summaryrefslogtreecommitdiff
path: root/drivers/block
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/block')
-rw-r--r--drivers/block/Kconfig10
-rw-r--r--drivers/block/Makefile1
-rw-r--r--drivers/block/aoe/aoenet.c2
-rw-r--r--drivers/block/cciss.c274
-rw-r--r--drivers/block/cciss_scsi.c12
-rw-r--r--drivers/block/cryptoloop.c1
-rw-r--r--drivers/block/floppy.c5
-rw-r--r--drivers/block/loop.c26
-rw-r--r--drivers/block/nbd.c12
-rw-r--r--drivers/block/pktcdvd.c21
-rw-r--r--drivers/block/ps2esdi.c1079
-rw-r--r--drivers/block/sx8.c6
-rw-r--r--drivers/block/ub.c38
-rw-r--r--drivers/block/viodasd.c5
-rw-r--r--drivers/block/virtio_blk.c1
-rw-r--r--drivers/block/xen-blkfront.c18
16 files changed, 278 insertions, 1233 deletions
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index b6d230b3209f..0d1d2133d9bc 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -44,16 +44,6 @@ config MAC_FLOPPY
If you have a SWIM-3 (Super Woz Integrated Machine 3; from Apple)
floppy controller, say Y here. Most commonly found in PowerMacs.
-config BLK_DEV_PS2
- tristate "PS/2 ESDI hard disk support"
- depends on MCA && MCA_LEGACY && BROKEN
- help
- Say Y here if you have a PS/2 machine with a MCA bus and an ESDI
- hard disk.
-
- To compile this driver as a module, choose M here: the
- module will be called ps2esdi.
-
config AMIGA_Z2RAM
tristate "Amiga Zorro II ramdisk support"
depends on ZORRO
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index 01c972415cb2..5e584306be99 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_ATARI_FLOPPY) += ataflop.o
obj-$(CONFIG_AMIGA_Z2RAM) += z2ram.o
obj-$(CONFIG_BLK_DEV_RAM) += brd.o
obj-$(CONFIG_BLK_DEV_LOOP) += loop.o
-obj-$(CONFIG_BLK_DEV_PS2) += ps2esdi.o
obj-$(CONFIG_BLK_DEV_XD) += xd.o
obj-$(CONFIG_BLK_CPQ_DA) += cpqarray.o
obj-$(CONFIG_BLK_CPQ_CISS_DA) += cciss.o
diff --git a/drivers/block/aoe/aoenet.c b/drivers/block/aoe/aoenet.c
index 8460ef736d56..18d243c73eee 100644
--- a/drivers/block/aoe/aoenet.c
+++ b/drivers/block/aoe/aoenet.c
@@ -115,7 +115,7 @@ aoenet_rcv(struct sk_buff *skb, struct net_device *ifp, struct packet_type *pt,
struct aoe_hdr *h;
u32 n;
- if (ifp->nd_net != &init_net)
+ if (dev_net(ifp) != &init_net)
goto exit;
skb = skb_share_check(skb, GFP_ATOMIC);
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 9715be3f2487..cf6083a1f928 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -33,6 +33,7 @@
#include <linux/blkpg.h>
#include <linux/timer.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/init.h>
#include <linux/hdreg.h>
#include <linux/spinlock.h>
@@ -49,6 +50,7 @@
#include <scsi/sg.h>
#include <scsi/scsi_ioctl.h>
#include <linux/cdrom.h>
+#include <linux/scatterlist.h>
#define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
#define DRIVER_NAME "HP CISS Driver (v 3.6.14)"
@@ -131,7 +133,6 @@ static struct board_type products[] = {
/*define how many times we will try a command because of bus resets */
#define MAX_CMD_RETRIES 3
-#define READ_AHEAD 1024
#define MAX_CTLR 32
/* Originally cciss driver only supports 8 major numbers */
@@ -174,8 +175,6 @@ static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size,
static void fail_all_cmds(unsigned long ctlr);
#ifdef CONFIG_PROC_FS
-static int cciss_proc_get_info(char *buffer, char **start, off_t offset,
- int length, int *eof, void *data);
static void cciss_procinit(int i);
#else
static void cciss_procinit(int i)
@@ -240,24 +239,46 @@ static inline CommandList_struct *removeQ(CommandList_struct **Qptr,
*/
#define ENG_GIG 1000000000
#define ENG_GIG_FACTOR (ENG_GIG/512)
+#define ENGAGE_SCSI "engage scsi"
static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
"UNKNOWN"
};
static struct proc_dir_entry *proc_cciss;
-static int cciss_proc_get_info(char *buffer, char **start, off_t offset,
- int length, int *eof, void *data)
+static void cciss_seq_show_header(struct seq_file *seq)
{
- off_t pos = 0;
- off_t len = 0;
- int size, i, ctlr;
- ctlr_info_t *h = (ctlr_info_t *) data;
- drive_info_struct *drv;
- unsigned long flags;
- sector_t vol_sz, vol_sz_frac;
+ ctlr_info_t *h = seq->private;
+
+ seq_printf(seq, "%s: HP %s Controller\n"
+ "Board ID: 0x%08lx\n"
+ "Firmware Version: %c%c%c%c\n"
+ "IRQ: %d\n"
+ "Logical drives: %d\n"
+ "Current Q depth: %d\n"
+ "Current # commands on controller: %d\n"
+ "Max Q depth since init: %d\n"
+ "Max # commands on controller since init: %d\n"
+ "Max SG entries since init: %d\n",
+ h->devname,
+ h->product_name,
+ (unsigned long)h->board_id,
+ h->firm_ver[0], h->firm_ver[1], h->firm_ver[2],
+ h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT],
+ h->num_luns,
+ h->Qdepth, h->commands_outstanding,
+ h->maxQsinceinit, h->max_outstanding, h->maxSG);
- ctlr = h->ctlr;
+#ifdef CONFIG_CISS_SCSI_TAPE
+ cciss_seq_tape_report(seq, h->ctlr);
+#endif /* CONFIG_CISS_SCSI_TAPE */
+}
+
+static void *cciss_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ ctlr_info_t *h = seq->private;
+ unsigned ctlr = h->ctlr;
+ unsigned long flags;
/* prevent displaying bogus info during configuration
* or deconfiguration of a logical volume
@@ -265,115 +286,155 @@ static int cciss_proc_get_info(char *buffer, char **start, off_t offset,
spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
if (h->busy_configuring) {
spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
- return -EBUSY;
+ return ERR_PTR(-EBUSY);
}
h->busy_configuring = 1;
spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
- size = sprintf(buffer, "%s: HP %s Controller\n"
- "Board ID: 0x%08lx\n"
- "Firmware Version: %c%c%c%c\n"
- "IRQ: %d\n"
- "Logical drives: %d\n"
- "Max sectors: %d\n"
- "Current Q depth: %d\n"
- "Current # commands on controller: %d\n"
- "Max Q depth since init: %d\n"
- "Max # commands on controller since init: %d\n"
- "Max SG entries since init: %d\n\n",
- h->devname,
- h->product_name,
- (unsigned long)h->board_id,
- h->firm_ver[0], h->firm_ver[1], h->firm_ver[2],
- h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT],
- h->num_luns,
- h->cciss_max_sectors,
- h->Qdepth, h->commands_outstanding,
- h->maxQsinceinit, h->max_outstanding, h->maxSG);
-
- pos += size;
- len += size;
- cciss_proc_tape_report(ctlr, buffer, &pos, &len);
- for (i = 0; i <= h->highest_lun; i++) {
-
- drv = &h->drv[i];
- if (drv->heads == 0)
- continue;
+ if (*pos == 0)
+ cciss_seq_show_header(seq);
- vol_sz = drv->nr_blocks;
- vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR);
- vol_sz_frac *= 100;
- sector_div(vol_sz_frac, ENG_GIG_FACTOR);
+ return pos;
+}
+
+static int cciss_seq_show(struct seq_file *seq, void *v)
+{
+ sector_t vol_sz, vol_sz_frac;
+ ctlr_info_t *h = seq->private;
+ unsigned ctlr = h->ctlr;
+ loff_t *pos = v;
+ drive_info_struct *drv = &h->drv[*pos];
+
+ if (*pos > h->highest_lun)
+ return 0;
+
+ if (drv->heads == 0)
+ return 0;
+
+ vol_sz = drv->nr_blocks;
+ vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR);
+ vol_sz_frac *= 100;
+ sector_div(vol_sz_frac, ENG_GIG_FACTOR);
+
+ if (drv->raid_level > 5)
+ drv->raid_level = RAID_UNKNOWN;
+ seq_printf(seq, "cciss/c%dd%d:"
+ "\t%4u.%02uGB\tRAID %s\n",
+ ctlr, (int) *pos, (int)vol_sz, (int)vol_sz_frac,
+ raid_label[drv->raid_level]);
+ return 0;
+}
+
+static void *cciss_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ ctlr_info_t *h = seq->private;
+
+ if (*pos > h->highest_lun)
+ return NULL;
+ *pos += 1;
+
+ return pos;
+}
+
+static void cciss_seq_stop(struct seq_file *seq, void *v)
+{
+ ctlr_info_t *h = seq->private;
+
+ /* Only reset h->busy_configuring if we succeeded in setting
+ * it during cciss_seq_start. */
+ if (v == ERR_PTR(-EBUSY))
+ return;
- if (drv->raid_level > 5)
- drv->raid_level = RAID_UNKNOWN;
- size = sprintf(buffer + len, "cciss/c%dd%d:"
- "\t%4u.%02uGB\tRAID %s\n",
- ctlr, i, (int)vol_sz, (int)vol_sz_frac,
- raid_label[drv->raid_level]);
- pos += size;
- len += size;
- }
-
- *eof = 1;
- *start = buffer + offset;
- len -= offset;
- if (len > length)
- len = length;
h->busy_configuring = 0;
- return len;
}
-static int
-cciss_proc_write(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
+static struct seq_operations cciss_seq_ops = {
+ .start = cciss_seq_start,
+ .show = cciss_seq_show,
+ .next = cciss_seq_next,
+ .stop = cciss_seq_stop,
+};
+
+static int cciss_seq_open(struct inode *inode, struct file *file)
{
- unsigned char cmd[80];
- int len;
-#ifdef CONFIG_CISS_SCSI_TAPE
- ctlr_info_t *h = (ctlr_info_t *) data;
- int rc;
+ int ret = seq_open(file, &cciss_seq_ops);
+ struct seq_file *seq = file->private_data;
+
+ if (!ret)
+ seq->private = PDE(inode)->data;
+
+ return ret;
+}
+
+static ssize_t
+cciss_proc_write(struct file *file, const char __user *buf,
+ size_t length, loff_t *ppos)
+{
+ int err;
+ char *buffer;
+
+#ifndef CONFIG_CISS_SCSI_TAPE
+ return -EINVAL;
#endif
- if (count > sizeof(cmd) - 1)
+ if (!buf || length > PAGE_SIZE - 1)
return -EINVAL;
- if (copy_from_user(cmd, buffer, count))
- return -EFAULT;
- cmd[count] = '\0';
- len = strlen(cmd); // above 3 lines ensure safety
- if (len && cmd[len - 1] == '\n')
- cmd[--len] = '\0';
-# ifdef CONFIG_CISS_SCSI_TAPE
- if (strcmp("engage scsi", cmd) == 0) {
+
+ buffer = (char *)__get_free_page(GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ err = -EFAULT;
+ if (copy_from_user(buffer, buf, length))
+ goto out;
+ buffer[length] = '\0';
+
+#ifdef CONFIG_CISS_SCSI_TAPE
+ if (strncmp(ENGAGE_SCSI, buffer, sizeof ENGAGE_SCSI - 1) == 0) {
+ struct seq_file *seq = file->private_data;
+ ctlr_info_t *h = seq->private;
+ int rc;
+
rc = cciss_engage_scsi(h->ctlr);
if (rc != 0)
- return -rc;
- return count;
- }
+ err = -rc;
+ else
+ err = length;
+ } else
+#endif /* CONFIG_CISS_SCSI_TAPE */
+ err = -EINVAL;
/* might be nice to have "disengage" too, but it's not
safely possible. (only 1 module use count, lock issues.) */
-# endif
- return -EINVAL;
+
+out:
+ free_page((unsigned long)buffer);
+ return err;
}
-/*
- * Get us a file in /proc/cciss that says something about each controller.
- * Create /proc/cciss if it doesn't exist yet.
- */
+static struct file_operations cciss_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = cciss_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+ .write = cciss_proc_write,
+};
+
static void __devinit cciss_procinit(int i)
{
struct proc_dir_entry *pde;
- if (proc_cciss == NULL) {
+ if (proc_cciss == NULL)
proc_cciss = proc_mkdir("cciss", proc_root_driver);
- if (!proc_cciss)
- return;
- }
+ if (!proc_cciss)
+ return;
+ pde = proc_create(hba[i]->devname, S_IWUSR | S_IRUSR | S_IRGRP |
+ S_IROTH, proc_cciss,
+ &cciss_proc_fops);
+ if (!pde)
+ return;
- pde = create_proc_read_entry(hba[i]->devname,
- S_IWUSR | S_IRUSR | S_IRGRP | S_IROTH,
- proc_cciss, cciss_proc_get_info, hba[i]);
- pde->write_proc = cciss_proc_write;
+ pde->data = hba[i];
}
#endif /* CONFIG_PROC_FS */
@@ -1288,6 +1349,10 @@ static void cciss_update_drive_info(int ctlr, int drv_index)
spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
h->drv[drv_index].busy_configuring = 1;
spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+
+ /* deregister_disk sets h->drv[drv_index].queue = NULL */
+ /* which keeps the interrupt handler from starting */
+ /* the queue. */
ret = deregister_disk(h->gendisk[drv_index],
&h->drv[drv_index], 0);
h->drv[drv_index].busy_configuring = 0;
@@ -1341,7 +1406,6 @@ geo_inq:
disk->private_data = &h->drv[drv_index];
/* Set up queue information */
- disk->queue->backing_dev_info.ra_pages = READ_AHEAD;
blk_queue_bounce_limit(disk->queue, hba[ctlr]->pdev->dma_mask);
/* This is a hardware imposed limit. */
@@ -1359,6 +1423,10 @@ geo_inq:
blk_queue_hardsect_size(disk->queue,
hba[ctlr]->drv[drv_index].block_size);
+ /* Make sure all queue data is written out before */
+ /* setting h->drv[drv_index].queue, as setting this */
+ /* allows the interrupt handler to start the queue */
+ wmb();
h->drv[drv_index].queue = disk->queue;
add_disk(disk);
}
@@ -3434,7 +3502,6 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
}
drv->queue = q;
- q->backing_dev_info.ra_pages = READ_AHEAD;
blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask);
/* This is a hardware imposed limit. */
@@ -3461,10 +3528,17 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
continue;
blk_queue_hardsect_size(q, drv->block_size);
set_capacity(disk, drv->nr_blocks);
- add_disk(disk);
j++;
} while (j <= hba[i]->highest_lun);
+ /* Make sure all queue data is written out before */
+ /* interrupt handler, triggered by add_disk, */
+ /* is allowed to start them. */
+ wmb();
+
+ for (j = 0; j <= hba[i]->highest_lun; j++)
+ add_disk(hba[i]->gendisk[j]);
+
return 1;
clean4:
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index 55178e9973a0..e4bf9a11ca0d 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -1349,9 +1349,9 @@ cciss_unregister_scsi(int ctlr)
/* set scsi_host to NULL so our detect routine will
find us on register */
sa->scsi_host = NULL;
+ spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
scsi_cmd_stack_free(ctlr);
kfree(sa);
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
}
static int
@@ -1404,21 +1404,18 @@ cciss_engage_scsi(int ctlr)
}
static void
-cciss_proc_tape_report(int ctlr, unsigned char *buffer, off_t *pos, off_t *len)
+cciss_seq_tape_report(struct seq_file *seq, int ctlr)
{
unsigned long flags;
- int size;
-
- *pos = *pos -1; *len = *len - 1; // cut off the last trailing newline
CPQ_TAPE_LOCK(ctlr, flags);
- size = sprintf(buffer + *len,
+ seq_printf(seq,
"Sequential access devices: %d\n\n",
ccissscsi[ctlr].ndevices);
CPQ_TAPE_UNLOCK(ctlr, flags);
- *pos += size; *len += size;
}
+
/* Need at least one of these error handlers to keep ../scsi/hosts.c from
* complaining. Doing a host- or bus-reset can't do anything good here.
