2 files changed, 164 insertions, 100 deletions

diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index 52b2f2a71470..516026954be6 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -41,10 +41,31 @@
 #include "mtip32xx.h"
 
 #define HW_CMD_SLOT_SZ		(MTIP_MAX_COMMAND_SLOTS * 32)
-#define HW_CMD_TBL_SZ		(AHCI_CMD_TBL_HDR_SZ + (MTIP_MAX_SG * 16))
-#define HW_CMD_TBL_AR_SZ	(HW_CMD_TBL_SZ * MTIP_MAX_COMMAND_SLOTS)
-#define HW_PORT_PRIV_DMA_SZ \
-		(HW_CMD_SLOT_SZ + HW_CMD_TBL_AR_SZ + AHCI_RX_FIS_SZ)
+
+/* DMA region containing RX Fis, Identify, RLE10, and SMART buffers */
+#define AHCI_RX_FIS_SZ          0x100
+#define AHCI_RX_FIS_OFFSET      0x0
+#define AHCI_IDFY_SZ            ATA_SECT_SIZE
+#define AHCI_IDFY_OFFSET        0x400
+#define AHCI_SECTBUF_SZ         ATA_SECT_SIZE
+#define AHCI_SECTBUF_OFFSET     0x800
+#define AHCI_SMARTBUF_SZ        ATA_SECT_SIZE
+#define AHCI_SMARTBUF_OFFSET    0xC00
+/* 0x100 + 0x200 + 0x200 + 0x200 is smaller than 4k but we pad it out */
+#define BLOCK_DMA_ALLOC_SZ      4096
+
+/* DMA region containing command table (should be 8192 bytes) */
+#define AHCI_CMD_SLOT_SZ        sizeof(struct mtip_cmd_hdr)
+#define AHCI_CMD_TBL_SZ         (MTIP_MAX_COMMAND_SLOTS * AHCI_CMD_SLOT_SZ)
+#define AHCI_CMD_TBL_OFFSET     0x0
+
+/* DMA region per command (contains header and SGL) */
+#define AHCI_CMD_TBL_HDR_SZ     0x80
+#define AHCI_CMD_TBL_HDR_OFFSET 0x0
+#define AHCI_CMD_TBL_SGL_SZ     (MTIP_MAX_SG * sizeof(struct mtip_cmd_sg))
+#define AHCI_CMD_TBL_SGL_OFFSET AHCI_CMD_TBL_HDR_SZ
+#define CMD_DMA_ALLOC_SZ        (AHCI_CMD_TBL_SGL_SZ + AHCI_CMD_TBL_HDR_SZ)
+
 
 #define HOST_CAP_NZDMA		(1 << 19)
 #define HOST_HSORG		0xFC
@@ -899,8 +920,9 @@ static void mtip_handle_tfe(struct driver_data *dd)
 			fail_reason = "thermal shutdown";
 		}
 		if (buf[288] == 0xBF) {
+			set_bit(MTIP_DDF_SEC_LOCK_BIT, &dd->dd_flag);
 			dev_info(&dd->pdev->dev,
-				"Drive indicates rebuild has failed.\n");
+				"Drive indicates rebuild has failed. Secure erase required.\n");
 			fail_all_ncq_cmds = 1;
 			fail_reason = "rebuild failed";
 		}
@@ -1566,6 +1588,12 @@ static int mtip_get_identify(struct mtip_port *port, void __user *user_buffer)
 	}
 #endif
 
+	/* Check security locked state */
+	if (port->identify[128] & 0x4)
+		set_bit(MTIP_DDF_SEC_LOCK_BIT, &port->dd->dd_flag);
+	else
+		clear_bit(MTIP_DDF_SEC_LOCK_BIT, &port->dd->dd_flag);
+
 #ifdef MTIP_TRIM /* Disabling TRIM support temporarily */
 	/* Demux ID.DRAT & ID.RZAT to determine trim support */
 	if (port->identify[69] & (1 << 14) && port->identify[69] & (1 << 5))
@@ -1887,6 +1915,10 @@ static void mtip_dump_identify(struct mtip_port *port)
 	strlcpy(cbuf, (char *)(port->identify+27), 41);
 	dev_info(&port->dd->pdev->dev, "Model: %s\n", cbuf);
 
