1 files changed, 26 insertions, 96 deletions

diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c
index 25538675d59e..89ced955fafa 100644
--- a/drivers/base/power/opp.c
+++ b/drivers/base/power/opp.c
@@ -15,7 +15,6 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/slab.h>
-#include <linux/cpufreq.h>
 #include <linux/device.h>
 #include <linux/list.h>
 #include <linux/rculist.h>
@@ -394,6 +393,13 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor);
  * to keep the integrity of the internal data structures. Callers should ensure
  * that this function is *NOT* called under RCU protection or in contexts where
  * mutex cannot be locked.
+ *
+ * Return:
+ * 0:		On success OR
+ *		Duplicate OPPs (both freq and volt are same) and opp->available
+ * -EEXIST:	Freq are same and volt are different OR
+ *		Duplicate OPPs (both freq and volt are same) and !opp->available
+ * -ENOMEM:	Memory allocation failure
  */
 int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt)
 {
@@ -443,15 +449,31 @@ int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt)
 	new_opp->u_volt = u_volt;
 	new_opp->available = true;
 
-	/* Insert new OPP in order of increasing frequency */
+	/*
+	 * Insert new OPP in order of increasing frequency
+	 * and discard if already present
+	 */
 	head = &dev_opp->opp_list;
 	list_for_each_entry_rcu(opp, &dev_opp->opp_list, node) {
-		if (new_opp->rate < opp->rate)
+		if (new_opp->rate <= opp->rate)
 			break;
 		else
 			head = &opp->node;
 	}
 
+	/* Duplicate OPPs ? */
+	if (new_opp->rate == opp->rate) {
+		int ret = opp->available && new_opp->u_volt == opp->u_volt ?
+			0 : -EEXIST;
+
+		dev_warn(dev, "%s: duplicate OPPs detected. Existing: freq: %lu, volt: %lu, enabled: %d. New: freq: %lu, volt: %lu, enabled: %d\n",
+			 __func__, opp->rate, opp->u_volt, opp->available,
+			 new_opp->rate, new_opp->u_volt, new_opp->available);
+		mutex_unlock(&dev_opp_list_lock);
+		kfree(new_opp);
+		return ret;
+	}
+
 	list_add_rcu(&new_opp->node, head);
 	mutex_unlock(&dev_opp_list_lock);
 
@@ -596,96 +618,6 @@ int dev_pm_opp_disable(struct device *dev, unsigned long freq)
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_disable);
 
-#ifdef CONFIG_CPU_FREQ
-/**
- * dev_pm_opp_init_cpufreq_table() - create a cpufreq table for a device
- * @dev:	device for which we do this operation
- * @table:	Cpufreq table returned back to caller
- *
- * Generate a cpufreq table for a provided device- this assumes that the
- * opp list is already initialized and ready for usage.
- *
- * This function allocates required memory for the cpufreq table. It is
- * expected that the caller does the required maintenance such as freeing
- * the table as required.
- *
- * Returns -EINVAL for bad pointers, -ENODEV if the device is not found, -ENOMEM
- * if no memory available for the operation (table is not populated), returns 0
- * if successful and table is populated.
- *
- * WARNING: It is  important for the callers to ensure refreshing their copy of
- * the table if any of the mentioned functions have been invoked in the interim.
- *
- * Locking: The internal device_opp and opp structures are RCU protected.
- * To simplify the logic, we pretend we are updater and hold relevant mutex here
- * Callers should ensure that this function is *NOT* called under RCU protection
- * or in contexts where mutex locking cannot be used.
- */
-int dev_pm_opp_init_cpufreq_table(struct device *dev,
-			    struct cpufreq_frequency_table **table)
-{
-	struct device_opp *dev_opp;
-	struct dev_pm_opp *opp;
-	struct cpufreq_frequency_table *freq_table;
-	int i = 0;
-
-	/* Pretend as if I am an updater */
-	mutex_lock(&dev_opp_list_lock);
-
-	dev_opp = find_device_opp(dev);
-	if (IS_ERR(dev_opp)) {
-		int r = PTR_ERR(dev_opp);
-		mutex_unlock(&dev_opp_list_lock);
-		dev_err(dev, "%s: Device OPP not found (%d)\n", __func__, r);
-		return r;
-	}
-
-	freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) *
-			     (dev_pm_opp_get_opp_count(dev) + 1), GFP_KERNEL);
-	if (!freq_table) {
-		mutex_unlock(&dev_opp_list_lock);
-		dev_warn(dev, "%s: Unable to allocate frequency table\n",
-			__func__);
-		return -ENOMEM;
-	}
-
-	list_for_each_entry(opp, &dev_opp->opp_list, node) {
-		if (opp->available) {
-			freq_table[i].driver_data = i;
-			freq_table[i].frequency = opp->rate / 1000;
-			i++;
-		}
-	}
-	mutex_unlock(&dev_opp_list_lock);
-
-	freq_table[i].driver_data = i;
-	freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	*table = &freq_table[0];
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_init_cpufreq_table);
-
-/**
- * dev_pm_opp_free_cpufreq_table() - free the cpufreq table
- * @dev:	device for which we do this operation
- * @table:	table to free
- *
- * Free up the table allocated by dev_pm_opp_init_cpufreq_table
- */
-void dev_pm_opp_free_cpufreq_table(struct device *dev,
-				struct cpufreq_frequency_table **table)
-{
-	if (!table)
-		return;
-
-	kfree(*table);
-	*table = NULL;
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_free_cpufreq_table);
-#endif		/* CONFIG_CPU_FREQ */
-
 /**
  * dev_pm_opp_get_notifier() - find notifier_head of the device with opp
  * @dev:	device pointer used to lookup device OPPs.
@@ -734,11 +666,9 @@ int of_init_opp_table(struct device *dev)
 		unsigned long freq = be32_to_cpup(val++) * 1000;
 		unsigned long volt = be32_to_cpup(val++);
 
-		if (dev_pm_opp_add(dev, freq, volt)) {
+		if (dev_pm_opp_add(dev, freq, volt))
 			dev_warn(dev, "%s: Failed to add OPP %ld\n",
 				 __func__, freq);
-			continue;
-		}
 		nr -= 2;
 	}