* Despite what it might say in scsi_error.c, there may well be commands
@@ -1498,6 +1495,5 @@ static int cciss_eh_abort_handler(struct scsi_cmnd *scsicmd)
#define cciss_scsi_setup(cntl_num)
#define cciss_unregister_scsi(ctlr)
#define cciss_register_scsi(ctlr)
-#define cciss_proc_tape_report(ctlr, buffer, pos, len)
#endif /* CONFIG_CISS_SCSI_TAPE */
diff --git a/drivers/block/cryptoloop.c b/drivers/block/cryptoloop.c
index 241167878edf..8b6bb764b0a3 100644
--- a/drivers/block/cryptoloop.c
+++ b/drivers/block/cryptoloop.c
@@ -27,7 +27,6 @@
#include <linux/blkdev.h>
#include <linux/loop.h>
#include <linux/scatterlist.h>
-#include <asm/semaphore.h>
#include <asm/uaccess.h>
MODULE_LICENSE("GPL");
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 32c79a55511b..7652e87d60c5 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -217,7 +217,6 @@ static int use_virtual_dma;
*/
static DEFINE_SPINLOCK(floppy_lock);
-static struct completion device_release;
static unsigned short virtual_dma_port = 0x3f0;
irqreturn_t floppy_interrupt(int irq, void *dev_id);
@@ -4144,7 +4143,6 @@ DEVICE_ATTR(cmos,S_IRUGO,floppy_cmos_show,NULL);
static void floppy_device_release(struct device *dev)
{
- complete(&device_release);
}
static struct platform_device floppy_device[N_DRIVE];
@@ -4539,7 +4537,6 @@ void cleanup_module(void)
{
int drive;
- init_completion(&device_release);
blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256);
unregister_blkdev(FLOPPY_MAJOR, "fd");
@@ -4564,8 +4561,6 @@ void cleanup_module(void)
/* eject disk, if any */
fd_eject(0);
-
- wait_for_completion(&device_release);
}
module_param(floppy, charp, 0);
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 91ebb007416c..f7f163557aa0 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -82,6 +82,9 @@
static LIST_HEAD(loop_devices);
static DEFINE_MUTEX(loop_devices_mutex);
+static int max_part;
+static int part_shift;
+
/*
* Transfer functions
*/
@@ -692,6 +695,8 @@ static int loop_change_fd(struct loop_device *lo, struct file *lo_file,
goto out_putf;
fput(old_file);
+ if (max_part > 0)
+ ioctl_by_bdev(bdev, BLKRRPART, 0);
return 0;
out_putf:
@@ -819,6 +824,8 @@ static int loop_set_fd(struct loop_device *lo, struct file *lo_file,
}
lo->lo_state = Lo_bound;
wake_up_process(lo->lo_thread);
+ if (max_part > 0)
+ ioctl_by_bdev(bdev, BLKRRPART, 0);
return 0;
out_clr:
@@ -919,6 +926,8 @@ static int loop_clr_fd(struct loop_device *lo, struct block_device *bdev)
fput(filp);
/* This is safe: open() is still holding a reference. */
module_put(THIS_MODULE);
+ if (max_part > 0)
+ ioctl_by_bdev(bdev, BLKRRPART, 0);
return 0;
}
@@ -1360,6 +1369,8 @@ static struct block_device_operations lo_fops = {
static int max_loop;
module_param(max_loop, int, 0);
MODULE_PARM_DESC(max_loop, "Maximum number of loop devices");
+module_param(max_part, int, 0);
+MODULE_PARM_DESC(max_part, "Maximum number of partitions per loop device");
MODULE_LICENSE("GPL");
MODULE_ALIAS_BLOCKDEV_MAJOR(LOOP_MAJOR);
@@ -1412,7 +1423,7 @@ static struct loop_device *loop_alloc(int i)
if (!lo->lo_queue)
goto out_free_dev;
- disk = lo->lo_disk = alloc_disk(1);
+ disk = lo->lo_disk = alloc_disk(1 << part_shift);
if (!disk)
goto out_free_queue;
@@ -1422,7 +1433,7 @@ static struct loop_device *loop_alloc(int i)
init_waitqueue_head(&lo->lo_event);
spin_lock_init(&lo->lo_lock);
disk->major = LOOP_MAJOR;
- disk->first_minor = i;
+ disk->first_minor = i << part_shift;
disk->fops = &lo_fops;
disk->private_data = lo;
disk->queue = lo->lo_queue;
@@ -1502,7 +1513,12 @@ static int __init loop_init(void)
* themselves and have kernel automatically instantiate actual
* device on-demand.
*/
- if (max_loop > 1UL << MINORBITS)
+
+ part_shift = 0;
+ if (max_part > 0)
+ part_shift = fls(max_part);
+
+ if (max_loop > 1UL << (MINORBITS - part_shift))
return -EINVAL;
if (max_loop) {
@@ -1510,7 +1526,7 @@ static int __init loop_init(void)
range = max_loop;
} else {
nr = 8;
- range = 1UL << MINORBITS;
+ range = 1UL << (MINORBITS - part_shift);
}
if (register_blkdev(LOOP_MAJOR, "loop"))
@@ -1549,7 +1565,7 @@ static void __exit loop_exit(void)
unsigned long range;
struct loop_device *lo, *next;
- range = max_loop ? max_loop : 1UL << MINORBITS;
+ range = max_loop ? max_loop : 1UL << (MINORBITS - part_shift);
list_for_each_entry_safe(lo, next, &loop_devices, lo_list)
loop_del_one(lo);
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 018753c59b8e..60cc54368b66 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -153,6 +153,12 @@ static int sock_xmit(struct nbd_device *lo, int send, void *buf, int size,
struct kvec iov;
sigset_t blocked, oldset;
+ if (unlikely(!sock)) {
+ printk(KERN_ERR "%s: Attempted %s on closed socket in sock_xmit\n",
+ lo->disk->disk_name, (send ? "send" : "recv"));
+ return -EINVAL;
+ }
+
/* Allow interception of SIGKILL only
* Don't allow other signals to interrupt the transmission */
siginitsetinv(&blocked, sigmask(SIGKILL));
@@ -655,6 +661,7 @@ static int __init nbd_init(void)
for (i = 0; i < nbds_max; i++) {
struct gendisk *disk = alloc_disk(1);
+ elevator_t *old_e;
if (!disk)
goto out;
nbd_dev[i].disk = disk;
@@ -668,6 +675,11 @@ static int __init nbd_init(void)
put_disk(disk);
goto out;
}
+ old_e = disk->queue->elevator;
+ if (elevator_init(disk->queue, "deadline") == 0 ||
+ elevator_init(disk->queue, "noop") == 0) {
+ elevator_exit(old_e);
+ }
}
if (register_blkdev(NBD_MAJOR, "nbd")) {
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index 674cd66dcaba..18feb1c7c33b 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -849,7 +849,8 @@ static int pkt_flush_cache(struct pktcdvd_device *pd)
/*
* speed is given as the normal factor, e.g. 4 for 4x
*/
-static int pkt_set_speed(struct pktcdvd_device *pd, unsigned write_speed, unsigned read_speed)
+static noinline_for_stack int pkt_set_speed(struct pktcdvd_device *pd,
+ unsigned write_speed, unsigned read_speed)
{
struct packet_command cgc;
struct request_sense sense;
@@ -1776,7 +1777,8 @@ static int pkt_get_track_info(struct pktcdvd_device *pd, __u16 track, __u8 type,
return pkt_generic_packet(pd, &cgc);
}
-static int pkt_get_last_written(struct pktcdvd_device *pd, long *last_written)
+static noinline_for_stack int pkt_get_last_written(struct pktcdvd_device *pd,
+ long *last_written)
{
disc_information di;
track_information ti;
@@ -1813,7 +1815,7 @@ static int pkt_get_last_written(struct pktcdvd_device *pd, long *last_written)
/*
* write mode select package based on pd->settings
*/
-static int pkt_set_write_settings(struct pktcdvd_device *pd)
+static noinline_for_stack int pkt_set_write_settings(struct pktcdvd_device *pd)
{
struct packet_command cgc;
struct request_sense sense;
@@ -1972,7 +1974,7 @@ static int pkt_writable_disc(struct pktcdvd_device *pd, disc_information *di)
return 1;
}
-static int pkt_probe_settings(struct pktcdvd_device *pd)
+static noinline_for_stack int pkt_probe_settings(struct pktcdvd_device *pd)
{
struct packet_command cgc;
unsigned char buf[12];
@@ -2071,7 +2073,8 @@ static int pkt_probe_settings(struct pktcdvd_device *pd)
/*
* enable/disable write caching on drive
*/
-static int pkt_write_caching(struct pktcdvd_device *pd, int set)
+static noinline_for_stack int pkt_write_caching(struct pktcdvd_device *pd,
+ int set)
{
struct packet_command cgc;
struct request_sense sense;
@@ -2116,7 +2119,8 @@ static int pkt_lock_door(struct pktcdvd_device *pd, int lockflag)
/*
* Returns drive maximum write speed
*/
-static int pkt_get_max_speed(struct pktcdvd_device *pd, unsigned *write_speed)
+static noinline_for_stack int pkt_get_max_speed(struct pktcdvd_device *pd,
+ unsigned *write_speed)
{
struct packet_command cgc;
struct request_sense sense;
@@ -2177,7 +2181,8 @@ static char us_clv_to_speed[16] = {
/*
* reads the maximum media speed from ATIP
*/
-static int pkt_media_speed(struct pktcdvd_device *pd, unsigned *speed)
+static noinline_for_stack int pkt_media_speed(struct pktcdvd_device *pd,
+ unsigned *speed)
{
struct packet_command cgc;
struct request_sense sense;
@@ -2249,7 +2254,7 @@ static int pkt_media_speed(struct pktcdvd_device *pd, unsigned *speed)
}
}
-static int pkt_perform_opc(struct pktcdvd_device *pd)
+static noinline_for_stack int pkt_perform_opc(struct pktcdvd_device *pd)
{
struct packet_command cgc;
struct request_sense sense;
diff --git a/drivers/block/ps2esdi.c b/drivers/block/ps2esdi.c
