diff options
Diffstat (limited to 'drivers/clocksource')
| -rw-r--r-- | drivers/clocksource/Kconfig | 26 | ||||
| -rw-r--r-- | drivers/clocksource/Makefile | 1 | ||||
| -rw-r--r-- | drivers/clocksource/arm_arch_timer.c | 144 | ||||
| -rw-r--r-- | drivers/clocksource/dw_apb_timer.c | 3 | ||||
| -rw-r--r-- | drivers/clocksource/dw_apb_timer_of.c | 2 | ||||
| -rw-r--r-- | drivers/clocksource/em_sti.c | 2 | ||||
| -rw-r--r-- | drivers/clocksource/mips-gic-timer.c | 13 | ||||
| -rw-r--r-- | drivers/clocksource/mtk_timer.c | 9 | ||||
| -rw-r--r-- | drivers/clocksource/pxa_timer.c | 2 | ||||
| -rw-r--r-- | drivers/clocksource/sh_cmt.c | 2 | ||||
| -rw-r--r-- | drivers/clocksource/sh_tmu.c | 2 | ||||
| -rw-r--r-- | drivers/clocksource/sun4i_timer.c | 10 | ||||
| -rw-r--r-- | drivers/clocksource/tegra20_timer.c | 19 | ||||
| -rw-r--r-- | drivers/clocksource/time-efm32.c | 6 | ||||
| -rw-r--r-- | drivers/clocksource/timer-atmel-pit.c | 4 | ||||
| -rw-r--r-- | drivers/clocksource/timer-atmel-st.c | 224 | ||||
| -rw-r--r-- | drivers/clocksource/timer-sun5i.c | 300 |
17 files changed, 622 insertions, 147 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 1c2506f68122..51d7865fdddb 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -63,6 +63,11 @@ config VT8500_TIMER config CADENCE_TTC_TIMER bool +config ASM9260_TIMER + bool + select CLKSRC_MMIO + select CLKSRC_OF + config CLKSRC_NOMADIK_MTU bool depends on (ARCH_NOMADIK || ARCH_U8500) @@ -138,6 +143,11 @@ config ATMEL_PIT select CLKSRC_OF if OF def_bool SOC_AT91SAM9 || SOC_SAMA5 +config ATMEL_ST + bool + select CLKSRC_OF + select MFD_SYSCON + config CLKSRC_METAG_GENERIC def_bool y if METAG help @@ -187,6 +197,7 @@ config SYS_SUPPORTS_EM_STI config SH_TIMER_CMT bool "Renesas CMT timer driver" if COMPILE_TEST depends on GENERIC_CLOCKEVENTS + depends on HAS_IOMEM default SYS_SUPPORTS_SH_CMT help This enables build of a clocksource and clockevent driver for @@ -196,6 +207,7 @@ config SH_TIMER_CMT config SH_TIMER_MTU2 bool "Renesas MTU2 timer driver" if COMPILE_TEST depends on GENERIC_CLOCKEVENTS + depends on HAS_IOMEM default SYS_SUPPORTS_SH_MTU2 help This enables build of a clockevent driver for the Multi-Function @@ -205,6 +217,7 @@ config SH_TIMER_MTU2 config SH_TIMER_TMU bool "Renesas TMU timer driver" if COMPILE_TEST depends on GENERIC_CLOCKEVENTS + depends on HAS_IOMEM default SYS_SUPPORTS_SH_TMU help This enables build of a clocksource and clockevent driver for @@ -225,7 +238,7 @@ config CLKSRC_QCOM config CLKSRC_VERSATILE bool "ARM Versatile (Express) reference platforms clock source" - depends on GENERIC_SCHED_CLOCK && !ARCH_USES_GETTIMEOFFSET + depends on PLAT_VERSATILE && GENERIC_SCHED_CLOCK && !ARCH_USES_GETTIMEOFFSET select CLKSRC_OF default y if MFD_VEXPRESS_SYSREG help @@ -245,15 +258,4 @@ config CLKSRC_PXA help This enables OST0 support available on PXA and SA-11x0 platforms. - -config ASM9260_TIMER - bool "Alphascale ASM9260 timer driver" - depends on GENERIC_CLOCKEVENTS - select CLKSRC_MMIO - select CLKSRC_OF - default y if MACH_ASM9260 - help - This enables build of a clocksource and clockevent driver for - the 32-bit System Timer hardware available on a Alphascale ASM9260. - endmenu diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 752d5c70b0ef..5b85f6adb258 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -1,5 +1,6 @@ obj-$(CONFIG_CLKSRC_OF) += clksrc-of.o obj-$(CONFIG_ATMEL_PIT) += timer-atmel-pit.o +obj-$(CONFIG_ATMEL_ST) += timer-atmel-st.o obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_clksrc.o obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index a3025e7ae35f..0aa135ddbf80 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -22,6 +22,7 @@ #include <linux/io.h> #include <linux/slab.h> #include <linux/sched_clock.h> +#include <linux/acpi.h> #include <asm/arch_timer.h> #include <asm/virt.h> @@ -371,8 +372,12 @@ arch_timer_detect_rate(void __iomem *cntbase, struct device_node *np) if (arch_timer_rate) return; - /* Try to determine the frequency from the device tree or CNTFRQ */ - if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) { + /* + * Try to determine the frequency from the device tree or CNTFRQ, + * if ACPI is enabled, get the frequency from CNTFRQ ONLY. + */ + if (!acpi_disabled || + of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) { if (cntbase) arch_timer_rate = readl_relaxed(cntbase + CNTFRQ); else @@ -661,17 +666,17 @@ static const struct of_device_id arch_timer_mem_of_match[] __initconst = { }; static bool __init -arch_timer_probed(int type, const struct of_device_id *matches) +arch_timer_needs_probing(int type, const struct of_device_id *matches) { struct device_node *dn; - bool probed = true; + bool needs_probing = false; dn = of_find_matching_node(NULL, matches); if (dn && of_device_is_available(dn) && !