summaryrefslogtreecommitdiff
path: root/drivers/block
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/block')
-rw-r--r--drivers/block/Kconfig29
-rw-r--r--drivers/block/aoe/aoe.h1
-rw-r--r--drivers/block/aoe/aoeblk.c2
-rw-r--r--drivers/block/aoe/aoecmd.c22
-rw-r--r--drivers/block/aoe/aoenet.c11
-rw-r--r--drivers/block/cciss.c14
-rw-r--r--drivers/block/floppy.c2
-rw-r--r--drivers/block/loop.c6
-rw-r--r--drivers/block/pktcdvd.c6
-rw-r--r--drivers/block/ub.c20
-rw-r--r--drivers/block/xen-blkfront.c8
-rw-r--r--drivers/block/xsysace.c23
12 files changed, 81 insertions, 63 deletions
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 61ad8d639ba3..0344a8a8321d 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -21,7 +21,8 @@ config BLK_DEV_FD
---help---
If you want to use the floppy disk drive(s) of your PC under Linux,
say Y. Information about this driver, especially important for IBM
- Thinkpad users, is contained in <file:Documentation/floppy.txt>.
+ Thinkpad users, is contained in
+ <file:Documentation/blockdev/floppy.txt>.
That file also contains the location of the Floppy driver FAQ as
well as location of the fdutils package used to configure additional
parameters of the driver at run time.
@@ -76,7 +77,7 @@ config PARIDE
your computer's parallel port. Most of them are actually IDE devices
using a parallel port IDE adapter. This option enables the PARIDE
subsystem which contains drivers for many of these external drives.
- Read <file:Documentation/paride.txt> for more information.
+ Read <file:Documentation/blockdev/paride.txt> for more information.
If you have said Y to the "Parallel-port support" configuration
option, you may share a single port between your printer and other
@@ -114,9 +115,9 @@ config BLK_CPQ_DA
help
This is the driver for Compaq Smart Array controllers. Everyone
using these boards should say Y here. See the file
- <file:Documentation/cpqarray.txt> for the current list of boards
- supported by this driver, and for further information on the use of
- this driver.
+ <file:Documentation/blockdev/cpqarray.txt> for the current list of
+ boards supported by this driver, and for further information on the
+ use of this driver.
config BLK_CPQ_CISS_DA
tristate "Compaq Smart Array 5xxx support"
@@ -124,7 +125,7 @@ config BLK_CPQ_CISS_DA
help
This is the driver for Compaq Smart Array 5xxx controllers.
Everyone using these boards should say Y here.
- See <file:Documentation/cciss.txt> for the current list of
+ See <file:Documentation/blockdev/cciss.txt> for the current list of
boards supported by this driver, and for further information
on the use of this driver.
@@ -135,7 +136,7 @@ config CISS_SCSI_TAPE
help
When enabled (Y), this option allows SCSI tape drives and SCSI medium
changers (tape robots) to be accessed via a Compaq 5xxx array
- controller. (See <file:Documentation/cciss.txt> for more details.)
+ controller. (See <file:Documentation/blockdev/cciss.txt> for more details.)
"SCSI support" and "SCSI tape support" must also be enabled for this
option to work.
@@ -149,8 +150,8 @@ config BLK_DEV_DAC960
help
This driver adds support for the Mylex DAC960, AcceleRAID, and
eXtremeRAID PCI RAID controllers. See the file
- <file:Documentation/README.DAC960> for further information about
- this driver.
+ <file:Documentation/blockdev/README.DAC960> for further information
+ about this driver.
To compile this driver as a module, choose M here: the
module will be called DAC960.
@@ -278,9 +279,9 @@ config BLK_DEV_NBD
userland (making server and client physically the same computer,
communicating using the loopback network device).
- Read <file:Documentation/nbd.txt> for more information, especially
- about where to find the server code, which runs in user space and
- does not need special kernel support.
+ Read <file:Documentation/blockdev/nbd.txt> for more information,
+ especially about where to find the server code, which runs in user
+ space and does not need special kernel support.
Note that this has nothing to do with the network file systems NFS
or Coda; you can say N here even if you intend to use NFS or Coda.
