summaryrefslogtreecommitdiff
path: root/drivers/atm/ambassador.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/atm/ambassador.h')
-rw-r--r--drivers/atm/ambassador.h648
1 files changed, 0 insertions, 648 deletions
diff --git a/drivers/atm/ambassador.h b/drivers/atm/ambassador.h
deleted file mode 100644
index 086ceb8568dc..000000000000
--- a/drivers/atm/ambassador.h
+++ /dev/null
@@ -1,648 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- Madge Ambassador ATM Adapter driver.
- Copyright (C) 1995-1999 Madge Networks Ltd.
-
-*/
-
-#ifndef AMBASSADOR_H
-#define AMBASSADOR_H
-
-
-#ifdef CONFIG_ATM_AMBASSADOR_DEBUG
-#define DEBUG_AMBASSADOR
-#endif
-
-#define DEV_LABEL "amb"
-
-#ifndef PCI_VENDOR_ID_MADGE
-#define PCI_VENDOR_ID_MADGE 0x10B6
-#endif
-#ifndef PCI_VENDOR_ID_MADGE_AMBASSADOR
-#define PCI_DEVICE_ID_MADGE_AMBASSADOR 0x1001
-#endif
-#ifndef PCI_VENDOR_ID_MADGE_AMBASSADOR_BAD
-#define PCI_DEVICE_ID_MADGE_AMBASSADOR_BAD 0x1002
-#endif
-
-// diagnostic output
-
-#define PRINTK(severity,format,args...) \
- printk(severity DEV_LABEL ": " format "\n" , ## args)
-
-#ifdef DEBUG_AMBASSADOR
-
-#define DBG_ERR 0x0001
-#define DBG_WARN 0x0002
-#define DBG_INFO 0x0004
-#define DBG_INIT 0x0008
-#define DBG_LOAD 0x0010
-#define DBG_VCC 0x0020
-#define DBG_QOS 0x0040
-#define DBG_CMD 0x0080
-#define DBG_TX 0x0100
-#define DBG_RX 0x0200
-#define DBG_SKB 0x0400
-#define DBG_POOL 0x0800
-#define DBG_IRQ 0x1000
-#define DBG_FLOW 0x2000
-#define DBG_REGS 0x4000
-#define DBG_DATA 0x8000
-#define DBG_MASK 0xffff
-
-/* the ## prevents the annoying double expansion of the macro arguments */
-/* KERN_INFO is used since KERN_DEBUG often does not make it to the console */
-#define PRINTDB(bits,format,args...) \
- ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format , ## args) : 1 )
-#define PRINTDM(bits,format,args...) \
- ( (debug & (bits)) ? printk (format , ## args) : 1 )
-#define PRINTDE(bits,format,args...) \
- ( (debug & (bits)) ? printk (format "\n" , ## args) : 1 )
-#define PRINTD(bits,format,args...) \
- ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format "\n" , ## args) : 1 )
-
-#else
-
-#define PRINTD(bits,format,args...)
-#define PRINTDB(bits,format,args...)
-#define PRINTDM(bits,format,args...)
-#define PRINTDE(bits,format,args...)
-
-#endif
-
-#define PRINTDD(bits,format,args...)
-#define PRINTDDB(sec,fmt,args...)
-#define PRINTDDM(sec,fmt,args...)
-#define PRINTDDE(sec,fmt,args...)
-
-// tunable values (?)
