summaryrefslogtreecommitdiff
path: root/drivers/ata/pata_legacy.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_legacy.c')
-rw-r--r--drivers/ata/pata_legacy.c949
1 files changed, 949 insertions, 0 deletions
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
new file mode 100644
index 000000000000..10231ef731d1
--- /dev/null
+++ b/drivers/ata/pata_legacy.c
@@ -0,0 +1,949 @@
+/*
+ * pata-legacy.c - Legacy port PATA/SATA controller driver.
+ * Copyright 2005/2006 Red Hat <alan@redhat.com>, all rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * An ATA driver for the legacy ATA ports.
+ *
+ * Data Sources:
+ * Opti 82C465/82C611 support: Data sheets at opti-inc.com
+ * HT6560 series:
+ * Promise 20230/20620:
+ * http://www.ryston.cz/petr/vlb/pdc20230b.html
+ * http://www.ryston.cz/petr/vlb/pdc20230c.html
+ * http://www.ryston.cz/petr/vlb/pdc20630.html
+ *
+ * Unsupported but docs exist:
+ * Appian/Adaptec AIC25VL01/Cirrus Logic PD7220
+ * Winbond W83759A
+ *
+ * This driver handles legacy (that is "ISA/VLB side") IDE ports found
+ * on PC class systems. There are three hybrid devices that are exceptions
+ * The Cyrix 5510/5520 where a pre SFF ATA device is on the bridge and
+ * the MPIIX where the tuning is PCI side but the IDE is "ISA side".
+ *
+ * Specific support is included for the ht6560a/ht6560b/opti82c611a/
+ * opti82c465mv/promise 20230c/20630
+ *
+ * Use the autospeed and pio_mask options with:
+ * Appian ADI/2 aka CLPD7220 or AIC25VL01.
+ * Use the jumpers, autospeed and set pio_mask to the mode on the jumpers with
+ * Goldstar GM82C711, PIC-1288A-125, UMC 82C871F, Winbond W83759,
+ * Winbond W83759A, Promise PDC20230-B
+ *
+ * For now use autospeed and pio_mask as above with the W83759A. This may
+ * change.
+ *
+ * TODO
+ * Merge existing pata_qdi driver
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/ata.h>
+#include <linux/libata.h>
+#include <linux/platform_device.h>
+
+#define DRV_NAME "pata_legacy"
+#define DRV_VERSION "0.5.3"
+
+#define NR_HOST 6
+
+static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 };
+static int legacy_irq[NR_HOST] = { 15, 14, 11, 10, 8, 12 };
+
+struct legacy_data {
+ unsigned long timing;
+ u8 clock[2];
+ u8 last;
+ int fast;
+ struct platform_device *platform_dev;
+
+};
+
+static struct legacy_data legacy_data[NR_HOST];
+static struct ata_host *legacy_host[NR_HOST];
+static int nr_legacy_host;
+
+
+static int probe_all; /* Set to check all ISA port ranges */
+static int ht6560a; /* HT 6560A on primary 1, secondary 2, both 3 */
+static int ht6560b; /* HT 6560A on primary 1, secondary 2, both 3 */
+static int opti82c611a; /* Opti82c611A on primary 1, secondary 2, both 3 */
+static int opti82c46x; /* Opti 82c465MV present (pri/sec autodetect) */
+static int autospeed; /* Chip present which snoops speed changes */
+static int pio_mask = 0x1F; /* PIO range for autospeed devices */
+
+/**
+ * legacy_set_mode - mode setting
+ * @ap: IDE interface
+ *
+ * Use a non standard set_mode function. We don't want to be tuned.
+ *
+ * The BIOS configured everything. Our job is not to fiddle. Just use
+ * whatever PIO the hardware is using and leave it at that. When we
+ * get some kind of nice user driven API for control then we can
+ * expand on this as per hdparm in the base kernel.