deleted file mode 100644
index 3c796e236253..000000000000
--- a/drivers/block/ps2esdi.c
+++ /dev/null
@@ -1,1079 +0,0 @@
-/* ps2esdi driver based on assembler code by Arindam Banerji,
- written by Peter De Schrijver */
-/* Reassuring note to IBM : This driver was NOT developed by vice-versa
- engineering the PS/2's BIOS */
-/* Dedicated to Wannes, Tofke, Ykke, Godot, Killroy and all those
- other lovely fish out there... */
-/* This code was written during the long and boring WINA
- elections 1994 */
-/* Thanks to Arindam Banerij for giving me the source of his driver */
-/* This code may be freely distributed and modified in any way,
- as long as these notes remain intact */
-
-/* Revised: 05/07/94 by Arindam Banerji (axb@cse.nd.edu) */
-/* Revised: 09/08/94 by Peter De Schrijver (stud11@cc4.kuleuven.ac.be)
- Thanks to Arindam Banerij for sending me the docs of the adapter */
-
-/* BA Modified for ThinkPad 720 by Boris Ashkinazi */
-/* (bash@vnet.ibm.com) 08/08/95 */
-
-/* Modified further for ThinkPad-720C by Uri Blumenthal */
-/* (uri@watson.ibm.com) Sep 11, 1995 */
-
-/* TODO :
- + Timeouts
- + Get disk parameters
- + DMA above 16MB
- + reset after read/write error
- */
-
-#define DEVICE_NAME "PS/2 ESDI"
-
-#include <linux/major.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/interrupt.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/genhd.h>
-#include <linux/ps2esdi.h>
-#include <linux/blkdev.h>
-#include <linux/mca-legacy.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/hdreg.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <asm/mca_dma.h>
-#include <asm/uaccess.h>
-
-#define PS2ESDI_IRQ 14
-#define MAX_HD 2
-#define MAX_RETRIES 5
-#define MAX_16BIT 65536
-#define ESDI_TIMEOUT 0xf000
-#define ESDI_STAT_TIMEOUT 4
-
-#define TYPE_0_CMD_BLK_LENGTH 2
-#define TYPE_1_CMD_BLK_LENGTH 4
-
-static void reset_ctrl(void);
-
-static int ps2esdi_geninit(void);
-
-static void do_ps2esdi_request(struct request_queue * q);
-
-static void ps2esdi_readwrite(int cmd, struct request *req);
-
-static void ps2esdi_fill_cmd_block(u_short * cmd_blk, u_short cmd,
-u_short cyl, u_short head, u_short sector, u_short length, u_char drive);
-
-static int ps2esdi_out_cmd_blk(u_short * cmd_blk);
-
-static void ps2esdi_prep_dma(char *buffer, u_short length, u_char dma_xmode);
-
-static irqreturn_t ps2esdi_interrupt_handler(int irq, void *dev_id);
-static void (*current_int_handler) (u_int) = NULL;
-static void ps2esdi_normal_interrupt_handler(u_int);
-static void ps2esdi_initial_reset_int_handler(u_int);
-static void ps2esdi_geometry_int_handler(u_int);
-static int ps2esdi_getgeo(struct block_device *bdev, struct hd_geometry *geo);
-
-static int ps2esdi_read_status_words(int num_words, int max_words, u_short * buffer);
-
-static void dump_cmd_complete_status(u_int int_ret_code);
-
-static void ps2esdi_get_device_cfg(void);
-
-static void ps2esdi_reset_timer(unsigned long unused);
-
-static u_int dma_arb_level; /* DMA arbitration level */
-
-static DECLARE_WAIT_QUEUE_HEAD(ps2esdi_int);
-
-static int no_int_yet;
-static int ps2esdi_drives;
-static u_short io_base;
-static DEFINE_TIMER(esdi_timer, ps2esdi_reset_timer, 0, 0);
-static int reset_status;
-static int ps2esdi_slot = -1;
-static int tp720esdi = 0; /* Is it Integrated ESDI of ThinkPad-720? */
-static int intg_esdi = 0; /* If integrated adapter */
-struct ps2esdi_i_struct {
- unsigned int head, sect, cyl, wpcom, lzone, ctl;
-};
-static DEFINE_SPINLOCK(ps2esdi_lock);
-static struct request_queue *ps2esdi_queue;
-static struct request *current_req;
-
-#if 0
-#if 0 /* try both - I don't know which one is better... UB */
-static struct ps2esdi_i_struct ps2esdi_info[MAX_HD] =
-{
- {4, 48, 1553, 0, 0, 0},
- {0, 0, 0, 0, 0, 0}};
-#else
-static struct ps2esdi_i_struct ps2esdi_info[MAX_HD] =
-{
- {64, 32, 161, 0, 0, 0},
- {0, 0, 0, 0, 0, 0}};
-#endif
-#endif
-static struct ps2esdi_i_struct ps2esdi_info[MAX_HD] =
-{
- {0, 0, 0, 0, 0, 0},
- {0, 0, 0, 0, 0, 0}};
-
-static struct block_device_operations ps2esdi_fops =
-{
- .owner = THIS_MODULE,
- .getgeo = ps2esdi_getgeo,
-};
-
-static struct gendisk *ps2esdi_gendisk[2];
-
-/* initialization routine called by ll_rw_blk.c */
-static int __init ps2esdi_init(void)
-{
-
- int error = 0;
-
- /* register the device - pass the name and major number */
- if (register_blkdev(PS2ESDI_MAJOR, "ed"))
- return -EBUSY;
-
- /* set up some global information - indicating device specific info */
- ps2esdi_queue = blk_init_queue(do_ps2esdi_request, &ps2esdi_lock);
- if (!ps2esdi_queue) {
- unregister_blkdev(PS2ESDI_MAJOR, "ed");
- return -ENOMEM;
- }
-
- /* some minor housekeeping - setup the global gendisk structure */
- error = ps2esdi_geninit();
- if (error) {
- printk(KERN_WARNING "PS2ESDI: error initialising"
- " device, releasing resources\n");
- unregister_blkdev(PS2ESDI_MAJOR, "ed");
- blk_cleanup_queue(ps2esdi_queue);
- return error;
- }
- return 0;
-} /* ps2esdi_init */
-
-#ifndef MODULE
-
-module_init(ps2esdi_init);
-
-#else
-
-static int cyl[MAX_HD] = {-1,-1};
-static int head[MAX_HD] = {-1, -1};
-static int sect[MAX_HD] = {-1, -1};
-
-module_param(tp720esdi, bool, 0);
-module_param_array(cyl, int, NULL, 0);
-module_param_array(head, int, NULL, 0);
-module_param_array(sect, int, NULL, 0);
-MODULE_LICENSE("GPL");
-
-int init_module(void) {
- int drive;
-
- for(drive = 0; drive < MAX_HD; drive++) {
- struct ps2esdi_i_struct *info = &ps2esdi_info[drive];
-
- if (cyl[drive] != -1) {
- info->cyl = info->lzone = cyl[drive];
- info->wpcom = 0;
- }
- if (head[drive] != -1) {
- info->head = head[drive];
- info->ctl = (head[drive] > 8 ? 8 : 0);
- }
- if (sect[drive] != -1) info->sect = sect[drive];
- }
- return ps2esdi_init();
-}
-
-void
-cleanup_module(void) {
- int i;
- if(ps2esdi_slot) {
- mca_mark_as_unused(ps2esdi_slot);
- mca_set_adapter_procfn(ps2esdi_slot, NULL, NULL);
- }
- release_region(io_base, 4);
- free_dma(dma_arb_level);
- free_irq(PS2ESDI_IRQ, &ps2esdi_gendisk);
- unregister_blkdev(PS2ESDI_MAJOR, "ed");
- blk_cleanup_queue(ps2esdi_queue);
- for (i = 0; i < ps2esdi_drives; i++) {
- del_gendisk(ps2esdi_gendisk[i]);
- put_disk(ps2esdi_gendisk[i]);
- }
-}
-#endif /* MODULE */
-
-/* handles boot time command line parameters */
-void __init tp720_setup(char *str, int *ints)
-{
- /* no params, just sets the tp720esdi flag if it exists */
-
- printk("%s: TP 720 ESDI flag set\n", DEVICE_NAME);
- tp720esdi = 1;
-}
-
-void __init ed_setup(char *str, int *ints)
-{
- int hdind = 0;
-
- /* handles 3 parameters only - corresponding to
- 1. Number of cylinders
- 2. Number of heads
- 3. Sectors/track
- */
-
- if (ints[0] != 3)
- return;
-
- /* print out the information - seen at boot time */
- printk("%s: ints[0]=%d ints[1]=%d ints[2]=%d ints[3]=%d\n",
- DEVICE_NAME, ints[0], ints[1], ints[2], ints[3]);
-
- /* set the index into device specific information table */
- if (ps2esdi_info[0].head != 0)
- hdind = 1;
-
- /* set up all the device information */
- ps2esdi_info[hdind].head = ints[2];
- ps2esdi_info[hdind].sect = ints[3];
- ps2esdi_info[hdind].cyl = ints[1];
- ps2esdi_info[hdind].wpcom = 0;
- ps2esdi_info[hdind].lzone = ints[1];
- ps2esdi_info[hdind].ctl = (ints[2] > 8 ? 8 : 0);
-#if 0 /* this may be needed for PS2/Mod.80, but it hurts ThinkPad! */
- ps2esdi_drives = hdind + 1; /* increment index for the next time */
-#endif
-} /* ed_setup */
-
-static int ps2esdi_getinfo(char *buf, int slot, void *d)
-{
- int len = 0;
-
- len += sprintf(buf + len, "DMA Arbitration Level: %d\n",
- dma_arb_level);
- len += sprintf(buf + len, "IO Port: %x\n", io_base);
- len += sprintf(buf + len, "IRQ: 14\n");
- len += sprintf(buf + len, "Drives: %d\n", ps2esdi_drives);
-
- return len;
-}
-
-/* ps2 esdi specific initialization - called thru the gendisk chain */
-static int __init ps2esdi_geninit(void)
-{
- /*
- The first part contains the initialization code
- for the ESDI disk subsystem. All we really do
- is search for the POS registers of the controller
- to do some simple setup operations. First, we
- must ensure that the controller is installed,
- enabled, and configured as PRIMARY. Then we must
- determine the DMA arbitration level being used by
- the controller so we can handle data transfer
- operations properly. If all of this works, then
- we will set the INIT_FLAG to a non-zero value.
