diff options
Diffstat (limited to 'drivers/block')
| -rw-r--r-- | drivers/block/cciss.c | 267 | ||||
| -rw-r--r-- | drivers/block/cciss.h | 109 | ||||
| -rw-r--r-- | drivers/block/cciss_cmd.h | 34 | ||||
| -rw-r--r-- | drivers/block/cciss_scsi.c | 6 |
4 files changed, 353 insertions, 63 deletions
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index cd830cb64a5d..08a2e619dc36 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -206,6 +206,11 @@ static void cciss_device_release(struct device *dev); static void cciss_free_gendisk(ctlr_info_t *h, int drv_index); static void cciss_free_drive_info(ctlr_info_t *h, int drv_index); +/* performant mode helper functions */ +static void calc_bucket_map(int *bucket, int num_buckets, int nsgs, + int *bucket_map); +static void cciss_put_controller_into_performant_mode(ctlr_info_t *h); + #ifdef CONFIG_PROC_FS static void cciss_procinit(int i); #else @@ -231,6 +236,16 @@ static const struct block_device_operations cciss_fops = { .revalidate_disk = cciss_revalidate, }; +/* set_performant_mode: Modify the tag for cciss performant + * set bit 0 for pull model, bits 3-1 for block fetch + * register number + */ +static void set_performant_mode(ctlr_info_t *h, CommandList_struct *c) +{ + if (likely(h->transMethod == CFGTBL_Trans_Performant)) + c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1); +} + /* * Enqueuing and dequeuing functions for cmdlists. */ @@ -261,6 +276,7 @@ static void enqueue_cmd_and_start_io(ctlr_info_t *h, CommandList_struct *c) { unsigned long flags; + set_performant_mode(h, c); spin_lock_irqsave(&h->lock, flags); addQ(&h->reqQ, c); h->Qdepth++; @@ -350,6 +366,28 @@ static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG", #ifdef CONFIG_PROC_FS +static inline u32 next_command(ctlr_info_t *h) +{ + u32 a; + + if (unlikely(h->transMethod != CFGTBL_Trans_Performant)) + return h->access.command_completed(h); + + if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) { + a = *(h->reply_pool_head); /* Next cmd in ring buffer */ + (h->reply_pool_head)++; + h->commands_outstanding--; + } else { + a = FIFO_EMPTY; + } + /* Check for wraparound */ + if (h->reply_pool_head == (h->reply_pool + h->max_commands)) { + h->reply_pool_head = h->reply_pool; + h->reply_pool_wraparound ^= 1; + } + return a; +} + /* * Report information about this controller. */ @@ -377,7 +415,7 @@ static void cciss_seq_show_header(struct seq_file *seq) h->product_name, (unsigned long)h->board_id, h->firm_ver[0], h->firm_ver[1], h->firm_ver[2], - h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT], + h->firm_ver[3], (unsigned int)h->intr[PERF_MODE_INT], h->num_luns, h->Qdepth, h->commands_outstanding, h->maxQsinceinit, h->max_outstanding, h->maxSG); @@ -3126,13 +3164,13 @@ after_error_processing: static inline u32 cciss_tag_contains_index(u32 tag) { -#define DIRECT_LOOKUP_BIT 0x04 +#define DIRECT_LOOKUP_BIT 0x10 return tag & DIRECT_LOOKUP_BIT; } static inline u32 cciss_tag_to_index(u32 tag) { -#define DIRECT_LOOKUP_SHIFT 3 +#define DIRECT_LOOKUP_SHIFT 5 return tag >> DIRECT_LOOKUP_SHIFT; } @@ -3262,9 +3300,12 @@ static void do_cciss_request(struct request_queue *q) blk_rq_sectors(creq), seg, chained); #endif /* CCISS_DEBUG */ - c->Header.SGList = c->Header.SGTotal = seg + chained; - if (seg > h->max_cmd_sgentries) + c->Header.SGTotal = seg + chained; + if (seg <= h->max_cmd_sgentries) + c->Header.SGList = c->Header.SGTotal; + else c->Header.SGList = h->max_cmd_sgentries; + set_performant_mode(h, c); if (likely(blk_fs_request(creq))) { if(h->cciss_read == CCISS_READ_10) { @@ -3370,10 +3411,10 @@ static inline u32 process_indexed_cmd(ctlr_info_t *h, u32 raw_tag) tag_index = cciss_tag_to_index(raw_tag); if (bad_tag(h, tag_index, raw_tag)) - return get_next_completion(h); + return next_command(h); c = h->cmd_pool + tag_index; finish_cmd(h, c, raw_tag); - return get_next_completion(h); + return next_command(h); } /* process completion of a non-indexed command */ @@ -3390,11 +3431,11 @@ static inline u32 process_nonindexed_cmd(ctlr_info_t *h, u32 raw_tag) tag_masked = cciss_tag_discard_error_bits(tag); if (busaddr_masked == tag_masked) { finish_cmd(h, c, raw_tag); - return get_next_completion(h); + return next_command(h); } } bad_tag(h, h->nr_cmds + 1, raw_tag); - return get_next_completion(h); + return next_command(h); } static irqreturn_t do_cciss_intx(int irq, void *dev_id) @@ -3700,6 +3741,155 @@ static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr) return -1; } +/* Fill in bucket_map[], given nsgs (the max number of + * scatter gather elements supported) and bucket[], + * which is an array of 8 integers. The bucket[] array + * contains 8 different DMA transfer sizes (in 16 + * byte increments) which the controller uses to fetch + * commands. This function fills in bucket_map[], which + * maps a given number of scatter gather elements to one of + * the 8 DMA transfer sizes. The point of it is to allow the + * controller to only do as much DMA as needed to fetch the + * command, with the DMA transfer size encoded in the lower + * bits of the command address. + */ +static void calc_bucket_map(int bucket[], int num_buckets, + int nsgs, int *bucket_map) +{ + int i, j, b, size; + + /* even a command with 0 SGs requires 4 blocks */ +#define MINIMUM_TRANSFER_BLOCKS 4 +#define NUM_BUCKETS 8 + /* Note, bucket_map must have nsgs+1 entries. */ + for (i = 0; i <= nsgs; i++) { + /* Compute size of a command with i SG entries */ + size = i + MINIMUM_TRANSFER_BLOCKS; + b = num_buckets; /* Assume the biggest bucket */ + /* Find the bucket that is just big enough */ + for (j = 0; j < 8; j++) { + if (bucket[j] >= size) { + b = j; + break; + } + } + /* for a command with i SG entries, use bucket b. */ + bucket_map[i] = b; + } +} + +static void +cciss_put_controller_into_performant_mode(ctlr_info_t *h) +{ + int l = 0; + __u32 trans_support; + __u32 trans_offset; + /* + * 5 = 1 s/g entry or 4k + * 6 = 2 s/g entry or 8k + * 8 = 4 s/g entry or 16k + * 10 = 6 s/g entry or 24k + */ + int bft[8] = { 5, 6, 8, 10, 12, 20, 28, MAXSGENTRIES + 4}; + unsigned long register_value; + + BUILD_BUG_ON(28 > MAXSGENTRIES + 4); + + /* Attempt to put controller into performant mode if supported */ + /* Does board support performant mode? */ + trans_support = readl(&(h->cfgtable->TransportSupport)); + if (!(trans_support & PERFORMANT_MODE)) + return; + + printk(KERN_WARNING "cciss%d: Placing controller into " + "performant mode\n", h->ctlr); + /* Performant mode demands commands on a 32 byte boundary + * pci_alloc_consistent aligns on page boundarys already. + * Just need to check if divisible by 32 + */ + if ((sizeof(CommandList_struct) % 32) != 0) { + printk(KERN_WARNING "%s %d %s\n", + "cciss info: command size[", + (int)sizeof(CommandList_struct), + "] not divisible by 32, no performant mode..