(arch_timers_present & type)) - probed = false; + needs_probing = true; of_node_put(dn); - return probed; + return needs_probing; } static void __init arch_timer_common_init(void) @@ -680,9 +685,9 @@ static void __init arch_timer_common_init(void) /* Wait until both nodes are probed if we have two timers */ if ((arch_timers_present & mask) != mask) { - if (!arch_timer_probed(ARCH_MEM_TIMER, arch_timer_mem_of_match)) + if (arch_timer_needs_probing(ARCH_MEM_TIMER, arch_timer_mem_of_match)) return; - if (!arch_timer_probed(ARCH_CP15_TIMER, arch_timer_of_match)) + if (arch_timer_needs_probing(ARCH_CP15_TIMER, arch_timer_of_match)) return; } @@ -691,28 +696,8 @@ static void __init arch_timer_common_init(void) arch_timer_arch_init(); } -static void __init arch_timer_init(struct device_node *np) +static void __init arch_timer_init(void) { - int i; - - if (arch_timers_present & ARCH_CP15_TIMER) { - pr_warn("arch_timer: multiple nodes in dt, skipping\n"); - return; - } - - arch_timers_present |= ARCH_CP15_TIMER; - for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++) - arch_timer_ppi[i] = irq_of_parse_and_map(np, i); - arch_timer_detect_rate(NULL, np); - - /* - * If we cannot rely on firmware initializing the timer registers then - * we should use the physical timers instead. - */ - if (IS_ENABLED(CONFIG_ARM) && - of_property_read_bool(np, "arm,cpu-registers-not-fw-configured")) - arch_timer_use_virtual = false; - /* * If HYP mode is available, we know that the physical timer * has been configured to be accessible from PL1. Use it, so @@ -731,13 +716,39 @@ static void __init arch_timer_init(struct device_node *np) } } - arch_timer_c3stop = !of_property_read_bool(np, "always-on"); - arch_timer_register(); arch_timer_common_init(); } -CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_init); -CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_init); + +static void __init arch_timer_of_init(struct device_node *np) +{ + int i; + + if (arch_timers_present & ARCH_CP15_TIMER) { + pr_warn("arch_timer: multiple nodes in dt, skipping\n"); + return; + } + + arch_timers_present |= ARCH_CP15_TIMER; + for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++) + arch_timer_ppi[i] = irq_of_parse_and_map(np, i); + + arch_timer_detect_rate(NULL, np); + + arch_timer_c3stop = !of_property_read_bool(np, "always-on"); + + /* + * If we cannot rely on firmware initializing the timer registers then + * we should use the physical timers instead. + */ + if (IS_ENABLED(CONFIG_ARM) && + of_property_read_bool(np, "arm,cpu-registers-not-fw-configured")) + arch_timer_use_virtual = false; + + arch_timer_init(); +} +CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_of_init); +CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_of_init); static void __init arch_timer_mem_init(struct device_node *np) { @@ -804,3 +815,70 @@ static void __init arch_timer_mem_init(struct device_node *np) } CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem", arch_timer_mem_init); + +#ifdef CONFIG_ACPI +static int __init map_generic_timer_interrupt(u32 interrupt, u32 flags) +{ + int trigger, polarity; + + if (!interrupt) + return 0; + + trigger = (flags & ACPI_GTDT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE + : ACPI_LEVEL_SENSITIVE; + + polarity = (flags & ACPI_GTDT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW + : ACPI_ACTIVE_HIGH; + + return acpi_register_gsi(NULL, interrupt, trigger, polarity); +} + +/* Initialize per-processor generic timer */ +static int __init arch_timer_acpi_init(struct acpi_table_header *table) +{ + struct acpi_table_gtdt *gtdt; + + if (arch_timers_present & ARCH_CP15_TIMER) { + pr_warn("arch_timer: already initialized, skipping\n"); + return -EINVAL; + } + + gtdt = container_of(table, struct acpi_table_gtdt, header); + + arch_timers_present |= ARCH_CP15_TIMER; + + arch_timer_ppi[PHYS_SECURE_PPI] = + map_generic_timer_interrupt(gtdt->secure_el1_interrupt, + gtdt->secure_el1_flags); + + arch_timer_ppi[PHYS_NONSECURE_PPI] = + map_generic_timer_interrupt(gtdt->non_secure_el1_interrupt, + gtdt->non_secure_el1_flags); + + arch_timer_ppi[VIRT_PPI] = + map_generic_timer_interrupt(gtdt->virtual_timer_interrupt, + gtdt->virtual_timer_flags); + + arch_timer_ppi[HYP_PPI] = + map_generic_timer_interrupt(gtdt->non_secure_el2_interrupt, + gtdt->non_secure_el2_flags); + + /* Get the frequency from CNTFRQ */ + arch_timer_detect_rate(NULL, NULL); + + /* Always-on capability */ + arch_timer_c3stop = !