- */
-
- int slot = 0, i, reset_start, reset_end;
- u_char status;
- unsigned short adapterID;
- int error = 0;
-
- if ((slot = mca_find_adapter(INTG_ESDI_ID, 0)) != MCA_NOTFOUND) {
- adapterID = INTG_ESDI_ID;
- printk("%s: integrated ESDI adapter found in slot %d\n",
- DEVICE_NAME, slot+1);
-#ifndef MODULE
- mca_set_adapter_name(slot, "PS/2 Integrated ESDI");
-#endif
- } else if ((slot = mca_find_adapter(NRML_ESDI_ID, 0)) != -1) {
- adapterID = NRML_ESDI_ID;
- printk("%s: normal ESDI adapter found in slot %d\n",
- DEVICE_NAME, slot+1);
- mca_set_adapter_name(slot, "PS/2 ESDI");
- } else {
- return -ENODEV;
- }
-
- ps2esdi_slot = slot;
- mca_mark_as_used(slot);
- mca_set_adapter_procfn(slot, (MCA_ProcFn) ps2esdi_getinfo, NULL);
-
- /* Found the slot - read the POS register 2 to get the necessary
- configuration and status information. POS register 2 has the
- following information :
- Bit Function
- 7 reserved = 0
- 6 arbitration method
- 0 - fairness enabled
- 1 - fairness disabled, linear priority assignment
- 5-2 arbitration level
- 1 alternate address
- 1 alternate address
- 0 - use addresses 0x3510 - 0x3517
- 0 adapter enable
- */
-
- status = mca_read_stored_pos(slot, 2);
- /* is it enabled ? */
- if (!(status & STATUS_ENABLED)) {
- printk("%s: ESDI adapter disabled\n", DEVICE_NAME);
- error = -ENODEV;
- goto err_out1;
- }
- /* try to grab IRQ, and try to grab a slow IRQ if it fails, so we can
- share with the SCSI driver */
- if (request_irq(PS2ESDI_IRQ, ps2esdi_interrupt_handler,
- IRQF_DISABLED | IRQF_SHARED, "PS/2 ESDI", &ps2esdi_gendisk)
- && request_irq(PS2ESDI_IRQ, ps2esdi_interrupt_handler,
- IRQF_SHARED, "PS/2 ESDI", &ps2esdi_gendisk)
- ) {
- printk("%s: Unable to get IRQ %d\n", DEVICE_NAME, PS2ESDI_IRQ);
- error = -EBUSY;
- goto err_out1;
- }
- if (status & STATUS_ALTERNATE)
- io_base = ALT_IO_BASE;
- else
- io_base = PRIMARY_IO_BASE;
-
- if (!request_region(io_base, 4, "ed")) {
- printk(KERN_WARNING"Unable to request region 0x%x\n", io_base);
- error = -EBUSY;
- goto err_out2;
- }
- /* get the dma arbitration level */
- dma_arb_level = (status >> 2) & 0xf;
-
- /* BA */
- printk("%s: DMA arbitration level : %d\n",
- DEVICE_NAME, dma_arb_level);
-
- LITE_ON;
- current_int_handler = ps2esdi_initial_reset_int_handler;
- reset_ctrl();
- reset_status = 0;
- reset_start = jiffies;
- while (!reset_status) {
- init_timer(&esdi_timer);
- esdi_timer.expires = jiffies + HZ;
- esdi_timer.data = 0;
- add_timer(&esdi_timer);
- sleep_on(&ps2esdi_int);
- }
- reset_end = jiffies;
- LITE_OFF;
- printk("%s: reset interrupt after %d jiffies, %u.%02u secs\n",
- DEVICE_NAME, reset_end - reset_start, (reset_end - reset_start) / HZ,
- (reset_end - reset_start) % HZ);
-
-
- /* Integrated ESDI Disk and Controller has only one drive! */
- if (adapterID == INTG_ESDI_ID) {/* if not "normal" PS2 ESDI adapter */
- ps2esdi_drives = 1; /* then we have only one physical disk! */ intg_esdi = 1;
- }
-
-
-
- /* finally this part sets up some global data structures etc. */
-
- ps2esdi_get_device_cfg();
-
- /* some annoyance in the above routine returns TWO drives?
- Is something else happining in the background?
- Regaurdless we fix the # of drives again. AJK */
- /* Integrated ESDI Disk and Controller has only one drive! */
- if (adapterID == INTG_ESDI_ID) /* if not "normal" PS2 ESDI adapter */
- ps2esdi_drives = 1; /* Not three or two, ONE DAMNIT! */
-
- current_int_handler = ps2esdi_normal_interrupt_handler;
-
- if (request_dma(dma_arb_level, "ed") !=0) {
- printk(KERN_WARNING "PS2ESDI: Can't request dma-channel %d\n"
- ,(int) dma_arb_level);
- error = -EBUSY;
- goto err_out3;
- }
- blk_queue_max_sectors(ps2esdi_queue, 128);
-
- error = -ENOMEM;
- for (i = 0; i < ps2esdi_drives; i++) {
- struct gendisk *disk = alloc_disk(64);
- if (!disk)
- goto err_out4;
- disk->major = PS2ESDI_MAJOR;
- disk->first_minor = i<<6;
- sprintf(disk->disk_name, "ed%c", 'a'+i);
- disk->fops = &ps2esdi_fops;
- ps2esdi_gendisk[i] = disk;
- }
-
- for (i = 0; i < ps2esdi_drives; i++) {
- struct gendisk *disk = ps2esdi_gendisk[i];
- set_capacity(disk, ps2esdi_info[i].head * ps2esdi_info[i].sect *
- ps2esdi_info[i].cyl);
- disk->queue = ps2esdi_queue;
- disk->private_data = &ps2esdi_info[i];
- add_disk(disk);
- }
- return 0;
-err_out4:
- while (i--)
- put_disk(ps2esdi_gendisk[i]);
-err_out3:
- release_region(io_base, 4);
-err_out2:
- free_irq(PS2ESDI_IRQ, &ps2esdi_gendisk);
-err_out1:
- if(ps2esdi_slot) {
- mca_mark_as_unused(ps2esdi_slot);
- mca_set_adapter_procfn(ps2esdi_slot, NULL, NULL);
- }
- return error;
-}
-
-static void __init ps2esdi_get_device_cfg(void)
-{
- u_short cmd_blk[TYPE_0_CMD_BLK_LENGTH];
-
- /*BA */ printk("%s: Drive 0\n", DEVICE_NAME);
- current_int_handler = ps2esdi_geometry_int_handler;
- cmd_blk[0] = CMD_GET_DEV_CONFIG | 0x600;
- cmd_blk[1] = 0;
- no_int_yet = TRUE;
- ps2esdi_out_cmd_blk(cmd_blk);
- if (no_int_yet)
- sleep_on(&ps2esdi_int);
-
- if (ps2esdi_drives > 1) {
- printk("%s: Drive 1\n", DEVICE_NAME); /*BA */
- cmd_blk[0] = CMD_GET_DEV_CONFIG | (1 << 5) | 0x600;
- cmd_blk[1] = 0;
- no_int_yet = TRUE;
- ps2esdi_out_cmd_blk(cmd_blk);
- if (no_int_yet)
- sleep_on(&ps2esdi_int);
- } /* if second physical drive is present */
- return;
-}
-
-/* strategy routine that handles most of the IO requests */
-static void do_ps2esdi_request(struct request_queue * q)
-{
- struct request *req;
- /* since, this routine is called with interrupts cleared - they
- must be before it finishes */
-
- req = elv_next_request(q);
- if (!req)
- return;
-
-#if 0
- printk("%s:got request. device : %s command : %d sector : %ld count : %ld, buffer: %p\n",
- DEVICE_NAME,
- req->rq_disk->disk_name,
- req->cmd, req->sector,
- req->current_nr_sectors, req->buffer);
-#endif
-
- /* check for above 16Mb dmas */
- if (isa_virt_to_bus(req->buffer + req->current_nr_sectors * 512) > 16 * MB) {
- printk("%s: DMA above 16MB not supported\n", DEVICE_NAME);
- end_request(req, FAIL);
- return;
- }
-
- if (req->sector+req->current_nr_sectors > get_capacity(req->rq_disk)) {
- printk("Grrr. error. ps2esdi_drives: %d, %llu %llu\n",
- ps2esdi_drives, req->sector,
- (unsigned long long)get_capacity(req->rq_disk));
- end_request(req, FAIL);
- return;
- }
-
- switch (rq_data_dir(req)) {
- case READ:
- ps2esdi_readwrite(READ, req);
- break;
- case WRITE:
- ps2esdi_readwrite(WRITE, req);
- break;
- default:
- printk("%s: Unknown command\n", req->rq_disk->disk_name);
- end_request(req, FAIL);
- break;
- } /* handle different commands */
-} /* main strategy routine */
-
-/* resets the ESDI adapter */
-static void reset_ctrl(void)
-{
-
- u_long expire;
- u_short status;
-
- /* enable interrupts on the controller */
- status = inb(ESDI_INTRPT);
- outb((status & 0xe0) | ATT_EOI, ESDI_ATTN); /* to be sure we don't have
- any interrupt pending... */
- outb_p(CTRL_ENABLE_INTR, ESDI_CONTROL);
-
- /* read the ESDI status port - if the controller is not busy,
- simply do a soft reset (fast) - otherwise we'll have to do a
- hard (slow) reset. */
- if (!(inb_p(ESDI_STATUS) & STATUS_BUSY)) {
- /*BA */ printk("%s: soft reset...\n", DEVICE_NAME);
- outb_p(CTRL_SOFT_RESET, ESDI_ATTN);
- }
- /* soft reset */
- else {
- /*BA */
- printk("%s: hard reset...\n", DEVICE_NAME);
- outb_p(CTRL_HARD_RESET, ESDI_CONTROL);
- expire = jiffies + 2*HZ;
- while (time_before(jiffies, expire));
- outb_p(1, ESDI_CONTROL);
- } /* hard reset */
-