+ */
+
+static void legacy_set_mode(struct ata_port *ap)
+{
+ int i;
+
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ struct ata_device *dev = &ap->device[i];
+ if (ata_dev_enabled(dev)) {
+ dev->pio_mode = XFER_PIO_0;
+ dev->xfer_mode = XFER_PIO_0;
+ dev->xfer_shift = ATA_SHIFT_PIO;
+ dev->flags |= ATA_DFLAG_PIO;
+ }
+ }
+}
+
+static struct scsi_host_template legacy_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .bios_param = ata_std_bios_param,
+};
+
+/*
+ * These ops are used if the user indicates the hardware
+ * snoops the commands to decide on the mode and handles the
+ * mode selection "magically" itself. Several legacy controllers
+ * do this. The mode range can be set if it is not 0x1F by setting
+ * pio_mask as well.
+ */
+
+static struct ata_port_operations simple_port_ops = {
+ .port_disable = ata_port_disable,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+
+ .data_xfer = ata_pio_data_xfer_noirq,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop
+};
+
+static struct ata_port_operations legacy_port_ops = {
+ .set_mode = legacy_set_mode,
+
+ .port_disable = ata_port_disable,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .error_handler = ata_bmdma_error_handler,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+
+ .data_xfer = ata_pio_data_xfer_noirq,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop
+};
+
+/*
+ * Promise 20230C and 20620 support
+ *
+ * This controller supports PIO0 to PIO2. We set PIO timings conservatively to
+ * allow for 50MHz Vesa Local Bus. The 20620 DMA support is weird being DMA to
+ * controller and PIO'd to the host and not supported.
+ */
+
+static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ int tries = 5;
+ int pio = adev->pio_mode - XFER_PIO_0;
+ u8 rt;
+ unsigned long flags;
+
+ /* Safe as UP only. Force I/Os to occur together */
+
+ local_irq_save(flags);
+
+ /* Unlock the control interface */
+ do
+ {
+ inb(0x1F5);
+ outb(inb(0x1F2) | 0x80, 0x1F2);
+ inb(0x1F2);
+ inb(0x3F6);
+ inb(0x3F6);
+ inb(0x1F2);
+ inb(0x1F2);
+ }
+ while((inb(0x1F2) & 0x80) && --tries);
+
+ local_irq_restore(flags);
+
+ outb(inb(0x1F4) & 0x07, 0x1F4);
+
+ rt = inb(0x1F3);
+ rt &= 0x07 << (3 * adev->devno);
+ if (pio)
+ rt |= (1 + 3 * pio) << (3 * adev->devno);
+
+ udelay(100);
+ outb(inb(0x1F2) | 0x01, 0x1F2);
+ udelay(100);
+ inb(0x1F5);
+
+}
+
+static void pdc_data_xfer_vlb(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data)
+{
+ struct ata_port *ap = adev->ap;
+ int slop = buflen & 3;
+ unsigned long flags;
+
+ if (ata_id_has_dword_io(adev->id)) {
+ local_irq_save(flags);
+
+ /* Perform the 32bit I/O synchronization sequence */
+ inb(ap->ioaddr.nsect_addr);
+ inb(ap->ioaddr.nsect_addr);
+ inb(ap->ioaddr.nsect_addr);
+
+ /* Now the data */
+
+ if (write_data)
+ outsl(ap->ioaddr.data_addr, buf, buflen >> 2);
+ else
+ insl(ap->ioaddr.data_addr, buf, buflen >> 2);
+
+ if (unlikely(slop)) {
+ u32 pad;
+ if (write_data) {
+ memcpy(&pad, buf + buflen - slop, slop);
+ outl(le32_to_cpu(pad), ap->ioaddr.data_addr);
+ } else {
+ pad = cpu_to_le16(inl(ap->ioaddr.data_addr));
+ memcpy(buf + buflen - slop, &pad, slop);
+ }
+ }
+ local_irq_restore(flags);
+ }
+ else
+ ata_pio_data_xfer_noirq(adev, buf, buflen, write_data);
+}
+
+static struct ata_port_operations pdc20230_port_ops = {
+ .set_piomode = pdc20230_set_piomode,
+
+ .port_disable = ata_port_disable,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .error_handler = ata_bmdma_error_handler,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+
+ .data_xfer = pdc_data_xfer_vlb,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop
+};
+
+/*
+ * Holtek 6560A support
+ *
+ * This controller supports PIO0 to PIO2 (no IORDY even though higher timings
+ * can be loaded).