-
-/* MUST be powers of two -- why ? */
-#define COM_Q_ENTRIES 8
-#define TX_Q_ENTRIES 32
-#define RX_Q_ENTRIES 64
-
-// fixed values
-
-// guessing
-#define AMB_EXTENT 0x80
-
-// Minimum allowed size for an Ambassador queue
-#define MIN_QUEUE_SIZE 2
-
-// Ambassador microcode allows 1 to 4 pools, we use 4 (simpler)
-#define NUM_RX_POOLS 4
-
-// minimum RX buffers required to cope with replenishing delay
-#define MIN_RX_BUFFERS 1
-
-// minimum PCI latency we will tolerate (32 IS TOO SMALL)
-#define MIN_PCI_LATENCY 64 // 255
-
-// VCs supported by card (VPI always 0)
-#define NUM_VPI_BITS 0
-#define NUM_VCI_BITS 10
-#define NUM_VCS 1024
-
-/* The status field bits defined so far. */
-#define RX_ERR 0x8000 // always present if there is an error (hmm)
-#define CRC_ERR 0x4000 // AAL5 CRC error
-#define LEN_ERR 0x2000 // overlength frame
-#define ABORT_ERR 0x1000 // zero length field in received frame
-#define UNUSED_ERR 0x0800 // buffer returned unused
-
-// Adaptor commands
-
-#define SRB_OPEN_VC 0
-/* par_0: dwordswap(VC_number) */
-/* par_1: dwordswap(flags<<16) or wordswap(flags)*/
-/* flags: */
-
-/* LANE: 0x0004 */
-/* NOT_UBR: 0x0008 */
-/* ABR: 0x0010 */
-
-/* RxPool0: 0x0000 */
-/* RxPool1: 0x0020 */
-/* RxPool2: 0x0040 */
-/* RxPool3: 0x0060 */
-
-/* par_2: dwordswap(fp_rate<<16) or wordswap(fp_rate) */
-
-#define SRB_CLOSE_VC 1
-/* par_0: dwordswap(VC_number) */
-
-#define SRB_GET_BIA 2
-/* returns */
-/* par_0: dwordswap(half BIA) */
-/* par_1: dwordswap(half BIA) */
-
-#define SRB_GET_SUNI_STATS 3
-/* par_0: dwordswap(physical_host_address) */
-
-#define SRB_SET_BITS_8 4
-#define SRB_SET_BITS_16 5
-#define SRB_SET_BITS_32 6
-#define SRB_CLEAR_BITS_8 7
-#define SRB_CLEAR_BITS_16 8
-#define SRB_CLEAR_BITS_32 9
-/* par_0: dwordswap(ATMizer address) */
-/* par_1: dwordswap(mask) */
-
-#define SRB_SET_8 10
-#define SRB_SET_16 11
-#define SRB_SET_32 12
-/* par_0: dwordswap(ATMizer address) */
-/* par_1: dwordswap(data) */
-
-#define SRB_GET_32 13
-/* par_0: dwordswap(ATMizer address) */
-/* returns */
-/* par_1: dwordswap(ATMizer data) */
-
-#define SRB_GET_VERSION 14
-/* returns */
-/* par_0: dwordswap(Major Version) */
-/* par_1: dwordswap(Minor Version) */
-
-#define SRB_FLUSH_BUFFER_Q 15
-/* Only flags to define which buffer pool; all others must be zero */
-/* par_0: dwordswap(flags<<16) or wordswap(flags)*/
-
-#define SRB_GET_DMA_SPEEDS 16
-/* returns */
-/* par_0: dwordswap(Read speed (bytes/sec)) */
-/* par_1: dwordswap(Write speed (bytes/sec)) */
-
-#define SRB_MODIFY_VC_RATE 17
-/* par_0: dwordswap(VC_number) */
-/* par_1: dwordswap(fp_rate<<16) or wordswap(fp_rate) */
-
-#define SRB_MODIFY_VC_FLAGS 18
-/* par_0: dwordswap(VC_number) */
-/* par_1: dwordswap(flags<<16) or wordswap(flags)*/
-
-/* flags: */
-
-/* LANE: 0x0004 */
-/* NOT_UBR: 0x0008 */
-/* ABR: 0x0010 */
-
-/* RxPool0: 0x0000 */
-/* RxPool1: 0x0020 */
-/* RxPool2: 0x0040 */
-/* RxPool3: 0x0060 */
-
-#define SRB_RATE_SHIFT 16
-#define SRB_POOL_SHIFT (SRB_FLAGS_SHIFT+5)
-#define SRB_FLAGS_SHIFT 16
-
-#define SRB_STOP_TASKING 19
-#define SRB_START_TASKING 20
-#define SRB_SHUT_DOWN 21
-#define MAX_SRB 21
-
-#define SRB_COMPLETE 0xffffffff
-
-#define TX_FRAME 0x80000000
-
-// number of types of SRB MUST be a power of two -- why?