-
-} /* reset the controller */
-
-/* called by the strategy routine to handle read and write requests */
-static void ps2esdi_readwrite(int cmd, struct request *req)
-{
- struct ps2esdi_i_struct *p = req->rq_disk->private_data;
- unsigned block = req->sector;
- unsigned count = req->current_nr_sectors;
- int drive = p - ps2esdi_info;
- u_short track, head, cylinder, sector;
- u_short cmd_blk[TYPE_1_CMD_BLK_LENGTH];
-
- /* do some relevant arithmatic */
- track = block / p->sect;
- head = track % p->head;
- cylinder = track / p->head;
- sector = block % p->sect;
-
-#if 0
- printk("%s: cyl=%d head=%d sect=%d\n", DEVICE_NAME, cylinder, head, sector);
-#endif
- /* call the routine that actually fills out a command block */
- ps2esdi_fill_cmd_block
- (cmd_blk,
- (cmd == READ) ? CMD_READ : CMD_WRITE,
- cylinder, head, sector, count, drive);
-
- /* send the command block to the controller */
- current_req = req;
- spin_unlock_irq(&ps2esdi_lock);
- if (ps2esdi_out_cmd_blk(cmd_blk)) {
- spin_lock_irq(&ps2esdi_lock);
- printk("%s: Controller failed\n", DEVICE_NAME);
- if ((++req->errors) >= MAX_RETRIES)
- end_request(req, FAIL);
- }
- /* check for failure to put out the command block */
- else {
- spin_lock_irq(&ps2esdi_lock);
-#if 0
- printk("%s: waiting for xfer\n", DEVICE_NAME);
-#endif
- /* turn disk lights on */
- LITE_ON;
- }
-
-} /* ps2esdi_readwrite */
-
-/* fill out the command block */
-static void ps2esdi_fill_cmd_block(u_short * cmd_blk, u_short cmd,
- u_short cyl, u_short head, u_short sector, u_short length, u_char drive)
-{
-
- cmd_blk[0] = (drive << 5) | cmd;
- cmd_blk[1] = length;
- cmd_blk[2] = ((cyl & 0x1f) << 11) | (head << 5) | sector;
- cmd_blk[3] = (cyl & 0x3E0) >> 5;
-
-} /* fill out the command block */
-
-/* write a command block to the controller */
-static int ps2esdi_out_cmd_blk(u_short * cmd_blk)
-{
-
- int i;
- unsigned long jif;
- u_char status;
-
- /* enable interrupts */
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
-
- /* do not write to the controller, if it is busy */
- for (jif = jiffies + ESDI_STAT_TIMEOUT;
- time_after(jif, jiffies) &&
- (inb(ESDI_STATUS) & STATUS_BUSY); )
- ;
-
-#if 0
- printk("%s: i(1)=%ld\n", DEVICE_NAME, jif);
-#endif
-
- /* if device is still busy - then just time out */
- if (inb(ESDI_STATUS) & STATUS_BUSY) {
- printk("%s: ps2esdi_out_cmd timed out (1)\n", DEVICE_NAME);
- return ERROR;
- } /* timeout ??? */
- /* Set up the attention register in the controller */
- outb(((*cmd_blk) & 0xE0) | 1, ESDI_ATTN);
-
-#if 0
- printk("%s: sending %d words to controller\n", DEVICE_NAME, (((*cmd_blk) >> 14) + 1) << 1);
-#endif
-
- /* one by one send each word out */
- for (i = (((*cmd_blk) >> 14) + 1) << 1; i; i--) {
- status = inb(ESDI_STATUS);
- for (jif = jiffies + ESDI_STAT_TIMEOUT;
- time_after(jif, jiffies) && (status & STATUS_BUSY) &&
- (status & STATUS_CMD_INF); status = inb(ESDI_STATUS));
- if ((status & (STATUS_BUSY | STATUS_CMD_INF)) == STATUS_BUSY) {
-#if 0
- printk("%s: sending %04X\n", DEVICE_NAME, *cmd_blk);
-#endif
- outw(*cmd_blk++, ESDI_CMD_INT);
- } else {
- printk("%s: ps2esdi_out_cmd timed out while sending command (status=%02X)\n",
- DEVICE_NAME, status);
- return ERROR;
- }
- } /* send all words out */
- return OK;
-} /* send out the commands */
-
-
-/* prepare for dma - do all the necessary setup */
-static void ps2esdi_prep_dma(char *buffer, u_short length, u_char dma_xmode)
-{
- unsigned long flags = claim_dma_lock();
-
- mca_disable_dma(dma_arb_level);
-
- mca_set_dma_addr(dma_arb_level, isa_virt_to_bus(buffer));
-
- mca_set_dma_count(dma_arb_level, length * 512 / 2);
-
- mca_set_dma_mode(dma_arb_level, dma_xmode);
-
- mca_enable_dma(dma_arb_level);
-
- release_dma_lock(flags);
-
-} /* prepare for dma */
-
-
-
-static irqreturn_t ps2esdi_interrupt_handler(int irq, void *dev_id)
-{
- u_int int_ret_code;
-
- if (inb(ESDI_STATUS) & STATUS_INTR) {
- int_ret_code = inb(ESDI_INTRPT);
- if (current_int_handler) {
- /* Disable adapter interrupts till processing is finished */
- outb(CTRL_DISABLE_INTR, ESDI_CONTROL);
- current_int_handler(int_ret_code);
- } else
- printk("%s: help ! No interrupt handler.\n", DEVICE_NAME);
- } else {
- return IRQ_NONE;
- }
- return IRQ_HANDLED;
-}
-
-static void ps2esdi_initial_reset_int_handler(u_int int_ret_code)
-{
-
- switch (int_ret_code & 0xf) {
- case INT_RESET:
- /*BA */
- printk("%s: initial reset completed.\n", DEVICE_NAME);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- wake_up(&ps2esdi_int);
- break;
- case INT_ATTN_ERROR:
- printk("%s: Attention error. interrupt status : %02X\n", DEVICE_NAME,
- int_ret_code);
- printk("%s: status: %02x\n", DEVICE_NAME, inb(ESDI_STATUS));
- break;
- default:
- printk("%s: initial reset handler received interrupt: %02X\n",
- DEVICE_NAME, int_ret_code);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- break;
- }
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
-}
-
-
-static void ps2esdi_geometry_int_handler(u_int int_ret_code)
-{
- u_int status, drive_num;
- unsigned long rba;
- int i;
-
- drive_num = int_ret_code >> 5;
- switch (int_ret_code & 0xf) {
- case INT_CMD_COMPLETE:
- for (i = ESDI_TIMEOUT; i && !(inb(ESDI_STATUS) & STATUS_STAT_AVAIL); i--);
- if (!(inb(ESDI_STATUS) & STATUS_STAT_AVAIL)) {
- printk("%s: timeout reading status word\n", DEVICE_NAME);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- break;
- }
- status = inw(ESDI_STT_INT);
- if ((status & 0x1F) == CMD_GET_DEV_CONFIG) {
-#define REPLY_WORDS 5 /* we already read word 0 */
- u_short reply[REPLY_WORDS];
-
- if (ps2esdi_read_status_words((status >> 8) - 1, REPLY_WORDS, reply)) {
- /*BA */
- printk("%s: Device Configuration Status for drive %u\n",
- DEVICE_NAME, drive_num);
-
- printk("%s: Spares/cyls: %u", DEVICE_NAME, reply[0] >> 8);
-
- printk
- ("Config bits: %s%s%s%s%s\n",
- (reply[0] & CONFIG_IS) ? "Invalid Secondary, " : "",
- ((reply[0] & CONFIG_ZD) && !(reply[0] & CONFIG_IS))
- ? "Zero Defect, " : "Defects Present, ",
- (reply[0] & CONFIG_SF) ? "Skewed Format, " : "",
- (reply[0] & CONFIG_FR) ? "Removable, " : "Non-Removable, ",
- (reply[0] & CONFIG_RT) ? "No Retries" : "Retries");
-
- rba = reply[1] | ((unsigned long) reply[2] << 16);
- printk("%s: Number of RBA's: %lu\n", DEVICE_NAME, rba);
-
- printk("%s: Physical number of cylinders: %u, Sectors/Track: %u, Heads: %u\n",
- DEVICE_NAME, reply[3], reply[4] >> 8, reply[4] & 0xff);
-
- if (!ps2esdi_info[drive_num].head) {
- ps2esdi_info[drive_num].head = 64;
- ps2esdi_info[drive_num].sect = 32;
- ps2esdi_info[drive_num].cyl = rba / (64 * 32);
- ps2esdi_info[drive_num].wpcom = 0;
- ps2esdi_info[drive_num].lzone = ps2esdi_info[drive_num].cyl;
- ps2esdi_info[drive_num].ctl = 8;
- if (tp720esdi) { /* store the retrieved parameters */
- ps2esdi_info[0].head = reply[4] & 0Xff;
- ps2esdi_info[0].sect = reply[4] >> 8;
- ps2esdi_info[0].cyl = reply[3];
- ps2esdi_info[0].wpcom = 0;
- ps2esdi_info[0].lzone = reply[3];
- } else {
- if (!intg_esdi)
- ps2esdi_drives++;
- }
- }
-#ifdef OBSOLETE
- if (!ps2esdi_info[drive_num].head) {
- ps2esdi_info[drive_num].head = reply[4] & 0Xff;
- ps2esdi_info[drive_num].sect = reply[4] >> 8;
- ps2esdi_info[drive_num].cyl = reply[3];
- ps2esdi_info[drive_num].wpcom = 0;
- ps2esdi_info[drive_num].lzone = reply[3];
- if (tp720esdi) { /* store the retrieved parameters */
- ps2esdi_info[0].head = reply[4] & 0Xff;