(gtdt->non_secure_el1_flags & ACPI_GTDT_ALWAYS_ON); + + arch_timer_init(); + return 0; +} + +/* Initialize all the generic timers presented in GTDT */ +void __init acpi_generic_timer_init(void) +{ + if (acpi_disabled) + return; + + acpi_table_parse(ACPI_SIG_GTDT, arch_timer_acpi_init); +} +#endif diff --git a/drivers/clocksource/dw_apb_timer.c b/drivers/clocksource/dw_apb_timer.c index f3656a6b0382..35a88097af3c 100644 --- a/drivers/clocksource/dw_apb_timer.c +++ b/drivers/clocksource/dw_apb_timer.c @@ -117,7 +117,8 @@ static void apbt_set_mode(enum clock_event_mode mode, unsigned long period; struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt); - pr_debug("%s CPU %d mode=%d\n", __func__, first_cpu(*evt->cpumask), + pr_debug("%s CPU %d mode=%d\n", __func__, + cpumask_first(evt->cpumask), mode); switch (mode) { diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c index d305fb089767..a19a3f619cc7 100644 --- a/drivers/clocksource/dw_apb_timer_of.c +++ b/drivers/clocksource/dw_apb_timer_of.c @@ -108,7 +108,7 @@ static void __init add_clocksource(struct device_node *source_timer) static u64 notrace read_sched_clock(void) { - return ~__raw_readl(sched_io_base); + return ~readl_relaxed(sched_io_base); } static const struct of_device_id sptimer_ids[] __initconst = { diff --git a/drivers/clocksource/em_sti.c b/drivers/clocksource/em_sti.c index d0a7bd66b8b9..dc3c6ee04aaa 100644 --- a/drivers/clocksource/em_sti.c +++ b/drivers/clocksource/em_sti.c @@ -210,7 +210,7 @@ static int em_sti_clocksource_enable(struct clocksource *cs) ret = em_sti_start(p, USER_CLOCKSOURCE); if (!ret) - __clocksource_updatefreq_hz(cs, p->rate); + __clocksource_update_freq_hz(cs, p->rate); return ret; } diff --git a/drivers/clocksource/mips-gic-timer.c b/drivers/clocksource/mips-gic-timer.c index 3bd31b1321f6..b81ed1a5342d 100644 --- a/drivers/clocksource/mips-gic-timer.c +++ b/drivers/clocksource/mips-gic-timer.c @@ -5,6 +5,7 @@ * * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. */ +#include <linux/clk.h> #include <linux/clockchips.h> #include <linux/cpu.h> #include <linux/init.h> @@ -133,6 +134,9 @@ static void __init __gic_clocksource_init(void) clocksource_register_hz(&gic_clocksource, gic_frequency); gic_clockevent_init(); + + /* And finally start the counter */ + gic_start_count(); } void __init gic_clocksource_init(unsigned int frequency) @@ -146,11 +150,18 @@ void __init gic_clocksource_init(unsigned int frequency) static void __init gic_clocksource_of_init(struct device_node *node) { + struct clk *clk; + if (WARN_ON(!gic_present || !node->parent || !of_device_is_compatible(node->parent, "mti,gic"))) return; - if (of_property_read_u32(node, "clock-frequency", &gic_frequency)) { + clk = of_clk_get(node, 0); + if (!IS_ERR(clk)) { + gic_frequency = clk_get_rate(clk); + clk_put(clk); + } else if (of_property_read_u32(node, "clock-frequency", + &gic_frequency)) { pr_err("GIC frequency not specified.\n"); return; } diff --git a/drivers/clocksource/mtk_timer.c b/drivers/clocksource/mtk_timer.c index 32a3d25795d3..68ab42356d0e 100644 --- a/drivers/clocksource/mtk_timer.c +++ b/drivers/clocksource/mtk_timer.c @@ -224,6 +224,8 @@ static void __init mtk_timer_init(struct device_node *node) } rate = clk_get_rate(clk); + mtk_timer_global_reset(evt); + if (request_irq(evt->dev.irq, mtk_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL, "mtk_timer", evt)) { pr_warn("failed to setup irq %d\n", evt->dev.irq); @@ -232,8 +234,6 @@ static void __init mtk_timer_init(struct device_node *node) evt->ticks_per_jiffy = DIV_ROUND_UP(rate, HZ); - mtk_timer_global_reset(evt); - /* Configure clock source */ mtk_timer_setup(evt, GPT_CLK_SRC, TIMER_CTRL_OP_FREERUN); clocksource_mmio_init(evt->gpt_base + TIMER_CNT_REG(GPT_CLK_SRC), @@ -241,10 +241,11 @@ static void __init mtk_timer_init(struct device_node *node) /* Configure clock event */ mtk_timer_setup(evt, GPT_CLK_EVT, TIMER_CTRL_OP_REPEAT); - mtk_timer_enable_irq(evt, GPT_CLK_EVT); - clockevents_config_and_register(&evt->dev, rate, 0x3, 0xffffffff); + + mtk_timer_enable_irq(evt, GPT_CLK_EVT); + return; err_clk_disable: diff --git a/drivers/clocksource/pxa_timer.c b/drivers/clocksource/pxa_timer.c index 941f3f344e08..d9438af2bbd6 100644 --- a/drivers/clocksource/pxa_timer.c +++ b/drivers/clocksource/pxa_timer.c @@ -163,7 +163,7 @@ static struct irqaction