@@ -321,8 +322,8 @@ config BLK_DEV_RAM
store a copy of a minimal root file system off of a floppy into RAM
during the initial install of Linux.
- Note that the kernel command line option "ramdisk=XX" is now
- obsolete. For details, read <file:Documentation/ramdisk.txt>.
+ Note that the kernel command line option "ramdisk=XX" is now obsolete.
+ For details, read <file:Documentation/blockdev/ramdisk.txt>.
To compile this driver as a module, choose M here: the
module will be called rd.
diff --git a/drivers/block/aoe/aoe.h b/drivers/block/aoe/aoe.h
index 93f3690396a5..c237527b1aa5 100644
--- a/drivers/block/aoe/aoe.h
+++ b/drivers/block/aoe/aoe.h
@@ -200,4 +200,3 @@ void aoenet_xmit(struct sk_buff_head *);
int is_aoe_netif(struct net_device *ifp);
int set_aoe_iflist(const char __user *str, size_t size);
-unsigned long long mac_addr(char addr[6]);
diff --git a/drivers/block/aoe/aoeblk.c b/drivers/block/aoe/aoeblk.c
index 1747dd272cd4..2307a271bdc9 100644
--- a/drivers/block/aoe/aoeblk.c
+++ b/drivers/block/aoe/aoeblk.c
@@ -37,7 +37,7 @@ static ssize_t aoedisk_show_mac(struct device *dev,
if (t == NULL)
return snprintf(page, PAGE_SIZE, "none\n");
- return snprintf(page, PAGE_SIZE, "%012llx\n", mac_addr(t->addr));
+ return snprintf(page, PAGE_SIZE, "%pm\n", t->addr);
}
static ssize_t aoedisk_show_netif(struct device *dev,
struct device_attribute *attr, char *page)
diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c
index 71ff78c9e4d6..45c5a33daf49 100644
--- a/drivers/block/aoe/aoecmd.c
+++ b/drivers/block/aoe/aoecmd.c
@@ -349,11 +349,9 @@ resend(struct aoedev *d, struct aoetgt *t, struct frame *f)
ah = (struct aoe_atahdr *) (h+1);
snprintf(buf, sizeof buf,
- "%15s e%ld.%d oldtag=%08x@%08lx newtag=%08x "
- "s=%012llx d=%012llx nout=%d\n",
+ "%15s e%ld.%d oldtag=%08x@%08lx newtag=%08x s=%pm d=%pm nout=%d\n",
"retransmit", d->aoemajor, d->aoeminor, f->tag, jiffies, n,
- mac_addr(h->src),
- mac_addr(h->dst), t->nout);
+ h->src, h->dst, t->nout);
aoechr_error(buf);
f->tag = n;
@@ -544,10 +542,10 @@ rexmit_timer(ulong vp)
printk(KERN_INFO
"aoe: e%ld.%d: "
"too many lost jumbo on "
- "%s:%012llx - "
+ "%s:%pm - "
"falling back to %d frames.\n",
d->aoemajor, d->aoeminor,
- ifp->nd->name, mac_addr(t->addr),
+ ifp->nd->name, t->addr,
DEFAULTBCNT);
ifp->maxbcnt = 0;
}
@@ -672,8 +670,8 @@ ataid_complete(struct aoedev *d, struct aoetgt *t, unsigned char *id)
if (d->ssize != ssize)
printk(KERN_INFO
- "aoe: %012llx e%ld.%d v%04x has %llu sectors\n",
- mac_addr(t->addr),
+ "aoe: %pm e%ld.%d v%04x has %llu sectors\n",
+ t->addr,
d->aoemajor, d->aoeminor,
d->fw_ver, (long long)ssize);
d->ssize = ssize;
@@ -775,8 +773,8 @@ aoecmd_ata_rsp(struct sk_buff *skb)
n = get_unaligned_be32(&hin->tag);
t = gettgt(d, hin->src);
if (t == NULL) {
- printk(KERN_INFO "aoe: can't find target e%ld.%d:%012llx\n",
- d->aoemajor, d->aoeminor, mac_addr(hin->src));
+ printk(KERN_INFO "aoe: can't find target e%ld.%d:%pm\n",
+ d->aoemajor, d->aoeminor, hin->src);
spin_unlock_irqrestore(&d->lock, flags);