+ */
+
+static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ u8 active, recover;
+ struct ata_timing t;
+
+ /* Get the timing data in cycles. For now play safe at 50Mhz */
+ ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
+
+ active = FIT(t.active, 2, 15);
+ recover = FIT(t.recover, 4, 15);
+
+ inb(0x3E6);
+ inb(0x3E6);
+ inb(0x3E6);
+ inb(0x3E6);
+
+ outb(recover << 4 | active, ap->ioaddr.device_addr);
+ inb(ap->ioaddr.status_addr);
+}
+
+static struct ata_port_operations ht6560a_port_ops = {
+ .set_piomode = ht6560a_set_piomode,
+
+ .port_disable = ata_port_disable,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .error_handler = ata_bmdma_error_handler,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+
+ .data_xfer = ata_pio_data_xfer, /* Check vlb/noirq */
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop
+};
+
+/*
+ * Holtek 6560B support
+ *
+ * This controller supports PIO0 to PIO4. We honour the BIOS/jumper FIFO setting
+ * unless we see an ATAPI device in which case we force it off.
+ *
+ * FIXME: need to implement 2nd channel support.
+ */
+
+static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ u8 active, recover;
+ struct ata_timing t;
+
+ /* Get the timing data in cycles. For now play safe at 50Mhz */
+ ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
+
+ active = FIT(t.active, 2, 15);
+ recover = FIT(t.recover, 2, 16);
+ recover &= 0x15;
+
+ inb(0x3E6);
+ inb(0x3E6);
+ inb(0x3E6);
+ inb(0x3E6);
+
+ outb(recover << 4 | active, ap->ioaddr.device_addr);
+
+ if (adev->class != ATA_DEV_ATA) {
+ u8 rconf = inb(0x3E6);
+ if (rconf & 0x24) {
+ rconf &= ~ 0x24;
+ outb(rconf, 0x3E6);
+ }
+ }
+ inb(ap->ioaddr.status_addr);
+}
+
+static struct ata_port_operations ht6560b_port_ops = {
+ .set_piomode = ht6560b_set_piomode,
+
+ .port_disable = ata_port_disable,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .error_handler = ata_bmdma_error_handler,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+
+ .data_xfer = ata_pio_data_xfer, /* FIXME: Check 32bit and noirq */
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop
+};
+
+/*
+ * Opti core chipset helpers
+ */
+
+/**
+ * opti_syscfg - read OPTI chipset configuration
+ * @reg: Configuration register to read
+ *
+ * Returns the value of an OPTI system board configuration register.
+ */
+
+static u8 opti_syscfg(u8 reg)
+{
+ unsigned long flags;
+ u8 r;
+
+ /* Uniprocessor chipset and must force cycles adjancent */
+ local_irq_save(flags);
+ outb(reg, 0x22);
+ r = inb(0x24);
+ local_irq_restore(flags);
+ return r;
+}
+
+/*
+ * Opti 82C611A
+ *
+ * This controller supports PIO0 to PIO3.