-#define NUM_OF_SRB 32
-
-// number of bits of period info for rate
-#define MAX_RATE_BITS 6
-
-#define TX_UBR 0x0000
-#define TX_UBR_CAPPED 0x0008
-#define TX_ABR 0x0018
-#define TX_FRAME_NOTCAP 0x0000
-#define TX_FRAME_CAPPED 0x8000
-
-#define FP_155_RATE 0x24b1
-#define FP_25_RATE 0x1f9d
-
-/* #define VERSION_NUMBER 0x01000000 // initial release */
-/* #define VERSION_NUMBER 0x01010000 // fixed startup probs PLX MB0 not cleared */
-/* #define VERSION_NUMBER 0x01020000 // changed SUNI reset timings; allowed r/w onchip */
-
-/* #define VERSION_NUMBER 0x01030000 // clear local doorbell int reg on reset */
-/* #define VERSION_NUMBER 0x01040000 // PLX bug work around version PLUS */
-/* remove race conditions on basic interface */
-/* indicate to the host that diagnostics */
-/* have finished; if failed, how and what */
-/* failed */
-/* fix host memory test to fix PLX bug */
-/* allow flash upgrade and BIA upgrade directly */
-/* */
-#define VERSION_NUMBER 0x01050025 /* Jason's first hacked version. */
-/* Change in download algorithm */
-
-#define DMA_VALID 0xb728e149 /* completely random */
-
-#define FLASH_BASE 0xa0c00000
-#define FLASH_SIZE 0x00020000 /* 128K */
-#define BIA_BASE (FLASH_BASE+0x0001c000) /* Flash Sector 7 */
-#define BIA_ADDRESS ((void *)0xa0c1c000)
-#define PLX_BASE 0xe0000000
-
-typedef enum {
- host_memory_test = 1,
- read_adapter_memory,
- write_adapter_memory,
- adapter_start,
- get_version_number,
- interrupt_host,
- flash_erase_sector,
- adap_download_block = 0x20,
- adap_erase_flash,
- adap_run_in_iram,
- adap_end_download
-} loader_command;
-
-#define BAD_COMMAND (-1)
-#define COMMAND_IN_PROGRESS 1
-#define COMMAND_PASSED_TEST 2
-#define COMMAND_FAILED_TEST 3
-#define COMMAND_READ_DATA_OK 4
-#define COMMAND_READ_BAD_ADDRESS 5
-#define COMMAND_WRITE_DATA_OK 6
-#define COMMAND_WRITE_BAD_ADDRESS 7
-#define COMMAND_WRITE_FLASH_FAILURE 8
-#define COMMAND_COMPLETE 9
-#define COMMAND_FLASH_ERASE_FAILURE 10
-#define COMMAND_WRITE_BAD_DATA 11
-
-/* bit fields for mailbox[0] return values */
-
-#define GPINT_TST_FAILURE 0x00000001
-#define SUNI_DATA_PATTERN_FAILURE 0x00000002
-#define SUNI_DATA_BITS_FAILURE 0x00000004
-#define SUNI_UTOPIA_FAILURE 0x00000008
-#define SUNI_FIFO_FAILURE 0x00000010
-#define SRAM_FAILURE 0x00000020
-#define SELF_TEST_FAILURE 0x0000003f
-
-/* mailbox[1] = 0 in progress, -1 on completion */
-/* mailbox[2] = current test 00 00 test(8 bit) phase(8 bit) */
-/* mailbox[3] = last failure, 00 00 test(8 bit) phase(8 bit) */
-/* mailbox[4],mailbox[5],mailbox[6] random failure values */
-
-/* PLX/etc. memory map including command structure */
-
-/* These registers may also be memory mapped in PCI memory */
-
-#define UNUSED_LOADER_MAILBOXES 6
-
-typedef struct {
- u32 stuff[16];
- union {
- struct {
- u32 result;
- u32 ready;
- u32 stuff[UNUSED_LOADER_MAILBOXES];
- } loader;
- struct {
- u32 cmd_address;
- u32 tx_address;
- u32 rx_address[NUM_RX_POOLS];
- u32 gen_counter;
- u32 spare;
- } adapter;
- } mb;
- u32 doorbell;
- u32 interrupt;
- u32 interrupt_control;
- u32 reset_control;
-} amb_mem;
-
-/* RESET bit, IRQ (card to host) and doorbell (host to card) enable bits */