+	dev_info(&port->dd->pdev->dev, "Security: %04x %s\n",
+		port->identify[128],
+		port->identify[128] & 0x4 ? "(LOCKED)" : "");
+
 	if (mtip_hw_get_capacity(port->dd, &sectors))
 		dev_info(&port->dd->pdev->dev,
 			"Capacity: %llu sectors (%llu MB)\n",
@@ -3313,6 +3345,118 @@ st_out:
 }
 
 /*
+ * DMA region teardown
+ *
+ * @dd Pointer to driver_data structure
+ *
+ * return value
+ *      None
+ */
+static void mtip_dma_free(struct driver_data *dd)
+{
+	int i;
+	struct mtip_port *port = dd->port;
+
+	if (port->block1)
+		dmam_free_coherent(&dd->pdev->dev, BLOCK_DMA_ALLOC_SZ,
+					port->block1, port->block1_dma);
+
+	if (port->command_list) {
+		dmam_free_coherent(&dd->pdev->dev, AHCI_CMD_TBL_SZ,
+				port->command_list, port->command_list_dma);
+	}
+
+	for (i = 0; i < MTIP_MAX_COMMAND_SLOTS; i++) {
+		if (port->commands[i].command)
+			dmam_free_coherent(&dd->pdev->dev, CMD_DMA_ALLOC_SZ,
+				port->commands[i].command,
+				port->commands[i].command_dma);
+	}
+}
+
+/*
+ * DMA region setup
+ *
+ * @dd Pointer to driver_data structure
+ *
+ * return value
+ *      -ENOMEM Not enough free DMA region space to initialize driver
+ */
+static int mtip_dma_alloc(struct driver_data *dd)
+{
+	struct mtip_port *port = dd->port;
+	int i, rv = 0;
+	u32 host_cap_64 = readl(dd->mmio + HOST_CAP) & HOST_CAP_64;
+
+	/* Allocate dma memory for RX Fis, Identify, and Sector Bufffer */
+	port->block1 =
+		dmam_alloc_coherent(&dd->pdev->dev, BLOCK_DMA_ALLOC_SZ,
+					&port->block1_dma, GFP_KERNEL);
+	if (!port->block1)
+		return -ENOMEM;
+	memset(port->block1, 0, BLOCK_DMA_ALLOC_SZ);
+
+	/* Allocate dma memory for command list */
+	port->command_list =
+		dmam_alloc_coherent(&dd->pdev->dev, AHCI_CMD_TBL_SZ,
+					&port->command_list_dma, GFP_KERNEL);
+	if (!port->command_list) {
+		dmam_free_coherent(&dd->pdev->dev, BLOCK_DMA_ALLOC_SZ,
+					port->block1, port->block1_dma);
+		port->block1 = NULL;
+		port->block1_dma = 0;
+		return -ENOMEM;
+	}
+	memset(port->command_list, 0, AHCI_CMD_TBL_SZ);
+
+	/* Setup all pointers into first DMA region */
+	port->rxfis         = port->block1 + AHCI_RX_FIS_OFFSET;
+	port->rxfis_dma     = port->block1_dma + AHCI_RX_FIS_OFFSET;
+	port->identify      = port->block1 + AHCI_IDFY_OFFSET;
+	port->identify_dma  = port->block1_dma + AHCI_IDFY_OFFSET;
+	port->log_buf       = port->block1 + AHCI_SECTBUF_OFFSET;
+	port->log_buf_dma   = port->block1_dma + AHCI_SECTBUF_OFFSET;
+	port->smart_buf     = port->block1 + AHCI_SMARTBUF_OFFSET;
+	port->smart_buf_dma = port->block1_dma + AHCI_SMARTBUF_OFFSET;
+
+	/* Setup per command SGL DMA region */
+
+	/* Point the command headers at the command tables */
+	for (i = 0; i < MTIP_MAX_COMMAND_SLOTS; i++) {
+		port->commands[i].command =
+			dmam_alloc_coherent(&dd->pdev->dev, CMD_DMA_ALLOC_SZ,
+				&port->commands[i].command_dma, GFP_KERNEL);
+		if (!port->commands[i].command) {
+			rv = -ENOMEM;
+			mtip_dma_free(dd);
+			return rv;
+		}
+		memset(port->commands[i].command, 0, CMD_DMA_ALLOC_SZ);
+
+		port->commands[i].command_header = port->command_list +
+					(sizeof(struct mtip_cmd_hdr) * i);
+		port->commands[i].command_header_dma =
+					dd->port->command_list_dma +
+					(sizeof(struct mtip_cmd_hdr) * i);
+
+		if (host_cap_64)
+			port->commands[i].command_header->ctbau =
+				__force_bit2int cpu_to_le32(
+				(port->commands[i].command_dma >> 16) >> 16);
+
+		port->commands[i].command_header->ctba =
+				__force_bit2int cpu_to_le32(
+				port->commands[i].command_dma & 0xFFFFFFFF);
+
+		sg_init_table(port->commands[i].sg, MTIP_MAX_SG);
+
+		/* Mark command as currently inactive */
+		atomic_set(&dd->port->commands[i].active, 0);
+	}
+	return 0;
+}
+
+/*
  * Called once for each card.
  *
  * @dd Pointer to the driver data structure.
@@ -3370,83 +3514,10 @@ static int mtip_hw_init(struct driver_data *dd)
 	dd->port->mmio	= dd->mmio + PORT_OFFSET;
 	dd->port->dd	= dd;
 