+ */
+
+static void opti82c611a_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ u8 active, recover, setup;
+ struct ata_timing t;
+ struct ata_device *pair = ata_dev_pair(adev);
+ int clock;
+ int khz[4] = { 50000, 40000, 33000, 25000 };
+ u8 rc;
+
+ /* Enter configuration mode */
+ inw(ap->ioaddr.error_addr);
+ inw(ap->ioaddr.error_addr);
+ outb(3, ap->ioaddr.nsect_addr);
+
+ /* Read VLB clock strapping */
+ clock = 1000000000 / khz[inb(ap->ioaddr.lbah_addr) & 0x03];
+
+ /* Get the timing data in cycles */
+ ata_timing_compute(adev, adev->pio_mode, &t, clock, 1000);
+
+ /* Setup timing is shared */
+ if (pair) {
+ struct ata_timing tp;
+ ata_timing_compute(pair, pair->pio_mode, &tp, clock, 1000);
+
+ ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
+ }
+
+ active = FIT(t.active, 2, 17) - 2;
+ recover = FIT(t.recover, 1, 16) - 1;
+ setup = FIT(t.setup, 1, 4) - 1;
+
+ /* Select the right timing bank for write timing */
+ rc = inb(ap->ioaddr.lbal_addr);
+ rc &= 0x7F;
+ rc |= (adev->devno << 7);
+ outb(rc, ap->ioaddr.lbal_addr);
+
+ /* Write the timings */
+ outb(active << 4 | recover, ap->ioaddr.error_addr);
+
+ /* Select the right bank for read timings, also
+ load the shared timings for address */
+ rc = inb(ap->ioaddr.device_addr);
+ rc &= 0xC0;
+ rc |= adev->devno; /* Index select */
+ rc |= (setup << 4) | 0x04;
+ outb(rc, ap->ioaddr.device_addr);
+
+ /* Load the read timings */
+ outb(active << 4 | recover, ap->ioaddr.data_addr);
+
+ /* Ensure the timing register mode is right */
+ rc = inb (ap->ioaddr.lbal_addr);
+ rc &= 0x73;
+ rc |= 0x84;
+ outb(rc, ap->ioaddr.lbal_addr);
+
+ /* Exit command mode */
+ outb(0x83, ap->ioaddr.nsect_addr);
+}
+
+
+static struct ata_port_operations opti82c611a_port_ops = {
+ .set_piomode = opti82c611a_set_piomode,
+
+ .port_disable = ata_port_disable,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .error_handler = ata_bmdma_error_handler,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+
+ .data_xfer = ata_pio_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop
+};
+
+/*
+ * Opti 82C465MV
+ *
+ * This controller supports PIO0 to PIO3. Unlike the 611A the MVB
+ * version is dual channel but doesn't have a lot of unique registers.
+ */
+
+static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ u8 active, recover, setup;
+ struct ata_timing t;
+ struct ata_device *pair = ata_dev_pair(adev);
+ int clock;
+ int khz[4] = { 50000, 40000, 33000, 25000 };
+ u8 rc;
+ u8 sysclk;
+
+ /* Get the clock */
+ sysclk = opti_syscfg(0xAC) & 0xC0; /* BIOS set */
+
+ /* Enter configuration mode */
+ inw(ap->ioaddr.error_addr);
+ inw(ap->ioaddr.error_addr);
+ outb(3, ap->ioaddr.nsect_addr);
+
+ /* Read VLB clock strapping */
+ clock = 1000000000 / khz[sysclk];
+
+ /* Get the timing data in cycles */
+ ata_timing_compute(adev, adev->pio_mode, &t, clock, 1000);
+
+ /* Setup timing is shared */
+ if (pair) {
+ struct ata_timing tp;
+ ata_timing_compute(pair, pair->pio_mode, &tp, clock, 1000);
+
+ ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
+ }
+
+ active = FIT(t.active, 2, 17) - 2;
+ recover = FIT(t.recover, 1, 16) - 1;
+ setup = FIT(t.setup, 1, 4) - 1;
+