\n"); + return; + } + + /* Performant mode ring buffer and supporting data structures */ + h->reply_pool = (__u64 *)pci_alloc_consistent( + h->pdev, h->max_commands * sizeof(__u64), + &(h->reply_pool_dhandle)); + + /* Need a block fetch table for performant mode */ + h->blockFetchTable = kmalloc(((h->maxsgentries+1) * + sizeof(__u32)), GFP_KERNEL); + + if ((h->reply_pool == NULL) || (h->blockFetchTable == NULL)) + goto clean_up; + + h->reply_pool_wraparound = 1; /* spec: init to 1 */ + + /* Controller spec: zero out this buffer. */ + memset(h->reply_pool, 0, h->max_commands * sizeof(__u64)); + h->reply_pool_head = h->reply_pool; + + trans_offset = readl(&(h->cfgtable->TransMethodOffset)); + calc_bucket_map(bft, ARRAY_SIZE(bft), h->maxsgentries, + h->blockFetchTable); + writel(bft[0], &h->transtable->BlockFetch0); + writel(bft[1], &h->transtable->BlockFetch1); + writel(bft[2], &h->transtable->BlockFetch2); + writel(bft[3], &h->transtable->BlockFetch3); + writel(bft[4], &h->transtable->BlockFetch4); + writel(bft[5], &h->transtable->BlockFetch5); + writel(bft[6], &h->transtable->BlockFetch6); + writel(bft[7], &h->transtable->BlockFetch7); + + /* size of controller ring buffer */ + writel(h->max_commands, &h->transtable->RepQSize); + writel(1, &h->transtable->RepQCount); + writel(0, &h->transtable->RepQCtrAddrLow32); + writel(0, &h->transtable->RepQCtrAddrHigh32); + writel(h->reply_pool_dhandle, &h->transtable->RepQAddr0Low32); + writel(0, &h->transtable->RepQAddr0High32); + writel(CFGTBL_Trans_Performant, + &(h->cfgtable->HostWrite.TransportRequest)); + + h->transMethod = CFGTBL_Trans_Performant; + writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); + /* under certain very rare conditions, this can take awhile. + * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right + * as we enter this code.) */ + for (l = 0; l < MAX_CONFIG_WAIT; l++) { + register_value = readl(h->vaddr + SA5_DOORBELL); + if (!(register_value & CFGTBL_ChangeReq)) + break; + /* delay and try again */ + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(10); + } + register_value = readl(&(h->cfgtable->TransportActive)); + if (!(register_value & CFGTBL_Trans_Performant)) { + printk(KERN_WARNING "cciss: unable to get board into" + " performant mode\n"); + return; + } + + /* Change the access methods to the performant access methods */ + h->access = SA5_performant_access; + + return; +clean_up: + kfree(h->blockFetchTable); + if (h->reply_pool) + pci_free_consistent(h->pdev, + h->max_commands * sizeof(__u64), + h->reply_pool, + h->reply_pool_dhandle); + return; + +} /* cciss_put_controller_into_performant_mode */ + /* If MSI/MSI-X is supported by the kernel we will try to enable it on * controllers that are capable. If not, we use IO-APIC mode. */ @@ -3749,7 +3939,7 @@ static void __devinit cciss_interrupt_mode(ctlr_info_t *c, default_int_mode: #endif /* CONFIG_PCI_MSI */ /* if we get here we're going to use the default interrupt mode */ - c->intr[SIMPLE_MODE_INT] = pdev->irq; + c->intr[PERF_MODE_INT] = pdev->irq; return; } @@ -3761,6 +3951,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) __u32 cfg_base_addr; __u64 cfg_base_addr_index; int i, prod_index, err; + __u32 trans_offset; subsystem_vendor_id = pdev->subsystem_vendor; subsystem_device_id = pdev->subsystem_device; @@ -3874,11 +4065,16 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) c->cfgtable = remap_pci_mem(pci_resource_start(pdev, cfg_base_addr_index) + cfg_offset, sizeof(CfgTable_struct)); + /* Find performant mode table. */ + trans_offset = readl(&(c->cfgtable->TransMethodOffset)); + c->transtable = remap_pci_mem(pci_resource_start(pdev, + cfg_base_addr_index) + cfg_offset+trans_offset, + sizeof(*c->transtable)); c->board_id = board_id; -#ifdef CCISS_DEBUG - print_cfg_table(c->cfgtable); -#endif /* CCISS_DEBUG */ + #ifdef CCISS_DEBUG + print_cfg_table(c->cfgtable); + #endif /* CCISS_DEBUG */ /* Some controllers support Zero Memory Raid (ZMR). * When configured in ZMR mode the number of supported @@ -3888,7 +4084,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) * are supported on the controller then subtract 4 to * leave a little room for ioctl calls. */ - c->max_commands = readl(&(c->cfgtable->CmdsOutMax)); + c->max_commands = readl(&(c->cfgtable->MaxPerformantModeCommands)); c->maxsgentries = readl(&(c->cfgtable->MaxSGElements)); /* @@ -3933,7 +4129,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) * kernels revealed a bug in the refetch if dom0 resides on a P600. */ if(board_id == 0x3225103C) { - __u32 dma_prefetch; + __u32 dma_prefetch; __u32 dma_refetch; dma_prefetch = readl(c->vaddr + I2O_DMA1_CFG); dma_prefetch |= 0x8000; @@ -3944,38 +4140,8 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) } #ifdef CCISS_DEBUG - printk("Trying to put board into Simple mode\n"); + printk(KERN_WARNING "Trying to put board into Performant mode\n"); #endif /* CCISS_DEBUG */ - c->max_commands = readl(&(c->cfgtable->CmdsOutMax)); - /* Update the field, and then ring the doorbell */ - writel(CFGTBL_Trans_Simple, &(c->cfgtable->HostWrite.TransportRequest)); - writel(CFGTBL_ChangeReq, c->vaddr + SA5_DOORBELL); - - /* under certain very rare conditions, this can take awhile. - * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right - * as we enter this code.) */ - for (i = 0; i < MAX_CONFIG_WAIT; i++) { - if (!(readl(c->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq)) - break; - /* delay and try again */ - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(msecs_to_jiffies(1)); - } - -#ifdef CCISS_DEBUG - printk(KERN_DEBUG "I counter got to %d %x\n", i, - readl(c->vaddr + SA5_DOORBELL)); -#endif /* CCISS_DEBUG */ -#ifdef CCISS_DEBUG - print_cfg_table(c->cfgtable); -#endif /* CCISS_DEBUG */ - - if (!(readl(&(c->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) { - printk(KERN_WARNING "cciss: unable to get board into" - " simple mode\n"); - err = -ENODEV; - goto err_out_free_res; - } return 0; err_out_free_res: @@ -3984,6 +4150,7 @@ err_out_free_res: * Smart Array controllers that pci_enable_device does not undo */ pci_release_regions(pdev); + cciss_put_controller_into_performant_mode(c); return err; } @@ -4260,7 +4427,6 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, i = alloc_cciss_hba(); if (i < 0) return -1; - hba[i]->busy_initializing = 1; INIT_HLIST_HEAD(&hba[i]->cmpQ); INIT_HLIST_HEAD(&hba[i]->reqQ); @@ -4327,7 +4493,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, printk(KERN_INFO "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n", hba[i]->devname, pdev->device, pci_name(pdev), - hba[i]->intr[SIMPLE_MODE_INT], dac ? "" : " not"); + hba[i]->intr[PERF_MODE_INT], dac ? "" : " not"); hba[i]->cmd_pool_bits = kmalloc(DIV_ROUND_UP(hba[i]->nr_cmds, BITS_PER_LONG) @@ -4433,7 +4599,7 @@ clean4: hba[i]->nr_cmds * sizeof(ErrorInfo_struct), hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle); - free_irq(hba[i]->intr[SIMPLE_MODE_INT], hba[i]); + free_irq(hba[i]->intr[PERF_MODE_INT], hba[i]); clean2: unregister_blkdev(hba[i]->major, hba[i]->devname); clean1: @@ -4475,7 +4641,7 @@ static void cciss_shutdown(struct pci_dev *pdev) printk(KERN_WARNING "cciss%d: Error flushing cache\n", h->ctlr); h->access.set_intr_mask(h, CCISS_INTR_OFF); - free_irq(h->intr[2], h); + free_irq(h->intr[PERF_MODE_INT], h); } static void __devexit cciss_remove_one(struct pci_dev *pdev) @@ -4575,7 +4741,6 @@ static int __init cciss_init(void) * array of them, the size must be a multiple of 8 bytes. */ BUILD_BUG_ON(sizeof(CommandList_struct) % COMMANDLIST_ALIGNMENT); - printk(KERN_INFO DRIVER_NAME "\n"); err = bus_register(&cciss_bus_type); diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h index c527932d223a..8a9f5b58daa8 100644 --- a/drivers/block/cciss.h +++ b/drivers/block/cciss.h @@ -85,8 +85,8 @@ struct ctlr_info int max_cmd_sgentries; SGDescriptor_struct **cmd_sg_list; -# define DOORBELL_INT 0 -# define