return;
}
@@ -1036,10 +1034,10 @@ aoecmd_cfg_rsp(struct sk_buff *skb)
n = n ? n * 512 : DEFAULTBCNT;
if (n != ifp->maxbcnt) {
printk(KERN_INFO
- "aoe: e%ld.%d: setting %d%s%s:%012llx\n",
+ "aoe: e%ld.%d: setting %d%s%s:%pm\n",
d->aoemajor, d->aoeminor, n,
" byte data frames on ", ifp->nd->name,
- mac_addr(t->addr));
+ t->addr);
ifp->maxbcnt = n;
}
}
diff --git a/drivers/block/aoe/aoenet.c b/drivers/block/aoe/aoenet.c
index 9157d64270cb..30de5b1c647e 100644
--- a/drivers/block/aoe/aoenet.c
+++ b/drivers/block/aoe/aoenet.c
@@ -83,17 +83,6 @@ set_aoe_iflist(const char __user *user_str, size_t size)
return 0;
}
-unsigned long long
-mac_addr(char addr[6])
-{
- __be64 n = 0;
- char *p = (char *) &n;
-
- memcpy(p + 2, addr, 6); /* (sizeof addr != 6) */
-
- return (unsigned long long) __be64_to_cpu(n);
-}
-
void
aoenet_xmit(struct sk_buff_head *queue)
{
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 12de1fdaa6c6..9f7c543cc04b 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -1693,6 +1693,11 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time)
for (i = 0; i <= h->highest_lun; i++) {
int j;
drv_found = 0;
+
+ /* skip holes in the array from already deleted drives */
+ if (h->drv[i].raid_level == -1)
+ continue;
+
for (j = 0; j < num_luns; j++) {
memcpy(&lunid, &ld_buff->LUN[j][0], 4);
lunid = le32_to_cpu(lunid);
@@ -2847,7 +2852,7 @@ static void do_cciss_request(struct request_queue *q)
h->maxSG = seg;
#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss: Submitting %d sectors in %d segments\n",
+ printk(KERN_DEBUG "cciss: Submitting %lu sectors in %d segments\n",
creq->nr_sectors, seg);
#endif /* CCISS_DEBUG */
@@ -3197,7 +3202,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
c->paddr = pci_resource_start(pdev, 0); /* addressing mode bits already removed */
#ifdef CCISS_DEBUG
- printk("address 0 = %x\n", c->paddr);
+ printk("address 0 = %lx\n", c->paddr);
#endif /* CCISS_DEBUG */
c->vaddr = remap_pci_mem(c->paddr, 0x250);
@@ -3224,7 +3229,8 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
#endif /* CCISS_DEBUG */
cfg_base_addr_index = find_PCI_BAR_index(pdev, cfg_base_addr);
#ifdef CCISS_DEBUG
- printk("cfg base address index = %x\n", cfg_base_addr_index);
+ printk("cfg base address index = %llx\n",
+ (unsigned long long)cfg_base_addr_index);
#endif /* CCISS_DEBUG */
if (cfg_base_addr_index == -1) {
printk(KERN_WARNING "cciss: Cannot find cfg_base_addr_index\n");
@@ -3234,7 +3240,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
cfg_offset = readl(c->vaddr + SA5_CTMEM_OFFSET);
#ifdef CCISS_DEBUG
- printk("cfg offset = %x\n", cfg_offset);
+ printk("cfg offset = %llx\n", (unsigned long long)cfg_offset);
#endif /* CCISS_DEBUG */
c->cfgtable = remap_pci_mem(pci_resource_start(pdev,
cfg_base_addr_index) +
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 14db747a636e..cf29cc4e6ab7 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4124,7 +4124,7 @@ static int __init floppy_setup(char *str)
printk("\n");
} else
DPRINT("botched floppy option\n");