pxa_ost0_irq = { .dev_id = &ckevt_pxa_osmr0, }; -static void pxa_timer_common_init(int irq, unsigned long clock_tick_rate) +static void __init pxa_timer_common_init(int irq, unsigned long clock_tick_rate) { timer_writel(0, OIER); timer_writel(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR); diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index 2bd13b53b727..b8ff3c64cc45 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -641,7 +641,7 @@ static int sh_cmt_clocksource_enable(struct clocksource *cs) ret = sh_cmt_start(ch, FLAG_CLOCKSOURCE); if (!ret) { - __clocksource_updatefreq_hz(cs, ch->rate); + __clocksource_update_freq_hz(cs, ch->rate); ch->cs_enabled = true; } return ret; diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index f150ca82bfaf..b6b8fa3cd211 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -272,7 +272,7 @@ static int sh_tmu_clocksource_enable(struct clocksource *cs) ret = sh_tmu_enable(ch); if (!ret) { - __clocksource_updatefreq_hz(cs, ch->rate); + __clocksource_update_freq_hz(cs, ch->rate); ch->cs_enabled = true; } diff --git a/drivers/clocksource/sun4i_timer.c b/drivers/clocksource/sun4i_timer.c index f4a9c0058b4d..1928a8912584 100644 --- a/drivers/clocksource/sun4i_timer.c +++ b/drivers/clocksource/sun4i_timer.c @@ -170,7 +170,15 @@ static void __init sun4i_timer_init(struct device_node *node) TIMER_CTL_CLK_SRC(TIMER_CTL_CLK_SRC_OSC24M), timer_base + TIMER_CTL_REG(1)); - sched_clock_register(sun4i_timer_sched_read, 32, rate); + /* + * sched_clock_register does not have priorities, and on sun6i and + * later there is a better sched_clock registered by arm_arch_timer.c + */ + if (of_machine_is_compatible("allwinner,sun4i-a10") || + of_machine_is_compatible("allwinner,sun5i-a13") || + of_machine_is_compatible("allwinner,sun5i-a10s")) + sched_clock_register(sun4i_timer_sched_read, 32, rate); + clocksource_mmio_init(timer_base + TIMER_CNTVAL_REG(1), node->name, rate, 350, 32, clocksource_mmio_readl_down); diff --git a/drivers/clocksource/tegra20_timer.c b/drivers/clocksource/tegra20_timer.c index d2616ef16770..5a112d72fc2d 100644 --- a/drivers/clocksource/tegra20_timer.c +++ b/drivers/clocksource/tegra20_timer.c @@ -51,15 +51,15 @@ static void __iomem *timer_reg_base; static void __iomem *rtc_base; -static struct timespec persistent_ts; +static struct timespec64 persistent_ts; static u64 persistent_ms, last_persistent_ms; static struct delay_timer tegra_delay_timer; #define timer_writel(value, reg) \ - __raw_writel(value, timer_reg_base + (reg)) + writel_relaxed(value, timer_reg_base + (reg)) #define timer_readl(reg) \ - __raw_readl(timer_reg_base + (reg)) + readl_relaxed(timer_reg_base + (reg)) static int tegra_timer_set_next_event(unsigned long cycles, struct clock_event_device *evt) @@ -120,26 +120,25 @@ static u64 tegra_rtc_read_ms(void) } /* - * tegra_read_persistent_clock - Return time from a persistent clock. + * tegra_read_persistent_clock64 - Return time from a persistent clock. * * Reads the time from a source which isn't disabled during PM, the * 32k sync timer. Convert the cycles elapsed since last read into - * nsecs and adds to a monotonically increasing timespec. + * nsecs and adds to a monotonically increasing timespec64. * Care must be taken that this funciton is not called while the * tegra_rtc driver could be executing to avoid race conditions * on the RTC shadow register */ -static void tegra_read_persistent_clock(struct timespec *ts) +static void tegra_read_persistent_clock64(struct timespec64 *ts) { u64 delta; - struct timespec *tsp = &persistent_ts; last_persistent_ms = persistent_ms; persistent_ms = tegra_rtc_read_ms(); delta = persistent_ms - last_persistent_ms; - timespec_add_ns(tsp, delta * NSEC_PER_MSEC); - *ts = *tsp; + timespec64_add_ns(&persistent_ts, delta * NSEC_PER_MSEC); + *ts = persistent_ts; } static unsigned long tegra_delay_timer_read_counter_long(void) @@ -252,7 +251,7 @@ static void __init tegra20_init_rtc(struct device_node *np) else clk_prepare_enable(clk); - register_persistent_clock(NULL, tegra_read_persistent_clock); + register_persistent_clock(NULL, tegra_read_persistent_clock64); } CLOCKSOURCE_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc); diff --git a/drivers/clocksource/time-efm32.c b/drivers/clocksource/time-efm32.c index bba62f9deefb..5b6e3d5644c9 100644 --- a/drivers/clocksource/time-efm32.c +++ b/drivers/clocksource/time-efm32.c @@ -111,7 +111,7 @@ static irqreturn_t efm32_clock_event_handler(int irq, void *dev_id) static struct efm32_clock_event_ddata clock_event_ddata = { .evtdev = { .name = "efm32 clockevent", - .