-#define AMB_RESET_BITS 0x40000000
-#define AMB_INTERRUPT_BITS 0x00000300
-#define AMB_DOORBELL_BITS 0x00030000
-
-/* loader commands */
-
-#define MAX_COMMAND_DATA 13
-#define MAX_TRANSFER_DATA 11
-
-typedef struct {
- __be32 address;
- __be32 count;
- __be32 data[MAX_TRANSFER_DATA];
-} transfer_block;
-
-typedef struct {
- __be32 result;
- __be32 command;
- union {
- transfer_block transfer;
- __be32 version;
- __be32 start;
- __be32 data[MAX_COMMAND_DATA];
- } payload;
- __be32 valid;
-} loader_block;
-
-/* command queue */
-
-/* Again all data are BIG ENDIAN */
-
-typedef struct {
- union {
- struct {
- __be32 vc;
- __be32 flags;
- __be32 rate;
- } open;
- struct {
- __be32 vc;
- __be32 rate;
- } modify_rate;
- struct {
- __be32 vc;
- __be32 flags;
- } modify_flags;
- struct {
- __be32 vc;
- } close;
- struct {
- __be32 lower4;
- __be32 upper2;
- } bia;
- struct {
- __be32 address;
- } suni;
- struct {
- __be32 major;
- __be32 minor;
- } version;
- struct {
- __be32 read;
- __be32 write;
- } speed;
- struct {
- __be32 flags;
- } flush;
- struct {
- __be32 address;
- __be32 data;
- } memory;
- __be32 par[3];
- } args;
- __be32 request;
-} command;
-
-/* transmit queues and associated structures */
-
-/* The hosts transmit structure. All BIG ENDIAN; host address
- restricted to first 1GByte, but address passed to the card must
- have the top MS bit or'ed in. -- check this */
-
-/* TX is described by 1+ tx_frags followed by a tx_frag_end */
-
-typedef struct {
- __be32 bytes;
- __be32 address;
-} tx_frag;
-
-/* apart from handle the fields here are for the adapter to play with
- and should be set to zero */
-
-typedef struct {
- u32 handle;
- u16 vc;
- u16 next_descriptor_length;
- u32 next_descriptor;
-#ifdef AMB_NEW_MICROCODE
- u8 cpcs_uu;
- u8 cpi;
- u16 pad;
-#endif
-} tx_frag_end;
-
-typedef struct {
- tx_frag tx_frag;
- tx_frag_end tx_frag_end;
- struct sk_buff * skb;
-} tx_simple;
-
-#if 0
-typedef union {
- tx_frag fragment;
- tx_frag_end end_of_list;
-} tx_descr;
-#endif
-
-/* this "points" to the sequence of fragments and trailer */
-
-typedef struct {
- __be16 vc;
- __be16 tx_descr_length;
- __be32 tx_descr_addr;
-} tx_in;
-
-/* handle is the handle from tx_in */
-
-typedef struct {
- u32 handle;
-} tx_out;
-
-/* receive frame structure */
-
-/* All BIG ENDIAN; handle is as passed from host; length is zero for
- aborted frames, and frames with errors. Header is actually VC
- number, lec-id is NOT yet supported. */
-
-typedef struct {
- u32 handle;
- __be16 vc;
- __be16 lec_id; // unused
- __be16 status;
- __be16 length;
-} rx_out;
-
-/* buffer supply structure */
-
-typedef struct {
- u32 handle;
- __be32 host_address;
-} rx_in;
-
-/* This first structure is the area in host memory where the adapter
- writes its pointer values. These pointer values are BIG ENDIAN and
- reside in the same 4MB 'page' as this structure. The host gives the
- adapter the address of this block by sending a doorbell interrupt
- to the adapter after downloading the code and setting it going. The
- addresses have the top 10 bits set to 1010000010b -- really?