- DPRINT("Read Documentation/floppy.txt\n");
+ DPRINT("Read Documentation/blockdev/floppy.txt\n");
return 0;
}
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 5c4ee70d5cf3..fb06ed659212 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -936,8 +936,10 @@ loop_set_status(struct loop_device *lo, const struct loop_info64 *info)
{
int err;
struct loop_func_table *xfer;
+ uid_t uid = current_uid();
- if (lo->lo_encrypt_key_size && lo->lo_key_owner != current->uid &&
+ if (lo->lo_encrypt_key_size &&
+ lo->lo_key_owner != uid &&
!capable(CAP_SYS_ADMIN))
return -EPERM;
if (lo->lo_state != Lo_bound)
@@ -992,7 +994,7 @@ loop_set_status(struct loop_device *lo, const struct loop_info64 *info)
if (info->lo_encrypt_key_size) {
memcpy(lo->lo_encrypt_key, info->lo_encrypt_key,
info->lo_encrypt_key_size);
- lo->lo_key_owner = current->uid;
+ lo->lo_key_owner = uid;
}
return 0;
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index f20bf359b84f..dc7a8c352da2 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -302,7 +302,7 @@ static struct kobj_type kobj_pkt_type_wqueue = {
static void pkt_sysfs_dev_new(struct pktcdvd_device *pd)
{
if (class_pktcdvd) {
- pd->dev = device_create(class_pktcdvd, NULL, pd->pkt_dev, NULL,
+ pd->dev = device_create(class_pktcdvd, NULL, MKDEV(0, 0), NULL,
"%s", pd->name);
if (IS_ERR(pd->dev))
pd->dev = NULL;
@@ -2790,7 +2790,7 @@ static int pkt_new_dev(struct pktcdvd_device *pd, dev_t dev)
return 0;
out_mem:
- blkdev_put(bdev, FMODE_READ|FMODE_WRITE);
+ blkdev_put(bdev, FMODE_READ | FMODE_NDELAY);
/* This is safe: open() is still holding a reference. */
module_put(THIS_MODULE);
return ret;
@@ -2975,7 +2975,7 @@ static int pkt_remove_dev(dev_t pkt_dev)
pkt_debugfs_dev_remove(pd);
pkt_sysfs_dev_remove(pd);
- blkdev_put(pd->bdev, FMODE_READ|FMODE_WRITE);
+ blkdev_put(pd->bdev, FMODE_READ | FMODE_NDELAY);
remove_proc_entry(pd->name, pkt_proc);
DPRINTK(DRIVER_NAME": writer %s unmapped\n", pd->name);
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index fccac18d3111..048d71d244d7 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -1546,8 +1546,6 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd)
/*
* Reset management
- * XXX Move usb_reset_device to khubd. Hogging kevent is not a good thing.
- * XXX Make usb_sync_reset asynchronous.
*/
static void ub_reset_enter(struct ub_dev *sc, int try)
@@ -1633,6 +1631,22 @@ static void ub_reset_task(struct work_struct *work)
}
/*
+ * XXX Reset brackets are too much hassle to implement, so just stub them
+ * in order to prevent forced unbinding (which deadlocks solid when our
+ * ->disconnect method waits for the reset to complete and this kills keventd).
+ *
+ * XXX Tell Alan to move usb_unlock_device inside of usb_reset_device,
+ * or else the post_reset is invoked, and restats I/O on a locked device.
+ */
+static int ub_pre_reset(struct usb_interface *iface) {
+ return 0;
+}
+
+static int ub_post_reset(struct usb_interface *iface) {
+ return 0;
+}
+
+/*
* This is called from a process context.