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_MODE_PERIODIC, + .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, .set_mode = efm32_clock_event_set_mode, .set_next_event = efm32_clock_event_set_next_event, .rating = 200, @@ -225,12 +225,12 @@ static int __init efm32_clockevent_init(struct device_node *np) clock_event_ddata.base = base; clock_event_ddata.periodic_top = DIV_ROUND_CLOSEST(rate, 1024 * HZ); - setup_irq(irq, &efm32_clock_event_irq); - clockevents_config_and_register(&clock_event_ddata.evtdev, DIV_ROUND_CLOSEST(rate, 1024), 0xf, 0xffff); + setup_irq(irq, &efm32_clock_event_irq); + return 0; err_get_irq: diff --git a/drivers/clocksource/timer-atmel-pit.c b/drivers/clocksource/timer-atmel-pit.c index b5b4d4585c9a..c0304ff608b0 100644 --- a/drivers/clocksource/timer-atmel-pit.c +++ b/drivers/clocksource/timer-atmel-pit.c @@ -61,12 +61,12 @@ static inline struct pit_data *clkevt_to_pit_data(struct clock_event_device *clk static inline unsigned int pit_read(void __iomem *base, unsigned int reg_offset) { - return __raw_readl(base + reg_offset); + return readl_relaxed(base + reg_offset); } static inline void pit_write(void __iomem *base, unsigned int reg_offset, unsigned long value) { - __raw_writel(value, base + reg_offset); + writel_relaxed(value, base + reg_offset); } /* diff --git a/drivers/clocksource/timer-atmel-st.c b/drivers/clocksource/timer-atmel-st.c new file mode 100644 index 000000000000..1692e17e096b --- /dev/null +++ b/drivers/clocksource/timer-atmel-st.c @@ -0,0 +1,224 @@ +/* + * linux/arch/arm/mach-at91/at91rm9200_time.c + * + * Copyright (C) 2003 SAN People + * Copyright (C) 2003 ATMEL + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/clockchips.h> +#include <linux/export.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/atmel-st.h> +#include <linux/of_irq.h> +#include <linux/regmap.h> + +static unsigned long last_crtr; +static u32 irqmask; +static struct clock_event_device clkevt; +static struct regmap *regmap_st; + +#define AT91_SLOW_CLOCK 32768 +#define RM9200_TIMER_LATCH ((AT91_SLOW_CLOCK + HZ/2) / HZ) + +/* + * The ST_CRTR is updated asynchronously to the master clock ... but + * the updates as seen by the CPU don't seem to be strictly monotonic. + * Waiting until we read the same value twice avoids glitching. + */ +static inline unsigned long read_CRTR(void) +{ + unsigned int x1, x2; + + regmap_read(regmap_st, AT91_ST_CRTR, &x1); + do { + regmap_read(regmap_st, AT91_ST_CRTR, &x2); + if (x1 == x2) + break; + x1 = x2; + } while (1); + return x1; +} + +/* + * IRQ handler for the timer. + */ +static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id) +{ + u32 sr; + + regmap_read(regmap_st, AT91_ST_SR, &sr); + sr &= irqmask; + + /* + * irqs should be disabled here, but as the irq is shared they are only + * guaranteed to be off if the timer irq is registered first. + */ + WARN_ON_ONCE(!irqs_disabled()); + + /* simulate "oneshot" timer with alarm */ + if (sr & AT91_ST_ALMS) { + clkevt.event_handler(&clkevt); + return IRQ_HANDLED; + } + + /* periodic mode should handle delayed ticks */ + if (sr & AT91_ST_PITS) { + u32 crtr = read_CRTR(); + + while (((crtr - last_crtr) & AT91_ST_CRTV) >= RM9200_TIMER_LATCH) { + last_crtr += RM9200_TIMER_LATCH; + clkevt.event_handler(&clkevt); + } + return IRQ_HANDLED; + } + + /* this irq is shared ... */ + return IRQ_NONE; +} + +static cycle_t read_clk32k(struct clocksource *cs) +{ + return read_CRTR(); +} + +static struct clocksource clk32k = { + .name = "32k_counter", + .rating = 150, + .read = read_clk32k, + .mask = CLOCKSOURCE_MASK(20), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static void +clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev) +{ + unsigned int val; + + /* Disable and flush pending timer interrupts */ + regmap_write(regmap_st, AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS); + regmap_read(regmap_st, AT91_ST_SR, &val); + + last_crtr = read_CRTR(); + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + /* PIT for periodic irqs; fixed rate of 1/HZ */ + irqmask = AT91_ST_PITS; + regmap_write(regmap_st, AT91_ST_PIMR, RM9200_TIMER_LATCH); + break; + case CLOCK_EVT_MODE_ONESHOT: + /* ALM for oneshot irqs, set by next_event() + * before 32 seconds have passed + */ + irqmask = AT91_ST_ALMS; + regmap_write(regmap_st, AT91_ST_RTAR, last_crtr); + break; + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_RESUME: + irqmask = 0; + break; + } + regmap_write(regmap_st, AT91_ST_IER, irqmask); +} + +static