicolas Diremdjian, ATMEL Rousset, France + * Converted to ClockSource/ClockEvents by David Brownell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) "AT91: PIT: " fmt + +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/slab.h> + +#define AT91_PIT_MR 0x00 /* Mode Register */ +#define AT91_PIT_PITIEN BIT(25) /* Timer Interrupt Enable */ +#define AT91_PIT_PITEN BIT(24) /* Timer Enabled */ +#define AT91_PIT_PIV GENMASK(19, 0) /* Periodic Interval Value */ + +#define AT91_PIT_SR 0x04 /* Status Register */ +#define AT91_PIT_PITS BIT(0) /* Timer Status */ + +#define AT91_PIT_PIVR 0x08 /* Periodic Interval Value Register */ +#define AT91_PIT_PIIR 0x0c /* Periodic Interval Image Register */ +#define AT91_PIT_PICNT GENMASK(31, 20) /* Interval Counter */ +#define AT91_PIT_CPIV GENMASK(19, 0) /* Inverval Value */ + +#define PIT_CPIV(x) ((x) & AT91_PIT_CPIV) +#define PIT_PICNT(x) (((x) & AT91_PIT_PICNT) >> 20) + +struct pit_data { + struct clock_event_device clkevt; + struct clocksource clksrc; + + void __iomem *base; + u32 cycle; + u32 cnt; + unsigned int irq; + struct clk *mck; +}; + +static inline struct pit_data *clksrc_to_pit_data(struct clocksource *clksrc) +{ + return container_of(clksrc, struct pit_data, clksrc); +} + +static inline struct pit_data *clkevt_to_pit_data(struct clock_event_device *clkevt) +{ + return container_of(clkevt, struct pit_data, clkevt); +} + +static inline unsigned int pit_read(void __iomem *base, unsigned int reg_offset) +{ + return __raw_readl(base + reg_offset); +} + +static inline void pit_write(void __iomem *base, unsigned int reg_offset, unsigned long value) +{ + __raw_writel(value, base + reg_offset); +} + +/* + * Clocksource: just a monotonic counter of MCK/16 cycles. + * We don't care whether or not PIT irqs are enabled. + */ +static cycle_t read_pit_clk(struct clocksource *cs) +{ + struct pit_data *data = clksrc_to_pit_data(cs); + unsigned long flags; + u32 elapsed; + u32 t; + + raw_local_irq_save(flags); + elapsed = data->cnt; + t = pit_read(data->base, AT91_PIT_PIIR); + raw_local_irq_restore(flags); + + elapsed += PIT_PICNT(t) * data->cycle; + elapsed += PIT_CPIV(t); + return elapsed; +} + +/* + * Clockevent device: interrupts every 1/HZ (== pit_cycles * MCK/16) + */ +static void +pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) +{ + struct pit_data *data = clkevt_to_pit_data(dev); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + /* update clocksource counter */ + data->cnt += data->cycle * PIT_PICNT(pit_read(data->base, AT91_PIT_PIVR)); + pit_write(data->base, AT91_PIT_MR, + (data->cycle - 1) | AT91_PIT_PITEN | AT91_PIT_PITIEN); + break; + case CLOCK_EVT_MODE_ONESHOT: + BUG(); + /* FALLTHROUGH */ + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + /* disable irq, leaving the clocksource active */ + pit_write(data->base, AT91_PIT_MR, + (data->cycle - 1) | AT91_PIT_PITEN); + break; + case CLOCK_EVT_MODE_RESUME: + break; + } +} + +static void at91sam926x_pit_suspend(struct clock_event_device *cedev) +{ + struct pit_data *data = clkevt_to_pit_data(cedev); + + /* Disable timer */ + pit_write(data->base, AT91_PIT_MR, 0); +} + +static void at91sam926x_pit_reset(struct pit_data *data) +{ + /* Disable timer and irqs */ + pit_write(data->base, AT91_PIT_MR, 0); + + /* Clear any pending interrupts, wait for PIT to stop counting */ + while (PIT_CPIV(pit_read(data->base, AT91_PIT_PIVR)) != 0) + cpu_relax(); + + /* Start PIT but don't enable IRQ */ + pit_write(data->base, AT91_PIT_MR, + (data->cycle - 1) | AT91_PIT_PITEN); +} + +static void at91sam926x_pit_resume(struct clock_event_device *cedev) +{ + struct pit_data *data = clkevt_to_pit_data(cedev); + + at91sam926x_pit_reset(data); +} + +/* + * IRQ handler for the timer. + */ +static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id) +{ + struct pit_data *data = dev_id; + + /* + * irqs should be disabled here, but as the irq is shared they are only + * guaranteed to be off if the timer irq is registered first. + */ + WARN_ON_ONCE(!irqs_disabled()); + + /* The PIT interrupt may be disabled, and is shared */ + if ((data->clkevt.mode == CLOCK_EVT_MODE_PERIODIC) && + (pit_read(data->base, AT91_PIT_SR) & AT91_PIT_PITS)) { + unsigned nr_ticks; + + /* Get number of ticks performed before irq, and ack it */ + nr_ticks = PIT_PICNT(pit_read(data->base, AT91_PIT_PIVR)); + do { + data->cnt += data->cycle; + data->clkevt.event_handler(&data->clkevt); + nr_ticks--; + } while (nr_ticks); + + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +/* + * Set up both clocksource and clockevent support. + */ +static void __init at91sam926x_pit_common_init(struct pit_data *data) +{ + unsigned long pit_rate; + unsigned bits; + int ret; + + /* + * Use our actual MCK to figure out how many MCK/16 ticks per + * 1/HZ period (instead of a compile-time constant LATCH). + */ + pit_rate = clk_get_rate(data->mck) / 16; + data->cycle = DIV_ROUND_CLOSEST(pit_rate, HZ); + WARN_ON(((data->cycle - 1) & ~AT91_PIT_PIV) != 0); + + /* Initialize and enable the timer */ + at91sam926x_pit_reset(data); + + /* + * Register clocksource. The high order bits of PIV are unused, + * so this isn't a 32-bit counter unless we get clockevent irqs. + */ + bits = 12 /* PICNT */ + ilog2(data->cycle) /* PIV */; + data->clksrc.mask = CLOCKSOURCE_MASK(bits); + data->clksrc.name = "pit"; + data->clksrc.rating = 175; + data->clksrc.read = read_pit_clk, + data->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS, + clocksource_register_hz(&data->clksrc, pit_rate); + + /* Set up irq handler */ + ret = request_irq(data->irq, at91sam926x_pit_interrupt, + IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL, + "at91_tick", data); + if (ret) + panic(pr_fmt("Unable to setup IRQ\n")); + + /* Set up and register clockevents */ + data->clkevt.name = "pit"; + data->clkevt.features = CLOCK_EVT_FEAT_PERIODIC; + data->clkevt.shift = 32; + data->clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, data->clkevt.shift); + data->clkevt.rating = 100; + data->clkevt.cpumask = cpumask_of(0); + + data->clkevt.set_mode = pit_clkevt_mode; + data->clkevt.resume = at91sam926x_pit_resume; + data->clkevt.suspend = at91sam926x_pit_suspend; + clockevents_register_device(&data->clkevt); +} + +static void __init at91sam926x_pit_dt_init(struct device_node *node) +{ + struct pit_data *data; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + panic(pr_fmt("Unable to allocate memory\n")); + + data->base = of_iomap(node, 0); + if (!data->base) + panic(pr_fmt("Could not map PIT address\n")); + + data->mck = of_clk_get(node, 0); + if (IS_ERR(data->mck)) + /* Fallback on clkdev for !CCF-based boards */ + data->mck = clk_get(NULL, "mck"); + + if (IS_ERR(data->mck)) + panic(pr_fmt("Unable to get mck clk\n")); + + /* Get the interrupts property */ + data->irq = irq_of_parse_and_map(node, 0); + if (!data->irq) + panic(pr_fmt("Unable to get IRQ from DT\n")); + + at91sam926x_pit_common_init(data); +} +CLOCKSOURCE_OF_DECLARE(at91sam926x_pit, "atmel,at91sam9260-pit", + at91sam926x_pit_dt_init); + +static void __iomem *pit_base_addr; + +void __init at91sam926x_pit_init(int irq) +{ + struct pit_data *data; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + panic(pr_fmt("Unable to allocate memory\n")); + + data->base = pit_base_addr; + + data->mck = clk_get(NULL, "mck"); + if (IS_ERR(data->mck)) + panic(pr_fmt("Unable to get mck clk\n")); + + data->irq = irq; + + at91sam926x_pit_common_init(data); +} + +void __init at91sam926x_ioremap_pit(u32 addr) +{ + if (of_have_populated_dt()) + return; + + pit_base_addr = ioremap(addr, 16); + + if (!pit_base_addr) + panic(pr_fmt("Impossible to ioremap PIT\n")); +} |