PERF_MODE_INT 1 +# define PERF_MODE_INT 0 +# define DOORBELL_INT 1 # define SIMPLE_MODE_INT 2 # define MEMQ_MODE_INT 3 unsigned int intr[4]; @@ -137,10 +137,27 @@ struct ctlr_info struct list_head scan_list; struct completion scan_wait; struct device dev; + /* + * Performant mode tables. + */ + u32 trans_support; + u32 trans_offset; + struct TransTable_struct *transtable; + unsigned long transMethod; + + /* + * Performant mode completion buffer + */ + u64 *reply_pool; + dma_addr_t reply_pool_dhandle; + u64 *reply_pool_head; + size_t reply_pool_size; + unsigned char reply_pool_wraparound; + u32 *blockFetchTable; }; -/* Defining the diffent access_menthods */ -/* +/* Defining the diffent access_methods + * * Memory mapped FIFO interface (SMART 53xx cards) */ #define SA5_DOORBELL 0x20 @@ -159,6 +176,15 @@ struct ctlr_info #define SA5B_INTR_PENDING 0x04 #define FIFO_EMPTY 0xffffffff #define CCISS_FIRMWARE_READY 0xffff0000 /* value in scratchpad register */ +/* Perf. mode flags */ +#define SA5_PERF_INTR_PENDING 0x04 +#define SA5_PERF_INTR_OFF 0x05 +#define SA5_OUTDB_STATUS_PERF_BIT 0x01 +#define SA5_OUTDB_CLEAR_PERF_BIT 0x01 +#define SA5_OUTDB_CLEAR 0xA0 +#define SA5_OUTDB_CLEAR_PERF_BIT 0x01 +#define SA5_OUTDB_STATUS 0x9C + #define CISS_ERROR_BIT 0x02 @@ -170,8 +196,9 @@ struct ctlr_info static void SA5_submit_command( ctlr_info_t *h, CommandList_struct *c) { #ifdef CCISS_DEBUG - printk("Sending %x - down to controller\n", c->busaddr ); -#endif /* CCISS_DEBUG */ + printk(KERN_WARNING "cciss%d: Sending %08x - down to controller\n", + h->ctlr, c->busaddr); +#endif /* CCISS_DEBUG */ writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET); h->commands_outstanding++; if ( h->commands_outstanding > h->max_outstanding) @@ -214,6 +241,20 @@ static void SA5B_intr_mask(ctlr_info_t *h, unsigned long val) h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); } } + +/* Performant mode intr_mask */ +static void SA5_performant_intr_mask(ctlr_info_t *h, unsigned long val) +{ + if (val) { /* turn on interrupts */ + h->interrupts_enabled = 1; + writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); + } else { + h->interrupts_enabled = 0; + writel(SA5_PERF_INTR_OFF, + h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); + } +} + /* * Returns true if fifo is full. * @@ -250,6 +291,40 @@ static unsigned long SA5_completed(ctlr_info_t *h) return ( register_value); } + +/* Performant mode command completed */ +static unsigned long SA5_performant_completed(ctlr_info_t *h) +{ + unsigned long register_value = FIFO_EMPTY; + + /* flush the controller write of the reply queue by reading + * outbound doorbell status register. + */ + register_value = readl(h->vaddr + SA5_OUTDB_STATUS); + /* msi auto clears the interrupt pending bit. */ + if (!(h->msi_vector || h->msix_vector)) { + writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR); + /* Do a read in order to flush the write to the controller + * (as per spec.) + */ + register_value = readl(h->vaddr + SA5_OUTDB_STATUS); + } + + if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) { + register_value = *(h->reply_pool_head); + (h->reply_pool_head)++; + h->commands_outstanding--; + } else { + register_value = FIFO_EMPTY; + } + /* Check for wraparound */ + if (h->reply_pool_head == (h->reply_pool + h->max_commands)) { + h->reply_pool_head = h->reply_pool; + h->reply_pool_wraparound ^= 1; + } + + return register_value; +} /* * Returns true if an interrupt is pending.. */ @@ -280,6 +355,20 @@ static bool SA5B_intr_pending(ctlr_info_t *h) return 0 ; } +static bool SA5_performant_intr_pending(ctlr_info_t *h) +{ + unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS); + + if (!register_value) + return false; + + if (h->msi_vector || h->msix_vector) + return true; + + /* Read outbound doorbell to flush */ + register_value = readl(h->vaddr + SA5_OUTDB_STATUS); + return register_value & SA5_OUTDB_STATUS_PERF_BIT; +} static struct access_method SA5_access = { SA5_submit_command, @@ -297,6 +386,14 @@ static struct access_method SA5B_access = { SA5_completed, }; +static struct access_method SA5_performant_access = { + SA5_submit_command, + SA5_performant_intr_mask, + SA5_fifo_full, + SA5_performant_intr_pending, + SA5_performant_completed, +}; + struct board_type { __u32 board_id; char *product_name; diff --git a/drivers/block/cciss_cmd.h b/drivers/block/cciss_cmd.h index e624ff959cb6..eda6a8e6b600 100644 --- a/drivers/block/cciss_cmd.h +++ b/drivers/block/cciss_cmd.h @@ -54,6 +54,7 @@ #define CFGTBL_AccCmds 0x00000001l #define CFGTBL_Trans_Simple 0x00000002l +#define CFGTBL_Trans_Performant 0x00000004l #define CFGTBL_BusType_Ultra2 0x00000001l #define CFGTBL_BusType_Ultra3 0x00000002l @@ -173,12 +174,15 @@ typedef struct _SGDescriptor_struct { * PAD_64 can be adjusted independently as needed for 32-bit * and 64-bits systems. */ -#define COMMANDLIST_ALIGNMENT (8) +#define COMMANDLIST_ALIGNMENT (32) #define IS_64_BIT ((sizeof(long) - 4)/4) #define IS_32_BIT (!IS_64_BIT) -#define PAD_32 (0) +#define PAD_32 (32) #define PAD_64 (4) #define PADSIZE (IS_32_BIT * PAD_32 + IS_64_BIT * PAD_64) +#define DIRECT_LOOKUP_BIT 0x10 +#define DIRECT_LOOKUP_SHIFT 5 + typedef struct _CommandList_struct { CommandListHeader_struct Header; RequestBlock_struct Request; @@ -195,7 +199,7 @@ typedef struct _CommandList_struct { struct completion *waiting; int retry_count; void * scsi_cmd; - char pad[PADSIZE]; + char pad[PADSIZE]; } CommandList_struct; /* Configuration Table Structure */ @@ -209,12 +213,15 @@ typedef struct _HostWrite_struct { typedef struct _CfgTable_struct { BYTE Signature[4]; DWORD SpecValence; +#define SIMPLE_MODE 0x02 +#define PERFORMANT_MODE 0x04 +#define MEMQ_MODE 0x08 DWORD TransportSupport; DWORD TransportActive; HostWrite_struct HostWrite; DWORD CmdsOutMax; DWORD BusTypes; - DWORD Reserved; + DWORD TransMethodOffset; BYTE ServerName[16]; DWORD HeartBeat; DWORD SCSI_Prefetch; @@ -222,6 +229,25 @@ typedef struct _CfgTable_struct { DWORD MaxLogicalUnits; DWORD MaxPhysicalDrives; DWORD MaxPhysicalDrivesPerLogicalUnit; + DWORD MaxPerformantModeCommands; } CfgTable_struct; + +struct TransTable_struct { + u32 BlockFetch0; + u32 BlockFetch1; + u32 BlockFetch2; + u32 BlockFetch3; + u32 BlockFetch4; + u32 BlockFetch5; + u32 BlockFetch6; + u32 BlockFetch7; + u32 RepQSize; + u32 RepQCount; + u32 RepQCtrAddrLow32; + u32 RepQCtrAddrHigh32; + u32 RepQAddr0Low32; + u32 RepQAddr0High32; +}; + #pragma pack() #endif /* CCISS_CMD_H */ diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index 72dae92f3cab..48be47853737 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -93,8 +93,8 @@ static struct scsi_host_template cciss_driver_template = { #pragma pack(1) -#define SCSI_PAD_32 0 -#define SCSI_PAD_64 0 +#define SCSI_PAD_32 8 +#define SCSI_PAD_64 8 struct cciss_scsi_cmd_stack_elem_t { CommandList_struct cmd; @@ -213,6 +213,8 @@ scsi_cmd_stack_setup(int ctlr, struct cciss_scsi_adapter_data_t *sa) /* Check alignment, see cciss_cmd.h near CommandList_struct def. */ BUILD_BUG_ON((sizeof(*stk->pool) % COMMANDLIST_ALIGNMENT) != 0); + /* printk(KERN_WARNING "cciss_scsi.c: 0x%08x 0x%08x 0x%08x\n", + 0xdeadbeef, sizeof(*stk->pool), 0xbeefdead); */ /* pci_alloc_consistent guarantees 32-bit DMA address will be used */ stk->pool = (struct cciss_scsi_cmd_stack_elem_t *) pci_alloc_consistent(hba[ctlr]->pdev, size, &stk->cmd_pool_handle); |