int +clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev) +{ + u32 alm; + int status = 0; + unsigned int val; + + BUG_ON(delta < 2); + + /* The alarm IRQ uses absolute time (now+delta), not the relative + * time (delta) in our calling convention. Like all clockevents + * using such "match" hardware, we have a race to defend against. + * + * Our defense here is to have set up the clockevent device so the + * delta is at least two. That way we never end up writing RTAR + * with the value then held in CRTR ... which would mean the match + * wouldn't trigger until 32 seconds later, after CRTR wraps. + */ + alm = read_CRTR(); + + /* Cancel any pending alarm; flush any pending IRQ */ + regmap_write(regmap_st, AT91_ST_RTAR, alm); + regmap_read(regmap_st, AT91_ST_SR, &val); + + /* Schedule alarm by writing RTAR. */ + alm += delta; + regmap_write(regmap_st, AT91_ST_RTAR, alm); + + return status; +} + +static struct clock_event_device clkevt = { + .name = "at91_tick", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .rating = 150, + .set_next_event = clkevt32k_next_event, + .set_mode = clkevt32k_mode, +}; + +/* + * ST (system timer) module supports both clockevents and clocksource. + */ +static void __init atmel_st_timer_init(struct device_node *node) +{ + unsigned int val; + int irq, ret; + + regmap_st = syscon_node_to_regmap(node); + if (IS_ERR(regmap_st)) + panic(pr_fmt("Unable to get regmap\n")); + + /* Disable all timer interrupts, and clear any pending ones */ + regmap_write(regmap_st, AT91_ST_IDR, + AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS); + regmap_read(regmap_st, AT91_ST_SR, &val); + + /* Get the interrupts property */ + irq = irq_of_parse_and_map(node, 0); + if (!irq) + panic(pr_fmt("Unable to get IRQ from DT\n")); + + /* Make IRQs happen for the system timer */ + ret = request_irq(irq, at91rm9200_timer_interrupt, + IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL, + "at91_tick", regmap_st); + if (ret) + panic(pr_fmt("Unable to setup IRQ\n")); + + /* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used + * directly for the clocksource and all clockevents, after adjusting + * its prescaler from the 1 Hz default. + */ + regmap_write(regmap_st, AT91_ST_RTMR, 1); + + /* Setup timer clockevent, with minimum of two ticks (important!!) */ + clkevt.cpumask = cpumask_of(0); + clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK, + 2, AT91_ST_ALMV); + + /* register clocksource */ + clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK); +} +CLOCKSOURCE_OF_DECLARE(atmel_st_timer, "atmel,at91rm9200-st", + atmel_st_timer_init); diff --git a/drivers/clocksource/timer-sun5i.c b/drivers/clocksource/timer-sun5i.c index 02268448dc85..28aa4b7bb602 100644 --- a/drivers/clocksource/timer-sun5i.c +++ b/drivers/clocksource/timer-sun5i.c @@ -17,7 +17,7 @@ #include <linux/irq.h> #include <linux/irqreturn.h> #include <linux/reset.h> -#include <linux/sched_clock.h> +#include <linux/slab.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> @@ -37,8 +37,31 @@ #define TIMER_SYNC_TICKS 3 -static void __iomem *timer_base; -static u32 ticks_per_jiffy; +struct sun5i_timer { + void __iomem *base; + struct clk *clk; + struct notifier_block clk_rate_cb; + u32 ticks_per_jiffy; +}; + +#define to_sun5i_timer(x) \ + container_of(x, struct sun5i_timer, clk_rate_cb) + +struct sun5i_timer_clksrc { + struct sun5i_timer timer; + struct clocksource clksrc; +}; + +#define to_sun5i_timer_clksrc(x) \ + container_of(x, struct sun5i_timer_clksrc, clksrc) + +struct sun5i_timer_clkevt { + struct sun5i_timer timer; + struct clock_event_device clkevt; +}; + +#define to_sun5i_timer_clkevt(x) \ + container_of(x, struct sun5i_timer_clkevt, clkevt) /* * When we disable a timer, we need to wait at least for 2 cycles of @@ -46,30 +69,30 @@ static u32 ticks_per_jiffy; * that is already setup and runs at the same frequency than the other * timers, and we never will be disabled. */ -static void sun5i_clkevt_sync(void) +static void sun5i_clkevt_sync(struct sun5i_timer_clkevt *ce) { - u32 old = readl(timer_base + TIMER_CNTVAL_LO_REG(1)); + u32 old = readl(ce->timer.base + TIMER_CNTVAL_LO_REG(1)); - while ((old - readl(timer_base + TIMER_CNTVAL_LO_REG(1))) < TIMER_SYNC_TICKS) + while ((old - readl(ce->timer.base + TIMER_CNTVAL_LO_REG(1))) < TIMER_SYNC_TICKS) cpu_relax(); } -static void sun5i_clkevt_time_stop(u8 timer) +static void sun5i_clkevt_time_stop(struct sun5i_timer_clkevt *ce, u8 timer) { - u32 val = readl(timer_base + TIMER_CTL_REG(timer)); - writel(val & ~TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(timer)); + u32 val = readl(ce->timer.base + TIMER_CTL_REG(timer)); + writel(val & ~TIMER_CTL_ENABLE, ce->timer.base + TIMER_CTL_REG(timer)); - sun5i_clkevt_sync(); + sun5i_clkevt_sync(ce); } -static void sun5i_clkevt_time_setup(u8 timer, u32 delay) +static void sun5i_clkevt_time_setup(struct sun5i_timer_clkevt *ce, u8 timer, u32 delay) { - writel(delay, timer_base + TIMER_INTVAL_LO_REG(timer)); + writel(delay, ce->timer.base + TIMER_INTVAL_LO_REG(timer)); } -static void sun5i_clkevt_time_start(u8 timer, bool periodic) +static void sun5i_clkevt_time_start(struct sun5i_timer_clkevt *ce, u8 timer, bool periodic) { - u32 val = readl(timer_base + TIMER_CTL_REG(timer)); + u32 val = readl(ce->timer.base + TIMER_CTL_REG(timer)); if (periodic) val &= ~TIMER_CTL_ONESHOT; @@ -77,80 +100,230 @@ static void sun5i_clkevt_time_start(u8 timer, bool periodic) val |= TIMER_CTL_ONESHOT; writel(val | TIMER_CTL_ENABLE | TIMER_CTL_RELOAD, - timer_base + TIMER_CTL_REG(timer)); + ce->timer.base + TIMER_CTL_REG(timer)); } static void sun5i_clkevt_mode(enum clock_event_mode mode, - struct clock_event_device *clk) + struct clock_event_device *clkevt) { + struct sun5i_timer_clkevt *ce = to_sun5i_timer_clkevt(clkevt); + switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - sun5i_clkevt_time_stop(0); - sun5i_clkevt_time_setup(0, ticks_per_jiffy); - sun5i_clkevt_time_start(0, true); + sun5i_clkevt_time_stop(ce, 0); + sun5i_clkevt_time_setup(ce, 0, ce->timer.ticks_per_jiffy); + sun5i_clkevt_time_start(ce, 0, true); break; case CLOCK_EVT_MODE_ONESHOT: - sun5i_clkevt_time_stop(0); - sun5i_clkevt_time_start(0, false); + sun5i_clkevt_time_stop(ce, 0); + sun5i_clkevt_time_start(ce, 0, false); break; case CLOCK_EVT_MODE_UNUSED: case CLOCK_EVT_MODE_SHUTDOWN: default: - sun5i_clkevt_time_stop(0); + sun5i_clkevt_time_stop(ce, 0); break; } } static int sun5i_clkevt_next_event(unsigned long evt, - struct clock_event_device *unused) + struct clock_event_device *clkevt) { - sun5i_clkevt_time_stop(0); - sun5i_clkevt_time_setup(0, evt - TIMER_SYNC_TICKS); - sun5i_clkevt_time_start(0, false); + struct sun5i_timer_clkevt *ce = to_sun5i_timer_clkevt(clkevt); + + sun5i_clkevt_time_stop(ce, 0); + sun5i_clkevt_time_setup(ce, 0, evt - TIMER_SYNC_TICKS); + sun5i_clkevt_time_start(ce, 0, false); return 0; } -static struct clock_event_device sun5i_clockevent = { - .name = "sun5i_tick", - .rating = 340, - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_mode = sun5i_clkevt_mode, - .set_next_event = sun5i_clkevt_next_event, -}; - - static irqreturn_t sun5i_timer_interrupt(int irq, void *dev_id) { - struct clock_event_device *evt = (struct clock_event_device *)dev_id; + struct sun5i_timer_clkevt *ce = (struct sun5i_timer_clkevt *)dev_id; - writel(0x1, timer_base + TIMER_IRQ_ST_REG); - evt->event_handler(evt); + writel(0x1, ce->timer.base + TIMER_IRQ_ST_REG); + ce->clkevt.event_handler(&ce->clkevt); return IRQ_HANDLED; } -static struct irqaction sun5i_timer_irq = { - .name = "sun5i_timer0", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = sun5i_timer_interrupt, - .dev_id = &sun5i_clockevent, -}; +static cycle_t sun5i_clksrc_read(struct clocksource *clksrc) +{ + struct sun5i_timer_clksrc *cs = to_sun5i_timer_clksrc(clksrc); + + return ~readl(cs->timer.base + TIMER_CNTVAL_LO_REG(1)); +} -static u64 sun5i_timer_sched_read(void) +static int sun5i_rate_cb_clksrc(struct notifier_block *nb, + unsigned long event, void *data) { - return ~readl(timer_base + TIMER_CNTVAL_LO_REG(1)); + struct clk_notifier_data *ndata = data; + struct sun5i_timer *timer = to_sun5i_timer(nb); + struct sun5i_timer_clksrc *cs = container_of(timer, struct sun5i_timer_clksrc, timer); + + switch (event) { + case PRE_RATE_CHANGE: + clocksource_unregister(&cs->clksrc); + break; + + case POST_RATE_CHANGE: + clocksource_register_hz(&cs->clksrc, ndata->new_rate); + break; + + default: + break; + } + + return NOTIFY_DONE; +} + +static int __init sun5i_setup_clocksource(struct device_node *node, + void __iomem *base, + struct clk *clk, int irq) +{ + struct sun5i_timer_clksrc *cs; + unsigned long rate; + int ret; + + cs = kzalloc(sizeof(*cs), GFP_KERNEL); + if (!cs) + return -ENOMEM; + + ret = clk_prepare_enable(clk); + if (ret) { + pr_err("Couldn't enable parent clock\n"); + goto err_free; + } + + rate = clk_get_rate(clk); + + cs->timer.base = base; + cs->timer.clk = clk; + cs->timer.clk_rate_cb.notifier_call = sun5i_rate_cb_clksrc; + cs->timer.clk_rate_cb.next = NULL; + + ret = clk_notifier_register(clk, &cs->timer.clk_rate_cb); + if (ret) { + pr_err("Unable to register clock notifier.