*/
static void ub_revalidate(struct ub_dev *sc, struct ub_lun *lun)
@@ -2446,6 +2460,8 @@ static struct usb_driver ub_driver = {
.probe = ub_probe,
.disconnect = ub_disconnect,
.id_table = ub_usb_ids,
+ .pre_reset = ub_pre_reset,
+ .post_reset = ub_post_reset,
};
static int __init ub_init(void)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index b220c686089d..2d19f0cc47f2 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -338,12 +338,18 @@ wait:
static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size)
{
struct request_queue *rq;
+ elevator_t *old_e;
rq = blk_init_queue(do_blkif_request, &blkif_io_lock);
if (rq == NULL)
return -1;
- elevator_init(rq, "noop");
+ old_e = rq->elevator;
+ if (IS_ERR_VALUE(elevator_init(rq, "noop")))
+ printk(KERN_WARNING
+ "blkfront: Switch elevator failed, use default\n");
+ else
+ elevator_exit(old_e);
/* Hard sector size and max sectors impersonate the equiv. hardware. */
blk_queue_hardsect_size(rq, sector_size);
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index ecab9e67d47a..29e1dfafb7c6 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -194,7 +194,7 @@ struct ace_device {
int in_irq;
/* Details of hardware device */
- unsigned long physaddr;
+ resource_size_t physaddr;
void __iomem *baseaddr;
int irq;
int bus_width; /* 0 := 8 bit; 1 := 16 bit */
@@ -628,8 +628,8 @@ static void ace_fsm_dostate(struct ace_device *ace)
/* Okay, it's a data request, set it up for transfer */
dev_dbg(ace->dev,
- "request: sec=%lx hcnt=%lx, ccnt=%x, dir=%i\n",
- req->sector, req->hard_nr_sectors,
+ "request: sec=%llx hcnt=%lx, ccnt=%x, dir=%i\n",
+ (unsigned long long) req->sector, req->hard_nr_sectors,
req->current_nr_sectors, rq_data_dir(req));
ace->req = req;
@@ -935,7 +935,8 @@ static int __devinit ace_setup(struct ace_device *ace)
int rc;
dev_dbg(ace->dev, "ace_setup(ace=0x%p)\n", ace);
- dev_dbg(ace->dev, "physaddr=0x%lx irq=%i\n", ace->physaddr, ace->irq);
+ dev_dbg(ace->dev, "physaddr=0x%llx irq=%i\n",
+ (unsigned long long)ace->physaddr, ace->irq);
spin_lock_init(&ace->lock);
init_completion(&ace->id_completion);
@@ -1017,8 +1018,8 @@ static int __devinit ace_setup(struct ace_device *ace)
/* Print the identification */
dev_info(ace->dev, "Xilinx SystemACE revision %i.%i.%i\n",
(version >> 12) & 0xf, (version >> 8) & 0x0f, version & 0xff);
- dev_dbg(ace->dev, "physaddr 0x%lx, mapped to 0x%p, irq=%i\n",
- ace->physaddr, ace->baseaddr, ace->irq);
+ dev_dbg(ace->dev, "physaddr 0x%llx, mapped to 0x%p, irq=%i\n",
+ (unsigned long long) ace->physaddr, ace->baseaddr, ace->irq);
ace->media_change = 1;
ace_revalidate_disk(ace->gd);
@@ -1035,8 +1036,8 @@ err_alloc_disk:
err_blk_initq:
iounmap(ace->baseaddr);
err_ioremap:
- dev_info(ace->dev, "xsysace: error initializing device at 0x%lx\n",
- ace->physaddr);
+ dev_info(ace->dev, "xsysace: error initializing device at 0x%llx\n",
+ (unsigned long long) ace->physaddr);
return -ENOMEM;
}
@@ -1059,7 +1060,7 @@ static void __devexit ace_teardown(struct ace_device *ace)
}
static int __devinit
-ace_alloc(struct device *dev, int id, unsigned long physaddr,
+ace_alloc(struct device *dev, int id, resource_size_t physaddr,
int irq, int bus_width)
{
struct ace_device *ace;
@@ -1119,7 +1120,7 @@ static void __devexit ace_free(struct device *dev)
static int __devinit ace_probe(struct platform_device *dev)
{
- unsigned long physaddr = 0;
+ resource_size_t physaddr = 0;
int bus_width = ACE_BUS_WIDTH_16; /* FIXME: should not be hard coded */
int id = dev->id;
int irq = NO_IRQ;
@@ -1165,7 +1166,7 @@ static int __devinit
ace_of_probe(struct of_device *op, const struct of_device_id *match)
{
struct resource res;
- unsigned long physaddr;
+ resource_size_t physaddr;
const u32 *id;
int irq, bus_width, rc;
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-16 16:12:34 +0300