-	/* Allocate memory for the command list. */
-	dd->port->command_list =
-		dmam_alloc_coherent(&dd->pdev->dev,
-			HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 4),
-			&dd->port->command_list_dma,
-			GFP_KERNEL);
-	if (!dd->port->command_list) {
-		dev_err(&dd->pdev->dev,
-			"Memory allocation: command list\n");
-		rv = -ENOMEM;
+	/* DMA allocations */
+	rv = mtip_dma_alloc(dd);
+	if (rv < 0)
 		goto out1;
-	}
-
-	/* Clear the memory we have allocated. */
-	memset(dd->port->command_list,
-		0,
-		HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 4));
-
-	/* Setup the addresse of the RX FIS. */
-	dd->port->rxfis	    = dd->port->command_list + HW_CMD_SLOT_SZ;
-	dd->port->rxfis_dma = dd->port->command_list_dma + HW_CMD_SLOT_SZ;
-
-	/* Setup the address of the command tables. */
-	dd->port->command_table	  = dd->port->rxfis + AHCI_RX_FIS_SZ;
-	dd->port->command_tbl_dma = dd->port->rxfis_dma + AHCI_RX_FIS_SZ;
-
-	/* Setup the address of the identify data. */
-	dd->port->identify     = dd->port->command_table +
-					HW_CMD_TBL_AR_SZ;
-	dd->port->identify_dma = dd->port->command_tbl_dma +
-					HW_CMD_TBL_AR_SZ;
-
-	/* Setup the address of the sector buffer - for some non-ncq cmds */
-	dd->port->sector_buffer	= (void *) dd->port->identify + ATA_SECT_SIZE;
-	dd->port->sector_buffer_dma = dd->port->identify_dma + ATA_SECT_SIZE;
-
-	/* Setup the address of the log buf - for read log command */
-	dd->port->log_buf = (void *)dd->port->sector_buffer  + ATA_SECT_SIZE;
-	dd->port->log_buf_dma = dd->port->sector_buffer_dma + ATA_SECT_SIZE;
-
-	/* Setup the address of the smart buf - for smart read data command */
-	dd->port->smart_buf = (void *)dd->port->log_buf  + ATA_SECT_SIZE;
-	dd->port->smart_buf_dma = dd->port->log_buf_dma + ATA_SECT_SIZE;
-
-
-	/* Point the command headers at the command tables. */
-	for (i = 0; i < num_command_slots; i++) {
-		dd->port->commands[i].command_header =
-					dd->port->command_list +
-					(sizeof(struct mtip_cmd_hdr) * i);
-		dd->port->commands[i].command_header_dma =
-					dd->port->command_list_dma +
-					(sizeof(struct mtip_cmd_hdr) * i);
-
-		dd->port->commands[i].command =
-			dd->port->command_table + (HW_CMD_TBL_SZ * i);
-		dd->port->commands[i].command_dma =
-			dd->port->command_tbl_dma + (HW_CMD_TBL_SZ * i);
-
-		if (readl(dd->mmio + HOST_CAP) & HOST_CAP_64)
-			dd->port->commands[i].command_header->ctbau =
-			__force_bit2int cpu_to_le32(
-			(dd->port->commands[i].command_dma >> 16) >> 16);
-		dd->port->commands[i].command_header->ctba =
-			__force_bit2int cpu_to_le32(
-			dd->port->commands[i].command_dma & 0xFFFFFFFF);
-
-		/*
-		 * If this is not done, a bug is reported by the stock
-		 * FC11 i386. Due to the fact that it has lots of kernel
-		 * debugging enabled.
-		 */
-		sg_init_table(dd->port->commands[i].sg, MTIP_MAX_SG);
-
-		/* Mark all commands as currently inactive.*/
-		atomic_set(&dd->port->commands[i].active, 0);
-	}
 