- ps2esdi_info[0].sect = reply[4] >> 8;
- ps2esdi_info[0].cyl = reply[3];
- ps2esdi_info[0].wpcom = 0;
- ps2esdi_info[0].lzone = reply[3];
- } else {
- ps2esdi_drives++;
- }
- }
-#endif
-
- } else
- printk("%s: failed while getting device config\n", DEVICE_NAME);
-#undef REPLY_WORDS
- } else
- printk("%s: command %02X unknown by geometry handler\n",
- DEVICE_NAME, status & 0x1f);
-
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- break;
-
- case INT_ATTN_ERROR:
- printk("%s: Attention error. interrupt status : %02X\n", DEVICE_NAME,
- int_ret_code);
- printk("%s: Device not available\n", DEVICE_NAME);
- break;
- case INT_CMD_ECC:
- case INT_CMD_RETRY:
- case INT_CMD_ECC_RETRY:
- case INT_CMD_WARNING:
- case INT_CMD_ABORT:
- case INT_CMD_FAILED:
- case INT_DMA_ERR:
- case INT_CMD_BLK_ERR:
- /*BA */ printk("%s: Whaa. Error occurred...\n", DEVICE_NAME);
- dump_cmd_complete_status(int_ret_code);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- break;
- default:
- printk("%s: Unknown interrupt reason: %02X\n",
- DEVICE_NAME, int_ret_code & 0xf);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- break;
- }
-
- wake_up(&ps2esdi_int);
- no_int_yet = FALSE;
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
-
-}
-
-static void ps2esdi_normal_interrupt_handler(u_int int_ret_code)
-{
- unsigned long flags;
- u_int status;
- u_int ending;
- int i;
-
- switch (int_ret_code & 0x0f) {
- case INT_TRANSFER_REQ:
- ps2esdi_prep_dma(current_req->buffer,
- current_req->current_nr_sectors,
- (rq_data_dir(current_req) == READ)
- ? MCA_DMA_MODE_16 | MCA_DMA_MODE_WRITE | MCA_DMA_MODE_XFER
- : MCA_DMA_MODE_16 | MCA_DMA_MODE_READ);
- outb(CTRL_ENABLE_DMA | CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = -1;
- break;
-
- case INT_ATTN_ERROR:
- printk("%s: Attention error. interrupt status : %02X\n", DEVICE_NAME,
- int_ret_code);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = FAIL;
- break;
-
- case INT_CMD_COMPLETE:
- for (i = ESDI_TIMEOUT; i && !(inb(ESDI_STATUS) & STATUS_STAT_AVAIL); i--);
- if (!(inb(ESDI_STATUS) & STATUS_STAT_AVAIL)) {
- printk("%s: timeout reading status word\n", DEVICE_NAME);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- if ((++current_req->errors) >= MAX_RETRIES)
- ending = FAIL;
- else
- ending = -1;
- break;
- }
- status = inw(ESDI_STT_INT);
- switch (status & 0x1F) {
- case (CMD_READ & 0xff):
- case (CMD_WRITE & 0xff):
- LITE_OFF;
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = SUCCES;
- break;
- default:
- printk("%s: interrupt for unknown command %02X\n",
- DEVICE_NAME, status & 0x1f);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = -1;
- break;
- }
- break;
- case INT_CMD_ECC:
- case INT_CMD_RETRY:
- case INT_CMD_ECC_RETRY:
- LITE_OFF;
- dump_cmd_complete_status(int_ret_code);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = SUCCES;
- break;
- case INT_CMD_WARNING:
- case INT_CMD_ABORT:
- case INT_CMD_FAILED:
- case INT_DMA_ERR:
- LITE_OFF;
- dump_cmd_complete_status(int_ret_code);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- if ((++current_req->errors) >= MAX_RETRIES)
- ending = FAIL;
- else
- ending = -1;
- break;
-
- case INT_CMD_BLK_ERR:
- dump_cmd_complete_status(int_ret_code);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = FAIL;
- break;
-
- case INT_CMD_FORMAT:
- printk("%s: huh ? Who issued this format command ?\n"
- ,DEVICE_NAME);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = -1;
- break;
-
- case INT_RESET:
- /* BA printk("%s: reset completed.\n", DEVICE_NAME) */ ;
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = -1;
- break;
-
- default:
- printk("%s: Unknown interrupt reason: %02X\n",
- DEVICE_NAME, int_ret_code & 0xf);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = -1;
- break;
- }
- if(ending != -1) {
- spin_lock_irqsave(&ps2esdi_lock, flags);
- end_request(current_req, ending);
- current_req = NULL;
- do_ps2esdi_request(ps2esdi_queue);
- spin_unlock_irqrestore(&ps2esdi_lock, flags);
- }
-} /* handle interrupts */
-
-
-
-static int ps2esdi_read_status_words(int num_words,
- int max_words,
- u_short * buffer)
-{
- int i;
-
- for (; max_words && num_words; max_words--, num_words--, buffer++) {
- for (i = ESDI_TIMEOUT; i && !(inb(ESDI_STATUS) & STATUS_STAT_AVAIL); i--);
- if (!(inb(ESDI_STATUS) & STATUS_STAT_AVAIL)) {
- printk("%s: timeout reading status word\n", DEVICE_NAME);
- return FAIL;
- }
- *buffer = inw(ESDI_STT_INT);
- }
- return SUCCES;
-}
-
-
-
-
-static void dump_cmd_complete_status(u_int int_ret_code)
-{
-#define WAIT_FOR_STATUS \
- for(i=ESDI_TIMEOUT;i && !(inb(ESDI_STATUS) & STATUS_STAT_AVAIL);i--); \
- if(!(inb(ESDI_STATUS) & STATUS_STAT_AVAIL)) { \
- printk("%s: timeout reading status word\n",DEVICE_NAME); \
- return; \
- }
-
- int i, word_count;
- u_short stat_word;
- u_long rba;
-
- printk("%s: Device: %u, interrupt ID: %02X\n",
- DEVICE_NAME, int_ret_code >> 5,
- int_ret_code & 0xf);
-
- WAIT_FOR_STATUS;
- stat_word = inw(ESDI_STT_INT);
- word_count = (stat_word >> 8) - 1;
- printk("%s: %u status words, command: %02X\n", DEVICE_NAME, word_count,
- stat_word & 0xff);
-
- if (word_count--) {
- WAIT_FOR_STATUS;
- stat_word = inw(ESDI_STT_INT);
- printk("%s: command status code: %02X, command error code: %02X\n",
- DEVICE_NAME, stat_word >> 8, stat_word & 0xff);
- }
- if (word_count--) {
- WAIT_FOR_STATUS;
- stat_word = inw(ESDI_STT_INT);
- printk("%s: device error code: %s%s%s%s%s,%02X\n", DEVICE_NAME,
- (stat_word & 0x1000) ? "Ready, " : "Not Ready, ",
- (stat_word & 0x0800) ? "Selected, " : "Not Selected, ",
- (stat_word & 0x0400) ? "Write Fault, " : "",
- (stat_word & 0x0200) ? "Track 0, " : "",
- (stat_word & 0x0100) ? "Seek or command complete, " : "",
- stat_word >> 8);
- }
- if (word_count--) {
- WAIT_FOR_STATUS;
- stat_word = inw(ESDI_STT_INT);
- printk("%s: Blocks to do: %u", DEVICE_NAME, stat_word);
- }
- if (word_count -= 2) {
- WAIT_FOR_STATUS;
- rba = inw(ESDI_STT_INT);
- WAIT_FOR_STATUS;
- rba |= inw(ESDI_STT_INT) << 16;
- printk(", Last Cyl: %u Head: %u Sector: %u\n",
- (u_short) ((rba & 0x1ff80000) >> 11),
- (u_short) ((rba & 0x7E0) >> 5), (u_short) (rba & 0x1f));
- } else
- printk("\n");
-
- if (word_count--) {
- WAIT_FOR_STATUS;
- stat_word = inw(ESDI_STT_INT);
- printk("%s: Blocks required ECC: %u", DEVICE_NAME, stat_word);
- }
- printk("\n");
-
-#undef WAIT_FOR_STATUS
-
-}
-
-static int ps2esdi_getgeo(struct block_device *bdev, struct hd_geometry *geo)
-{
- struct ps2esdi_i_struct *p = bdev->bd_disk->private_data;
-
- geo->heads = p->head;
- geo->sectors = p->sect;
- geo->cylinders = p->cyl;
- return 0;
-}
-
-static void ps2esdi_reset_timer(unsigned long unused)
-{
-
- int status;
-
- status = inb(ESDI_INTRPT);
- if ((status & 0xf) == INT_RESET) {
- outb((status & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- reset_status = 1;
- }
- wake_up(&ps2esdi_int);
-}
diff --git a/drivers/block/sx8.c b/drivers/block/sx8.c
index cd5674b63faf..a18e1ca0f761 100644
--- a/drivers/block/sx8.c
+++ b/drivers/block/sx8.c
@@ -79,9 +79,9 @@ MODULE_PARM_DESC(max_queue, "Maximum number of queued commands. (min==1, max==30
/* note: prints function name for you */
#ifdef CARM_DEBUG
-#define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
#ifdef CARM_VERBOSE_DEBUG
-#define VPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define VPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
#else
#define VPRINTK(fmt, args...)
