summaryrefslogtreecommitdiff
path: root/drivers/bluetooth/btusb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/bluetooth/btusb.c')
-rw-r--r--drivers/bluetooth/btusb.c57
1 files changed, 34 insertions, 23 deletions
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index a9c35ebb30f8..70e385987d41 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -1200,7 +1200,7 @@ static int btusb_open(struct hci_dev *hdev)
if (data->setup_on_usb) {
err = data->setup_on_usb(hdev);
if (err < 0)
- return err;
+ goto setup_fail;
}
data->intf->needs_remote_wakeup = 1;
@@ -1239,6 +1239,7 @@ done:
failed:
clear_bit(BTUSB_INTR_RUNNING, &data->flags);
+setup_fail:
usb_autopm_put_interface(data->intf);
return err;
}
@@ -2182,8 +2183,11 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
* loaded.
*/
err = btintel_read_version(hdev, &ver);
- if (err)
+ if (err) {
+ bt_dev_err(hdev, "Intel Read version failed (%d)", err);
+ btintel_reset_to_bootloader(hdev);
return err;
+ }
/* The hardware platform number has a fixed value of 0x37 and
* for now only accept this single value.
@@ -2326,9 +2330,13 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
/* Start firmware downloading and get boot parameter */
err = btintel_download_firmware(hdev, fw, &boot_param);
- if (err < 0)
+ if (err < 0) {
+ /* When FW download fails, send Intel Reset to retry
+ * FW download.
+ */
+ btintel_reset_to_bootloader(hdev);
goto done;
-
+ }
set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
bt_dev_info(hdev, "Waiting for firmware download to complete");
@@ -2355,6 +2363,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
if (err) {
bt_dev_err(hdev, "Firmware loading timeout");
err = -ETIMEDOUT;
+ btintel_reset_to_bootloader(hdev);
goto done;
}
@@ -2381,8 +2390,11 @@ done:
set_bit(BTUSB_BOOTING, &data->flags);
err = btintel_send_intel_reset(hdev, boot_param);
- if (err)
+ if (err) {
+ bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err);
+ btintel_reset_to_bootloader(hdev);
return err;
+ }
/* The bootloader will not indicate when the device is ready. This
* is done by the operational firmware sending bootup notification.
@@ -2404,6 +2416,7 @@ done:
if (err) {
bt_dev_err(hdev, "Device boot timeout");
+ btintel_reset_to_bootloader(hdev);
return -ETIMEDOUT;
}
@@ -2432,6 +2445,13 @@ done:
*/
btintel_set_event_mask(hdev, false);
+ /* Read the Intel version information after loading the FW */
+ err = btintel_read_version(hdev, &ver);
+ if (err)
+ return err;
+
+ btintel_version_info(hdev, &ver);
+
return 0;
}
@@ -2489,8 +2509,6 @@ static int btusb_shutdown_intel_new(struct hci_dev *hdev)
return 0;
}
-#ifdef CONFIG_BT_HCIBTUSB_MTK
-
#define FIRMWARE_MT7663 "mediatek/mt7663pr2h.bin"
#define FIRMWARE_MT7668 "mediatek/mt7668pr2h.bin"
@@ -3051,7 +3069,6 @@ static int btusb_mtk_shutdown(struct hci_dev *hdev)
MODULE_FIRMWARE(FIRMWARE_MT7663);
MODULE_FIRMWARE(FIRMWARE_MT7668);
-#endif
#ifdef CONFIG_PM
/* Configure an out-of-band gpio as wake-up pin, if specified in device tree */
@@ -3411,7 +3428,6 @@ static int btusb_setup_qca(struct hci_dev *hdev)
return 0;
}
-#ifdef CONFIG_BT_HCIBTUSB_BCM
static inline int __set_diag_interface(struct hci_dev *hdev)
{
struct btusb_data *data = hci_get_drvdata(hdev);
@@ -3498,7 +3514,6 @@ static int btusb_bcm_set_diag(struct hci_dev *hdev, bool enable)
return submit_or_queue_tx_urb(hdev, urb);
}
-#endif
#ifdef CONFIG_PM
static irqreturn_t btusb_oob_wake_handler(int irq, void *priv)
@@ -3724,8 +3739,8 @@ static int btusb_probe(struct usb_interface *intf,
if (id->driver_info & BTUSB_BCM92035)
hdev->setup = btusb_setup_bcm92035;
-#ifdef CONFIG_BT_HCIBTUSB_BCM
- if (id->driver_info & BTUSB_BCM_PATCHRAM) {
+ if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) &&
+ (id->driver_info & BTUSB_BCM_PATCHRAM)) {
hdev->manufacturer = 15;
hdev->setup = btbcm_setup_patchram;
hdev->set_diag = btusb_bcm_set_diag;
@@ -3735,7 +3750,8 @@ static int btusb_probe(struct usb_interface *intf,
data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2);
}
- if (id->driver_info & BTUSB_BCM_APPLE) {
+ if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) &&
+ (id->driver_info & BTUSB_BCM_APPLE)) {
hdev->manufacturer = 15;
hdev->setup = btbcm_setup_apple;
hdev->set_diag = btusb_bcm_set_diag;
@@ -3743,7 +3759,6 @@ static int btusb_probe(struct usb_interface *intf,
/* Broadcom LM_DIAG Interface numbers are hardcoded */
data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2);
}
-#endif
if (id->driver_info & BTUSB_INTEL) {
hdev->manufacturer = 2;
@@ -3774,14 +3789,13 @@ static int btusb_probe(struct usb_interface *intf,
if (id->driver_info & BTUSB_MARVELL)
hdev->set_bdaddr = btusb_set_bdaddr_marvell;
-#ifdef CONFIG_BT_HCIBTUSB_MTK
- if (id->driver_info & BTUSB_MEDIATEK) {
+ if (IS_ENABLED(CONFIG_BT_HCIBTUSB_MTK) &&
+ (id->driver_info & BTUSB_MEDIATEK)) {
hdev->setup = btusb_mtk_setup;
hdev->shutdown = btusb_mtk_shutdown;
hdev->manufacturer = 70;
set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
}
-#endif
if (id->driver_info & BTUSB_SWAVE) {
set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks);
@@ -3807,8 +3821,8 @@ static int btusb_probe(struct usb_interface *intf,
btusb_check_needs_reset_resume(intf);
}
-#ifdef CONFIG_BT_HCIBTUSB_RTL
- if (id->driver_info & BTUSB_REALTEK) {
+ if (IS_ENABLED(CONFIG_BT_HCIBTUSB_RTL) &&
+ (id->driver_info & BTUSB_REALTEK)) {
hdev->setup = btrtl_setup_realtek;
hdev->shutdown = btrtl_shutdown_realtek;
hdev->cmd_timeout = btusb_rtl_cmd_timeout;
@@ -3819,7 +3833,6 @@ static int btusb_probe(struct usb_interface *intf,
*/
set_bit(BTUSB_WAKEUP_DISABLE, &data->flags);
}
-#endif
if (id->driver_info & BTUSB_AMP) {
/* AMP controllers do not support SCO packets */
@@ -3887,15 +3900,13 @@ static int btusb_probe(struct usb_interface *intf,
goto out_free_dev;
}
-#ifdef CONFIG_BT_HCIBTUSB_BCM
- if (data->diag) {
+ if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) && data->diag) {
if (!usb_driver_claim_interface(&btusb_driver,
data->diag, data))
__set_diag_interface(hdev);
else
data->diag = NULL;
}
-#endif
if (enable_autosuspend)
usb_enable_autosuspend(data->udev);
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-08 19:38:05 +0300