+ /* Select the right timing bank for write timing */
+ rc = inb(ap->ioaddr.lbal_addr);
+ rc &= 0x7F;
+ rc |= (adev->devno << 7);
+ outb(rc, ap->ioaddr.lbal_addr);
+
+ /* Write the timings */
+ outb(active << 4 | recover, ap->ioaddr.error_addr);
+
+ /* Select the right bank for read timings, also
+ load the shared timings for address */
+ rc = inb(ap->ioaddr.device_addr);
+ rc &= 0xC0;
+ rc |= adev->devno; /* Index select */
+ rc |= (setup << 4) | 0x04;
+ outb(rc, ap->ioaddr.device_addr);
+
+ /* Load the read timings */
+ outb(active << 4 | recover, ap->ioaddr.data_addr);
+
+ /* Ensure the timing register mode is right */
+ rc = inb (ap->ioaddr.lbal_addr);
+ rc &= 0x73;
+ rc |= 0x84;
+ outb(rc, ap->ioaddr.lbal_addr);
+
+ /* Exit command mode */
+ outb(0x83, ap->ioaddr.nsect_addr);
+
+ /* We need to know this for quad device on the MVB */
+ ap->host->private_data = ap;
+}
+
+/**
+ * opt82c465mv_qc_issue_prot - command issue
+ * @qc: command pending
+ *
+ * Called when the libata layer is about to issue a command. We wrap
+ * this interface so that we can load the correct ATA timings. The
+ * MVB has a single set of timing registers and these are shared
+ * across channels. As there are two registers we really ought to
+ * track the last two used values as a sort of register window. For
+ * now we just reload on a channel switch. On the single channel
+ * setup this condition never fires so we do nothing extra.
+ *
+ * FIXME: dual channel needs ->serialize support
+ */
+
+static unsigned int opti82c46x_qc_issue_prot(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_device *adev = qc->dev;
+
+ /* If timings are set and for the wrong channel (2nd test is
+ due to a libata shortcoming and will eventually go I hope) */
+ if (ap->host->private_data != ap->host
+ && ap->host->private_data != NULL)
+ opti82c46x_set_piomode(ap, adev);
+
+ return ata_qc_issue_prot(qc);
+}
+
+static struct ata_port_operations opti82c46x_port_ops = {
+ .set_piomode = opti82c46x_set_piomode,
+
+ .port_disable = ata_port_disable,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .error_handler = ata_bmdma_error_handler,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = opti82c46x_qc_issue_prot,
+
+ .data_xfer = ata_pio_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop
+};
+
+
+/**
+ * legacy_init_one - attach a legacy interface
+ * @port: port number
+ * @io: I/O port start
+ * @ctrl: control port
+ * @irq: interrupt line
+ *
+ * Register an ISA bus IDE interface. Such interfaces are PIO and we
+ * assume do not support IRQ sharing.
+ */
+
+static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl, int irq)
+{
+ struct legacy_data *ld = &legacy_data[nr_legacy_host];
+ struct ata_probe_ent ae;
+ struct platform_device *pdev;
+ int ret = -EBUSY;
+ struct ata_port_operations *ops = &legacy_port_ops;
+ int pio_modes = pio_mask;
+ u32 mask = (1 << port);
+
+ if (request_region(io, 8, "pata_legacy") == NULL)
+ return -EBUSY;
+ if (request_region(ctrl, 1, "pata_legacy") == NULL)
+ goto fail_io;
+
+ pdev = platform_device_register_simple(DRV_NAME, nr_legacy_host, NULL, 0);
+ if (pdev == NULL)
+ goto fail_dev;
+
+ if (ht6560a & mask) {