-
- The host must initialise these before handing the block to the
- adapter. */
-
-typedef struct {
- __be32 command_start; /* SRB commands completions */
- __be32 command_end; /* SRB commands completions */
- __be32 tx_start;
- __be32 tx_end;
- __be32 txcom_start; /* tx completions */
- __be32 txcom_end; /* tx completions */
- struct {
- __be32 buffer_start;
- __be32 buffer_end;
- u32 buffer_q_get;
- u32 buffer_q_end;
- u32 buffer_aptr;
- __be32 rx_start; /* rx completions */
- __be32 rx_end;
- u32 rx_ptr;
- __be32 buffer_size; /* size of host buffer */
- } rec_struct[NUM_RX_POOLS];
-#ifdef AMB_NEW_MICROCODE
- u16 init_flags;
- u16 talk_block_spare;
-#endif
-} adap_talk_block;
-
-/* This structure must be kept in line with the vcr image in sarmain.h
-
- This is the structure in the host filled in by the adapter by
- GET_SUNI_STATS */
-
-typedef struct {
- u8 racp_chcs;
- u8 racp_uhcs;
- u16 spare;
- u32 racp_rcell;
- u32 tacp_tcell;
- u32 flags;
- u32 dropped_cells;
- u32 dropped_frames;
-} suni_stats;
-
-typedef enum {
- dead
-} amb_flags;
-
-#define NEXTQ(current,start,limit) \
- ( (current)+1 < (limit) ? (current)+1 : (start) )
-
-typedef struct {
- command * start;
- command * in;
- command * out;
- command * limit;
-} amb_cq_ptrs;
-
-typedef struct {
- spinlock_t lock;
- unsigned int pending;
- unsigned int high;
- unsigned int filled;
- unsigned int maximum; // size - 1 (q implementation)
- amb_cq_ptrs ptrs;
-} amb_cq;
-
-typedef struct {
- spinlock_t lock;
- unsigned int pending;
- unsigned int high;
- unsigned int filled;
- unsigned int maximum; // size - 1 (q implementation)
- struct {
- tx_in * start;
- tx_in * ptr;
- tx_in * limit;
- } in;
- struct {
- tx_out * start;
- tx_out * ptr;
- tx_out * limit;
- } out;
-} amb_txq;
-
-typedef struct {
- spinlock_t lock;
- unsigned int pending;
- unsigned int low;
- unsigned int emptied;
- unsigned int maximum; // size - 1 (q implementation)
- struct {
- rx_in * start;
- rx_in * ptr;
- rx_in * limit;
- } in;
- struct {
- rx_out * start;
- rx_out * ptr;
- rx_out * limit;
- } out;
- unsigned int buffers_wanted;
- unsigned int buffer_size;
-} amb_rxq;
-
-typedef struct {
- unsigned long tx_ok;
- struct {
- unsigned long ok;
- unsigned long error;
- unsigned long badcrc;
- unsigned long toolong;
- unsigned long aborted;
- unsigned long unused;
- } rx;
-} amb_stats;
-
-// a single struct pointed to by atm_vcc->dev_data
-
-typedef struct {
- u8 tx_vc_bits:7;
- u8 tx_present:1;
-} amb_tx_info;
-
-typedef struct {
- unsigned char pool;
-} amb_rx_info;
-
-typedef struct {
- amb_rx_info rx_info;
- u16 tx_frame_bits;
- unsigned int tx_rate;
- unsigned int rx_rate;
-} amb_vcc;
-
-struct amb_dev {
- u8 irq;
- unsigned long flags;
- u32 iobase;
- u32 * membase;
-
- amb_cq cq;
- amb_txq txq;
- amb_rxq rxq[NUM_RX_POOLS];
-
- struct mutex vcc_sf;
- amb_tx_info txer[NUM_VCS];
- struct atm_vcc * rxer[NUM_VCS];
- unsigned int tx_avail;
- unsigned int rx_avail;
-
- amb_stats stats;
-
- struct atm_dev * atm_dev;
- struct pci_dev * pci_dev;
- struct timer_list housekeeping;
-};
-
-typedef struct amb_dev amb_dev;
-
-#define AMB_DEV(atm_dev) ((amb_dev *) (atm_dev)->dev_data)
-#define AMB_VCC(atm_vcc) ((amb_vcc *) (atm_vcc)->dev_data)
-
-/* rate rounding */
-
-typedef enum {
- round_up,
- round_down,
- round_nearest
-} rounding;
-
-#endif
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-27 18:55:07 +0300