\n"); + goto err_disable_clk; + } + + writel(~0, base + TIMER_INTVAL_LO_REG(1)); + writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD, + base + TIMER_CTL_REG(1)); + + cs->clksrc.name = node->name; + cs->clksrc.rating = 340; + cs->clksrc.read = sun5i_clksrc_read; + cs->clksrc.mask = CLOCKSOURCE_MASK(32); + cs->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS; + + ret = clocksource_register_hz(&cs->clksrc, rate); + if (ret) { + pr_err("Couldn't register clock source.\n"); + goto err_remove_notifier; + } + + return 0; + +err_remove_notifier: + clk_notifier_unregister(clk, &cs->timer.clk_rate_cb); +err_disable_clk: + clk_disable_unprepare(clk); +err_free: + kfree(cs); + return ret; +} + +static int sun5i_rate_cb_clkevt(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct clk_notifier_data *ndata = data; + struct sun5i_timer *timer = to_sun5i_timer(nb); + struct sun5i_timer_clkevt *ce = container_of(timer, struct sun5i_timer_clkevt, timer); + + if (event == POST_RATE_CHANGE) { + clockevents_update_freq(&ce->clkevt, ndata->new_rate); + ce->timer.ticks_per_jiffy = DIV_ROUND_UP(ndata->new_rate, HZ); + } + + return NOTIFY_DONE; +} + +static int __init sun5i_setup_clockevent(struct device_node *node, void __iomem *base, + struct clk *clk, int irq) +{ + struct sun5i_timer_clkevt *ce; + unsigned long rate; + int ret; + u32 val; + + ce = kzalloc(sizeof(*ce), GFP_KERNEL); + if (!ce) + return -ENOMEM; + + ret = clk_prepare_enable(clk); + if (ret) { + pr_err("Couldn't enable parent clock\n"); + goto err_free; + } + + rate = clk_get_rate(clk); + + ce->timer.base = base; + ce->timer.ticks_per_jiffy = DIV_ROUND_UP(rate, HZ); + ce->timer.clk = clk; + ce->timer.clk_rate_cb.notifier_call = sun5i_rate_cb_clkevt; + ce->timer.clk_rate_cb.next = NULL; + + ret = clk_notifier_register(clk, &ce->timer.clk_rate_cb); + if (ret) { + pr_err("Unable to register clock notifier.\n"); + goto err_disable_clk; + } + + ce->clkevt.name = node->name; + ce->clkevt.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; + ce->clkevt.set_next_event = sun5i_clkevt_next_event; + ce->clkevt.set_mode = sun5i_clkevt_mode; + ce->clkevt.rating = 340; + ce->clkevt.irq = irq; + ce->clkevt.cpumask = cpu_possible_mask; + + /* Enable timer0 interrupt */ + val = readl(base + TIMER_IRQ_EN_REG); + writel(val | TIMER_IRQ_EN(0), base + TIMER_IRQ_EN_REG); + + clockevents_config_and_register(&ce->clkevt, rate, + TIMER_SYNC_TICKS, 0xffffffff); + + ret = request_irq(irq, sun5i_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL, + "sun5i_timer0", ce); + if (ret) { + pr_err("Unable to register interrupt\n"); + goto err_remove_notifier; + } + + return 0; + +err_remove_notifier: + clk_notifier_unregister(clk, &ce->timer.clk_rate_cb); +err_disable_clk: + clk_disable_unprepare(clk); +err_free: + kfree(ce); + return ret; } static void __init sun5i_timer_init(struct device_node *node) { struct reset_control *rstc; - unsigned long rate; + void __iomem *timer_base; struct clk *clk; - int ret, irq; - u32 val; + int irq; - timer_base = of_iomap(node, 0); + timer_base = of_io_request_and_map(node, 0, of_node_full_name(node)); if (!timer_base) panic("Can't map registers"); @@ -161,36 +334,13 @@ static void __init sun5i_timer_init(struct device_node *node) clk = of_clk_get(node, 0); if (IS_ERR(clk)) panic("Can't get timer clock"); - clk_prepare_enable(clk); - rate = clk_get_rate(clk); rstc = of_reset_control_get(node, NULL); if (!IS_ERR(rstc)) reset_control_deassert(rstc); - writel(~0, timer_base + TIMER_INTVAL_LO_REG(1)); - writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD, - timer_base + TIMER_CTL_REG(1)); - - sched_clock_register(sun5i_timer_sched_read, 32, rate); - clocksource_mmio_init(timer_base + TIMER_CNTVAL_LO_REG(1), node->name, - rate, 340, 32, clocksource_mmio_readl_down); - - ticks_per_jiffy = DIV_ROUND_UP(rate, HZ); - - ret = setup_irq(irq, &sun5i_timer_irq); - if (ret) - pr_warn("failed to setup irq %d\n", irq); - - /* Enable timer0 interrupt */ - val = readl(timer_base + TIMER_IRQ_EN_REG); - writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG); - - sun5i_clockevent.cpumask = cpu_possible_mask; - sun5i_clockevent.irq = irq; - - clockevents_config_and_register(&sun5i_clockevent, rate, - TIMER_SYNC_TICKS, 0xffffffff); + sun5i_setup_clocksource(node, timer_base, clk, irq); + sun5i_setup_clockevent(node, timer_base, clk, irq); } CLOCKSOURCE_OF_DECLARE(sun5i_a13, "allwinner,sun5i-a13-hstimer", sun5i_timer_init); |