+ ops = &ht6560a_port_ops;
+ pio_modes = 0x07;
+ }
+ if (ht6560b & mask) {
+ ops = &ht6560b_port_ops;
+ pio_modes = 0x1F;
+ }
+ if (opti82c611a & mask) {
+ ops = &opti82c611a_port_ops;
+ pio_modes = 0x0F;
+ }
+ if (opti82c46x & mask) {
+ ops = &opti82c46x_port_ops;
+ pio_modes = 0x0F;
+ }
+
+ /* Probe for automatically detectable controllers */
+
+ if (io == 0x1F0 && ops == &legacy_port_ops) {
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ /* Probes */
+ inb(0x1F5);
+ outb(inb(0x1F2) | 0x80, 0x1F2);
+ inb(0x1F2);
+ inb(0x3F6);
+ inb(0x3F6);
+ inb(0x1F2);
+ inb(0x1F2);
+
+ if ((inb(0x1F2) & 0x80) == 0) {
+ /* PDC20230c or 20630 ? */
+ printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller detected.\n");
+ pio_modes = 0x07;
+ ops = &pdc20230_port_ops;
+ udelay(100);
+ inb(0x1F5);
+ } else {
+ outb(0x55, 0x1F2);
+ inb(0x1F2);
+ inb(0x1F2);
+ if (inb(0x1F2) == 0x00) {
+ printk(KERN_INFO "PDC20230-B VLB ATA controller detected.\n");
+ }
+ }
+ local_irq_restore(flags);
+ }
+
+
+ /* Chip does mode setting by command snooping */
+ if (ops == &legacy_port_ops && (autospeed & mask))
+ ops = &simple_port_ops;
+ memset(&ae, 0, sizeof(struct ata_probe_ent));
+ INIT_LIST_HEAD(&ae.node);
+ ae.dev = &pdev->dev;
+ ae.port_ops = ops;
+ ae.sht = &legacy_sht;
+ ae.n_ports = 1;
+ ae.pio_mask = pio_modes;
+ ae.irq = irq;
+ ae.irq_flags = 0;
+ ae.port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST;
+ ae.port[0].cmd_addr = io;
+ ae.port[0].altstatus_addr = ctrl;
+ ae.port[0].ctl_addr = ctrl;
+ ata_std_ports(&ae.port[0]);
+ ae.private_data = ld;
+
+ ret = ata_device_add(&ae);
+ if (ret == 0) {
+ ret = -ENODEV;
+ goto fail;
+ }
+ legacy_host[nr_legacy_host++] = dev_get_drvdata(&pdev->dev);
+ ld->platform_dev = pdev;
+ return 0;
+
+fail:
+ platform_device_unregister(pdev);
+fail_dev:
+ release_region(ctrl, 1);
+fail_io:
+ release_region(io, 8);
+ return ret;
+}
+
+/**
+ * legacy_check_special_cases - ATA special cases
+ * @p: PCI device to check
+ * @master: set this if we find an ATA master
+ * @master: set this if we find an ATA secondary
+ *
+ * A small number of vendors implemented early PCI ATA interfaces on bridge logic
+ * without the ATA interface being PCI visible. Where we have a matching PCI driver
+ * we must skip the relevant device here. If we don't know about it then the legacy
+ * driver is the right driver anyway.
+ */
+
+static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *secondary)
+{
+ /* Cyrix CS5510 pre SFF MWDMA ATA on the bridge */
+ if (p->vendor == 0x1078 && p->device == 0x0000) {
+ *primary = *secondary = 1;
+ return;
+ }
+ /* Cyrix CS5520 pre SFF MWDMA ATA on the bridge */
+ if (p->vendor == 0x1078 && p->device == 0x0002) {
+ *primary = *secondary = 1;
+ return;
+ }
+ /* Intel MPIIX - PIO ATA on non PCI side of bridge */
+ if (p->vendor == 0x8086 && p->device == 0x1234) {
+ u16 r;
+ pci_read_config_word(p, 0x6C, &r);
+ if (r & 0x8000) { /* ATA port enabled */
+ if (r & 0x4000)
+ *secondary = 1;
+ else
+ *primary = 1;
+ }
+ return;
+ }
+}
+
+
+/**
+ * legacy_init - attach legacy interfaces
+ *
+ * Attach legacy IDE interfaces by scanning the usual IRQ/port suspects.