#endif /* CARM_VERBOSE_DEBUG */
@@ -96,7 +96,7 @@ MODULE_PARM_DESC(max_queue, "Maximum number of queued commands. (min==1, max==30
#define assert(expr) \
if(unlikely(!(expr))) { \
printk(KERN_ERR "Assertion failed! %s,%s,%s,line=%d\n", \
- #expr,__FILE__,__FUNCTION__,__LINE__); \
+ #expr, __FILE__, __func__, __LINE__); \
}
#endif
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index c452e2d355ee..27bfe72aab59 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -8,6 +8,7 @@
* and is not licensed separately. See file COPYING for details.
*
* TODO (sorted by decreasing priority)
+ * -- Return sense now that rq allows it (we always auto-sense anyway).
* -- set readonly flag for CDs, set removable flag for CF readers
* -- do inquiry and verify we got a disk and not a tape (for LUN mismatch)
* -- verify the 13 conditions and do bulk resets
@@ -359,7 +360,8 @@ static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
struct ub_scsi_cmd *cmd, struct ub_request *urq);
static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
-static void ub_end_rq(struct request *rq, unsigned int status);
+static void ub_end_rq(struct request *rq, unsigned int status,
+ unsigned int cmd_len);
static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun,
struct ub_request *urq, struct ub_scsi_cmd *cmd);
static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
@@ -642,13 +644,13 @@ static int ub_request_fn_1(struct ub_lun *lun, struct request *rq)
if (atomic_read(&sc->poison)) {
blkdev_dequeue_request(rq);
- ub_end_rq(rq, DID_NO_CONNECT << 16);
+ ub_end_rq(rq, DID_NO_CONNECT << 16, blk_rq_bytes(rq));
return 0;
}
if (lun->changed && !blk_pc_request(rq)) {
blkdev_dequeue_request(rq);
- ub_end_rq(rq, SAM_STAT_CHECK_CONDITION);
+ ub_end_rq(rq, SAM_STAT_CHECK_CONDITION, blk_rq_bytes(rq));
return 0;
}
@@ -701,7 +703,7 @@ static int ub_request_fn_1(struct ub_lun *lun, struct request *rq)
drop:
ub_put_cmd(lun, cmd);
- ub_end_rq(rq, DID_ERROR << 16);
+ ub_end_rq(rq, DID_ERROR << 16, blk_rq_bytes(rq));
return 0;
}
@@ -770,6 +772,7 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
struct ub_request *urq = cmd->back;
struct request *rq;
unsigned int scsi_status;
+ unsigned int cmd_len;
rq = urq->rq;
@@ -779,8 +782,18 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
rq->data_len = 0;
else
rq->data_len -= cmd->act_len;
+ scsi_status = 0;
+ } else {
+ if (cmd->act_len != cmd->len) {
+ if ((cmd->key == MEDIUM_ERROR ||
+ cmd->key == UNIT_ATTENTION) &&
+ ub_rw_cmd_retry(sc, lun, urq, cmd) == 0)
+ return;
+ scsi_status = SAM_STAT_CHECK_CONDITION;
+ } else {
+ scsi_status = 0;
+ }
}
- scsi_status = 0;
} else {
if (blk_pc_request(rq)) {
/* UB_SENSE_SIZE is smaller than SCSI_SENSE_BUFFERSIZE */
@@ -801,14 +814,17 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
urq->rq = NULL;
+ cmd_len = cmd->len;
ub_put_cmd(lun, cmd);
- ub_end_rq(rq, scsi_status);
+ ub_end_rq(rq, scsi_status, cmd_len);
blk_start_queue(lun->disk->queue);
}
-static void ub_end_rq(struct request *rq, unsigned int scsi_status)
+static void ub_end_rq(struct request *rq, unsigned int scsi_status,
+ unsigned int cmd_len)
{
int error;
+ long rqlen;
if (scsi_status == 0) {
error = 0;
@@ -816,8 +832,12 @@ static void ub_end_rq(struct request *rq, unsigned int scsi_status)
error = -EIO;
rq->errors = scsi_status;
}
- if (__blk_end_request(rq, error, blk_rq_bytes(rq)))
- BUG();
+ rqlen = blk_rq_bytes(rq); /* Oddly enough, this is the residue. */
+ if (__blk_end_request(rq, error, cmd_len)) {
+ printk(KERN_WARNING DRV_NAME
+ ": __blk_end_request blew, %s-cmd total %u rqlen %ld\n",
+ blk_pc_request(rq)? "pc": "fs", cmd_len, rqlen);
+ }
}
static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun,
diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c
index 9e61fca46117..ebfe038d859e 100644
--- a/drivers/block/viodasd.c
+++ b/drivers/block/viodasd.c
@@ -69,7 +69,7 @@ MODULE_LICENSE("GPL");
enum {
PARTITION_SHIFT = 3,
MAX_DISKNO = HVMAXARCHITECTEDVIRTUALDISKS,
- MAX_DISK_NAME = sizeof(((struct gendisk *)0)->disk_name)
+ MAX_DISK_NAME = FIELD_SIZEOF(struct gendisk, disk_name)
};
static DEFINE_SPINLOCK(viodasd_spinlock);
@@ -528,8 +528,7 @@ static int block_event_to_scatterlist(const struct vioblocklpevent *bevent,
numsg = VIOMAXBLOCKDMA;
*total_len = 0;
- memset(sg, 0, sizeof(sg[0]) * VIOMAXBLOCKDMA);
-
+ sg_init_table(sg, VIOMAXBLOCKDMA);
for (i = 0; (i < numsg) && (rw_data->dma_info[i].len > 0); ++i) {
sg_dma_address(&sg[i]) = rw_data->dma_info[i].token;
sg_dma_len(&sg[i]) = rw_data->dma_info[i].len;
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 3b1a68d6eddb..0cfbe8c594a5 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -238,6 +238,7 @@ static int virtblk_probe(struct virtio_device *vdev)
vblk->disk->first_minor = index_to_minor(index);
vblk->disk->private_data = vblk;
vblk->disk->fops = &virtblk_fops;
+ vblk->disk->driverfs_dev = &vdev->dev;
index++;
/* If barriers are supported, tell block layer that queue is ordered */
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 8afce67c0aa5..9c6f3f99208d 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -37,6 +37,7 @@
#include <linux/interrupt.h>
#include <linux/blkdev.h>
+#include <linux/hdreg.h>
#include <linux/module.h>
#include <xen/xenbus.h>
@@ -135,6 +136,22 @@ static void blkif_restart_queue_callback(void *arg)
schedule_work(&info->work);
}
+int blkif_getgeo(struct block_device *bd, struct hd_geometry *hg)
+{
+ /* We don't have real geometry info, but let's at least return
+ values consistent with the size of the device */
+ sector_t nsect = get_capacity(bd->bd_disk);
+ sector_t cylinders = nsect;
+
+ hg->heads = 0xff;
+ hg->sectors = 0x3f;
+ sector_div(cylinders, hg->heads * hg->sectors);
+ hg->cylinders = cylinders;
+ if ((sector_t)(hg->cylinders + 1) * hg->heads * hg->sectors < nsect)
+ hg->cylinders = 0xffff;
+ return 0;
+}
+
/*
* blkif_queue_request
*
@@ -937,6 +954,7 @@ static struct block_device_operations xlvbd_block_fops =
.owner = THIS_MODULE,
.open = blkif_open,
.release = blkif_release,
+ .getgeo = blkif_getgeo,
};
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-09 18:09:25 +0300