 	/* Setup the pointers to the extended s_active and CI registers. */
 	for (i = 0; i < dd->slot_groups; i++) {
@@ -3594,12 +3665,8 @@ out3:
 
 out2:
 	mtip_deinit_port(dd->port);
+	mtip_dma_free(dd);
 
-	/* Free the command/command header memory. */
-	dmam_free_coherent(&dd->pdev->dev,
-				HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 4),
-				dd->port->command_list,
-				dd->port->command_list_dma);
 out1:
 	/* Free the memory allocated for the for structure. */
 	kfree(dd->port);
@@ -3622,7 +3689,8 @@ static int mtip_hw_exit(struct driver_data *dd)
 	 * saves its state.
 	 */
 	if (!dd->sr) {
-		if (!test_bit(MTIP_DDF_REBUILD_FAILED_BIT, &dd->dd_flag))
+		if (!test_bit(MTIP_PF_REBUILD_BIT, &dd->port->flags) &&
+		    !test_bit(MTIP_DDF_SEC_LOCK_BIT, &dd->dd_flag))
 			if (mtip_standby_immediate(dd->port))
 				dev_warn(&dd->pdev->dev,
 					"STANDBY IMMEDIATE failed\n");
@@ -3641,11 +3709,9 @@ static int mtip_hw_exit(struct driver_data *dd)
 	irq_set_affinity_hint(dd->pdev->irq, NULL);
 	devm_free_irq(&dd->pdev->dev, dd->pdev->irq, dd);
 
-	/* Free the command/command header memory. */
-	dmam_free_coherent(&dd->pdev->dev,
-			HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 4),
-			dd->port->command_list,
-			dd->port->command_list_dma);
+	/* Free dma regions */
+	mtip_dma_free(dd);
+
 	/* Free the memory allocated for the for structure. */
 	kfree(dd->port);
 	dd->port = NULL;
diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h
index 9be7a1582ad3..b52e9a6d6aad 100644
--- a/drivers/block/mtip32xx/mtip32xx.h
+++ b/drivers/block/mtip32xx/mtip32xx.h
@@ -69,7 +69,7 @@
  * Maximum number of scatter gather entries
  * a single command may have.
  */
-#define MTIP_MAX_SG		128
+#define MTIP_MAX_SG		504
 
 /*
  * Maximum number of slot groups (Command Issue & s_active registers)
@@ -92,7 +92,7 @@
 
 /* Driver name and version strings */
 #define MTIP_DRV_NAME		"mtip32xx"
-#define MTIP_DRV_VERSION	"1.2.6os3"
+#define MTIP_DRV_VERSION	"1.3.0"
 
 /* Maximum number of minor device numbers per device. */
 #define MTIP_MAX_MINORS		16
@@ -391,15 +391,13 @@ struct mtip_port {
 	 */
 	dma_addr_t rxfis_dma;
 	/*
-	 * Pointer to the beginning of the command table memory as used
-	 * by the driver.
+	 * Pointer to the DMA region for RX Fis, Identify, RLE10, and SMART
 	 */
-	void *command_table;
+	void *block1;
 	/*
-	 * Pointer to the beginning of the command table memory as used
-	 * by the DMA.
+	 * DMA address of region for RX Fis, Identify, RLE10, and SMART
 	 */
-	dma_addr_t command_tbl_dma;
+	dma_addr_t block1_dma;
 	/*
 	 * Pointer to the beginning of the identify data memory as used
 	 * by the driver.