+ * Right now we do not scan the ide0 and ide1 address but should do so
+ * for non PCI systems or systems with no PCI IDE legacy mode devices.
+ * If you fix that note there are special cases to consider like VLB
+ * drivers and CS5510/20.
+ */
+
+static __init int legacy_init(void)
+{
+ int i;
+ int ct = 0;
+ int primary = 0;
+ int secondary = 0;
+ int last_port = NR_HOST;
+
+ struct pci_dev *p = NULL;
+
+ for_each_pci_dev(p) {
+ int r;
+ /* Check for any overlap of the system ATA mappings. Native mode controllers
+ stuck on these addresses or some devices in 'raid' mode won't be found by
+ the storage class test */
+ for (r = 0; r < 6; r++) {
+ if (pci_resource_start(p, r) == 0x1f0)
+ primary = 1;
+ if (pci_resource_start(p, r) == 0x170)
+ secondary = 1;
+ }
+ /* Check for special cases */
+ legacy_check_special_cases(p, &primary, &secondary);
+
+ /* If PCI bus is present then don't probe for tertiary legacy ports */
+ if (probe_all == 0)
+ last_port = 2;
+ }
+
+ /* If an OPTI 82C46X is present find out where the channels are */
+ if (opti82c46x) {
+ static const char *optis[4] = {
+ "3/463MV", "5MV",
+ "5MVA", "5MVB"
+ };
+ u8 chans = 1;
+ u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6;
+
+ opti82c46x = 3; /* Assume master and slave first */
+ printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n", optis[ctrl]);
+ if (ctrl == 3)
+ chans = (opti_syscfg(0x3F) & 0x20) ? 2 : 1;
+ ctrl = opti_syscfg(0xAC);
+ /* Check enabled and this port is the 465MV port. On the
+ MVB we may have two channels */
+ if (ctrl & 8) {
+ if (ctrl & 4)
+ opti82c46x = 2; /* Slave */
+ else
+ opti82c46x = 1; /* Master */
+ if (chans == 2)
+ opti82c46x = 3; /* Master and Slave */
+ } /* Slave only */
+ else if (chans == 1)
+ opti82c46x = 1;
+ }
+
+ for (i = 0; i < last_port; i++) {
+ /* Skip primary if we have seen a PCI one */
+ if (i == 0 && primary == 1)
+ continue;
+ /* Skip secondary if we have seen a PCI one */
+ if (i == 1 && secondary == 1)
+ continue;
+ if (legacy_init_one(i, legacy_port[i],
+ legacy_port[i] + 0x0206,
+ legacy_irq[i]) == 0)
+ ct++;
+ }
+ if (ct != 0)
+ return 0;
+ return -ENODEV;
+}
+
+static __exit void legacy_exit(void)
+{
+ int i;
+
+ for (i = 0; i < nr_legacy_host; i++) {
+ struct legacy_data *ld = &legacy_data[i];
+ struct ata_port *ap =legacy_host[i]->ports[0];
+ unsigned long io = ap->ioaddr.cmd_addr;
+ unsigned long ctrl = ap->ioaddr.ctl_addr;
+ ata_host_remove(legacy_host[i]);
+ platform_device_unregister(ld->platform_dev);
+ if (ld->timing)
+ release_region(ld->timing, 2);
+ release_region(io, 8);
+ release_region(ctrl, 1);
+ }
+}
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for legacy ATA");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+module_param(probe_all, int, 0);
+module_param(autospeed, int, 0);
+module_param(ht6560a, int, 0);
+module_param(ht6560b, int, 0);
+module_param(opti82c611a, int, 0);
+module_param(opti82c46x, int, 0);
+module_param(pio_mask, int, 0);
+
+module_init(legacy_init);
+module_exit(legacy_exit);
+
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-28 10:22:53 +0300